Wall-mounted gas boiler Electrolux GCB 24 Basic X Fi manufactured with two circuits combined in a bithermic heat exchanger: for supply hot water and for the heating system. This boiler model is designed for heating small rooms, the heating system of which is 60 sq. m. - 220 sq.m., and the need for hot water supply is up to 11.3 l/min.

Included gas boiler bithermic heat exchanger and closed combustion chamber. To create maximum comfort, the boiler has been technically improved and equipped with new modern features ensuring safety in operation.

The Electrolux boiler of this model has built-in safety devices: minimum pressure sensor, differential pressure gauge, gas valve, auto-restart function, ionization control for the presence of flame. The equipment has a number of distinctive features that make it stand out among the model line heating equipment. The boiler is equipped with the "ETC - External Temperature Control" system - a weather-dependent control system that, regardless of any changes in weather conditions, is capable of ensuring a constant temperature in the house.

Thanks to the "Water Recall" function - the function of accelerated production of hot water, instantaneous supply of hot water is ensured. No less important function Maintaining a constant temperature of hot water is ensured by the presence of the "Comfort" function.

The "Programm Easy" system - programming of operation, makes it possible to set the operating mode of the gas boiler for a week and every 30 minutes. This programming of operation allows you to significantly save gas, since at a certain time the boiler will operate at minimum power, only maintaining the set temperature.

For the wall-mounted gas boiler Electrolux GCB 24 Basic X Fi, it is possible to control it, as well as program its operation from a distance using the connected “Fly-by-wire” system - remote control remote control.

In addition, the gas boiler has protection against overheating, power outages, and exposure to low temperatures. So, if the temperature drops significantly, below 5 degrees, the “No-freez” system - an anti-freeze system - is automatically turned on in the heating circuit.

Thanks to high operational characteristics, such as heating temperature regulation 40°C - 85°C, hot water temperature regulation 35°C - 60°C, minimum ignition pressure requirement - 2.5 bar, etc., the wall-mounted gas boiler Electrolux GCB 24 Basic X Fi is great solution for organizing heating and hot water in your home, especially since one of the most important advantages of this boiler is the ability to use antifreeze and other non-freezing liquids in the heating system where this heating boiler is installed. To transfer to liquefied gas you need to purchase a set of nozzles (12 pcs.).

Attention! To organize smoke removal, a coaxial chimney is required, which is purchased separately.

Options for organizing smoke removal:

1. Horizontal coaxial chimney
2. Separate smoke removal system
3. Vertical coaxial chimney

Today's review will be devoted to gas boilers of the Swedish company Electrolux Basic series. This line of heating equipment includes five boiler models, only one of which (GCB 24 Basic X i) has an open or atmospheric combustion chamber.

Let's consider all the pros and cons of Basic series boilers from the consumer's point of view, since many technical characteristics mean little to a non-professional.

All boilers in this series are wall-mounted. The models have exactly the same parameters: dimensions (height x width x depth) – 725x403x325 mm, weight – 34 kg. Therefore, they can be installed almost anywhere.

Considering that the weight and dimensions of a double-circuit boiler are not much different from a conventional gas water heater, it is attached to the wall either with anchors or thick screws. You can do this work yourself.

Connecting communications

The Basic wall-mounted boiler is an energy-dependent boiler, therefore it must be supplied with a “Euro” socket for power supply.

Any device of the Basic series can operate either from natural gas, and from liquefied fuel.

Important! Work on connecting a gas boiler to a gas pipeline should only be performed by a specialist from the appropriate service!!!

In addition, any gas boiler needs removal of combustion products and an influx of fresh air to maintain the combustion process. As mentioned at the very beginning, practically all the models described have a combustion chamber closed type. This means that the Electrolux wall-mounted boiler must be connected to coaxial chimney. For private homes this is a big plus, since it will not take air from the room.

For a city apartment, where it is not possible to “cut through” the wall to output the “coaxial”, the GCB 24 Basic X i boiler is suitable, since it has an open combustion chamber.

Choosing the right boiler

All double-circuit Electrolux Basic colas, regardless of the model, are designed for heating relatively small areas. You can even find out the power of a boiler by its name. For example, the designation GCB 24 Basic Xi ​​Fi indicates that the wall-mounted boiler is capable of delivering maximum thermal power 24 kW.

It is clear that there is no point in buying a device “for growth” and paying extra money. How to choose the best option?

You need to focus on the fact that to heat 10 m2 of area, 1 kW of device power is sufficient. But this is an approximate calculation for ceilings of normal height, and does not take into account the characteristics of the building. What to consider?

Firstly, what material is the house built from? It is always colder in concrete buildings than in brick or timber (log) buildings. Plus, you need to take into account the location of the house or apartment in it. If the building is “covered” from the winds by other buildings and plantings, and the apartment is not corner, then this ratio is suitable. And if the apartment is always cool, then the power needs to be increased.

Secondly, how is the home insulated? What is the average temperature there?

Thirdly, the dual-circuit Electrolux should not be allowed to always operate at its limit.

As an example, consider a 24 kW Electrolux boiler. It will be able to efficiently heat up to 200 m2 of area, provided that the building is insulated. If the house is cold, then it is “enough” (approximately) only for 140 - 160 m2.

DHW

Any Basic wall-mounted boiler is double-circuit. This means that it not only heats the premises, but also provides hot water For economic needs. Productivity – from 10.3 to 13.6 l/min (depending on the specific model). Temperature control is possible within the range from 35 to 60 0 C. summer period The Electrolux boiler can be used as a regular gas water heater.

Gas and electricity consumption

The efficiency of all is high and approximately the same. It lies within 90 – 92%. The consumption figures for blue fuel are as follows: from 0.98 to 2.0 m 3 /hour for natural gas and 0.24 to 0.71 m 3 /hour for liquefied gas. Of course, consumption greatly depends on the selected operating mode.

Electricity consumption is 120 – 125 W, which is comparable to the consumption of a conventional incandescent lamp.

Features of Electrolux Basic boilers

One of the main features of gas double-circuit boilers in the Basic line is the ability to control them remotely using a small remote control. Therefore, there is no need to use the control panel located on the device body.

The Electrolux boiler is also equipped with a self-diagnosis system, which displays all test results on the LCD display. Using the error symbols, you can identify malfunctions and fix many of them yourself.

If you connect an “outdoor” temperature sensor, its regulation will occur automatically, depending on the weather.

Another feature of Swedish boilers is the ability to program operation for up to 7 days at intervals of half an hour. This allows you to significantly save on gas and electricity consumption, especially if there is no one in the house during the day.

In cases where the burner flame goes out, the set temperature of the coolant is exceeded (overheating), problems with smoke removal, or the pressure in the heating or gas supply system drops to critical, the boiler automation will block the gas supply and turn it off.

Depending on the model, the cost of the boiler will vary from 22,970 to 33,450 rubles.

1. The Basic boiler is the best option for use in city apartments or private residential buildings area up to 200 – 240 m2. Can be installed in administrative, utility, production or warehouse premises.
2. All wall-mounted boilers Electrolux of this series is double-circuit, so it not only heats your home, but also ensures that the need for hot water is met.
3. For a city apartment, it is better to purchase a GCB 24 Basic X Fi boiler with an open combustion chamber.

• The Electrolux double-circuit boiler is a complex device. Such devices are literally “stuffed” with electronics, the normal operation of which requires a stable voltage. Therefore, when buying a boiler, it is advisable to immediately purchase a voltage stabilizer for it.
• Before purchasing, you must check the diameters of all pipes for connection to heating systems. You may have to immediately purchase adapters.
• Such complex devices are always given a guarantee, that is, during this period, opening the boiler is, in theory, prohibited. However, he needs maintenance like before the start heating season, and after its completion - this required condition trouble-free operation. When buying a boiler, you need to find out who provides maintenance (and, if necessary, repairs) during the warranty period? What powers and capabilities does this organization have? Where is she located and how can I contact her? If the Seller does not have answers to these questions, then it is better to look for a store where they can give you a clear answer.

By installing an Electrolux Basic gas boiler in your home or apartment, you have at your disposal modern climate control equipment capable of solving two problems - heating living quarters and providing hot water preparation. This model range is distinguished by the presence of advanced electronics that ensure the maintenance of a comfortable temperature in independent mode. In this review dedicated to boilers Electrolux Basic, we'll consider:

• distinctive features model range;
• management features;
• internal structure of boilers;
• equipment characteristics.

At the end you will find reviews about Electrolux Basic gas boilers.

Features of Electrolux gas boilers

Gas boilers Electrolux Basic are wall-mounted boilers designed for use in private homes and apartments. The lineup includes two models:

• gas boiler "Electrolux Basic X I" - with an open combustion chamber;
• gas boiler "Electrolux Basic S FI" – with closed camera combustion.

Gas double-circuit boilers Electrolux Basic will provide your home not only with heat, but also with hot water.

Both models built according to a double-circuit scheme, allowing for space heating and hot water preparation. For this purpose, their design includes bithermic heat exchangers. This equipment can be used in apartments with individual heating and in private homes. The heated area varies from 40 to 220 square meters. m.

Home distinctive feature gas double-circuit boilers "Electrolux Basic" is the presence of advanced control systems. To begin with, we should highlight the presence of a weather-compensating automation system. She provides automatic maintenance optimal temperature indoor air, focusing on the weather “outside”. For this purpose, the boilers are equipped with appropriate temperature sensors.

Weather-compensated automation ensures the efficiency of the heating system. It independently adjusts operating modes depending on outside temperature, allowing you to save on gas consumption. Users also get rid of the need to touch the settings once again, trying to choose the optimal heating mode - all these worries are taken care of by smart and almost never mistaken automation.

It is also necessary to note the presence of an advanced wireless remote control system. It allows you to control heating modes from anywhere in the apartment/house and set the work schedule for the week in advance. This functionality will be useful for those who live in their home infrequently, appearing there only from time to time, for example, only on weekends. The flexibility of the remote control system allows you to set the work schedule with an accuracy of one hour.

What else is different about Electrolux Basic double-circuit gas boilers?

Using Electrolux gas boilers you can create a system heated floors.

• The presence of an intelligent self-diagnosis system - the boilers themselves will tell you about their breakdowns;
• Availability of adaptation to Russian operating conditions - boilers operate quietly when the supply voltage is reduced to 187 V and the gas pressure is reduced to 3 mbar;
• High level of safety - for this purpose, the boilers are equipped with various protective systems. They monitor the presence of a flame, the temperature of the coolant, the normal operation of the hood and the condition of electronic components;
• Ability to work with warm floors– for this there is the “Affect Floor” mode;
• Easy to control - the manufacturer has done everything possible to not complicate the system.

Thanks to these features, consumers have at their disposal excellent climatic equipment, providing space heating and hot water preparation.

It is also impossible not to note the very decent, albeit strict design cases - laconic features go well with a large backlit LCD display and convenient systems management.

Specifications

Electrolux Basic S FI is perfect for heating houses up to 160 sq.m.

The official website of the manufacturer will help you study Electrolux Basic gas boilers, but you can get acquainted with the most basic technical characteristics using our review. To begin with, we will look at the Electrolux Basic S FI model - this is a double-circuit boiler with a closed combustion chamber and a power of 18.4 kW. The heated area varies from 40 to 160 square meters. m, and the productivity of the hot water supply circuit is up to 10 l/min.

Maximum temperature The coolant in the heating circuit is +90 degrees; at higher values, protection is triggered. The coolant temperature for powering “warm floors” varies from +35 to +60 degrees. The efficiency of this model is 92%. The minimum power is 4.7 kW. Boiler dimensions – 725x403x325 mm, weight – 34 kg.

The Electrolux Basic X I double-circuit gas boiler is equipped with a bithermic heat exchanger and an open combustion chamber (the so-called atmospheric burner). The minimum power of the model is 5.4 kW, the maximum is 23.7 kW. The heated area varies from 50 to 220 square meters. m, the productivity of the DHW circuit is 13.6 l/min. The maximum coolant temperature is +90 degrees, the nominal temperature is from +40 to +85, in the “warm floors” mode – from +35 to +60 degrees. Efficiency indicator – 90.1%. Weight and dimensions are the same as the model described above.

Thus, the presented boilers from the Electrolux Basic model range differ in the performance of the hot water circuit, power, efficiency and combustion chamber design.

Gas boilers are controlled using an on-board button panel equipped with a backlit liquid crystal display, or using connected room thermostats. Connection of wireless control modules is also supported. If you need instructions for these boilers, check out the manufacturer's official website.

Reviews of gas boilers "Electrolux Basic"

The promised reviews of gas boilers from the Electrolux Basic model range will tell you everything that experienced consumers say about this equipment. There are both positive and negative ratings.

Alina 29 years

The Electrolux Basic boiler was installed in a house we bought in the Moscow region. I've seen and read before

Electrolux GCB 24 Basic Xi

Technical characteristics of Wall-mounted gas boiler Electrolux GCB 24 Basic X i:

Model description

GCB 24 Basic Xi ​​is a double-circuit wall-mounted gas boiler with an open combustion chamber from Electrolux (Sweden). Designed for small heating and hot water supply systems. Equipped with a bithermic heat exchanger that combines two circuits - heating and hot water supply and an open combustion chamber with natural system smoke removal. The wireless remote control system allows you to control the operation of the boiler from a distance, and using the programming system you can set the boiler operating mode for every hour during the week. The built-in weather-dependent control system maintains the room temperature at a given level, regardless of external climate changes. Adaptation system for small heating systems with electronic modulation allows maintaining comfortable temperature even in small rooms, therefore, boilers are recommended for apartment heating.

Distinctive features:

Capable of providing up to 24 kW heating power and up to 13.5 l/min. hot water at ΔT 25°C.
Automatic electronic ignition and reliable ionization flame control.
Ready for Russian operating conditions. Stable operation at low inlet pressure of natural gas up to 3 mbar and a decrease in supply voltage to 187 V.
Intelligent system self-diagnosis with visual display of fault codes.
Possibility of connecting a room thermostat or a wireless remote control system (Fly-by-wire).
The security system automatically turns off the gas supply when: the flame goes out, the boiler overheats, there is insufficient safe work coolant pressure or hot water flow through the heat exchanger, failure of combustion products removal, electronics malfunction.
Additional operating mode - “warm floor” (Affect Flour)

Characteristics
Model GCB 24 Basic X i
Maximum power, kW 23.7
Minimum power, kW 5.4
Nominal efficiency, % 90.1
Heating temperature regulation, °C 40-85 °C (35-60 in “Affect floor” mode)
Maximum pressure in the heating system, bar 3
Maximum coolant temperature, °C 90
Heated area, sq.m. 50-220
DHW capacity at ∆25°C, l/min 13.6
Min/max pressure in DHW system, bar 0.3/6
Regulation DHW temperature, °С 35-60 (42°С in “Comfort” mode)
Dimensions H/W/D, mm 725/403/325
Boiler weight, kg 34