Mounted in the country wooden fence with your own hands, it looks great, especially if the construction technology is followed and everything is taken into account important nuances. The tree can be called classic material, which has passed centuries and has not lost its popularity. Despite the wide variety of building materials for fences, wood does not lose its leadership. However, installing a beautiful and cheap wooden fence with your own hands requires certain skills and compliance with the rules below.

Beautiful fencing - decoration of the site

To build a fence, you first need to purchase necessary materials. The most commonly used lumber coniferous species(pine, cedar). The fact is that these types of wood have increased resistance to rot and impressive moisture resistance. Building a fence with your own hands from these lumber is completely worth it.

A picket fence is considered an environmentally friendly and safe material; moreover, such a fence will fit perfectly into the natural landscape and even add originality to it.

Features of lumber fences

Beautiful wooden fences are quite easy to install. But to build them, you need to have certain skills and knowledge. As a rule, erecting a fence at a dacha with your own hands does not imply...

The picket fences are mounted on pre-dug poles, which makes installation much easier.

Combinations of picket fence and wicker fencing

Advantages of this solution

Because of existing advantages wooden fences, the demand for them still remains high. or for home - this the best option. Fence from wooden picket fence has the following advantages:

1. Naturalness and originality. Wood has a unique texture and structure, which makes such barriers look simply magnificent.
2. Aesthetics. In addition to the fact that a beautiful wooden fence fulfills its direct functions, this solution will decorate the area.
3. A fence made of lumber is quite cheap, which cannot be said about metal or brick barriers. Lumber is relatively inexpensive, and proper care it will last a long time.
4. Simple construction. As a rule, subsequent installation does not require any specific knowledge and skills. It is enough just to follow the exact work plan and follow important rules.
5. Diversity existing options. There are many fencing designs that you can build yourself. For example, a herringbone fence or the construction of a lattice fence, etc. There are hundreds of known variations of hedges.

In some types, the frame is sheathed with lumber in a horizontal position (blind fence), in others - in a vertical position. Also, the pattern is based on a herringbone pattern or the picket fences are arranged in the form of blinds. In general, the design of an existing board fence is quite varied.

Picket fence with forging elements

Classic

Fence installation diagram

Classic picket fence

Rustic style will never lose popularity. will do wooden gate with appropriate design, which can be interesting drawing or carving. Also, a decorative classic picket fence can be used for a flower garden. By the way, flowerbeds installed with your own hands will turn out to be the most attractive with this design.

Making this model of fence will not be difficult at all, because it is difficult to come up with a simpler design. The wood used for subsequent construction is pine or cedar. This construction option is relatively cheap and at the same time very attractive.

If used wooden joists as a support, in this case the dug-in part of the lumber must be treated to prevent the process of rotting in the ground. This part can be painted or tarred.

Using a drill or shovel, holes are dug in the ground at an equidistant distance. You can do it in two ways:

1. Sprinkle the vertically installed supports with soil and compact them thoroughly.
2. Pour cement and wait for it completely dry.

Urban option

Picket fence installation diagram

Fence blinds

This unusual solution Requires a little more effort to assemble, but it's worth it as it really looks great. If desired, you can further decorate it decorative elements. The assembly principle of this design is somewhat similar to the above, but there are still several differences.

An excellent option for a garden fence is shown in the photo below.

Pillars

Blinds installation diagram

Set of spans

The methods of fastening the planks solely depend on the material of the supporting pillars. The boards are installed in the prepared grooves. It is customary to install planks from bottom to top. The topmost board is installed in a horizontal position, and all the rest are installed at an angle of 45° or any other.

Construction beautiful fencing- the logical conclusion of home ownership registration, protection from the indiscreet glances of others and decoration of the site. The decision to make a wooden fence with your own hands, despite its cheapness, requires preparation and accurate calculations.

Wooden fence: advantages and disadvantages

Wood is one of the most attractive materials for making a fence, however, it is capricious in operation, and the durability of a fence made of this material largely depends on the choice of type of wood.

To make the simplest picket fence, coniferous wood is usually chosen, which is cheap and less susceptible to rotting. Of course, no one will forbid making a fence from oak or beech, but such a fence will cost a pretty penny.

Advantages of wood:

1. Environmental friendliness;
2. Availability of material;
3. Low cost;
4. Ease of processing and installation;
5. Highly decorative.

Disadvantages of the material:

1. Fragility (of some breeds);
2. Tendency to cracking;
3. Rotting in conditions of high humidity;
4. Fire hazard;
5. Pest infestation.

Since some of the shortcomings can be eliminated various impregnations, wood is most often chosen for fencing.

Types of wooden fences

For thousands of years, wood was the only building material; our ancestors accumulated vast experience in using wood in for different purposes, including for fences.

The figure shows the most common designs of picket fences, but this is the most simple design made of boards - a picket, in addition to it made of wood:

1. wattle fence;
2. plank;
3. pole;
4. palisade;
5. panel;
6. ranch.

With a little imagination, any of these fences can be made business card plot, and, explaining the way to guests, the neighbors will say: this is where the fence is beautiful (unusual, stunning, unique)!

Examples of options in the photo

A low fence opens up the children's playground on the property to the neighbors' view A fence made of boards arranged in a checkerboard pattern blocks the view of the site A weave of boards placed at an angle can serve as a support climbing plants Walking past such a fence, you can’t help but smile The picket pattern is made in such a way that short dies create a high fence A picket fence, supplemented with end cuts of wood, becomes a solid fence Mirror film, pasted on pickets, turns an ordinary fence into an art object There is no place for pests in a garden with such fences

Preparing for construction

Even something as seemingly simple as fencing a site with your own hands requires:

1. preliminary familiarization with regulatory documentation;
2. project development;
3. determining the need for materials;
4. budgeting.

Current standards

Standards for the construction of fences summer cottages are prescribed in SP 53.13330.2011 “SNiP” 30–02–97* “Planning and development of territories of gardening (dacha) citizen associations. Buildings and constructions":

• Fences between areas should have a height of no more than 1.5 m, mesh or lattice;
• By decision of the general meeting of members of the partnership, the fencing of the site on the side of the street or driveway may be blank, but not higher than 2.2 meters;
• The distance between the fence supports is 2–3 meters;
• Each rack requires a point foundation with a depth of 0.8 to 0.9 meters;
• Recommended racks - made of metal rectangular pipes cross section 4x6 centimeters.

In addition to the general requirements for the state, local authorities may introduce their own standards, so before starting design it is advisable to consult the regional service in charge of the general plan.

Design

Having decided on the requirements, you can begin designing. The basis for the project will be a cadastral plan of the site indicating the boundaries. According to the plan, calculate the total length of the perimeter and the size of each side separately. These dimensions will allow you to calculate the number of fence sections and the size of additional sections. A scale diagram of the site indicating all dimensions is drawn on a separate sheet of paper. Don't forget about the entry gate and the entrance gate.

When constructing a wooden fence, experts recommend making the distance between the supports no more than 2.5 meters, since as the span increases, the deflection of the horizontal crossbars increases, which can cause deformation of the structure.

On the drawing of an ordinary section of the fence we put all the dimensions, including the underground part of the pillar

A drawing is also being developed for an ordinary section with a height of one and a half meters.

Having decided on the type of fence, draw it separately standard section fence to scale, including the foundation for the support, with all dimensions.

The bottom line of the fence should be raised 10–15 cm above ground level, the posts should exceed the fence by 10 cm or more.

For corner supports, gate posts and wickets we accept pipes with a cross-section of 60x60 mm, intermediate pipes of 40x60 mm. If the soil is in an area of ​​neutral acidity, and the level groundwater below one and a half meters, the racks can be installed using partial concreting or backfilling. In this case, the racks are buried into the soil to a depth of 0.8–1.2 meters, but not less than a quarter of their total height.

Material selection

From the huge number of types of wood for fences, it is best to choose coniferous species:

• they grow everywhere;
• due to the structure being saturated with resin, the wood is resistant to humidity and solar radiation;
• have low cost.

Of course, you can make a fence from ash or oak, it will more durable than a fence made of spruce or pine, but such a fence will cost a pretty penny. The best choice- larch, the most resistant to moisture of all coniferous species, has an adequate price.

If desired, in addition to edged boards, the fence can be made from cheaper materials - slab or unedged boards. Also available materials may be useful - sawmill waste, dead wood, pallets (pallets), old door leaves or window frames.

Use old pallets with caution: they are often made from hardwood wood, for example, birch, which does not tolerate moisture and rots in the air.

Calculation of material requirements

The required amount of materials is calculated based on the geometric dimensions of the site. Suppose the plot has a square shape measuring 30x30 meters, with three sides fenced with a picket fence 1.5 meters high, on the driveway side there is a blind fence 2 meters high, with a gate 2.5 meters wide and a wicket 1 meter wide. The depth of soil freezing is 1.4 meters, the aquifer is at a depth of 3.3 meters.

Based on the size of the site, we determine the need for materials

Racks made of pipe with a cross section of 60x60 mm and a height of 3.0 m

Length of fence along the driveway

L1= 30–(2.5+1)=26.5 m

Number of racks

L1: 2.5 + 1+2 =26.5: 2.5 +3= 13.6

Since we have an additional section, we take the number of racks equal to 14.

To seal the ends of the racks you will need a strip 100 x 4 mm, 100 mm long, with a total length of 9.8 m.

The total length of the picket fence with a height of 1.5 m:

The number of racks made of pipe with a cross section of 40x60 mm and a height of 2.5 m will be:

L2: 2.5 -1 = 90:2.5 - 1 = 36 –1= 35 pcs.

Horizontal logs are made from boards with a section of 40x100 mm long:

L3= 2.5 – 0.07 = 2.43 m

The number of logs is equal to the number of ordinary fencing sections multiplied by two:

(12 x 3 + 10) x 2= 92

For an additional section 1.5 m wide, two 40x100 boards 1.43 m long are needed.

We fasten the logs to metal corners from profile 30x3, each 60 mm long, total 94 pcs., equal to the number of lags.

For a fence 1.5 m high, we take planks 10 cm wide, 22 mm thick, 1.35 m high with a gap of 4 cm between the planks, 17 pickets will be required per row section, total quantity:

17 x 46 +10 = 792 pcs.

For a blind fence 2 m high, planks 10 cm wide, 1.85 m high, and 25 mm thick are needed. Their quantity will be 25 pieces. per section, total:

25 x 11 = 275 pcs.

In addition, you will need self-tapping screws for attaching the corners to the posts and crossbars to the corners, and nails for attaching the picket to the crossbars.

For foundations based on the depth of pits 1 m with a diameter of 40 mm, 6 - 6.5 m3 of crushed stone will be required.

Wood volume:

1. Boards 40x100 mm - 92 x 2.5 x 0.1 x 0.04 +2 x 1.5 x0.1 x 0.04 = 0.94 m3
2. Boards 100x22 mm - 1.5 x 0.1 x 0.022 x 792 = 2.38 m3
3. Boards 100x25 mm - 2 x 0.1 x 0.025 x 275 = 1.38 m3

Metal volume:

1. Racks 60x60 - 3.0 x 14 = 42 m.p.
2. Racks 40 x 60 – 2.5 x 35 = 87.5 m.p.
3. Angle 30 x 3, length 60 mm - 94 x 0.06 = 5.64 m.p.
4. Steel strip 100 x 4 – 9.8 m.p.

Wood will require impregnation and paint or a complex composition that protects the wood from pests, adverse weather conditions and fire. Metal requires a layer of soil, waterproofing for the underground part of the racks and a protective coating.

Since fence boards do not perform any work, the selection of thickness is determined by flexibility. It is known from experience that for horizontal boards - a log with a cross-section of 100 x 40 mm is sufficient, for a picket with a height of 1.5 m with two attachment points a board will do 22 mm thick, for a height of 2 m - a board 25 mm thick.

Required Tools

To complete the foundations you will need a gardener earth drill or you will have to dig holes 1–1.2 meters deep and 40 cm in diameter manually.

The toolkit includes:

• Jigsaw;
• Circular saw with discs for working on metal;
• Welding machine;
• Electric planer;
• Electric drill with drills for metal and wood;
• Wood hacksaw;
• Hammer;
• Pliers;
• Screwdrivers;
• Universal wrench;
• Construction level, horizontal and vertical;
• Roulette;
• Cord or twine;
• Brushes.

Installation of fencing, step-by-step instructions for DIY construction

Fencing the site is carried out in several stages:

1. Preparation of racks;
2. Installation of picket fence sections;
3. Marking the actual fence;
4. Excavation;
5. Installation of racks;
6. Installation of fencing.

There is another installation method, when all elements are fixed in place sequentially, without preparation. This method has a right to exist, however, it will take more time, and it is inconvenient to mount corners for attaching lags to an installed rack.

1. Preparation of racks

For each rack, in accordance with the drawing, for ordinary racks long sides fasten on self-tapping screws, two corners each, for corner posts- on two adjacent sides. Plates - plugs - are welded to the ends of the racks. The welds are cleaned, the racks are covered with primer, then paint.2. Installation of picket fence sections

Pegs or reinforcement are driven into the place where the corner posts are installed.

A cord or twine is pulled along the perimeter of the area between the corner pegs. Using a tape measure, determine the installation locations of row racks.

4. Excavation work

Using a garden drill, we make a hole 1 - 1.2 m deep for corner posts and fence posts along the driveway, and a hole 0.8 - 1 m deep for the remaining posts. We pour sand in a layer of 0.1 - 0.2 m at the bottom of the hole and compact it well.

5. Installation of racks

We waterproof the underground part of the racks by wrapping them with bitumen-polymer material on mastic or covering them with a special waterproofing compound for metal. We install the racks, fixing them in the recesses using pieces of reinforcement or corners. We fill the crushed stone with a layer of 20 - 25 cm, check the verticality of the support, compact it, and moisten the layer with water. We repeat the operation until the pit is leveled with the ground surface.

6. Installation of fencing

We install prepared fence panels. If the posts are installed correctly, at the required distance, height and without distortion, the fencing sections are mounted without problems. The fence joists are installed on corners fixed to the posts and screwed with self-tapping screws.

7. Painting the fence

Painting and protecting the fence wood can be done different ways, which are the subject of the next section.

Materials for protecting and tinting wood

Until recently, stain, drying oil and PF-115 paint were offered for protecting and painting wood, but now the store shelves with such products are running wild. Wood coloring should have the following qualities:

• Resistance to low and high temperatures, precipitation, wind;
• Resistance to sunlight;
• Resistance to pests, rot and fungus;
• Durability;
• Fire safety.

The following compositions are offered for protection and tinting:

• Paints;
• Enamel;
• azure

• Belinka, Slovenia;
• Tikkurila, Finland;
• ALPINA, Germany;
• Teknos, Finland;
• AQUATEX, RF;
• Yaroslavl paints.

In order for the fence to serve for a long time, you will have to work hard: the processing takes place in several stages:

• Cleaning from dirt,
• Grinding;
• Dust removal;
• Primer with a complex composition that gives the wood fire resistance, resistance to rot and fungus;
• tinting.

There are many options for painting a picket fence; if you wish, you can add your own method to the existing ones.

The fence is an element of the garden landscape. In addition to their direct “responsibilities” - protecting the site from unauthorized access and indicating the boundaries of private households, fences play an important role in the aesthetic arrangement of the territory. There is a fence different types, configuration and texture, but the most popular in decorative meaning was and remains wooden version. In addition, you can make such a fence yourself, using all your imagination as a craftsman.

Making a wooden fence is quite simple compared to its metal counterpart. This option has many advantages with minimal disadvantages. For the construction of wooden fencing you can use various material– boards with different breeds trees: beech, pine, larch or oak. Coniferous wood is especially valued. Each master chooses the material at his own discretion, because the main thing is that the wooden fence is of good quality and lasts a long time.

How to make a fence correctly

Wood fences can be divided into 2 groups: hedges and palisades. Also, such fences vary in design (picket picket, wattle fence, bamboo fence, ranch, lattice and other fence design options).

The most popular and simple ones are picket fences, as well as those made by a continuous row of boards. Regardless of what kind of fence you plan to build, you definitely need to carry out preparatory work according to its structure:

• clear the area for the wooden fence (remove debris, pull out grass or weeds, uproot stumps and roots of old trees, if any);
• dismantle the old fence;
• draw up a design diagram of the future picket fence, where to mark the location of the gate, taking into account boundary boundaries and signs;
• select and buy all the necessary materials for building a fence (wood, nails or construction screws treated with an anti-corrosion agent, cement to stabilize the fence support, beams and logs, paint);
• prepare tools (hammer, hacksaw, shovel, crowbar, hole drill, tamper, cord and pegs for marking the area, wheelbarrow, mixing container cement mortar or concrete mixer).

Service life of a wooden fence

A wooden fence has a service life of about 8 years. However, if you properly care for it and repair it on time, then this period increases 3 times. A good wooden fence can last more than 30 years, although fences from historical wooden architecture, which are more than 50 years old.

The main factors for the durability of wooden fences are:

• quality of building material - wood (soft or hard wood, manufacturer);
• good quality and correct installation;
• operating conditions.

Manufacturers determine the quality of a material by its likely wear resistance. Also, the service life of the fence depends on how carefully it is handled.

The advantages of wooden fences are:

• environmentally friendly - absolutely clean natural material which does no harm environment, a sanded fence is pleasant to the touch, it does not absorb sunlight, which is important for plants growing close to each other;
• variability - compared to the factory version, a metal profile, which is usually installed in a vertical position, can be worked with wood various options– horizontally, vertically, diagonally, interlacing, and also use boards of various lengths, widths and thicknesses;
• ease of installation - when installing a wooden fence, no special skills, thorough concreting or a large number of people are required, since a wooden fence is not heavy and can be easily handled by one person;
• aesthetics – natural beauty wood is a leader in the selection of materials for the future fence; it looks great in any landscape design solution.

It is worth considering that wood is “afraid” of exposure to moisture, since over time it begins to rot, turn black, and become covered with mold spots. To delay these unpleasant moments, it is necessary to carefully care for the wooden fence and carry out antiseptic prophylaxis for it in a timely manner. You should also pay attention to the flammability of this building material and use special means to impregnate and protect it in order to avoid fire.

Wooden fence design

Modern, wooden fences have different design in any format that provides a visual impression. This type of fencing is a traditional option for Russian villages, holiday villages or country cottages.

The tree is beautifully decorated and covered different paints or varnish, it fits harmoniously into any landscape composition. The design of a wooden fence depends on the preferences, imagination of the owner, as well as the overall compositional background. Most original fences are obtained using the following types of fences:

• solid - made in the form of a palisade made of stakes or round logs, slabs, edged boards;
• option checkerboard layout or overlap - the boards are laid in a horizontal, vertical or diagonal position;
• “braiding” - boards are fixed between support pillars, either from the inside or the outside, by braiding them;
• – a combination of boards with round logs as support, a classic option;
• wicker fence - vines, tree branches, twigs are used;
• lattice fencing - slats are used;
• a fence in the style of a cowboy ranch - the exotic horizontal bars are attractive with brutality, it is recommended to combine them with a massive concrete or stone base.

Whatever fence design you choose, it is worth considering its role in the overall compositional picture and functionality.

Today, a person who decides to build a house on his own must be prepared for significant costs. Most of the money is often spent on the foundation and laying the walls, but in most cases you have to spend a lot on things that at first glance do not seem obvious. It's about about the fence.

A smart owner of a future home sets the goal of saving on such details. Moreover, this is a completely justified and feasible solution.

A key way to reduce the cost of a fence is to do it yourself. Do not underestimate the importance of this process, since a fence is not only a decorative structure that hides the territory from prying eyes, but also safety fence, designed to prevent suspicious persons from entering the site.

In other words, the design must be reliable, durable and aesthetically pleasing. Only under such conditions will it satisfy all the requirements placed on it. In our case, ease of installation should also be added to the list of conditions.

Materials for building a fence

There are several base materials, allowing you to build an inexpensive and functional structure:

• tree;
• Rabitz;
• corrugated sheeting;
• plastic.

The main limiter in construction technology and combination of materials is financial costs. First, you should select the material that will become the basis for the fence, then find a suitable economical construction technology, and then make basic calculations.

Wooden fence: pros and cons

Modern construction stores offer a large number of wood options suitable for construction reliable design. This material has some advantages over others, which makes it almost the most popular product.

Advantages of wooden structures:

Flaws:

Materials for installing a wooden fence

To build a standard wooden fence, you will need materials such as: picket fence, cross boards, support pillars, pegs, ropes, cement, sand, shovel, saw, fasteners, special remedy against wood rotting.

It is best if the entire set of tools is collected in one place within reach to facilitate access to components.

Construction of a wooden fence

Stage 1. We mark the site for the structure and determine the location of the gate. We use pegs and rope. The distance between the pillars is 2 meters. This is how the structure’s resistance to external influences is ensured.

Stage 2. Take a shovel and dig holes for the support pillars.

Stage 3. We immerse the pillars in the ground by about one-fourth of their length.

Stage 4. We install spacers to secure the pillars and fill the hole with cement mixed with sand.

Stage 5. We drive in the cross boards.

Stage 6. We fix the picket fence vertically on the transverse boards.

Stage 7. Paint the finished fence in the chosen color.

At this point, the construction of the wooden fence is considered completed. This is a relatively simple fence option that is usually installed as a temporary option.

A fence made of mesh is considered the most economical option, available today. Among the advantages of such fences it should be noted:

Clarifying the last point, it should be noted that installation will require tools that are easy to find in every home. In addition, modern stores offer wide range the most different colors and sizes, which allows you to move away from the banal appearance fence

Materials for building a fence:

For those who adhere more original solutions, exist vinyl coverings, however, they tend to lose color over time.

Construction of a chain-link fence

Step 1. Carry out the markings.

Step 2. We dig holes for the support pillars.

Step 3. Place the pipes in the holes.

Mesh fence

Step 4. Fill the holes with pre-prepared concrete mortar. In some cases, builders simply drive pipes into the ground using a sledgehammer. This is possible provided the soil is sufficiently soft.

Step 5. We begin to secure the mesh. We fasten the beginning of the roll at the first pipe, which acts as the beginning of the future fence.

Step 6. We stretch the mesh around the remaining supports, gradually securing it. It is important to ensure that the mesh does not sag, otherwise all work will be useless.

Stages of work during sectional construction of a fence

Step 1. Lay the foundation.

Step 2. We build a tension frame from metal corners.

Step 3. Fasten the corners between the supports.

Step 4. Attach the mesh inside the corners using welding.

Chain-link fences are very easy to erect without the help of specialists, which allows you to save a lot and try your hand at it.

Corrugated fencing

This type of fence can rightfully be called the most common. Most often it is used for fencing summer cottages and private houses. To build such a fence you will need welding machine and a little patience. In general, the installation technology is very simple, which can be attributed to the advantages of the design.

Modern construction markets offer corrugated sheets various colors and sizes, so buyers should not limit themselves in their fantasies.

Additional accessories should be purchased anti-corrosion paint, support structures, logs, shovels, screws, and also make cement mortar.

Installation of a corrugated fence

Step 1. We mark for the future fence. It is important that the distance between adjacent supports does not exceed two and a half meters. Pegs and twine are used as auxiliary elements.

Step 2. Making indentations in designated places. In the future, these holes will be inserted supporting elements. This task can be accomplished using a special drill or simply digging a hole with a shovel. The standard depth of the pit is one hundred and thirty centimeters.

Step 3. We install support pillars at the corners of the territory, and then along the entire perimeter.

Step 4. Strengthen the bases of the pillars with cement.

Step 5. Install the logs that are necessary for further attaching the corrugated sheeting.

Step 6. Attach the sheets to the joists using self-tapping screws.

Step 7. Paint the metal elements with enamel. In some cases, a primer is used.

Ultimately, the fence turns out to be quite pleasant in terms of aesthetic characteristics, as well as durable and reliable. It looks much more solid than a fence made of wood or chain-link mesh, and therefore can be regarded as a full-fledged fence.

Plastic fence

Plastic deservedly bears the title of one of the most available materials for building a fence. This is a real salvation for summer residents who do not want to build expensive structures on their plots.

The positive aspects of such fences are as follows:

• strength;
• durability;
• ease of installation;
• low cost;
• nice appearance.

Installation of a plastic fence

Stage 1. We mark the area where we plan to install the fence.

Stage 2. Mark the places where the wicket and gate will be.

Stage 3. In established places, we drive support pillars into the ground.

Stage 4. We fix piles made of durable metal in the corners.

Stage 5. We stretch the piles along the perimeter of the site.

Stage 6. Secure the pillars with spacers.

Stage 7. Attach the sections between the supports.

Thus, as a result of simple machinations, a beautiful and functional fence is obtained, which in its external qualities, although it cannot compete with structures made of decorative stone or forged elements, but completely satisfies the owners of the territory.

This article discussed the most simple ways construction of fences, the choice of which is determined only by your preferences. Now you can build cheap fence with your own hands.

Video – Construction of a wooden fence

Video - Construction of a mesh fence

Video - Installation of a fence made of corrugated sheets

Video - Installing a plastic fence