Decorative painting walls - one of the popular types of decoration. It is very diverse, individual, and with its help you can create a unique, beautiful room that will have no analogues. Nowadays, this type of wall decoration, such as decorative painting, has become a strong competitor to conventional wallpaper.

Dyes for wall decoration, as a type of finishing material, are characterized by many advantages:

• The service life of painted coatings is several times higher than that of wallpaper or plaster.
• There are no joints on the painted surface, resulting in a perfect continuous picture.
• Huge assortment of different color range and effects.
• Moisture-resistant properties help make walls unique even in the kitchen and bathroom.
• In case of repainting, there is no need to clean the existing paint layer.
• The use of water-based paint when decorating guarantees an environmentally friendly surface that does not emit toxic substances and does not cause allergies, is ideal solution finishing a children's bedroom.
• Regardless of the base surface (be it concrete, drywall, plaster), it fits equally well on the wall.

Decorative painting of walls has only one requirement for the coating - it must be even.

Painting tools

Apart from the paint itself, painting walls in an apartment is done using the following tools:

• roller;
• spatulas (metal, plastic, toothed, rubber);
• sponges;
• hard brush;
• sandpaper;
• stencil (for the effect of a pattern on a painted wall).

Before you start decorating the walls, you need to decide what decorative effect I want to get it so as not to buy an extra tool. Although the price of rollers and brushes is low, you can use them more than once.

Preparing the walls

If decorating a wall with paint is being done for the first time, you need to prepare the surface for this. design solution. Preparing walls for primary painting is carried out in stages:

1. Cleaning the coating from old finishes.
2. Surface priming.
3. Inspection for flaws, which are repaired if necessary.
4. Uneven surfaces are puttied and sanded.
5. Re-priming.

After all the work done, the wall is ready for decorative painting.

To ensure that the paint lies evenly on the walls and there are no defects on the coating, you need to wait completely dry putty mixture and primer on the wall.

Types of wall decoration with paint

Due to the fact that decorative paint is too expensive, an alternative is in demand among construction professionals - artistic painting of walls with ordinary cheap paint. There are several varieties to create a unique room using ordinary paints. Let's take a closer look at them.

This is the name for painting walls with decorative paint, which creates the effect of an old, shabby surface. To create such a masterpiece you need:

1. Cover the surface with the chosen color.
2. Apply acrylic painting to create a shade contrast.
3. Apply colored glaze to the surface in combination with the shade of the painted wall, smooth it evenly over the surface with a wide brush, and when all surfaces are covered with glaze, touch the uncured paint with the same brush.
4. A round paint brush should be poked in a chaotic manner over the surface, thus making the walls look antique.

There is only one drawback to this method of application: all irregularities and bulges become more noticeable.

This decorative coloring is a great idea for decorating an office; it gives the impression that the walls are covered in leather. After preparing the surface, you need to start finishing:

1. We cover the walls with latex paint of our favorite color.
2. Making a suede tassel.
3. Mix the glaze with latex paint, slightly darker than the tone of the surface.
4. We cover a piece of the surface with the mixture, moisten a suede brush in water and squeeze it out, lightly touch it over the not-dried coating, making streaks and partially removing it.
5. We blot the existing noticeable lines with a piece of wet suede to give a natural leather finish.

Venetian plaster effect

One of the most beautiful and decorative ways painting walls. To recreate the Venetian effect, you need to perform next steps works:

1. Place in a wide container latex paint. Sprinkle a little pigment for paint on one side, carefully stir half with a stick so that the dark and light sides come out in the container.
2. We take a lighter paint on a spatula and apply it to the coating like regular plaster.
3. Dip the spatula in dark color and cover a piece of the wall.
4. When light and dark spots appear on the wall, we begin to move the spatula along the wall in different sides to spread the colors evenly for a harmonious look.

At the finishing stage, Venetian plaster is sanded with fine sandpaper and rubbed with a special wax composition.

To create the “Venetian plaster” effect, you must use only a plastic spatula during the work process.

Wrinkled skin effect

This effect is easy to create, but requires patience, because everything is done slowly, gradually.

1. Take a piece of paper and paint a piece of the wall according to its size.
2. We crumple the sheet, apply it to the surface, begin to smooth it, while creating the outline of a crumpled coating.

The entire wall is gradually processed in small pieces.

In the video: the effect of wrinkled (worn) leather on the wall.

For decorative painting of walls, you can use not only purchased tools, but also improvised means. A simple rag roller creates an interesting indoor effect that is suitable for children's rooms. In case of use this method The surface preparation may not be ideal, because this type of finish hides all the imperfections on the wall.

Roller painting steps:

1. Apply the first layer of paint and wait for it to dry.
2. Dilute another shade of the base color (slightly darker than the previous one).
3. We soak a rag in paint, twist it to make a tourniquet, and wrap it around the roller.
4. We paint from the very top of the wall to the bottom in different directions to obtain a textured pattern.

Types of paints

Decorating walls with special dyes for wall decoration is a variety of materials. They have many color tones and look beautiful. Types of decorative paint differ in properties based on their composition.

According to the components of the paint composition, they are divided into:

• acrylic;
• latex;
• water-based;
• alkyd and oil.

Acrylic paints

They are most often used for painting walls in an apartment. They are popular due to their price-quality ratio. They have the following properties:

• fireproof;
• make walls strong and durable;
• resistant to temperature changes;
• dry quickly, create protective film on the walls;
• adheres well to the coating;
• environmentally friendly;
• have an assortment of more than a thousand.

Latex paints

• no pungent odor;
• high degree of fire safety;
• the paint does not react to sudden changes in air temperature;
• possible dilution with plain water;
• dries quickly after application;
• abrasion resistance;
• environmental Safety.

In addition to positive qualities, there are also negative ones. The color range of this type of paint does not have bright colors, and under the resulting film, good conditions for living biological organisms. Before using latex dye, the surface must be well primed.

Water-based paints

They are in demand for painting rooms without creating an interior, their price is low, and they cope with the direct purpose of painting surfaces. The advantages of water emulsion include:

• low cost of material on the construction market;
• low consumption during application;
• harmless to health;
• have good permeability to moisture.

Among the disadvantages of water-based coating, experts highlight the speed of washability from the coating, as well as the need for a certain temperature in the room during painting.

Alkyd and oil paints

Alkyd and oil-based dyes are characterized by a rich color finish and a durable layer. Positive qualities These types of finishes are:

• rich beautiful colors;
• very durable layer when dry;
• long service life.

Negative qualities are also present: there is a very strong smell during painting, high consumption material, high cost, small range of colors.

Many people, in order to save money, want to paint the walls with their own hands, without the help of professionals. But how to apply decorative paint on one's own? There are some recommendations from experts regarding the application of decorative paints to walls:

1. Before painting the surface, it must be primed to avoid mold.
2. Prepare the room by covering the floor with protective film.
3. Stir the paint well after opening it.
4. When using a brush, apply horizontal stripes, and then smear them vertically.
5. If you use a roller, you need to roll it over the tray with the material, then from top to bottom, then cover the walls with paint, pressing the tool well (for a uniform color).

In order for the coating to be evenly colored, you must first apply a layer with a brush, and then go over the painted surface with a roller. If desired, you can use a variety of decorative painting methods.

Decorative painting of walls with your own hands is a very real task. The main thing is to follow the instructions for use of the material along with recommendations for application.

Learning to decoratively paint surfaces (2 videos)

Various decorative painting effects (28 photos)

Wall decoration with decorative plaster is becoming increasingly popular. Applying such material and painting it is not so easy, especially since there are several varieties. Therefore, it is worth considering in more detail the intricacies of the painting process. decorative plaster.

Peculiarities

Ordinary plaster on a cement or gypsum basis is intended only for partial leveling of walls. After its application, the surface is completely leveled using finishing putty and then painted, covered with wallpaper or other finishing material.

Decorative putty is different in that it already forms a ready-made beautiful pattern or three-dimensional texture.

Despite this, it is often necessary to paint it, for example, to create a unified color scheme in the interior.

The advantages of using decorative plaster in a special aesthetics and originality of the interior. Its different types, with unique patterns, are used to decorate and decorate walls in shopping centers and office premises, various institutions and even in entrances.

In an apartment, you can use it to line the walls in the hallway, part of the living room or bedroom, and for the kitchen or bathroom you can use special grades that are protected from moisture, steam and fungus.

Decorative plaster is made from mineral or polymer components. Mineral can be based on cement or gypsum; for the latter, slaked lime is used as a binder.

Polymer There are vinyl, acrylic and silicone. Any type may contain crushed solid components of various substances: crushed stone, pebbles, marble, granite and others. It is they that, when applied, form intricate patterns; for example, the widely popular “Bark Beetle” has this property.

All types of decorative plaster are sold in the form of dry mixtures, which are diluted with water in a certain proportion and then applied to the walls. Application technologies are different; you can use a spatula, brush, rubber comb or even the palms of your hands.

Types of plaster

Decorative plaster, depending on the characteristics of the pattern, comes in two types:

• textured, which after application gives a three-dimensional pattern on the wall;
• Venetian or textured plaster, which has finished form smooth surface with imitation of artificial stone.

Since Venetian plaster itself, after application, has intricate patterns with different shades and tints, it is not painted. And here textured types need painting.

There are several types of three-dimensional patterns of textured plaster:

• "Bark beetle" has small longitudinal grooves, resulting from the hard pebbles in the composition. In appearance, it resembles a tree eaten away by insects, which is why it got its name.
• "Lamb" The texture is filled with small grains, the surface is fine-grained and rough to the touch.
• "Fur coat" It turns out with a rough surface and fine pile.

• "Martianidae" has a complex three-dimensional pattern with spots of various sizes.
• Volumetric texture “American” granular interspersed with even spots of different shapes and sizes.

Decorative plasters for mineral based They are well suited for finishing walls in an apartment; they are strong and durable. And here It is better not to use them for street work, since they are afraid of moisture, temperature changes, and sunlight.

Silicone and acrylic types can be used for both interior and exterior use.

Vinyl plaster based on polyvinyl chloride, protected from dampness, ultraviolet radiation, fungi and mold, can be successfully used in the bathroom, kitchen, living rooms oh and on the street. Its only drawback is its high airtightness, due to which the walls in the apartment “do not breathe.”

Paint selection

In terms of their composition, organic paints intended for decorative plaster can be acrylic, silicate and silicone. The first ones are made from acrylic polymer resins, have a drying time of 5 to 30 hours, the surface becomes matte after use.

Acrylic types of paint for plaster are odorless and retain their rich color for a long time.

Silicate dyes based on silicon organic resins and metal pigments form a viscous, durable film on the surface that is resistant to moisture and temperature changes. Silicone paints are water-dispersed, safe to use, and have long-lasting, rich shades.

Paint for decorative plaster can be made and mineral based. These varieties are designed for finishing concrete or brick surfaces.

Despite affordable price and a large variety of colors, mineral water-based paints have a shorter service life, than organic ones, are less protected from adverse effects. They are often used to perform Finishing work for plastering indoors and outdoors.

Oil enamel, used for painting textured plaster, is made from quartz sand, oxides various metals, polymer and mineral pigments, giving the material a different palette of colors.

After painting, a durable opaque film is formed, most often with a characteristic shine.

Flaw oil paints and enamels in strong smell, which can remain after work for a long time, even when completely dry.

Alkyd paints, like oil ones, have a sharp bad smell. Most often they work with them wearing a respirator.. Despite this drawback, they dry out faster than oil types, do not form smudges, are resistant to mechanical damage and moisture.

Coatings made from these dyes can be safely washed; they are quite popular for interior work.

Experienced craftsmen They admit that the consumption of this species is less than that of others.

When choosing paint for decorative plaster, you must first take into account what type of work it is - façade or interior. Water-based acrylic, silicate and silicone types are perfect for decorating facades.

They will withstand bad weather well, are resistant to moisture and, importantly, vapor permeable.

There are a huge number of shades on sale - several hundred colors, there is a choice to suit any exterior. These paints are used for various textures of plaster: “Bark Beetle”, “Lamb”, “American”.

For interior work, acrylic, latex, and mineral water-based paints are most often used.. You can also use oil or alkyd options, but they often cause inconvenience in work and you have to frequently ventilate the room. But these paints provide a durable and bright film with intense shine.

Also, when choosing paint, you should consider its consumption.

On a rough surface the norm is one layer for various types the following:

• Oil enamel– 1 liter per 10 – 15 sq. m;
• Acrylic– 1 liter per 8 – 10 sq. m;
• Water-based– 1 liter per 10 – 18 sq. m.

However, this consumption may vary depending on the degree of unevenness; rougher textures of plaster absorb more.

Painting methods

You can paint decorative plaster yourself without any problems, both indoors and outdoors. Work begins with surface preparation. If the walls have been recently plastered, you need to wait until they are completely dry, then clean them of dust and construction debris.

It is not recommended to wash decorative plaster with a rag or sponge; an industrial or household vacuum cleaner is best for cleaning.

• Firstly, it gives better adhesion to the surface, the layers will not peel off.
• Secondly, the primer solution is able to close small pores in decorative texture plaster, paint will not get there, therefore, its consumption will decrease.
• Thirdly, the primer will strengthen the structure of the plaster itself, it will remain intact longer.

It is best to choose acrylic or polymer varieties deep penetration depending on the location - for external or internal work.

The paint is applied with a roller or brush. It's better to use a roller as it grabs large area and distributes the composition over the surface as evenly as possible. For it you need to take a special bath, where you periodically dip it. Painting proceeds in one motion from bottom to top. A brush is needed to paint edges, small areas, hard to reach places, where you can’t reach it with a roller.

Textured plaster is usually painted in at least 2 – 3 layers, less is not enough for full coverage. Therefore, paint consumption increases. Some people dilute it with water, but the lower the concentration, the more layers will have to be applied.

Several interesting methods are used for painting decorative plaster. They all give their own unique effect.

Painting one color is the easiest way. It is done with a wide terry roller using vertical movements, and stains are removed with it. Each previous layer covers a new one.

It is necessary to paint until all irregularities are filled with a uniform color.. This method has found application in facade work.

Painting in two colors begins with a regular roller until completely painted in one base shade. After drying, you need to take a sponge or foam roller and dip it in paint with a second color so that it lies thin layer on a surface. Then, with a sponge, carefully go over the protruding areas of the relief surface so that only they are painted, and the indentations retain the base color.

Possibility of painting textured walls with effect Venetian plaster. Base layer performed using the usual one-color coating method. The second shade is taken with a metallic sheen, for example, based on silver or aluminum powder.

You can use different colors: gold, silver, bronze.

Today, having studied the technology of applying a structural base and knowing how to paint decorative plaster, you can quickly and effectively decorate any living space: the living room and hallway, dining room and kitchen. Moreover, modern manufacturers offer big choice ready-made solutions and dry compositions, from which anyone, even an unprepared person, can create stylish decor with excellent performance characteristics.

Wall decoration with decorative plaster is currently in great demand among city apartment owners, country dachas and cottages, due to its practicality, aesthetic appeal and durability. By doing repair work This type of room decoration does not require complex, expensive preparation, multi-stage alignment of walls and partitions.

Features of plaster painting

Tinting of the relief surface of the plaster is carried out after completion of all preparatory and general repair work, which allows consumers to select the color, dullness or shine as accurately as possible. The main thing is to familiarize yourself with the rules for applying paint in advance, choose quality materials and tools. Surface painting can be done not only during repair work, but also to update the interior after some period. In addition, during operation, knowing how to paint decorative plaster, you can quickly and easily change the design of the surrounding space yourself, giving the wall surface a new, original look.

Preparatory work

The color scheme for painting walls, partitions and other surfaces is selected from a huge variety of shades and tones, which allows you to diversify and decorate the interior as much as possible. Interior and facade paints made on an organic basis: acrylic, silicone and silicate. In order to determine the volume of decorative plaster required, you should first measure the room, taking into account the sizes of window and doorways. The manufacturer usually indicates the paint consumption on the packaging. It also usually explains the technology for diluting paint with water and indicates the recommended primer for surface preparation.

An additional 10% of material should be added to the calculated volume for various unforeseen events.

By the way, experts recommend immediately tinting the paint when purchasing it in a store using special machines and color inserts. The fact is that if the material turns out to be insufficient or in the future something needs to be corrected, repainted or repainted, then you can always buy paint of the required color by number.

In addition, before painting decorative plaster, you should select the following high-quality tools:

• roller;
• special tray for paint and roller dipping;
• wide and narrow brush;
• textured mitten;
• masking tape for gluing joints;
• film for covering furniture and floors.

Technology of painting decorative plaster

Before applying paint, you should carefully treat the surface of the walls with a pre-selected primer, which should correspond in its properties to the operational characteristics of the room. The base should be primed in accordance with the manufacturer’s technology and be sure to adhere to the exact time specified in the instructions. While the surface is drying, decorative plaster should be prepared and diluted in accordance with the chosen technology and the manufacturer’s recommendations. Often, two or three tones are used for structural coatings to emphasize the volume of texture and textural stains.

Each layer must be allowed to completely set and dry.

When carrying out work, two methods can be used: washes or dry brushes. Applying plaster with a wash more clearly emphasizes the depressions and all the features of the relief of the walls, and working with a dry brush emphasizes the unevenness more. In any case, the background color is initially applied in two or three layers. To do this, it is recommended to apply the paint using a special roller that has long pile. However, you need to ensure that a thick layer of decorative plaster does not hide the small structure of the coating.

To highlight the relief, it is better to use contrasting, more bright hues, and to emphasize the wash and texture, on the contrary, select darker shades.

In conclusion, experts recommend covering the painted textured surface special varnish or protective wax. This reception will provide a more rich and bright color, shine or noble matte finish. Usually, protective covering applied to the paint in several layers in pure form after adding a small amount of water. Additionally in finishing layer you can enter special mother-of-pearl, silver or golden tones, which will look impressive in directional lighting.

Video

The video shows a master class on applying Versagele decorative plaster.

This video shows the process of painting bark beetle plaster.

Painting decorative plaster is final stage surface finishing. As a result, the overall impression of the building and its appearance depend on how well the work is done.

This stage is extremely important, so we will completely devote this material to painting technologies.

So, why paint plaster?

• Firstly, as we said above, coloring will allow you to create a unique design image for your interior or facade. The choice of color directly depends on your imagination and your sense of beauty.
• Secondly, and importantly, facade paint provides...
• In addition, light facade paint prevents excessive heating of the building walls on a hot summer day, which will allow you to save a little on air conditioning.

As you can see, coloring, in addition to purely design advantages, has very practical functions. Competent and high-quality painting will do this obvious advantages monolithic plaster even more vibrant.

White and colored mixtures

When starting work, you will inevitably be faced with the question of which decorative mixture to choose: white (suitable for further painting) or colored (including a tinting component).

Indeed, in addition to the actual painting, it is possible to immediately apply a colored composition to the wall. To do this, add color to the mixture and mix thoroughly.

Note! The tinting component should be chosen in the same place where you purchase the base. Please also take into account the fact that after drying the color will become a shade lighter.

Plaster, tinted in mass

After the composition has been tinted, .

However, some types of decorative mixture do not require coloring in the mass.

Therefore, after applying them, it is necessary to paint. For painting, various interior or facade paints are used, which are applied directly to the white base.

In addition to painting the white surface, it is possible to tint individual areas. This combination can give a very interesting design effect.

Dyeing technique

Now that we have understood the types of decorative plaster, it’s time to answer the question - how to paint decorative plaster?

Classic dyeing method

Color:

• Any painting work can only begin. To do this, after completing the formation decorative relief on the surface you need to wait from 8 to 48 hours. The time until complete drying depends on the composition of the mixture.
• If the surface tends to crumble or peel (sometimes cement-based mixtures suffer from this), to strengthen the surface, treat the wall with a colorless primer.
• After the primer has dried, we proceed directly to painting.

In order for the painting to be not only successful, but also with minimal inconvenience, it is necessary to acquire several devices that will greatly facilitate our painting work.

When starting to paint the interior, we cover the floor, furniture, windows and door slopes with covering material. Such precautions are not necessary, but windows and the path near the wall should still be protected from paint drops.

Today, people are increasingly striving to furnish their homes in an original way, avoiding platitudes and cliches. In this sense decorative painting walls - enough interesting solution: manages to create incredible textures, artistic images and color combinations. The shops are replete with goods for every taste. Therefore, without much hassle, you can decorate your interior stylishly, even without professional design training.

Needs to be cleaned work surface. Often marks remain on the walls old paint, whitewashing, wallpaper glue. They all have different chemical composition, substances interact with each other differently, and if you still want to repaint the walls, this may negatively affect the final result.

Preparing the surface for painting

In some cases, previously pasted wallpaper cannot be removed from the wall - then it is advisable to use alkyd primer paint. It is recommended to dilute it with white alcohol in a ratio of 1 to 3, mix thoroughly, and apply to problematic areas of the walls.

Another important point concerns the removal of dirt, oil and grease stains, fungus (fungal damage is typical for premises in old buildings, as well as in high humidity). Treat oil stains with acetone or pure gasoline. Just apply a little onto a dry, lint-free cloth and wipe the areas where you see grease-containing dirt.

Examine the wall for old cracks. Most likely, they will also be found. Prime the cracks with as dense a substance as possible, preferably finely dispersed and with high adhesion. The most common materials are cement or gypsum, or a mixture of both. Apply the solution by first moistening the cracked areas with water (this way you will maximize the adhesion of the “native” material old wall and primers).

Which paint to choose

It’s useful to start choosing paint long before you get into the process. It is not very wise to grab the first thing that comes to hand from the store counter at the very last moment. In addition, you definitely need to try the properties of the purchased paint somewhere in a separate place.

What is it for:

• see how it dries (does it leave cracks, quickly or slowly, does it change its original color);
• find out whether the paint will emit a pungent odor (sometimes manufacturers write that the paint is neutral, but in reality it turns out that the paint contains sharp-smelling fractions - this is unacceptable for living rooms);
• make sure that the paint consumption corresponds to that indicated on the packaging (this value is very arbitrary, because you can never determine with absolute accuracy how thick a layer you are applying and how much substance will be used per unit square area).

Attention! When buying a product in a store, do not forget to look at the manufacturing and expiration dates so as not to buy expired paint with changed characteristics.

It should be noted that decoration through painting can be done in two ways:

• using special textured paint (the option is more expensive, since such paint has a high price, although it is worth it!);
• using regular wall paint, but combining different colors (in the form of stencils, patterns).

The consistency of wall paints is quite liquid. When applied, no lumps, grooves or sagging remain. Painting is usually carried out in several layers. The exception is the use of a spray bottle. With its help, it is possible to evenly paint every centimeter, but in most cases it is necessary to handmade. A brush and roller are your tools.

Attention! Apply paint only to a completely dry surface - after all cleaning, priming, etc. Otherwise, you will be left with imperfections after the new paint dries.

Maintain uniformity in the speed and amount of paint applied. Start with those sections of the wall where you plan to place wall furniture in the future, hang a panel or a carpet, where there is minimal illumination.

This is necessary so that possible defects are not as noticeable as in the most central places. Apply each subsequent layer after the previous one has completely dried.

Attention! Apply the very last, final layer in the direction of the light rays falling on the surface.

Decoration

Buy stencils at the store or make your own. Suitable material:

• thin sheet plastic;
• a piece of thin linoleum;
• thick oilcloth, etc.

The point is that the shape does not collapse after several movements with a roller or brush. If this is not taken care of in advance, the edges of the form will become uneven and the applied design will have blurry outlines.

Stardust effect

A simple and at the same time interesting design technique: “speckles” of paint of a different color are applied to the dried surface. To do this, you need to take a rough brush with hard bristles, dip it in the paint, squeeze it thoroughly, and only then “spray” it in the right place: bend the bristles in the opposite direction, and then release it. Practice somewhere else beforehand to get the quality you need.

The decoration turns out to be very original when you paint the walls in a single color, but in different colour- individual areas or different walls the same room. Perhaps these will be large rhombuses or squares, stripes, circles, stains. Draw a design on paper in advance and act based on the picture.

Aging effect

Another name is stippling. Apply a glaze of a contrasting color to a plain surface. Use a wide flat brush for this. Without waiting for it all to dry, touch the surface repeatedly with the same coarse brush (or take a coarse brush round shape). Spread the “touches” either completely over the entire surface or zonally. As a result, an original texture is formed, and traces of brush marks will not be visible.

Attention! The same can be done not with a brush, but with a rough, dry sponge. The main thing is that mechanical intervention is performed in a certain way given style(the same nature of touches, their more or less uniform frequency).

Chaos pattern effect or abstraction

Make a simple roller coated with “torn” material. It will help you apply fine wall paint so that random shapes appear on the walls. Naturally, the applied layer should differ in color from the main one.

Video - Applying an abstract pattern with a torn roller

You will need:

• acrylic primer;
• vinyl paint in two shades;
• pearlescent azure;
• decorative paper.

The procedure is priming and painting, applying paper and crumpling it, painting again, removing excess paint from the folds of the “skin”.

Video - Decorative painting of walls with a wrinkled leather effect

Applying textured paint

By characteristics textured paint very close to textured plaster. But the paint is thinner, and therefore more flexible. Its use gives a stunning effect - exquisite surfaces that will delight the eye with exclusive decor for a long time.

What gives rise to the relief:

You can further refine the coating as follows. After it has dried, apply regular paint of a contrasting shade to the base layer with a soft brush, not everywhere, but in places - you will get an original, chic decor. Some craftsmen even use not one, but two or three contrasting colors, applying them in a special cascading manner. If you want the same thing, be sure to train in advance, because without skill it’s unlikely to succeed.

Advantages of textured paints

Industry of modern finishing materials provides the widest field for bold experimentation. You are not limited in anything, and you do not need to undergo special training or acquire any specific skills. A relief paint application and experimental courage in artistic painting are enough.

Although textured paints are more expensive than regular “smooth” ones, they have a number of undeniable advantages:

Such a wonderful product is ready for use, and even the most untrained decorator can work with it.