Connecting a dishwasher consists of only 4 stages: choosing the installation location, connecting the drain, cold water and electricity. Installation of each of the communications is not difficult and even a novice electrician can do it. Next, we will look at simple step-by-step instructions and a visual video example on how to connect a dishwasher to the water supply, sewerage and electrical networks.

Step 1 – Prepare tools and materials

The first thing you need to do after purchasing equipment is to prepare a set of all necessary tools to connect dishwasher to communications. In addition, it is necessary to determine which Consumables will be required for installation work to buy them in advance. For standard conditions, that is, when metal-plastic pipes with a diameter of ¾ inches are installed around the house, as well as electrical network with grounding, the set of materials will be as follows:

• drain siphon with two fittings (suddenly you want to install a dishwasher in the room along with a washing machine);
• ¾" diameter tee;
• ¾" stopcock;
• deep cleaning filter (will significantly extend the life of the dishwasher);
• FUM tape;
• grounded socket;
• a wire of a suitable cross-section and length (in the event that there is no outlet nearby and you will have to draw a new line from distribution box in the room).

Also, to connect the dishwasher yourself, you may need longer hoses for water and drainage. Very often, short hoses are included with the unit, which may not be sufficient to reach the connection point. Here you yourself must initially measure the required length of communications from the installation site to the connection points and compare it with the length of the materials included in the kit.

As for the tools, you will need the following list:

• electric drill;
• straight and curved screwdriver;
• sharp knife;
• shears for metal-plastic pipes;
• short building level;
• two adjustable wrenches;
• indicator screwdriver (determine phase if missing).

Having prepared the entire set of tools, you can proceed to choosing a suitable location for installing and connecting the dishwasher in a private home.

Step 2 - Choose a suitable location

Most likely, you have already fully thought through this stage before you go and buy the product. If you have not yet decided on a placement location, we recommend taking into account the following nuances:

1. The built-in option must correspond to the dimensions kitchen furniture. There is a special section for the dishwasher kitchen set, allowing you to install a dishwasher under the countertop, hob or even a sink. You can also place the case in a closet if this is convenient for you.
2. The distance to the sewerage system should not exceed 1.5 meters, otherwise the equipment pump may fail prematurely. If the dishwasher is located far from the sink and can only be installed at the edge of the kitchen, or for some reason the sewage system does not go into the kitchen, consider placing the equipment in the bathroom.
3. Choose a location so that there is already an outlet nearby. In this case, connecting the dishwasher to the power supply will be much easier.
4. If the model is a tabletop type (as shown in the picture), you don’t have to think through the drainage system. You just need to fix the hose in the sink (you can’t do without it in the kitchen). By the way, in this case you can do without a siphon, and the pump at the drain will be completely unloaded (the water will flow out by gravity), which will significantly extend its service life. Installing a dishwasher on a countertop is much easier and is suitable for a small kitchen or if the kitchen furniture is old (not suitable by modern standards).

Having determined a suitable location, you can begin connecting the dishwasher to the sewerage system, water supply and electrical network. Let's look at each of the stages in more detail.

Step 3 – Connect the water

This stage is one of the most labor-intensive and takes the most time. First, you need to turn off the water in the system, because... You will “cut” the tee into the metal-plastic pipe.

You can connect the dishwasher to the water supply as follows:

1. We find the place where the flexible mixer hose is connected to metal-plastic pipe and disconnect it.
2. We install the tee, having previously wound it on threaded connections FUM tape.
3. We screw the flexible mixer hose onto the tee from above
4. We connect a fine filter to the outlet, and after it there is a shut-off valve (do not forget to wind the sponge onto the thread).
5. We connect to the tap with a hose from the equipment itself.

Please note that for water supply it is necessary to use only cold water. Connecting the dishwasher to hot water is prohibited, because its quality is several times worse and at the same time it is susceptible to heating warm water more electricity is wasted than in the case of cold!

If you don’t have running water at your dacha, you can still install a dishwasher. In this case, you will need to place a tank in the attic with clean water. For the operation of some models of equipment, a pressure of 0.1 MPa (indicated in the passport) is sufficient, which is created when water is supplied from a height of 2-3 meters. As you can see, you can connect the dishwasher yourself even without running water, if you wish. This option is often used in villages where the supply of cold water is unstable.

Step 4 – Drain

Everything is much simpler here. The best option There will be a siphon installed under the sink, because... in this case unpleasant odors from the sewer will not spread throughout the kitchen.

All you need to do is connect the drain circuit to the siphon, making sure that the hose is at an angle. The greater the slope, the more efficiently the water will drain (by gravity). We draw your attention to the very important nuance– at the top, where the drain connects to the siphon, it is necessary to create a bend that will prevent water from getting from the sink into the dishwasher drain (you can see this bend in the photo below).

Step 5 – Supplying electricity

As we have already said, power must be supplied from an outlet located next to the equipment. The socket for connecting the dishwasher to the network must be rated at least 16A and at the same time have a grounding contact.

Since the power of the dishwasher is quite high, the wiring must withstand the passing loads. To do this, you need to take care of the appropriate cross-section of the electrical wiring. It is best to implement, on the basis of which to select the most suitable option. It is believed that for safe work For this type of equipment, it is necessary to use a diameter of copper conductors of at least 2 mm. Electricity must be supplied from the distribution box or the switchboard itself. Be sure to protect the 16A line. Connecting a dishwasher without grounding is not allowed for electrical safety reasons. If it is already plugged into an outlet washing machine, there is no need to additionally load it with a dishwasher, because... In this case, when two devices are operating, a current overload of the outlet may occur.

Step 6 – Finishing Work

When you manage to connect all communications, all that remains is to level the equipment and implement control check installation work. As for the level, everything is quite simple - you need to adjust the legs to align the body construction level. Any distortion will negatively affect the efficiency of use and durability of the dishwasher.

After installing and connecting the dishwasher, all that remains is to check the quality of its operation. To do this, you need to run a test mode in which the washing occurs without dishes (idle mode). You must monitor how quickly water is added and drained. Also be sure to check all butt connections to ensure there are no leaks.

If everything is correct, then you were able to correctly install and connect the dishwasher on your own, for which we congratulate you! We recommend viewing it immediately visual video instructions showing the installation technology of the built-in model:

Video review of installation work

There are several for your attention useful tips, which will not only allow you to connect the dishwasher correctly, but will also extend the service life of the equipment:

• Installing a drain hose into a sink is extremely unsafe, although it makes the connection process much easier. The danger is that the waste water drain may fall out of the sink and flood the neighbors below.
• Electrolux equipment is very demanding in terms of installation rules. The maximum tilt to one side should not exceed 2 degrees, so be sure to check this point with a building level.
• If you decide to buy any model from Siemens, be sure to look at the dimensions of the case and check it with the manufacturing standards of the furniture into which it will be installed. Very often, Siemens neglects technical standards and creates non-standard dimensions, as a result of which difficulties arise when installing a dishwasher in a finished kitchen.
• Do not under any circumstances connect the grounding contact to gas or water pipes. Grounding must be connected to the grounding bus apartment panel. We talked about this in a separate article.
• The air gap between the wall and the back wall of the equipment should be at least 5 cm, which is quite enough for air circulation.
• The kit must contain connection rules and visual diagram To a certain model. You only need to rely on it, because... All conditions are purely individual, although they have much in common.
• It is not recommended to use surge protectors (extension cords), because they very often cause accidents and fires. If there is no other way to supply power, it is recommended to do it yourself. This method of connecting a dishwasher via an extension cord can be used as an exception.
• If you decide to place a free-standing dishwasher next to a stove, refrigerator or oven, connect a separate line from the distribution box to each appliance so as not to overload the outlet installed near all devices.

Dishwasher operating tips

That's all the instructions on how to connect a dishwasher to the water supply, electrical network and sewerage system with your own hands. We hope that the information was useful and interesting for you. We also recommend that you familiarize yourself with so that in the future you will be familiar with how to repair equipment at home!

Connection and installation of a dishwasher from manufacturers such as Bosch (Bosch), Siemens (Siemens), Electrolux (Electrolux), Ariston (Ariston), Ikea, Indesit, Veko, Zanussi, etc. can be done independently, even if you are not a master plumber. Of course, this work requires certain skills, so if you are not confident in its successful completion, it is better to turn to specialists.

Installation steps

Installation and connection process engineering communications can be divided into several stages:

1. Choosing an installation location where the installation of built-in and fully built-in appliances will be carried out, in fact, this issue should be thought through before purchasing a dishwasher for the kitchen.

As a rule, all built-in kitchen equipment (for example, Hotpoint Ariston LST) is produced standard sizes, so there shouldn’t be any issues with installation in the headset.

As an example, here is a table of dimensions for Bosh models:

As you can see from the table, the SMS dishwasher model cannot be installed in the space planned for the SKS, which is 45 cm high.

It should be noted that some Siemens models, for some reason, may differ in size from the standard, therefore, before making a purchase, we recommend that you first measure the device so that you do not have to redo the headset later.

Please note that installation rules prohibit placing dishwashers near electric stoves, as well as under the stove or above the oven.

After installing the machine in place, you need to check that its doors close properly.

1. At the second stage, it is necessary to organize drainage into the sewer.
2. Connection to water supply.
3. Power supply.
4. Level adjustment and installation check. We would like to point out that almost all the lineup Electrolux (for example, ESL 94201 LO), Bosh (SGS, SPV, SRV) and Hansa are very critical about tilt angles. For normal operation of such devices, the deviation from the vertical (in any direction) should not be more than 2°, so in such cases you cannot do without a level.

If with the first and the last stage There are no difficulties, but in the rest there are certain nuances that require detailed consideration. As a rule, the installation instructions (attached to each dishwasher) contain all the necessary information. We recommend that you read it, after which you can begin preparing your tools.

Necessary tools, materials and consumables

To install a dishwashing machine yourself, you don’t need specialized tool, all you need is:

• an adjustable wrench, if you don’t have one, as a last resort you can use pliers;
• Screwdriver Set;
• insulating tape, it will be wrapped around metal threaded parts before tightening them with pliers. Accordingly, if you have an adjustable wrench, electrical tape will not be needed.

Materials you will need:

a siphon equipped with a fitting, for example, such as shown in the figure. If you also plan to connect a washing machine, then select a siphon model with two fittings;

To connect the water, you will need to cut into the pipe; for this purpose you will need a tee. If you don’t want problems, we don’t recommend purchasing silumin reinforcement; it can fall apart for no apparent reason. It is best to opt for brass, metal-plastic or bronze products;

ball-type valve, the requirements for the materials from which it is made are the same as for the tee;

In addition, you will need to buy a special waterproofing tape (FUM). You should not use insulating tape instead: firstly, it is thick and it will be problematic to tighten the thread, and secondly, the insulating tape will soon dry out, resulting in a leak.

Water drainage

Once everything is prepared, you can begin connecting the machine to the sewer system. To do this, you need to install a siphon equipped with a fitting and connect a drain hose to the latter. This, at first glance, simple procedure for organizing a drain requires compliance with two important conditions.

The first condition is that you need to make an upper bend, as shown in the image below, this will prevent water from entering the sink bowl into the PMM.

The second condition is that the elbow of the water seal on the drain should be as deep as possible with a short bend. This is done so that the air from sewer system did not enter the device. If you do not install a water seal, the dishes may have an unpleasant characteristic odor after washing. The correct water seal is shown below.

We do not recommend implementing the method of organizing a drain from a stationary PMM directly into a sink, since the load on the pump increases significantly. We will not even consider options for connecting directly to the sewer, since this is absolutely wrong.

Connecting the water supply

The first thing we want to immediately emphasize is that, regardless of the type of PMM, it is highly not recommended to connect it to the hot water of a domestic water supply. This is due to the fact that to "purity" hot water Fewer requirements are applied than for cold ones, which will negatively affect the operation of the PMM.

In most cases, the cause of failure is check valve dishwashing machines are directly related to poor quality water. The result will appear instantly - cleanly washed dishes will have a rather unpleasant odor. To eliminate such a breakdown, repairs will be required, for example, in Astana or Balashikha.

Note that many models of imported PMMs (Bosh, AEG, Ajnev, Beko, Candy) are very critical to the composition of water, as well as its hardness, so it is recommended to install filters even for cold water. This will significantly extend the life of the equipment.

Now let's move directly to the connection. It is carried out according to the following algorithm of actions:

• the whole process begins with shutting off the water entering the apartment. There is no need to turn off the entire riser in the house; as a rule, taps are installed on the supply to the apartment, and they need to be closed;
• After the water is turned off, it is necessary to disconnect the henka (hose) from the mixer installed on the sink. We no longer need the old waterproofing from the hose, so we need to remove it;
• screw the tee onto the pipe and connect it to the mixer. A ball-type valve is screwed into the middle outlet of the tee, and a hose from the PMM is screwed onto its outlet. When making all connections, each threaded joint must be wrapped with FUM waterproofing tape, and if required, a rubber gasket must be installed.

If you want to watch the whole process in more detail, then its video can always be found by visiting thematic sites.

If the hose included in the kit is short, you can extend it or purchase a new one of the required length. The latter is preferable.

Connection to electrical wiring

This stage is the simplest, if you have everything prepared to turn it on, then just insert the plug into the outlet. No special connection diagram is required when installing a dishwashing machine. But certain conditions must be met.

The electrical wiring must be designed for the power of the PMM; it is advisable to power the machine via a separate line, which is connected to the RCD in the electrical panel. Sockets for connecting PMM must be waterproof (IP44) with grounding. Please note that according to the operating rules for such devices, use them without connecting them to protective grounding, is prohibited.

It is already difficult to surprise anyone with modern technology and new developments. In almost every home you can see a variety of various devices and gadgets that make cleaning, cooking and human life easier in general. Automatic dishwashers have long been among the most popular, but manufacturers are adding new options to the main ones, which are not always easy to understand. Studying the owner's manual can often take quite a long time, but once you know how to use your dishwasher, you can learn many useful features and reduce your cleaning time.

Like any device in the kitchen, a dishwasher has a number of basic rules of use that are important for proper operation and high-quality cleaning of dishes:

1. Before loading dishes into the basket of the device, it is necessary to remove all food residues, otherwise no dishwasher cleaner will help in its operation.
2. Any containers and vessels must be immersed upside down.
3. The instructions say not to overload the dishwasher as this may interfere with the movement of the blades.
4. It is recommended to place the most dirty dishes in the lower baskets, and the least dirty ones - in the upper ones.
5. Stabbing and cutting devices are installed with the handle facing up.
6. Plates should only be placed vertically and the question of how to use the dishwasher will disappear by itself.
7. Fragile dishes (in particular, crystal) must be cleaned in delicate washing modes.
8. To prevent thin glass dishes from becoming dull, you can use by special means, preventing the appearance of plaque.

What can't you do?

After purchasing equipment, many people wonder how to properly use a dishwasher, but even after reading the instructions, they often make mistakes. The most common mistakes in operating machines such as Bosch, Veko and others:

• Cleaning painted porcelain;
• Washing plastic dishes;
• Cleaning fragile dishes in the absence of a delicate washing function in the machine;
• Washing cutlery with wooden handles.

How to properly wash such dishes, the cleaning of which is not provided for by the installation? You can carry out the procedure in the classic way, while thoroughly rinsing off the dishwashing detergent.

Important :

Adding detergent

As is known, in installations of this type usually use special Finish type detergents. For example, this is stated in the instructions on how to use a Bosh dishwasher. However, the chemical must also be placed correctly after loading into the apparatus. dirty dishes.

The first thing you need to do is find a special compartment for placing the powder (or capsule). When using powders, you should use a special measuring cup (usually included with the machine). The location of the compartment is indicated by the manufacturer in the instruction manual, and more detailed instructions on how to use dishwashing detergent can be found on the product packaging. It must be added before each dishwashing.

Video: Dishwasher detergents:

Important:

It is not recommended to add detergents to the dishwasher compartment; this will significantly worsen the quality of cleaning. Dishwasher tablets are also refilled through a special compartment.

For washing dishes in automatic car A rinse aid is also used, which is filled into a cell specially manufactured by manufacturers for this purpose. Most often, a dispenser and a residue indicator are installed in it.

In addition to all dish cleaning products, regenerating salt is added to the machine (to soften water hardness), taking into account that one kilogram should be enough for a long time. The compartment for it is usually located at the bottom of the main chamber. For example, with installations such as Electrolux. This drug will significantly extend the life of the equipment.

Dishwashing modes

Choosing the right dishwashing mode plays a big role, since to a large extent the result of the procedure depends on it. In the most sophisticated models there may be many such modes, but the basic ones are the same everywhere.

Quick wash mode

The quick dishwashing mode is suitable if the dishes are not too dirty. For example, if it was used for drinks or cut fruits. It is not suitable for dirtier containers and devices.

Pre-soak mode

How to use the dishwasher if the dishes are covered with greasy deposits or are very dirty? First of all, before loading, you need to remove all food debris from it, and after loading, select the “soaking” mode, which is found on all Hansa-type units, and then the standard washing function. An option like “Very Dirty” is also suitable for these purposes.

To save energy, you can soak the dishes manually before loading. However, allowing chemicals to enter hand wash It is highly not recommended to put it into the working basket of the unit.

Delicate wash

Delicate wash mode is suitable for dishes festive table. It can be used to clean glass and crystal glasses and table vases, expensive porcelain and other fragile items.

Pre-wash option

There are often situations when sufficient quantity There are no containers and cutlery for the procedure, and in this case, in order to avoid drying out the existing dishes, you can select the pre-cleaning mode.

End of the procedure

After the dishwasher has finished cleaning, do not unload it immediately. The instructions for Siemens type installations indicate that after completing the cycle it is recommended to wait a few minutes to allow the devices and containers inside to cool down. The baskets must be loaded from the bottom up to prevent the possibility of residual water from getting into the emptied sections onto the rest of the dishes, especially for Kandy machines and many others.

If it is necessary to move or repair equipment, it is important to drain the water from it. To do this, you need to disconnect the drain hose from the siphon (it is recommended to use rubber gloves) and direct it into a container for dirty water. The same procedure can be done if the hose is clogged for subsequent cleaning.

Dishwasher Care

Any modern dishwasher must be kept completely clean at all times and dirty dishes must not be kept in it for more than a day. Compliance with this simple rule can significantly increase the life of the equipment. For this purpose, it is recommended to carry out some important rules uses:

• All filters must be cleaned after each procedure;
• The use of conventional detergents for manual cleaning is prohibited;
• Excessive overloading of the device is not allowed;
• Do not open the loading door while the machine is operating;
• Do not allow chemical solvents or any other chemicals to enter through the compartments or main door;
• It is important to operate the unit only with the addition of regenerating salt to the appropriate compartment;
• External surfaces must be kept clean;
• It is not recommended to repair the dishwasher yourself;
• Grounding the machine is mandatory;
• In case of malfunctions, you should stop working and contact the service center.

Video: caring for your dishwasher:

Common Causes of Ineffective Dishes Cleaning

There are times when kitchen utensils and containers are not washed well enough. There may be several reasons. Most often this is due to the fact that the dishes were loaded with dried food residues or placed too close to each other. In this case, there is poor water flow and difficult movement of the blades, which can even lead to breakdown.

The problem may also lie in a low-quality detergent or incorrect choice of cleaning mode. Depending on the degree of fragility of the dishes inside the unit, you can switch the mode to a tougher one.

If the baskets and sections of the machine are poorly cleaned after use, this can also cause poor cleaning. In this case, you should empty the baskets and give them a thorough cleaning using regular dishwashing detergents.

Helps improve the quality of dish cleaning right choice detergents on which it is not advisable to skimp. It is important that they not only clean effectively, but also be completely washed off with water to prevent food poisoning. You should also take the choice of rinse aids and regenerating salt seriously.

What to do if the machine stops working?

Any equipment used at home is prone to some breakdowns and dishwashers are no exception. However, a sudden stop in work may not always be associated with a breakdown. Among the main reasons:

• turning off tap water;
• the door is not fully locked;
• The dishes are not installed correctly;
• accidental disconnection of the unit from the outlet or power outage;
• clogged drain hose;
• wrong mode selection.

Safe use

Safe use of equipment will not only help avoid possible injuries during procedures, but will also extend its service life. It is worth noting that the safety rules for each model may be different, since much depends on the design of the unit. The main recommendations are as follows:

• It is important to always use rubber gloves when carrying out procedures;
• Do not touch heating elements and wires with your hands;
• Do not open the machine until it has completely cooled down;
• lack of grounding can not only damage the unit, but also cause injury;
• Under no circumstances should you use faulty equipment. On the one hand, this is fraught with poisoning detergents, on the other - dangers, including short circuits;
• You should not allow any other items other than kitchen utensils and containers into the washing procedures;
• Do not open the door or turn off the power from the outlet until the machine stops working completely.

Conclusion

A dishwasher is an expensive piece of equipment home use, requiring careful treatment. In order for it to work correctly and last as long as possible, it is necessary to follow not only the operating instructions, but also follow the recommendations for caring for the equipment. In addition, it is important correct selection chemicals for carrying out procedures and observing safety precautions.

Video: how to use correctly?

Modern built-in kitchen appliances are designed for do-it-yourself installation, so washing machines, dishwashers, refrigerators and ovens are completed detailed instructions, diagrams, templates, sets of fasteners.

But first you need to prepare the place, pay attention to the issue of supplying communications, and think through every single nuance of connection.

To make it easier for you to understand the rules for installing a dishwasher, in this article we have provided step-by-step instructions, where each stage of work is discussed in detail. With this guide, installing a built-in dishwasher will be quick and easy.

There are two options for installing a dishwasher: yourself and with the help of specialists. In the first case, you risk connecting the car incorrectly; in the second, you will have to part with part of the family budget.

Sometimes the skills of one craftsman are not enough; you have to call a team of specialists: a furniture assembler, a plumber and an electrician.

Installation services for built-in equipment are offered by companies that sell them. For a certain fee, a universal master comes at the appointed time, carries out all the connection work and checks the serviceability of the machine.

However, if you carefully study the installation instructions, think about connecting hoses, find or install an additional outlet, you can save money and acquire new skills by doing everything yourself.

Choosing a location based on size

An important step is choosing a location for installation. Suitable for built-in model furniture modules first level, that is, cabinets standing on the floor.

Purchasing a dishwasher is a definite step towards modernization household. Gradually, technology ceases to be a luxury item and becomes an everyday assistant. It is all the more honorable not to trust the work of installing the dishwasher to other people, but to do it yourself, with your own hands. The instructions that come with each product will provide good information in this regard.

Features of built-in dishwashers

Among all the models of machines, built-in appliances stand out separately, which should be located inside the kitchen furniture, and, according to the designers, can subsequently have an external design under general style kitchen furniture, does not stand out in any way and is practically invisible. The well-known company Bosch supplies the market big choice of these products to suit the needs of each consumer.

Built-in dishwashers are available in several sizes:

• Full size machine with height 80 cm, width 60 cm and 45 cm.
• The compact machine has a height and width of 45 cm.

For comfortable placement of the equipment, its overall dimensions are slightly smaller than stated, and the boxes for installation are made with a reserve. According to the rules, back wall must be surrounded by a ventilation space of at least 5 cm.

In the future, it is planned to install a decorative panel on the door of a built-in dishwasher. To ensure high-quality installation work, many manufacturers, including Bosch and Siemens, supply a marking template. This template helps to correctly position the holes on the decorative door, especially when doing it yourself.

The horizontal arrangement of the equipment is ensured by adjustable legs, which are equipped with almost all machines, of course, such high-quality ones as Bosch and Siemens.

Connecting the dishwasher to the main communications

Installing a built-in dishwasher with your own hands requires compliance with special safety rules set out in the instructions. The built-in unit is highly powerful.

Electrical connection

To supply electricity, it is necessary to additionally install a European-style socket with grounding at a distance of 25-35 cm from the floor. The power supply to the socket is carried out through a 16 A automatic machine. When installing built-in dishwashers with your own hands, in no case should you extend the electrical cord or change the socket to a regular one. This is not only dangerous, but will also deprive the buyer of the right to warranty service.

Connection to water supply

A hose is supplied with the built-in machine, which is connected to the water supply system through a tee. It is possible to connect to the water supply system directly from the sink tap. But all this looks somehow outdated and while washing dishes water tap will be unavailable. Therefore, this option is not provided for in the instructions.

When supplying high-hardness water to the water supply network, a filter should be installed in front of the built-in equipment. He will protect a heating element from salt deposits and will extend its service life. It is useful, especially when doing the work yourself, to watch in more detail how to install a built-in dishwasher using a video.

Connection to sewerage

For a quality connection, you must independently replace the regular siphon under the sink with one that has an additional outlet. The drain hose included in the equipment kit is attached to it. Drain hose should not be twisted, have creases, or pass near hot surfaces.

When performing work independently, you must devote Special attention so that debris from the sink does not enter the machine system, and prevent the appearance of odors by creating a water barrier. All this is described in detail in the instructions supplied with the product.

Dishwasher Installation

Before you start independent work, pay attention to some subtleties of the process.

Helpful Tips:

• For steam protection inner side It is recommended to cover furniture with a protective coating.
• Installation of a 45 cm built-in dishwasher is carried out in inner surface closet It is necessary to take measures to ensure that the furniture stands strictly horizontally, firmly and does not wobble.
• It is advisable not to place several devices side by side, but to separate them at a distance of 45 cm.
• The height of the built-in dishwasher is made taking into account the fact that the countertop will subsequently be installed.

To cover the equipment, it is mounted on the front panel decorative panel. The dishwasher kit includes a template that can be used to create holes for the door cover.

Installing a built-in Bosch dishwasher using video will help you see the entire installation process in detail. Bosch dishwasher is the most popular modern technology, has many functions. Therefore, the video installation of a built-in Bosch dishwasher allows you to view the installation process in detail.

Built-in dishwashers on the market can solve all problems homework with just a few finger movements. To ensure long term uninterrupted operation equipment, it is necessary to install it correctly and efficiently and connect it to the main communications.