An interior partition is a wall that divides the space in a house or apartment into several separate rooms; they can be divided into several types - stationary, transformable and mobile. Next, we will briefly look at each type of interior partition.

Stationary interior partitions

This is the most common type of partition that is used as a permanent separation internal space houses or apartments into separate living quarters. These partitions have a specific installation location according to internal layout and are a lightweight (non-load-bearing) wall, which in turn has a capital connection to load-bearing walls, To ceiling and to the floor of a house or apartment.

According to their design, stationary interior partitions can be divided into:

Advantages and disadvantages of stationary interior partitions

• Possibility of high-quality sound insulation.
• Possibility of attaching hanging furniture and other interior items to partitions.
• Possibility of installing partitions of various configurations and sizes.
• Wide choose constructive solutions on the installation of stationary partitions, as well as building materials for their device.
• Possibility of laying communications inside the partition (laying electrical cables, device ventilation shafts and so on.).
• Possibility of construction in rooms with high humidity (depending on the choice of material).

Flaws:

• High labor intensity of work during construction and redevelopment.
• Must have skills in carpentry or laying building materials.
• When installing stationary partitions in the room, there may be significant generation of dust and construction waste(depending on the choice of building material).

Sliding interior partitions

Which, just like stationary partitions, are designed to divide space in a house or apartment. But unlike stationary ones, sliding partitions have a movable (transforming) wall panel. So such partitions have the property of both permanent and temporary division of the space of the home.

The basis for sliding partitions are the upper and lower guides, which in turn are attached to the ceiling and floor of the house or apartment. Another similarity between a sliding partition and a stationary partition is that the base of the sliding partition is attached to the ceiling and floor of the house.

Advantages and disadvantages of sliding (folding) interior partitions

• Possibility of zoning small premises
• The installation work of this type of partition is relatively less labor intensive, unlike a stationary one.
• If a partition is not required at one time or another, then due to the mobility of the wall panel, such a partition can be removed.
• The use of this type of partition emphasizes the originality of the interior of your home.

Flaws:

• Low level of sound insulation of premises.
• The need to install a threshold due to the bottom guide or to install a recess in the floor for installing a guide so that there is no threshold between rooms.
• You cannot attach hanging pieces of furniture to such partitions - shelves, cabinets, as well as other interior items. You cannot place a sofa, armchairs, wall or other furniture next to folding partitions, since the furniture in this case will prevent the partition from opening. In general, the design of a folding or sliding partition, according to its functional purpose, does not provide for the installation of any interior items or furniture near it.

What conclusion can be drawn from the material read? For the arrangement of separate rooms inside a house or apartment, preference can be given to stationary partitions that have a large number of advantages, versatility of design solutions and areas of application, as well as diversity in the applicability of building materials.

But transforming partitions also have a number of positive characteristics, so it would be a mistake to ignore the design and operation of this type of partition. We will definitely talk about all these points when installing stationary and transforming partitions in the following articles on the topic of interior partitions.

Mobile partitions

Mobile partitions are partitions that are not tied to the main ones structural elements houses or apartments, and are not tied to the structural elements of the house or apartment. The use of such partitions is mainly in office premises.

Screens can also be classified as mobile partitions. The screen is not the main type of interior partition, but at the same time, like all other types of partitions, the screen encloses a certain space in the room and can be freely moved to any place in the room. The screen also serves as decoration for the interior of the room in which it is installed.

Decorative interior partitions

This type of partition does not have the basic technical requirements like all the other partitions listed above, they are soundproofing of interior space, a major division of living space into separate rooms, etc. The purpose of this type of partition is to zone the living space. You and I do not see a full-fledged solid dividing wall, but a decorative partition helps the eye to determine that the room has different purposes for its total area.

Decorative partitions can be made of wood, stone, glass or combined using various building materials. It all depends on the interior design of the room that needs to be divided with the installation of this type of partition.

All of the above about decorative partitions - their purpose can be seen in the photo. The main use of such partitions is the layout of a studio apartment, where the interior design does not include partitions with solid walls, this type of partition is also suitable for zoning space in small apartments.

Requirements for interior partitions

Let's consider the key requirements for interior partitions, regardless of their design features.

1. Reliability of the design, ensuring safety for residents of the house or apartment.
2. Based on the quality of the materials used, the partitions must have a service life equal to the service life of the house (apartment).
3. Meet the sound insulation requirements for separating living rooms and premises, that is, the sound permeability of partitions between living rooms and indoors should not be lower than 43dB*.
4. To install partitions on the second floor or in the attic, you must place a minimum load on interfloor covering at home, that is, the partitions must be made lighter in comparison with the partitions on the first floor of the house.

*- SNiP 23-03-2003 “Protection from noise”. Section 9 “Sound insulation of building envelopes”.

Let's pay attention to point 3 about sound insulation. As can be seen from the specified requirements of SNiP we're talking about about noise transmitted through the air - conversations of residents, the sound of a working TV, etc. But it should be remembered that in addition to this, impact and especially structural noise may be present in the home.

Structural noise can arise and be transmitted through partitions when vibrations occur, for example, a subwoofer is installed on the floor in a room; low-frequency waves during its operation will cause vibrations and vibrations that will be transmitted between rooms not only along the floor, but also through interior partitions. This can also be attributed to the operation of a vacuum cleaner, washing machine and so on.

So the issue of insulating any form of noise origin should be approached with special requirements. We will talk about this when we consider the issues of installing interior partitions. Further, in the continuation of the material, we will touch upon the issue of choosing one or another type of interior partitions.

Criteria for choosing the type of interior partitions

Before you start choosing and installing an interior partition, you need to decide on its functional purpose, that is, for what purpose this partition will be installed.

If a partition separates living spaces, for example, a recreation room, a children's room, a bedroom, then in this case it is necessary to install a stationary partition with high sound insulation rates. It is also necessary to take into account that in residential premises, as a rule, shelves are attached to partitions, wall cabinets etc., and this suggests that when installing partitions it is necessary to pay attention to the strength of their structure.

The partition separating the bathroom from the rest of the rooms must be moisture resistant, since in this room high humidity air. In this case, it is also appropriate to choose a stationary interior partition with an additional vapor barrier device for the walls of the partition, which are located in the bathroom of a house or apartment.

If you need to divide a separate room in a house or apartment, you can resort to installing a folding partition. For example, if you need to divide a children's room into two parts - a place for relaxation and activities and a place for games or sports. In this case, a sliding partition will help solve the issue of zoning this room with minimal loss of total area.

Stationary partitions are used wherever beauty, reliability, seriousness are needed, where necessary business style and the comfort of an office where you need to be fashionable and keep up with the times!

The partitions consist of an aluminum frame with various filling options.

The main advantage of stationary partitions is excellent sound insulation, the level of which can reach more than 45 dB.

The frame of office partitions consists of aluminum profile thickness from 68 to 82 mm, which creates excellent stability and allows the installation of structures up to 5 m high.

Cost of stationary systems

Blind partitions

Blind systems consist of an aluminum frame and plasterboard covered with vinyl covering, laminated chipboard can also serve as filling. To improve sound insulation, the systems use isover.

Price: from 2,150 rub. per sq.m.
Calculation example

Combined systems

Combined systems allow you to arrange blind and glass sections in various options. As a rule, the lower part of the structure is made blank, which helps protect the structure from mechanical influences, and top part made transparent or matte (striped or solid matte).

Price: from 2,270 rub. per sq.m.
Calculation example

Transparent fixed partition systems

Transparent stationary systems can be with either single or double glazing. Can be used in transparent stationary systems various options glass matting (frosted film, sandblasting, impact-resistant film.) Matting is suitable for partitions with both double and single glazing. It is possible to install tempered glass in the partitions.

Price: from 2,300 rub. per sq.m.
Calculation example

Systems with blinds

Both completely transparent stationary partitions and combined ones are equipped with inter-frame blinds. Blinds in a partition system can be installed in double or single glazing. The blinds are opened and closed using a control knob mounted on the strip in convenient location. Blinds are also installed in glass doors. In this case, the control handle is installed on the door lock handle.

Price: from 3,700 rub. per sq.m.
Calculation example

Doors

Office systems include door blocks with different door options.

By opening type:

• SWING
• PENDULUM (open at different sides);
• SLIDING (similar to doors in sliding wardrobes).

By appearance door leaf:

• BLINKED (Opaque office doors made of various materials are most often used in blind systems)
• TRANSPARENT (Single or double glazing, blinds can be installed, various matting options are available)
• ALL-GLASS (All-glass tempered sheet 10 mm thick.)

Application area

The scope of application of partitions is almost limitless: Offices of all types, business centers, shopping centers, sports and entertainment facilities, government and educational institutions, fitness centers, bars and restaurants, industrial and warehouse premises.

Used in partitions various materials covering and filling. Blind partitions are filled with vinyl-coated plasterboard or laminated chipboard; they are used to improve sound insulation. mineral wool(isover), it is installed inside the structure. M1 display glass from 4 to 10 mm is installed in transparent partitions. thickness, depending on the purpose and size of the section.

The structures are assembled directly at the customer's site. This allows you to adjust all the components of the structure with maximum precision and avoid all the unevenness of the room. With the help of partitions you can correct almost any unevenness in the room. For good sound insulation, completely blind partitions with an isover inside and filling the ceiling space are optimally suited.

Depending on the height of the office partitions, different frame posts are used. If the height of the partitions is less than 3.5 m, a narrow stand with a width of 26 mm is used. If the height of the partition exceeds 3.5 m, a standard 40 mm wide stand is used.

The glass in the partition can be raw or tempered, covered with various matte films, as well as sandblasted, or smart glass can be used. You can install blinds between the glass of stationary office partitions various types and flowers. IN office partitions doors are being installed various configurations: solid, all-glass, doors with double and single glazing, sliding doors. It is possible to install blinds and various matting options inside the doors.

Stationary office partitions are the main activity of the Monolit company. By contacting us, you will receive professional advice on arranging office space, advance paynemt cost of partitions, furniture, office chairs. If you need a measurement, our employee will come to your office within a few hours. Our managers will help you with the choice of coating materials, offer options for arranging structures, and take measurements using professional tools.

Installation time for partitions

Installation of stationary systems is carried out by highly qualified specialists with extensive experience in this field; only professional tools and expensive measuring instruments, which ensures excellent product quality.

The installation time for partitions depends on the volume of the order and the materials used. Usually, full cycle installation from order completion to completion of installation takes from 5 to 10 working days.

Blind partition- for small volumes, installation is carried out on the day of delivery.

Glass partition - after installing the frame, measuring and cutting of glass is required, glass cutting is carried out in production, for this reason, the completion of installation is postponed to the next day.

Combined office system - installation is similar to glass. Using the same principle, a partition with blinds is installed.

Do you want your house or apartment to be cozy and functional? Keep up with the times and use modern design solutions? Contact Color Doors and order stationary partitions! They allow you to effectively use free space(which is especially true for small rooms), and they also look great and have excellent strength characteristics.

Buy stationary partitions in Color Doors means to get universal tool, allowing you to change the configuration of any room at your discretion.

What do we offer?

The Color Doors company is a manufacturer stationary partitions for apartments. We offer high quality products that will last a long time. Our customers have the opportunity to purchase stationary glass partitions , as well as structures made from MDF and natural solid wood. Whatever material you choose, you can be sure that the result will exceed even your wildest expectations.

They work for us experienced designers who will develop a sketch of the product based on the interior features of the room in which it will be installed. configuration, color scheme and they will select the design of the product in accordance with your wishes and financial capabilities. If necessary, partitions can be equipped with doors.

Our prices

Prices for stationary partitions in "Color Doors" vary in wide range. We are ready to offer excellent budget options, as well as luxury premium products. The cost is calculated individually, as it depends on a number of important factors:

• materials for production;
• components;
• size and complexity of the design;
• partition configuration;
• presence/absence of decor.

Features of stationary partitions

Stationary wooden partitions must be fixed to the floor, walls and ceiling, since they represent a permanent wall structure, that is, they play the role of regular wall. However, unlike it, they take up minimal space, and their installation does not require expensive repair work and a lot of time.

Their design features are such that they allow the installation of doors different types opening. As for the decor, they can be very diverse, especially in the case of all-glass partitions, which can be decorated with stained glass, tinted, engraved, and decorated with fusing.

"Color Doors" are modern, economical and stylish solutions for your home!

Dear customers, we offer you wide choose interior partitions of any type and type. Our specialists work with each client individually - you can choose sliding structure made of veneer, solid beech, oak, with elements of glass, triplex or stained glass. Prices for interior partitions depend on the type, size, design, number of sections and complexity of installation in the opening.

Just call us and we will help you with your choice and answer all your questions.

Sliding partition - space saving!

A sliding partition is different from sliding door sizes. Externally, this design covers a wider opening with a leaf or doors than required for a standard door.
An interior partition significantly saves space, divides rooms into functional zones, and provides good sound insulation.

What are the types of partitions?

The main advantages of sliding partitions:

Options for opening sliding partitions

Do you want to install sliding partitions?

Below is the price list for sliding partitions made of solid beech with a standard pitch, 50 mm in width, 100 mm in height

Blade height Blade width	up to 200 cm	up to 230 cm	up to 250 cm	up to 270 cm	up to 290 cm
up to 60 cm	RUB 9,955	RUB 11,445	RUB 13,690	RUB 15,540	RUB 17,120
up to 70 cm	RUB 11,615	RUB 13,355	RUB 15,070	RUB 17,675	RUB 19,310
up to 80 cm	RUB 13,270	RUB 15,265	RUB 18,250	RUB 20,290	RUB 22,495
up to 90 cm	RUB 14,930	RUB 17,170	RUB 20,535	RUB 22,325	RUB 24,680
up to 100 cm	RUB 16,588	RUB 19,180	RUB 22,800	RUB 24,360	RUB 26,870
up to 110 cm	RUB 23,700	RUB 29,650	RUB 32,620	RUB 35,110	RUB 38,270

Width from 500 mm. up to 1000 mm. in increments of 50 mm. - no extra charge

Width from 400 mm. up to 1100 mm. with any step - 30% extra charge

Height from 1800 mm. up to 2900 mm. in increments of 100 mm. - no extra charge

Height from 1200 mm. up to 2300 mm. with any step - 30% extra charge

Height from 2300 mm. up to 2500 mm. with any step - 50% extra charge

Height from 2500 mm. up to 2900 mm. with any step - 100% extra charge

When calculating the cost of sliding partitions, you should consider:

• The height and width of the opening in which it is planned to install sliding partition(in centimeters);
• Method of fastening the structure. When installing in an opening or on a ceiling, subtract 10 cm from the “height” dimension. When attaching to a wall, the “height” parameter must be increased by 2 cm;
• Planned number of sashes + cost of construction and fittings.

After sending an application for calculation, our company’s employees will process the information specified in it and contact you to clarify the cost, production time and delivery conditions of sliding partitions.