To make your summer cottage special, it is not necessary to have extensive design and construction experience. There are many simple options for independent creativity, for example, garden paths from tires. This waste material will acquire new life after restoration, and the technology for laying paths is elementary in execution, so creating them with your own hands using instructions with photos will be as easy as shelling pears.

Advantages and disadvantages of tire tracks

Many owners country houses They prefer to improve the territory themselves. In particular, this applies to travel routes and parking lots. The ideal material for their creation would be tires that are subject to recycling.

Waste tires become acceptable material for garden paths

This option does not require any special financial costs. But there are other positive aspects of using tires:

• availability;
• increased resistance to negative influences external factors(precipitation, high and low temperatures);
• wear resistance;
• durability (does not require annual dismantling).

Rubber does not absorb moisture (even after heavy rain it dries instantly) and
It is impossible to slip on it. It is easy to care for rubber tracks - just walk over them with a broom or spray them with water from a hose. Well, the most significant plus is the ease of installation.

Along with this, there are also disadvantages:

• the need for a large number of tires (even for a small path in the garden you will need several dozen tires);
• unesthetic appearance;
• low plasticity of rubber;
• the need to create a base of gravel, otherwise the rubber track will fall into the ground.

If you don’t have unnecessary tires in your garage, you can go to the nearest tire shop or ask your car enthusiast friends.

Options for tire tracks

To build paths in the country, you can use both tires with and without disks (in the form of cut strips or tiles). In the first case, laying is carried out flat or edgewise. If the terrain is uneven, then whole tires will make comfortable staircase. Moreover, its form can be any.

In order to make even flooring for movement, rubber is taken from tires with uniform wear. It is recommended to take wheels from trucks, since they are larger and the paths will be wider.

Curbs are also made from the side of the tires.

Photo: design ideas for paths

Tires are laid in the form of a ladder, which is convenient for dachas on a hill It is convenient to move along the path made of tires, as it does not slip Rubber from tires can be used to make a convenient access road The material is cut not in the form of strips, but in tiles In places where water accumulates after rain, you can make a bridge from tires The simplest option for a garden path is to cut a ribbon from a tire

Preparatory activities

Before you start laying out trails, you should plan the scope of work. It is better to sketch on paper a diagram with all the elements that complement the path:

• curbs;
• gutters;
• drainage systems;
• lanterns.

Be sure to measure the tires in order to determine the required quantity. And this will depend on the length of the path, its shape and route.

Choosing tires for garden paths

Any tires are suitable for constructing travel routes in the garden. If you want to make the paths wider, it is better to choose truck tires. If you plan to install whole tires, then select them of the same size. For belt type You can take material of different sizes, but you still have to cut it.

Tires of the same size should be selected for the track.

It is preferable to stop at " winter tires", since it is designed for low temperatures. Such tracks will last longer.

Preparation of necessary materials and tools

Prepare the tool for work in advance:

• sharp knife or jigsaw;
• shovel;
• hammer;
• hacksaw;
• roulette;
• pencil or marker;
• axe;
• nails (from 7 cm long);
• wooden pegs.

The only material needed is old tires.

The tire must be prepared first

How to make a tire track with your own hands

Choose the type of garden path from car tires depending on your abilities and preferences. Let's consider technological process each option.

Tape

Depending on the width of the path, 2-4 canvases may be needed. Nail the tapes to wooden boards, leaving gaps of 1.5–2 cm and laid on the ground.

Over time, grass will grow into the gaps left and will keep the flooring from shifting.

It is first recommended to make a base of gravel, which will serve as drainage. To prevent the path from rising, the path for laying it is slightly deepened. This option is suitable for designing passages between beds or plantings.

Stepped

No less interesting way- creating a ladder from whole tires. This is especially true for dachas located on uneven terrain. The main thing is to secure the tires firmly so that when people move on them, there is no risk of falling. You can make a staircase in one or two rows.

The descent or ascent can be made from tires

Installation is carried out as follows:

1. Lay out the tires on the ground. Begin laying out from the bottom tier, gradually moving upward. After installation, each tire is carefully checked for reliability. For greater stability, it is advisable to slightly drown it in the ground.
2. Sand (earth) is poured inside the tires and compacted.
3. Sprinkle the finished path with gravel to prevent slipping on it in wet weather.

From rubber plates

Paths in the garden can be made from rubber slabs. These are square or rectangular pieces cut from the same rubber from tires.

Tire rubber can be cut into tiles

They are attached to a base prepared by mixing acetone and polyurethane glue. It is important to maintain proportionality when laying slabs. The same indentation should be made between the workpieces. It will look beautiful if the gaps between the tiles are filled with colored pebbles and the coating itself is painted.

Video: how to make tiles from tires

Construction of borders

The installation of the path is completed by erecting a curb made of rubber from tires. This is done not only for the sake of decoration, but also to firmly fix the flooring.

You can decorate the edges of the garden path in different ways:

• bury the tires entirely in a vertical position;
• cut rubber bands and fasten them with nails, bolts or metal staples;
• cut the tire in half and bury the resulting arcs in the ground.

To decorate the edges of the path, it is better to use truck tires

It is recommended to use imported tires, as they have softer rubber and are easy to cut with a knife. And in order to make a cross-section you need a more serious tool - metal scissors or a jigsaw.

To decorate the edge of the path, you can use the bars remaining after paving. They will also serve as a support.

Decoration

To increase the resistance of rubber to moisture, temperature changes and ultraviolet radiation, painting is recommended. When choosing paint, preference should be given to those marked KCH-136 (intended for rubber). This paint absorbs up to 97% of sunlight and creates the smoothest possible surface. Once applied, it dries within a few hours.

If painting is done at a temperature of +25 °C, the garden path can be used within 2 days.

Mistakes when creating tracks from tires

To the track on personal plot has served for more than one year, it is worth listening to some advice:

• Do not lay out tires without first leveling and compacting the soil. Even with the apparent levelness of the ground, in the future there is a high probability of subsidence and deformation of the sidewalk.
• Tires cannot be considered an absolutely harmless material. When exposed to strong heat in the sun, it can emit harmful substances. Therefore, it is recommended to cover tire tracks with protective agents.

Video: a clear example of creating a garden path from old tires

As practice shows, you can make something worthwhile out of any unnecessary products. This also applies car tires. Using them as building material for garden paths allows you to save a considerable amount and improve the area for practically nothing.

The presented material will be useful for many gardeners, because it outlines brief information about how you can make comfortable garden paths from old tires.

They can be an excellent substitute for classic concrete slabs, so in practice they occur quite often.

From both a practical and economic point of view, the use of waste tires to create special paths on land plots is an excellent opportunity to get rid of unnecessary material and turn its availability to your advantage.

Undeniable advantages

The main advantages of garden roads built using used tires include the following factors:

1. Easy to care for coating.
2. Rubber dries quickly, so even after heavy precipitation, walking on it after a certain time is comfortable and safe, since there is no risk of slipping here again.
3. Technical ease of manufacture.

All this indicates that a gardener can prepare a path using a similar method with his own hands.

The main thing in this situation is to have a clear understanding of the nature of the work ahead, as well as to follow some technological tricks.

What to do

To get a quality garden path made from tires, important act according to a previously planned plan. It could be based on roughly the following basic actions:

• tires are placed on the ground in a horizontal position;
• for stability of the tire structure, they are lightly dug into the ground;
• earth is poured into the holes.

Not superfluous practical step will be the use of gravel as required material for powder, because it does not allow shoes to slide on the rubber when it is still wet. In this way, the gardener will protect himself from hypothetical injuries associated with the consequences of possible falls.

Of course, the very appearance of the untreated surface of car tires can hardly become a decoration on the territory land plot. And in order to provide such paved paths with an attractive design, the use of paint is quite acceptable.

For example, a path painted in black and white tones. It seems to form a stylized composition of a chessboard. In any case, outwardly it all looks very unusual and creative.

Therefore, many visitors and guests are able to appreciate a similar creative idea owner garden plot, who built similar crossings on his own land plots.

In any case, the scope for creativity here is simply colossal, which must be overcome with the help of your ingenuity and practical skills.

And one fine day the garden can turn into a wonderful place to spend as much of your free time here as possible, enjoying nature and original design its land territory.

A summer cottage is a great place to bring extraordinary ideas to life.

The owners of country houses try to improve their territory and use unnecessary things to create compositions, which, after restoration, become a decoration of the site.

These are both kitchen utensils and antique furniture, multi-colored lids. Add some flair to landscape design car tires will help.

Craftsmen are very creative, so they make flower baskets, swings, swimming pools and sandboxes for children from tires.

An example of using tires - a homemade pond

If you get a little creative, you can easily create a garden path with your own hands on a plot of old tires.

Pros and cons of using tires in path construction

The advantages include:

1. The main advantage of rubber is high quality . Despite its service life, the tire remains resistant to temperature changes and can withstand any precipitation well. Its appearance does not deteriorate from an increase or decrease in temperature. Therefore, tires occupy the main place in the arrangement of a garden path. The equipped path will not crack under the influence of frost, will not get wet under heavy rains and will retain its shape in the hot summer.
2. Behind the tracks easy to care for. You just need to sweep away the debris and water it with a hose from time to time.
3. Road made of car tires – safe way site arrangement. Even after a heavy rain, the rubber dries quickly, and it is almost impossible to slip on it.
4. Easy to create with your own hands, perhaps, is the main advantage of a garden path made of tires.

The only drawback of such material is that it is required a large number of. But this is not a problem either, because you can go to a service station for unnecessary tires.

Ways to use tires

To create tracks on summer cottage you can use 2 options:

• arrangement using car tires;
• usage rubber tiles, which is obtained during the processing of rubber tires.

Path-ladder made of car tires

A ladder path is suitable for arranging uneven territory.

For example, along such a path it will be convenient to go down to the pond located in the background of the site.

Depending on the functional load of the stairs, you can lay out the path in 2 rows.

For the manufacture of original staircase doesn't take much time, and this is perhaps the most a budget option.

Manufacturing process

The tires are laid flat on the ground, starting from the low part of the site and going up. To make the tires stable, they should be sunk slightly into the ground and soil should be poured inside the holes.

Advice! In rainy weather, this path can become slippery, so it is recommended to sprinkle it with gravel.

The ladder path absorbs well. Walking on it is much more pleasant than on asphalt or concrete steps. During movement, the load on the joints is small, so fatigue in the legs will not be felt.

We build at the dacha using our advice and step by step instructions. More details in the article.

Coniferous tree larch: planting and care, as well as tree propagation. about larch requirements for soil composition and other nuances of cultivation.

Garden path made of rubber modules

This track is convenient and practical to use. It is laid out like a puzzle.

At any time, the rubber modules can be moved to another location or their inclination can be changed. This will result in a new design.

Path made of rubber square tiles

To create such a decorative path, you will need to buy rubber tiles.

Of course, making a track will cost you a little, but it looks much better and more original than a strip made from a tire.

Laying rubber tiles

The manufacturing process does not take much time. You can simply lay out rubber tiles in a checkerboard pattern directly on the grass. Squares can be pressed down with decorative stones anywhere.

Over time, the tiles will lie to the ground, and the beautifully protruding grass will harmonize with the overall design. The video below explains how to cut a tire.

Path made of rubber rectangular tiles on a concrete base

From rectangular tiles you can arrange a path near the pool or around the fountain.

The same car tires are used in the production of “rubber mats”. The performance properties of the tiles are no different from tires; they also last a long time and do not slip.

And most importantly, with their help you can diversify the design and create a unique composition.

There is nothing complicated during installation. It is secured using special locks or bushings. When constructing a path from rubber tiles, you need to take into account one nuance: the thickness of the material.

Tiles whose thickness is less than 20 mm should be mounted on a solid base: cement screed, wood flooring or asphalt surface.

At the very beginning, it is necessary to level the base, fill in all the depressions and remove bulges, cover up chips and crevices, the appearance of which was caused by external factors.

To treat the base, mix acetone and polyurethane glue, taken in equal quantities. Well, then, just your imagination.

When making a track, proportionality should be taken into account. There should be equal distance between the tiles. The space can be filled with crumbs. It will look beautiful if the path is made in the same style.

But not less interesting option It will happen if you fill the space between the tiles with multi-colored pebbles.

Do-it-yourself track creation technology

Every summer resident dreams of beautifully decorating the paths between the beds, or the approach to the parking lot, so that it is convenient to walk along them even in rainy weather.

It’s uncomfortable to walk on boards, and they don’t look nice; linoleum is a bit slippery, and slate can crack.

Therefore, to create a track you need to choose specialized rubber that will last longer than all these devices.

Tools and materials for work

You will need:

• car tires of the same size;
• sharp knife or jigsaw;
• oil or soap solution;
• wooden block, pry bar or adjustable wrench.

Recently, my aunt was introduced to my niece’s blog; as a summer resident, she was interested in the “Ideas for a Summer House” section. An order has been received for good idea for garden paths. That's what I like country house construction and renovation, it provides space for activity, and not only in the spatial sense, but also in terms of the implementation of the most unexpected ideas.

So, let's go back to our sheep tracks. There are a great many options, one more beautiful than the other. Wood will always be paramount for me when faced with a choice. Still, a living material, breathable, warm.

Paths consisting of different segments connected together also look very nice, especially when one of the segments is greenery in one form or another.

A mosaic of painted pebbles sealed in concrete refers, in my understanding, to artistic creativity. You create a canvas using an unusual technique.

But there is such a very simple and budget option, you put together puzzles from rubber modules, I like the fact that you can always rearrange them, you never know, plans have changed, you will need space. It's just a minute. Although, of course, it looks more like a temporary measure. In the end, all summer residents and owners go through a state of temporary personal plots, so it will be useful on the farm.

On the website neumaticoadicto.blogspot.com.es the author went further, he makes rubber tracks from old tires, what about tracks, toys, jewelry, furniture, shoes... in general, when all the dacha affairs will be in order (if at all really) you can equip yourself a workshop and create there, even if only from old tires. Like this:

And from the sidewalls you can build a flowerbed like this and walk around in flip-flops with tire soles.

This no longer has anything to do with the paths, but it has everything to do with the dacha.

Planning the location linear objects and definition optimal option. Get advice on the topic of planning a linear facility and order development project documentation in the INTERPROJECT company can be found on the company’s website www.interproject.ru.

A beautifully made do-it-yourself tire track is an original and practical solution for landscaping the site. Using inexpensive materials you can make a path that in its appearance and strength will not be inferior to more expensive analogues.

Material advantages

Paths made from old car tires have a number of advantages, including the following:

1. Long service life. Since car wheels can withstand heavy loads, their processing results in a durable and elastic material that is characterized by high wear resistance and a long service life.
2. Moisture resistance. Thanks to their structure, rubber tracks quickly absorb moisture from the rain, and due to their rough surface, they do not slip and are safe (you can even walk on them barefoot).
3. They do not require special care. Rubber cover It has a monolithic structure and its care is reduced to washing with a hose. If in winter period If ice forms on the path, it can be removed using a regular shovel.
4. Easy to install. Installation work do not require special knowledge, skills or special tools. The rubber plates fit together easily and do not form gaps on the surface.
5. Affordable price. The price of rubber material is several times lower concrete covering, ceramic tiles, other materials.
6. Rubber tiles are resistant to temperature changes and negative impacts external environment.

You can make a path from tires yourself

Laying methods

In practice, there are several ways to use tires as a material for garden paths:

1. Laying whole car tires. This is one of the simplest and quick ways, but its disadvantage is that often the aesthetic appearance of the finished track leaves much to be desired.
2. The use of rubber tiles, which are produced by recycling tires.
3. The use of rubber bands, which are personally cut from car tires.

Video “Garden paths from old car tires”

From this video you will learn how to make garden paths from old car tires with your own hands:

Rubber bands

The process of making a track from rubber bands involves the following steps:

1. On initial stage material is being prepared. These can be tires from both cars and trucks (depending on the area of ​​the site and the original idea).
2. The surface is cut out. This action is due to the fact that only a tread is required to make the track. It can be separated using a sharp knife, which must be soaked in oil or soap solution from time to time.
3. As a result of separating the tread, a ring is obtained, which is cut in such a way as to form a tape - the basis for the future track. The number of tapes depends on the width of the future track.
4. All tapes must be adjusted to length and their edges attached to a block previously lubricated with oil. Experts recommend leaving a gap of 1–2 cm between the parts of the path. It is important that the installation process be carried out in dry and warm weather.

Before laying the rubber plates, you should carefully level the soil and, if necessary, compact it (the surface must be hard and level). Laying rubber plates on sand is not allowed, as they will move out of place. To fasten the tiles together, a special polyurethane adhesive is used.

Whole tires

Whole tires are most often used to create ladder paths. This option is relevant for areas that have a certain elevation, for example, if the dacha has a descent to a pond, river or other body of water.

In this case, the tires are laid out on cleared and prepared soil in a horizontal position. This is done in two rows, while the tires are sunk slightly into the ground, and soil is poured inside the holes. Thus, finished design turns out to be more durable and reliable. To prevent the path from becoming slippery and dangerous in rainy weather, it should be sprinkled with gravel.

The finished staircase path has excellent shock-absorbing properties, and it is much more convenient to walk on it than on concrete steps and asphalt.

Separate borders

Rubber tires are an excellent material for fencing construction. different heights. Most often they are used to fence a children's playground or flower bed. In the process of making curbs, it is enough to cut the tire into two parts. This can be done with a knife or jigsaw. The resulting pieces are dug into the ground with their cut sides. To give finished product original appearance, it can be painted, applied with some drawings or patterns.

It should be noted that construction technologies do not stand still, but are constantly evolving. IN Lately ready-made ones are becoming popular roll coverings which are made from recycled rubber. They are easy to install, easy to roll out over the surface and have an elegant appearance. This coating is laid on asphalt or concrete; using it on the ground will not provide proper adhesion to the surface, as a result, the service life of the path will be shorter.

The use of car tires for arranging paths in this area is a simple, affordable and practical solution that does not require large amounts of time and money.