A garage is a multifunctional space. In it you can install and repair cars, design and make various things and mechanisms with your own hands.

If a person likes to spend time in the garage doing repair work, he needs to properly equip his workplace. A workbench is a multifunctional work table on which you can process various materials, carry out plumbing, electromechanical and installation work. Also in the design of the workbench, you can consider shelves and drawers to store tools and other items.

Types of workbenches

Workbenches are made for processing metal (metalwork) and wood (carpentry). The designs differ in the material of the countertops. For metalwork models, the table top must be metal, since working with metal involves the use machine oil and other liquids that are wooden surface may leave marks.

Also when processing metal parts effort and the use of a sharp tool are often required, so it is best to equip the workbench with a metal tabletop.

Woodworking benches are designed for working with wood, so they are not as durable or functional as bench models.

Workbench design

If the design of a work table for a garage is made by hand, then first of all you need to carefully think through every detail, figure out where the tools will be placed, what work will be carried out on the workbench. The model of the garage table depends on this.

Standard models are often equipped drawers, which can be made from wood or metal. Also, the table design can be supplemented with shelves, a power shield for hanging tools, which will always be at hand. But most importantly, the workbench must be stable, durable and reliable.

Tool

Grinder with a circle for cutting metal and a grinding disc.

Welding machine and electrodes. Workwear and protective devices for welding work.

2. Screwdriver.

   Jigsaw for cutting plywood.

Materials

Angle 50 mm by 50 mm, thickness 4 mm, length 6.4 m.

Square pipe 60 mm by 40 mm, thickness 2 mm, length 24 m.

Angle 40 mm by 40 mm, thickness 4 mm, length 6.75 m.

Steel strip 40 mm wide, 4 mm thick, 8 m long.

Steel sheet for tabletop 2200 mm by 750 mm. Thickness 2 mm.

Steel sheet for making drawer holders. Thickness 2 mm.

Wooden boards for the table top. Thickness 50 mm.

Plywood for making drawers and for the side and back walls of the table. Thickness 15 mm

Guides for desk drawers.

Screws for assembling plywood boxes.

Self-tapping screws for metal.

Anchor bolts.

Paint for wood and metal.

The workbench, which will be made from these materials, has quite impressive dimensions: table length 220 cm, width - 75 cm. The overall design and large tabletop allow you to place a vice and, for example, emery or other tools at different ends of the table.

The first step in making a workbench is cutting the available material into elements. The profile pipe is intended for the manufacture of the frame. The steel angle is designed to create stiffeners. It is cut into pieces and a power frame is formed from it. Also, a steel corner is needed for edging the tabletop on which the boards will be laid.

The steel strip is intended for the manufacture of guides on which they will be mounted side panels. This material will also be used for brackets for fastening boxes and plywood.

Table drawers are made of plywood.

Second step - welding power frame workbench. The tabletop elements are welded first - 2 pipes 2200 mm long and 2 pipes 750 mm each. The frame must be welded so that another frame of corners can be welded on top of it, into which the tabletop boards will be laid. To reinforce the tabletop, it is necessary to weld a few more after 40 cm steel pipes, which will serve as stiffeners.

Then 4 side legs are welded along the edges of the workbench. Their length is 900 mm. Power bridges are welded between the legs to strengthen the structure.

Once the basic frame is ready, you can begin welding the structure for the boxes. To do this, square frames are formed from steel pipes, which are welded to the tabletop on both sides of the table. The frames are reinforced with longitudinal stiffeners.

The third step is making a frame for the tabletop. Two steel angles, 2200 mm long, and two more angles, 750 mm long, are needed to make the frame. The structure is welded so that wooden boards fit inside it.

The angle frame is laid on a pipe frame and welded. The result is a reinforced tabletop, 8 cm high with internal stiffeners.

The metal frame of the workbench is almost ready, all that remains is to weld the panel sheathing for attaching the tool. This requires one metal corner with a length of 2200 mm and 4 corners with a length of 950 mm. Two elements are attached to the sides of the structure and two in the middle for reinforcement. The tool panel is welded to the tabletop.

The frame of corners and pipes is ready. You can begin to strengthen the structure. Brackets are welded to the sides of the table, which are cut from a steel strip. A total of 24 parts are needed. A hole is drilled in the middle of each bracket. Using these holes, the side and back walls plywood tables will be attached to the metal frame of the workbench.

The fourth stage is making drawers for the table. Plywood is cut into blanks, which are screwed together with screws. The number of drawers depends on what will be stored in the table. If the parts are small, then you can build 3 drawers; if the parts are large, then 2. It all depends on personal preference.

You can place drawers on both sides of the table, you can mount pull-out structures on one half, and regular open shelves on the other.

After the drawers are assembled, you need to weld metal strips with holes between the sides of the drawer compartments. The slides for the drawer guides will be attached to these holes on the inside.

The fifth stage is laying the boards into the tabletop frame. Boards 50 mm thick are cut into pieces of a certain length. If you have a long board available, then you need three blanks with a width of 245 mm and a length of 2190 mm. If long boards is not available, then you can lay the blanks across the table. For this purpose, wood 205 mm wide is cut into 10 pieces 740 mm long.

Before laying the wood into the table frame, it must be treated with an antiseptic solution. This will protect the material from rotting and damage by beetles.

Then it is imperative to paint the entire metal structure workbench. This will protect the metal from corrosion. It is best to use a weather-resistant and anti-corrosion coating option. You need to paint especially carefully welding seams. Drops of metal and unevenness are recommended before painting works clean thoroughly. This can be done using an angle grinder with a metal grinding disc.

After the structure has dried, you can begin laying the boards on the countertop. They should not be driven too tightly into the frame. This is due to the fact that wood tends to expand and dry out when temperature and humidity change. It is better to leave a small gap of a few millimeters between the boards. The surface of the wood needs to be sanded, this will simplify installation metal sheet on top of the tree. The boards around the entire perimeter of the table are screwed to the frame with self-tapping screws.

The sixth stage is fastening the top steel sheet. It can be welded to the countertop, but there is wood inside the structure, which can ignite during the welding process. Therefore, it is best to attach steel sheet for hidden screws wooden boards. The metal must first be painted on both sides with a rust converter. This covering material looks like transparent paintwork, is easily restored and reliably protects the metal from rust. You can also paint the metal tabletop with the same paint that was used to cover the frame. It will be beautiful, but over time the paint may scratch and the table will not look very new.

The last stage is installing the drawers on the guides and attaching the plywood to the side walls, shelves and power shield in front of the table. This work can be called finishing workbench. After work with plywood is completed, it must be coated with a composition that will protect the material from exposure environment. Also, do not forget about the design of a power shield for tools. You can attach special hooks or screws to it, from which the necessary things will be hung.

To make it convenient to work at a workbench, you can attach a special lamp with a bendable stand to the power panel. In this case, you can optionally direct the flow of light to the desired location.

Video - The process of making a workbench

Installing a vice on a bench

A vice is an indispensable attribute of a mechanic's workbench. It is not recommended to attach a clamping tool that weighs several tens of kilograms to the tabletop itself. It is best to place a metal gasket 1 cm thick between the metal of the table and the tool. You need to drill holes in the gasket for the anchor bolts. Then, in the same places, drill holes of the same size in the tabletop. The entire structure is fastened with anchor bolts.

Safety requirements for a homemade workbench design

1. If the garage area is not too large, then you can make a smaller table for plumbing work with your own hands. But it is worth knowing that the entire structure must be stable, not sway or budge with little effort.
2. The workplace should be organized so that nothing disturbs a person. When working with a vice, all unnecessary tools should be removed from the tabletop.
3. Corners and protruding parts of the table should not be too sharp or have cutting edges.
4. After repair work behind the workbench you need to clear the workplace from metal shavings, drops of oil and other materials.
5. If homemade workbench made correctly, it can easily withstand a load of 200 kg.

Plywood for board

Video - Do-it-yourself workbench in the garage

Collect carpentry workbench easy to do with your own hands.

A good workbench should be in the household of everyone who works with wood or performs carpentry work.

Before we look at the drawings and start assembling the workbench, let’s get acquainted with its structure and manufacturing nuances.

The workbench consists of a workbench board and a base (underbench).

The board has a vice - one or two, in which the master clamps the parts with screws.

You can place the emphasis directly on the working board of the workbench using wedges that are inserted into holes in the board itself, thereby you can adjust the length of the emphasis in accordance with the length of the workpiece.

The bench board is made of dry wood or plywood up to 8 cm thick. The bench board is made of bars with a thickness of 6 cm.

The underbench is supported by 2 racks, which are transversely fastened together by beams with screws/wedges.

This is necessary so that the workbench does not “move” from side to side when planing and sawing.

Workbench structure in detail:

• The worktop is made of solid wood/plywood with a thickness of 6 to 8 cm;
• Vise on the front of the table top;
• Workbench supports are made of solid wood/plywood, connected by cross bars for stabilization;
• You can install shelves and a tool box on the supports;
• Holes for wedges are drilled in the tabletop to support the workpieces;
• You can make a recess on the side or back of the work board to store tools.

The complete structure of the workbench is shown in the photo below.

1 - cover; 2 - subsurface; 3 - tray; 4 - front clamp; 5 - rear clamp; 6 - sockets; 7 - adjustable wedges (combs)

Workbench dimensions

Here we meet the first important nuance, which cannot be ignored when making a workbench with your own hands - its height and length.

Minimum permissible height workbench – 130 cm, length – no more than 260 cm.

The height of the workbench is adjusted to the height of the person working on it:

• too high will not allow you to push hard, which is important when planing;
• a low workbench will force you to constantly hunch over, which will have a bad effect on your back health after just a couple of months;
• the height will be normal if you stand straight, have your back straight and can place your hands on the board without bending your elbows.

Manufacturing nuances

Making a workbench has its own nuances, the observance of which guarantees the production of a workbench that will perform its functions flawlessly.

There are a lot of nuances, so we structure them in relation to each stage of the future assembly process:

1. Initial stage of work. You need to start with a working board. Someone will rush to look for an expensive solid wood, and not just any kind, but according to science - oak, beech or ash. Experts will advise you to take a ready-made wooden table top, which will cost an order of magnitude less;
2. Working with the future working surface of the workbench. The surface must be made smooth, therefore any wood prepared for the role of a workbench board must be properly sanded. To varnish or not is up to you;
3. An important point is that a workbench is a type of table. Your task, in essence, is to make a table on which they cut not sausage, but wood. Therefore, having assembled the workbench, fasten it thoroughly on four legs and then connect them with transverse slats to each other for stability;
4. Drawers – important element comfort. Take the drawer out of the bedside table and pay attention to how it is installed: there are a pair of guides in the shape of the letter “P” along which the side slats of the drawer slide. Nail two guide rails at a distance from each other equal to the width of the drawer and you’re done;
5. You need a sawing table if you are going to saw. The table is placed 20-30 cm beyond the board itself. It is a small board that is attached to the desktop with screws (see photo);
6. The bench board must be straight. Planing, sawing, burning, carving and other manipulations can be carried out strictly on flat surface and nothing else;
7. Don't forget the wedges! Wedges are needed to provide emphasis when planing the workpiece. In the table, at a certain step (10-15 cm), you need to drill a row of holes (several rows in a row), into which you will then insert rounded wedges. If possible, use a drill bit square holes– square wedges hold the stop better due to their shape than rounded ones, which are prone to deflecting the vector of the applied load - the workpiece will fly out of the stop every now and then.

Practical instructions for creating a workbench

So, it's time to make your own carpentry workbench. Each stage of assembly is accompanied by a description and photo of the process.

At the end practical instructions Watch the video summarizing the assembly process step by step. We do not provide drawings of the folding version, since it is much more difficult to manufacture.

Let's look at the assembly step by step.

Step 1 – take measurements

Is your back very tense or not? If everything suits you, measure the distance from your palm to the floor - this will be the total height of the workbench.

Step 2 - making the legs

Take ready-made bars required height, or buy plywood and cut the sheets into strips of the required width.

Now they need to be glued together: take wood glue or powerful epoxy, put several layers on top of each other, simultaneously gluing them together.

You may need 10 of these strips of plywood for each leg. It is better to glue together 10 sheets of plywood at once and, after drying, cut them into 4 parts.

Step 3 - making the frame of the workbench

We take a ready-made board, 4 cm thick - 4 pieces, which will be the sides of the frame-box and assemble the box, placing the sides on the screws.

In another case, you can also take several sheets of plywood, glue them together and then saw them evenly.

But in order to properly connect them together later, it is better to use a router and lamellas.

Having drilled the necessary holes, we assemble the wooden box: we place it on PVA glue using the dowels of the board, and clamp it with clamps. After drying, we attach the legs to the box with self-tapping screws.

Step 3 – assembling the tool shelf

From glued plywood (5-6 sheets) we cut out a shelf that is placed in the grooves.

The shelf needs to be secured with confirmations: use a special drill (see photo), which simultaneously chamfers and drills.

The confirmation must be recessed, since this part of the shelf will be used as a guide for the drawer. Now the base of the table is ready.

Step 4 – making a drawer for the countertop

We take a sheet for the bottom and again 4 strips of plywood from several glued layers. By internal parties We will make grooves on two side walls for the bottom of the box.

And on the outside of these walls we make grooves by milling so that the box can move freely on the shelves. We select the cutters as follows: the smaller one is the thickness of the bottom, the larger one is the thickness of the side strips + 1-2 mm.

To secure the side wall, we install dowels: drill holes for the dowels at the ends of the walls, mark a point for drilling on the adjacent wall with a pencil and drill to a small depth.

Then we place the dowels in both holes using PVA glue. For final assembly When installing a drawer, you should use countersunk screws that will not interfere with the opening and closing of the drawer.

Step 5 - making the tabletop itself

Again we cut strips of plywood glued together in several layers for the base of the table top. We connect the strips into a box using dowels and PVA.

If you use round dowels, then you need to take at least 4 of them for each connection.

While the tabletop box is drying, we assemble its working board: we take wide sheets of plywood and glue them together in several layers.

You can also pick up a tabletop from an old desk and then simply adjust it to size. We glue the tabletop onto a box reinforced with dowels.

Step 6 - install the vise

As soon as the glue has set and the tabletop is ready, we drill holes in it for wedges for stops and for attaching a vice.

Typically, the vice is placed on 3 holes: two for fastening with bolts, one for the screw that imparts pressure when the handle rotates.

The vice can be taken from an old workbench or purchased ready-made and then simply adjusted to the tabletop by drilling holes of the required pitch.

A bench vise is a metal screw with guides and a wood clamp.

You can take several layers of plywood about 5-7 cm thick and simply drill holes in it and put it on a screw - you will get a stop, then put snap brackets so that the vice does not fall out and you're done.

You can drill holes in the stop according to the size of the dowel large diameter, then attach it with a screw to a square of plywood, having previously drilled a recess in the square.

Make 4 such stops and place them all over the tabletop to fix the workpieces with the stop in a vice.

Our workbench is ready!

(All the above steps are shown separately in the video of the assembly process)

Rules of care and use

There are a number of rules that must be strictly followed in order for the workbench to last as long as possible:

• Clean the surface from dust and glue after each use;
• Wipe the surface once a month with hot drying oil;
• Do not flood the workbench with water or place anything adhesive on it, including parts to be glued.
• The chopping workbench is not used under any circumstances;
• Place a board or plywood under the workpiece if you want to use a cutting tool.
• Do not over-tighten the vice screws;
• When the screws are tightened, do not hit the vice;
• The workbench is attached to its permanent location using strips with screws or nails;
• The bench board should not move. Otherwise, strengthen all its connection points;
• Wipe wooden screws with dry soap, paraffin or graphite, and metal screws only with machine oil.

Every craftsman needs a comfortable workplace to work with wood or for finishing manipulations. In order to carry out all the work as efficiently as possible, you can quickly build a high-quality and inexpensive workbench with your own hands to suit your needs.

Construction and purpose of a carpentry workbench

A workbench is a stable, massive work table designed for processing various products using manual or power tools. The larger the size of such a table, the heavier and larger the parts can be processed on it.

Typical workbench layout:

Having decided to make a workbench with your own hands, you need to study everything possible designs tables, their drawings, and only then make a choice.

Simple stationary workbench It is not difficult to make, but it will be “tied” to a specific place. It can be used for processing massive wooden blanks and heavy boards.

Mobile desktop has small dimensions (approximately 80x70 cm), weight about 30 kg and only a vice. It is intended for working with small products and for minor repairs.

Composite workbench connected with bolts, so it can be easily disassembled. However, it is quite difficult to do it yourself.

Making a workbench project

Worker carpenter's table should be made in such a size that it is convenient to work on it.

Height The table directly depends on the height of the owner, who should be comfortable standing to perform any operations. For an average height person, the workbench can be from 70-90 cm in height.

Lenght and width The size of the workbench depends on the area of ​​the room in which it will be installed. A table with a width of 80-100 cm and a length of at least two meters is very convenient.

Required fixtures and table configuration should depend on which hand the master will work with and what operations he will perform on the workbench.

Set up a workbench It's best to be near a window, but you'll still need additional lighting. In addition, sockets must be provided near the workplace.

design collapsible table can be reduced due to the small thickness of the material. In such a workbench you can make folding legs or a twist-off tabletop.

DIY workbench. Blueprints. Video instruction

A stationary workbench can be installed not only indoors, but also in the yard own home or dachas.

Making the base

First of all, you should make the frame of their beams with your own hands and fasten it in such a way that the base is as rigid as possible.

Most often, first, according to the drawing , grooves are made, and only then the entire structure is assembled. In this case, all joints are glued and fixed with clamps. If the workbench is collapsible, then all parts of the frame can be connected using metal corners.

To stationary design was even more reliable, several parts of the support frame can be fixed to the wall. You can increase the stability of a carpentry workbench with wedge-shaped inserts or diagonal jumpers. They are fastened with self-tapping screws between top part frames and legs and are made of the same material as the table base.

Making a table top with various accessories

Workbench cover size should be a few centimeters larger than the base of the structure, then it will be convenient to work behind it.

1. The boards are attached to three bars using metal corners, which are placed with reverse side countertops. Grooves must first be made for these bars.
2. Then the boards are carefully adjusted to each other, sanded and coated with a protective solution. It is recommended to use drying oil or oil.

A recess is made at the end of the tabletop for vice. In this case, the vertical plate should form one plane with it. In addition, you will need a plywood pad, which will need to be placed at the bottom of the workbench.

The vice is applied to its location, and the location for the holes is marked. A vice is inserted into the finished recess and fastened with bolts and nuts to the table top so that its lips are located flush with the surface of the table top.

You also need to build stops on the carpentry workbench, which you can purchase or make yourself. It is not recommended to use round dowels or bolts as stops, since dowels do not secure parts well, and the bolt head can damage the workpiece.

It's quite easy to do pegs or rectangular stops. With their help, you can securely fix parts of any size. These stops are made from hard wood. You can simply make them rectangular, widen them at the top, or cut them out with a jigsaw and make them with a “spring.”

You can make holes in the tabletop for pegs or build it up with bars required thickness, screw them to the edge of the table and cover the other side with a bar. In order to fix any part, the sockets should be located from each other at a distance of half the travel of the vice.

The stationary workbench is ready, now you can work on it. However, if there is not enough space to install a desktop, then you can make a collapsible carpentry workbench.

Do-it-yourself collapsible workbench - arrangement

The procedure for making such a table is similar to that described above. Its main difference is that connecting parts requires use of bolted connections.

The advantage of such a workbench is not only that during its operation you can easily replace any parts. For example, every table becomes loose over time, and it is much easier to simply tighten the mounting bolts on it than to strengthen it with new screws and nails.

Of course, building a workbench with your own hands is not an easy task. But, having worked hard, you can end up with an excellent and comfortable workplace with various devices, at which work will bring joy.

Any business man needs his own equipped workplace for storing tools and performing carpentry and plumbing work. In this case, a workbench will become a simply necessary element of the workplace, and now we will tell you how to make a workbench on your own.

In contact with

Classmates

Indeed, to buy it, you will need to shell out a significant amount and, in addition, select right size it seems quite suitable for your premises challenging task. But if you do it yourself, you can choose the required size of the workbench to the nearest centimeter.

What kind of workbenches are there?

A workbench is a work table on which a craftsman performs manual work on processing wooden, metal and other parts. Self-made workbenches are installed in the garage, at the dacha and even in the apartment. The workbench is equipped with various additional devices that may be needed during work, such as stops and a vice. In addition, storage containers are installed in workbenches various instruments and even documentation. Based on the type of work, there are carpentry, carpentry and metal workbenches.

DIY workbench video:

Carpentry workbench

A standard carpentry workbench has this design. The main parts are the bench plate and the bench. The underbench looks like a stand (usually two), which are connected to each other by wooden blocks. The material of this table element is usually pine or other softwood.

The bench board or cover is made of hard wood, such as oak, and has a thickness of up to 8 cm. The surface of the board is covered with drying oil. If you are going to assemble a workbench with your own hands, then you should know what additional devices need to be installed on the tabletop.

Note!

First of all, it should be a vice located in the front part and used to fix parts.

In the back part it is necessary to make a recess for storing small tools. There are holes on the edge of the bench board into which wooden blocks and metal combs are inserted. A standard workbench is mainly suitable for self made, and if you also want to use power tools, then for this you need to choose a workbench board with a large number of holes for stops.

Mechanic's workbench

A mechanic's workbench is a more powerful structure. It has metal carcass, on which a wooden cover up to 6 cm thick and covered with an iron sheet is placed. The lid is edged with a three-sided edge and, in most cases, a bench vice is installed on it. The tabletop on such workbenches is made powerful so that it can withstand high impact loads, including sledgehammers.

The material is chosen at will, but the most popular is MDF with galvanization, which allows you to protect the tabletop from influence aggressive environment such as gasoline, oils or solvents. In addition, such a tabletop is easy to clean from dirt. The bench is equipped with several pull-out drawers for storing tools.

Carpenter's workbench

Another type of such structure is the carpenter's workbench. This workplace is designed for processing boards and has dimensions significantly larger than the two previous options. Its dimensions are up to 6 m long and 1 m wide. A stop for processing the board must be installed on the carpentry workbench. It has a triangle-shaped cutout for securing the board with wedges, and is used when processing its edges.

Making a construction workbench

Let's figure out how to make a carpentry workbench with your own hands. First you need to make a frame from beams, and between the legs, for strength, install a jumper and a drawer (the connecting element that holds the structure together). It is advisable that they be located at a distance of about 45 cm from the floor. Installation of the workbench frame occurs in this order. First you need to prepare the grooves, then we assemble the structure and coat the connection points with glue. The final fastening is carried out using clamps.

Workbench table top

It is worth recalling that the production of any design occurs more quickly and efficiently if you have at least the simplest drawing of a carpentry workbench or part of it at hand. Below we show a drawing of the tabletop, top view.

If the tabletop is made of several boards, then it is necessary to ensure that there are no gaps between them, in order to avoid dust getting in there during subsequent work. The dimensions of the tabletop should be 3-5 cm larger than the workbench itself, for greater ease of cleaning the tool. The tabletop must be sanded and varnished. This will serve as protection against getting splinters into your hands.

Installing a vice and creating stops

After we have installed the tabletop, we need to mount a vice on them. For this, on work surface it is necessary to cut a recess so that the vertical plate can be placed in the same plane as the tabletop. We place the vice in the place where it will stand in the future, preferably not at a corner, and make a mark for drilling. Then fasten it with nuts.

Note!

Stops can be purchased at the store, or you can make them yourself.

Then we advise you to make them rectangular shape with height adjustment. It is advisable to make holes for the stops at a length of 50% of the vice stroke. In this situation, you will be able to fix various workpieces well. Video instructions for making a workbench can be viewed in our article.

Wooden workbench

Making a metal workbench

Let's look at how you can do it metal workbench with your own hands.

1. Let's determine the height of the future table. It can be different for each person, for example, if a man is 180 cm tall, then the height of the workbench is 90 cm. But still, for the final decision you need to focus only on yourself.
2. Don’t forget that the drawings of the mechanic’s workbench drawn by you will be useful for faster and higher-quality assembly.
3. For a metalworking workbench, the frame is best welded from profile pipe and corners, but in extreme cases it can be made in the same way as a carpentry structure, from beams.
4. To make the structure as strong as possible, you need to place spacers between the legs. Sometimes, instead of spacers, a shelf is installed, into which you can later put tools, paint and varnish liquids, or other necessary items.
5. For structural stability, you can attach the legs to the floor. This will prevent the workbench from wobbling while working.
6. Build a countertop from MDF and galvanize it if possible. This will significantly increase its strength.
7. If you want your workbench to be equipped with drawers, then place runners under the upper bars, similar to those installed for drawers in. Then you will have storage space for small parts, screws and nails.

Folding workbench

There is another type of workbenches that are used for both carpentry and plumbing work. This is a folding workbench. It is very convenient when there is no extra space in the room. After working on it, you can always fold it and put it in a corner to wait next job. In addition, when folded, it can be transported to the country house. This workbench consists of two parts: a removable workbench board and a folding table. It is usually made in smaller sizes than a stationary table.

DIY workbench video:

In contact with

See inaccuracies, incomplete or incorrect information? Do you know how to make an article better?

Would you like to suggest photos on the topic for publication?

Please help us make the site better! Leave a message and your contacts in the comments - we will contact you and together we will make the publication better!

Most home craftsmen, who comprise the bulk of subscribers and visitors to our site, have, to one degree or another, already solved the problem of organizing their workplace by arranging comfortable workbenches in their workshops and on the balcony.

But there are also those who are looking closely at home handicrafts and are trying out this universal profession, which includes many specialties and is becoming a very useful hobby for the family.

First of all, this article is for them, but perhaps it will also be useful for those who have already found themselves in the role of a DIYer and, having decided on the main types of work, can competently set about arranging a home workbench for the workshop with their own hands.

Types of workbenches for the workshop

A workbench is a table for carrying out various specialized work on processing different materials. Accordingly, depending on what material you have to work with and what operations to carry out, workbenches differ from each other in size, configuration and material of manufacture. Based on the type of materials processed, workbenches are divided into:

• carpentry;
• metalwork;
• combined.

Based design features, the following types are added to them:

• universal;
• folding.

Folding universal workbenches are produced by different companies with different lists of functions, and distinctive feature, first of all, is their mobility. Therefore, if you have experience home handyman convert into banknotes outside your apartment or the yard of your house, you can either choose a factory-made universal folding workbench, or, after analyzing a number of design features of a particular model, make it yourself.

But for a home workshop, more massive workbenches are suitable and here there are three options:

• carpentry workbench with the ability to perform a number of metalwork operations;
• a metalworking workbench with the ability to perform a number of carpentry operations;
• combined workbench.

Let us immediately note that the last option is not the best solution, since it does not allow full high-quality performance of both carpentry and plumbing types of work, but is only relatively adapted for their production, therefore the first 2 options, in our opinion, are preferable. It is these options that we will consider in examples for self-production.

Making a simple DIY garage workbench

The simplest workbench for a home workshop will be a fairly powerful table with a small set of additional functions: drawers, shelves, etc. for storing tools and remanent.

It’s good if it is possible to slightly transform it to perform work on metal or wood, but more on that below.

To create such a workbench we will take wooden blocks 40x80 and cut out 4 legs: 2 pcs. 700 mm long, 2 pcs. 750 mm long and 2 lower jumpers 500 mm long. For the 2 upper jumpers of the same length, we used a 40x100 block available on the farm.

It will also go for top harness the base of our workbench is from the front, with a length of 1400 mm at the bottom and 1600 mm at the top. And at the back we use edged board 40x150x1600, but we will need all the long pieces later.

If you have a tenoning tool, use it like we did.

If not, make them by hand or you can butt the pieces together using overhead metal fasteners.

Collect side racks as shown in the photo below.

After this, you can begin assembling the entire frame.

The central jumper inside the frame, made from the same 40x80 block, fixed on small wooden brackets 40x40x180, in addition to strengthening the structure, serves as a stop for two bedside tables with drawers from old ones desks, which we decided to use in our workbench.

For the working surface of the workbench, we also used our existing laminated fiberboard surface. We screwed a board to the front edge on metal plates, which will protect its edge from peeling during use. It will also serve as the basis for attaching a small bench vice with a clamp.

We attached the working surface to the frame using metal corners and got a fairly powerful workbench general purpose for our home workshop.

Manufacturing of a carpentry workbench with modifications for performing metalwork work

If you primarily work with wood, then the logical thing to do would be to build a woodworking bench and make some modifications to the design for metalworking operations.

A traditional carpentry workbench for a workshop has a design that has been proven over centuries, which has undergone virtually no significant changes until the present day. Its basis is a massive frame with tenon joints, using wedges for tightening in case of drying out, a powerful (often stacked) tabletop with a recessed tray for collecting chips and tools, and two vice-clamps for fastening workpieces.

The dimensions of such a workbench are selected depending on maximum length workpieces that will be processed on it. If you are planning to make your own wooden doors, then the length of the workbench must be at least 2.5 m and the width at least 0.8 m, otherwise your work on it will turn into hard labor. The workbench of my grandfather - the best carpenter in the area for at least 50 km in all directions - was 3000x1000 and he said that to make large frames for verandas he was missing 20 centimeters in width.

The dimensions of the school carpentry workbench are 1200 x 500 x 750. If the plan dimensions suit you and you are willing to spend about 13 thousand rubles on it, then the height can be adjusted by screwing bars of appropriate sizes to the legs. But you can also consider alternative options.

As a matter of fact, these are variations on the theme of the same carpentry workbench for a workshop with various materials for the countertop, the presence or absence of drawers, shelves and by different mechanisms vice. Now in order:

1. We make the bed from dry pine lumber 40-50 x 80-100 mm, calculating the height to suit your height. If your workbench will be installed in a room where there are no sudden changes in humidity, then its elements can be connected in any convenient way, albeit end-to-end using fixing metal plates and corners.

2. The tabletop can be made from ready-made glued wooden shields, sold in most construction supermarkets, or glue them together from planed bars with a thickness of at least 50 mm yourself using PVA glue, constructing a simple clamping device. It is important to remember that the top side of the future workbench should be as flat as possible. You can also use thick-layer plywood for the tabletop, but it is still advisable to paste over its ends wooden slats made of oak, beech or ash.

3. For fastening clamping mechanisms The bottom of the workbench table top is built up with bars of appropriate sizes. The most popular are these clamping fixtures:

— carpentry lead screw with two guides made in Czech Republic Tr 24*5, 390/205 at a price of about 3 thousand rubles.

Spanish Piher carpentry vice, 150 mm, costing approx. 2 thousand rubles;

You can also make something similar yourself, using a pin with a diameter of 14 - 16 mm, which, of course, will not transfer the same forces as a vice, but will make your clamp extremely economical and repairable, due to its low cost;

Or make an even simpler one clamping device from the same pins, but due to the lack of guides, place 2 of these clamps on one vice.

4. Make holes for stop pegs in two directions opposite the vice lead screw. It is also useful to make them across the entire surface of the tabletop parallel to each other for secure fastening of large products.

5. Attach the workbench tabletop to the base using strong metal corners and, if you do not plan to move it, use them to secure it to the floor.

And you have successfully completed the first task of the workbench version described in this section of the article.

Now, several options for devices for performing metalwork work on such a workbench.

1. The simplest of them is to make a plate of steel 3 - 5 mm thick with a frame of steel angle, kept separately from the workbench or attached to it on hinges and lowered onto the tabletop if necessary.
2. The main attribute of a metalworking workbench is a metalworking vice. In this case, we recommend using a vice with fasteners that do not require going through the workbench top.

You can, of course, adjust the holes for the stops to fit the vice fasteners, but with a thick pad you can do without it. Also interesting is the option of attaching a bench vice directly to the table top of a carpenter's workbench using an adapter bar-stand and a powerful clamp.

And the overlay should not cover the entire area of ​​the workbench. There are a lot of options, the choice is yours.

Modification of a metalwork bench for carpentry work

Often, especially if the household has a car and a garage, the main workbench is a metalworker’s.

We will not consider the process of its manufacture in this article, but about simple ways We’ll tell you how to adapt it for carpentry work, especially since it’s not at all difficult. To fully use your bench as a carpenter's bench, you will need to dismantle the bench vice and make several simple devices.

Let's take a closer look at them.

1. From the first picture below, when modifying a bench, we will be interested primarily in the side stop (1), which is not difficult to make removable. And together with the holes for the dowels (14) along the front end of the workbench (and this can be a solid removable structure) and a suitable wedge, we get a simple and reliable device attaching the board to the workbench. You can simply make a wooden plate secured with recessed clamps, with the entire set of workpiece fastenings shown, and understand that the level of the working surface will rise by its thickness, which can be compensated for by the corresponding height with a ladder at the workbench.

There is nothing to say about the back stop; it simply performs a supporting function for long workpieces.

2. You can make an overhead planing board with a universal stop, shown in the second picture. By increasing the height of the stop (or changing it depending on the height of the bar being processed) and screwing the bar from the bottom to the right edge of the workbench, we get the simplest device that turns a metalworker's workbench into a carpenter's workbench.

3. A slightly more complex overlay with a fairly powerful option for securing the workpiece also allows you to solve this problem. The only thing we would recommend in this case is to also screw it with right side select a stop and thickness of at least 50-70 mm for more reliable fastening of the front pegs and sufficient depth of the lock and clamp.

The method of installing the last two planing devices on the workbench is shown in the diagram:

Dear readers, if you have any questions, please ask them using the form below. We will be glad to communicate with you;)