By making an indoor fountain with your own hands at home, you can not only save a fairly large amount of money, but also purchase useful decoration interior According to the Chinese teachings of Feng Shui, the symbol of Water, placed in the northwestern part of the home, ensures prosperity in the family. An excellent embodiment of the moving element in the house can be a babbling brook, a cascade of waterfalls or another form of fountain.

Small decorative cascades for interior decoration should be made taking into account the fact that there is nowhere to drain the constantly rising water at home. This means that the amount of liquid in the system must be constant. To comply with this requirement, the fountain installed in the room must be made to operate in a closed cycle. In this case, water will collect in storage capacity. The pump installed in the system must raise it to top point structures from where the liquid will flow out, again falling into the tank.

In order for a thin stream to beautifully flow, drip or shoot up, decorative obstacles should be made of shells, stones, shards or other objects in its path. IN Ancient China and Japan, specially trained craftsmen built a channel for a stream so that it would babble beautifully. Tuners of the “music of water” created real masterpieces from ordinary pebbles, laying them so as to form cascades with depressions into which drops and streams fell, producing the noise characteristic of a stream or waterfall.

What to prepare for work?

To create a mini fountain, you need to choose a suitable pump. Its power depends on the height to which the liquid needs to be raised. This value is dictated by the dimensions of the structure and is determined individually. If you want to make a fountain with your own hands so that the stream of water shoots upward, it is better to buy a pump with more power and a regulator. To assemble a small tabletop cascade, an aquarium pump for filtering water is sufficient.

Before you make a fountain with your own hands, you need to prepare:

• a reservoir into which water will flow;
• silicone tubes;
• waterproof glue;
• materials for decorating the product.

The reservoir bowl should be spacious. In addition to its direct function - collecting liquid circulating in the system - it will also serve as the basis for a composition made of stone or other materials. Some of them can be placed directly in the container.

What to do if there is no pump?

A low-power pump that can raise water to a height of about 20 cm can be made independently. For this you need:

• a motor from a children's toy, camera or other, protected from water;
• batteries (phone or finger batteries);
• charging connector if using a mobile phone battery;
• LEDs - optional;
• switch of any type;
• electrical wires;
• plastic gear;
• a small round container (aerosol cap, plastic bottle);
• waterproof glue.

Make an impeller for supplying water from a gear from an unnecessary mechanism: adjust the wheel to the diameter of a round container, glue 4 pieces of plastic crosswise onto the shaft: fig. eleven). Drill a hole in the bottom of the container for the motor shaft, and in the side for water. Place the motor shaft inside the container, glue the motor housing to the bottom of the pump reservoir from the outside, and secure the impeller to the shaft inside (2). Cut a piece of plastic, make a small hole in it, and seal the open part of the pump body. Attach a tube to the hole in the side and seal the connection (3). Connect the wires to the motor and carefully insulate the connection, protecting it from water. Any sealant will do for this.

To connect the motor to the power source, use diagram (4). It is important to remember that batteries should not be exposed to moisture. You can attach them to outside pool, glue the switch here too.

You can include a resistor in the circuit to adjust the speed of rotation of the motor or LEDs for decorative lighting.

Assembly method

A homemade or purchased pump must be attached to the bottom of the tank (storage container). Its depth should be such that the pump is completely immersed in water. You can hide the pump in different ways: place a mesh cover on top of it, on which pebbles or shells will be placed to represent the bottom of a reservoir, or hide it inside a large decorative element. One of the design options - a dry fountain - provides for a completely hidden water surface in the storage tank. To do this, you need to lay a grate on top of it and secure the stones. The water will pass through the stones into the container without forming a visible pool. Rice. 2.

How to make a mini fountain in an apartment with your own hands from ceramic pots(Fig. 3), a short master class will tell you:

1. 1 Prepare 2 ceramic pots and 5 trays (2 large and 3 small). Cover them with waterproof varnish, drill a hole for the tube in the center of 1 larger and 1 smaller tray. Make cuts on the edges of the pallets to drain water.
2. 2 Install the pump at the bottom of the tank, following the diagram in the figure. Cover it with a large pot, and lead the tube through its drainage hole and drilled holes in the trays to the very top of the structure.
3. 3 Place a smaller pot next to it and secure the tray to it. The next tier consists of 2 small pallets (one is upside down and serves as a base for the bowl from the other). The pallets must be placed so that the holes cut into their sides allow water to flow from one to another, forming a cascade.
4. 4 Decorate a fountain, assembled with your own hands from the most simple materials, beautiful pebbles, plants and shells, figurines of aquatic animals or birds.

Such a miniature pond can be placed on the table or given a special corner among indoor plants. Iridescent water will not only enliven and decorate the composition, but will also slightly humidify the air.

Waterfalls in the room

A stylish and fashionable interior decoration is a vertical waterfall (Fig. 4). This variety indoor fountain It’s not much more difficult to make with your own hands than a mini tabletop fountain. The only difference is the pump power for such a large structure. When looking for a pump, you need to pay attention to the fact that the height of the water column is at least 1.8-2 m. This will make it possible to build a water wall or stream originating from the ceiling of the room.

Before making a home waterfall, you need to waterproof the floor in case the tank leaks. Polyethylene film can be used for this. It is advisable to cover with it a section of the floor 15-20 cm larger than the perimeter of the future structure.

For the panel on which water will flow, you will need:

• thick glass or mirror;
• 5x5 cm bars for support posts;
• base boards top cover;
• pipe plastic diameter 2 cm to distribute water over the glass;
• a block or thick board for the clamp step.

The structure of the fountain supply system is the same as discussed above.

On top of the fountain tray, you need to install and secure a board with a stop to fix the glass in a vertical position. Knock down the frame from the support bars and crossbars on top. The role of the crossbar can be played by the horizontal bar of the top cover.

A piece of plastic water pipe, the length of which is equal to the width glass panel, drill along one line along the axis. The holes should not be located too far from each other so as to avoid the impression of separate streams. Plug one end of the sprinkler tube and secure it to the top cover strip. Install backlighting if necessary.

Place the glass panel vertically, resting the lower edge against the step of the latch. Attach the side parts to the support bars using liquid nails. To prevent water from spreading beyond the panel, sides made of strips of glass, wood, and plastic must be glued to its edges.

Install the pump into the pan and run the water supply tube up to the open end of the distribution pipe. Connect and seal the connection. Hang the front part of the top cover. Decorate your home fountain with your own hands according to your own taste. Through many holes in the sprinkler pipe, streams of water will fall onto the glass and flow down it into the pan, creating the illusion of a falling stream.

Materials for decorative finishing indoor fountains, made with your own hands in tabletop or floor-standing options, can be found in pet stores (colored soil, castles, shells, ships in the aquarium department). Flower shops sell bamboo plant supports and beautiful containers. In the souvenir departments you can find artificial bonsai, figurines of birds and animals.

There is nothing more pleasant than to relax after working day under the quiet splash of water in a man-made stream. The decorative functions of the fountain are perfectly combined with its main purpose - to humidify the air in the room. You can add live indoor plants to the streams of flowing water.

Fountains are not only cool on a sunny day. This and positive energy, spreading throughout the house from the sounds of rushing water.

Many people want to surround themselves artificial reservoirs or at least small fountains to relax and unwind near them after work. You can do all this yourself: just learn how to make a homemade fountain with your own hands and build it, quite quickly and efficiently. And just such a fountain, created with your own hands, will become an exclusive decoration of your site and home!

Types of fountains

All fountains can be divided into fountains intended for indoors or outdoors. The first type includes indoor fountains. They are used rather for the purpose of decorating the interior of the house and can be different in shape and size, depending on the parameters of the room.

Outdoor fountains are designed to decorate a personal plot. They are placed on the site in front of the house or in the garden. They can be made of plastic, natural stone, marble, porcelain.

In addition, such a fountain can be equipped with lighting, and then you can admire it not only during the day, but also in the evening and at night. A festive atmosphere is guaranteed with such a fountain!

Country fountain

Many people ask themselves the question - how to make a fountain in the country? Before you start arranging this hydraulic structure, you need to decide on the desired model. His appearance directly depends on general style plot. So, if the dacha in rustic style A fountain in the shape of a mill is perfect, and for a site in a classic style it is better to build a fountain with a minimum of decor or in the form of a statue.

If your dacha resembles a picturesque corner of nature, you can make a small fountain, reminiscent of a geyser, gushing directly from under a stone. You can also place the fountain near an artificial pond surrounded by boulders.

Many lovers of country life are tormented by the question of how to make a simple fountain on their site. To do this, the fountain pool is buried in the ground, and a special recess is made at the base for all the equipment and the pump.

The main advantages of such a fountain are its sleek design, shallow depth and convenient built-in overflow-drain system. However, there are also disadvantages - high costs when installing the pool itself, cables and fittings. If you decide to make a fountain at home and settle on this particular type, arrange it so that each element pleases the eye and creates a feeling of harmony and peace.

Tools and materials for arranging a fountain

Before you begin installing the fountain, you need to acquire materials: a beautiful fountain is unlikely to come out of nothing. The choice of materials for the fountain depends on the place from which its arrangement begins. It is better to use a small pond to build a fountain. summer cottage, and then before doing home fountain, you won’t have to think about water drainage. If you already have a reservoir, then for work you will need:

• storage tank;
• set of nozzles;
• the fountain itself;
• pump.

The most crucial moment is the choice of pump. The modern market offers electromagnetic, centrifugal and vortex pumps. For country fountains it is recommended to use centrifugal pumps, since they are more powerful, but at the same time quite economical. If there is no reservoir on the site, you need to dig a pit and equip it with artificial pond, equipping it with a special film and concrete block on which the pump will be placed.

Stages of fountain construction

The organization of a country fountain requires careful planning. In order to understand how to make a fountain with your own hands, you need to correctly calculate the location of the future structure, its proximity to power sources and water supply.

Water from the fountain can be drained down the drain into the sewer, or it can be recycled - reused, which significantly saves the process. When preparing sewer channels for draining water from the fountain, a rainwater inlet may be used.

If there is a ready-made bowl for the fountain, a pit is dug for it. Otherwise, they also dig recesses and equip it like a small pool: drainage in the form of sand, strengthening the walls, waterproofing layer, sewer connection.

The construction of the fountain itself begins with the installation of a pump. It is important to remember that there is an underwater and above-water position for fountain pumps, with the above-water pump being more often used for larger fountains as it produces a higher, stronger jet. It is also necessary to ensure that the electrical wiring is well insulated. The fountain itself is usually installed in the center of the pond so that water does not spill beyond its boundaries.

Fountain decoration

Uniqueness homemade fountain You can emphasize it by decorating it. How to make a fountain at home so that it becomes a decoration of the yard both day and night? This is possible thanks to the effect of artificial illumination of the fountain using special lighting equipment. Lamps that illuminate the fountain around the perimeter and even in the water will help create a fabulous harmony of water and light.

You can also plant bushes or flowers around the fountain, and the bottom of the reservoir itself can be landscaped using various aquatic plants. The fountain can be decorated with wood, stone or statues.

When equipping a fountain, you can use ready-made statues and figures. But it depends on you how much a standard fountain will become exclusive.

Indoor fountain

Any apartment interior can be enlivened with the help of a small fountain. Before starting work, it is better to figure out how to make an indoor fountain with your own hands and think through all the nuances. To implement this idea you will need the following materials:

• container on which the fountain will be located;
• aquarium pump;
• a small piece of hose for cleaning the aquarium;
• glue;
• large sink;
• colored decorative soil, shells and expanded clay.

First you need to find a container in which the fountain will be located. For this purpose, you can use any vessel you like, for example, a flower pot. You can also choose a beautiful one flower pot or a basin for a fountain, the main thing is that the water does not leak out.

In addition, you need a pump with a sprinkler and without a tip, since the container for the fountain will be small. the main task The purpose of the pump is to raise the stream of water.

Stages of construction of a decorative fountain:

1. Cut a small piece of about ten centimeters from the aquarium hose. You need to immediately put it on the pump tip and make sure that all the holes in it are open at full strength, since the power of the jet depends on this. Then you should strengthen the pump at the bottom of the selected container.
2. We fill the pump with expanded clay and level its surface.
3. Close up the expanded clay plastic film with hole for hose.
4. Sprinkle decorative primer onto the surface of the film.
5. If you need a stand for a sink made of stones, then it should be glued with epoxy waterproof glue to the sink.
6. Install the stand by first inserting the hose into it.
7. Through drilled hole We put a sink on the end of the hose and stretch the hose into it one centimeter.
8. Decorate the surface of the fountain with beautiful shells or stones. And the sink from which water flows can be replaced with something else, as long as there is a hole for the hose. The design and style of an indoor fountain depends entirely on the imagination of the craftsman who makes it.

Decorative mini fountain

A cool fountain on a hot summer day improves your mood and invigorates. In such a situation, even a small fountain will be a lifesaver for you. How to make a mini fountain? This is quite easy, you just need to stock up on the following materials:

• flower pot with tray;
• small water pump;
• paints for ceramics and glass;
• contours;
• decorative plants for the aquarium;
• artificial translucent balls or stones.

Stages of work:

1. The flower pot will serve as the basis for the fountain. If desired, you can decorate it with unusual painting. To do this, use special paints for ceramics and glass.
2. Then install the pump under the pan to circulate water, you need to do it in the bottom small hole for drain.
3. Pass the pump tube through the hole and fill the bottom with decorative stones.
4. Assemble the entire structure and fill it with water. Decorative aquarium plants will help revive the landscape.

Thanks to this scheme, anyone can make a mini fountain with their own hands, using their fantasy and imagination.

Fountain lighting

One way to make even an ordinary fountain magical is to use lighting. It could be:

• surface lighting in the form of lanterns along the perimeter of the fountain;
• underwater lighting using waterproof lamps;
• floating backlight on built-in autonomous batteries.

With underwater lighting, the effect of water glow is created; if the lighting is rotating, then the whole process turns into a water-light extravaganza. A rotation mechanism is used for this.

An important stage of lighting equipment is laying the wiring in a water-repellent busbar. For safety, it is equipped with an automatic breaker (in case of current leakage). To comply with safety precautions, when installing fountain lighting, lamps with a voltage of 12 Volts are used. These are primarily halogen lamps, and lamps based on fiber optics and LEDs. Connect the lamps to the network or transformer.

If you want to illuminate the water surface, place the lamps around the perimeter above the water. If you want to emphasize some element of the composition, use a directional beam of light, if the entire composition is a spotlight. Using Spotlights, you will be able to focus attention on one detail, for example, a group of plants in a pond.

Fountains have always decorated any interior. Today they are widely used for the purpose of decorating premises and ennobling personal plots. Therefore they are widely used in landscape design. A fountain on the lawn, near a gazebo, near an artificial reservoir surrounded by rock gardens - there are many options for the location of fountains. They can occupy any free space or become a central place in the design. garden plot. By giving free rein to your creativity, you can figure out how to make the fountain not only beautiful, but also unusual.

There is hardly a person who would not like to have their own small pond on the site near their house to make it special.

And if you create such a reservoir yourself, it will truly become a unique and favorite vacation spot, from which you will receive a lot of positive emotions and words of delight from all your acquaintances and friends. All the splendor of the fountain at the dacha is presented in the photo.

However, not everyone decides to build a pond on their own. Probably, many are afraid of the unknown process of constructing hydraulics, believing that it is difficult and expensive, and only specialists can understand such a design. But that's not true.

If desired, anyone can afford to build a fountain in the yard near their house, the main thing is to know some details of the technology for creating a fountain.

Determining the type of fountain

There are two types of fountains depending on their design:

When water enters the nozzle, the so-called open view. A stream of water in this case appears due to level differences in the water. But because of this, the water pressure is weak and constant monitoring of the water level is necessary. As a result, the water quickly becomes cloudy.

When creating such a fountain, it is worth taking care of a medium-sized tank installed above the nozzle 1 m upward.

When pump assembly is required. This option is more suitable and effective to use.

The pump located at the bottom ensures constant circulation of water. As a result, the water pressure is higher and the fountain spray is more spectacular.

Pumps are also divided into two types according to the type of device:

• Submersible. The pump is located at the bottom of the reservoir. The structure includes: a pipeline, a pump and a nozzle, on which the shape of the outlet stream depends. This fountain looks like a spring flowing strongly from underground.
• Superficial or stationary. Basically, such a fountain is made from artificial stone in the form of various figures: a girl, an animal, a vase, a flower, etc. As a result, it looks like a sculptural masterpiece. Such facilities are available in city parks of culture and recreation.

Placements

When determining a suitable location for the organization garden fountain, do not lose sight of the slope of the earth's surface.

On a hilly piece of land, it is better to install a picturesque decorative part in the lowland. This way you will adjust the quantity groundwater and ensure a more complete saturation of the air with oxygen molecules.

You should not build fountains:

• almost next to the house, so as not to oversaturate the walls with moisture.
• in the open sun, otherwise the water will quickly bloom due to direct rays of the sun.
• near massive vegetation and trees, since roots can disrupt the waterproofing, and falling leaves, fluff, etc., will clog the water.

The fountain should not block access to various places of use and should be visible from all angles. Place it near your resting place.

There should be at least 50 cm from the fountain to the area of ​​vegetation, houses or furniture, so that the plants do not die from waterlogging, and the furniture does not fail for the same reason.

Most advantageous location The placement of the fountain will be in a slightly shaded place, hidden from the wind, next to sources of water and electricity, in order to reduce the consumption of wires and the time for their insulation.

Once a suitable location has been chosen, you can move on to the next step: choosing the shape and depth.

Note!

Necessary materials

In order to save money, time and own strength, to build your own fountain, it is better to use the technology of constructing a reservoir with a pump device.

For this you will need following materials: container, pumping system, polyethylene, bayonet-shovel, artificial or natural stones, sand and gravel soil, decorative elements.

Selection of container and its installation

To build a compact mini fountain with your own hands, it is better to use an ordinary plastic basin or a similar container.

For large structures, used bathtubs are often used or a pit is dug the right size on your own.

They also dig a hole of a certain size under the bathtub so that its edges do not rise above ground level.

Note!

Check in advance to see if any cracks or holes in the bathtub need to be sealed. If not, feel free to lower it into the prepared pit and secure it with stones, sand and earth.

If you do not have the necessary container, you can dig a pit yourself, taking into account the selected dimensions. Then they are covered with durable polyethylene and reinforced with stones along the edges. The bottom is completely and evenly covered with various smooth stones.

Selecting the required pump

It is not at all necessary to purchase expensive materials to build a fountain with your own hands; you can safely use used ones. But it’s still better to shell out money for a pump and buy a good one.

Submersible pump is the most suitable option. It acts like a centrifuge. The surface type of pump is more often used for large fountains and reservoir cascades, and when installing it in a summer cottage, installation is carried out at the edge of the reservoir.

To choose the right pump, it is necessary to take into account the constant water pressure in the pipe and its differences. Otherwise, a higher-power pump will not be able to work at full capacity and will have to be replaced with a less powerful one.

Note!

The diameter of the pipe is also important when determining the power, because the stream should flow powerfully from the fountain, and not ooze, depicting some kind of fading spring.

Step-by-step construction of a home fountain

The construction of the fountain consists of the following stages:

• digging a pit;
• strengthening the trench ditch;
• immersing the tank or covering it with polyethylene;
• pump installation;
• decorative arrangement.

Fountain using polyethylene film

For this you need the following materials: durable polyethylene, shovel, sandy soil, pumping system, stones.

Execution steps:

• We prepare the hole, remove the stones and compact the base;
• The bottom is completely covered with sand, pre-sifted;
• We cover the entire pit with plastic film, covering the edges around it;
• The foundation pit, covered with film, is securely fixed around the entire perimeter with stones;
• We install the pump;
• We decorate the fountain with decor;
• Fill with water.

Fountain from an old bathtub

For this you will need: a shovel, small stones, pump, used bathtub, insulation tape, metal cutting shears, non-ferrous metal sheet and drill.

Procedure for constructing a fountain:

• Digging a pit a little more sizes baths;
• We lower the bathtub into it and seal the holes and cracks;
• We line the sides inside the bathtub with strips of non-ferrous metal, covering them with stones;
• We place small multi-colored stones at the bottom;
• We place a pump in the center of the structure;
• To make the fountain brighter, you can add lighting to the structure and tint the water blue.

Fountain from a plastic bottle

You will need: plastic bottle, rigid wire or nail, tape insulation and watering hose.

The design of such a fountain is very simple:

• Take an empty bottle, previously cleaned of excess parts;
• Use a nail or wire to make holes;
• Place the bottle on the watering hose and secure it securely with electrical tape;
• Place in the garden and run water.

Home fountain without pump

To build it, prepare: a large flower pot, a tray, paints, a water pump, outlines, and decor.

• Paint the pot with paints;
• Make a hole in the bottom of the pot;
• Place the pump under the tray;
• We pass the pump tube through the pot hole;
• Cover the bottom with pebbles;
• We decorate different things and vegetation;
• Fill with water.

Decor

Various decorative things will help to make the fountain beautiful: multi-colored stones, potted plants, figurines, ceramic products etc.

For dark times of the day, provide multi-colored lighting and lamps around the fountain.

Fountain care

To ensure the cleanliness of the area and the reservoir (fountain), constant care is required in the form of cleaning. Regularly clean the surface of the water from accumulated debris using special equipment.

At the end of the season, the water must be drained, the removable devices must be stored in the pantry, and the rest must be covered with film for wintering.

DIY fountain photo

Even the smallest fountain can transform the landscape of a dacha or private home beyond recognition. This decorative structure will definitely become a favorite relaxation spot on your site, because it will give you the opportunity to unite with nature at any moment. Do you want this to become a reality faster? There is nothing super complicated here - anyone can make a fountain with their own hands. Don't believe me? Then here are step-by-step instructions with photos, following which you can quickly and without the involvement of professionals get an effective and functional fountain.

First of all, you need to choose the appropriate fountain option for your site. It's about about its dimensions, shape and materials. When deciding this issue, focus on the area and style of the yard of your dacha or private house.

So, for a large area it is better to choose a classic sculptural model that will become the center landscape composition. And for a modest courtyard, fountains in the form of small architectural forms are suitable: sea shells, fairy-tale characters, houses, pots and other similar figures.

An original fountain made from scrap materials

But you don’t have to buy a ready-made sculpture, because you can also build a fountain with your own hands. The simplest option is a structure made of stones. To make it, place large flat stones on top of each other, use an electric drill to make holes in each of them and string all the resulting products onto copper pipe- it is through it that water will flow to the top of the structure. Then close the gaps with small stones and treat the cracks silicone sealant.

Choosing a location

The next step is to decide where exactly on the site the fountain will be located. In order for a structure to fully fulfill its aesthetic function, it cannot be installed “anywhere” - it is important to choose the best location. And for this you need to take into account several nuances.

1. Firstly, there is no place for a fountain to be too open area, since under the influence of active sunlight the water may begin to “bloom”.
2. Secondly, the fountain cannot be placed among powerful trees - their roots can cause deformation of the tank and waterproofing. In addition, leaves, fluff, fruits and tree seeds will constantly pollute the fountain.
3. Thirdly, the structure should not be too close to the house, otherwise moisture will fall on its walls with the wind.
4. Fourthly, it is undesirable to place the fountain in the open wind so that its gusts do not “disrupt” the jets.

Position the fountain so that it can be seen from different parts of the site

Thus, the ideal location for a decorative fountain is light partial shade surrounded by flowers and low bushes.

When you choose a place, proceed directly to arranging the fountain. It assumes phased implementation three main groups of work:

• tank preparation;
• pump installation;
• installation and decoration of the fountain.

Preparing the tank

In order for the fountain to be durable and solid, it is necessary to equip a special reservoir for hydraulic equipment and water. This is done as follows:

• Dig a pit of pre-calculated depth and the diameter you need.

Important! The depth of the reservoir should be below ground level so that the soil around the fountain bowl is not washed away and the base is not deformed.

• Pour a thin layer of sand onto the bottom of the resulting hole and carefully reinforce its side walls with bricks.
• Cover inner surface pit with a thick plastic film - it will prevent the passage of water.
• Fix the film along the upper edge of the tank and treat the seams with frost-resistant silicone sealant. Place stones at the bottom of the pit, distributing them over the surface of the film. The stones should not be sharp so as not to deform the film.
• Install a small emergency drain near the pit to prevent the water level in the tank from rising.

Construction of the fountain

Installing the pump

The fountain will not be able to work without the most important mechanism - the pump. It is he who is responsible for the continuous movement of water flow. General principle The operation of the pump is simple: water is discharged through a nozzle into the reservoir, then enters the pipeline, where it undergoes coarse and fine cleaning, and then the already purified water is sent back to the nozzle.

The quality of the fountain’s functioning directly depends on the type of pump:

• Submersible - works on the principle of a centrifuge and is located in the center of the fountain tank under water. This is a cheap but reliable device, the installation of which does not require any fasteners - the submersible pump is quite heavy, so it does not budge on its own. It is suitable for small weak fountains.

Diagram: fountain pump operation

• Surface is a more serious type of pump, which is installed not inside the tank, but on its edge on the surface of the earth. This device is designed for large fountains with complex designs.

The piping for the pumping system can be constructed from plastic pipes. Their optimal diameter is 16 mm.

Advice. In order to enhance the operation of the pump, additionally install a pressure tank - it will guarantee a constant pressure of the water flow.

Fountain decoration

After the main functional elements are installed, you need to take care of installing the fountain itself, or rather its upper part. If you are using ready-made sculptures, they should have special fastenings for installation. But a homemade stone fountain is best installed on metal slats previously laid on top of the tank.

Then start decorating the structure. The fountain can be decorated with plants, different-sized stones, clay figurines, microsculptures and any other details that seem appropriate to you on your site.

You can decorate the fountain with stones, sculptures and plants

Don’t forget about such an effective decorative tool as lighting. These can be underwater lights, light strips, floating lanterns, land lamps - here you are also unlimited. But remember that lighting structures must be completely sealed, and all their contacts must be protected from water as reliably as possible, otherwise it will be unsafe to use them.

When all work is completed, fill the tank with water and start the fountain.

As you can see, to make a beautiful fountain with your own hands, you don’t need to work hard or spend a lot of money. Do not deviate from the instructions, use quality materials and don’t be afraid to experiment with decor – by following these three simple rules, you will definitely get a functional fountain that will delight your eyes and set you in a positive mood for many years.

Which fountain to choose for your dacha: video