Many people are accustomed to thinking that plastic doors are intended to be installed exclusively in non-residential premises: in offices, schools, medical institutions. Most consumers also have the impression that this type of door can be used either as an entrance or balcony when combined with a regular double-glazed window. However, recently, interior plastic doors have become popular and in demand, which can be installed in any residential premises without harm to health and with maximum aesthetic comfort.

What it is?

Interior doors made of plastic are an excellent solution when the buyer especially values ​​the practicality, durability of the product and minimal maintenance. There are a lot of prejudices against installing plastic in residential premises: people assume the possibility that plastic doors could be installed as entrance doors, or, at best, perform the usual functions of balcony doors. Due to deep-rooted stereotypes, the imagination of most potential buyers who have not encountered the latest technologies production, immediately draws glass door, made of white metal-plastic, and nothing more.

However, thanks to the fact that modern production behind last years has made significant progress; there have long been developments of plastic structures of various types, intended exclusively for installation in residential premises.

In appearance they are almost no different from wooden doors or more familiar products made from particle boards and their analogues. As for their environmental safety, if the manufacturing company is fully responsible for the quality of its product, such doors always have certificates. This means that the material has successfully passed safety tests and is completely ready for installation in a house or apartment.

In order to finally dispel the remnants of prejudice, it will also be important to know that the PVC from which plastic doors are made is initially subject to repeated recycling in order to remove all possible chemical substances which can cause harm to the human body. During the processing process, the material acquires durable high-tech characteristics, and the door itself does not look cheap and ordinary.

The color of such doors has long been not only white with a glossy tint, you can choose any color that will ideally fit into the structure of the existing renovation and interior, or if you are just planning to renovate a house or apartment, you can decide in advance on the general tone of the room and select the color of the doors depending on the decision made.

If you look back at those harsh times when replacing doors in a residential area was a whole problem, now everything can be solved quickly, efficiently, and economically - plastic doors are much cheaper than their wooden counterparts and are sold everywhere. There is always the opportunity to order a set of doors from good manufacturer, and competent specialists will help you choose color, design and fittings.

Advantages and disadvantages

The scope of application of interior plastic doors is very wide. Due to the fact that, unlike wooden ones, they do not have the ability to accumulate harmful microorganisms, improved plastic is perfect for use in restaurants, canteens, and medical institutions. Such doors will look no worse in any room of a residential building: as already mentioned, the varied design allows them to skillfully disguise themselves as wooden products without disturbing the homeliness of the surrounding space.

Despite the fact that plastic doors are quite lightweight, they are durable, reliable and, given the wide design possibilities, perfectly protect living spaces in the cold. Products made of wood and wood-based materials quickly deteriorate in conditions of high humidity, so plastic options in the literal sense of the word are a salvation not only for baths, saunas, swimming pools and summer terraces, but also in all places where the climate is harsh, humid, with a lot of rainfall.

Plastic does not need to be painted often and should be protected from rain.

Along with lightness, they have a good degree of strength. The basis of their composition is aluminum, and plastic is on top as a cladding. Such doors, unlike wooden ones, do not deform over time and do not sag under their own weight, and the lightweight design does not visually burden the space. The tightness of metal-plastic copes well with drafts, cold, bad weather and even the strongest extraneous sounds: such products provide a lasting sound insulation effect, which is important both for home and public places.

The sound insulation effect of plastic doors is ensured not only by the fact that they close tightly and securely, but also by the use of sealing substances High Quality. Of course, this is most relevant if metal-plastic is used for the manufacture of entrance doors, but also for interior options this may turn out to be no less necessary and relevant.

In addition, additional mention should be made of the uniquely designed clamping device included in the package of metal-plastic doors. It is this that helps ensure their tightest contact with the jambs, leaving no gaps or cracks for noise or drafts to penetrate, which also helps to retain heat in the room.

Doors made of metal-plastic are unpretentious in maintenance; they do not require the use of special compounds for processing, unlike wooden ones. Their colors retain their original brightness much longer, while wood can quickly lose its color under the influence of temperature changes and precipitation, and the paint easily fades in the sun.

Along with the undeniable advantages of interior plastic doors, before purchasing them you should familiarize yourself with some of their features, which should not be called disadvantages, but must be taken into account when purchasing.

It is unknown where the myth came from that metal-plastic doors supposedly have increased resistance to fire and do not even burn in the event of a fire. This is far from true: any person who knows the characteristics of metal-plastic will confirm that such products burn, alas, in almost the same way as wood, except that the aluminum base can temporarily contain the fire. Of course, this fact should not be a disappointment for buyers, but sometimes it is useful to know basic things and not believe what they say in words, so as not to end up in a funny situation later.

Modern colors and coatings add elegance to metal-plastic and the possibility of installing it at home, but for those who fundamentally prefer natural materials, this option is unlikely to be ideal. Painting and lamination will not be able to satisfy the needs of particularly demanding customers, no matter what obvious advantages and the practicality of such a product. In addition, due to the specifics of the material, the production of such interior doors is limited to standard rectangular shape– it can be problematic to make them metal-plastic, for example, an arch, while maintaining accuracy and the absence of visible breaks in the structure.

Despite certain features, metal-plastic doors undoubtedly have more advantages, which can serve as an additional incentive to purchase them. Their strength and practicality are quite capable of competing with beautiful, but capricious wooden products, requiring special treatment and care, and the affordable cost and wide selection of colors, designs and coating methods will allow you to install such doors wherever convenience, cleanliness and practicality are valued.

Which is better - PVC or veneer?

When choosing the material from which the doors will be made, the question often arises about which material is better to choose. Of course, purchasing a product based on natural wood panels is a more tempting prospect. By the way, the concept of PVC is not limited to traditional doors made of solid plastic. There is also a variety of products, the frame of which is made of wood, and on top with the help special technologies a film of any color made of polyvinyl chloride is applied.

Door coating process polyvinyl chloride film very interesting from the point of view of its technology: door panels, pre-treated with glue from synthetic derivatives, are placed in chambers specially prepared for them.

The film is applied to the prepared surface, and then it is processed at very high temperatures. high temperatures. The most interesting thing about this is that the film, without melting or losing its color and pattern, seems to “penetrate” the wood structure of the MDF panel and become one with it. Externally, it can be difficult for an untrained eye to distinguish such a product from a wooden one: only by touch, and even then not always.

And “film” doors, and plastic ones, and products made from “pure” veneer can be equally good in quality and beauty. The main thing is to know certain features of these materials in order to make the right choice. For residential premises (provided there is no high humidity), veneer doors can become optimal solution, and it is best to put one or another in the bathroom or sauna PVC option, remembering that the film, despite its strength, may not withstand dampness and begin to swell. However, this mostly happens when the purchased product is of poor quality.

Any choice should be made based on the purpose of the room and its stylistic features. It is also important financial side: Wood products of any type will always cost more. It is worth giving preference to veneer doors if the entire interior is made in a more strict style - such as classic or minimalism. Doors covered with film can become a “golden mean” for those buyers who still prefer to purchase a product, most of the material of which is natural. Also, film options are more affordable than veneer.

As for doors made of solid foam PVC, they can be placed anywhere if the buyer is not particularly picky about the subtleties of appearance and design. Solid metal-plastic doors, unlike veneer products, are more airtight, resistant to moisture, are able to retain more heat and, as already mentioned, provide ideal sound insulation.

Of course, if we talk about environmental friendliness and compare PVC products with veneer, based solely on this point, the advantage will be on the side of wood. However, it is better to consider the situation more broadly, weighing all the pros and cons - including the issue of practicality and durability.

Thus, when choosing between veneer and different options for PVC products, you need to be guided by the specifics and purpose of the home, office, institution, their level of humidity and interior style. Of course, personal preferences and financial capabilities also play a decisive role when purchasing. If the consumer is confused about what to choose, he should become more familiar with the characteristics of each material in order to make a decision based on this reliable information. correct solution, comparing it with the features of a particular room.

Kinds

Interior plastic doors, like any other, differ from each other in how and where they open. This should also be known and taken into account when planning their installation.

Double swing doors More often they are installed outside as entrance doors, when, if necessary, to let a large number of people inside the room, you can open the second door at any time, or leave it closed depending on the traffic. However, double-leaf structures can also be used for interior purposes. Double doors are installed if we're talking about, for example, about large rooms in country mansions or government institutions, when it is too big size the doorway does not allow the installation of a standard single-leaf door, which can open both outward and inward.

When installing swing double doors in the interior space, you need to immediately decide in which direction they will open: outward or inward. inner space rooms. It happens that it is best to choose the option when the doors open inward, due to the fact that technically there may not be enough space in the corridor, although, willingly or unwillingly, the customer has a desire to leave as much space as possible in the room free space. Of course, the wide doorways in big houses and large apartments represent a difficult task, but it can ultimately be solvable if all the pros and cons regarding the technical possibilities of planning and installation are weighed.

One of the most competent and technically feasible solutions in the case of non-standard and wide doorways is the installation interior doors cassette type . Thanks to their unique design, these “sliding-sliding” doors can be installed inside the wall - with absolutely no damage to the room and with maximum space savings. In fact, cassette doors are the same sliding analogues, the movement of which is carried out by using roller mechanism. The difference between roller doors and cassette doors is the so-called frame. It is she who is mounted on the wall and becomes ideal place for the doors themselves and the very mechanism that ensures their movement.

For plastic doors and their analogues, this design is very suitable: since they have an enviable lightness, unlike their wooden and wooden “brothers”. Being placed in such a cassette box, they move easily, almost silently, without the risk of distortions, falls and other problems that could theoretically arise when using heavier materials.

Cassette interior doors close very tightly, which provides additional sound insulation, and if they are installed in the kitchen, this prevents kitchen odors from penetrating into living rooms. All cassette structures are made exclusively to order, so if you wish, you can install a single-leaf cassette door instead of a standard swing door, which will be an excellent solution to the problem in the case of small-sized rooms.

The only obstacle to installing cassette interior doors may be the high cost of such a mechanism and installation, but in some cases this option may be the only way out of the situation, especially when it comes to non-standard layouts inside separate rooms.

The easiest way, of course, is to plan the size and installation of the door if the opening is standard and provides for a simpler single-leaf design in the form of a regular swing door. In this case, confusion when making a decision rarely arises, unless you also need to decide where the door will open - into the room or into the corridor, which depends on the size and area of ​​both the room itself and the space that adjoins it.

Plastic folding door in the shape of an accordion, despite its unusual and extravagant appearance, is a very practical invention of designers if the interior space is very small and installing a regular swing door is problematic. Also, with the help of an “accordion”, you can carry out the necessary zoning of space, separating one part of it from another. This folding door is compact and takes up minimal usable space.

The accordion door leaves are connected to each other with special hinges, the number of which directly depends on how many parts of the accordion a particular door has. Much, as always, depends on the doorway, which most often has non-standard dimensions. In the vast majority of cases, this type of door is installed precisely in such conditions, becoming a “saving” way out of the situation.

Such an “accordion” is attached to the upper and lower rail structures, and its doors move freely along the rails with the help of an additional mechanism that ensures the smoothest possible movement. However, this option, given the features of its design, cannot be called completely silent, which should also be kept in mind when installing it. An accordion door, like any other interior door, can be made of plastic or wood chips, however, when choosing a material, it is important to take into account that the folding type of door is an additional load on the entire sliding mechanism. It is best to use lightweight material in the form of plastic, without using laminate and heavy types of chipboard.

“Accordion”, like other types of doors, can have solid doors, or can have plastic or glass inserts that allow light to penetrate.

Dimensions

If we are talking about standard apartment buildings, the dimensions of door frames and openings are also standard. They are very easy to work with and there should be no major snags or problems when planning the installation of interior doors. Due to the fact that all manufacturing companies are focused specifically on the standard door dimensions adopted by GOST, this greatly facilitates all the work.

When renovating residential premises, it is important to consider whether the apartment owner plans to dismantle the partitions between rooms and move doorways to other places. If the repair will be carried out without transfer interior partitions, All standard sizes are preserved, and technical discrepancies do not arise during the installation of doors. If a major redevelopment is carried out along with the renovation, it would be advisable for the apartment owner to take care to maintain the dimensions of the new doorways in accordance with GOST standards.

Of course, if the customer wishes, it will be possible to take measurements of the premises and produce equally high-quality interior doors according to custom sizes. But this will cost much more than generally accepted standards, primarily because it will require special manufacturing of doors, and it will hardly be possible to use ready-made kits. Therefore, it would be best to keep the generally accepted door sizes in your house or apartment. This will ensure not only maximum ease of installation, but also a much faster installation process.

The generally accepted dimensions of interior doors according to GOST are:

• a door with a height of 1900 mm should have a width of 550 to 600 mm,
• a door with a height of 2000 mm should have a minimum width of 600 and a maximum of 900 mm.

The same parameters apply to all cassette and compartment types of doors, which have recently become increasingly widespread due to the widespread need to save surrounding space.

Door dimensions according to GOST:

• room doors – height 200 cm, width 80 cm, doorway depth – from 7 to 20 cm;
• kitchen doors – height 190-200 cm, width 60 cm, opening depth 7 cm;
• doors to the toilet and bathroom – height 200 cm, width 70 cm, opening depth 7 cm;
• important size: the thickness of the door frame itself should be 75 mm.

This universal sizing system, accepted everywhere, makes it easy to select the right door or set of doors with the necessary mechanism and fittings. This makes everything much easier preliminary calculations and ensures quick selection of optimal options.

Colors

As has already been said many times, the choice of colors for interior doors is absolutely unlimited for buyers, because modern production technologies can provide any desired color. The range of colors offered is more than diverse, and each consumer has the opportunity to choose the color that will definitely suit him.

Doors made of solid metal-plastic can be colored in the literal sense of the word. They are treated with durable and often bright dyes that look perfectly even, without bumps or unnecessary changes in shades. Colored doors can be purchased for children's preschool institutions, and if desired, put the houses as interior rooms, if the entire interior of the apartment is decorated in the appropriate youth style.

The main thing is not to overdo it with a variety of colors and choose bright colors tastefully so as to preserve the atmosphere of home comfort despite all the brightness of the surrounding environment.

It is known that white metal-plastic doors can most often be seen in kindergartens and in almost all medical institutions due to the fact that they have increased hygiene and ease of maintenance. If there is a desire to install soft white doors at home, an option made of MDF with a polyvinyl chloride film coating will be the most preferable - it looks natural and looks completely homely.

We can talk endlessly about the possibilities of film coatings to disguise themselves as the most expensive wood. The film, firmly fused with the wood panel, can look like solid walnut or pine, and its shades vary from brown to wenge. Any door can be either solid, without inserts in the form of glass or plastic, or transparent, which gives it additional aesthetic advantages.

How to choose?

Interior doors with glass look very elegant and cozy. At first glance, serious doubts may arise about the fragility and impracticality of glass, but now this is far from the case.

Modern glass for plastic doors is highly durable and does not require particularly careful maintenance. In a pinch, they are very easy to repair, and an experienced technician can easily replace any glass elements. Glass inserted into the door may be different shapes and colors, depending on the assortment and personal wishes of the customer. Their surfaces can be glossy with shine or matte, and a special tinted film is often used as a coating.

Ordering doors with or without glass inserts is a matter of taste. Of course, this option will be much more expensive, and if the buyer has a limited budget, a blank door panel without glazing may be the best way out of the situation. Such doors are often lightweight, and if you decorate the panels with warm color tones, they will not look gloomy, and the design itself will perfectly complement the existing modest interior.

If the customer prefers door structures without a threshold, a sliding-type cassette-compartment ensemble is what he needs. Compact interior doors, clad in a cassette mechanism that can be built into the wall, will provide both heat retention and additional sound insulation.

It is only important to resolve the main technical issues: is it possible to install just such an option in a specific room or will you still have to limit yourself to simpler actions.

When it comes to installing multiple interior doors in a private house, which can be quite large, it is important to think about what type of doors and where it would be best to install. Large private houses usually have basements, swimming pools and saunas. In order to provide these premises best care, you should install moisture-resistant metal-plastic doors that will not care about water, humidity, or dampness.

You also need to pay attention to the climate itself and the area in which the house is built, in order to draw conclusions based on this whether it is worth installing expensive wooden panels in it at all.

As for the residential sector of any private house, doors made of plastic with laminated coating, made with taste, can be placed in any room. Glass design in its different options will be most preferable: if you wish, you can even order stained glass for the doors to the living room or bedroom. If in the house big kitchen, again it’s worth mentioning once again about cassette interior doors, which will significantly save space and prevent odors from the kitchen from freely penetrating into the living spaces.

The advantages of interior plastic doors, despite the prejudices that some consumers still have, are much greater than the disadvantages, so if you decide to install them, you should make sure that it is carried out professionally and efficiently. Of course, the customer can take all the dimensions and install the structure himself, but this requires some experience. If there is one, to professional craftsmen You don’t have to contact us, but if it’s not enough, it’s best to entrust the installation to those who are sure they won’t make mistakes either in the calculations or in the installation process itself.

Also, customer reviews indicate that it is better to entrust the installation to professional craftsmen, because during the entire process some problems may arise. unusual situation, which an amateur master may not be able to cope with. Of course, the temptation to save almost half is very great, but given the possible consequences, it is not worth taking such a risk. Moreover, if installation is ordered from official manufacturers who have been working on the market for a long time, they bear full responsibility for the level and quality of work performed.

Installation

Any plastic doors, including interior ones, include door frame, as well as panel or canvas. They are connected by canopies, and fastening is done using different types accessories. When ordering, it is important to consider the list of those additional functionality, which the fittings allow: for example, in the case of plastic windows or a balcony door, this can be a different level of ventilation (up to “micro”), and if the doors are interior, the fittings will provide an insulated structure and, if necessary, fix the door in the desired position.

The door leaf may include a double-glazed window (also called a sandwich panel). It is present in the door ensemble most often for heat and energy saving and is most relevant in the case of installing entrance doors. As for the interior options, if desired, they can be equipped with a single sandwich panel, but in this case you will have to take into account technical features, because this option can significantly increase the weight of the door structure.

How to wash?

Unlike products made from natural wood, plastic doors are impervious to sources of contamination and are perfectly resistant to the most simple methods caring for them. For those who especially love cleanliness and order, it will be enough to simply wash the doors from time to time with a sponge and soap or a soft powder detergent. After washing, it is better to immediately wipe them dry (especially if we are talking about laminated coating or PVC film).

Subject to simple rules care, the doors will last a long time and their appearance will not deteriorate under the influence of environmental factors. It is even easier to care for metal-plastic doors, because the material from which they are made practically does not warp or fade.

Repair

If the materials from which the doors are made are good quality, and the installation was carried out by a conscientious, qualified craftsman, the design will work properly for a long time. However, there may be different situations, requiring repair of interior plastic doors. If the doors are used intensively, sooner or later they may require cosmetic repairs. Experienced craftsmen can eliminate chips, scratches or even dents - it all depends on the nature and level of damage. There are a large number of chemical products that can easily eliminate minor cosmetic defects. If desired, you can use them yourself.

Places where there are scratches or chips are first cleaned of dirt and degreased, then a layer of a special adhesive is carefully applied to them (it is sold in large hardware stores). After the glue has dried, the surface is sanded using fine sandpaper. Processing is carried out until the surface is completely leveled. Then the treated surface must be degreased again (for example, with a plastic solvent), and finally a varnish matching the color of the door is applied.

If the door has a laminated coating, instead of varnish, use a construction marker that matches the color.

Another most common malfunction of a plastic door, which can also sometimes be fixed with your own hands, is a problem with the handle. This is perhaps the most important and most frequently failing element of the door. It may stick, turn poorly, or become loose. If, when turning, the door handle does not want to return to its straight position, before you panic and urgently call a technician, you should try to do the so-called emergency reset. Just below the lock there is a “tongue” made of metal; you just need to press it, and if there are no other problems, the door handle will immediately return to its previous position.

If the door handle turns constantly, this may indicate distortions door profile. The door profile can be deformed for several reasons: for example, during installation, the master could incorrectly calculate the weight of the structure, taking into account the pressure on the doorway, and the door could simply “sag.” If this is the case, then the metal tongue does not come into contact with the adjacent strip because the door has changed its position.

The door profile may fail not necessarily due to the fault of the installers: this may be a consequence of sudden temperature changes, emergency situation, high humidity. In order to eliminate this malfunction, you can disassemble the counter strip yourself, and then place a 3 mm thick pad under it. Such measures can at least partially compensate for the deformation. In the future, you should monitor the operation of the door: if distortions no longer occur, you can leave the mechanism in this state, and if, nevertheless, the “drawdown” continues, you need to invite a professional to help eliminate possible causes. You will probably need a full or partial replacement door profile, which can be done quickly and not always expensive.

A door handle may not turn well due to the simplest and most easily remediable reason: it just needs to be treated with a special door lubricant. If the screws simply become loose, you can simply tighten them with a suitable screwdriver. Glazed doors are also subject to professional repair.

If the glass breaks or cracks, it can easily be replaced with a similar one, or, if desired, choose a different type of glass that matches the size and weight of the door in order to update and refresh the decor.

Options in the interior

If you plan to completely replace all interior doors in a room with plastic analogues, it is important to consider before installation whether they will fit into the existing interior. With a wide selection of colors and styles of doors, making the right decision is not so difficult. For example, if the room is already installed plastic windows a certain color, it is desirable that the doors be matched to achieve the greatest possible harmony and comfort. It would not hurt to remind lovers of arched structures once again that plastic is not best material for this: even if the arch is made as carefully as possible, kinks still cannot be avoided.

Despite the fact that plastic is still considered a material that is not capable of bringing such elements of beauty to the interior as natural wood, the use of glass and fiberglass elements different types when making doors, it easily refutes all speculation about the uninteresting and unaesthetic nature of plastic from the point of view of interior solutions. Interior plastic doors are often decorated with entertaining and eye-catching accessories in the form of door handles of a special shape and color, all kinds of finishes and patterns applied using modern technological means.

A great way to decorate plastic doors so that they cannot be distinguished from their counterparts from natural materials– options with layout. Layouts are all kinds of decorative elements that are placed inside the doors. This can be glass divided into several segments in the form of symmetrical squares, inside of which there is a colored pattern that skillfully imitates stained glass. There are many options for such decor, and any of them can attract the attention of an inexperienced visitor for a long time.

Glass inserts may not always be in the form of clear geometric shapes with sharp corners: the lines can be smooth, and the glass element itself can be made in the form of a streamlined figure of a bizarre shape.

Layouts can cost the owner much less if an option is chosen that is simply glued to the glass using a special compound. This sticker lasts a long time and can be easily changed if desired. Of course, for a strict classic interior there cannot be a cheaper accessory. the best option. In this case, it is better to order a door with glass inserts, which will be divided into several shaped segments correct form in order to maintain the entire ensemble as practically and strictly as possible.

All such accessories and decorated elements (and they can be made from various materials - from the same plastic to lightweight aluminum inserts) should be selected in accordance with the color scheme and style of manufacturing the doors. If the door imitates wood, the recommended colors of the elements may be: brown in different shades, cream, dark yellow. Door white It will look good only if accessories of all possible golden shades are used to decorate it.

In case the owner country house wants to decorate his home in the style of the Middle Ages, cross-shaped decorations that divide the glass texture of the doors into several parts will be an excellent solution.

So, contrary to established ideas about plastic, interior doors made from this material can look no worse than their counterparts made from natural wood, and sometimes they cannot be distinguished from high-quality wooden doors. Fans of environmentally friendly natural materials can argue here, but modern technologies make it possible to maximally neutralize the materials available in the arsenal and make them suitable and safe for use.

Components of the door block: leaf, frame frame, fittings.

Entrance plastic doors have a U-shaped welded PVC frame with aluminum (low) threshold. Balcony doors bordered by a frame around the perimeter.

We produce single-leaf doors (left/right-hand version), double-leaf doors (with a mullioned or mullion-free rebate, including with leaves of different widths), with a vertical impost, adjacent blind or translucent frame filling - in accordance with GOST 30970 "Door blocks made of polyvinyl chloride profiles".

By design options door blocks divided into:

• single-leaf doors (left and right opening), double-leaf doors (including with leaves of different widths), with a vertical impost and adjacent blind or translucent frame filling;
• doors with a transom (opening or non-opening);
• doors with a threshold on mechanical connections (for example, aluminum), without a threshold, with a closed frame frame (threshold from the same frame profile).

Door blocks are divided into internal and external.

Marking:

• "DPV" - internal door block made of PVC profiles (intended for use inside the building: interior, for plumbing units, entrance to the apartment, etc.) door blocks,
• "DPN" is an external door block made of PVC profiles (entrance to buildings, structures, as well as vestibules).

By type of filling, door blocks are divided into:

• glazed (filled with double-glazed windows or various types of sheet glass: patterned, tempered, multilayer, reinforced, etc.);
• solid (filled with panels or other opaque materials);
• light or combined (with translucent filling of the upper part and solid filling of the lower part of the canvas);

The catalog presents prices for popular standard models of PVC doors.
Products are made to order for a specific opening. To find out how much a door will cost based on its size, use: online PVC door calculator.

The cost of a plastic door based on individual dimensions is calculated by the manager. Elements of fittings, handles and locks that are not included in the basic package can be added. Doors are made to order with different opening options: pivoting, double-leaf hinged, sliding, tilt-sliding.

Slab doors

Shtulpovye street doors made of PVC profiles have traditional controls and allow for unobstructed passage across the entire width of the opening - the frame opens from one of the doors.

Shtulp - additional element doors, with lock. The frame is attached to one of the leaves of the double-leaf door. In the fixed position, the sash is motionless. If necessary, the frame lock is unlocked and both doors of the opening open.

You can select and buy a plastic hinged door in the double-leaf doors section.

Color options: painting and lamination of plastic doors

The standard door color is white. To order PVC profile doors can have a color other than white, imitate wood: oak, pine, walnut.

Where to buy plastic doors without overpayment

In Moscow

In Moscow, you can order doors at the company’s office and at home/facility by inviting a field manager.

In another region
To order metal-plastic doors at catalog prices in the Moscow region or with delivery to another region, use the cart / use the “buy in one click” form on the website. To order a door made to your size, please indicate the parameters in the comments. Upon receipt of the application, the manager will contact you to clarify the details of the order and issue an invoice for payment.

The prices in the catalog for standard plastic doors are presented without installation and delivery costs. Delivery is carried out by transport Business-M company in Moscow and the region. To other regions - cargo delivery service. Delivery of windows and doors

We will send the material to you by e-mail

An important component of any home and its face is the door at the entrance. It complements the style of the building and helps create the appearance of the façade. Plastic ones for private homes are becoming increasingly popular: photos of which can be seen in this review. Initially, similar structures decorated the facades public buildings, and now it’s metal plastic structures are increasingly used in residential buildings.

Standard model from plastic material

The advantages of plastic door models include a wide range design ideas And non-standard solutions. Plastic entrance doors protect the building well from noise and adverse weather conditions.

It is worth highlighting the following advantages of such products:

• Wide choose stylistic decisions, which is presented various configurations and great variety color palette. Plastic products can be made with imitation wood, decorated with beautiful stained glass windows and original textured glass.
• The material has excellent sound-absorbing characteristics.
• It is easy to care for.
• Plastic is characterized by resistance to temperature changes, high humidity and ultraviolet rays.
• At correct operation The plastic will not require replacement or even repair.
• It has an affordable price.
• Plastic structures are reinforced with a metal frame.

Plastic products can be used as entrances on balconies, when dividing office spaces, in garages, basements and for passages between rooms.

Helpful information! Plastic structures are also equipped with additional anti-burglary devices. The valve profiles are equipped with steel plates with a closed cross-section. Crossbars are used that are mounted in the canvas. Anti-burglary fittings are installed.

What are plastic entrance doors for a private home made of: photos and design examples

To create plastic entrance doors for a private home, photo examples of which you will see in this review, special profiles are used. These parts are divided into special air chambers and have stiffening ribs.

Profiles can be made using metal reinforcement. All components are connected by mortgages. Closers and power loops are installed on many entrance structures. Special locking mechanisms are installed around the perimeter to ensure a good fit of the door.

Plastic products consist of the following parts:

• The box consists of a profile frame. The structure is reinforced with a steel frame.
• The canvas is additionally insulated with heat-insulating material. The door is partially made of armored glass.
• Bolt locks are used as fitting elements.
• The threshold is made of aluminum or steel.

Sectional profile of a plastic product

Plastic doors can be hinged, sliding or folding. Such products are well suited to brick, concrete, stone or wooden walls.

Expert's point of view

Yaroslava Galayko

Lead designer and studio manager at Ecologica Interiors

Ask a Question

“The price of structures depends on the thickness of the double-glazed windows, the quality of the fittings, the depth of the profile, decoration and manufacturer.”

Components of a plastic door

Metal-plastic entrance doors can be solid and transparent, the photo shows this perfectly. Sandwich panels are used for blind structures. Glass filling can be combined. In this case, the area in the upper part is equipped with double-glazed windows, and the lower part remains blank. The glass used can be frosted, grooved, colored or transparent.

The door design can be double-leaf, single-leaf or equipped with a transom. Double-leaf leaves are shtulpovy. Locks can be mounted under an arc handle or under a push handle. The structures are also equipped with closers.

Design nuances

The general style of the building is complemented by plastic entrance doors with glass for a private home, photos of which are presented below. Such designs are characterized by reliable soundproofing qualities and provide good thermal insulation. They look great with buildings covered with siding, brick or stone walls.

To the benefits plastic products This includes the ability to use curved configurations. In this case, it is possible to create arched structures.

Various mechanisms can be used:

• Swing structures in which the sashes are driven by rotating hinges.

• Pendulum ones can open in two directions.

• Sliding types help free up space in front of the door.

• Semicircular models that move using rail devices look interesting.

• The telescopic mechanism uses many doors that slide on top of each other.

In the production of entrance structures, different types of glass are used. In this case, relief models, triplex, matte are used, and mirror surfaces are also mounted.

The nuances of installing a plastic entrance door

When deciding which plastic entrance doors to choose for a private home: photos and prices will help you make the right choice. No less important issue is the door installation procedure.

• You should not construct the threshold yourself; it is better to purchase a door with a ready-made element.
• The box is inserted into the opening and two wedges are placed on the sides. Then the required level is checked with the door fixed.
• Holes are drilled for mounting the frame. An equal distance is measured from the slats of the box. Dowels are inserted into the recesses made.
• The bolts are screwed into the dowels. The level checks the evenness of the structure.
• The frame must be positioned vertically when cut.
• When the canvas is level, the installation is checked horizontally and vertically.
• The blades are put on the hinges, and the clamping and stroke are checked.
• The area between the box elements and the walls of the opening is foamed.

If the door becomes skewed, it needs to be well adjusted. When the door closes with great difficulty, this is due to sagging of one of the doors. In this case, you need to pay attention to the loops.

If any part of the box is pressed weakly against the opening, you need to adjust the vertical pressure. In this case, it is necessary to remove the plastic covers from the hinges and reinstall the screws that are directed into the structure. If the sash is not pressed properly from above, it is necessary to adjust the screws located in the upper part.

Expert's point of view

The Dveris store offers quality doors With free shipping within the Moscow Ring Road. The presented products are certified and accompanied by a manufacturer's factory warranty. We provide assistance in choosing plastic interior structures, perform their installation and service.

Among the entire range of interior doors, plastic structures attract attention due to their versatility, durability and immunity to external influences. Thanks to this, models with solid or glazed panels can be used in rooms with special temperature and humidity conditions. The doors are made in a modern design and even in the absence of elaborate decor they will be a worthy addition to the interior.

Scheme of work

Types of plastic doors

• Interior. They are often made with a high and wide sash, complemented by handles on both sides and a lock. Door designs fireproof, durable in use, easy to clean from dirt. Products are in demand for installation in bathrooms, swimming pools, winter gardens, living rooms
• etc. Input. Unlike interior doors, these doors have reinforced hinges. The profile system is designed for a wide installation depth, and high strength is achieved through closed reinforcement. The models are not deformed by temperature and humidity changes, the presence special seal prevents the penetration of noise and
• unpleasant odors

from the street.

Office.

1. Door structures are manufactured with reinforced leaves and frames. These models are wear-resistant and are designed for a large number of opening and closing cycles. The products are equipped with durable fittings and a seal around the perimeter of the sash to increase sound insulation properties. Our advantages
2. Advantages of interior plastic doors
3. Durability and wear resistance. Even with intensive use, interior plastic doors serve for many years and retain their aesthetic appearance. Moisture resistance. The structures are not subject to corrosion and can withstand even direct contact with water.
4. Resistance to deformation. Products are not subject to warping under the influence
5. external factors, excellently withstand mechanical loads.
6. Functional fittings. With minimal maintenance of hinges and locks, the doors move smoothly and silently; if any extraneous sounds or signs of misalignment appear, the fittings can be adjusted.
7. Large selection of design solutions. The materials used in the production of structures do not pose a danger to human health and the environment.

To learn more about the benefits of interior plastic doors and order the models you are interested in, call the numbers listed on the website.