Windows perform not only a protective function external factors and weather conditions, but also allow you to create a unified style and interior in the house. Wooden windows are very popular due to their reliability, quality, aesthetic appearance and environmental friendliness. The most important advantage of such windows is the preservation of natural air exchange between the room and the street, which means that the most comfortable microclimate for health will always be maintained in the house. Moreover, they meet all quality standards, having excellent technical and performance characteristics, and in terms of noise and thermal insulation they exceed plastic double glazed windows. Durability wooden windows associated with correct selection and gluing high-quality wood treated with modern equipment and are fully prepared for installation in your home.

Stages of installation of wooden windows

Let's take a step-by-step look at all the processes required for high-quality installation of windows in apartment buildings and private stone cottages.

The first and one of the important processes is the visit of a measurer to correctly and accurately take all dimensions, taking into account not only the basic measurements of the openings, but also the type of walls, their curvature and even the floor, window location. After which the manufacturing process begins according to individual parameters and characteristics.

Dismantling

The second stage begins with the delivery of finished windows and the arrival of installers to your home. After which it begins rough work- dismantling old windows and cleaning the opening from remnants of old insulation and waterproofing layers, removing the window sill, followed by installation of a new window unit.

Preparing the window frame

Preparation window frame consists of gluing the external side, upper and lower parts with a special PSUL tape - a self-expanding polyurethane tape impregnated with modified acrylic, used for hydro and thermal insulation. Installing a window frame, without using PSUL tape, requires a fixed gap with the opening, in order to avoid damage to the integrity of the structure as a result of changes in the size of the frame depending on weather conditions and pressure, which is subsequently filled with sealant.

Installation, fastening and fixing.

The installation process itself begins with vertical and horizontal alignment using building levels. Then the frame is secured in the opening using technological wedges (thrust blocks). Fixation occurs due to powerful dowels or anchor plates.

Sealing seams

When installing wooden windows and doors, in most cases, polyurethane foam is used as insulation, and simple foam. This is very good material as heat and sound insulation and in addition it does not absorb moisture.

The structure of the polyurethane foam is such that it expands quickly when sprayed. However, the foam seam is not intended for fastening the window and therefore the window has a special mechanical fastening in the opening using anchor plates.

As a rule, the installation seam is filled with foam only 2/3, and with its further expansion, the installation space is completely filled. When installed in very dry conditions, for better contact and adhesion of the mounting foam, the surface of the opening is moistened with water. Excess foam is cut off after it has been completely dry. IN winter conditions, this process may take a little longer. All that remains is to remove the excess hardened foam.

Installing a window sill

Mounting wooden window sill carried out using technological wedges. The cavity located under the window sill is filled mineral wool and fixed with foam sealant.

Trust the professionals!

Wooden windows look stylish and beautiful when installed, both in apartment buildings and in private cottages. We are ready to take on any, even the most complex solutions in matters of glazing your home, and make it even more comfortable. Our company that installs wooden windows employs true masters of their craft, competent and qualified specialists, who efficiently carry out each stage of the work on installing window structures, bringing it to the ideal result.

Installing wooden windows is a simple process, but labor-intensive, requiring precision calculations and care. Here's a short guide to follow installation work on your own.

IMPORTANT! Making windows to order is the work of professionals. Before performing any type of work related to ordering or installing a wooden window, consultation with a specialist is required!

Basic installation rules

Rule 1

Before taking measurements, become thoroughly familiar with the window design. Personal experience installation of windows is desirable.

Rule 2

Window measurements are taken from both sides of the window opening: from the room and from the street.

These measurements will be useful for calculating the depth of a quarter of a window opening. The window can be larger, but it should not be smaller than the external parameters of the opening - otherwise the frame may fall out.

Figure 1 - We measure the window on both sides of the window opening: from the room and from the street

Rule 3

Installation of wooden windows can significantly affect the existing parameters of the opening: The opening during installation or dismantling of an old window can be severely skewed. To take into account the possibility of increasing the window opening, the window size must exceed the external measurements by 30-40 mm in width and 15-20 mm in height.

Rule 4

Decide clearly on how the window should look from the street side: completely wall up the window frame into the wall or leave the frame in sight.

In the first case, extreme accuracy in calculations is required, otherwise the edge of the glass unit may go into the wall along with the frame. In the second case, the likelihood of errors and inaccuracies is reduced, and it will be much easier to correct flaws.

Figure 2 - Determining what the window should look like from the street side

Rule 5

To install the ebb on the outside of the window, the lower edge of the window frame must be no lower than the outer edge of the opening. The joint between the ebb and frame is sealed with silicone. The ebb, as well as the window sill, is installed under the window. The installation slope of the window sill should be 3 degrees (according to SNiP).

Figure 3.1 - Installing low tide - WRONG OPTION

Figure 3.2 - Installing low tide - CORRECT OPTION

Figure 3.3 - Installing low tide - PREFERRED OPTION

Rule 6

Compare the calculated window dimensions with the control (internal) dimensions of the window opening.

Figure 4 - Compare the calculated window dimensions with the control (internal) dimensions of the window opening

Rule 7

Ideally, the width of the joint between window frame and the wall should not exceed 3 cm. If necessary, the width of the window frame can be increased by using a set of additional profiles.

Figure 5 - If necessary, the width of the window frame can be increased

Rule 8

Installation of wooden window blocks is traditionally carried out using two methods:

1. fastening through the box;
2. fastening to a metal anchor plate (attached to a plastic lock located on outside window block).

The first technology involves removing sashes and double-glazed windows from the frame for the entire installation period. This way you can fix the window in any opening, and this way you are guaranteed to transfer the load to the internal metal fittings window.

The second method will not leave marks on the end surface of the wood.

Figure 6 - Two methods for installing wooden window units

Installation of wooden window blocks

Progress:

Remove the window from double-glazed windows and hinged sashes.

Carefully align the empty frame using spacer blocks along a vertical plumb line as well as a horizontal level.

Drill holes in the frame itself and the wall around the entire perimeter of the window.

Secure the frame using collet bolts.

Place the double-glazed windows and sashes in place.

We seal the joint between the window and the wall with polyurethane foam.

When performing installation work, consider the following rules:

• All beads to be removed must be marked.
• The window must rest on the lower supporting blocks, which are not removed after installation. The pads should be located close to vertical elements: under vertical partitions in the frame or at the corners of the frame.
• The window should not “hang” on the dowels!
• When setting a window vertically, you only need to use a plumb line with a sharp tip and absolute axial symmetry.
• Do not try to tighten the mounting screws too tightly. Over-tightening may cause the profile to bend.

IMPORTANT! According to GOST, the installation gap between the wall and the frame should not exceed 15-20 mm, depending on the dimensions of the window, and all installation work should be carried out at a temperature not lower than 15 degrees Celsius.

The seams must be filled with polyurethane foam. It is preferable to choose professional gun foam (for example, GoldGun foam from the PENOSIL series or Soudal foam). Working with regular foam (feed through plastic tube) may be inconvenient ( the best option in this category - Ceresit STD TS 61).

During installation, it is also recommended to use mixtures with a neutral pH; mixtures with a quicklime base are prohibited - due to the strong alkaline environment the mixture can corrode not only the layer of varnish or paint on the surface of the window frame, but also damage the wood itself.

See the VIDEO of installing wooden windows below.

Installation of wooden window sills

Installation of wooden window sills is carried out according to the following rules:

• The length of the window sill should not exceed 3 m (longer structures should be assembled from several panels).
• The length of the window sill is calculated using the formula: installation clearance parameters −4 mm length for gaps. This value is calculated on both sides of the window for each meter of length.
• Heating appliances must be at least 8 cm away from the window sill.

Necessary materials:

1. silicone sealant;
2. two-component foam;
3. 1 mounting bracket for every 500 mm of length;
4. combined building mixture with metal terminals.

Work progress:

Clean the landing base.

We try on the canvas and adjust it according to the calculated dimensions.

We plant the canvas on cement screed without fixation with adhesive.

We set the beacons according to the level (remember the mandatory tilt of 3 degrees!).

We install the window sill on the beacons.

When installing a window sill, a waterproofing substrate is used.

The window sill board must be placed under the base of the window, but the edges of the window sill should not lie flush against the window structure.

If installing a wooden window sill with your own hands is more acceptable to you than calling a professional, remember the golden rule: “Measure twice and cut once.”

The window installation process is completed by installing the slopes and fittings.

When purchasing or ordering a wooden window, make sure that its fittings have a quality certificate, and the fittings manufacturer guarantees at least 10 years of service without breakdowns (for example, fittings from ROTO and MACO have such a guarantee). The cost of good fittings, of course, is higher than ordinary Chinese ones, however, the guarantee of reliable service of a window system lies in high-quality fittings and good installation. So the high price of components is completely justified.

A wooden house means comfort, warmth and a special aroma. Today, when the frantic rhythm of a big city is boring, as is the abundance of reinforced concrete, wooden buildings regaining their former popularity. In exchange for numerous advantages and logs, you have to put up with their features. For example, choosing the first plastic windows you come across and installing them using standard technology will not work - a special approach is needed, otherwise there is a risk of replacing the windows in a couple of years, no matter how high quality they are. We'll figure out which windows to choose for a wooden house and how to install them so that they last the period stated by the manufacturer.

No. 1. What kind of windows are installed in wooden houses?

Previously, in wooden houses, as in all others, only wooden windows were installed - there were no other options, but their quality was very different. If the house has old wooden windows in good condition and it would be a pity to dismantle them, then it makes sense to restore them. However, in most cases, the most logical thing to do would be to replace the old windows with new double-glazed windows, and here great difficulties await us. Question for wooden house It is also acute for those who are engaged. You will also have to pay a lot of attention to correct installation window.

The following windows are suitable for a wooden house:

• ordinary wooden;
• wooden euro windows;
• plastic windows.

Look impressive in wooden house windows with decorative layout layout.

No. 6. Features of installing windows in a wooden house

When we're talking about About a wooden house, installation of windows is somewhat more complicated compared to concrete and other houses. The reason is strong tree shrinkage, especially in the first years after the construction of the building. Shrinkage occurs due to the wood losing stored moisture, and the worse the wood has been dried, the more volume it will lose. Over a year, shrinkage can be up to 1.5 cm per meter of height; this process is most active in the first 5 years, then the tree can also change volume, absorbing and releasing moisture. If you install the window according to traditional technology, then in the first year you may not notice any problems, because the layer will compress under the weight of the tree, but then the structure itself will begin to deform, and eventually the glass will crack.

Whatever design is chosen, you will need casing, or pigtail. This required element modern wooden house, which allows you to make the window structure independent of the movement of the walls. The siege does not allow the logs to move in vertical plane in the area where the window opening is located, but does not interfere with the shrinkage and normal breathing of the tree. In addition, the pigtail allows you to further strengthen the wall.

If installed window in wooden frame , then installation can be carried out using simplified technology. It is enough to make a vertical groove in the ends of the logs measuring 5 * 5 cm, insert the corresponding sizes into this groove wooden beam, this will be the casing.

Second option somewhat more complicated, can be used for any type of window. It consists of cutting out a ridge in a log, on which a vertical beam with a groove, called a carriage, is installed. You can make a groove in the log, and a ridge on the carriage. The tongue-and-groove design will allow the log to slide freely without moving vertically. Installation in this case is performed in the following sequence:

Installing a window in a prepared frame comes down to the following steps:

• preparing small (5-10 mm) grooves for attaching the window sill;
• installing the window sill using a level and fastening it with self-tapping screws. Plastic window sill requires the use of a rubber washer. Holes are made in those places that will eventually be covered by the window;
• leveling the window frame and fixing it with anchors, followed by foaming;
• checking the frame for verticality and horizontality, installing double-glazed windows;
• installation of glazing beads, foaming of cracks.

Of course, it is best to entrust the installation of a window in a wooden house to a professional - here you will need knowledge of the intricacies and details on which the durability of the installed structure will depend.

Common plastic structures are actively beginning to give way to wooden counterparts. Installation of wooden windows is gaining popularity, since wood compares favorably with plastic structures environmentally friendly properties and the ability to “breathe”. You can install wooden windows in your house yourself, following the right technology. The installation technique is almost identical to the installation of PVC structures, with the exception of some nuances, which we will discuss below.

Installation work front

To carry out high-quality installation of wooden windows yourself, you need to divide the work into small stages, thanks to which independent housework will turn into success. So:

• we clean the window opening and take accurate measurements;
• install the window in the opening;
• fix the installed structure;
• create isolation;
• adjusting and customizing fittings;
• We are engaged in finishing slopes.

Schematic diagram wooden window installation

The technology of work will be the same regardless of where the installation takes place: be it windows in frame house or apartment. When intending to install windows in a house, it is advisable to complete the main stages of construction in order to avoid additional pollution. By the way, installing wooden windows will be inexpensive. One installation will cost approximately 3 thousand rubles excluding cost Supplies.

Preparing the window opening

To begin with, the window opening is cleared of remnants of previous plaster and other technical residues. When brickwork, in which voids have formed due to destroyed material, it is recommended to eliminate them.

First you need to carefully and thoroughly prepare the window opening

Principle preparatory stage is to adjust to required sizes, which must be carried out with special care, avoiding noticeable errors. All surfaces are cleaned of elements of previous plaster and other residues. Installation of wooden windows in accordance with GOST requires the presence of a gap of a fixed width around the perimeter of the frame, which, upon completion of the alignment of the entire structure inside the openings, is filled with polyurethane foam.

Installation of a wooden window according to GOST requires the presence of gaps between the frame and the opening

It is not recommended to leave excessively large gaps along the edge areas, preferring a width of 10 to 15 mm, so that later the voids can be well foamed. A gap of 40-50 mm is left along the bottom of the window structure. This nuance is necessary for high-quality alignment of windows inside openings. Always remember that before installing windows into openings, the geometry and dimensions are first checked. This step allows us to achieve proper work, excluding possible distortions and disproportion of parts.

Sometimes craftsmen violate technological points by making wall lintels incorrectly, since the window opening is used as formwork with a window walled up inside. Such actions lead to additional financial costs equal to the price of a new structure, because the window frame is placed very tightly between the edges.

If you neglect technological principles installation, the structure will soon require replacement

In extreme cases, complete removal of wooden windows may be necessary. Do not forget the GOST recommendations regarding gaps, then the work is guaranteed to be crowned with success.

End-to-end methodology

When installing wooden windows, the through installation method is often used, which involves the use of dowels. The method is characterized by low cost and relative simplicity, allowing you to install the window yourself. Upon completion of the installation work, the fixed box will be completely motionless inside the window opening and will be reliably protected from the influence of factors external environment.

Through installation of wooden window blocks is simple and inexpensive

The occurrence of accidental distortions is excluded, various kinds displacements and deformations of the structure during installation work. The use of dowels provides strength of fixation, which cannot be achieved with anchor bolts. Since the dowels are presented in the form of a hollow sleeve, it is impossible for the screws to penetrate deep into the wall. Perhaps these are the main advantages of the end-to-end installation system, which make it very popular among installers and customers.

It is worth mentioning the minor advantages. Firstly, installing windows using the end-to-end method will please you with minimal financial costs. Secondly, it will not require special tools, allowing you to get by with a set of existing ones. During the work, you only need to make holes using a drill, secure the dowels and finally attach decorative plastic plugs over the screws.

Holes for dowels are made using a drill

Using the through method, when installing windows you need to pay attention the right choice places where the holes for the dowels will be located. The four-stage cross-section of window profiles allows you to drill holes at an exclusively uniform level. It should be borne in mind that experts strongly do not recommend making holes in different places.

Mounting blocks for window installation

Do-it-yourself installation of wooden windows involves the use of mounting blocks, which makes the process inexpensive and quick to complete. Mainly used pads whose thickness is 50 mm. They are a block of wood impregnated with an antiseptic, which is installed on a waterproofing layer. The arrangement is made exclusively horizontal, running parallel to the upper edge of the window structure. To ensure correct installation actions, you must first free the window frame from frames and other components.

To install windows on blocks, you need a perfectly level opening.

The structure is installed inside the mounting block using laser or simple level, carefully checking the levels on each side. It is advisable to make the top and side gaps the same, leaving 10-20 mm each. The number of pads can be determined using graphic image With possible options placement.

Mount using plates

The plates can be made yourself, although many window manufacturers include them in the package. A simple technique is designed to make the fixation and fastening especially strong. The method is very simple to implement: the plates are screwed with self-tapping screws to the window frame on both sides, placing two of them on the top and two on the bottom.

The plates ensure reliable fixation of the window

If the window exceeds 1.5 meters in height, two additional plates are attached to the center of the product. As the wedging of the body inside the opening is completed, the plates protruding from both sides are secured along the edge of the openings with screws and dowels. Before foaming the seams of a wooden window, the protruding wedges can be pulled out. But it should be borne in mind that subsequently it will be necessary to carry out an additional check to ensure the correct horizontal position of the housing.

There is another simple way to install wooden windows yourself, which is highly reliable and durable, which we will consider further. When installing wooden windows with double-glazed windows or glass, they must be removed, which is very easy to do: carefully separate the glazing beads and carefully pull out the glass.

Installation of the frame using self-tapping screws is carried out without glass - it is installed in last resort

Further along the sides and top inner surface the frame is marked with places for holes followed by drilling. Before you start drilling, be sure to insert the frame into place and carefully level it using a level. Then screw in the screws, taking into account that they can be moved without effort, since the body still needs to be adjusted vertically and horizontally. Finally, a double-glazed window is installed and the structure is cleaned of dirt.

We insulate wooden windows

The correct technology for installing wooden windows ensures minimal thermal conductivity and excellent insulation, protecting the room from humidity and air masses. It is important to take into account that a high degree of the listed characteristics is achieved by the increased cost of the window, since in order to create a high-quality thermal insulation system it is necessary to run it along the entire perimeter of the body. In this case, preference should be given to polyurethane foam for installation, which is easy to buy in most specialized stores.

Thermal insulation of the installed wooden window block is performed using foam

When filling the space with foam, it is necessary to monitor the thickness of the applied layer, which should not extend too far along the edge when expanding. Excess foam will only stain the space and lead to banal overspending. It is also necessary to control the humidity, since water ingress is unacceptable to ensure adhesion and reliability of work.

Even a new recruit will be able to install wooden windows independently and with high quality. The main thing is to follow the basic rules and move step by step, without missing important details.

Every reader of the site knows that no matter what material the windows are made of, they help keep the house warm and emphasize the individuality of any home. Therefore, the installation process should be treated with special attention. After all, even the most expensive and energy-efficient window design loses all its advantages if it is installed incorrectly. In this article, our experts tell you how to properly install windows in a wooden house, frame or stone.

Wooden, stone and frame houses And country houses have a number design features. Since they affect window installation technology, any developer should be aware of them.

From our article you will learn:

• Where does the preparation for installing a window structure begin?
• What stages of work precede the installation process;
• What features should you be aware of in order to install windows in wooden, frame and stone houses;
• How to install a wooden window with your own hands - how its installation differs from the installation of a plastic window;
• How are installation joints protected?
• How to control the installation process.

Preliminary preparation

Despite its apparent simplicity, installing windows at home is a process that requires a serious and responsible approach. After all, the quality of installation directly affects the level of comfort in the home. Here's where the process begins:

Anton Karyavkin Head of the technical center of REHAU, Moscow.

First of all, you need to carefully prepare: read the instructions and existing installation standards, and acquire the appropriate tools.

A professional installer's kit includes about a hundred different “tools”. It is not necessary to have them all, but without the basic kit it will not be possible to install a translucent structure. It includes: a hammer drill, a screwdriver, a foam gun, a chisel, a hammer and screwdrivers.

When choosing tools, you should also take into account that window installation involves a wide range of additional work.

These include:

• Plastering slopes in stone buildings;
• Construction of seams and thermal insulation;
• Installation of window sill and additional components.

The main thing to remember is that the installation technology directly depends on the material of the building walls.

Anatoly Gavrysh Head of the design bureau of the Window Factory company

The type of house significantly influences the window installation procedure. In houses where there is significant shrinkage (most often in wooden houses), a casing floating box with compensation gaps is used. In other types of houses window installation has the same schemes.

Installing wooden windows in a frame house with your own hands.

We install wooden windows with our own hands

Developers believe that between PVC installation There is a big difference between a wooden window and a wooden window, but experts disagree.

Anatoly Gavrysh:

There is practically no difference between installing a plastic and wooden window. The only slight difference is different elements fasteners

Do-it-yourself installation of a wooden window should be done more carefully. And in each case an individual approach is required.

Alexander KorpachevHead of the installation department of the company "Business-M"

Even windows in the same house can have their own characteristics. Therefore, in your work it is necessary to adhere to the recommendations of GOSTs, namely:

• Window installation seams - with vapor-permeable self-expanding tapes;
• Technical specifications, GOST R 52749-2007;
• Assembly seams of units and junctions of window blocks to wall openings;
• Are common technical specifications, GOST 30971-2002;
• Window blocks- from polyvinyl chloride (PVC) profiles. GOST 30674-99.

IN general outline installation consists of the following steps:

• Preparation of the opening;
• Window preparation;
• Installation;
• Finishing work;
• Finishing.

Anatoly Gavrysh

I would like to dispel illusions about the ease of installation of both plastic and . To carry it out yourself, you definitely need certain skills and special equipment, since correct installation is of decisive importance in how high quality and how long new window structures will last.

In detail, the installation of both plastic and wooden windows is done as follows:

1. Window openings are cleaned of dust and dirt.

2. The windows are installed in the opening and wedged with small plastic or wooden corners strictly according to the level.

Corners are necessary to form a gap (margin) between the frame and the opening. Along the perimeter - between the window and the opening, it is recommended to lay a technological gap for foaming 20 mm wide. At the bottom of the window - under the window sill, it is recommended to leave a margin of 35 mm.

3. The structure is fixed.

Fixation is carried out using dowels or special mounting toothed plates. If the window is fastened through with self-tapping screws, then before doing this, holes for the anchors are marked and drilled in the opening. The number of attachment points depends on the size of the window and on average ranges from 40 to 70 cm. From the corners of the frame it is necessary to make a distance of 12 -15 cm.

4. The seams between the window structure and the opening are foamed.

To save foam, if the gap exceeds 40 mm, it can be filled with insulation - polystyrene foam, etc.

5. The foam is covered with steam and waterproofing tapes.

The vapor barrier is glued along the entire perimeter of the window structure with inside(from the room side), and waterproofing film- from the outside, from the street side. After foaming, it is removed from the tape protective strip, and close the foamed seam.

6. Additional elements - flashings and platbands - are installed in their place on the outside (if the installation takes place in wooden houses).

7. The fittings are adjusted.

Features of installing windows in a wooden, frame and stone house

Anton Karyavkin

Installing windows in buildings made of rounded timber is the most difficult. This is due to a design change wooden houses from manufacturer to manufacturer.

If developers, when installing windows in a wooden house, use different breeds wood, it is almost impossible to predict the behavior of the material - every time you have to study everything from scratch. The deformation of logs in such buildings can be quite large: from 8 to 15 cm. The house shrinks, so not a single window in such conditions can remain operational for a long time.

Correct windows in a wooden house.

Here's what we can do to protect the structure from possible deformations caused by shrinkage of the walls, using the old carpentry method:

Anton Karyavkin

The most responsible developers begin to cut an opening in timber walls only a year or even two after the construction of the house. During this time, it is possible to track all deformations, taking into account the characteristics of the material and the climatic characteristics of the region.

After the opening is cut, a rough frame, also known as a “frame” or “casing”, is inserted into it, into which the window structure can then be laid.

Alexander Korpachev

In all wooden houses, when installing windows, it is necessary to use a casing or frame - a wooden box that levels the load on the frame.

Between top part window opening and the box usually leaves a technological margin of 30 to 70 mm. After installation, the stock is filled with insulation and covered with platbands on both sides.

Anton Karyavkin

The box is made from wooden blocks 50-80 mm thick.

Despite the fact that the box absorbs the deformations of the logs quite effectively, the installation joints in this type of building still remain movable. Here it is important to choose the right mounting foam - it should not collapse when the walls shrink. Such correct foam can be found on the market, but it is relatively expensive. Therefore, experts often replace it with other materials, mainly of plant origin (tow). Of course, tape and coating materials necessary for protection assembly seams, must also have a high class of deformation resistance.

Glued laminated timber shrinks significantly less than solid logs. Eventually laminated veneer lumber deforms less than a regular log.

But it is still difficult to install windows in a wooden house with your own hands.

How to install a window in a frame house

Wooden windows can also be installed in a frame house, but plastic windows are most often used. Control of the installation of any windows at all stages should be checked using a level or plumb line, and the horizontal and vertical deviation should not exceed 1.5 mm per meter.

Anton Karyavkin

The process of installing windows in a frame house is much simpler than in a wooden one. You will still have to deal with deformations of the window opening, but they are no longer so significant.

It is better to use as a fastener anchor plates. Installation with construction screws is not recommended: they secure the frame, and deformation of the wood, in turn, can cause damage to the windows.

How to install a window in a frame house

It is important to remember that when installing a plastic window in a framed room, it is necessary to wrap it in window hole. This is necessary in order to connect the window vapor barrier circuit with the room vapor barrier circuit.

Brick different types, concrete, aerated concrete blocks- these are standard Construction Materials. The technique in stone houses has been worked out for years. Fastening is carried out using dowels and construction screws; the use of anchor plates is also allowed.

Anton Karyavkin

In some cases, installation technology may be influenced design solutions, requiring to take into account linear dimensions structures and wind load in the region.

Protection of installation joints and stages of control of installation work