What you can use to make a mole repeller with your own hands:

• plastic bottles;
• cans;
• electric alarm clocks;
• radio and speakers.

The first three types of repellers do not require any special knowledge or skills. From plastic bottles invented maximum amount various repellers.

Of the industrial mole repellers, ultrasonic ones are the most popular. But according to reviews, not all of them are effective. They speak negatively about ultrasonic mole repellers Russian production and praise the Japanese.

According to homemade repellers, they note that moles have little fear of windmills and turntables, sometimes making a hole right next to the pin. Ringing alarm clocks or constantly playing modern music to the animals will effectively get rid of moles from the area.

The simplest skewer - DIY noise maker

Keep in mind that the mammal is blind, but its hearing and sense of smell are impeccable. For this reason, it is important that the mole repeller made from a plastic bottle creates noise and vibration. This effect is achieved by blowing wind, which sets the device in motion: the blades rotate, transmitting sound waves downward: a resonance is created inside the ground, scaring off moles. Remember that to protect 6 acres you need to place about 3-4 small wind turbines.

If it is not possible to use several containers, then you can limit yourself to one. To work you will need:

• plastic bottle with a volume of 1.5-2 l;
• metal pin;
• Part water pipe;
• construction or stationery knife.

The turntable manufacturing process is very simple. Do the following:

1. Find the place where the mole passed, install part of the water pipe below the detected passage.
2. Take the pin, place it in installed pipe, fix the part with a cork or using a metal plate and self-tapping screws (tighten them until the caps fit snugly against the plates).
3. Make a hole at the bottom of the container: its diameter should be larger than that of the pin.
4. On the walls of the container, draw the letters “P” inclined to the side.
5. Cut the blades according to the markings and bend them.
6. Place the made plastic propeller onto the pin: it should go all the way to the neck, screw on the cap.

The simplest thing is to make a pinwheel that, when rotated by the wind, creates noise. The vibration is transmitted to the ground through the stand and scares away the animals. Birds and reptiles also prefer to stay away from the unknown. It should be taken into account that “motley ribbons” indeed have a “quarrelsome” character and may be offended by an unwelcoming reception.

A mole repeller made from a plastic bottle is a necessary thing for the owner of a private house. The whole point is that the appearance of this animal on personal plot does not bode well for its owner. In the garden, for example, the presence of a mole is dangerous because they disappear en masse earthworms, loosening the soil. In addition, such a pest, digging a new underground path, pushes up layers of infertile soil. Therefore, it is simply necessary to scare off moles or get rid of them, because the well-being of your garden plot is at stake, the maintenance of which is already spent a huge amount of money and effort.

There are many ways to fight, but special attention Deserves mole repellent devices made by you yourself.

This is the most best option V financially, and its effectiveness has been tested in practice.

Therefore, you need to figure out how to make a repeller from improvised means.

Noise device – the best remedy to repel moles.

How to make a windmill from a plastic bottle? Its production includes several subsequent steps:

• The key element of the turntable is the axis of rotation. It could be welding electrode, which is no longer used for its intended purpose;
• It is very important to remove the coating from the electrode. To do this, just hit it several times with a hammer and then scrape off the cracked layer;
• we start making holes in the bottle (the electrode must pass through the bottom and lid of the plastic container);
• needs to be fixed around the axis copper wire– it will facilitate the process of rotating the turntable;
• Next, you should use a marker or felt-tip pen to mark the axes that will divide the bottle into sectors. For example, to make a turntable with three blades, you need to ensure the presence of six sectors, and with four - eight parts;
• then make U-shaped cuts and bend each of the sectors to form blades;
• The final touch is to insert an axis in the center of the bottle. Then the pinwheels made from plastic bottles are attached to the ground in a personal plot or vegetable garden. It is better to place several anti-mole turntables around the perimeter of your territory: this will increase the chances of the pests’ rapid surrender.

This device operates as follows: in the presence of wind, the bottle rotates, and vibrations are transmitted to the ground. This is a good product for getting rid of moles, made from a plastic bottle.

Video “How to make a repeller with your own hands”

From the video you will learn how to make a repeller yourself.

How to make a pinwheel from beer cans

A wind generator made from a beer can is a good alternative to the first method. What is this pinwheel made of? The following tools will be useful for its manufacture:

• liter beer can;
• metal or stationery scissors;
• metal tube (1-1.5 m long);
• self-tapping screw;
• drill.

Such turntables are built on the principle of windmills. But there are some peculiarities: you need to bend the blades of the future turntable away from the moles in such a way as to give the device an asymmetrical shape.

Using a self-tapping screw, this repeller is attached to a metal tube, but it is not screwed in completely (otherwise the rotation process will not be active enough).

It’s clear how to make a mole spinner with your own hands. And the principle of its operation is practically no different from its plastic counterpart.
But can you really rely on its effectiveness? You will be able to achieve the desired results if you build several mole repellers with your own hands. With their help, you will force unwanted guests to leave your garden plot forever.

Video “Windmill against moles”

From the video you will learn how to make a windmill.

The mole looks like a cute, harmless animal, but it can cause destructive damage to a planted plot of land. The mole lives underground and, breaking through tunnels, harms the root system of plants.

Ways to combat moles are as follows:

1. Ultrasonic repellers;
2. Poisoned with food;
3. The holes where the mole comes out are filled in.

Some gardeners use homemade traps. About, how to make a mole repeller yourself and which of them are more effective is described in this article.

Types of repellent devices

All repellers, even homemade ones, are divided into 4 types:

1. Mechanical. They are effective because their parts, when moving, create noise and vibration that scare away the animal;
2. Biological - capsules containing aromatic oils. Pests cannot tolerate their smell. also in this group includes plants whose smell cannot be tolerated by moles;
3. Electronic mole repellers. They are usually vibrating, powered or battery operated;
4. Ultrasonic. Scare away small pests by emitting frequency sound waves. When they hit the ground, such sounds send a signal of danger to the animal’s brain.

Although the modern market offers a huge number of mole repellent devices to choose from, homemade devices They also enjoy considerable success. If you use homemade repellers in a comprehensive manner in the fight against pests, then the land area can be completely cleared of annoying animals.

Watch the video! DIY mole repeller

How to make a mole repeller from a plastic bottle

A plastic bottle is an indispensable universal item used to create various devices in the garden. It can be used to make an excellent weapon against moles, the so-called windmill.

Method No. 1

For making a windmill from a plastic bottle necessary:

• large scissors;
• plastic container 1.5 l;
• permanent marker;
• awl;
• stationery knife;
• self-tapping screw;
• metal plates with a hole in the middle (washers);
• strong stalk.

The manufacturing process itself consists of the following steps:

1. Use a permanent marker to make a mark on the bottom of the plastic bottle. Draw a strip just above the bottom along the lower border;
2. Using a stationery knife, cut off the figured bottom of the bottle along the drawn strip;
3. In order for the spinner to rotate in a clockwise direction, you must correctly mark the bottom of the bottle. First, draw a line with a marker and draw it from the center of the bottom of the bottle to the center of any of the convex irregularities. Next, draw a line that goes from the center of the bottom and ends in the concave part. And thus we place markings along the entire bottom.
4. Use large sharp scissors to cut out unnecessary elements. The result is a device in the form of a propeller. We cut out the first element and then cut through one after another.
5. 5 such parts should be removed;
6. In the resulting bottom, we pierce a hole in the center with an awl heated on the fire.
7. We put a washer on the prepared self-tapping screw and insert it from the inside of the propeller. Then we put three more washers on it;
8. Take the remaining element from the bottle. Use a heated awl to make a hole in the lid and screw a self-tapping screw into it. In this way the propeller is connected to plastic bottle. There is no need to screw in the screw all the way. The plates must rotate freely;
9. Attach turntable to the support.
10. Two holes are made in the neck and a small nail is inserted into them, which is then hammered into the handle.

The principle of operation of such a windmill is simple; gusts of wind, hitting the propeller, begin to spin it, and the largest element turntables It also rotates around the nail. The washers create noise, which scares away small pests.

Method No. 2

This method requires fewer items to be used. You will need a stick, garden shears and a bottle:

1. We make wide cuts in the walls of the plastic bottle from top to bottom;
2. From these holes we make two more smaller ones perpendicular to the main one. One above, the other below;
3. We bend the resulting elements to the sides, you should get blades;
4. We put the resulting mechanism on the support after making a hole in the bottom of the bottle.

The wind rotates the blades, creating noise that scares away moles. Such devices are usually placed near an animal's burrow.

Advice! If you do end up catching a mammal, it is worth remembering that it can bite painfully. To protect yourself from an unpleasant surprise, you should wear thick gloves or mittens.

Method No. 3

To build a structure for repelling moles, you will need elements from the second method, as well as a plate cut from the wide part of another bottle:

1. In a plastic bottle we will make slits 15 cm long;
2. From the additional part it is necessary to cut the blades for the propeller of approximately the same length;
3. The blades must be inserted into the holes to form a propeller;
4. You need to make several holes in the lid and insert metal rods into them. Then attach the device to the stick.

When rotating, a rustling sound is produced, accompanied by vibration. Hearing it, the mammal gets scared and feels discomfort, so it moves to another habitat.

Method No. 4

Along the perimeter land plot you need to stick sticks, placing several supports in one place. They need to put empty plastic bottles or beer cans.

When there is a gust of wind, the plastic or metal will bang against each other, creating noise that prevents the approach of a harmful mammal.

Method No. 5

This is the so-called electronic mole repeller. It is made from a hollow metal pipe. The scheme is like this:

1. The pipe is dug into the ground and an inexpensive electronic beeping part from a battery-powered alarm clock is placed inside;
2. At the top, the pipe is covered with cloth to prevent noise from reverberating throughout the surrounding area, and with a cut-off bottle to protect the structure from rain.

The effectiveness of homemade devices

The mole is a blind animal. This makes his hearing and sense of smell impeccable. When constructing structures from simple elements, either ultrasonic mole repellers, or repellers that create noise and vibration.

Conclusion

It must be clearly remembered that moles live in families consisting of a couple of adult individuals and several younger ones. Some mole families unite. And the passages they break through reach several meters in depth.

Moreover, each underground passage has several exits, which makes it difficult to accurately determine the location of the family.

All of the above devices have been repeatedly tested by gardeners. And their production is inexpensive. Therefore, even when buying modern device To combat harmful animals, don’t be too lazy to make a couple of homemade ones.

Watch the video! Windmill made from a plastic bottle

It is difficult to meet the owners of dachas or personal plots, who would not encounter such a problem as the appearance of moles. Most owners do not want to deal with chemicals, which are already used in abundance. Therefore, they use quite simple but effective devices that repel these underground diggers. It should be noted that mole repellers can be bought in stores, as well as made with your own hands from improvised, and sometimes unnecessary, materials on the farm.

To make simple mole repellers, it is permissible to use various materials, sometimes unnecessary. For example:

• Empty plastic bottles will do.
• Cans.
• Alarm clocks, both mechanical and electrical (electronic).
• Radio receiver and speaker.

As a rule, making repellers from the first three components does not require much intelligence; it is enough to be patient and eager.

The bottle placed on the pin is the design of the simple repeller. The same structure can be made from empty beer cans. The pin must be stuck into the ground so that the vibrations from the repeller are transmitted into the thickness of the earth.

Interesting fact! An iron pin is much more effective than a wooden one, since metal transmits sound waves better.

A windmill against moles is a more complex design. To make it you will need a beer bottle with a capacity of up to one and a half liters.

It is important to know! A high-quality repeller can be made from an ordinary beer bottle with a narrow, elongated neck.

To make a windmill, you need to have some more tools, such as scissors, a marker, a self-tapping screw, a nail, an awl and a pin (stick). Usually, ready-made schemes and there are no drawings, since the device is quite simple. In addition, there is a video where you can clearly see, frame by frame, the methodology for making such a repeller.

1. You need to cut off the bottom of the bottle along the line that can be found on the bottle.
2. The cut bottom should be turned upside down, resulting in the shape of a five-pointed star. Use a marker to mark the areas to be cut. A section is cut out from the center of the bottom, both in the middle of the “star” beam and along the depressions located between the beams.
3. The same operation should be carried out on all rays. The result should be a kind of propeller. After this, a hole is punched in the center of the bottom. Since the product is intended for rotation, the hole should not have burrs. In addition, the diameter of the hole should be slightly larger than the diameter of the screw.
4. This propeller is screwed using a self-tapping screw to the bottle cap (the same one), and strictly in the center. To simplify this task, first make a thin hole in the lid. For reliability with inside The cover screw is fixed with a kind of nut made of any material.
5. From the bottom of the bottle neck, 2 holes are made strictly opposite each other.
6. On final stage a windmill is taken and secured to a wooden stick, after which the entire structure is stuck into the ground where necessary.

Under the influence of wind force, the structure emits unpleasant sound, which negatively affects moles. The advantage of the design is that the windmill turns automatically, depending on the direction of the wind.

To drive a mole out of the area, it is enough to do more simple design. To do this, you need to take a plastic bottle and simply place it on a wooden stick. Below you can see what this design looks like.

You can enhance the effect of such a design if you bury a metal pipe in the ground at a level below the molehills. After this, a pin with a windmill is installed in the pipe. To prevent this pin from dangling, it is fixed in the pipe. It is better if the design works regardless of wind direction. To do this, special blades are cut into the sides of the bottle and bent outward.

Many summer residents, going to their dacha in the summer, stock up on beer in metal cans. After the beer is drunk, many summer residents throw them away, but in vain! After all, they can be used to make an effective mole repeller.

And again, you can start from the very simple option, when a beer can is simply put on a pin. The jar is light enough, so it begins to make sounds at the slightest wind. If you take a rope and sort of string the jars on it so that they touch each other, like a garland. This garland can be mounted on two pins made of wood or metal. Most difficult option- this is a spinner.

Products made from such scrap materials are light, simple, but effective.

In the photo below you can see more complex design repeller.

Not everyone can install such a mechanism, although in fact it is not that complicated if you study it in more detail.

Alarm clock repeller

To be effective, you need to have several alarm clocks that can be set different time signal is triggered. Alarm clocks are placed in jars, which are closed with lids and installed in different places on the site. The best option, when containers with alarm clocks are buried in the ground. As a result, after a certain time, all the alarm clocks underground will start to go off stably. Sounds regularly made in the area will force moles to look for more comfortable places.

The second option consists of a pipe buried in the ground into which an alarm clock is placed on a string. Thanks to the rope, such an alarm clock can always be taken out of the pipe.

On a note! Alarm clock repellers are the most effective. As a rule, battery-powered alarm clocks are better suited because they don’t have to be constantly adjusted like mechanical ones.

Speakers and receiver

The scheme is quite simple! You need to take a working receiver (old or new), after which the speaker is removed from it and placed in a hermetically sealed container. Before this, long wires are soldered to the speaker and connected to the receiver. The container with the speaker is buried on the site. After this, all that remains is to turn on the receiver.

The difference between homemade and factory models

Making a mole trap with your own hands from a plastic bottle is a super way to get rid of uninvited guests without resorting to serious devices. The appearance of pests is indicated by visible bumps on the surface of the ground. The result of such settlement will be loss and damage to the future harvest.

Advantages of using a turntable

During the hunt, the animal is capable of digging up an area even in a short period of time. A bottle spinner for repelling moles will scare them away and protect existing crops.

Interesting! From experience, some summer residents know that underground inhabitants cannot tolerate various noises.

For example, this could be the sounds of an alarm clock, knocking on metal, or plastic crackling. Since the goal is not to destroy the guests, the trap will solve the problem in a humane way.

Basic manufacturing methods

Inventive summer residents came up with a large number of ways to quickly build devices from improvised and even completely unnecessary things. Among them, there are several simple and quite effective options for combating moles.

Pinwheel made from a plastic bottle

The device looks like a kind of weather vane, which, when exposed to wind, produces a sound that is unpleasant for moles. It can work in any conditions.

To make a windmill, you will need a number of simple steps:

• take a standard 1.5 liter plastic bottle;
• Use sharp scissors to carefully cut off the bottom;
• turn it upside down and draw lines for cuts with a marker.

There are five sections on the bottom. It is necessary to mark the areas from the edge of the circle to the middle parts of each ray. Cut out the selected areas. After this, making a do-it-yourself mole trap from plastic bottles will be almost complete.

In the center you need to punch a hole with smooth edges. Insert a self-tapping screw into the center of the lid and screw it in until it stops.

For a more rigid fixation, it is advisable to use a nut of suitable diameter.

On the neck of the bottle, along the middle line, make two holes for the nail opposite each other. After this, secure the windmill to a pole and stick it into the ground.

Tin repellers

These include simple devices like a piece of reinforcement with a hanging beer can, for example. Surfaces hitting each other under the influence of gusts of wind will emit loud sounds, unpleasant for moles. The result of the manufacturing scheme is presented below.

An additional advantage is that metal fittings will conduct sound into the ground to great depths. As a result, the moles will leave the developed territory.

In the form of an airplane

Instructions on how to make an airplane-shaped mole repeller from a plastic bottle step by step:

• To make a tortoiseshell, it is dug into the ground metal pipe medium diameter;
• a separate pin will need to be tightly attached to the top of the site;
• make several cuts in the form of blades on the bottle;
• make holes at the bottom of the container with a hot nail;
• Place the bottle on the installed pin.

When exposed to wind, the blades will begin to rotate. The vibrations of the windmill will be directed towards the soil and scare away moles.

From several

Method No. 5

To make another option, you will need a stick, garden shears and a plastic bottle. Further like this:

• in the walls you need to make wide cuts along the walls;
• they will require 2 additional cuts in a perpendicular direction at the top and bottom;
• after bending individual sections, you will get unique blades;
• the assembled mechanism must be put on the support, after which the device will become ready for action.

Under the influence of wind, parts of the system will begin to rotate. This will create an unpleasant sound that can rid the area of ​​mole settlements.

Method number 6

To make a mole repeller with your own hands from a plastic bottle, you will need an additional plate cut from another bottle. Make 15 cm long slits in a solid bottle. Blades for a propeller of approximately the same size are made from a separate part.

Then they are stuck into the prepared holes to form a fan. You will need to make an additional puncture in the lid for the metal rods. After this, attach the structure to the stick. When rotating, the homemade product will make a peculiar noise to scare off moles.

The effectiveness of homemade scarecrows

Outwardly, moles look like cute and harmless animals. But at the same time, they can cause significant harm to the garden plot. Moles by nature are blind animals. Thanks to this, their hearing is highly sensitive.

Attention! Taking into account the special influence of sounds, the irritating effect homemade devices turns out to be much more effective than in cases with other animals.

Accurate determination of the permanent habitat can be difficult because the family has several exits from the burrow. Therefore, determining its location is not easy. The task is further complicated by the fact that the depth of the hole can reach several meters. As a result, the right solution is to make homemade turntables from available or scrap materials.

Moles, in addition to causing harm, can also be beneficial. They constantly need food of animal origin. The animals eat beetles, caterpillars and worms in large numbers. Therefore, when deciding on the need to fight, you need to correlate these two facts. In addition, during the digging process, moles loosen and mix the soil.

It is widely believed that the animals gnaw and expose tree roots. This is wrong. The damage is caused by mice and mole crickets. Moles, on the contrary, help in the fight against their excessive reproduction.

In addition to the methods described above, you can use simple alarm clocks. You will need a few pieces in total. Clock mechanisms are located in glass jars and placed in pits. In the process of fighting, you will need to set alarms several times a day for different times. As a result, moles will quickly leave the territory due to the regular and shrill ringing.

To increase efficiency you can take polymer pipe medium diameter and drill many holes. When the clock mechanism is triggered, the hum will spread along its entire length and in all directions. Intense ringing will quickly force ferrets to change their habitat.

Repellers

Taking advantage of the fact that moles are very sensitive to various sounds. A number of manufacturers currently produce electroacoustic devices. First of all, ultrasonic devices. They do not cause any harm to humans, but for moles they become a problem for daily existence on the site.

Among the advantages is the penetration of sounds and other vibrations everywhere, despite obstacles. Typically, such devices operate from autonomous power sources, so they can be placed anywhere in the garden.

Inefficiency is caused by the fact that the surrounding territories are occupied by other families. In this case, it is recommended to resort to more radical ways struggle.

Mole traps

In cases where there are really a lot of moles, or for some unknown reason it is not possible to get rid of them in simple ways, mole traps will help. These devices in early spring will allow you to catch females ready to breed offspring.

To determine the location for the trap, you need to press down the mole's passage.

Conclusion! If after one or two days the course returns to original form, which means it is active.

Installation in such areas ensures quick capture of the animal. The main passages are often located in straight directions along fences, fences and foundations. The meandering lines are temporary, so setting traps there will not be effective.

Mole traps consist of several elements:

• input ring;
• pressure lever;
• guard ledge;
• alertness itself;
• spring ring.

The frame is made of a piece of steel wire 3.5–4 mm thick. Between the support and pressure zones there is a spring in the form of a spiral of 2.5 turns. The spring should create a pressing action of 4–5 kg and reliably press the animal to the lower area of ​​the entrance ring with a weight of 2–2.5 kg.

Operating principle:

• When preparing the device, the pressure clamp is raised in the upper direction;
• the design provides for the penetration of the mole to a sufficient depth before the mechanism is triggered;
• the animal touches the horn with its head and thereby releases the clamping device.

Over the course of one day, several animals move along the selected path. At the same time, other individuals bypass the captured animal, making a small undermining. Therefore, along the entire path, you can catch a large number of moles at one time.

The main reason for the invasion of animals on garden plots– looseness and fertility of the soil. Due to this, the prevalence of pests is highest. Since they are a favorite food of moles, the latter's colonies can be quite impressive.

All of the above methods have been tested many times by experienced gardeners. The production of some of them does not require financial investment at all. But the result will exceed all expectations, and uninvited guests will quickly disappear from the occupied territory.