In the summer, when the hot sun enters the house through the window panes, many people have a desire to protect themselves from such effects. An excellent solution in this case would be a sunscreen film.

It is worth noting that this method will not only help protect from the sun, but also well closes the view for strangers who sometimes look into your windows. The use of film is especially appropriate if you live on lower floors.

Protective film properties

The sunscreen film has a lot of advantages, which can be seen during use. The modern market offers its customers many different options that can be used for home, office or other premises.

To create sun protection properties, layers must be made from the following materials:

• metal coating;
• use of aluminum;
• titanium layer.

All these components are capable of providing reflection of sunlight. The film absorbs heat, but the transparency properties of the glass remain the same.
This option is able to provide not only protection of the room and interior from ultraviolet radiation.

When using the film, a comfortable stay will be created for pets, the active growth of plants does not stop.

The reflection and absorption properties of this material are 90%. With the help of the film, the room will always have a normal temperature, and UV protection is guaranteed.

Modern manufacturers produce options in various shades. The differences between many films are in the degree of toning.

The main types are medium and high performance options. The selection of each of them depends on the degree of exposure to solar radiation.

Installation process

You can stick the sun protection film on the glass yourself.

1. First you need to thoroughly wash the window on both sides.
2. Further, using a spray bottle, the film must be treated with a solution of soap (preferably liquid) diluted with water. Application should be on one side only. Thus, you can safely move the product on the glass until you reach the desired position.
3. Then the film must be applied to the surface. As soon as the product is fixed on the glass, use a spatula to smooth out the defects.

After that, the film should dry. The final step will be to remove excess material until the desired size is obtained.

In this video, you can clearly see how to stick a sunscreen film on a window:

The idea to stick a protective coating on the windows, as a rule, arises with the arrival of heat. It can both protect the home from the sun and prying eyes, and protect the glass from mechanical damage. Next, we will consider how to glue the film on windows correctly, what types of it are distinguished, and also whether it is possible to glue the windows with glue. It is worth noting that this technology is suitable, which can also be seen in the video presented, for both wooden and plastic windows.

Main varieties

Today there are many types of film coating. Some are designed for one specific purpose, such as UV protection, while others combine multiple functions. In the production of films, spraying with aluminum, bronze, as well as titanium and nickel is often used. In some cases, silver and gold plating can also be used. So, let's consider the main types of film coatings for windows:

• Sun protection film

Tinting is capable of almost completely blocking the sun's rays. It is very often used not only to protect homes from ultraviolet radiation, but also in office buildings where paperwork is carried out. The sunscreen film helps to somewhat cool the room during the intense summer heat, and in the cold season, on the contrary, it helps protect against hypothermia.

• Mirror film

This material, unlike the previous one, has mirror characteristics. Thanks to this, the coating allows not only to protect the room from ultraviolet radiation, but also to fully reflect the sun's rays, which will make the rooms cooler and more comfortable to stay. In this case, the foil can cover both the inner and outer surfaces of the window, protecting it from fogging.

• Shockproof coating

In addition to UV protection, the shockproof film is also capable of protecting glass from mechanical damage. Most often, such materials are used in office buildings, as well as where a large number of people pass. In residential premises, shockproof coating is used quite rarely. Instead, you can often find fireproof films on the windows.

• Decorative materials

Decorative film can have a variety of colors and various patterns can be applied to it, which allows you to bring any design fantasies to life. Protects such a coating from ultraviolet radiation is not very good, but it looks very beautiful. The decorative film can be either transparent or matte.

How to make sun protection?

Now we will consider whether it is possible to glue a sun-protective film on the windows and how to do it correctly. First, you need to prepare the following materials and tools:

• window cleaner;
• rubber or plastic spatula;
• spray bottle for water;
• sharp knife;
• tinting;
• glue.

In order to glue the tint correctly, the room temperature must be at least + 5 ° C. You should also avoid extreme heat and direct sunlight, which can deform the film materials during operation. So, in order to glue the sun-protection film on the windows, you need:

• wash the glass on both sides with a special product;
• use a spray bottle to apply soapy water or glue to the film surface;
• gently attach the film to the glass;
• remove air bubbles with a spatula;
• leave the glass at rest until it dries completely, after which you can trim off the excess.

It should be noted that the film coating can cover both the entire glass and only a part of it.

Installation of mirror coatings

In order to glue the mirror film on the windows with your own hands, you need to prepare:

• window cleaner;
• scraper;
• stationery knife;
• spray;
• rubber or plastic spatula;
• foil or self-adhesive mirror film.

• clean the glass on both sides with a special tool;
• remove old and difficult stains with a scraper;
• wipe the surface thoroughly with a soft cloth;
• cut off the required amount of film or foil;
• clean the self-adhesive film from the protective layer;
• evenly distribute the material over the surface, and cut off the excess with a clerical knife.

Typically, the mirror film is completely fixed to the surface within a week. At this time, it is advisable to avoid drafts in the room.

People who get into our house through windows often cause a lot of inconvenience. Ultraviolet radiation negatively affects your well-being and mood. A sun-protective film on the windows will help protect yourself and your loved ones from this.

The main purpose of films

The sun's rays penetrating into living quarters can spoil any interior, because walls, curtains, furniture are subjected to the burnout process. In addition, excess ultraviolet radiation negatively affects house plants, animals and the human body. Modern reflective films successfully solve these problems. They effectively reflect the energy of the sun, preventing the glass from heating up, as well as objects inside the apartment.

Film properties

The modern market offers many films that are able to prevent the penetration of sunlight into apartments and offices. Sun protection is achieved by multiple layers of aluminum and titanium metals. It is these metals that provide reflection of ultraviolet rays and absorption of heat, while the transparency of the glass remains the same. The sun-protective film on the windows will help not only protect the interior of the apartment - it will also ensure a comfortable stay for pets and active growth of plants.

Films on windows are capable of reflecting and absorbing up to 90% of solar radiation, as well as up to 70% of heat, providing a cool climate and protection from solar radiation. Films are available in various shades and have a different degree of toning. Depending on the level and amount of penetrating light, you can choose a film with a different degree of toning, which will allow you to control the penetration of rays and provide comfort.

Sunscreen film on windows: types

Today there are many types of films with different characteristics and applications. There are products, the installation of which is quite simple and can be carried out independently, without the involvement of specialists. The only condition is clean glass. As a rule, such films are applied to the inner surface of the window. The thickness of the protective material ranges from 110 microns and more, depending on the manufacturer.

Reflective sun-protection film on windows has quite different parameters. Reviews of people who used this option confirm that in addition to protection from ultraviolet radiation, it is resistant to mechanical stress. The minimum thickness of such a film is 300 microns.

Depending on the efficiency, there are two types of films:

• medium effective - transmit up to 40% of the light and filter up to 70% of the sun's rays;
• highly efficient - reflect the entire ultraviolet flux, transmitting more than 50% of the light.

All reflective films comply with environmental standards, they do not burn, do not emit toxic substances.

Preparatory work

It is not so difficult to stick the sun-protection film on the window, but the procedure still requires certain skills and knowledge. Therefore, it is necessary to strictly adhere to all the rules and recommendations, if it becomes necessary to independently perform this work. First you need to make accurate measurements of the glasses that need protection. After that, the required amount is calculated and the material is cut, adding 0.5 cm of stock to each side. You should know that rolls are produced in standard width - 1.52 meters. For convenience, marking and cutting are carried out on any hard surface using a felt-tip pen, ruler and scissors, while each corner must be verified.

Installing sun protection film on windows: features

Reflectors can be installed on the glass on the inner surface, on the outer surface, as well as on the inside of the glass unit (as a rule, this happens at the enterprise that manufactures the windows). The maximum effect is achieved when the film is adhered to the outer surface. The sun's rays are reflected without heating the glass unit. When installing the film on the inner surface of the window, the efficiency can be significantly reduced. After all, the double-glazed window is heated, and the effect of a heater is created.

How to glue sunscreen films on windows

Do-it-yourself installation is usually carried out only on the inner surface of the window. To do this, it is necessary to prepare in advance a mixture of purified water with shampoo (for half a liter of water, 5 drops of shampoo), a window cleaner, a spray bottle, a spatula and a knife. First you need to wash the glass until it is completely free of dirt, dust and possible grease stains. After that, the mixture is sprayed onto the adhesive side of the film and onto the glass with a spray gun. This is necessary so that you can move it on the glass until it takes an optimal position. After that, you need to get rid of air bubbles. To do this, moving from the center to the edges, smooth the film with a spatula.

Well, we told how to glue the sun-protection film on the window. By the way, there is an important point that must be taken into account. If the inner glass is coated with energy-saving spraying, the adhesion of the film may cause the glass to shatter. Thus, in this case only external use of the reflector is possible.

Benefits of using solar reflectors

The use of sunscreen films has a number of advantages that can be appreciated literally in the first days after installation. In the summer months, it will be possible to significantly save on electricity, since the air conditioner will turn on much less often. In winter, heat losses will decrease, which will also save the family budget. In addition, reflectors protect the home from the penetration of sunlight, as a result, the interior of the apartment, furniture and objects will retain their original color, and the quality of life of the inhabitants will become much more comfortable. It should be noted separately that the material we are considering is additional noise insulation, and in the event of an accidental hit of a foreign object in the window, the glass will not crumble into pieces.

Removing the film

There are many sources of information on how to stick sunscreen film on a window, but sooner or later this film has to be removed, and then certain problems may arise. Dismantling is a process that requires certain skills and free time.

There are several ways to clean glass.

1. Mechanical. The film is cut into strips with a sharp knife, the edges are lifted and subsequently removed. However, this can damage the glass, plus everything, the method in question takes a lot of time if the volume of work is large.
2. Chemical method. Ammonia is applied to a cloth, which is attached to the surface of the glass and left for several hours. After that, the film is easily removed without leaving any traces. It remains only to thoroughly wash the surface.
3. With the help of equipment. A construction hairdryer of sufficient power does an excellent job with this task. Under the flow of hot air, the film begins to rise. Better to move from the edges to the center. After removing the reflector, a small amount of glue remains on the glass, which can be easily removed with a special solution. This method allows you to remove the obsolete sunscreen coating much faster without damaging the glass surface.

The use of tint films for windows is an inexpensive, but the most effective method of protecting against the effects of solar radiation. Such material is able to delay up to 99% ultraviolet... Moreover, the tint film for windows is capable of minimizing the level of infrared radiation by up to 80%. These indicators are quite enough to avoid possible overheating of the room in hot weather.

In the manufacture of tint films, they resort to the use of polyester, which significantly improves the strength and elastic characteristics of the material. It also improves the light transmittance of the film. Such material is extremely environmentally friendly. It is non-toxic and completely non-flammable.

The unique technology of film production allows minimizing the amount of incoming solar energy without significant loss of optical visibility. In most cases the material consists of several layers... Individual variations of this type of product may contain a combination of a colored layer laminated with a film. From above, the coating is presented in the form of a finely dispersed metallized layer. Due to this, the colored layers located below are not subject to rapid fading.

The metallized layer acts as a kind of shield for solar radiation. As a result, one can expect an improvement in the protective properties of the film.

Important: In winter, such a coating allows you to reduce the level of heat loss due to partial shielding of thermal radiation inside the room.

The expediency of using a tint film on windows is determined by the subsequent increase in the impact resistance of glass. This material does not adversely affect the growth of indoor plants. The latter quickly adapt to the new mode of absorption of ultraviolet rays.

Types of tint films for windows

Today, manufacturers offer a fairly wide range of products of this type. Each of the presented variations has characteristic features that define the individuality of the film. The multilayer structure of the material provides high-quality protection against ultraviolet and infrared radiation.

During the production process, they can resort to the implementation of spraying with aluminum, titanium, bronze or nickel. In some cases, silver or gold can even be used for this. The connection of individual layers is carried out using a special device called a laminator.

1. Sunscreen film

Such a film is able to trap up to 99% of the sun's rays. It is most advisable to use this coating in offices or study rooms, where it becomes necessary to create appropriate conditions for working with a computer or important papers. The film on the windows from the sun protects individual elements of the interior from fading, and also reduces the level of load on the air conditioner - in the summer it allows you to additionally cool the room, and in winter it prevents hypothermia.

2. Mirror film

This material has a mirror effect. This variation of the film has the properties of filtering infrared radiation and sunlight. The implementation of such a coating avoids fogging of the windows. The mirror layer can be located on the inside or outside of the glass.

3. Protective film (shockproof)

In addition to performing its direct functions, such a film is additionally capable of protect glass from direct mechanical impact... Its presence allows you to avoid the appearance of fragments in case of damage to the window. There are some variations of films that can minimize the negative effects of an explosion. They are most often used in crowded places. In living quarters, a fireproof protective film can also be used, which is able to delay the spread of smoke and fire for a short time.

The decorative film can be of different colors. A large number of shades allows you to solve design problems of various levels of complexity. There is a decorative film with a graphic design. The surface of such material can be matte or transparent.

5. Architectural film

Another type of window tint film that can be used to solve design problems. Most often, it is used during the design of building facades. The architectural film is glued to the outside of the glass. Additionally, it provides increased strength and protects against direct mechanical stress.

And you can, on the contrary, use the sun to your advantage and Details are here.

Color gamut width

Balcony and loggia tinting, or other room in the house, can be done using different material variations. When resolving this issue, you can choose a film that meets the necessary color requirements. A wide palette of colors allows you to achieve the desired result without any problems.

The transparency level of solar control films for windows can vary from 15% to 35%. Provided that a silver coating is used, this figure can reach 50%. It should also be noted here that the classic silver mirror film can be realized from the outside of the glass.

Features of gluing

When performing installation work, certain nuances should be taken into account. In this case, the resolution of this problem will not be fraught with significant difficulties. It is necessary to focus on the need to comply with a certain temperature regime. When gluing the tint film in the room, the temperature should be kept from +5 to +40 degrees.

It is also very important to control the humidity level in the room. This indicator should not exceed 80% and be below 20%... Moreover, when performing installation work, it is recommended to resort to the use of a sprayer as often as possible, which creates the necessary humid environment in the immediate place of gluing.

At the preparatory stage, you should carefully get rid of dust on the glass surface... The film must also be free of foreign particles. Otherwise, the quality of the toning will be too low, as a result of which there will be a need to repeat the work.

Please note: When removing the protective layer from the window tinting film, it is very important to ensure that no dirt or dust particles get onto the surface. In a different scenario, the final result of the work done will be unsatisfactory.

Before gluing the tint film, you must carefully wash glass with detergent, which should not contain a large amount of abrasive substances. It is recommended to use a scraper to clean up traces of dirt.

Tinting of windows, including balconies and loggias, can be carried out from the inside or outside of the glass. To minimize the negative impact of weather conditions, work should be carried out from the inside.

Required tools

To minimize the amount of time required to perform glass tinting work, you should choose the right tools. An approximate list of equipment will look like this:

• stationery knife;
• spray;
• putty knife;
• paper towel;
• detergent.

The trowel should be as wide as possible and the detergent used should not be aggressive. It is best to use liquid soap or baby shampoo. The feasibility of using a paper towel is determined by the fact that it does not leave lint on the surface.

Sequencing

Compliance with the technology of the work allows you to count on a positive final result. Before tinted windows on the balcony, it is recommended to adhere to a certain sequence of actions, which in this case will look like this:

1. Glass preparation.
2. Film preparation.
3. Moistening the glass surface.
4. Removing the protective layer of the film.
5. Fixing the film on the window.
6. Displacement of water with a spatula.

Tip: To prevent the spatula from damaging the surface of the film, it is recommended to resort to using a rubber or plastic variation of the tool and pre-wet it.

It may take about a week for the film to dry. As excess moisture is removed, the coating will gradually lighten. Air bubbles that appear on the surface during installation will disappear as it dries.

Care features

Window tint film requires special care. So, it is not recommended to use products containing abrasive additives to wash it. Wipe the surface with warm water and soap, using a microfiber cloth. Provided that a sponge is used, this element should not contain too large pores, into which dirt can clog.

Balcony tinting: video

We invite you to watch a video on the topic of our article and watch the tinting process on the balcony.

And because of her, it is simply impossible to be at home, you have to save yourself in all possible ways. One of the simplest options is window protection. Let's figure out how to glue the sun-protection film on the window.

Choose a film and glue it to the window

Views

In the store, you can now find several types of window coatings and each of them will serve for a specific purpose. In total, three main types can be distinguished.

Protective

This film is designed to make the glass stronger and darken it at the same time. It is well suited for those whose apartments are located on the ground floors. So you save your home from prying eyes and protect it.

Matt

It is mainly used for interior doors and partitions. But it can be used on. For example, for windows in a bathroom or toilet. In addition, it also has the ability to reduce the intensity of sunlight.

Sunscreen

Usually it is done with a mirror effect to minimize the penetration of sunlight into the apartment and heating. On hot days, it will be a good addition to your lungs or blinds.

The main advantage of such a film is that it does not darken the glass and does not reduce visibility from the inside, while it is no longer possible to see what is in the room from the outside.

Advantages and disadvantages

Any product has both pluses and minuses during operation.

Advantages

• Thanks to it, the room does not heat up on hot days, so with this coating you will not need to use cooling devices and you will be able to save on electricity.
• In winter, on the contrary, it will keep the heat inside and will not allow the glazing to cool down quickly. This effect is achieved thanks to aluminum spraying.
• It protects wall coverings, floors and furniture from fading due to direct sunlight.
• Does not get dirty and does not accumulate dirt, unlike curtains.
• Products with different shades, such as bronze or gold, will look very stylish on the outside.

disadvantages

• The product is very thin and easily damaged during installation.
• A cheap option can ruin your glass. Under the influence of the sun, the coating literally dries to the glass and it is very difficult to remove it later. Therefore, when choosing the best sun protection, it is important to consider not only how to properly stick the sunscreen film on the window, but also what quality material to choose.
• It does not save you from prying eyes in the evening, because the glass will shine through due to internal illumination. Therefore, if you live on the ground floor, you will not be able to remove the curtains.

How to stick sun film on windows

You will need

• Pure water. We recommend using bottled water as it does not contain impurities that can remain on the glass as a residue.
• Lint-free fabric. You can find similar fabric at your hardware store or auto store.
• Streak-free wiper.
• Rubber and metal spatulas.
• Spray bottle with soapy water.
• Sharp scissors.
• Stationery knife or blade.
• Large ruler.
• The film itself.

Before you stick the sunscreen film on the window, in the room. This is especially true for those who have pets. This way you can avoid getting wool on the bonding surface. Renovation work or outdoor asphalt paving can also interfere with installation, as the flying dust will cause a lot of problems with pasting. We advise you to wait until the completion of the repair.

Observe a certain temperature regime. The optimum temperature for such work is 25 degrees Celsius. If the room is cold or there is a draft, the glue will take a long time to dry. Also try. Thanks to this, the product will lie evenly and neatly.

Glass preparation

To begin with, the glass must be thoroughly washed with soapy water, and then cleaned with a special liquid to remove all stains.

Pay special attention to the edges and corners. If they contain strong contamination, then they must be removed with a metal spatula or scraper.

Examine the glass for lint and hairs. They can cause unpleasant bubbles.

Pasting process

After cleaning, cut out the material. Do not forget to leave allowances of 3-5 millimeters around the edges, which will subsequently be cut off. You need to cut with very sharp scissors or a blade. If the roll is very narrow and it is not enough for the width of the entire glass unit, then the product will have to be glued end-to-end in an inconspicuous place.

For added convenience, place the material on a pre-prepared surface, such as a scratch-free board. Then put a ruler on it and take measurements, after that, holding the ruler, draw along it with a blade. This will create a perfectly straight cut line.

Look at the material on the roll to determine which side to glue the sun protection film to the window. The protective layer, on which small instructions can be written, is always adhered to the adhesive side. It should be applied to the glass.

Now spray onto the glass with a spray bottle. Remove the protective layer from the cut out blank and gently attach it to the glass. Now it is important to evenly and neatly distribute it around the entire window perimeter, a rubber spatula will help you with this.

Moisten the product from the back side, so that the spatula glides better and does not accidentally tear the coating. It is necessary to smooth the material from the center to the edges. The stronger the pressure, the more moisture will come out and the work will dry out faster.

Trim off excess material and let the surface dry. All is ready.

You can watch the detailed process in the video.

Elimination of defects

Even with observance of all the rules and accurate performance of work, you may encounter some troubles. There are several ways to resolve them.

• If you notice bubbles on the finished surface, then you can try to spread them with a spatula to the edges. However, this does not always help. In this case, pierce the area with a needle and iron the fabric.
• Do not be intimidated by cloudy spots. It can be a soapy solution, which will evaporate through micropores under the influence of the sun.
• In the hot season, you may encounter a problem that the product adheres to glass very quickly and unevenly. To avoid this, generously moisten the adhesive surface with water.
• A large amount of debris and dust under the material cannot be removed. In this case, the work will have to be redone.

Care rules

In order for the product to serve you for a long time, you need to follow the basic rules of care.

• Do not touch the film after installation for a month, otherwise it may slip. This applies to and.
• For cleaning, do not use aggressive chemicals, hard sponges and washcloths. They can stain or damage the finish.
• If solid dirt appears on the surface, it is better to carefully remove it with a rubber spatula.

• Prepared by: Julia Wegner