Most apartments do not have a separate room for meals. Therefore, the dining area has to be arranged in the kitchen, despite the lack of space. It is impossible to imagine a dining area without a table. Therefore, we are sharing a fresh selection of dining tables that will fit perfectly into the interior of a small kitchen and will help to rationally use its space.

1. Folding table for the whole family

There is an opinion that a wall-mounted folding table is only suitable for one or two people. But this is not true at all. A folding table can be large, designed for the whole family. But in this case, it is worth taking care of the reliability of the structure by making the supporting elements more powerful.

2. Breakfast overlooking the street

The bar table is attached to the wall parallel to the floor surface. This option is ideal when panoramic glazing kitchens. But such a counter-table can be placed just above the window sill, placing bar stools next to it.

3. Functional double tabletop

An additional tabletop located above the main one allows you to create an additional work or dining area. In this case, not a single additional meter of space will be wasted. The main thing is to choose the right double countertop design so that the design looks modern.

4. Compact kitchen island instead of a table

There is an opinion that kitchen island Suitable only for large spaces. But the miniature frame fits perfectly into the interior of a small kitchen. Its functionality is beyond doubt, because it serves not only as a table or work surface, but also as a storage system.

5. Long narrow table against the wall

Hanging table rectangular shape looks much more interesting than the usual square one. Several people can eat at it at the same time. To ensure that the space of a narrow kitchen is not visually reduced, choose a table that matches the color of the walls.

6. Extendable mobile table

A table that can be pulled out from the main furniture if necessary - what could be more convenient? After all, it does not take up space in the kitchen. To further save space, the dining area can be supplemented with folding chairs.

7. Side table - continuation of the table top

An elongated tabletop, extending 30-50 cm beyond the furniture, can play the role of a small table. Its advantage is its 100% compatibility with the kitchen interior.

8. Window sill, smoothly turning into a table

If the idea of ​​setting up a table instead of a window sill seems inappropriate, then try a similar option. Kitchen countertop smoothly transitions to the window sill, continuing into the corner kitchen table ik.

9. Instead of a soft corner

Kitchen furniture includes an element in the form of seating. For convenience, there are soft decorative pillows. The table in this dining area is retractable.

10. Serving table instead of dining table

Serving table can successfully replace a dining room in the interior of a small kitchen. The main advantage of such a table is mobility. If necessary, it can be removed from the kitchen.

11. Spacious table

An extra storage system will never be superfluous in the kitchen. Therefore, it is worth taking a closer look at the possibility of making it in a miniature kitchen table. Another advantage of such a table is its folding tabletop, the area of ​​which can be increased if necessary.

12. Comfortable semicircular table

Ordinary round table for a small kitchen - not the best the best choice. More suitable solution there will be a semicircular table placed close to the wall. It is more comfortable to sit behind it, and in size usable area the countertops are not inferior to similar ones round model.

13. Compact console table

This table, which looks like a decorative console, has three size options. When folded, it is suitable for snacks or meals for one person. Its tabletop consists of two parts located on the sides of a narrow central element. If necessary, you can expand one or two parts, thereby adjusting the size of the table.

14. Almost a bar counter

This table is similar to a bar counter, but at the same time it looks more original. Several people can eat at it at the same time. At the end of the meal, the chairs are pushed into the table, which also helps rational use area of ​​a small kitchen.

15. Folding table attached to furniture

Table with sofas by the window.

Dinner Zone, stylized as cafe furniture, can transform the interior of a small kitchen. In addition, it takes up little space, but can become a place for eating the whole family.

18. Miniature shelf table

Small table Suitable for one or two people. Fixed to the wall with several fasteners, it will take up minimal space.

The problem of shortage square meters more than relevant? Then we recommend that you read

IN small apartments in small offices everyone counts square centimeter. That is why it is necessary to use the most compact and functional furniture. One of these pieces of furniture can be called folding steel. It takes up very little space and can be completely invisible.

Folding tables are used both in the kitchen and in other rooms.

It is important to select and install it correctly.

Peculiarities

A wall-mounted folding table is an excellent solution for a small room. When assembled, such furniture is a thin plank that is located near the wall, almost merging with it. When unfolded, this model can replace a full-fledged kitchen table or even an element of the living room interior. When unfolded, it can become a large tabletop, which can accommodate a family at dinner or all the guests.

The table is attached to the wall and usually has clamps in the form of triangular or U-shaped supports. The peculiarity of this piece of furniture is its small size. So, it can be placed even in the smallest room without cluttering it. In addition, you can choose absolutely any part of the wall to which it will be attached.

You don't have to take into account the shape of the countertop or its parameters when arranging the room. It is very ergonomic and will fit anywhere. Another feature is the functionality of this product. Even though it is quite compact, it performs all its functions and does a great job with it. It should also be noted fashion design such products. This piece of furniture can fit perfectly into the interior of any room and even diversify it. It will complement any room in style.

The peculiarity of this design is that it is quite easy to install. Most models in stores are presented in ready-assembled form; you don’t even have to assemble them from components. Thus, you can only come home and install the finished table on the wall, attaching it with screws and hinges. You just need to adjust its location on the surface and check how it looks and functions.

The main convenience is that when installing it, you don’t even need additional tools. It will not take physical effort or much time. A folding table is very functional model. It can be placed both in the kitchen and in the living room or office if it is small.

Often a folding table is installed in a nursery. There are some unusual models, which allow you to fix the tabletop in the required position by changing its angle. This way you can make a full-fledged desk for your child. In addition, you can change its parameters, taking into account individual characteristics.

This way you can make the work process more comfortable by well organizing workplace. This is a great solution for both children and adults.

Kinds

Now there are a large number of varieties of folding tables. All models differ depending on the type of their construction, purpose, design and additional capabilities.

Table transformer

This model is the most compact and multifunctional. This piece of furniture slides in and out very easily. It can be either a wall-mounted or a wall-mounted folding table. Most often, such models are used in the kitchen. This way you can pull out the table at the right time, turning the kitchen work area into a dining room. After you have dinner or breakfast with the whole family, you can fold it, creating a more compact version of the table, or completely assemble it, making it invisible among other kitchen interior items.

For the smallest kitchens, manufacturers have provided models without legs. They only have vertical mounting to Wall. Some products have only one leg for a more compact design. They are less reliable, so they should not be loaded.

A transforming table is also installed in a schoolchild’s nursery. It can also be adjusted according to the length of the table top: for classes it can be transformed into the longest version, and during games they fold very compactly down to the cabinet. If your child loves active games, then you can fold it completely and not worry that it will hit the corner of such a product. This way, the child will be able to play with the children without knocking over a single piece of furniture or getting injured.

Traditional folding table

This piece of furniture is a universal tabletop of special strength that can be mounted on any vertical surface. This could be a closet, a wall or another plane. A folding table is a universal piece of furniture that can bear more load. It is suitable for doing homework, placing on it large quantity books and even for a full family dinner. The most reliable area on such a surface is the area where the fasteners and hinges are fixed.

If you install this product well, it will have its own quality characteristics comparable to classic reliable table. This is a very easy-to-use model that makes the room more spacious and does not overload it. As a rule, folding tables mounted to the wall have a regular rectangular shape or rounded edges.

The structures vary in length and width.

They can be selected depending on the parameters of the room and the availability of free space. You need to calculate how far you can recline such a table, and only then purchase this model. Externally, this product may look like a large shelf that is folded out when it is necessary to place some items on it.

But if you plan to greatly overload folding models, then it is better to purchase built-in products that have additional content - a storage system.

So, models with a mirror, drawers or shelves are very interesting. All these elements also fold together with the tabletop. As for products with legs, they are more stable and recline along with the tabletop. At the same time, models with chrome legs are often purchased because they look very elegant.

Wall table

Now manufacturers are presenting other special very compact models For maximum savings area. So, it can be a hinged folding table without legs. This vertical element may resemble a window sill in design. A hanging table takes up minimal space and usually has small dimensions. You can also find unusual products with sidewalls.

Folding bar counter

This model is most often installed in the kitchen, dining room or studio apartments for zoning. This is an excellent solution for those whose premises are decorated in modern style. It is a table with a folding structure that is mounted to the wall. Its feature is a rather long and narrow folding tabletop. So, about five people can fit along it.

Moreover, there are models that are attached to the wall on one side and mounted on the floor on the other side, and there are also more convenient mobile models. Such products have unusual design and glass or mirror inserts. A glass folding bar table looks very elegant and luxurious and can make the design of any, even the smallest, kitchen more interesting and fashionable.

Most often, models in the form of bar counters are purchased if the kitchen resembles a corridor in size and shape. This is an excellent solution for apartments whose layout does not meet the standards.

As a rule, the design of the bar counter is located higher than a regular tabletop, so you need to purchase high bar stools to go with it.

Folding table

This table can also have a folding design. As a rule, such models are installed in very small kitchens or balconies. This model is somewhat reminiscent of transforming products, but at the same time it has an important difference. So, its design is quite simple. The table has no additional functions or capabilities.

Its main difference from all the described models is that part of the tabletop is folded back, while part remains in its original form. That is, it is impossible to completely fold and tilt the table to a vertical position close to the wall. It can be folded into a small cabinet. This is a very convenient and functional option that can be used for permanent storage of some kitchen items, such as dishes, pepper shaker, sugar bowl and others.

When eating, it can easily be shared among the whole family. If you want to dine alone, then you won’t have to fold it back at all.

Mobile folding table

This is a very interesting model, which also has compact dimensions. It differs from the previous ones in that it is mobile, the most compact and interesting in design. So, you can move the table throughout the room. The tabletop below has guides along which the tabletop and the entire table structure can literally move along one wall. The guides are almost invisible and ensure the mobility of this product.

The table moves horizontally along a rail from one corner of the room to the other. As a rule, these models have legs that act as supports when tilting the tabletop. They fold down and completely merge with the wall. Such models take up very little space and do not interfere at all. As a rule, they are selected according to the design kitchen set and is most often used in the kitchen.

Design and mechanism

As a rule, a folding table is a wall-mounted model. These designs have a tabletop that is attached to hinges. The latter, in turn, will need to be attached to the wall. Folding table may have a leg - support. When the tabletop is brought into a horizontal position, the support moves to the side and the tabletop rises up. This way, you place the leg against the central part of the tabletop and ensure its stability.

The design of such tables is different in that the legs are fixed separately and are not connected at all to the main structure.

Most often, this element is joined into a deep hole, which is located at the bottom of the tabletop so that, due to awkward movements, the tabletop does not fall at the wrong moment. This is a very comfortable model with a leg lock, which is considered one of the most stable.

There are also models in which the support is already pre-attached to the bottom of the tabletop and unfolds along with it. On one side, this design has a stop, and on the other side, it is mounted on hinges. When unfolding the support, such a mechanism has a special recess, which is screwed onto the tabletop with self-tapping screws. Typically, the support has wall fastener, but there are also models that are initially attached to the base of the tabletop, and only then fixed on the wall. Folding legs are a very convenient part of this design.

Some models open according to the accordion principle. Thus, the entire structure folds completely in just one movement. This is a very convenient adjustable table that can be unfolded in seconds without extra effort. Very interesting are models whose design includes a flat support.

Such folding tables often include in the design an element in the form of a triangular-shaped support, which is fixed to the wall, located below the main part of the structure - the tabletop. Thus, you will need to lift the cover and move the support to the side. The mechanism rotates and is fixed either with a magnet or with ball clasps. These are very interesting in design and reliable in construction models.

Due to the presence of such a complex mechanism, they are less compact. The more reliable the tabletop and its support are, the more this product will protrude beyond the plane of the wall. So, on average they extend by 5 cm, but there are more voluminous models.

One more a good option is a model of a table on brackets. Brackets are most often made of iron, and also of stainless steel. The mechanism has a fairly simple design and can be presented in black or white. Models with chrome supports are popular. The structure itself may be more interesting in design, in contrast to its supports. The brackets are installed independently, without hinges.

This part of the mechanism is attached simultaneously to both the wall and the working surface of the table. When you lift the lid, this product automatically moves to 90° and locks in this position. When you want to fold such a table, you can activate the mechanism by lifting it up or pulling a special lever. This way the furniture will smoothly tilt back.

The principle of operation of such bracket legs is shown in the following video.

Another very interesting option folding table mechanism - gas-filled shock absorber. This product is reminiscent in design of the folding mechanism from the rear doors of domestic cars. The tabletop is hinged along the wall, and underneath there is a cylinder filled with gas. This design is held in a vertical position using a strap or special clamps.

When you begin to unfold the table, gas from the cylinder presses on the piston and lifts the tabletop up. So, the table quickly unfolds. To do this you do not need to use physical strength, and the structure will completely decompose in just 3 seconds. This is a very compact and convenient model that takes up very little space. The thickness of such a table when folded along the wall is no more than 2 cm.

How to attach the tabletop?

In order to secure the tabletop with your own hands, you can use different methods. So, you can purchase a ready-made folding table kit, or you can assemble the tabletop yourself. First of all, before installation it is necessary to take all measurements. You need to measure the width, height and length of the future folding table. After this, you can provide a convenient shelf in the tabletop before installation folding design. So, it needs to be secured with cotter pins.

The second option is installation with screws. To do this, you need to drill several holes for the screws, and only then screw them into the right places. You can cover these structural elements with special putty or glue, and then sand them last layer. Then you need to move on to fastening the structure. The front bar is secured under the lowest fastening part of the future table.

The plank will delimit the tabletop when folding, and will also make the structure more rigid and reliable. It is best to secure it with long screws or cotter pins.. Some people choose the corner mounting method. The finished table legs and base for the hinge must be tightened with 3 cm screws.

After this, you need to install a folding system, the role of which will be played by the staples. They will provide the ability to fold not only the table top, but also the legs. The staples must be the most rigid and of the highest quality in composition.

It would be better if such a mechanism includes a latch that prevents the independent folding and tilting of such a structure. Next you need to install three hinges on a medium-sized tabletop.

Two brackets need to be installed a little closer than from the edges of the proposed structure, and the third - in the middle. After this, you can tighten the beam - fastening using three-centimeter screws. After completing all this work, you can move on to the fasteners. It is important to correctly mark the required location for installing the future table. You should also measure the height of the leg so that nothing interferes with the structure during its operation.

When installing, it is important to initially draw the correct horizontal lines on the wall. It is best to use a level for this so that the table is perfectly level. First you need to install the mount with a leg. Moreover, it is better to hang it a couple of centimeters above the drawn horizontal line on the wall. After this, you need to secure it with dowels or reliable screws to the wall. Thus, the installation will be completed. All you have to do is check how well the folding table functions.

I bet that after reading the title of the article, many will say: “this doesn’t happen, it’s some kind of shelf.” I won’t argue, there’s no need, everyone has their own truth, but what I got, I hasten to present to your judgment.

A little background. After moving, when old apartment the workplace had to be dismantled, two laptops and a printer were temporarily placed on this one with one “wing” raised. But as you know, everything temporary - the most permanent, the arrangement of the workplace (and I work at home) took a little longer.

“This can’t continue like this, I have nowhere to put my legs (the design of the folding table is appropriate), so think and do what you want,” my wife said one fine day, and I had to turn on my imagination and sit down to sketches. But since the table was supposed to have no legs, the only right solution was to make it in the corner so that it would rest on two walls. At the same time, another snag arose: that same folding table, which is taken out only a few times a year, also needs to be placed somewhere in the “stowed position”. Therefore, I couldn’t think of anything better than putting it inside.

Sawing Considering the small number of parts and the fact that only the main canvas was large, I did not order a whole sheet. I drove up to the workshop and for a “small share” - for just over 700 rubles, the guys not only picked up from the leftovers Chipboard of the required me colors, but also cut it out.

There are nine parts in total:
main blade - 700x1100 mm, with two rounded edges (small, with a radius of 50 mm, so as not to break) and a cut for a T-shaped profile with three sides;
long stiffener rib – 150x1050 mm;
two short stiffening ribs (one was slightly beveled for convenience) - 150x600 mm;
two more vertical planks, 220x450, the corner of one of them is also cut off, 100x100 mm;
and three horizontal strips: for a printer – 400x400 mm, for a scanner – 300x500 mm and for another laptop or a stack of paper, 270x370 mm.

In addition, I had to buy more (I had a lot in stock):
T-shaped profile – 2.5 m.
wide plastic corners – 10 pcs. plus two narrow ones;
mugs-stickers - one sheet;
hidden canopies – 8 pcs;
paper edge – 10 m (half left)
about three dozen confirmees;
fifty screws 16 mm long;
dowels and powerful screws (anchor bolts can be used) for fastening the structure to the wall - 6 pcs;
and a dozen wooden dowels.

Also needed:
a drill-driver for assembly and an impact drill for hanging the table on the wall;
6, 8 mm, as well as confimat and pobedit drills;
hex and Phillips bits, as well as a magnetic extension for them;
awl, ruler, tape measure, pencil;
furniture glue: regular thick PVA was perfect;
iron, knife, felt and a block with sandpaper for gluing parts with an edge;
hammer and mallet.

That's all, you can start.

My least favorite part of assembling cabinetry is edging. But I can’t live without it, so I glue a piece of paper edge onto the part with a hot iron, pressing it well, rub it with a felt block,

I cut off the excess with a knife and, if necessary, go over it with sandpaper once.

And so on all sides, all the details.

But with the T-shaped profile, on the contrary, there is no hassle: I poured wood glue into the groove, and, tapping it lightly with a mallet, hammered it in. When dry, I cut off the excess with a sharp knife.

Now I’m starting to assemble: I fasten two vertical strips together

I screw in the brackets for the scanner and laptop (necessarily on both sides, they weigh a lot)

And one more for the printer on top.

Everything is confirmed: aesthetics are secondary here, reliability is the main thing.

I not only tighten the U-shaped stiffening rib along the bottom of the table with the same confirmations,

But I also reinforce it with wide plastic (4 holes for screws) corners.

In it, on both sides that will be adjacent to the walls, I not only make two holes with a 6 mm drill, but also reinforce them on both sides with canopies. Moreover, the narrowing, which is always directed upward when you hang shelves, in this design should look downward: this way the load is redistributed from the holes in the chipboard, the strength of which is questionable, to the entire part.

I mark the main fabric, with the T-shaped edge already dry, and drill holes for the dowels. Using an 8 mm drill, to a depth of 10...11 mm (a limiter will help you if you are not confident in the steadiness of your hand and the sharpness of your eyes), and using the same wood glue, I hammer them in. Also, to make it easier to assemble later, I make holes

I mark the counter holes in the rigidity profile, and drill them “with a reserve” in depth. First, I attach the central superstructure to the main fabric with confirmations, and then I attach the stiffener to it.

It seemed to me that the design was not reliable and holistic enough. Therefore, eight more wide corners along the contour with inside, pulled the stiffening rib to the canvas.

The structure is ready, all that remains is to pull it to the walls.

However, given the dimensions, and most importantly its weight, I was despondent: marking the holes in the canopy was not possible. Ingenuity helped: on the folding table, which was supposed to be pushed in and stored there, I put a piece (I had on hand) of 20 mm wooden slab, hoisted finished design, leveled and marked the holes.

• Furniture
  • I thought for a long time about how to make a table without legs, at the beginning there were options for ready-made chipboard sheets from Leroy, where they were cut, but they were all very thin and would sag. And I basically didn’t want to put the system unit on the floor because of the dust. And the finished countertops for the kitchen, although thick enough that you can sleep on them, are very narrow; the knees will rest against the wall. As a result, I had to make it to order furniture factory, surprisingly, it cost 5-7 thousand rubles with materials and sawn. I really had to buy a whole one chipboard sheet about 4 by 5 meters, since smaller ones are not sold and draw on a piece of paper approximate diagram, and leave the remains, as unnecessary, in the sawmill. The tabletop is attached to holders for the air conditioner from Leroy, after installation I realized that the table was moving a little and I had to buy additional corners there. If I did it now, I would add another long mount from the left wall. After fixing all this, my skill in using a hammer drill has improved quite a lot, and now I can tell by ear when my neighbors are pushing against the reinforcement.
  • Very convenient hidden shelves, on one there are headphones, on the second there is a UPS.
  • The cabinet at the bottom has disgusting default wheels, which had to be replaced with rubberized ones.
  • On the right is the wife's Lillhoyden, the wheels have also been replaced.
  • Hektar lamp
• Iron
  • The system unit was new 4 years ago and cost 30k rubles: i5-4670K + 2x4Gb + GTX 660 + 500Gb WD, later I bought an additional Samsung 860 SSD. The PCI Wi-Fi adapter TP-LINK TL-WN781ND is detected out of the box in many distributions, although it is a little outdated and can only operate at 2.4 GHz, but with its help, Ubuntu pulled up firewood from the Internet for the NETGEAR A6100 Wi-Fi adapter, which is already 5 times faster GHz.
  • A wonderful DELL E248WFP monitor that has survived two computers and one move.
  • External HDD Seagate Expansion Desktop Drive SRD00F2 2Tb.
  • The DELL WM514 mouse has been running on two batteries for a year now.
  • The Dell RT7D50 keyboard was disassembled and washed in a basin of soapy water. I can’t find anything better yet, most likely I’ll have to wash it again and buy stickers, since WASD is all worn out.
  • Sennheiser HD 215 II headphones that make your ears sweat in summer.
  • The CyberPower BS650E UPS under the table is used as a tee, I can’t even imagine what’s going on with the batteries.
  • Tyomin's rosette is quite convenient, there is enough power even for an external HDD.
• Net
  • Xiaomi Mi Wi-Fi Mini with Padavan firmware (XRMWRT), Ubuntu virtual machine was used to build the firmware. After breaking long links, asus and netgyrs, I decided that there was no particular point in a router more expensive than 2k. As a result, the stitched Xiaomi has been working without a single break for more than a year.
  • MFP - Brother DCP-7057R, there are even rpm and deb drivers, plugged into Xiaomi via USB, printing over the network.
• Laptops
  • Dell Vostro V130 with lubuntu 18.04 turned off about a month ago while surfing, and won't turn on anymore. I don't even know what to do with him.
  • My wife's Dell Inspiron 7737, we ran live Ubuntu on it to check the reasons for the dullness. The problems were in the hardware - I cleaned the dust and changed the thermal paste.
• Bonus
  • Guardian of the system unit -

Main problem small apartments- lack of square meters. Therefore, the most the best option For such housing is ergonomic furniture. The use of functional and small models in the kitchen is especially important, for example, a folding table with wall mounting will become great solution, which will save usable space without sacrificing comfort. When folded, it will not interfere with cooking or other manipulations in the room, and when unfolded, it will provide a standard place for lunch for the whole family. There are many models of such furniture on the market, so when choosing it, it is important to take into account many nuances.

A folding table with wall mounting is a tabletop fixed with a special triangular or rectangular fastener. When closed, this design looks like a small bar. When unfolded, it looks like a regular dining table extending from the wall.

This model of furniture would be quite appropriate in the kitchen or on the balcony. Wall mount tables are popular due to the following advantages:

1. Compactness. Such products, when folded, do not occupy a large area.
2. Functionality. When unfolded, wall-mounted folding tables perform all the functions of stationary products.
3. Stylish appearance. The models fit organically into almost any interior.
4. Ease of installation. Folding tables with wall mounting are delivered to the buyer already in finished form With complete instructions. The owner can only fix the product on vertical surface, which does not require special skills.

The transforming table is more relevant for kitchen area, in which it is not possible to install stationary models, since it folds and saves usable space. You can install a folding table in the kitchen on any part of the wall; the main requirement is that nothing prevents the product from folding and unfolding freely.

Transformable furniture will not hold tightly to plasterboard structures.

Compactness

Functionality

Stylish appearance

Ease of installation

Popular varieties

Today, folding tables come in a wide variety of designs, models, shapes and sizes. They all differ in configuration, purpose, style decision. Among the most popular models are:

1. Classic folding wall table. Multifunctional model, which can be mounted on any vertical surface of a wall or cabinet. This product can withstand increased loads, so it is quite suitable for use as a workplace. If the furniture is equipped with a massive tabletop, the support should be spacers or at least several legs. Such products can be used as a balcony or desk, for installing a computer, organizing a workplace for schoolchildren.
2. Tables with a folding tabletop and an additional cabinet, inside of which dishes, food or other necessary small items can be stored. One of the disadvantages of the model is that such a kitchen table will not be able to withstand heavy loads.
3. Wall table without legs. This is very compact furniture which will save maximum space. Externally, the design looks like a shelf with small dimensions.
4. Table transformer. The most functional model, divided into wall-mounted and wall-mounted types. Most often, such designs are used as a kitchen table. The product is easy to fold, allowing you to turn it into a more compact work surface. The range also includes adjustable models with additional functions. For the little ones premises will suit a wall-mounted table without supports, which is attached only with special brackets to a vertical surface. On sale you can also find a folding version with one leg.
5. Mobile folding model. It is chosen if it is not possible to fix the product on the wall surface. Such a wall-mounted table can be moved along guides that are located on a vertical surface. This option is perfect for non-standard layouts. As a rule, wall-mounted kitchen tables are equipped with additional supports for stability when stationary.
6. Folding bar counter. This model looks like a long narrow tabletop that is attached to the wall. Stands are made from glass, mirrors, plastic, more dense materials. This product can be built into a long narrow kitchen.
7. Folding table - the most simple model. It differs from a transforming product in the absence of additional functions.

Classical

With folding tabletop and additional cabinet

Wall table without legs

Folding table

Bar counter

Transformer

Mobile folding table

When choosing a model of a folding table for the wall, it is important to correctly determine its dimensions. You should focus on the parameters in the unfolded state, when the tabletops recline. It is important to take into account the dimensions of the room, as well as the number of people who should be accommodated at the wall-mounted folding table.

Standard transformable products reach a height of 70–75 cm, this distance is comfortable for those sitting.

For working area The following dimensions are suitable: length - 1.2 m, width - 0.8 m. It is advisable to adhere to these dimensions if the product will be used as a working or writing place.

For dining table standards change:

1. Standard stationary products round shape suitable for 4–6 people. They can reach from 110 to 135 cm in diameter. Owners of a folding model must take into account that the edge with which the product is attached to the wall does not have a functional load. Therefore, when calculating seats the number of people should be reduced by 2.
2. The oval shape can be fixed on the wall lengthwise or crosswise. The number of landing spots will depend on the type of fastening.
3. The rectangular shape of the table is similar to the oval one, and the number of seats depends on the mounting method.

There are parameters that determine the size of a table that is comfortable for a person - 60 and 40 cm in length and depth, respectively. But the dimensions of oval and rectangular folding models often exceed these figures several times.

Round

Oval

Rectangular

Materials

In addition to the dimensions, the material from which the table is made is important. Most often for the manufacture of such furniture they use:

1. Plywood. Popular due to its environmental friendliness and low cost. Sheets are obtained by gluing 3 or more layers of veneer with urea resin. It can be used both in its natural form and after painting or veneering.
2. Chipboard is the cheapest option; it is a board made of wood particles (sawdust, shavings) glued together with formaldehyde resin. It is easy to process; with the help of veneering and lamination, different textures of the material can be achieved.
3. MDF is a board produced by dry pressing of tiny wood chips under the influence of high temperatures and pressure. Urea resins and modified melamine are used for gluing. When facing, dowels, plastic, and film are used.

The optimal material thickness for making folding tables is 19–23 mm. Brackets are most often used as a lifting mechanism, which are attached to the wall with dowels. Accessories required furniture hinges and self-tapping screws. The tools you need to prepare are a screwdriver and a drill.

Plywood

Chipboard

MDF

Necessary materials and tools

Drawing selection

Before you make a folding table with your own hands, you should choose a folding mechanism. Then you need to draw a diagram of the product. When starting to make a folding table, it is important to create the drawings correctly. Of course, you can try to do them yourself, but it takes a lot of time and the likelihood of error is quite high. Therefore it makes sense to find finished drawing on thematic resources and adapt it to the desired size. For this purpose, many sites offer special calculators.

For details you need:

1. First, transfer the drawing in detail onto thick paper.
2. Draw a sketch on plywood. For measurements you should use a ruler, square, level.

Once the image has been completely transferred, you can begin cutting out parts from the plywood sheet. For this purpose, special equipment will be required. If there is none, you can contact specialists. After sawing, you should treat the edges of the plywood around the perimeter with glue, this will help avoid shedding and destruction of the sheet.

If the material is purchased in hardware store, as a standard, you can also order sheet cutting to your own dimensions.

Step-by-step master class on self-production

Wanting to save money, many people make a table with their own hands. This is not difficult, but requires compliance with certain requirements.

Wall mounted kitchen wall mounted

To make a folding table with your own hands, you will need to prepare plywood sheets, you can also take chipboard or MDF as a basis. Additionally, you will need screws, hinges, confirmations and anchors.

Manufacturing algorithm:

1. Prepare a drawing of the model and parts separately. Moreover, it is necessary to draw a diagram according exact dimensions future product.
2. To make a tabletop using electric jigsaw saw the selected material, giving it the required form.
3. By using grinder process the edges of the product and cover them with special tape.
4. Prepare supports. It could be a triangle or support element in the shape of the letter P. For a small wall-mounted tabletop, a triangular-shaped support is most suitable. It is secured with a bracket on the wall and hinges to the tabletop. Using two strips on both sides, the structure can be strengthened.
5. Attach the triangular support to the back.
6. Mount the structure to the tabletop using hinges.
7. Attach the wall table itself.

A suitable place to install a wall-mounted folding table is the wall next to the window sill.

Cut the material into the desired shape, process the edges of the product and cover it with special tape.

Prepare supports

Paint the parts, attach the triangular support to the back, mount the structure to the tabletop

Attach a wall table

Desk folding with cabinet

You need to prepare:

• sheet material for assembling the cabinet box, the thickness of which is at least 16 mm;
• a block for fixing the structure to the wall;
• chipboard or MDF sheets for countertops;
• strip for mounting the product on the wall;
• wooden beams for making supports.

In addition, you will need screws, furniture corners, and a bracket. The manufacturing process itself differs little from assembling a regular wall table, because the cabinet is a box without a back wall:

1. The parts are fastened with self-tapping screws and reinforced with metal furniture corners. If desired, shelves and partitions can be secured inside the cabinet using corners.
2. The tabletop is cut to the size of the previously made box. The edges are processed and secured to the bottom crossbar of the cabinet using brackets.
3. Assemble a U-shaped support from the beams and fix it with loops to the tabletop.
4. They make fasteners that will hold the tabletop in the assembled state. The table is ready.

Installing such a model does not require a lot of time and effort; the main thing is to choose the right place so that nothing interferes with the product from unfolding and folding.

The built-in wardrobe can be replaced with a regular shelving unit.

Fasten the parts with self-tapping screws and reinforce with metal furniture corners

Cut the tabletop to the size of the box, trim the edges and secure it to the cabinet crossbar

Assemble the support and attach it to the tabletop

Make fasteners and install the structure on the wall

If desired, attach shelves inside the cabinet

Decorating ideas

The folding surface may well serve as an additional decorative element. Ideas for decorating such furniture:

1. On reverse side table tops can be painted, complemented with a painting or panel - when assembled it will be stylish decor premises.
2. A creative solution would be to add a mirror to such a table. On reverse side In such cases, the countertops are secured with a mirror surface (the support legs, when folded, act as a frame).
3. In addition, the back of the tabletop can be turned into a board for chalk or marker. To do this, an appropriate coating is attached to it. Such a surface will be a godsend for creative people, allowing you to conveniently take notes, it is also suitable for children's games.

By showing your imagination, you can easily get from a folding table multifunctional item interior The reverse side of the tabletop can be decorated with an author’s photo or image pet or draw your own unique masterpiece there. The main thing is that the homeowners like the decoration.

Making a folding table for the kitchen or living room does not require much time, even a beginner can install the product. However, the final result cannot but rejoice - the product saves space, has stylish look and convenient to use. A kitchen table of this type can protrude work surface for preparing or directly eating food. Folding tables - optimal solution for small apartments, loggias, kitchens and other small spaces.