Minecraft is full various instruments and built-in functions that open up wide possibilities for the player. One of these moments is the presence of a command block in the game.
Many gamers are interested in how to get command block in Minecraft. The answer to this question will be discussed below.
Command block
To issue yourself a command block, use commands.This is an object for executing commands. Used directly to create special mechanisms. Acts on command after receiving a redstone signal. By solving the question of how to give yourself a block in Minecraft, you can significantly expand the in-game capabilities.
It is especially appreciated by map creators in adventure mode, and also in cases where it is necessary to create private territories. To use an object and enter a command into it, you will need to right-click on it. In the help section the player can find a complete list of commands.
It is not possible to craft a command block in the game. Also, it cannot be found in the vastness of the game world. Obtaining a command object is possible by contacting the server administrator.
In the case of a single player game, you will need to use special cheat commands. Accordingly, before starting the game, you must enable the ability to use cheats in the main menu.
Commands on how to issue yourself a command block in Minecraft:
- /give @p command_block;
- /give * command_block, where * is the player's nickname.
Like other blocks, this one stores NBT type data. If desired, you can copy it along with all the parameters and the command itself.
Invisible block
The invisible block has the same capabilities as the others. There are invisible blocks in Minecraft. They open up new possibilities for both construction and adventure.
When solving the question of how to give an invisible block in Minecraft, you will need to use the /give barrier command. The object is considered complete, with all the properties and characteristics of any other block.
Peculiarities:
- Convenient for attaching glass to it during the construction of buildings.
- Easily destroyed.
- You can jump on it and install other blocks.
- Does not pose a barrier to projectiles.
To see the invisible block, you will need special glasses.
Video: How to give yourself a command block in Minecraft.
The same commands as in regular chat. What is a command block, how to get it and how to use it? In this article we will tell you about it!
This is really a very useful block and it expands the possibilities of creating maps in Minecraft
Full list commands you can find on, but not all of them work in Minecraft on Android, IOS and Windows 10 versions.
Last time we explained the positioning system and its associated commands and arguments. Just making game cards is why people usually want to learn how to use command blocks. If you're here for this reason, you can look forward to other lessons that will focus on mapping. First, we will add knowledge about the missing arguments.
Next argument. This argument, as you might, returns "type" and "object type", in other words, which object is involved. You can also use the prefix "!" to make a selection of other types of objects. Let's now try what we just learned. Find our two pigs closest to you.
+ command blocks in MCPE:
- Unlike the PC version, in PE command blocks do not place heavy loads, i.e. FPS will be stable.
- The command block interface is adapted for mobile devices.
- Too little functionality.
In the game, you cannot get a command block by crafting, but you can issue it using the command /give Steve command_block, Where Steve nickname of the player to whom the team will give this block. Instead of Steve, you can also use @p, meaning you give the block to yourself. Don't forget to enable cheats in the world settings.
How to enter a command into a command block?
To do this, you need to open its interface. This is done very easily, just tap on it. In field Entering a command The command block itself fits in, which the command block will execute. Just below is a field where you can see an error if you entered something wrong.
Or if you are making a selection of all objects but don't want the player. These arguments represent "experience levels" or the number of "levels" of experience that is "green" that you use for the enchantment. The current level is displayed above the active inventory with a green number. So let's write a simple alert script that will let players know how this is happening. You will need two command blocks to connect to the clock. The only problem is that the script will spam chat players every time the circuit is completed, see how to deal with it in the scoreboard system tutorial.
Example commands:
- give @p apple 5 - gives the player five apples.
- setblock ~ ~+1 ~ wool - places a block of wool at the player's coordinates.
- tp Player 48 41 14 - moves a player with the nickname Player to a point at coordinates x=48, y=41, z=14
Thanks to pointers, you can point to the player or creature on whom the command will be executed:
- @p is the player who activated the command.
- @a - all players.
- @r is a random player.
- @e - all entities (including mobs).
How can I make it so that, for example, it moves all the players to some point except itself? Yes, it’s easy, for this you need to use additional pointers, for example: tp @a 228 811 381- teleports all players except the player with the nickname Admin exactly x=228, y=811, z=381. All parameters:
- x - coordinate along the X axis. If you put instead of the value ~
- y - coordinate along the Y axis. If you put instead of the value ~
- z - coordinate along the Z axis. If you put instead of the value ~ , then the dot will be the command block.
- r - maximum search radius.
- rm - minimum search radius.
- m - game mode.
- l - maximum experience level.
- lm - minimum experience level.
- name - player's nickname.
- c is an additional argument to @a that limits the number of players to execute the command. For example, if you enter @a, the command will affect the first five players from the list, @a will affect the last five from the list.
- type - as an example, the command /kill @e will kill all skeletons, and the command /kill @e will kill all non-player entities.
- give @p gold_ingot 20 - gives the nearest player who is within a radius of 10 blocks 20 gold bars.
Commands for manipulating the world
However, this is a real scenario where you can invent thousands of people with the right knowledge. Now you can imagine the commands used to manipulate the world, which will be useful for you, for example, when you create a playable map yourself or simply when you want to adapt a test world.
You set this mode by default when you create a world, it's creative. Try to change it now to survival. When a new player joins the world, the game mode will be set to survival. As you can guess, this command changes the difficulty. There are four in the game, and you can specify them in different ways.
Command block modes
There are three command block modes available: pulse, chain, and repeat - the color of the block changes depending on the mode.- Pulse mode (orange): activates the specified command
- Chain mode (green): the command will work if the block is attached to another command block and connects to other command blocks
- Repeat mode (blue): The command is repeated every tick as long as the block has power.
The difficulty is saved for each world separately, so if you go into settings you will see the difficulty of the last world loaded. As you know, difficulty can be "locked" for of this world, which makes it impossible to change it. However this command doesn't look at locking so it is not 100% secure, however when cheats are disabled a player in a locked world cannot change it. If the command is run on the server, the difficulty changes, but the next time the server starts it will again be the server default because it is set by the server properties at startup time.
Pulse mode
These are ordinary command blocks that are used to interact with chain blocks, but you can simply execute commands in these blocks.
Chain mode
I think it’s already clear from the name that this command block mode works according to the “chain” scheme.
Please note that for the chain type to work, you need a command block with a pulse, which will send the signal, as well as a red stone block, without which the command block with the chain type will not work.
You can make this command one of the few when cheats are disabled. It has no arguments and displays the seed of the world where it is. This number tells the world generator “how to generate it”, i.e. two newly created worlds with the same seed will look the same. This number can be entered when creating a world.
If it's raining, stops, and if not, starts. The first required argument is the weather condition for setting the command. Clearly, rain does not mean rain means thunderstorm rain means rain and beating.
- If the flash hits a vine, it charges it.
- If he hits a pig, he will make Pigman.
Team title and its parameters:
- title clear - clears messages from the player's screen.
- title reset - clears messages from the player screen and resets options.
- title title - the title that shows the text on the screen.
- title subtitle - a subtitle that is displayed when the title appears.
- title actionbar - displays a caption above the inventory.
- title times - appearance, delay and disappearance of text. The default values are: 10 (0.5 s), 70 (3.5 s) and 20 (1 s).
- title @a title §6Start - title with orange color.
- title @a actionbar Hello! - displays text above the inventory.
- title @a subtitle Chapter 1 - subtitle.
Also known as Boss Update, is the addition of slash commands. What are slash commands, you ask? If you've played the PC version of the game, you probably know they're there. In the chat window, you must type a slash (/) and then enter a command.
So let's try to turn on the storm now. If you play in desert biomes like I do, you'll only see cloudy skies but no rain or lightning. This is because each biomass has its own temperature, which determines whether it rains, snows, or nothing at all.
Either execute only the command, then the location is set in accordance with the coordinator of the performer or enter the coordinates. As you may have encountered, this personal spawn point is always set next to the bed you sleep in - upon death, you will end up at your base, not your starting point. If you want to install your own point appearing where you are now, you don't need to provide any arguments. When you set it on another player, but you don't need to specify the coordinates at the point where you are currently located.
Slash commands in 0.15.9/0.16.0
Teams provide the player with an incredible amount functionality on the PC version of Minecraft. The beta version of Pocket Edition 0.15.9/0.16.0 is currently available. We got our hands on the beta and here are the commands we found.
/clearfixedinv- Completely clears the specified player's inventory or only removes objects specified by ID from it.
Otherwise, the command requires a complete specification. Use this command to determine the number of hours. The query command tells you how much time has passed since a certain point. This can also be seen in the debug screen. . You probably have a few more questions about exactly how platform-wide convergence should shake out.
Q: Is the best update available for all editions? If there are platforms you're interested in where we haven't been yet, please let us know. Question: Is the child safe update better for children? We're not quite ready to announce a release date yet, but we're aiming for a release this year. Question: What is the best way to update the redemption process for disc owners?
/clone [mode] [mode2]- Clone the area from point 1 (x1 y1 z1) to point 2 (x2 y2 z2) to point 3 (x3 y3 z3) using mode (mode) and sub mode (mode2). Mode (mode) can have 3 values: replace, masked and filtered, and sub mode (mode2) can be normal, force or move.
/deop- Removes operator privileges from the player.
/execute - Executes a given command regarding an entity. Relative coordinates are specified by the x, y and z parameters. If the detect parameter is specified, then the specified command is triggered only if there is a block with the specified ID and metadata at coordinates x2,y2,z2.
Please be prepared for a short wait though as it may take several days to process all redemption requests. Question: What's the deal with the five hour requirement? When you launch it, you will see the name of the game on the splash screen. This is very interesting work, but presents many challenges to the development process. You can continue playing the old version of the console to continue earning what you missed.
Will they translate to the new console version? Q: Are DLC added to the console editions? Q: When will console players be able to use custom skins or create custom super flat and boosted worlds? The server browser has a list of verified servers that you can join with one click.
/fill [Block parameters] [Replacement method]- Fills the selected area from to with blocks with block parameters [Block Parameters] using the replacement method [Replacement Method] p.
Replacement methods:
- keep - will only replace air blocks
- hollow - creates a cube with nothing inside
- outline - identical to hollow, except that this replacement method will leave the interior unchanged
- destroy - will replace all blocks in the specified area with the ability to pick them up as drops
- replace - will replace all blocks in the specified area
There is also Alternative option command that only works with the replace method:
fill replace
It requires large quantity administrative and backend functions so they can focus on creating and maintaining great online communities. Q: How do potential server partners begin to embrace the server browser? While we have three servers at launch, we plan to introduce more servers to the game over time.
Over time we plan to add more servers. Q: Why did you choose these partners over others? On consoles, platform restrictions limit server access to partner servers only. Will the studio stop updating the game because new gameplay and mini-games are available through the servers? Q: How to play mini-games from old version console?
Translation of parameters:
- TileName - name of the new block
- dataValue - parameters of the new block
- replaceTileName - name of the block that needs to be replaced
- replaceDataValue - parameters of the block that needs to be replaced
/gamemode [target]- Changes the game mode for a specific player. Survival (survival, s or 0), Creativity (creative, c or 1), Adventure (adventure, a or 2), Observation (spectator, sp or 3).
Q: Will you invite links for all platforms? Q: Are the servers safe for my children? Our official server partners have also taken steps to ensure safe and easy online play for all ages, including chat filtering, in-game reporting, and moderation at all times.
Parents can disable chat, allowing children to join servers but not see or participate in any on-server communications with other players. Parents can limit multiplayer to only "friends" or "none", which prevents children from connecting to servers at all. Q: What should I do if someone is bullying me?
If the player's nickname is not specified, the command will change the game mode for the one who entered it. For the command to work, the player must be online.
/give [quantity] [ Additional Information] - Gives the player a certain item/block in the specified quantity according to data numbering.
For example, if you enter /give John 4, it will give the player with the nickname John 1 block of cobblestone, /give John 35 64 11 (will give a full stack of blue wool, /give John 278 1 1000 - damaged by 1000 units diamond pickaxe, and /give John 373 10 8193 will give 10 vials of regeneration potion.
/help [page | command] or/? [page | team]- Displays a list of all available console commands. The list is divided into pages, so the command can take a page number as an argument. You can also display help for a specific command. Some commands are not included in the help.
/kill [player]- Kills the player, inflicting about 3.4x1038 points of damage, with effects similar to Void damage (armor is ignored). Useful if the player is lost, stuck, or starving (if the player can easily find things after death). Works in Creativity mode.
/list- Displays a list of all players connected to the server.
/msg
/op - Gives the specified player operator privileges.
/say - Shows all players on the server your message.
/setblock [Extra options ]- Places a block at specified coordinates. For example, the command /setblock ~ ~1 ~ minecraft:stone will place a stone above the player who called the command.
/setfixedinvslot- Adds a slot to the inventory on the right
/setworldspawn - Sets the spawn point for the entire world according to the player’s coordinates or those specified in the command syntax. Example: /setworldspawn 50 74 -87
/spawnpoint [target]- Sets the spawn point for the player. If no player is specified, the command is executed for the player who typed the command. If coordinates are not specified, the spawn point is set to the current position.
/summon [coordinates] [additional parameters]- Spawns the specified entity at coordinates with the specified parameters. If coordinates are not specified, the player's current position will serve as the spawn point. For example: /summon Pig ~ ~ ~ (Saddle:1,CustomName:"Mr. Pig",CustomNameVisible:1).
This command will create a pig with a saddle and the name Mr. Pig. The name can be seen even through the walls. If CustomNameVisible is zero, then the nickname is visible only if the crosshair is aimed at the mob.
/teleport - Teleports the entity to x, y, z coordinates. The x and z values must be between 30000000 and -30000000, and the y values must be between -4096 and 4096.
Use the y-angle for horizontal rotation (180 North, 0 South, 90 West, and -90 East) and the x-angle for vertical rotation (-90 up, 90 down).
/tell - Sends a private message to the player.
/testforblock [Add. options]- Checks for the presence of a block on the coordinates, and if it is present there, the comparator will output a signal. You can also use this command to check for items in chests.
/testforblocks [Mode]-Checks the coincidence of two areas and if both areas are identical, the comparator will output a signal. The “mode” section can take the values masked or all; with masked, air is not taken into account.
/time add - Adds the specified value to the current time of day. The number parameter can take non-negative integer values.
/time query
- daytime – Displays the number of game ticks that have passed since dawn
- gametime – Displays the age of the world in game ticks
- day – Displays the number of elapsed game days
/time set - Sets the time of day. The number parameter can take integer values in the range from 0 to 24000. 0 is dawn, 6000 is noon, 12000 is sunset, and 18000 is midnight (that is, the hours are divided in half). day is equivalent to 1000 (dawn) and night - 13000 (sunset).
/toggledownfall- Precipitation switch.
/tp - Teleports the first player to the second, that is, “player1” to “player2”
/w - Sends a private message to another player. Used on servers to write something to another player without others seeing.
/xp - Gives the specified player a certain amount of experience points, valid values from 0 to 2,147,483,647. If you enter l after the number, the specified number of levels will be added. In addition, levels can be lowered, for example -10l will reduce the player's level by 10.
Today we will talk about what a command block is in Minecraft, how to get it, why it is needed and how, where and what it can be used for.
What are command blocks?
In Minecraft, a command block (CB) can automatically execute certain console commands as long as it is activated by a red stone.
They work in adventure mode, and allow map creators to improve interaction with the player. In this case, the player is not able to destroy blocks and build new ones.
In Survival mode, command blocks cannot be interacted with or destroyed.
They cannot be created through crafting, and they cannot be found in the inventory when playing in creative mode. Creative mode players and server administrators can use console command"give" to receive KB or make it available to other players. It looks like this:
/give minecraft:command_block
When typing the command, remove the parentheses around the player name and number:
/give atombox minecraft:command_block 1
KB has a graphical interface with a text field, accessible by right-clicking the mouse.
Only players in creative mode and players with administrator status on the server can place command blocks, enter commands and save changes.
For their use in single player or multiplayer worlds, you must enable LAN mode and enable cheats.
Where are command blocks used?
Have you ever played on adventure maps where it's always night, or where the weather never changes? You may have downloaded maps where players receive special rewards, upgrades, or experience by pressing a button or completing a task. All this becomes possible thanks to KB. When creating your Minecraft map, you need command blocks if:
- Do you want constant day or night;
- Do you want to change the weather;
- Do you want to change the difficulty of the game;
- You want to produce a specific sound;
- You want to send a message to the player;
- You want to teleport to another location;
- You want to give players items.
There are many videos on YouTube describing a variety of Minecraft maps. Multiplayer maps are especially popular. There are many categories of Minecraft maps available for download that use command blocks to enhance the player's experience. There are many reasons for map developers to use them. Among them are cards of the following categories:
- Adventure cards;
- Parkour maps;
- Puzzle cards;
- Survival cards;
Adventure cards are focused on the plot, and the gamer acts as the main character of the story. Previously, adventure maps relied on telling a story through signs and books, but now the storytelling is available through dialogue and sounds, all thanks to KB.
Parkour maps force the player to get from one end of the world to the other with a minimum number of deaths. They often contain incredible jumps and other deadly obstacles. Command blocks make it possible to set character spawn points in front of complex obstacles.
Puzzle cards emphasize problem-solving skills by introducing mazes, traps, and other challenges. Some of these cards have a plot, just like adventure cards. Using KB allows such maps to more easily suggest directions, story-related dialogue, and sounds.
Survival Cards may focus on survival in single player or multiplayer, or include a story along the way. KBs can give players a starting spawn point as well as story-related information. The possibilities here are endless.
How to use a command block
Installing them is easier than most Minecraft players think. The commands can be confusing, but some of them (like setting the time of day) are very simple to program. Big projects You can plan later, but first try to master the basics of placing, configuring and using KB.
Remember that command blocks can only appear in creative game mode. To switch to it, you need the appropriate privileges on the server (if available) or activated cheats.
In the chat field, type "/gamemode c", "/gamemode creative" or "/gamemode 1" without quotes.
2. Right-click on the command block
In creative mode, to access a command block, right-click on it. To generate it, you need to use the “give” command, as described above in the text:
/give minecraft:command_block
Command blocks only work when connected to electrical circuit red stone (by the way, there is good mod, allowing to increase the distance of energy transmission). Right-clicking opens a dialog box where you can enter a server command. Maximum length commands can be 254 characters long.
3. Enter the command and click "Done"
When you enter a command into a block, you need to indicate which player it is directed at. This can be done by entering the player's name or selecting three different variables: "@p" (nearest player), "@r" (random player) or "@a" (all players). These variables are especially useful in situations where the player activating the command is unknown. After specifying the command, click “Done” to save it.
Remember that one KB can only execute one command!
Practical use cases
The following examples are simple and practical command block applications in single and multiplayer in Minecraft worlds.
How to change the rules of the game
Game Rules are a relatively new feature that allows players and command blocks to change certain basic settings in the Minecraft world. There are nine described game rules that can be controlled using the command block on the map.
Game rules can be used to create a constant daylight or darkness, disable mob spawning, item drops from mobs, and much more. When entering the "gamerule" command, use the following command:
| Game rule | Effect of the rule |
| commandBlockOutput | Enables/disables text input in KB |
| doDaylightCycle | Enables/disables day/night cycle |
| doFireTrick | Enables/disables fire propagation/disappearance |
| doMobLoot | Enables/disables item drops from mobs |
| doMobSpawning | Enables/disables mob spawning |
| doTileDrops | Enables/disables items falling out of the KB when they are destroyed |
| keepInventory | Enables/disables saving items in the inventory after the death of a player |
| mobGriefing | Enables/disables destruction of KB by creepers or edge wanderers |
| naturalRegeneration | Enables/disables health regeneration for players |
How to set the weather
Some cards use dark theme, which goes perfectly with rainy weather or thunder, while others are better played with clear skies. There are many options for controlling the weather using command blocks. A simple example of a weather command:
In this case, the word input can be replaced with “clear” (clear), “rain” (rain) or “thunder” (thunder).
You can connect a button or lever to the command block to manually switch the weather, or create automatic circuit red stone for constant weather switching. This is easily achieved by using repeaters, a button and a building block.
How to set the spawn point
Spawn points are an important component many Minecraft maps, including adventure, parkour maps, puzzles and others. Having to replay the map from the very beginning every time you die is extremely annoying. Using the “spawnpoint” command, you can save your game progress and be reborn after death at the nearest completed checkpoint. The command looks like this:
By connecting a command block to a building block with a button or pressure plate, players can set a spawn point at the location of the command block.
If you need something more complicated, you can add coordinates to the command to specify the location of the spawn point.
Running from one place to another is tiring, especially on a multiplayer server. Using the “teleport” command, players can move to specific coordinates in the Minecraft world or to the locations of other players. Enter in the command block:
With them you can have a certain set of coordinates for teleporting the player, like the location of the next part of the adventure map.
If the block is not intended for a specific player, "@p" can be used to select the closest player.
If you're on a multiplayer server, you can bind the command block to yourself by using your Minecraft username.
These are just a few options for using command blocks in single-player and multiplayer Minecraft games. There are many significantly more complex commands and redstone schemes that map makers use.
The execution of any actions assigned by the game participants is carried out by command blocks. You won't be able to create a team like this while playing in survival mode. Summoning them as tools while using creative game mode will not work either. To functionally obtain such blocks, it is necessary to apply a pair of sufficient simple commands, which, in fact, will allow their call to be fulfilled. Let's look at a few simple methods.
Get a Command Block in Minecraft: Method 1
Launch Minecraft and select single player mode. Create a world with cheats enabled.
Open the chat window and press the “/” key. This symbol will open a window in which you can enter commands.
Enter the destination you need by selecting from the following lines:
- “/give” the name of minecraft:command_block and the required number - after entering it into the console, the summoned items will appear among the tools;
- “/setblock x y z minecraft:command_block” – this line turns one of the blocks into another, making it a command block, and to find it, you need to press F3 and select one of the found ones;
- “/summon Item x y z (Item: (id:minecraft:command_block, Count:1))” – by entering this sequence, the game participant will summon blocks where he needs them.
Get a Command Block in Minecraft: Method 2
Launch the game, select single player mode. Log in to an existing world, perhaps it will be a server. Enter the chat required to set commands by clicking on “/”.
Enter one of the suggested options:
- “/give name minecraft:command_block required number” – this line allows you to summon the required number of items and add them to your existing inventory;
- “/setblock x y z minecraft:command_block” – if you enter this text, you can replace any existing block with a command block, and to determine the location where it is located, you need to press the F3 key;
- “/summon Item x y z (Item: (id:minecraft:command_block, Count:1))” – blocks will appear in the specified area.
Get a Command Block in Minecraft: Method 3
- Using the "E" key, drag the block and place it on the panel. Click on the right mouse button and place the item on the ground.
- Click on it again with the same mouse button. This will open a menu where you can configure actions.
- In this window you need to enter the symbol “/”. The options in these blocks are similar to those used in chat. They are sometimes connected to an electrical board. This allows commands to be executed automatically.
- Press the “/” key, a console window will appear in which write the word “help”. After it, type the name of the item to which the sequence of commands is prescribed.
You probably know about the existence of commands for working with blocks in Minecraft, but you don’t know exactly how to use them. And if you are a map builder, then I think this will be very, very useful to you! Well, let's finally get started.
Let's take a closer look at this command:
X,Y,Z - coordinates of the place where the block will be installed or changed
TileName is the name of the block, that is, its ID, it should look like this:
minecraft:Block name (in small letters only)
Example: minecraft:wool or minecraft:iron_block
DataValue - block type, that is, wool color, clay color, sandstone type, etc.
Example: 15 - coat type, that is, black color
What it should look like: minecraft:wool 15
OldBlockHandling is a new syntax, it comes in three types:
keep - checks whether there is a block at the specified coordinates; if there is already a block there, then this syntax does not
will allow you to place the specified block at this location.
Example: /setblock ~ ~1 ~ minecraft:wool 15 keep
destroy - if there is a block at the specified coordinates, then it breaks it (with particle animation and sound)
Example: /setblock ~ ~1 ~ minecraft:wool 15 destroy
replace - simply replaces the block at the specified coordinates
Example: /setblock ~ ~1 ~ minecraft:wool 15 replace
DataTag - block or item tags, that is:
We want to install a command block in which some command will already be written, how to do this:
We write a command to install the block and add it to it (tags are indicated by the following brackets ()) (Command:
/setblock ~ ~1 ~ minecraft:command_block 0 Syntax(For example:replace) (Command:/say @p Ololo)
And when the command block is installed, it will contain this command.
Let me give you another example:
We want to set the chest to contain some item or items, for this there is an items tag, to it
You can also add an enchantment tag, but more on that in another part of the tutorial.
The items tag has 4 parameters:
Id - item id
Count - number of items
Slot - the slot into which the item or items will fit
Damage - a parameter that indicates how damaged the item is
How to do it all:
/setblock ~ ~1 ~ (id of the block this item will fit in) 0 replace (items:
[(id:276,Count:1,Slot:0,Damage:50)])
We receive a chest containing 1 diamond sword, which is damaged by 50.
If you don't know what the ~ sign means, I'll explain now:
This is a coordinate sign, if you wrote this sign, then the block will take the same coordinate where the command block is located.
If you add a number, it will move the block by the specified number of blocks:
/setblock ~2 ~2 ~-2 minecraft:iron_block 0
The block will move from the command block (or from the player, if you write a command in chat) 2 blocks up, 2 blocks forward, 2 blocks to the right, well, I think you can figure it out.
This concludes my first guide. Good luck to all! And wait for the second part of the guide!
After you have received the command block, place it on the ground and right-click on it. You will have a menu and a line where it says “Console Command”. We will enter all the commands into this line!
But before we enter the command, we need to understand some words that you see below!
These are commands, with the help of them you designate who will receive an effect, things or something else!
For example, you want to give a friend a diamond bib, to give it you need to write in the command block:
How to change the difficulty in the game. To change it you need to enter the command in the console:
- /difficulty [Difficulty]
Difficulty can be: peaceful, hard, easy, normal.
This way you can change the difficulty in the game!
There is another very important command, how to clear your inventory, this command can be used on the server!
- /clear [to]
You can choose whether to clear the inventory of nearby players [@p], or register a nickname!
How to make a command block in Minecraft?
The command block did not appear in Minecraft right away. Only in version 1.4 do players have new opportunities. It is in this version of Minecraft that users will learn what a command block is, which is closely related to console commands.
What is a command block
Actually, a command block is a block in which players write certain commands. The command block can be opened by clicking on it with the mouse. After which a field will appear in which commands to be executed are written. Information about the result of the entered commands will be displayed below.
How to make a command block
Unfortunately, an ordinary user cannot make a command block in Minecraft himself, despite the player’s great desire, because with the help of a command block in the virtual world you can completely control the map and chat with all players at the same time. You cannot make a command block yourself, you can only receive it. There are several options for how to obtain a command block.
Teams
In order to get a complete list of commands that can be written in the command block, just enter the word help in the chat window.
By entering these commands you will get the required result:
- give @p iron_ingot 10 - 10 iron ingots
- setblock 42 21 60 wool - set the block at coordinates x=42, y=21, z=60
- tp Player 42 21 60 - teleport to a point with coordinates x=42, y=21, z=60
You can also use pointers to players:
- @p - closest player;
- @a - all players;
- @r - random player;
- @e - all entities.
- x - X coordinate of the search center;
- y - Y coordinate of the search center;
- z - Z coordinate of the search center;
- r - maximum value of the search radius;
- rm - minimum value of the search radius;
- m - game mode;
- l - maximum amount player experience;
- lm - the minimum amount of experience a player has.
When creating any playable map that will differ from randomly generated areas, construction, pixel art or story scenarios, the server administrator cannot do without using the “built-in” functions. To implement them, you can use a command block. This is a special device in which you can record a system command, starting from the player receiving a resource and ending with his teleportation to a specified location. But how do you issue yourself a command block?
Warning
There are only two ways to purchase this item. Both of them are that you will need to use system commands. This comes from the fact that it is impossible to make (craft) with improvised materials. That is why the question: “How to issue a command block to yourself?” - remains relevant always. No matter what mods you set for yourself, no matter how you experiment with the ingredients, nothing will work out for you. Anyone who claims that by downloading his mod you will be able to create command blocks is a scammer who is trying to plant a virus on you. So how do you issue yourself a command block?
Methods
The first method of obtaining a command block is that you can create a map in creative mode. The Command Block will be available for purchase among other items.
The second method is a little more complicated. To do this, you will have to use How to issue yourself a command block using the system? To do this, you will have to open the chat and write the following: /give [name:command_block [number]. This command will also be the answer to the question of how to give it to another player.
All syntax is written without parentheses. Instead of the character's name, you must indicate the nickname of the desired player, the number is the number of command blocks received. By the way, the main condition for this command to work is permission to use cheats. If this feature is disabled, you will not receive this item in either single or multiplayer games.
Application
So, let's say you figured out how to give yourself a command block, and it's in your inventory. Now let's learn how to use it.
To place a block on the ground, drag it to the quick access panel. After that, select it and click on the desired place. At this moment, a control interface will open in front of you, with which we will enter the function. It is worth considering that one command block can execute only one instruction.
However, it is not always necessary for the player to be able to find a command block and use it. It is much more interesting for the user to be able to press a lever and a mountain of gold or necessary items. In this case, you can use redstone circuits.
Teams
In order to use a command block, it is not enough to know how to obtain or install it. The most important thing is to be able to correctly write the instruction syntax. To do this, it is important to remember a few simple rules.
- First the command itself is written. Any function that can be activated using the console can be written here.
- Then the “area of application” is set. That is, the player to whom the effect or coordinates of the appearance of the item will be applied.
- And finally, additional arguments that allow you to clarify the characteristics of the object.
In general, the command will look like this.
/[command] [player nickname or coordinates] [parameters]
To make it clearer, let's give a few real examples. Let's start with how to issue items with a command block.
/give @p iron_ingot 30
Using this instruction, the command block will give the nearest player within a radius of 10 blocks iron ingots - 30 pieces. Now let's see how to work with coordinates.
/spawn 10 20 30 /summon EnderDragon
Actually, from the syntax it is already clear that the command summons a dragon at certain coordinates. Finally, note that the full list of commands used by the command block can be seen by entering /help in the chat.
In this material we will look at how to give yourself a command block in Minecraft. When creating a map that differs from the generated areas, construction or creating story scenarios, no server administrator can do without using the built-in functions. The command block allows you to implement them. It's about O special device, on which you can save a system command, such as the player receiving a resource or teleporting to a specific location.
Warning
Next, we will look in detail at how to issue a command block to ourselves. There are two ways to obtain this item. Both will require the use of system commands. This situation is due to the fact that it is impossible to craft a command block with improvised materials. But the problem still has a solution.
Methods
Let's move on to the practical part of solving the question of how to issue a command block to yourself. The command that will allow you to do this will be given below. The first method comes down to creating a map in the "creativity" mode. In this case, the command block is available among other items. That's not all. Let's move on to the next way to solve the question of how to issue yourself a command block. In this case, you will have to use the console command.
So, let's open the chat. Enter the following command: /give (name) command_block (quantity). Thanks to this solution, you can not only personally receive the necessary element, but also give it to another user. All syntax is specified without parentheses. By the way, the main condition for the operation of such a command is permission to use cheats. If the corresponding option is disabled, you will not be able to obtain the specified item in either multiplayer or single-player games. To place a block on the ground, you only need to perform one action. Move it to the Quick Access Toolbar. Next, select the block and indicate the appropriate location. At this point, the control interface will appear, allowing you to enter the function.
Teams
It's not enough to know how to issue yourself a command block. You need to learn how to use it. To do this, you must specify the instruction syntax correctly. Here are the basic rules. First, the command itself is indicated. We enter any function activated using the console. Next, the “area of application” is indicated. That is, the user to whom it is necessary to add the ability or the coordinates of the appearance of the object.
Finally, we move on to additional arguments. They allow you to clarify various characteristics object. The finished combination is indicated according to the following scheme: /(team) (coordinates or player nickname) (parameters). Let's look at how to issue a command block and manage it using examples. Let's start with issuing items.
Enter /give @p. Using this instruction, our command block will give out 30 iron ingots to the nearest player within a radius of ten blocks. Now let's give an example of working with coordinates. Enter /spawn 10 20 30 /summon EnderDragon. From the syntax it is obvious that the command summons a dragon at certain coordinates. We will get a complete list of the functions that the command block has if we enter the /help command into the chat.
