One of the most convenient and prettiest curtain options is blinds. The trouble is that it's enough expensive pleasure, and not everyone can afford it. But you can make your own blinds from paper or fabric. The result will not be exactly the same, but homemade blinds will perform the main functions: hide the room from the bright sunny color and decorate the window.

Paper made from wallpaper

Done paper blinds do-it-yourself (as in the photo) is an excellent temporary solution for those who cannot yet afford purchased ones, but are planning to do so soon. They look impressive and protect from the sun. Any sheet of thick paper a quarter longer than the window opening will do.

But it’s easier and more convenient to make blinds with your own hands from wallpaper (for example, non-woven wallpaper for painting). The width of the product will be equal to the width of the opening. It is better to choose a tape for lifting blinds to match the color of the paper. You will need a cut longer than the window, with allowance for knots and bows.

If the material is not monochromatic (for example, wallpaper with a pattern), when making blinds with your own hands from paper (as in the photo), you need to make sure when cutting that the pattern is even and does not skew to the side.

The cut sheet must be folded like an accordion. The width of the folds is 3-5 cm. You need to ensure that the folds along the entire length are the same width. If your eye is not good, you should mark the canvas with a pencil.

Video “How to make blinds with your own hands from wallpaper master class”:

All the resulting folds must be collected into one strip, mark the middle and punch holes with a hole punch (you can use an awl or a screwdriver). To prevent the holes from spreading, you can secure them with tape on both sides and punch them again. Next, you need to thread a ribbon or cord through the holes and straighten the sheet. Seal the top bar of the curtain together with the cord with tape.

Video “Do-it-yourself blinds from A4 paper”:

Glue a small piece of paper to the bottom edge on one side. Connect the two lower corners and glue them together using this piece. The result will be a “peacock tail” pattern. Pull the cord through the remaining hole on the fold to the wrong side. Put on the clamp - it will be used to regulate the opening of the curtain. The end of the lace can be decorated with a bow, bead, or tassel.

Do-it-yourself horizontal blinds from paper are ready. Now you can hang them on the window with double-sided tape.

Tip: another option is to thread two parallel cords through the curtain. So there will be no semicircle at the bottom, the product will come out similar in style to purchased blinds.

Fabric

To make fabric blinds with your own hands you need:

A rectangular piece of fabric is cut out, equal to the width and height of the window with allowances for seams, a bottom pocket and a fastening at the top. The side edges are processed, a pocket is sewn at the bottom for a weight bar (it will be suitable as a bar wooden slats along the width of the window or a piece of aluminum profile).

The treatment of the top depends on how you plan to mount the blinds. It can be hung with Velcro on wooden beam and fix it on the wall, as well as attach it to the finished cornice. The piece required for fastening is measured, the rest of the fabric is marked for future folds.

The optimal width of the fold when making fabric blinds with your own hands is 10-20 cm, the distance between the marking lines should be twice as large. When marking, you need to make sure that there are no residual residues left on top.

You should stitch the braid along the marked lines and thread thin plastic slats into the resulting pockets: they will hold the shape of the folds.

Next you need to mark lines for the vertical laces and sew rings onto the braid along these lines. Three cords are enough for a standard small window. Required amount rings will be equal to the number of folds multiplied by three.

Video " Fabric blinds with your own hands":

The laces are threaded through and the curtains are secured with knots at the bottom. The upper rings are hung on the cornice (you need to make hooks on the cornice for this purpose if they are not there). Through all the upper rings, the cords are routed to one side. To fix them on the wall you need to nail a bracket or hook. The curtain is ready.

Wooden

Can be done wooden blinds with your own hands with rotating slats, like store-bought ones.

Bamboo blinds

The amount of material is calculated: the height of the window opening is divided by the number of lamellas. The width of the lamella is no more than 12 cm (in the closed position the plates do not go end-to-end, but with an overlap of 1 cm, this centimeter must be added to the width of each plate).

The length of the horizontal lamella should be slightly narrower than the opening in order to fit into it and completely cover the glass. Wood planks may need to be ordered from a workshop.

Tip: you can make curtains and blinds with your own hands, but single blinds made of bamboo look best on windows. In addition, it is lighter and more durable.

At the ends of the lamellas you need to attach attachments - small planks. Drill holes in the upper attachments and insert hooks for hanging curtains. At the top and bottom of each plate, 12 mm from the nozzle, you need to drill small 2 mm holes for the laces - necessary to rotate the slats.

Video “How to make wooden blinds. Technology":

The laces are threaded through the holes and glued to each connection point. The blinds are attached to the top rail with prepared hooks. A cord is threaded through the fastening hooks and looped down.

In a similar way you can make vertical blinds do it yourself, only in this case the slats are cut based on the width of the window and attached vertically. For top fastening, it is better to use a profile cornice with runners - they tend to turn and will turn the slats when the cord is pulled.

Roller blinds

If you are going to make roller blinds with your own hands, then the best option versions - fabric with braid ties. This design is manually adjustable.

The dimensions of the blanks are equal to the width and height of the window with seam allowances on all four sides. The fabric is made double, and two fabrics are needed, for the front and back sides. The blanks are sewn together on the reverse side. One side remains open, through it the canvas is turned outward. This seam is also closed.

A tight pocket is made for the top bar - strips for attaching the roller blind to the frame. The strap is threaded into the pocket. You can wrap the fabric around the block and secure it with a stapler.

A pocket is also sewn at the bottom of the product and a strip is inserted.

Video “We make roller blinds for windows with our own hands”:

A ribbon or braid is thrown over the top bar. Its ends should hang below the finished canvas from the face and from the back. The tape is secured at the top with a stapler. When raising the curtain, the canvas is wound onto the bottom rail and fixed with the ends of the tape at the desired height.

It’s up to you to decide what type of blinds to make with your own hands (fabric, wood, paper, wallpaper, horizontal or vertical, regular or roller blinds).

Today I want to offer you step-by-step photo instructions for decorating your windows with wallpaper blinds with your own hands. This is a very interesting, unexpected, low-cost and easy solution for “on a quick fix» hide your personal life from prying eyes, which can be replaced by manufacturing, since these blinds are also made up.

And so, to make such blinds you will need wallpaper (you can take the leftovers that you have), scissors, Double-sided tape, not a thick rope (I took very thick silk threads, which I specially bought for making lifting mechanisms in lifting curtains), a clamp and an end cap, a hole punch or an awl.

First, you need to measure the height of the window and cut off a piece of wallpaper with a margin, since the folds “eat up” the height of the curtain.

My window height was 133 cm, I took 170 cm.

Then, on the wrong side, I marked the folds using a ruler, the width of which was 3.5 cm.

Using a hole punch or an awl, you need to pierce holes in the edges of the folds of future blinds:

Then we stretch a rope into these holes to make a lifting mechanism:

We fix this rope at the upper end of the blinds, and fix it from the inside with double-sided tape:

We lay the bottom edge of the blinds in a “peacock tail”, folding several folds (I got 8 of them) in half, and fixing them with glue on both sides of the punctured hole so as not to glue them lifting mechanism:

Now we attach the clamp to the rope, thread the end cap through it, tie a knot, and close the end cap. You can do without a limit switch, simply tying a knot at the end of the rope so that the latch does not accidentally come off:

DIY wallpaper blinds step by step instructions

DIY wallpaper blinds step by step instructions

The blinds are ready. Now we remove the protective paper from the top edge from the double-sided tape, and glue the blinds we made directly onto the tape onto the window:

Finished blinds, photo:

You can raise the blinds using the clamp, securing it to the desired height:

That's all. If you liked this master class, leave your feedback at the bottom of this article.

You can also watch a video master class on making homemade blinds

Paper blinds Lately They are extremely popular among housewives who want to create unique comfort. This window decoration option is universal and multifunctional. But about the method of making blinds from regular wallpaper Not everyone knows. This solution looks economical and original. To create such a product you need to have a minimum of knowledge and skills. In this publication you will learn how to create blinds from wallpaper with your own hands.

The heat of summer days, even the most resistant to high temperature It forces people to hide from the merciless rays of the sun. This is especially true for residents of high-rise apartments with windows facing south. But not always financial opportunities allow you to buy high-quality blinds. Sometimes there is no time or desire to wait until they are made in accordance with the required parameters

That is why the question of how to make blinds with your own hands is becoming more relevant than ever. For production you will need materials that everyone has at home. Besides, in given time using wallpaper blinds with your own hands (photos of the use of such products can be found in the interior) is a common occurrence. This is not only an original, but also an affordable element of room decor. Also this reliable protection rooms from overheating, and curtains from burning out.

Paper blinds fit harmoniously into the design of any room. But given the characteristics of the material, it is better not to use curtains in the kitchen and other utility rooms. Blinds made from wallpaper look organic on the windows of a dacha, veranda, loggia and on.

This product has many advantages:

• you can easily create it at home with your own hands;
• reliably protects the room from sunlight;
• decorates the window in an unusual way;

• it is possible to use any pattern or design;
• does not interfere with flowers on the windowsill;
• suitable for any interior style;
• can be changed every week.

Paper blinds will prevent unnecessary waste, and will also save owners from the repeated need to go to the workshop. You only need to spend an hour or two on a homemade curtain, no more.

• short service life;

• rapid wear;
• They look cheap compared to salon models.

DIY window blinds: types of structures

The West Indian Indians invented blinds. Their models were distinguished by the presence of shutters with inclined wooden slats, which reliably protected from the sun. Such blinds were called colonial.

Venetian blinds appeared in the 18th century. The design of this model was characterized by the fact that internal sides They were fastened with hinges, and the outer ones with a cord. This made it possible to change the inclination of the lamellas in accordance with the time of year and weather.

Modern types of products are classified depending on the material from which the curtains are made and the method of their adjustment. Let's look at the most popular designs:

1. Vertical models are blinds in which the parts are placed vertically and can be rotated at the required angle. You can adjust the rotation of the slats using a cord.
2. Horizontal products - curtains designed in a “ladder” system. The slats are placed horizontally and are adjusted using a special drum.
3. Roller blinds are blinds in the form of a sheet of fabric or paper that are rolled into a roll using a special mechanism. Such products - perfect choice for the living room.
4. Pleated blinds - the curtain material is folded in the form of an accordion. Adjustment is carried out with special cords and tapes, at the ends of which there are special clamps.

When choosing blinds, you need to pay attention to the shape of the window for which the curtain is intended, as well as the material and ease of adjustment.

Helpful advice! People who want to independently control the level of light in the room are better off choosing horizontal models or pleated blinds.

What is needed to createDIY blinds

The question of how to make blinds yourself interests many women. Even people who have never done needlework can make curtains from wallpaper. But before starting work, you definitely need to select the material for the product, tools and decorations for decorating the finished curtain. And the process of creating blinds will take no more than 2 hours. Production time depends on the selected model.

To make blinds from wallpaper with your own hands, you will need the following tools:

• sharp scissors;
• hole punch, awl or similar tool;
• ruler;

• tape measure;
• pencil for marks.

Such devices are available in any home, so you don’t have to buy them specially. The material you need to find is:

1. The basis of the curtains is wallpaper. You can use leftovers saved after renovation.
2. To fix the position of the blinds, tape or decorative cord is used.
3. Glue for joining parts.
4. Regular and double-sided tape.
5. A retainer (an ordinary bead, a clothespin matching the color of the wallpaper, or a hair clip will also work).

Helpful advice! The quality of the curtain depends on the properties of the base. The better the material, the better the blinds will be. It is recommended to choose thick wallpaper, thanks to this the product will not tear for a long time.

If you choose a restrained color of the canvas, the curtain will fade slowly, which means it will retain its aesthetic appearance for a long period of time. It is also best not to use material with a pattern that is too large, as this may affect visibility in the room.

How to make blinds from wallpaper with your own hands: step-by-step instruction

Blinds made from wallpaper are often used on windows in dachas, loggias, balconies, verandas, as well as in rooms whose windows overlook sunny side. They look original, and production costs are minimal.

These products are ideal for windows. non-standard sizes, because often buying curtains for these windows is problematic. In addition, these models, due to the density of the material, are able to completely protect the room from sunlight.

Before starting work, be sure to remove everything unnecessary and prepare workplace. After all, for the production of high-quality and beautiful curtains you'll need a lot free space. It is important to prepare everything necessary materials and tools.

Step-by-step instructions will help you easily make blinds from wallpaper with your own hands:

• using a tape measure, measurements are taken of the window glass for which homemade blinds are made;
• since the fabric of the product bends horizontally, you need to add one-fourth of its length or 30-40 cm to its length. In this case, the size will be correct. There is no need to change the width. For example, if the height of the window frame is 135 cm, you need to add another 25%, which in this case is 35 cm. As a result, a length of 170 cm is required;

• the length of the decorative cord or ribbon should be larger size products, it is necessary to take into account tying bows or knots. This value is also influenced by the method of fixing the lower part of the blinds;

Related article:

Types of roller blinds. Advantages. Window installation options. Features of installing roller blinds with your own hands.

• Next, lay out the wallpaper and cut out the required rectangle from the material. It is important to ensure that the design on the canvas is not distorted or cut off. To prevent the roll from curling on the table, its edges can be pressed with a small weight. If the window is wider than the wallpaper, then you can use glue or tape to connect the two panels;

• mark the corrugation and bend the fabric. The stripes should be even and parallel to each other. It is better not to make the fold width more than 7 cm. Optimal size from 3 to 5 cm. To ensure that the bends are even and clear, it is recommended to use a ruler;
• I need to try on an unfinished curtain for the window. If necessary, the excess should be cut off;
• Depending on the curtain model, the middle of the folded material is marked with a pencil, or marks are left 15 cm from the edges for piercing holes. In the first option, one cord will be passed through the center of the blinds, in the second - two on the sides;
• Use a hole punch to make holes along the marked strip. An awl, screwdriver or any other similar tool is also suitable for this. The resulting hole must be slightly widened so that a rope or tape can be passed through it freely;
• To strengthen the paper, use tape. To do this, it is necessary to paste over the holes on both sides, after which they are re-done with a hole punch;
• then a strong ribbon or cord is pulled through the holes, then the accordion is straightened along the canvas. The upper end of the tape is fixed with a knot;

• Attaching the blinds to the window is done using double-sided tape. To do this, at the end of the curtain, on the fold, glue a strip of adhesive tape so that it completely covers the fold of the fabric. After that protective covering can be removed and the product is attached to the window;
• At the bottom, the blinds are shaped like a fan. To do this, the last few strips are connected to each other with PVA glue or glued with tape. A cord or tape is secured from the window. Another option for decorating the lower part of the curtain is to leave it rectangular, tying it with ribbons at the bottom;
• To ensure that the blinds do not move apart along the entire length of the rope, a lock must be put on the lower edge. You can use a regular bead as it;
• the product is ready.

This is one of the options for making window blinds from wallpaper, but there are a lot of such instructions. The order of the design creation points will be similar, but there may be some differences that depend on the type of blinds.

There is an even simpler option for making pleated blinds, in which you don’t even need to thread the tape. In this case, the required length of wallpaper is folded like an accordion, as in the previous version. To frame ready-made curtain It is attached with double-sided tape, and the lower part is fixed with a clothespin or hairpin, forming a beautiful peacock tail.

Helpful advice! The holes through which the cord is threaded must be covered with tape, otherwise the product will quickly collapse.

Making curtains and blinds with your own hands from paper is very easy, quick, and most importantly - cheap. You can use unnecessary pieces of wallpaper that remained after repairs, and ordinary utility tools. Decorate ready product It is recommended to use rhinestones, sparkles or patterns. If desired, the blinds on the side facing the street can be covered with foil. This will help reflect ultra-violet rays, preventing them from heating the room.

In the case of arched windows, paper blinds will help you decorate them stylishly with elegant wallpaper fans. This method will not only protect you from the sun, but will also bring a special charm to the interior and emphasize the unusual shape of the window.

If there is a need to close only top part windows so that the sun's rays do not fall on specific area rooms, for example, a desk or a baby's cradle, then a curtain in the form of a fan will suit best way. You can attach it to one of the corners of the frame. This option looks original and stylish both inside and outside.

You can also watch a video on how to make blinds from wallpaper with your own hands.

Wallpaper blinds: varieties of paper products

Homemade blinds can add variety and unique color to the interior of a room. There are several options for such products. Let's look at them in more detail.

Accordion-shaped curtains with a ribbon or cord and a model with a similar design, but with two tightening ropes, are extremely popular. Usually in such products they are located vertically and parallel to each other, but different sides from the edges. Photos of wallpaper blinds will help you harmoniously fit this model into the interior of the room.

It should be remembered that to make such a curtain you need two fasteners, and the consumption of cord and tape will be twice as much. This model is identical to real factory curtains. Such blinds perfectly cover windows, which means they protect residents from the sun’s rays and the prying eyes of passers-by.

Paper roller blinds are very popular. They look impressive and also cope perfectly with protective function. Since such models fit tightly to the window, they perfectly darken the room. Making roller blinds with your own hands is very easy. Often, fabric rather than paper is used as the basis for such a product.

Helpful advice! To create roller blinds, it is recommended to first use paper. After all, a piece of damaged wallpaper will cost the housewife much less than a piece of fabric of the same size. But roller blinds made of material look more impressive.

No less original look paper blinds - Roman blinds. To make such a product, more material will be required, and some skills will also be required. But they look so original and beautiful, just like lambrequins or ordinary curtains.

Any version of wallpaper blinds will be an excellent option. decorative decoration window.

Making roller blinds with your own hands from wallpaper: master class

There are a huge number of ways to make paper blinds with your own hands, step-by-step instructions, master classes, thanks to which you can quickly get an original and cheap decorative addition to a window.

You can watch the features of making wallpaper blinds in the video. The main thing is that the curtain does not need to be folded into a pleated form, but simply rolled into a tight small roll. There is also no need to make holes for the cord. The fastening system for this type of blinds differs from previous models.

Before you make blinds with your own hands, you need to prepare the tools:

• drill;
• hacksaw for metal;
• pieces of wallpaper;
• metal tube with a diameter of 1.8 mm;
• a wooden or plastic plank for a plumb line;
• fastenings for blinds 1.4 – 2 m;
• superglue (for gluing fabric to metal);
• double sided tape.

Instructions for creating blinds with your own hands from wallpaper step by step with photos:

1. The window measurements taken are transferred to paper.
2. The length of the future product should be doubled. The paper must be folded in half - this will ensure the density of the roller blind. In addition, another quarter of the total length should be added.
3. The resulting piece is folded in half. The edges of the material are connected with glue or double-sided adhesive tape.
4. Cut off the metal tube to the required length.
5. Using a stapler, pockets are made at the ends into which small weights must be placed. You can also use a wooden plank or a plastic tube for a plumb line.
6. Glue is applied to the wallpaper and glued to the prepared tube.
7. Install blinds on the window. Marks are made on the frame according to the size of the curtain. Using a drill, attach the resulting product to the window.

You can make roller blinds with your own hands easily, quickly and efficiently; and they will be no different from store-bought options.

Double-layer paper curtains with an air gap: step-by-step instructions

This option is a little more complicated than previous models, which means it will take a little more time and effort than regular pleated. But such a product looks more stylish and respectable, and it also reliably protects the room from heat.

To make double-layer blinds, the wallpaper must first be marked and then cut into strips about 10 cm wide. The cut strips must be rolled into a tube and the edges glued together by 1 cm. There should be such a number of these tubes as to cover the entire height of the window.

When the glue dries, the tube must be pressed against a flat lamella so that the ribs are clearly formed on the sides of the part. You need to fold it so that the sizing area is in the middle of the top side.

Next, the middle line of each lamella is smeared with glue with a strip of about 1 cm, then all the elements are connected to each other. The glue should not spread during operation, so it is better to use dry glue. Leave the stack of glued tubes until completely dry. Only then can the resulting structure be expanded.

15 cm from the edges, using an awl or other similar tool, you need to make holes through which the cord is passed. It will not be visible from the outside, since it will pass through the edges of the ropes inside.

These air blinds can be hung using two rings tied to the upper ends of a rope. They are hung on hooks that are screwed into upper slope window opening. In case of plastic windows You should use double-sided tape, since the curtain made is very light.

Wallpaper blinds: video-instructions for creating a paper curtain

Self-made blinds from wallpaper - great choice, if you need to quickly curtain a window. A paper curtain made from the remnants of unnecessary wallpaper is excellent. homemade defense rooms from bright sun. Such blinds perfectly complement the design of an apartment or house and are a worthy alternative ordinary curtains.

Making such blinds for windows from wallpaper with your own hands is very simple and you don’t need to spend a lot of money and time. There are a huge number of master classes and instructions for creating blinds from wallpaper with your own hands step by step. This is what explains the enormous popularity of the products.

Reading time ≈ 8 minutes

If after renovation you have a few rolls of wallpaper left, you can use them to make blinds with your own hands, following simple step-by-step instructions and photos. Self-made blinds are perfect solution to save budget and use leftovers finishing materials. By spending just a few hours of time you will be able to make beautiful, original, stylish blinds.

An example of paper blinds made from wallpaper.

Advantages and disadvantages of paper blinds

Homemade paper curtains have a number of advantages:

• Low cost of material compared to real blinds. Often you don’t have to spend money on wallpaper at all, since it remains after the renovation. But even if you buy an expensive roll of wallpaper, it will still cost much less.
• No need for wet cleaning.
• Ease of manufacture.
• Easy to replace old or damaged paper curtains.
• Easy to attach and remove from the window.

However obvious disadvantage can be called a short service life, rapid wear. Wallpaper is likely to fade in the sun, which is why it will soon lose its original appearance. Since they cannot be wiped with a damp sponge, if they are heavily soiled, they will simply need to be disposed of. Also, due to the fragility of the material, paper curtains can be torn very easily if handled carelessly. This disadvantage can turn into an advantage if you like to frequently change the accents in your interior.

Another disadvantage may be cheap appearance products. Although in this case, much depends on the quality and color of the wallpaper itself, the craftsmanship, and how harmoniously they fit into the design of the room.

Installation methods and work planning

To decide on the right sizes piece of wallpaper, it is necessary to consider mounting options. Classic blinds can be mounted outside or inside the window opening.

1. External mount. The width of the roll should be 10 cm greater than the width of the opening. This mounting option is suitable for very narrow window sills.
2. Internal fastening along the width of the window. In this case, the width of the wallpaper coincides with the width of the opening. This option is also convenient for narrow window sills.
3. Fastening according to window frame. In this case, the width of the paper roll should match (+/- 2 cm) with the width of the frame. This method of fastening is optimal for a wide window sill in order to maintain its functionality, and the most acceptable in the case of homemade paper wallpaper.

Installation options for classic blinds.

Our master class will look at how to make paper blinds step by step with fastening to the window frame. Therefore, at the planning stage, take appropriate measurements of the window and compare the width of the opening with the width of the roll. If the window has non-standard dimensions, it may be more rational to make paper curtains from two pieces.

Required materials and tools

To create budget, original blinds you will need the following materials and tools:

1. Roll of wallpaper.
2. Tape measure/ruler from 50 cm.
3. Decorative cord or ribbon matching the color of the wallpaper.
4. Scissors.
5. A piece of double-sided tape.
6. Retainers.
7. Hole puncher (awl).

For making blinds from wallpaper, only varieties made from medium-weight paper are suitable. Vinyl wallpapers It will be extremely difficult to bend and use.

Necessary materials for making blinds.

Step-by-step production of paper curtains

When the measurements have been taken, the plan has been drawn up, and the tools and materials are at hand, you can begin making blinds from wallpaper with your own hands, following the clear step-by-step instructions with photo examples.

1. Mark the height of the window on the wallpaper, then add at least another 25% of this segment. Part of the additional length will go to the accordion, the other part to the fastening.
2. Draw stripes of the future accordion up to 3-5 cm wide on a section of the strip. If the width of the folds is greater, the curtains will look very untidy. The stripes must be perfectly straight. Fold the accordion so that the entire segment turns into a narrow strip. Cut off the excess.



Wallpaper accordion.

3. Next, you need to make holes in the accordion. There can be two options: to make classic blinds, you need to make two holes at the edges of the roll; to make a swag (a decorative element in the form of a “peacock’s tail”) you need to make one hole in the center of the wallpaper. Regardless of whether you make two or one hole, it should extend at least 10 mm from the edge of the folds.



Holes in the wallpaper accordion.

To punch holes, it is advisable to use a special hole punch to get neat punctures and not bend/damage the paper. In everyday life, a hole punch is often replaced with an awl or a screwdriver, but in this case you need to work extremely carefully so as not to bend the wallpaper.



Using a screwdriver to poke holes.

4. You need to thread a lace or ribbon into the hole. You should make a small secure knot at the top edge. The length of the cord after tying the knot should be equal to length piece of paper. You need to attach clips to the lower end and cut off the excess.

Fasteners can act as standard clips for ropes and cords, decorative clothespins, beads, paper clips and other devices. You can not use clamps at all, but fix the height of the blinds by tying decorative bows from rope or ribbon.



Example of fasteners for blind cords.

5. You need to glue double-sided tape to the upper edge of the paper piece (at the same time fixing the rope knot). There is no need to remove the protective film on the other side of the adhesive tape yet.
6. If you want to do decorative option with a fan at the bottom, you will need a piece of double-sided tape up to 20 cm long, the width should be less than the width of the accordion folds. The tape must be applied to one side of the bottom fold, then removed protective film and connect both halves of the accordion, as shown in the photo:



Apply double-sided tape to one side of the accordion fold.



Gluing accordion folds into a fan.

7. Finally, you need to tear off the second protective film from the tape at the top edge of the structure and attach the curtains to the window sash.

During use, the bottom fold of the curtain (unless it is made in the shape of a fan) will be deformed and deteriorate the fastest. To extend its life, you can glue a strip of cardboard to the bottom accordion (before making holes). This will make the entire structure heavier, so when raising the blinds they will need to be additionally secured with clothespins.

In general, the entire process consists of the stages shown in the illustration:

Step-by-step illustration of the process.

A quick way to make blinds

This option is suitable if you need to install temporary sun protection before purchasing store-bought blinds or curtains, but aesthetics and decorativeness do not play a role. This is a version of wallpaper blinds for the lazy, as it will take no more than 20 minutes to make. This structure can be removed and mounted as often as necessary.

Required materials and tools:

• a piece of wallpaper (length=window height+25%);
• a piece of cardboard;
• double sided tape;
• clothespins.

Description of the work step by step:

1. You need to measure the height of the window, measure desired length roll and add another 25% to this number.
2. Fold the wallpaper into an accordion, similar to the previous option.
3. The bottom fold of the accordion must be reinforced with cardboard using PVC glue, double-sided tape or stapler.
4. Attach double-sided tape to the top fold of the accordion, remove the protective film on the other side and glue it to the glass sash.

At night, the blinds will hang down freely. IN daytime The height of the blinds will need to be fixed using clothespins or clamps.

“Lazy” wallpaper blinds when lowered.

Decorating blinds with wallpaper or paper

You can use leftover wallpaper not only for making blinds, but also for decorating ready-made ones. window curtains. Blinds made of plastic, wood and bamboo are suitable as the “base”. With the help of such simple decor you can transform an old, boring interior, hide defects on blinds and add bright colors in room design.

This decor option is suitable for blinds with a slat width of 5 cm or more.

Required tools and materials:

• old blinds;
• a roll of wallpaper or colored paper;
• PVC glue or other for paper, brush;
• pencil;
• scissors;
• ruler.

Step-by-step progress of work:

The final view of the decorated blinds.

You can make your own blinds from wallpaper with your kids, because following the step-by-step instructions and tips in the photo, the whole process will be quick and fun. Homemade wallpaper blinds can be used for any room in the house, not only as a temporary solution, but also as permanent original window curtains.

You can watch the detailed process of making blinds from paper wallpaper in the video:

Blinds are universal mechanical curtains that are suitable for any room. In addition, they will be a great help if the apartment is being renovated, but you don’t want to cover the windows with old newspapers. In this case, you really need to make blinds from wallpaper. They take a couple of minutes to build with your own hands, last a long time, and you don’t mind throwing them away if they suddenly get dirty.

Paper curtains

Paper began to be used as curtains, or even entire partitions, back in the Ancient China. There this material was relatively accessible and inexpensive. Our mothers and grandmothers also made paper curtains. True, they took old newspapers for this, since they did not yet know how to make blinds from wallpaper with their own hands. So the whole yard knew which apartment was being renovated.

Today, paper blinds are not just a temporary necessity. They can be great decorative element. This can be done if you take beautiful paper as a base or do a special painting on it with artistic paints.

In any case, it’s easy to make a base for blinds from wallpaper with your own hands. Step-by-step instruction The entire process is illustrated with photographs, so even a child can handle the work. And you can decorate with such curtains either a balcony or a kitchen, or a living room with a bedroom.

Preparatory stage

Before you start making blinds from wallpaper with your own hands, you need to prepare all the tools and materials. For this work you will need: a roll of wallpaper, double-sided adhesive tape, hole punch, string, scissors and ruler.

First you need to measure the dimensions of the glass. These curtains are made the same width or slightly wider. Therefore, 2-3 stripes will hang on one window, depending on how many vertical sectors are allocated in the frame.

Next, we calculate the length of one strip. It should be much larger, because the paper is folded like an accordion, and a beautiful fan is formed in the lower part. It is better to take a small margin and then cut it off than to redo the entire strip because it is too short.

Last action preparatory stage- cutting blanks according to calculated sizes. This must be done carefully so that neat blinds hang on the windows, and not scraps of paper.

Working with an accordion

This stage of work is given special attention, because without it it is impossible to create blinds from wallpaper with your own hands. Step by step we mark the places of future bends. A ruler is perfect for these purposes. Or, as an option, take some kind of wide strip that ideally matches the width of the folds, and, applying it to the previous mark, mark both long sides.

Make sure that the marks are strictly opposite each other, and the bend lines are then parallel to the short side.

We begin to form folds. This is where it all begins difficult moment in creating blinds from wallpaper with your own hands. To make the work easier, the master class suggests using a ruler or a strip along which to make the initial bend, and only then iron it more clearly. The result should be a neat accordion that easily folds and stretches.

Making a lifting mechanism

We have almost created blinds from wallpaper with our own hands. The step-by-step process instructions then lead us to the moment of designing a simple system that will allow you to assemble the curtain up when the need arises.

Fold the accordion and find its center. At this point, a hole is made with a hole punch through which the lace is passed. At one end of the accordion it is fixed with a knot, after re-threading it into the outer hole. This will be the top of our blinds.

At the bottom of the lace we attach a special clamp-clamp with a spring. You can use an old one that was left over from a worn out jacket or tracksuit, or you can buy a new one from sewing store. The creation of blinds from wallpaper with your own hands is almost over, the master class of which we analyze in detail. Next steps already associated with decoration and mounting to the window.

Final stage

When your DIY wallpaper blinds are almost finished, you need to add a little zest to them. This will be a nice semi-circular fan-shaped bottom. It is obtained as follows.

We glue double-sided tape to one of the halves of the blinds from the hole to the edge. Then we bend the other half to it and iron it thoroughly. They need to be securely fastened to each other. The best way to do this is to use a stapler. We release the edges, and they themselves form a beautiful semicircular fan. If desired, you can correct it by ironing fuzzy folds.

If you figure out how to create blinds from wallpaper with your own hands step by step, then it is obvious that there is nothing complicated in this process. All that remains is to secure the structure to the window. This is also done using double-sided tape.

Decoration options

At first glance, it may seem that homemade blinds from wallpaper look rather poor. Photos also do not always convey the beauty of this invention. Additional decoration can correct the situation.

There are countless options. Firstly, the wallpaper itself has a whole host of patterns and textures. Combining them on a window can achieve a stunning effect. Secondly, different pictures are drawn on a white sheet of paper. The selection of the plot should be done in accordance with the peculiarity of the ribbed surface of the product. Not every drawing will look perfect under these conditions. But right choice will truly transform the room.

Thirdly, you can glue them to the folds themselves paper butterfly or make a full-fledged application, which will change slightly depending on the current state of the blinds.

Environmental friendliness, practicality and variability of blinds

By making blinds from wallpaper with our own hands, we solve several problems at once. First, let’s remember what store curtains of this type are made from. Few can describe the exact composition of this material. Sometimes unscrupulous manufacturers add cheap and at the same time poisonous components to it. By hanging wallpaper blinds, we definitely protect ourselves from the influence of dangerous chemicals that could constantly remain in our room.

The second point is related to the practicality of application. They are very simple and flexible. They don't require any additional fastenings, and the damaged strip is easy to notice with a new one.

This brings us to the third aspect - variability. Changing paper blinds is easy and inexpensive. This option will do, if you want to improve something in the interior, but don’t have the money for new expensive curtains.

Care

In everyday life, wallpaper blinds are unpretentious. They practically do not get dirty, and dust settled on the folds can be easily swept away with a regular brush. Yes, in some cases they may break. If the damage is small, you can patch it with regular transparent tape from the reverse side.

If the damage is critical, then the entire strip is replaced in 10-15 minutes, taking into account the fact that you will need to find in the pantry the roll of wallpaper from which this thing was made.

This is the perfect low-budget product to transform any apartment. Made even as a temporary measure, such blinds can take root for many years, taking their well-deserved place at the very top of the window.