DIY installation of blinds on plastic windows. Installation of vertical blinds. Prices for brackets for blinds

The hallmarks of modern housing are big windows. Sometimes a lot of light gets in the way and doesn’t allow you to relax. Every owner is thinking about installing blinds on plastic windows of your home.

Of course, blinds play a big role for comfortable living. Depending on the intensity of sunlight in rooms facing south and east, they can be either completely closed or only partially covered. And the purpose of the room itself also plays a significant role. For example, it is better to choose transparent structures for the dining room, but for the bedroom you need ones that can completely prevent the penetration of sunlight into the room.

Blinds play a big role for comfortable living

But in addition to the above function, these structures also protect against noise that can come from the street.

In addition, blinds are magnificent decor windows Even stripes look stylish and strict and do not require much maintenance.

Of course, it is best to install them yourself. But every owner is faced with the problem of choosing: which blinds are suitable for his room, what to choose - vertical or horizontal. After all, it is from correctness decision taken home comfort and coziness depends.

IN modern apartment blinds are common

In a modern apartment, blinds are a common thing. These original curtain substitutes have long been part of our lives. They give the space a certain aesthetics, elegance, and beauty. Their skillful use allows you to emphasize advantages and hide disadvantages.

The modern market offers many types of blinds. They differ from each other in size, shape, direction of the strips themselves, material of manufacture and even color.

In general there are three main types:

horizontal;
vertical;
roll

Horizontal. This type is most suitable for residential premises. Such blinds can be attached both inside the window, on each of its sashes, and outside, covering the entire window. Such blinds combine perfectly with curtains and practically do not occupy the window sill space.

Roller blinds perform the same functions as simple horizontal blinds, but the fabric base itself makes them lighter and more elegant

Vertical. The difference between this type of blinds is that they can be attached not only to the window itself along its outer part, but even to the ceiling. They create an adequate replacement for tulle curtains. However, this type creates an “office” look, and therefore is not used so often for residential premises. However, for rooms with low ceilings These blinds will fit perfectly. They will help to visually increase the size of the room, this is due to the fact that the structure completely covers the window.

These blinds are perfect for rooms with low ceilings.

Rolled. Thanks to the diversity color range These blinds are perfect for any design solution. They perform the same functions as simple horizontal blinds, but the fabric base itself makes them lighter and more elegant. They are simply attached - to duct tape, using self-tapping screws that are screwed to glazing beads or brackets.

Taking measurements yourself

Taking measurements so that the installation of blinds on a plastic window is successful is not particularly difficult, but it has some features that should not be missed.

If the choice is vertical blinds, That Special attention It is worth paying attention to the width of the product. Unfortunately, adding an extra plate will be much more difficult than, say, shortening it. As a result, after adding at least one plate, you will have to redo the entire product.

If you decide to hang horizontal curtains, then there are several options for both fastenings and measurements.

To attach blinds inside a window, you need to know the width and height of the product. Of course, the height can be subsequently adjusted using the built-in mechanism, but it is better to calculate it as accurately as possible so that the excess does not “little” on the window sash as an unnecessary burden. Width is a measurement that requires special attention, because depending on the accuracy of its removal, the window will be completely closed or sunlight and unnecessary noise will break through the left cracks.

If the window opens, then measurements must be made in the following way. Take accurate measurements of the height and width of the glass itself, and then add 2 cm on top and 0.5 cm on the sides. It is necessary to take into account the availability window fittings, which should not interfere with the operation of the blinds.

Using the same principle, measurements are taken for roller blinds.

But is it necessary to put in so much effort and time? Buy brackets, adhesive tape, glazing beads and much more? It is much easier to come to the company with your own sizes and choose the product you are interested in.

Methods of attaching blinds to plastic windows

The first thing to do when a question arises about how to install blinds on a plastic window is to take the dimensions, it is better to double-check them several times and only then go to the company. By the way, it is better to contact the company where the plastic windows themselves were manufactured.

To order the production of blinds, which will be mounted in such a way that they will be above the general panel of window openings, the dimensions of the window are required. But also in this case, the design can have exactly the dimensions that the customer desires. True, one should also take into account the fact that in the future they should fit harmoniously into the interior.

Most often, installation instructions are included with the blinds. Before starting work, you should study it thoroughly and you can begin installing the product.

To do this, you need to arm yourself with the following tools:

pencil;
ruler;

Measuring tool for attaching blinds to plastic windows

screwdriver;
brackets;

Screwdriver for attaching blinds to plastic windows

drill and drill bit 6 mm;
hammer, scissors, dowels and screwdriver.

There are several ways to install blinds:

install using screws;

Hammer for attaching blinds to plastic windows

hang on pre-nailed brackets;
attach to the holes drilled in the wall.

Important! But we must remember that after screwing the product with screws to the plastic window itself, holes will remain in it, which, if the structure is removed, will spoil appearance window opening.

Installation of horizontal blinds on plastic windows

Every owner thinks about how to install horizontal blinds on plastic windows.

This process requires a certain precision and attention. It consists of several stages:

Stepping back 6 cm on both sides, you need to mark the place where the blinds will be attached. At this stage, it is necessary to pay special attention to the accuracy and evenness of the future attachment points. If they are distorted, the blinds will not be able to work fully and will soon fail.
Using a screwdriver, mark the holes into which the brackets will later be attached. If the window needs to be opened, then holes should be made in the upper part of each sash, and if the window is solid, then the hole should be made on outside glazing bead
After inserting the blinds into the brackets, snap them into place.

If the process of installing blinds raises questions or any difficulties, watch the video instructions for installing blinds on plastic windows

Depending on the size of the blinds and convenience, make a hole at the bottom or side of the window sash into which the lock will be attached.
Check how the blinds work.
If the process of installing blinds raises questions or any difficulties, watch the video instructions for installing blinds on plastic windows.

Installing vertical blinds, although a little easier, still requires at least painstaking work. It consists of the following steps:

At a distance of at least 10 cm from the edge of the cornice, it is necessary to make markings for the brackets using a pencil.
Drill holes and insert dowels into them to secure the brackets.
Install the mounting brackets along with decorative slats on the cornice.

Having assembled the runners, secure them into the fabric.
Attach weights to the bottom of the decorative slats.
Connect the weights to each other by sequentially threading a decorative chain through their ears.
Inserting the end corners and side panels into the ends decorative panel, install it in the mounting brackets.
Check the operation of the blinds.
If for some reason they do not work or do not work correctly, it is better to watch a video on how to install blinds on plastic windows or seek help from a specialist.

But installing roller blinds is the fastest and least expensive. All you need is:

double sided tape;

duct tape;
liquid Nails.

Thanks to this method of fastening, they can be removed, washed, hung and moved to a new place.

On a note! For greater strength, the frame must be washed thoroughly and all dirty spots, which will interfere with the strong adhesion of the tape to the plastic.

Some companies, when selling blinds, only supply the canvas. In this case, all fastening materials must be purchased additionally. When choosing curtains, you should pay attention to the fact that different rooms fit different types blinds. For example, they are most suitable for the bathroom due to ease of cleaning. plastic blinds, in the kitchen - made of aluminum or fiberglass, because they do not burn, and in the bedroom, fabric-based products will create coziness and comfort.

There are a few rules to keep in mind during installation:

To install horizontal blinds more evenly, you should first make a mark on the bottom of the window where the side should end, since alignment along the longer vertical side will correspondingly align the upper perpendicular one.
Some companies offer to use special screws for installation, which can be screwed directly into the window profile;
If the fastening plates do not fit tightly to the window profile, special U-shaped pads are used, which, depending on the gap, can be used from one to several pieces.

You should also remember that vertical blinds should never be moved by hand if they are deployed so that they completely cover the window. This may damage them. You must first pull the chain and turn the slats perpendicular to you and only then can you move or move the curtains-blinds themselves.

In case of detection of defects, bad work If the blinds squeak or do not turn, be sure to call a specialist from the company where you made the purchase. It’s better not to do anything yourself. Although it seems simple enough.

Of course, everyone loves cleanliness, but new blinds have a certain coating that wears off very quickly. In this regard, it is best to completely soak the blinds, let them stand, and only then carefully wipe with a soft sponge, rinse and let them dry on their own.

But vertical curtains must be cleaned extremely carefully with a dust whisk or a vacuum cleaner with an air intake regulator.

Important! You should always remember that when using products, you should follow the operating instructions.

A sharp tug on the cord of vertical curtains leads to their breakage.

I like

Housewives do not always prefer curtains and tulle to decorate a window opening. Many of them replace the usual decor with blinds, which do an excellent job of regulating the level of sunlight entering the room. In addition, this interior element is an excellent decoration for the room and fits well into many interior styles. However, installation of these products requires certain skills. How to hang blinds on plastic windows yourself?

What types of blinds are there?

These practical decorative products can be made from aluminum, plastic, fabric, wood and even thick paper. There are these types of blinds:

Roller or roller blinds. Such products are made from fabric. They work on the principle of twisting the fabric onto a roller while lifting it up. Mini-blinds are installed on the plastic window sash itself using special fasteners. The decor can be mounted on straight or inclined windows. Shutters with blinds can be opened easily.

Vertical. In this case, the slats are arranged vertically and connected by a ribbon or chain at the bottom. They are mainly made of fabric or plastic. Vertical blinds are rarely mounted on a plastic window, because the elements of the mechanism are located very close to the glass, which makes their operation difficult. Most often, such products are installed on upper slope, ceiling or above a window opening.

Horizontal. This version of blinds is most often used by designers when it is necessary to decorate a window opening in a practical and stylish way. The slats are located horizontally and are connected by a lace. For installation on a plastic window, special brackets are used.

Pleated blinds. The products are an accordion that is hung on a window or attached to a cornice. Made from pleated thick fabric or special paper.

Day-night blinds- this is a successful alternation of transparent and matte lamellas located horizontally. Usually mounted on a window.

Roman curtains. One of the varieties of blinds, somewhat similar to pleated blinds. But when lowered, the blinds are a single piece without creases as in the pleated version. Such elements are made from fabric, bamboo, and straw.

There are also multi-texture blinds, which are vertical slats made of plastic that form intricate patterns when layered on top of each other. There are also protective products in this category, which are mounted outside and are designed to protect the window from external manifestations, sun, rain, wind, and intruders. Made from iron, plastic or wood.

How to choose the right model

First of all, you should focus on the design of the entire room. If the room is decorated, for example, in provencal style, then stingy “office” type vertical blinds will look out of place here. In this case the best option There will be Roman blinds or pleated blinds with a suitable print. But in a room decorated in a “minimal” style, a vertical model will look optimal.

Some more tips for choosing the best blinds:

Please pay attention to where the products will be attached: in window opening, on the wall above the frame, on the frame itself, under the ceiling, separately on each sash. Depending on this, we choose the type of fastening.
We take measurements carefully. It is worth remembering that blinds placed behind the window should be 10-15 cm wider than the window opening.
We select the type of blinds - vertical or horizontal. The first option will lengthen the space, and the second will visually enlarge the window.
We choose the texture and material. Here you should focus on the style of the room and personal preferences.
Correct color scheme- the key to successful window decoration. There are several generally accepted design rules- if the room is decorated in dark colors, then the blinds on the windows should be light and vice versa. Horizontal blinds look better in the kitchen, and vertical fabric blinds in the bedroom.

After the right option The blinds have been selected, you need to start installing them.

DIY installation

Usually, special mounting materials are included with the product. We will consider the option of installing standard aluminum blinds horizontal type. The whole process is divided into several stages:

Marking of fastenings. It must be carried out with an accuracy of one millimeter so that the blinds are positioned symmetrically.
Drilling holes for screws. At this stage, holes with a diameter of up to 3 mm are made in the marked areas. It is enough to drill one at each corner.
Installation of the fastening structure using self-tapping screws.
Installation of blinds on mounting structures.

After this, you need to check the quality of the work.

It happens that it is impossible to drill a plastic window due to the design features. In this case, you can use super-resistant glue. You just need to glue it mounting structure To plastic frame window. All further actions are performed in the same way as for drilling.

Also, as part of a gentle installation method, you can use special plastic fastenings L-shaped as in the photo below, which maintain the integrity of the profile and provide reliable fastening blinds. They get hooked on top part casement windows.

It is better to give preference to blinds produced by well-known brands so that the product lasts as long as possible. The adjustment mechanism should be as convenient as possible during operation, so it is important to take into account the features of the window opening and location window design. Turning the window handle should not have a mechanical effect on the blinds, otherwise they will quickly fail.

It is necessary to regularly care for the blinds, avoiding their thorough contamination, as this can negatively affect not only the aesthetic qualities, but also render the mechanism of the product unusable.

Using our instructions, you can quickly and easily install blinds on plastic windows without the help of specialists.

You can install vertical blinds yourself if you follow step by step instructions installations. It is also important to know how to care for blinds and what types are intended for which windows.

Kinds

Vertical blinds are divided into the following types: classic, inclined, corrugated, arched, day-night and accordion. When installing vertical curtains, it is important to know which type is suitable for which window and interior:

Classic. Made from fabric, paper or plastic. Designed for room darkening, protection from heating by sunlight, zoning internal space premises.

Oblique. A type of pleated specifically for windows that are located at an angle in the attic or ceiling. Their feature is a specific assembly system, which does not allow the canvas made of any material to sag when at an angle. Mostly inclined models are produced with electronic control.

Corrugated. This type is a vertical and horizontal double pleat. As a result, the folds look smoother, neater and denser. A corrugated model made of plastic and paper in this design absorbs a significant part of the heat and protects the room from bright light.

Arched. Maximum flexibility fabric sheets, which take any shape, like a paper fan. Good decision for rooms with non-standard form windows (arches, trapezoids, triangles, beveled windows).

"Day Night". The canvas of such blinds consists of two layers of fabric: light, permeable a large number of light fabric for daytime use and dense, dark fabric for protection from the bright sun during the day and prying eyes in the evening.

Harmonic. The design consists of a control mechanism (chain or electric drive), weights, and pleated fabric that resembles accordion bellows. The range of materials, colors and textures is very diverse.

Peculiarities

This product has a number of distinctive features:

They can be closed from top to bottom (classic canvases), from bottom to top, or from both sides at the same time. At the same time, the degree of density of the “accordion” can be adjusted: by closing either the top, or the bottom, or central part window.
Suitable for covering irregularly shaped windows.
Optimal solution for attic, attic, ceiling and inclined windows.
When opened, the canvas is compactly folded and hidden inside the cornice.
Convenient for installation on all types of windows.
Various ways fastenings and control mechanisms (manual and electric).
The woven fabric is washable.
The curtain fabric can be made of two types of fabric at the same time, which makes it possible to regulate the degree of transparency, darkness, and sun protection.
Easy installation you can do it yourself.

Advantages

The following are distinguished:

Compactness. Blinds occupy a minimum of space, allowing owners to show their imagination and organize additional window decoration or leave the window sill as a functional surface.
Simple and clear type of control.
Long term services. Special impregnation protects the canvas from dust, grease, dirt, moisture, and abrasion.
Ease hygiene procedures. They do not require special care. It is enough to wipe their small surface area with a damp sponge and soapy water once every few months.
A variety of designs for interiors in any style.
The tight fit of the canvas to the surface of the glass protects equally well from heat and cold.
Possibility to install the system yourself.
A variety of materials: from light window decoration to total blackout protection.
Possibility to combine blinds with curtains, tulle, lambrequin.

Required Tools

To install vertical curtains, you don't need many tools. You will need: a stepladder, a set of screws from the kit, a building level and drawing supplies, a drill, a screwdriver.

The following will definitely come in handy: a bracket for the ceiling and for the groover, fasteners, corners, clamps, monofilament, stoppers and c-clips, rings for the rod, chain locks, replacement parts. Each instruction contains a detailed list of necessary components.

How to take a measurement

The final result depends on how correctly the measurements are taken. Even expensive ones beautiful models will not look good on the window if there are gaps in the opening or the edges of the slats are constantly rubbing against the wall.

It is important to pay attention to the following points:

For maximum accurate indicators A steel tape measure is used.
The obtained figures cannot be rounded; accuracy must be maintained to the nearest millimeter.
When ordering blinds, the width parameter is indicated first, length – second.
Not a single window opening is absolutely perfect. geometric shapes, therefore measurements in height and width must be made at least at two points.

When installing in a window opening, you need to determine the width at the top of the arch and subtract 20 mm. To determine the height, compare the height of the left and right side arches, subtract 1 cm from the smaller value. For wall mount you need to add at least 10 cm to the wide side of the slope. The length of the slats can be any, but it is recommended to retreat 2 cm from the edge of the blinds to the floor. Ceiling installation implies determining the height (to the floor or window sill) minus 2 cm, it is recommended to increase the width of the arch by 100+ mm.

Mounting options for plastic windows

There are several mounting options: with and without screws.

With self-tapping screws:

It is necessary to mark the places where they will be located.
Then make holes and attach the brackets.
Secure the blinds.
Also make two holes on the bottom.
Secure the ends of the blinds with plugs.

Without self-tapping screws. First of all, you need to mount the curtain, assemble the brackets and install them on the reel. Then this structure must be fixed on the window in order to mark for fastening. The second step is to attach the brackets with adhesive tape at the top of the frame and the string tensioner at the bottom. It is not necessary to pre-attach them with tape, but it is advisable to eliminate problems with subsequent drilling of holes for screws. After installing the guide string, the curtain itself is mounted into the mechanisms.

How to care

Due to the peculiarities of their composition, the materials from which blinds are made do not require special care. Once a month, such curtains can be dry cleaned, and once every few months - wet cleaned. A good addition would be treatment with sprays against fading, exposure to moisture and dust.

If necessary, you can wash such blinds using a gentle wash cycle or by hand.

How to properly attach to the ceiling

Vertical curtains They are attached in three ways: to the ceiling, to the frame with drilling, to the frame without drilling.

In all cases, the fastener is a cornice with or without a decorative facade. The brackets on which the structure is supported are fastened with self-tapping screws, hung or glued with double-sided tape. Special tape seems rather impractical, however, it is fixed very firmly, so it is important to correctly mark for installing the brackets. Once they are glued, moving them will be quite difficult.

The procedure for installing vertical blinds:

Preparing tools.
Applying pencil markings for installing brackets. To securely fix the fasteners, it is recommended to drill holes for self-tapping screws at the same stage.
Fastening the brackets in a suitable way (with or without drilling).
Installation of cornice.
Installation of slats. To do this, you need to pull the control cord, with the fastenings for the slats located on it, so that they are in the desired position.
Then fix all the slats on the hooks of the fasteners.

Wall mounting

Installation work Wall decoration requires certain skills and experience; it is necessary to take into account some nuances and features. Installation of blinds begins long before preparation work surface and a set of tools:

The first step of this process is an informed decision regarding the type and variety of blinds, material, color and texture, depending on the functionality of the room.
Second important point- this is the correct marking. Much, if not everything, depends on it, including how easy the installation process will be. If all the features of the architecture window openings will be taken into account by specialists when ordering blinds from them, everything will go easily and smoothly without the help of professional installers.
It is also important to consider whether it will be possible to open the window after installation, how the light protection devices will work, and whether there is a risk of deformation for them.
Installation of blinds. Must be carried out exactly with markings and subsequent verification of the functionality of the structure. The most important point here is the choice between fastening with drilling and fastening without it.

How to hang on the balcony

To install, you must follow these steps:

Degrease the areas of the balcony and fasteners that will be connected with adhesive tape.
Install blinds.
Assemble the brackets.
Mark the mounting brackets. To do this, you need to attach the brackets to the assembled blinds, install them on the window without fastening, mark with a pencil the places for the adhesive tape, and remove the curtains.
Install the string guide against sagging. Attach to the “ear” of the top bracket and weighting of the curtain, and fix at the bottom in the tensioner, which is installed on the frame.

With the advent of inexpensive, high-quality and lightweight materials from which they are made, they are again gaining popularity as window light-protection devices. How to hang blinds yourself will be discussed in this article.

There are three types of blinds:

horizontal;
vertical;
roll

When purchasing, you should make your choice not only based on financial and aesthetic considerations, but you also need to take into account the shape of the window opening, the size of the window and the width of the window sill. If the plastic window has a non-standard configuration, and the shape of the window opening differs from rectangular, then it is correct to hang horizontal or roller blinds It will be very difficult or even impossible. However, ceiling-mounted vertical blinds are well suited for such a window.

The complexity of installation also plays a role. For example, standard vertical structures are easier to install, and today they are used not only in offices, but also in the design of residential premises. A wide range of colors and a variety of shapes allow these light-protective devices to be used in a wide variety of design solutions.

Today, blinds have become especially popular, although they appeared on the market not so long ago. Some time ago they could only be seen in shops, public institutions and office buildings. But over time they began to be installed in apartments and country houses.

For plastic windows, sizes may vary in both length and height. For this reason, it is important to determine the size of the blinds you purchase in advance. First of all, measure the window very accurately. Remember that the length and width should be large enough to be visible to the part of the glass unit.

If you are planning to install it yourself and are afraid of errors in calculations, consult with the store salesperson. He will help you complete all the calculations. If the window is double-leaf, the lifting mechanism should be on both sides - right and left.

Window measurements for blinds

Marking the future installation site

First you need to unpack the blinds and carefully study the information provided on the packaging. After this, according to the instructions, it is necessary to accurately mark the location of the fastening elements so that the blind container is securely held. Markings can be made using a pencil, tape measure and building level. Pay special attention to this process to avoid distortion. It is important to provide for the possibility of adjusting the container so that the slats do not extend beyond the window.

Installation Features

Proper installation of blinds on plastic windows, a video instruction of the process is presented in the article, allows you to do the job correctly and efficiently. Installation will require special precision and care from you. There are three main installation options:

into the overlay;
into the window opening;
for each sash separately.

How are blinds attached? The attachment is carried out closely to create a harmonious solution. A plastic window can be drilled with a thin drill according to marks made in advance. After this, the brackets are attached using self-tapping screws. The brackets are installed with the latches facing up. Then insert the container with the blinds and close the latches. Check the accuracy and reliability of the fit.

After this, the lower holders are installed. For correct execution work, release the curtain and mark its position. It should not dangle, but remain taut. After this, holes are drilled in the same way. Then the holders are screwed in using screws. This allows you to securely fix the canvas with slats. Make sure that when ventilating they do not lag behind the window.

The canvas must be pulled out of the holders located below. Then lift the curtain up. Thanks to the control cord, the curtain opens and closes. The container can be easily removed and installed back. They are successfully held on the surface of the window using a bracket. If you don’t know how to remove blinds from a window, the video presented in our article will come in handy.

Features of choosing blinds

The specific choice is determined by the interior design style. There are several basic designs:

horizontal;
vertical;
cassette;
and others.

The most popular blinds are still made of plastic. They are easy to clean, last a long time and do not harm the health of people and pets. For this reason, they are often used for installation in apartments and country houses. Another interesting option– blinds with wooden slats. If the window is in a constant draft or is corner, the blinds are fixed at the bottom. Roller shutters strong wind will swing from side to side. They can sag, hit the profile and lose their original appearance.

Original design blinds for windows

Mounting options

How to attach blinds directly to a window? Once you have chosen the type of design that suits you, you can order your blinds from a reliable window manufacturer. The best option you will contact the company where you bought the windows. To order you will need exact dimensions windows and sizes of future blinds that will be installed on top of the window opening. The production of blinds is carried out quickly, and the technologies are as well developed as the production of the windows themselves. In addition, they have a fairly simple design.

DIY cassette blinds for windows

There are usually instructions included in the package. It describes in detail the process of installing blinds. The process itself is simple. For this reason, you may want to do the work yourself. If you have necessary tools and experience working as a screwdriver, you can begin installation without the help of a specialist. The following tools are required for work:

screwdriver;
ruler;
screwdriver;
pencil.

Let us consider in more detail the option of installing horizontal blinds separately for each sash or section. This process is somewhat complex, but the work is carried out in a similar way.

Wooden horizontal blinds for windows

Manufacturers include everything needed for installation in the box. The main part is wound not only with fishing line, but also with a control chain. Additional items and screws you will find in bags. How to hang blinds? Unwind the blinds carefully and remove the trim from the cornice. There are several options for attaching blinds to the sash, among which are the following:

screw installation,
installation on brackets,
drilling holes in the wall surface.

When installing with screws, you need to make holes directly in the profile. This option is one of the most durable and reliable mounting options. The tightness of the profile will not be affected. But this option is not suitable for everyone, because it may be necessary to remove the blinds. As a result, holes will remain, which will become a large external flaw. To avoid this, use mounting on brackets. They do not require the creation of additional holes.

Installation with plastic drilling

When using the drilling method, you will need screws. To do this, you will have to make precise markings on the windows. It is important to outline the future position for the top bar. It will be attached directly to the surface of the window. The simplest and most popular design is the one located at the top of the glass unit. It fits onto the window frame with grooves. Thanks to strict binding to the top of the sash, it becomes possible self-installation blinds, even if your calculations are not very accurate.

Installation of blinds with self-tapping screws

In the case of plastic windows, you can get by altogether. Most roller shutters are equipped with screws for reliability. They are installed directly into the profile. The carrier is applied to the window directly under the top of the frame on the sash.

Please note that the mounting plate and window may have different plane depths. Because of this, the mounting plates may not fit tightly enough to the window.

Use U-shaped shims to securely fasten the plates and eliminate any possible gap. One or more pads may be needed. They should completely close the gap. The position of the carrier is marked along the lower edges of the plates. Then you can focus on them. As a result, you will be able to install the blinds smoothly.

Window blinds are also installed using screws directly into the profile. A screwdriver is used for this. The screws fit easily into the plastic and hold well in it. It is necessary to make markings first. Holes about 1.5 mm in size are drilled through it. This eliminates the possibility of screws moving and eliminates the appearance of cracks in the profile. As for the last option, it is almost impossible on new windows. But this possibility exists with old plastic or wooden windows.

When the last screw is screwed in, you need to attach the fishing line. It allows you to securely hold the blinds on the sash if it is opened. To do this, holes are made on the sides of the lower glazing bead. They must be exactly in accordance with the fishing line exits on load-bearing elements designs.

Installing horizontal blinds

You will need a 2.5mm drill bit. The fishing line must be threaded into special plugs that are included in the kit. Then a knot is tied on the fishing line. All you have to do is thread it through the holes in the plug and pull it on top. Make sure that it does not sag or become too tight.

All you have to do is put on the trim and check the result of the work done. The fasteners used for the control chain and flexible lever are installed in the right places.

Installation without drilling

If you don't know how to secure the blinds without drilling into the windows, brackets will do. They are attached directly to the surface of the frame. The carrier of the blinds will snap or screw directly onto them. Similar system It is interesting in that you can easily remove the blinds not only for cleaning, but also completely remove them from the window opening. There will be no extra holes left on the visible part of the window and the seal of the windows will not be compromised.

Installing blinds on windows with your own hands

The brackets are attached with screws, but other options can be used:

fastening with double-sided tape;
hook on the upper part of the profile when installing on opening sashes.

The latter option allows you to make a removable structure, when even the brackets can be removed from the window. You don't need to carry out additional work using a screwdriver and making holes. When using double tape, fastening is carried out in the same way as with screws. But instead of screwing, they use tape. To hold the fishing line, instead of holes, fasteners are used, which are installed on tape at the bottom of the frame.

Features of installation to the wall

A large number of products are sold in the modern market various fastenings. But the most relevant installation is using a drill. You can see how this mounting option is implemented in the video. The craftsmen from the videos do not spend much time and use a hammer. But it’s better not to be lazy and make a couple of holes. This will increase the service life of the entire blind structure.

Features of installation on wooden windows

Are you thinking about how to attach blinds to wooden windows? This is the most difficult option installation Blinds are attached to each section of the window. The roller shutters themselves are installed in a similar way. All necessary parts are included with the purchased kit. They need to be taken out and unpacked. Remove the trim from the cornice. Install the blinds to the window using screws and brackets.

If you use screws, the window will remain sealed. It is the most durable and reliable option. But if the blinds are removed from their installation site, visible holes will remain. The second option is not the most reliable. The brackets are attached to the frame itself without using holes. Therefore, when removing the blinds, there will be no defects on its surface.

Do-it-yourself cassette blinds for windows Window measurements for blinds Wooden horizontal blinds for windows Horizontal blinds for windows Original design of blinds for windows Cassette blinds for windows