A bath screen is a structure made from various materials and is used to hide communications. From a constructive point of view, there are several options for such protective panels, which allows you to choose the most suitable product for a specific interior. Screens allow you not only to protect pipes from moisture, but also to decorate a room, making it more functional and original.

Today, bath screens are classified into two main groups:

Solid;

sliding

Solid models are the most common and are characterized by simplicity. However, the simplicity of the design does not affect its effectiveness. The cladding of such a product, as a rule, is made with the same materials as the rest of the room (for example, tiles). Thanks to this, the panel fits organically into the interior of the bathroom.

Sliding models, in turn, are more functional. The design of such screens allows you to organize storage shelves under the bathroom household chemicals and other household items. Buy a bath screen sliding type You can find it in any construction hypermarket or specialized store. It is also easy to choose and order the product you like via the Internet.

Advantages and disadvantages of solid models

Arranging a solid screen in the bathroom allows you to achieve harmony in the interior of the room. The cladding for such a screen can be very different, but most often they use decorative tiles or mosaic. Products lined with mosaics look the most aesthetically pleasing. Let's look at the advantages of solid models in more detail:

• this design has a long service life;
• Solid tile bath screens are easy to clean. To clean the dirt, just use a damp cloth or sponge.

However, such panels also have some disadvantages that are worth paying attention to:

• in some cases, the small dimensions of the viewing window are not enough to carry out repair work under the bath;
• inability to store household chemicals under the bathroom;
• If such a panel is available, replacing the bowl is accompanied by some difficulties, since the structure will have to be dismantled.

Note! To access the communications located under the bathtub bowl, it is necessary to install an inspection hatch of sufficient size. If there is such a hatch, there are no problems with repairing pipes, since dismantling the shielding is eliminated.

Thus, a solid screen is an excellent solution for the bathroom interior, but its use is associated with some inconveniences.

Bath screen sizes

Protective panels differ not only in their design, but also in size. There are both standard and non-standard screen models. Today, the minimum length of these products is 105 cm, and the maximum can reach 190 cm.

Let's look at the dimensions of the most common screens:

• length – 150, 170 cm;
• width – from 50 to 56 cm;
• thickness – 3 mm.

Less common model sizes are 160, 180 and 190 cm. Screening non-standard bathtubs is much more difficult, since it is not always possible to find a suitable product on sale. Bath screens 150 cm are the most common and are easy to install.

Solid panels are equipped with legs, which are necessary for adjusting or adjusting the product. Bath screens 170 cm are also standard and are used much more often than models whose length is 180 or 190 cm.

Screen design differences

The construction market offers many varieties of such panels to suit every taste. They differ in design and functionality. Many companies are engaged in the production of custom bath screens, which allows us to say with confidence that large selection these products.

Let's consider the types of such protective panels, depending on the design features:

• standard;
• multifunctional;
• end

Standard models are the most common and consist of a plastic panel for which a frame of appropriate dimensions is selected. The multifunctional version differs from the standard one in that it has the ability to adjust the size of the screen under the bath (due to the legs). End panels are used to hide only a certain part of the bathroom.

Helpful advice! Today you can find products equipped with various auxiliary elements that are necessary for convenience. Such products include panels with shelves, handles for people with limited mobility, as well as screens that include a hole for the legs.

Photos of screens for bathtubs can be easily found on the Internet, which greatly simplifies their selection.

Related article:

Types, advantages and disadvantages of sliding screens. Selection rules. Do-it-yourself assembly and installation of a sliding screen.

Features of plastic models

Plastic shielding options are the most popular today. They are distinguished by their attractive cost, as well as ease of installation and operation. The service life of such panels can reach 10 years (provided proper care after them). Plastic screens are resistant to moisture and do not rot over time.

The main advantage of panels made of this material is the variety of colors. This is due to the ease of production of products from polymers. The functionality of such screens may also differ. In specialized stores you can buy plastic screens for bathtubs with shelves, sliding, solid, removable, folding, etc.

If desired, you can perform shielding yourself. To do this, you will need inexpensive polymer lining. Such a panel does not require additional facing work, which has a positive effect on financial costs. To fix the plastic lining, it is necessary to mount a profile made of wood or metal.

The main disadvantage of plastic screens of any type is their poor resistance to mechanical stress (shocks). At self-installation plastic solid screen, you need to take care of organizing the door under the bath for quick access to hidden communications. You can make a special door yourself or purchase it in a store.

Acrylic bath screens

A popular type of protective panels, which is often sold complete with the acrylic bathtubs themselves. Such products are made from plastic material, which is subsequently treated with an acrylic layer. All of them are individually designed. Therefore, experts do not recommend buying acrylic models separately from bathtubs, as finding suitable option almost impossible.

Acrylic panels are only suitable for installation under bathtubs made of the same material. In most cases, such panels are solid, however, other varieties can be found on sale. If it is not possible to purchase a suitable screen for a specific bathtub purchased previously, it is recommended to buy a custom-made screen for the bathtub.

Note! Acrylic models have the same colors as the bathtub, which allows the overall design to look organic.

One of the advantages can also be noted that such panels fit tightly to the sides of the bowl. The frame and fixing elements for fastening the panel are supplied to customers complete with the screen itself.

Screens made of MDF sheets and mirrors

MDF bath screen is most often used in classic design rooms, as they have a wood pattern. A wide range of colors and textures allows you to choose a product that will suit any interior. MDF shielding looks stylish and expensive, which often attracts buyers. However, when purchasing such a screen, you need to pay attention to two important points:

• products made from this material are only suitable for standard, rectangular bathtubs;
• MDF screens are made by compressing sawdust, so they are not resistant to moisture. In order to solve this problem, it is necessary to choose a moisture-resistant material that is equipped with a protective film.

The demand for mirrored models is quite simple to explain. Most modern bathrooms are small in size, and a mirror surface can visually increase the space of a room. Such panels also add play of light. They can be mounted at different angles, and also equipped with special lighting (for example, neon).

In any case, the mirror screen looks very impressive. However, such panels are not without their drawbacks, including fragility and difficult maintenance. Drops of water and stains on a mirror surface are much more noticeable than on any other surface, so you will have to wipe them quite often.

You can make a screen from MDF with your own hands, which will be exactly the same as

Drywall bath screen

Panels that are made from plasterboard material, are accessible and inexpensive. Organizing plasterboard shielding is quite simple with your own hands. In most cases, after installing a plasterboard screen, it is covered with ceramic tiles.

Important! To screen the space under the bathtub, it is necessary to use a moisture-resistant type of plasterboard sheet.

Let's look at the process of installing screens for plasterboard bathtubs:

1. First of all, you need to assemble the frame. The material for assembling the frame is timber with dimensions of 40x40 mm. At this stage, fixing elements and metal corners are installed.
2. Next, markings are applied to the walls and floor, which are needed for orientation during the installation process.
3. After applying the markings, the slats are installed along them. The slats are installed in both vertical and horizontal planes.
4. Next, the front panel is cut out of the plasterboard sheet, onto which hinged hinges or latches are installed.
5. The product is installed and an inspection hole is made in it.

Ceramic screens for bathrooms

Ceramic shielding allows you to organically decorate your plumbing unit. The main advantage of organizing a ceramic protective panel is that it looks as presentable as possible. Ceramic tiles are the main finishing material when organizing plasterboard screens, as well as tongue-and-groove slabs. Ceramic tiles are resistant to moisture, easy to clean, and also resistant to mechanical stress.

Installing a screen under a tile bathtub is quite simple. To carry out installation, you do not need to have special construction knowledge and skills.

• first you need to take measurements (width and height of the opening under the bathroom);
• styling ceramic tiles produced from the left top corner. Very important point is that installation must be done strictly horizontally;
• each individual tile element must be lubricated with tile adhesive;
• The alignment of a ceramic screen consisting of tiles is carried out using special crosses. Such crosses are inserted into the gaps between the tiles and form the same distance for all structural elements;
• Not only solid screens can be covered with tiles.

Bath curtain made of curtain fabric

People who have a hard bath panel installed constantly touch it with their feet. Bathtubs with such panels are inconvenient to clean. Using a curtain solves this problem.

Note! This non-standard solution Suitable only for rooms with good ventilation, since the curtain is not able to protect the pipes from moist air.

Before purchasing a bathtub protection panel, you need to pay attention to the following points:

• Before purchasing a panel, it is recommended to take measurements of the bathroom and bowl;
• the choice of product design depends on two factors: the financial capabilities of the buyer and the dimensions of the bathroom. For example, it is not recommended to purchase folding screen models for bathrooms, the dimensions of which are standard. For small rooms Solid models are best;
• a model with doors allows you not only to protect communications, but also to organize a small storage area under the bathroom for household chemicals and other items;

• It is recommended to pay attention to the material from which the panel fittings are made. It is very important that the material has good resistance to corrosion;
• the panel must be freely adjustable, so you need to check the legs before purchasing the product;
• Aluminum is considered the optimal material for the panel frame;
• MDF bathroom screens are suitable for rooms equipped with good ventilation system. Otherwise, due to stagnation of moisture, this material can quickly become unusable.

The design of the panel is selected depending on the individual preferences of the apartment owners. Assembling a bath screen with your own hands will save you a lot of money.

Riho baths

How to make a bathtub screen with your own hands from plasterboard and tiles

Before the beginning self-assembly For a solid panel, you need to prepare the following tools and materials:

• drywall;
• building level;
• facing tiles;
• grout for facing tile joints;
• grinder, drill, screwdriver;
• special sealing compound.

Assembling a plasterboard panel is a common activity. This is due to the availability of the material, financial benefits and ease of execution of the shield. The moisture-resistant plasterboard used for these purposes has good flexibility, which makes it possible to create a panel of non-standard shape.

How to make screens under the bathroom with your own hands? Let's consider the sequence of actions:

1. First the marking is done. Markings must be applied to the walls and floor, which will eliminate installation errors in the future.

1. At the second stage it is necessary to form frame structure for the panel. The frame can be made from wooden slats or metal profiles. To assemble the frame, you need a drill and a screwdriver.
2. After the frame is ready, it is necessary to cover it with plasterboard sheets. For this, special self-tapping screws for drywall are used.
3. Next, you need to fill all the seams and joints in the resulting structure with a hermetic compound.
4. At this stage, the façade part of the plasterboard panel is treated with a primer.
5. At the end, the plasterboard panel is faced with ceramic tiles.

Helpful advice! Experts recommend treating frame elements with protective compounds. This is necessary to improve the moisture-resistant qualities of the structure.

Thus, assembling a panel for a plasterboard bathtub with your own hands is not difficult. And the finished screen will significantly improve the appearance of the bathroom. If necessary, you can buy bath screens in a specialized store or on the Internet.

Installation of a plastic or acrylic screen on a bathtub

As a rule, the panel comes with instructions, which must be studied before installing the screen under the bathtub. For designs that differ only in size, the assembly process will not be much different. The main differences in this case boil down to the fact that the legs for the shields are under high bath have additional height reserve (approximately 5 cm).

Let's take a step-by-step look at how to install a screen under a bathtub:

1. Before installing this structure, it is recommended to fill the bath with water.
2. It is necessary to install special handles on the outer panel of the screen, which are mounted for ease of use of the structure.
3. The legs of the product come separately. They must be inserted into the holes located on the bottom side of the screen.
4. Next, you need to place the panel under the side of the bathtub.
5. After this, the structure must be fixed using auxiliary components.

In some cases, the bathroom is distinguished by the fact that it has protruding communications or baseboards, the presence of which prevents the shield from completely covering the free space under the bathroom. How to install a screen under the bathtub in such a situation? It is best to measure the parameters of the protruding elements and make a corresponding hole in the screen. Then the screen will not bump into a protruding element plumbing unit. Of course, you can remodel a bathroom, but this more labor-intensive and expensive undertaking is not suitable for everyone.

How to install a screen on an acrylic bathtub?

To install the screen on acrylic bath it is necessary to adhere to the following work algorithm:

1. First of all, you need to make markings on the side and screen. The markings must correspond to the fixation points.
2. At the next stage, you need to place the shield against the bathtub at a certain angle of 30–40° and place its top between the side and the mount.
3. Next, the previously marked places on the side and the shield are drilled for screws.
4. At the end, the holes that must match are fixed with self-tapping screws.

Screens for acrylic bathtubs have good resistance to moisture and also have a long shelf life. Experts recommend that you carefully study the instructions before installing such a protective panel. The instructions describe everything necessary nuances installation

Video of installing a screen on an acrylic bathtub

The screen under the bathtub is not so necessary, but a very significant element of the design of this room. It performs two tasks: it decorates the plumbing equipment and allows you to get additional space. The latter is very important for small apartments.

The bath screen is a panel made of plastic, plexiglass, MDF or other durable materials. At the bottom of the product there are screw legs, the length of which can be changed by screwing in and out. The panel is held in place by a frame consisting of 4 aluminum strips located along the perimeter of the product: two horizontal and two vertical.

This frame is the main reinforcing element, thanks to which the screen is securely fixed in a vertical position. Installation is simple: the product assembled from components is tilted at a slight angle and wound up top part under the bath. Next, install it in the desired position and fix it by twisting the legs.

This is how any screen model, or sliding, is mounted. The former differ from the latter in the design of the vertical panel. For sliding ones, it can consist of 2 or more parts that move relative to each other using a system of grooves and rollers.

sliding bath screens

Design of decorative panels for a bath

The design of the screens can be very different. A wide range of colors allows you to choose the most suitable product for a specific room. Panels with 3D photo printing, which creates the effect of depth of space, look original and stylish. For premises decorated in laconic style, plain screens, glossy or matte, are suitable.

The designers did not ignore the legs of the products. Now they not only serve as a support, but also serve as a decorative element. More expensive models may have antique-style legs. Screens with supports made in the form of animal paws, geometric shapes, and flowers are original.

If handrails for people with limited mobility are installed on plumbing equipment, more durable panel models that can withstand significant weight loads are chosen. The market offers a wide range of accessories and components for the bathroom. Therefore, it will not be difficult to choose those that will highlight the style features of a particular room.

Types and features of sliding screens

Although the sliding screen is more complex design than a solid one, it is still very easy to assemble and install. Dismantling the product is also easy. The most simple models are equipped with a plastic or aluminum frame, the upper and lower strips of which have a profile in the shape of the letter W. Two or three plywood or plastic panels are installed in these grooves.

More expensive models are equipped with a system of rollers, which are a transition link between the frame and the ribs of the “doors”. Such screens are more convenient to use, since moving and sliding the panels in them is much easier.

In the middle price range there are models made of inexpensive plastic and thin anodized aluminum tubes. Each of these types of materials has its own advantages and disadvantages. Plastic panels are fragile, but have an undoubted advantage: moisture resistance. Anodized aluminum frames are more durable, but are susceptible to corrosion. Rust develops in areas of damage (scratches). It is very difficult to avoid their appearance, since the bathroom is a regularly used room.

The designs of screens for bathtubs are designed taking into account the dimensions of this plumbing equipment. Standard length frames - 150-180 cm. Height - 56-58 cm. If necessary, such frames can be easily shortened by sawing off part of the upper and lower planks using a metal file. But you won’t be able to increase the length of the frame.

Sliding plastic and acrylic screens can be different: in the form of folding curtains, sliding panels and opening doors. The latter are used for models made of more massive material: MDF.

Installation of a sliding screen with an aluminum frame

Plastic screen under the bathtub - fragile and insufficient reliable design. Therefore, the installation process involves different ways its strengthening. First of all you need to find right place to install the screen. It should be slightly turned (recessed) towards the bathtub. In this case, drops of water flowing from its side will not fall into the space behind the decorative panel. It (the panel) must be installed strictly vertically.

To strengthen the structure, several methods are used that can be combined with each other.

1. A metal profile frame is mounted, the side posts of which are attached to the walls of the bathroom.
2. Fix the left and right sides of the screen frame using moisture-resistant sealant ( optimal choice– sealant for the manufacture and repair of aquariums).
3. Metal corners are attached to the bathroom walls, on which the screen frame will rest. For fastening on the outside of the panel, self-tapping screws with decorative caps are used.

For execution installation work you will need tools that every owner has in their arsenal.

1. Screwdriver or drill.
2. Screwdrivers.
3. Roulette.
4. Level.
5. Pliers.
6. Metal construction square.

Installation stages

Step 1. Find the middle of the panel. To do this, either measure the length of the screen with a tape measure, or find the required parameter in the annotation for the product.

Step 2. Similarly, determine the midpoint on the top side of the bathroom.

Step 3. Make the appropriate marks with a simple pencil. These actions are necessary in order to avoid displacement of the panel relative to the side, since the system is quite mobile.

Step 4. Place the screen next to the bathtub and tilt it so that you can slide its upper part over the side. To do this, it is enough to tilt the product at an angle of 30°-40°.

Step 5. Find the optimal location of the screen and use a marker to make corresponding marks on the walls.

Step 6. If metal corners are chosen as a reinforcing element, fasten them along the marked lines. To do this, you will need a drill, a corresponding drill, and dowel-nails.

If you decide to build a frame, choose a metal profile of a larger cross-section: rack or ceiling. For example, PP50x50 mm or PP60x27 mm. A frame made of guides (PN28x27) will not be so reliable. For screens up to 150 cm in length, it is enough to mount a reinforcing frame around the perimeter. For longer panels it is necessary to install 1-2 intermediate posts.

The first stage in building a frame is taking measurements. In accordance with the data obtained, strips of metal profiles are cut. They are connected to each other using self-tapping screws, corners or special fasteners - crabs (needed if there are intermediate posts). There are no difficult moments in installing such a frame. Therefore, anyone can build a frame for a bathtub screen.

Step 7 Install the assembled screen close to the supporting frame or to the metal corners.

Step 8 Unscrew the metal pins in the legs of the screen so that it is motionless.

Step 9 Attach the screen frame to the frame or metal corners decorative fasteners.

Trying on the screen and fixing it

Step 10 Fill the gaps between the walls, the screen frame and the side of the bathtub with silicone sealant.

Design features and installation of screens for acrylic bathtubs

Most models of acrylic bathtubs are shaped, so straight screens are not suitable for them. Manufacturers of this plumbing equipment are developing special designs that make it possible to hide the installation elements of acrylic bathtubs. Typically, such screens are included with models. But they can also be purchased separately from plumbing equipment.

Screens for acrylic bathtubs can be monolithic or sliding. The installation process is similar. Feature of such shaped screens - an L-shaped protrusion at the top of the product. This recess is needed so that the panel fits flush against the side of the bathroom. But despite the fastening system, such screens are relatively movable, since they are made of plastic with an acrylic coating. In order to avoid pushing towards the space under the bathtub, various techniques are used.

Installation acrylic screens It’s not complicated, but installation instructions are still needed. All types of these panels are fixed using a system of supports, which can be spring or plastic. The fastening elements are located on the back side of the screen.

Plastic decorative overlays attached at the stage of installation of the frame for an acrylic bathtub.

The springs are inserted into special protrusions of the lower frame on which the bathtub is installed. This support consists of several metal profiles rectangular section and has its own “legs”. As a rule, standard screens are equipped with three springs, one of which is located in the middle of the product, and the other two on the sides.

Manufacturing technology of a sliding screen for a rectangular bathtub

Step 1. Cooking workplace. If you plan to insulate and soundproof the bottom of the bathtub, then it is advisable to carry out this work before installing the screen. For example, before installing the bathtub on the legs, stick an insulating material (available at a car dealership) to the bottom of the container, which will reduce the noise level when pouring water.

Advice! When installing a bathtub, use not only the legs that come with the kit, but also additional supports, for example, made of brick. This guarantees better stability and extends the service life of the product, and also guarantees the tightness of the seam between the side and the wall.

Step 2. We prepare everything you need. To make a screen, you can use plastic panels of any shade that matches the decor of the room.

Plastic strips

Step 3. We work with panels. It is necessary to draw the configuration of the future screen on a piece of paper and indicate the dimensions. The screen may have additional recesses for laying pipes or other communications. It is necessary to carefully cut the panels using a jigsaw according to the plan, and then use sandpaper to remove burrs from the ends.

Using a miter box, you need to cut the U-shaped profile at an angle of 45 degrees, then glue the edging on the panel using silicone sealant.

To avoid drilling additional holes, use self-adhesive handles for sliding doors. Degrease the panel surfaces, remove the protective film from the handles and press them to the plastic surface.

For mortise handle You will have to drill a hole using a rosette bit. The diameter of the hole should match the diameter of the handle. To install the handle, you need to apply a little sealant to the edge and simply insert it into the finished hole.

Mortise handle

Step 4. We fix the upper guide with liquid nails. It is important to thoroughly degrease the lower part of the bathtub rim to ensure high-quality fixation.

Step 5. We fix the lower guide from the F-shaped profile. It is necessary to drill several holes in the profile shelf to fix it to the floor.

To make markings for drilling on the floor, we apply the profile and use a marker to mark the drilling points through the profile. First we use a drill for tiles, then for concrete.

We drill holes in the floor and blow dust out of them. Insert plastic dowels into the holes. We press the profile to the floor and tighten the screws. Can be applied thin layer sealant between the profile and the tile for a more aesthetic appearance of the installed structure.

Step 6. We insert the doors into the grooves of the lower and upper profiles. This completes the work.

In order to hide all communications, pipes and drains that are located under the bathroom, a special screen is installed. It mainly carries an aesthetic load so that the appearance of the lower part of the bathtub does not spoil the design of the bathroom. Some modern baths already supplied with screens that fit perfectly appearance and functionality, but not all. In order not to spend money on buying a ready-made and not very cheap screen, you can think about how to make a screen for a bathtub with your own hands. This not only allows you to significantly save money, but also install a screen that will fully suit the tastes and preferences of the owners; in addition, you can equip the screen with several useful functions.

What to make a bath screen from?

There are a huge number of building materials that can be used in a wet bathroom environment. So we can distinguish the following options, based mainly on the material that will form the base of the screen:

1. Laying a brick screen;
2. Sheathing moisture-resistant plasterboard followed by finishing with any suitable material(tiles, plaster, wallpaper, etc.)
3. Sheathing with moisture-resistant MDF, OSB with subsequent finishing;
4. Plastic sheathing.
5. Purchasing a ready-made screen or a set of sliding doors.

In addition to the store-bought solution, only plastic sheathing actually allows you to form a screen without the need for further finishing. This material is quite acceptable and practical, not affected by moisture and biologically neutral. Easy to clean and durable enough even if one or more strips are damaged plastic sheathing it is easy to replace. And yet for durable design or if plastic simply does not fit into the interior of the bathtub, you should choose one of the remaining three options.

In any case, the screen for the bathtub, no matter what it is assembled from, must meet several requirements:

• To access the main sewerage units and laid communications, there must be a technological opening that can be closed with a door or plug;
• It is advisable to seal the space near the floor to separate the floor under the bathtub from the rest of the bathroom;
• The screen is not load-bearing structure and the bath should not rest on it.

For convenience, a small recess is formed in the screen, most often with a slope so that it does not interfere with the legs. Some craftsmen, if there is free space under the bathtub or on the side of it, install an additional cabinet or drawer for household chemicals or detergents.

Laying a brick screen

In this version everything is simple. Along the border of the bathtub or from wall to wall near which the bathtub stands, a brick wall half a brick thick is erected. Mandatory, as during construction regular wall, the brick is altered, that is, every next row shifts by half a brick. A window is formed in a place convenient for access to the bathtub drain. In order to cover it, it is enough to buy or make a door and attach it to the awnings.

Although the brick wall is quite strong, you still shouldn’t rest the bathtub on it, so between the last row of bricks and the edge of the bathtub there should be a gap of about 1-2 cm, which can be blown polyurethane foam. After this, you can cover the brickwork with ceramic tiles or any other suitable material that will match the design of the room.

If you liked this option, but you don’t know how to lay brick, read about the basics of working with it.

Sheathing with plasterboard

The most flexible method in terms of forming the shape of the screen. Everything depends only on the desire of the owner. Installing a screen under a bathtub begins with forming a frame. For this you can use either a metal profile or wooden beam 40x40 mm. The tree must also be protected from moisture, otherwise rot and fungus will inevitably appear.

When installing the frame, it is taken into account that the facing material will also be sheathed on top of the drywall. So along the wall to which the side of the bathtub adjoins, a line for installing the edge of the profile is marked so that it is recessed from the edge of the bathtub by the thickness of the subsequent cladding. For example, if you plan to cover the screen with tiles, then an indentation of 12.6 mm + 5 mm + 4-6 mm (tile thickness) = 21.6-23.6 mm is made. The line must be continued along the floor along the entire length over which the screen will extend. In this case, a plumb line is used to adjust relative to the edge of the bath.

A UD profile is fixed along the perimeter of the resulting line. The profile that is attached to the floor should additionally be glued with sealant to prevent water from getting under and from under the bathtub. Next, the CD profile is installed vertically and secured to the supporting profile. The distance between the profiles is maintained at 600 mm, and racks are additionally installed in the place where the technological hole or recess for installation will be located drawer or a locker.

A ledge for feet can be formed in the center of the bathtub. To do this, the profile on the floor is not installed in a straight line, but in the shape of the letter U with a recess for the bathtub of about 10-15 cm. The racks in the niche will be installed at an angle.

Example of a tiled plasterboard screen with a lip

Moisture-resistant green plasterboard is used for cladding. It is cut to the appropriate length, equal to the height of the screen minus 2 cm. Fastening is done with hardened black screws every 15 cm around the perimeter of the sheet and in the center along the profile. It is important to choose correct length self-tapping screws so as not to accidentally screw the top screws into the acrylic bathtub. The sheets are attached with 1 cm indentations from the floor and the edge of the bathtub. This is necessary to prevent swelling of the drywall. After all, even though it is moisture resistant, it will still begin to deteriorate from direct contact with water.

When the sheathing is completed, the drywall is primed and sheathed with any suitable material, such as ceramic tiles, decorative plaster, moisture-resistant wet wallpaper, film materials, etc.

Video: example of installing a permanent screen under a plasterboard bathtub

Sheathing: MDF, OSB

The entire process is virtually identical to drywall sheathing. The only difference is that additional ventilation slots should be made in the screen on the opposite side of the technological hole. To do this, it is enough to make a slot only 2-3 cm wide and 5-10 cm long, which can be covered with a neat plastic grill. MDF sheets must be primed on both sides before being fixed to the frame.

Screen made of plastic lining

The simplest option would be to line the bathtub with plastic lining. This option immediately produces a beautiful finished surface and does not require additional processing or plating. If necessary, the screen can be easily disassembled to gain full access to the space under the bath.

In addition to the lining itself, you will also need a starting profile, which is strengthened along the perimeter of the future screen. From the top, under the edge of the bathtub, a beam or metal profile is first secured to the walls, and then a plastic starting profile. For the reliability and strength of the entire structure, it is also advisable to secure the profiles in the middle of the screen. This is especially important when using cheap options plastic lining, which can deform and lose its shape even from small mechanical loads. The lower profile, as in the previously described options, should preferably be glued to the floor using sealant.

Strips of plastic are cut using conventional construction knife and insert the edges into the starting profile. This way the entire surface of the screen is covered. At the site where the technological hole is formed, a rectangle is cut and a special plastic door is inserted, which are sold in the same places as the lining itself.

Since there is an unimaginable variety of plastic lining on sale, color design, pattern and even texture, then choosing a suitable option will not be difficult.

Sliding version of the plastic screen for the bathroom

As for the sliding screen for the bathroom, its creation requires either imagination or a ready-made installation kit from any hardware store. If you don’t have the second one, we recommend looking for ways to implement it from folk craftsmen. One option is in the video below.

Evgeniy Sedov

When your hands grow from the right place, life is more fun :)

Content

When buying an apartment or house, homeowners want not only to install plumbing, but also to make the bathroom attractive. They often put original tiles on the floor or walls, and buy plumbing fixtures of interesting shapes. You can make a bathtub screen with your own hands or buy a ready-made one for an acrylic or ceramic model, sliding or static, different sizes and shapes, patterned or plain.

What is a bath screen

When a person enters the bathroom, he immediately pays attention to the places under the bathtub and sink. To hide the bottom, protruding pipes and other elements, people install screens. The designs consist of frames attached to the bathtub, and panels with some kind of image or plain ones. This element can be smooth, textured, made of different materials, homemade or purchased.

Installing a screen under the bath

Screens differ in their shape, material, and functionality. However, the installation will consist of approximately the same steps:

1. Measure the niche under the bathtub.
2. Mark the places where the frame will be attached to the bathtub.
3. Attach the frame in accordance with the instructions, check gusset. For sliding options, a W-shaped profile is attached.
4. Adjust the legs. For reliability and tighter fixation, you can apply sealant underneath them.
5. Fill the space between the frame and the side of the bathtub with polyurethane foam.
6. Install the panels into the fixed frame.
7. The joints of the panels must be treated with sealant.

If you buy an acrylic bathtub, you can get a screen that is suitable in shape and size. It is made of plastic and comes from production together with the frame. If it is not included in the kit, you can buy a ready-made structure separately or make it yourself. Advantages of the deaf, solid option:

• aesthetics;
• strength;
• durability.

There is only one drawback: if a breakdown occurs in the plumbing, it will be inconvenient to repair. Screens with doors and sliding models benefit from this. Advantages of designs with hinged doors:

• easy to open and close;
• quick access to communications;
• You can install storage shelves under the bathroom.

Flaws:

• not suitable if small bathroom;
• short-lived, doors quickly fail;
• aesthetically not very attractive because there are a lot of cracks.

Advantages sliding models:

• convenient to use panel doors;
• take up little space when opened;
• easy and quick access to communications;
• You can store different items.

Flaws:

• guides quickly become unusable;
• metal guides are expensive;
• plastic guides break quickly.

IN different regions, for example, in St. Petersburg, Sochi or Krasnodar, the cost of bath screens is different. In Moscow, approximate prices are as follows:

1. Santa MDF 1.7 (sliding) – 3200 rubles.
2. Bellezza L1800 (sliding) – 3547 rubles.
3. Vod-ok Olympus 180 (swing) – 3240 rubles.
4. Soft Alavann 150 (folding) – 6960 rubles.
5. End Estet Laura 700 (deaf) – 4600 rubles.

How to choose a bath screen

To choose a bath screen, you need to decide for yourself what is important: aesthetics, ease of access to communications, the ability to use space for storage, or price. Based on the criteria, you can choose the appropriate model. Now there are a lot of options both in terms of decor and material. You can choose a ready-made size or order according to your own individual dimensions.

Sliding screen for bathtub

To save space under the bathroom and be able to hide something there, you can buy a screen with sliding doors. An excellent modern stylish solution would be the following example:

• name: Monaco coupe;
• price: 3510 rubles;
• characteristics: width – 167 cm; depth – 5 cm; height – 53.5 cm; body material – laminated MDF board;
• pros: 3 sliding doors; comfortable, overhead handles; the door mechanism is on skids;
• cons: the style does not suit any interior.

Some people adhere to a style called minimalism in the interior. To match it, you need a screen without any additional decorations; the following simple option will do:

• name: Vod-ok;
• price: 3020 rubles;
• characteristics: width – 147 cm; depth – 13 cm; height – 54 cm; body material – moisture-resistant laminated chipboard; facade material – moisture-resistant MDF;
• pros: you can store some things; free access to communications;
• cons: small hands.

Compartment screens are very popular due to their compactness; the panels are moved to the side. Another representative with sliding doors is the design from Alavann:

• name: Alavann Coupe Still;
• price: 3650 rubles;
• characteristics: white color, width – 160 cm; aluminum frame;
• pros: strong, durable frame; protective moisture-resistant façade material;
• cons: the doors are noticeable, which will look ugly in some interiors.

Bathroom screen with shelves

When installing a screen, many people try to use the space under the bathroom to store various household items. For greater convenience, there are models with already made shelves and niches:

• name: Vannbock Light;
• price: 800 rubles;
• characteristics: color – white; width: 150 or 170 cm; material – polystyrene;
• pros: stylish design; affordable price; ease of use;
• cons: fragility of the material.

There are screen options that are massive and heavy, which makes them difficult to install. However, there are also very light and compact models:

• name: Ultralight;
• price: 597 rubles;
• characteristics: width – 167 cm; White color; material – PVC profile and cellular polypropylene;
• pros: affordable price; convenience; ease of installation; shelves of different heights;
• cons: impracticality, fragility.

White color is universal and suits any interior, and in the bathroom it is often the main color. However, people often want to diversify the room and add color to it. To make your bathroom bright and creative, you can buy a screen model with a pattern or the ability to transfer it onto panels:

• name: Premium A;
• price: 1177 rubles;
• characteristics: width – 168 cm; aluminum frame with polymer coating; panels – PVC with a decal pattern;
• pros: the frame is coated with an anti-corrosion substance; waterproof PVC panel, decal;
• Cons: hinged doors, not suitable for a small bathroom.

Screen for acrylic bathtub

A screen for it is often supplied with an acrylic bathtub. If you didn’t have it when you purchased it, you can purchase it separately. The design appears neat and attractive white:

• name: Fleece Runo;
• price: 3440 rubles;
• characteristics: width – 150 cm; depth – 13.7 cm; height: 50.5 cm, color – white; body material – moisture-resistant laminated chipboard; facade material – moisture-resistant MDF;
• pros: facade without a pattern, suitable for any interior; three hinged doors;
• cons: small hands; The doors are hinged and cannot be installed in a small room.

If the bathroom is large, you can install a whole cabinet in it for all kinds of detergents and sponges, then there is no need to use the space under the bathtub. In this case, you can buy a blank screen, for example, next option:

• name: Canyon II;
• price: 5520 rubles;
• characteristics: color – white, width – 150 and 160 cm; frontal; material – ABS plastic;
• pros: hides communications; room aesthetics;
• cons: access to communications is difficult.

The advantage of a blank solid screen is its visual appeal. The winning option for an acrylic bathtub is as follows:

• name: Aquaria;
• price: 5520 rubles;
• characteristics: width: 140, 150, 160, 170 cm; White color; material – ABS plastic; frontal;
• pros: hides communications under the bathroom; adds aesthetics;
• cons: it is deaf, there is no storage space.

In order to qualitatively equip your bathroom, you should not forget about the aesthetic side of the finish. If you think that after renovation it is enough to install furniture and plumbing and that’s all, then you are deeply mistaken. In some cases, communications running under the bathroom remain visible, which, of course, do not add aesthetics to the room. Therefore, the free space under the bathtub should be covered with something, and a decorative screen is ideal for these purposes. Often after repairs there is practically no money left, but to buy ready-made panels is not possible or there are other reasons, so you can make a bath screen with your own hands.

Aesthetics above all

In Soviet times, the free space under the bathroom, as a rule, was not closed, and about aesthetic side no one cared about the issue. But time is running, technologies are developing and make it possible to make a screen for a bathtub of almost any shape and style. Now Special attention pays attention to small interior details, because they can radically affect the overall picture of the renovation.

Screens for the bathtub can be purchased together with the bathtub or separately from it, but it is not always possible to choose right size and the shape of the structure. Therefore, you can create a homemade bath screen that will not differ from the factory one either in quality or appearance.

And in this article we will tell you how to make a screen for a bathtub with my own hands, what is required for this, what material to choose and other useful things.

Selecting material for the screen

At the very beginning, before making a bathroom screen with your own hands, you need to decide what material will be used.

The most popular today are:

• plastic;
• acrylic;
• brickwork;
• tile.

Product requirements

Just like a factory product, a homemade bath screen must meet certain requirements:

• After installing the screen, there should be free access to communications. That is, the design must contain a door, window or canvas made in the form of sliding sections;
• Material or its protective covering must correspond to the special microclimate of the bathroom. In the bathroom there is almost always high humidity, and sudden temperature changes occur. Therefore, ordinary finishing materials for the bathroom cannot be used, because under the influence of these factors they will quickly collapse;
• After installing the screen, the bathtub should not rest on its plane.

Tip: The free space under the bathroom is often used as a niche for storing small items, household chemicals, detergents, etc. Also with internal and outside You can install additional shelves. This solution is especially relevant for small-sized baths.

Creating a brick screen

Brick is enough universal material. In general, making a screen for a bathtub from brick is a classic option.

Creating a brick screen under the bathroom with your own hands is quite simple, you just need to know and take into account the peculiarities of the work process:

• The laying is carried out in a quarter of a brick;
• The screen is placed from one wall to another along the border of the bath;
• To create a correct and strong screen structure, each row of brick is shifted by half of the previous one (“stitched”), that is, a “chessboard order” is obtained;
• The space between the floor and the bathtub is not completely filled; space must be left for a door or viewing window;
• The last row of bricks is not placed close to the bathtub. A gap of 1-2 cm is left between the brick and the bathtub; it can be blown out with foam or a decorative overlay can be installed.

When making a screen for a brick bathtub, you need to remember that this is not a completely finished structure. After completely dry Mortar for masonry, decorative finishing is installed on top of the brick; this can be tiles, laminate or mosaic.

Important! It is highly undesirable to use wallpaper, because high humidity and the temperature of the lines of service will be very short.

Making a screen from MDF

Screens made from MDF panels are quite popular, because with careful use and high-quality surface treatment they can last a long time, sometimes 10 years or more.

Before making a screen for a bathtub from MDF, a special frame is installed from a metal profile or wooden beams.

Important! If wood is used for the frame, it should be pre-treated with a special antiseptic.

When the frame is completely ready, you can begin MDF sheathing panels. To properly protect the material from moisture penetration, it is treated on all sides with a primer, and the points of contact with the floor are treated with silicone sealant.

The screen must contain technical and ventilation holes approximately 2x5 cm in size. To make such holes look harmonious, you can install decorative grilles or panels for ventilation ducts in them.

Manufacturing of plastic screens

Manufacturing screens for bathtubs from plastic panels is much simpler than MDF structures. Since there is no surface pre-treatment process and decorative cladding, installation time is reduced several times.

For your information: The undoubted advantages of plastic screens include easy installation and dismantling the canvas.

Before installing the structure, you need to build a frame; for this, you should use a profile for the screen under the bathtub. Its installation is mandatory because it will fix the panel under the bathtub in the desired position. Thanks to this design it is possible to create sliding structure. This solution will allow you to rationally use the space under the bathroom.

The frame is made of several parts. The starting profile is installed first, which serves as a support for subsequent structures. The reliability of the installation will determine whether the structure will warp or not. Subsequent elements are mounted on special slides, along which the canvases will move.

Just like in MDF screens, plastic structures must have ventilation and technological holes.

We must remember! When making a screen for a bathtub yourself, you need to take care of sealing the area adjacent to the floor. This procedure can be performed with sealant. Such actions will prevent water from entering the space under the bathtub.

Decorative tile panel

The process of creating a screen from tiles is very similar to the previous ones, only here the pre-prepared frame is sheathed with moisture-resistant plasterboard, after which ceramic tiles are laid.

Unlike previous designs, the tiled screen for the bathroom is made monolithic with your own hands. Therefore, before starting the installation, you need to think through the entire design of the screen where the communication will take place, ventilation and technical openings will be located. Since access to the pipes will be limited, at the very beginning you will have to take care of creating a window or door for servicing the communications.

Before making a bathroom screen from ceramic tiles, you need to decide on the material for the base. The best would be brickwork or plasterboard construction. The frame for plasterboard can be made of wooden blocks or a metal profile.

Ceramic tiles are laid using waterproof tile adhesive for kitchens and bathrooms, and the seams are sealed with a special grout.

Important! The grout must contain substances that prevent the formation of fungus and mold.

A few words in conclusion

So that the screen for the bathroom with your own hands is of high quality and creates cozy atmosphere indoors, use our tips on how to make a screen for the bathroom, and you can also study video tutorials and photo reports from masters.