Do you want to create a romantic atmosphere? Or cozy and warm? Or maybe fun and festive? This floor lamp will definitely help you.
Its advantages:
- Soft light that does not hurt the eyes.
- Low power consumption.
- You can turn the lamp on and off, control color and brightness from the remote control.
- Modern style, which will fit anywhere.
- In addition to control and brightness, there is a smooth color changing mode and a dynamic switching mode, fast and slow.

In general, not a lamp, but a find!
The heart of the lamp is a Chinese garland with a controller and remote control remote control. Plus the power supply that comes with the kit.
Quite inexpensive, bought it here -

If you have big problems If you're on a budget, you can take a simple white LED strip and power it from a power supply.

Other materials:
The rest of the materials that I used to make the lamp are not in short supply and are available at any hardware store.
1. Wooden corners 4 pieces - anyone who has trimmed with clapboard will understand what we are talking about, if not, ask the seller.
2. Wood slats 4 pieces – there shouldn’t be any questions here.
3. Two types of fabric: 1) transparent with a pattern, for effect. The type of organza that curtains are made from. 2) Denser, for dispersion, fabric such as chintz. I’ll admit right away – I’m a complete zero in fabrics and sewing. I just went to sewing store and chose what I wanted to look like... I don’t remember exactly what it’s called.
Of course, you can limit yourself to one dense one, but I just decided to stand out.
4. Plastic corners 3 pieces - any construction material.
5. Small nails.

Making a lamp

We collect all the materials and move on. I ordered an LED strip from China and while it was on its way, I started making the frame of the lamp and cutting fabrics around the frame.

The first thing you need to do is decide on the size. I took it to a height of one and a half meters. Taking this into account, I saw off 4 wooden corners. The main load-bearing parts of the lamp are ready.

Now we decide on the width - I took 30 cm. We begin to nail together with small nails. We do everything carefully so that nothing cracks. If it suddenly cracks, take PVA glue and glue it together.

One side is ready. We stuff corners onto it, sawn to the width minus the thickness of the sides.

Everything needs to be done proportionally. Everything must be pre-marked with a simple pencil. Don't forget about the legs of the lamp.
We assemble the frame - everything is ready. The biggest job is done. This is what ended up happening.

Now take the LED strip and glue it to the corners.

The height of the lamp is 1.5 meters. I took the tape 3 meters, that is, it goes along one corner and diagonally in another. If you want more brightness, take enough tape to cover all 4 corners.
LED strip adheres very well to wood.

Now we alternately wrap it in layers of fabric. First one, then the second. For fixation we use furniture stapler. We cut off all protruding parts. All this is done very simply and quickly.

Next we take plastic corners. Choose the color you like - there is a wide choice now. I thought a dark corner would harmonize well with the white color of the lamp and took it.

We cut the corners and glue the top and bottom first. Then we cut the corner lengthwise and glue the sides with strips.

Great idea: make a floor lamp for your living room with your own hands. After all, his modern design The brass look looks like you spent a fortune on it, but in reality, creating such a floor lamp will fit within your budget.

DIY floor lamp

Any interior designer will recommend using several light sources in the room, from wall sconces and to floor lamps and lamps, (also) to illuminate certain areas of the room, as well as reflecting your range of moods. However, in order to realize all these ideas, it will be necessary sufficient quantity financial costs for purchasing these creative illuminators in the store. So you can make your own stylish floor lamp, but several times cheaper than their counterparts in expensive stores, which will worthy decoration country house or country house.

How to make a floor lamp - master class

Start the day with a trip to the hardware store, and you can end it on a well-lit couch with a good book.

Tools and materials:

• Lumber
• Hacksaw
• Wood glue
• Fasteners
• Drill
• Bit
• 30 mm diameter wooden beam 140 cm long
• 20mm diameter copper tube 1m long
• Clean cloth
• Protractor
• Permanent marker
• Universal glue
• 20mm diameter copper elbow
• Lamp complete with socket, electrical cord(3 m) with plug
• Pliers
• Screwdriver
• Openwork plastic trash bin
• Utility knife
• Copper-look spray paint
• LED light bulbs

Floor lamp base

Figure 1 Figure 2 Figure 3

1. Cut 2 planks, one approximately 30 - 35 cm long from a 5 cm thick and 20 cm wide board and the second 30 cm long from a 2.5 cm thick and 15 cm wide board. you can use wooden blocks other sizes, a little smaller or a little larger, but make sure the base is heavy enough to keep the tall lamp from tipping over.
2. Apply wood glue to the bottom of the smaller piece and then align it so it is centered along the short side of the bottom block as shown in Photo 2. Press together and secure with clamps until the glue is completely dry.
3. Measure 5 cm from the edge and drill a vertical hole with a diameter of 3 cm in the base using a bat of the appropriate size. Since the base is quite thick, you will have to drill in several stages, periodically removing wooden parts from the hole with a chisel. Drill a through hole in this way, and then sand all the edges of the base and set it aside.

Frame for floor lamp

We chose a wooden stand that's almost five feet long to allow light to fall onto the sofa from above, but you can choose a taller wooden stand if you want a taller floor lamp.

1. Wipe the copper pipe with 70% alcohol to remove labels, stickers, and remaining preservative before proceeding.
2. In this design, copper pipe passes through the tongue at an angle so that the lamp is positioned on top of any seat. To make this task easier, you need to drill a hole in the wooden stand using a 2 cm bit. Measure 30 cm from the top end of the post, and drill a hole at a 60 degree angle (use a protractor for greater accuracy). To make drilling more convenient, secure the pole in a vice or secure it with a clamp to a flat board.
3. Insert the copper pipe into the hole wooden stand, so that the smaller end protrudes about 25 cm. Mark the intersection point with a marker.
4. Using a 6mm bit, drill a hole at the level of the marker mark on one side of the tube. In the future, you will pass the cord for the lamp through it.

Floor lamp assembly

Figure 1 Figure 2 Figure 3

1. Apply wood glue to the bottom end of the wood post and insert it into the hole in the base. Keep these two parts until completely dry glue.
2. Insert the copper pipe into the top hole of the rack so that the hole is in copper pipe was located near the counter and was turned towards the floor. Once the pieces are in the desired position, connect them using universal glue. Then attach and glue a copper elbow (curved downwards) to the long end of the tube where the lampshade will hang.
3. Insert into hole copper tube(near the counter) electrical wire and push it so that the end comes out through the end elbow.

Lampshade for floor lamp

Figure 1 Figure 2 Figure 3 Figure 4

We will make this original lampshade for a floor lamp from a regular, round, openwork plastic waste paper basket.

1. For more aesthetically pleasing and less similar to a basket - carefully cut the outer side around the circumference with a sharp knife.
2. Cut a hole in the center of the bottom of the basket that matches the diameter of the lamp socket.
3. Apply copper-colored spray paint to the outside and inside of the basket, let dry as directed, and apply a second coat to completely mask the plastic.
4. Pull out the electrical cord to a length convenient for work, attach the socket along with the lampshade and pull the wire back, leaving the desired length.

Insert a lamp (preferably LED) and... enjoy a pleasant evening relaxation on the sofa with your favorite book.

Lamp made from paper plates, video

website Ideas for a summer residence

Today you can make your home cozy and comfortable for relaxation with the help of a wide variety of design solutions. One of them is a floor lamp.

A floor lamp is a fairly well-known lighting device that was often used in homes in the last century. But today he literally got a second life thanks to different approaches in its design. Our article offers a master class on how to make such a lighting device yourself.

Floor lamp and its meaning

Just with the help of one lamp you can completely change the worldview of a room. And we are not talking about a chandelier here, but about such an already slightly forgotten model as a floor lamp. Using this floor lamp indoors will help you achieve the following:

• local lighting of a certain area in the room. Using a floor lamp, you can illuminate an armchair, couch or any other piece of furniture on which it will be convenient to read;
• add romance to the atmosphere;
• combine several styles. For example, combine Eastern Japanese and Western European;
• complement the interior with an original detail.

Floor lamp in the interior

In addition, you will always have the opportunity to move the floor lamp to another place. This opens up new opportunities in terms of changing the decor in the house.

What to make from

Wood floor lamp

Any master class on creating a floor lamp begins with what may be needed during the assembly process. Today, a floor lamp can be made from a wide variety of different materials:

• elements made of wood. Creating a wooden floor lamp with your own hands will help you bring natural motifs, warmth and comfort into your home. So, a lampshade made of branches will look very beautiful. When using wood as a leg, consider protecting it from possible fire;

Note! Wood products in modern renovation very appreciated and popular. This is due to the growing popularity of the “eco” trend in modern design thought.

• plastic;
• metal;
• textiles and paper. You will need these materials if you decide to make a Japanese-style lamp.

In addition, you cannot do without the following materials:

• leg. Its role can be a wooden base, a hollow metal or plastic pin, etc.;
• electrical cable. For metal legs It is better to take a three-core cable;
• sockets for light bulbs. They can be taken from an old lighting fixture;

Light

• bulb. If there are paper or textile parts, it is recommended to use energy-saving, cool-down light bulbs.

Note! Great solution there will be an LED light. With her the floor lamp will give good light without creating even a hint of a fire hazard.

Fastening elements are also needed: screws, glue, wire, twine or ropes.
Tools you may need:

• drill;
• screwdriver;
• pencil;
• ruler.

Depending on what type of floor lamp the master class is designed for (plastic, wood, metal, etc.), the above lists may undergo some correction.

Let's start assembling

Drawing option

Any type of floor lamp consists of three main components:

• stand;
• leg;
• shade.

Let's look at each of these elements separately. If you strictly follow the instructions, you will cope with the upcoming amount of work without any problems. The only thing you will need is knowledge of electronics.
To simplify the work, you can make a preliminary drawing with all dimensions.

You can make a stand with your own hands as follows:

• You can use wood for the stand. The shape of the floor lamp base can be very diverse. The main thing is that the stand can hold the lamp steadily;
• then, when the base is ready, we proceed to connecting the cable with the socket and the electrical plug;

Ready stand

Note! All joints on the wires must be well insulated.

• We connect the stand with electrical elements.

After this, we proceed to making the legs:

• the best solution would be to use a metal hollow cylinder. Its weight will help balance the entire structure and also avoid a fire hazard. For this reason, it is better not to make a leg out of wood, but, of course, it’s up to your wishes;
• We run an electrical cable inside the legs. This can be done before attaching the leg to the base.

As you can see, there is nothing complicated, and most of the device is already ready. Now all that remains is to make the lampshade with your own hands and the work can be considered finished.
Making a lampshade is a process in which you can show your creativity. If the leg and stand are made according to similar drawings for almost all similar lamps, then the lampshade can be unique. It can easily be made from any materials that you like. These could be branches from the forest, fabric, special paper and even plastic bottles.

Note! It is the lampshade that is the element that gives the floor lamp its similarity to a particular style. It can be Japanese, classic, modern, hi-tech or other styles of your choice.

You can make a lampshade according to the following scheme:

• Use the wire to form a lampshade shape. For these purposes, it is better to use a rigid type of wire that can hold its shape well;
• Attach the side elements to the wire form. It can be fabric, paper or twigs connected to each other.

Getting the lampshade ready

When making a lampshade, try to do everything carefully so that the places where its elements are fixed are less noticeable. But if you didn’t do it very carefully, don’t worry, all the imperfections can be hidden with decorative design.

Decoration

Floor lamp decor

When using branches to create a lampshade, the floor lamp does not need to be decorated, since the branches themselves act as decoration here. In other cases, you can use the most intricate and original materials for decoration (however, if desired and if it is appropriate, you can also use them for branches):

• beads or rhinestones;
• buttons;
• various weaves;
• applications. Here you can use it like autumn leaves, as well as crafts made from cardboard and colored paper. As a result, the lighting will take on a fairy-tale hue;
• shells;
• small size toys. You can simply hang them from the lampshade from below. This option will look great in a nursery.

You used fabric or paper for the manger, it can be decorated with hand painting. This is suitable for those who can draw.
Now you know where to start creating a floor lamp, and how to finish decorating it, and you can show real class to all your friends and household members.
As you can see, you can easily make a floor lamp with your own hands if you follow the instructions. At the same time, here you can easily show your imagination by creating a unique and beautiful floor lamp that will fit perfectly into the interior of the room. And since it is made by yourself, you will be doubly pleased to admire and use such a floor lighting fixture.

Correct soldering LED strips
How to properly organize lighting for work areas

Lighting is an important functional and stylistic part of any thoughtful interior. Lamps will help you completely transform any room. Central ceiling lighting has long since sunk into oblivion. Today sconces, floor lamps, bedside lamps, Spotlights on the ceiling and individual lighting allow you to zone the space and create coziness.

Of all the variety of lighting fixtures, the most “homey” and cozy, without a doubt, can be called floor lamps. The soft light gently pouring from under the lampshade relaxes and soothes, bringing peace and peace of mind to life.

Experiencing a rebirth after some oblivion, floor lamps happily settle in every home to give peace to their owners.

The undeniable advantages of floor lamps

A floor lamp is a floor lamp on an adjustable (sometimes flexible) or fixed rod, resting on a stable base. The light bulb is usually covered with a lampshade made of a variety of materials, but there may be options without it.

Unlike other light sources, a floor lamp has the following advantages:

• it refers to mobile structures, the placement of which indoors does not imply preliminary work, for example, fastening the structure to the wall, laying new wiring. To install and operate the floor lamp, it is enough to move it to the part of the room required for lighting. The main requirement is the availability of a source of electricity;
• using it you can easily zone a room. In this case, it is better to install it in a recreation area;
• floor lamps, due to their design, allow illumination of only a certain place, which indicates the possibility of creating a stream of directional light and, in turn, saving energy;
• Floor lamps are compatible with any interior style and in absolutely any room.

Modern floor lamps have amazing beautiful shapes, made in a certain style and are able to decorate a room, bring comfort and coziness into it, and radically change visual perception space.

How to make a floor lamp?

Undoubtedly, designer floor lamps, presented in showrooms, are distinguished by their originality, practicality and elegance, but, as a rule, many are somewhat repulsed by these aspects. A floor lamp is associated with warmth, comfort, and spiritual harmony, which is why today people are increasingly purchasing products self made, in which a piece of kindness is invested, and not mass-produced products.

You can make a floor lamp that will fit perfectly into your interior, will meet all your requirements, and will warm and delight your heart. This will require a minimum of knowledge of electronics, a minimum set of tools and the desire to create a unique floor lamp with your own hands.

Principles of hand-made light production

Floor lamps serve, first of all, a practical function. Their role is to create the necessary lighting, which will give the room the necessary color, atmosphere, mood. It could be bright light, and mysterious twilight, and a bright spot of light. The only thing that should not happen is hiding the light when using rough and opaque decorative elements.

In order for a lamp you created yourself to delight you for many years, you should think about safety standards. To avoid electrical short circuits, all joints are insulated and hidden behind decorative elements.

It is also necessary to abandon or approach as seriously as possible the creation of lighting equipment for bathrooms, toilets and other rooms with a high degree of humidity. In this case, additional moisture insulation is required, which is quite difficult to achieve at home.

Important! When choosing a material to form a lampshade, you must take into account that fabric, paper or other materials used to create a lampshade should not hide the light.

Using various technologies By combining them at your personal discretion, you can create an original item that will add a “zest” to your interior.

Master class on creating a floor lamp from scrap materials

When you get tired of ordinary lampshades and want something original and exclusive, you just need to dream up your imagination and give yourself some time to implement the idea. Anything that can be useful for a floor lamp (that comes to hand) will be used, for example: the frame of an old (possibly broken) lampshade, a rope, a bunch of branches. So let's get started:

Step one is preparing the base. To make a floor lamp, it is necessary to select a suitable structure for the frame. In our case, we use a retro floor lamp that has been gathering dust in the attic for half a century. You can also make a frame from wooden planks. We remove the remaining fabric, various screws and other unnecessary parts, completely exposing the frame. Use sandpaper to remove rust.

Step two is lighting. The base for the lighting set is made of wood. You will need a round timber 5 cm high. Using a metal bracket, we attach it to the frame. At a hardware store we purchase a pre-assembled lighting kit and a dimmer. We mount it to the base.

Step three – decoration. Having prepared the branches, long from the top to the base, we begin to form the floor lamp. First, we tie the structure with a rope, which will serve as a holder for branches and decorative element. The branches are laid out in a row and attached to the frame. The upper edges of the branches are trimmed and given an aesthetic appearance. The branches are tied with rope in several places.

Step four - finishing work. The floor lamp is equipped with a light diffuser, which can be made using tracing paper. It is rolled up and inserted into the center of the lampshade. The lamp is screwed in, it’s better if it’s a “housekeeper” - it doesn’t get so hot. Ready! Making a floor lamp is not that difficult.

The dimmer will help you choose the degree of illumination you need, depending on the situation and your preferences.

Like this in a simple way You can make such an original and practical decorative element yourself using improvised materials. Bring your ideas to life and create exclusive things that will decorate your cozy nest.

A floor lamp, created with soul and with your own hands, will give you warmth and comfort.

Variety of stylistic options

To make your interior look as natural, relaxed and at the same time sophisticated, the main thing in choosing a floor lamp is not to make a mistake with its stylistic design.

Art Nouveau floor lamps

A combination of modern design solutions, natural motifs and materials, and traditional, familiar forms, but without pomp and pretentiousness. This various shapes designs, from the simplest, “strict” geometric shapes with clear lines to intricate “winding” ones, with a lot of decorative elements.

Hi-tech floor lamps

Functional, aesthetic and practical lighting. High-tech high-tech floor lamps allow you to change the angle and direction of the light beam, the height of the lampshade, and the intensity of lighting. Futuristic, bold and creative approach, experiments with geometric shapes and lines – these are high-tech floor lamps.

Floor lamps in loft style

Loft is the most unhindered style; it allows free mixing of various directions and manners, it is completely open to all kinds of experiments and special design solutions.

Strict beauty and minimalism, straight lines and discreet shades will ideally complement the design of the room. Their original design fascinates true fans of contemporary art and connoisseurs of everything unusual and non-standard.

Lighting in Provence style

Laconism and simplicity are the two main rules of the Provence style. Natural and natural materials, used for a floor lamp, will add lightness and spaciousness, freedom, and clean air to the house. Smooth lines, curved graceful shapes, calm, natural shades will create harmony, beauty and tranquility.

Reading a newspaper or book on your favorite chair can sometimes be difficult due to lack of light. It is irrational to buy a lamp, but making a floor lamp with your own hands is much more economical - you can move it from place to place, adjusting the lighting as conveniently as possible for reading. In addition, such a product will perfectly complement the interior. Wood is used as the material for its manufacture - below is a master class in which ash is used to make the lamp.

When deciding how to make a floor lamp yourself and at home, it is not enough just to know the dimensions into which the parts will be cut. The instructions below provide all the information on this process - from marking to assembling the product.

We cut out the following elements of the future floor lamp:

• sides (A) of the stand;
• front part (C) of the rack;
• back (B) of the rack;
• bar E, which will be located on top;
• sides of bracket D.

Parts A, B, C and E must be made with a length allowance of 25 mm, shown in more detail in the drawings below. The purpose of allowances will be described further in the text.

Note! If the blanks for the sides of the stand and the holder are fastened with double-sided adhesive tape, then it will be possible to quickly mark all the lines, intersection points, locations of future holes, and “in one fell swoop” cut out all the same or symmetrical parts.

On each pair of blanks we mark top points and ends of arcs. To make a flexible pattern, we cut out a 50x1830 strip from MDF 12 mm thick - it will help mark the arcs on two pairs of blanks. In this way, uniform and smooth arcs are drawn at long lengths and during production different furniture, where necessary.

After that:

• mark the cut corners at the end of each pair of blanks;
• on the sides of A we mark the length of the back of B;
• At the ends of the sides of bracket D we mark semicircular cutouts.
• In all places indicated in the drawings we make holes with a diameter of 6 mm.

Focusing on the marked areas and making an angle, we file the ends of the holder D and the sides A of the stand. With help band saw We cut out the blanks along the marked contour, making an allowance on the outside. After that, we sand everything and separate the pairs of sides (we use white spirit to remove traces of tape).

We cut out tongues (grooves) on the back part B of the rack, and folds on the nearby part C.

Aligning the ends of the sides, we place the workpieces on the table so that their curved edges look up. We attach the back part B to them with a clamp, marking the angle of the lower bevel on it. We adjust the protractor to the same angle and use a miter saw to saw off the bevel at the end of the back plank.

Wooden material is good for work because you can always use its trimmings. In our case, we need to cut out 3 inserts from them, each 25 mm wide. They will separate the sides A. To do this, we place them with the curved side up on the carpentry table, using clamps we fix the back part of the post B on them, after which, transferring the marks from them, we mark its final length. After removing the clamps, we file the back strip to the desired size.

We apply glue to the grooves of the rear part B of the rack, fasten it to the sides A, aligning the lower ends, after which we fix the entire gluing. Why all these manipulations are needed, you can see in the detailed drawing above.

Note! To make a floor lamp with your own hands even and beautiful, you need to insert bolts or studs into the holes for a while. This will align the sides. In order to install the rear part as best as possible, it must be pressed with clamps, and all work must be done starting from the bottom and moving up.

In the upper bar E of the holder we cut out dowels measuring 10 mm.

We set the saw blade at an angle of 13 degrees, after which we saw off the long part of the top bar to the length indicated in the overview detailed drawing above. Now we set the tilt of the disk to 16 degrees and saw off the short part of the top bar, using the same pattern as a guide. Aligning the ends of the sawn parts, glue them to the sides of holder D.

Making the base

The base of the product is also made of wood with your own hands. From the material (19 mm thick) we cut out:

• top bar F;
• upper rear part G.

When making blanks for the lower parts, we take into account the following nuances:

• the bottom bar H is made 3 mm wider and 6 mm longer than the dimensions indicated in the figure;
• the lower rear part of I is made 3 mm wider than the indicated dimensions.

Stepping back 25 mm from the edges of the upper rear part, we make oblique holes. We glue the part itself and secure it with self-tapping screws to the upper front blank.

To make a floor lamp with your own hands into a fully functioning piece of furniture, you need to think about how electricity will flow into it. Therefore, as shown in the figure below, at the bottom of the central part of the lower rear workpiece I we cut out a tongue (groove) of 10x10 mm - this will be the place for electric cable. After this, we make another 3x19 mm groove in the center of the cut hole.

Based on the drawing below, we drill oblique holes, making an indent of 25 mm from the edges. Now, we glue the result of our labor and secure it with self-tapping screws to the lower workpiece N.

Click to enlarge

We mark the shape of the top layer of the F/G base, cut it out and sand it. We place these blanks on the lower H/I, aligning them so that the end of the upper rear part G is shifted 10 mm relative to the end of the lower rear part I.

To mark the contours of the lower layer H/I, we outline the upper blanks F/G (photo above), making an allowance of 10 mm. In this case, instead of rounding the corners, we draw straight lines. We drill holes in the parts of the lower layer from below for subsequent screwing in four self-tapping screws. We process the drilling places with a countersink, after which we separate both layers of the base.

Based on the base diagram above, we make holes:

• in the front upper F and lower H parts measuring 10 mm;
• in the lower front part H - 38 mm.

After this, we cut out the bottom layer of H/I according to the markings.

We cut out the brace J, leaving the edge of the workpiece rectangular shape(no long bevel).

We fix it with clamps, after which we press the previously prepared part of the A/B rack against it (its lower part should be adjacent to the carpentry table for ease of connection). Now we transfer the markings of the rear part of the B pillar to the strut and cut out the required workpiece. After this, we sand it, and treat the sharp edges with sandpaper or a carpenter’s file with fine teeth.

We glue part J and secure it with self-tapping screws to the top layer of the F/G base. Then we glue and fasten with self-tapping screws the assembled blanks of the lower H/I layer.

We cut out the K strip (it will cover the network cable), grind it and glue it into the groove, as shown in the photo.

Attach the stand to the base

We press the stand to the strut. We drill a hole into it through the rear part B of the rack and screw in a self-tapping screw.

On the upper front part of the base F we mark the location of the A/B pillar, after which we remove it. Drill holes F and K through the base. Then the holes from the bottom need to be countersunk.

We glue the A/B post to the J strut, then reinforce it with screws. In the sides of the rack, through the holes made in the base, we drill guide auxiliary holes. We secure the stand to the base with self-tapping screws. Using clamps, we press the front part of the post C against the sides A, which fit into the folds, marking the bevel angle at its lower end, after which we remove the clamps and file the bevel according to the markings. We reattach the workpiece in place, press its lower bevel to the base and transfer the markings from the sides to mark the final length. We file down the nearby plank and attach it to the sides of the post.

Installing the holder

Mark the shape of the hinge plate L and the place where the central hole will be located. We cut out the workpiece according to the mark and sand it along the contour.

Having turned the holder D/E over, we place it on the table for carpentry and between the side parts D we insert an intermediate piece, the cross-section of which is 6x6 mm. We place the hinge plate on it, aligning the hole markings made on it with the central hole of the sidewalls. Using clamps, attach the supporting trim to the side that is located further. Insert a drill into the hole on the side that is closer, then drill a hole through the entire plate. We take it out, sand it, secure it between the sides of the holder using 25 mm furniture ties (2 pcs.).

We insert the assembled D/E/L holder between the sides of post A and secure it with a 50 mm furniture tie. We install the end of the holder horizontally, and then fix it with a long piece.

We press 6 mm thick cuttings against the hinge plate L on both sides with clamps and drill one hole. Raise the end of the holder D/E/L by 130 mm and drill a second hole through the plates L. We drill the last hole after the structure has been raised another 130 mm.

Making the M head:

• on a piece of 13 mm thick cutting we mark a circle (the diameter should be 25 mm);
• drill a 6 mm hole in the middle of the circle;
• We cut the workpiece around the circumference and sand it with 220 grit sandpaper.

From a 6 mm steel rod we cut a piece 76 mm long. We apply glue to it and insert it into the head M (the tip of the rod should protrude 6 mm). After the glue has dried, insert a locking rod into the holes in plate L and the sides of pillar A.

Adding a lampshade

The lampshade for the lamp being manufactured can be anything. You can buy it in a store or look among old things. The product will look more original if you show your imagination and make a lampshade for the floor lamp with your own hands. In addition, the frame for the floor lamp is quite simple to make.

To make the components of the holder - strip N and plate O - we cut a blank from a material 20 mm thick, the size of which is 6x305 mm. Stepping back from the two ends of the workpiece by 5 mm, we make a groove, as indicated in the drawing. We saw off one strip N from each end and fasten them using Double-sided tape. We drill holes d5.5, and make roundings on the parts while they are not yet separated.

In the remaining part of the workpiece, divide the width by half and drill a hole d10 in the middle, retreating 16 mm from one of the ends. We saw off a piece 32 mm long (a hole should be drilled on it). We glue the resulting fastening plate O to the strips N and fix it using clamps.

We remove all the fittings, carefully sand everything and apply a finishing coat.

How to make a lampshade with your own hands from a basket. Video instruction.

Assembling the product

We assemble all parts of the product except the N/O fastening. We pass the network cable through F-K base And A-C pillar, passing it around the hinge plate L and through the holder D/E. We leave an end approximately 90 cm long, on which we put:

• bushing with internal thread;
• nut;
• N/O mount;
• decorative sleeve;
• part of the tube having an external thread.

We fix everything on the mounting plate O using a sleeve with internal thread.

In the lampshade, insert the tip of the wire into the mounting hole and add two nuts. By tightening one of them, we secure the lampshade, leaving the second one slightly movable. We thread a wire into the socket of the socket for two light bulbs, and fix the socket itself with a sleeve with an internal thread (the fixation is carried out on a tube with an external thread).

Click to enlarge

We tie the ends of the wires into a special knot and connect them to the cartridge wires. We pull back the excess part of the wire and close the structure with a lid.

We attach the N/O holder to the sides of holder D using 38 mm furniture ties. After this, we pull part of the wire through the stand of the product and install the power plug.

The product will not work unless a lamp is inserted into it. In our case, we will need two light bulbs. We screw them into the product and check its functionality by inserting the plug into the network.

List of materials and parts

Examples of floor lamps