I make very beautiful pipe lamps

Do-it-yourself volumetric lamps amaze our imagination magical game light and shadow. But no less surprising is that these strikingly beautiful lamps are made from an unexpected, simple and very affordable material.

Usage pvc pipes, as a basis for a lamp, gives wide and unusual features for the manufacture of. You can cut through a pipe, you can make penumbra by simply removing the thickness of the pipe, you can make volumetric compositions by carefully bending parts of the pipe.

As the author of these lamps, Ademar Rocha, says, to make a lamp you need hand drill with a set of different attachments, and a construction hair dryer, which allows you to give the cut parts of the pipe the desired curved shape.

Drill attachments allow you to process the edges of the volumetric parts of the lamp, make texture and surface cuts on the pipe, which will create the necessary halftones in the intended light composition. All this will give the lamp a neat, finished look.

Of course, our lamp needs a fairly heavy stand, which will give stability to the vertical structure.
For fire safety it is better to use energy saving light bulb, which heats up minimally.

LEDs can also be used as a lamp in such a lamp. These are not only safer, but also give more possibilities for color lighting.
Because LEDs allow you to change the color of illumination, then your lamp can please you either green, then red or golden color. In addition, LEDs practically do not heat up.

Such a lamp, carefully made with your own hands from ordinary pipe, will be an unexpected gift for Valentine's Day. And such a musical lamp will be appreciated by a music fan. A similar lamp can be made from the linings of two pipes of different diameters.

The surface of the lamp can be painted, and then when turned off it will fit better into the interior of your room.
You can use pipes for the lamp various diameters. For example, this lampshade for a chandelier is made using the dot cut method from a wide PVC pipe.

Not only volumetric lamps are beautiful; by drawing the desired pattern on the pipe and making points on the pipe along its contour, you will get a simple design, but a wonderful result beautiful lamp. Use not only through holes, but also translucent holes, this will make your lamp more interesting.

Copyright lighting are sold at incredible prices. In fact, making a lamp from pipes yourself is not a problem at all. This does not require the purchase of expensive materials or in-depth knowledge of electrical engineering. Let's consider several options for homemade lighting elements from scraps of various pipes.

Desk lamp

An original lamp made of pipes will add some zest. The structure can be assembled from scraps available on the farm or purchased material at a hardware store. After purchasing all the materials, it will take no more than an hour to assemble the lamp.

Among the necessary components:

• Long and short nipple.
• Six pipe squares.
• There are the same number of small nipples that serve as corner clamps.
• Three purposes.
• Drill.
• Wire with switch and plug.
• Insulating tape.
• Hot glue.

First, all pipes are treated with solvent, and the stickers are removed. The light element is inserted into the socket, after which the wire is pulled through the square. The light bulb socket is fixed with glue. The structure is processed carefully so as not to affect the threads, after which it is left until the adhesive composition dries.

Main stages of work

Subsequent assembly of the lamp from pipes is carried out in the following sequence:

• A hole is prepared in the tee for the wire with reverse side using an electric drill.
• Pipes are assembled along threads using nipples.
• 4 corners are taken as the base, three tees are twisted together, the standard hole is directed upward, and the homemade socket is directed to the lower invisible part.
• Two nipples connected to each other will serve as a holder.
• The cable is pulled through pipes without a switch.
• The switch is assembled and connected.
• The functionality of the assembly made from pipes is checked.

This design is easy to fix if you are not satisfied with the resulting design. The result is an excellent and inexpensive night light or work desk lamp.

Wall option

The pipe lamp, the photo of which is shown above, is made as follows:

• The grille is removed from the old street-type lamp. If it fits into the interior, this is not necessary.
• A pipeline flange is attached to the cartridge, which will serve as a base fixed to the wall.
• Then it is connected to a tee, nipple and angle. Another flange is attached, then the wiring is pulled through the pipes.
• The height of the lamp placement is adjustable.
• The lamp is connected to the socket and the switch is mounted.
• The flange is attached to the wall using screws, and the operation of the device is checked.

The operation will require the following materials:

• Lamp with or without grille.
• A pair of black nipples for plumbing purposes.
• Cable.
• Two metal flanges, the diameter of which matches the size of the cartridge.
• Screwdriver and fixing screws.

Loft lamps made of pipes with a concrete base

The lampshade is made from several wooden hoops for embroidery and watercolor paper. The whole process is divided into mold preparation, manufacturing concrete base, connecting wiring, assembling and fixing pipes, as well as arranging a lampshade. The container for pouring can be made of plastic; its dimensions must be sufficient to support the weight of the entire structure.

Initial stages:

1. Using a knife, make a hole for the cable.
2. The reinforcement wire is placed in a container.
3. The cord is threaded through the pipes with the necessary margin.
4. Marking tape is used to mark the exit of wires from the solution.

The cord must fit into cement mixture at the point of connection to the switch, then fed through the middle part of the pipe flange, in which a hole is provided.

Final part

Further production of a lamp from water pipes is divided into several stages:

• Done cement mortar, which is poured into the prepared form.
• The switch is fixed flush with the surface. Be careful not to let it drown in the mixture.
• Mount the flange on top of the solution, thread four mounting screws through the holes.
• After preparing the base, the wires are threaded through the pipes, attaching them to the flange.
• Next, the free edge of the cables is pulled to the cartridge, after which the latter is attached inside the pipe.
• The light bulb is screwed in, the switch is connected and turned over.
• A lamp with a low power rating can be left open.
• For a powerful light element you will need to build a lampshade. To do this, take two hoops and watercolor paper, and treat the seam with wood glue.
• This design allows you to choose any color and fabric covering used.
• The finished lampshade is attached using small screws that are screwed into the inside of the hoop from above, or with a thin wire attached to an additional flange of the pipe.

LED lamp

PVC pipe is ideal for of this device. It is worth noting that this option is equipped with autonomous power supply. The design of the lamp is as simple as possible; anyone can assemble it with a minimum of tools and materials. Several pieces of pipe will be required bigger size for the base, including angles and fittings, as well as a smaller diameter PVC pipe for the stand. The system uses a resistor with a power of at least 1 watt. This indicator is designed for 6 LEDs.

The circuit is connected in the standard way. It is recommended to use type. This will allow you to quickly make a nest for it in the pipe and will not require cutting additional elements in the form of a rectangle under the slide switch. In addition, the switch should not be instantaneous, otherwise you will have to constantly hold the button to operate the device. The lamp made of PVC pipes is equipped with a lampshade. Its painting is carried out in several layers. Otherwise, when the diodes are turned on, streaks or uneven processing will be visible. A battery of suitable capacity is mounted at a distance of 80 millimeters from the edge of the pipe at the base. You can also install a switch there. The main thing is that these details do not interfere with each other.

Loft chandelier made of pipes

Modern trends in lighting organization often require taking into account not only the efficiency of lamp elements, but also the chandeliers themselves. You can create them yourself from scrap materials, while getting an original and inexpensive design. For example, it is possible to do ceiling lamp from plastic pipes. To do this you will need the following components:

• Ceiling type socket.
• 12 branches for sockets and light bulbs.
• Polymer water pipes.
• 12 small lamps.
• A can of special paint.
• Paper.
• Ceiling rosette.

The work begins with developing a model of the chandelier and connecting the branches to each other. You can create both a symmetrical design and an original author’s model (it all depends on your imagination). Next, lay out the paper on which the painting process will take place. Paint on all sides and leave the lamp to dry. The ceiling rosette is painted with visible side. If necessary, the chandelier can be sprayed again. Then all that remains is to connect the structure to the ceiling using screws and a flange, and also screw in the lamps. Check the design and enjoy a unique product. By the way, if you get tired of the configuration of the lamp, it can be transformed into a different style in a few minutes.

Adjustable Table Lamp: Initial Manufacturing Process

This DIY pipe lamp is distinguished by the fact that it can be adjusted in reach and height. Many replacement parts are available to find at home, so it is also economical and also custom.

Materials used:

• Bicycle star.
• Pair metal pipes with half-inch thread (length - 450 mm).
• Flange.
• Fitting.
• Two elbows at 45 and 90 degrees.
• Two copper tubes by ¾.
• Socket.
• Polymer bushing.
• Electrical cable.

The bicycle sprocket will serve as the base. Holes for the flange are drilled in its center, after which it is painted. Then it is screwed into the flange iron pipe. The upper part of the element is attached to the base of the lamp, and the second part with a larger diameter is installed in such a way that a sliding effect appears. This will allow you to recline top part structures by moving the top tube.

Final part

To fix the pipe, a hole is drilled in the lower compartment for a fixing screw. A pipe with a diameter of ¾ is soldered, which will allow for alignment and also obtain original look. As a stopper, you can use a ¼ bolt, which is attached to the outer handle of the faucet. The lampshade can be made using one of the methods described above, attaching it with screws and painting it with copper or gold paint.

The rubber bushing is mounted in the opposite end of the fitting, after which the end of the wire is cut off and pulled inside the pipe to the cartridge. The lamp is screwed into the socket, around which the casing is clamped. A similar lamp made from water pipes will make it possible to provide required quantity light at different conditions. At the same time, its cost is minimal.

One of the tools that helps create a comfortable environment in the home is a beautiful lamp. Available in stores a large number of various models. The better and more beautiful the device, the more expensive it is. Therefore, many craftsmen decide to make lamps from pipes with their own hands. There is nothing complicated in such a process: having in stock simple details, you can make a unique design. Plumbers can make such devices with particular ease.

In this article:

Assembling a chandelier from pipes

Conventional chandeliers are chosen as the main source of light in living rooms, kitchens and bedrooms. A device made from scrap materials will help you diversify the design of your room and stand out from your friends and acquaintances.

To assemble a lamp from polypropylene pipes and fittings, you will need the following components:

• a lampshade with a grille from an industrial lamp;
• two pieces of plastic pipes;
• the wire;
• plumbing tee and angle;
• two flanges, the same size as the cartridge;
• wooden block or other base;
• spray paint;
• paper;
• screwdriver and screws.

First, disassemble the lampshade by removing the grille and socket; if a lamp with a grille looks good in your interior, then leave it. On outside cartridge, screw the metal flange. Be careful not to damage the wires.

Screw the plastic pipe to the metal flange, then attach an angle in series, then another piece of pipe, a tee, and finally end with a flange again. With each new part, do not forget to stretch the wire.

Make several of these structures, and after everything is ready, they can be screwed to wooden base. Don't forget to bring out and connect the cables to central system. The finished product can be painted in any color so that it matches the interior of the room. Don't forget to lay down paper before doing this so as not to stain the floor. Screw in the lamp and, by flicking the switch, check the functionality of the PVC pipe lamp.

By excluding the corners from the design and lengthening the plastic pipe, you can make a floor lamp. The main thing is to prepare a stable foundation.

Wall lamp made of flexible metal-plastic

You can assemble it yourself Wall lights from water pipes with rotating lamps. To change the angle of incidence of light, it will be enough to turn the lighting fixture in the desired direction. During work you will need:

• flexible plastic pipes 20-50 cm long;
• solid birch, pine or thick plywood for the base;
• electrical wire;
• socket and lamps;
• jigsaw;
• screwdriver and screws;
• spray paint and paper;
• sealant.

We make holes in the base that match the diameter of the pipe. From a small block, cut out a place for attaching the cartridge; do not forget that the metal-plastic housing will be supplied from the reverse side. Pull the wire through the flexible base and solid wood or plywood.

Let's insert metal-plastic pipe into the base and secure it with screws or glue. We fix the cartridge in the prepared block, and isolate the contour with sealant. Ready design We paint it from plastic pipes in a pre-selected color and after drying we hang it on the wall.

You can make or buy a beautiful floor lamp to go with the socket - then the pipe lamp will look more attractive.

Coupling table lamp

Let's return to the loft style, only now we'll make a table lamp with one light source. It is suitable for a study at home or office. Depending on the chosen light source, such a product will help you either concentrate or relax.

Required tools and materials:

• long and short nipple;
• fitting (six metal corners and three tees);
• six small nipples that will connect the corners;
• drill with metal drill bit;
• wire with plug and switch;
• glue;
• insulating tape.

Prepare metal parts, having previously cleared them of greasy stains white spirit. Since the reins will need to be pulled through narrow holes, cut out the switch. Screw the lamp into the socket and insert it into the first square, first pulling the wire through the part. Secure the lighting fixture in the designed position with glue.

Make a hole in one of the tees for the cable outlet. In order not to make a mistake with the drilling location, imagine how the lamp will stand.

We screw small nipples to the central tee with a hole. We connect tees with nipples and corners on the sides to them. This will be the base of the product. We screw the corner in which the lamp socket is located to the long nipple, followed by the corner and the short nipple. We connect the two parts of the lamp together. Don't forget to run the wire in advance. Reinsert the switch and check the operation of the desk lamp.

Such lighting fixtures made from parts of the pipeline will show guests and family your resourcefulness. When you see the finished result, you will experience great joy and pride. DIY lamps will last a long time and will never go out of style.

It has been repeatedly stated that very unusual and spectacular products for interior decoration are obtained from materials that seemingly were not intended for this purpose. Many decorative items are obtained from disposable tableware, plastic containers, all kinds of cases, lids and stoppers. And from plastic bottles they build almost anything, from boats and rafts, to sofas and armchairs, from baskets, organizers and vases, to earrings, bracelets and rings. PVC pipes, whose purpose is to cope with sewage needs, are no less successful.

And so, it would seem, from such prosaic, albeit practical, everyday life, plastic pipes reach a completely different level of existence: skillful hands and imagination turn them into extraordinary, almost fairy-tale night lamps.

It’s hard to say who first came up with this idea, but today craftsmen from Brazil, Argentina, Australia, and China are making PVC lamps, and fans of this curious thing have also appeared in our country design technique. The manufacturing process is quite simple; even a teenager who knows how to use power tools can handle basic models. The lamp is made by applying through holes through which light will penetrate.

To make a lamp from PVC pipes, you will need a drill with various attachments: drills of various thicknesses and grinding attachments with abrasive. The pipe itself is chosen to have a fairly wide diameter, from 20 to 50 cm; you need to focus on what place the lamp will occupy in the interior and what pattern will be chosen for application.

The simplest models of lamps can be made using the same type of perforation with a drill; complex, three-dimensional models include not only a pattern of holes of various diameters, but also working with the thickness of the pipe, removing plastic in layers, as well as cutting out and adding volume to some details of the composition.

Before starting work, we determine what size our lamp should be. Dimensions determine the diameter of the pipe and its height. Then we select the template of the desired design. It can be a simple ornament, a composition like patchwork or floral motif, either a plot or a thematic picture.

The contours of the pattern are transferred to the surface of the PVC pipe in a convenient way, including paying attention to the top and bottom edges. When getting started, consider the required hole diameter when using different drills. Even just by making holes of different sizes along the contour of the pattern, you can already get a finished lamp.

A more elegant drawing is obtained if you use light halftones. This effect is achieved by removing layers of polyvinyl chloride from the surface of the pipe. To do this, use abrasive attachments on a drill. The more layers removed, the more light will be visible through.

If a 3D effect is needed, the contours of those parts that should protrude beyond the pipe are first thinned using the same abrasive grinding attachments, then cut out construction knife. To give them shape, they are heated with a hairdryer, better than a construction hair dryer, it gives more intense and uniform heating, and they are bent to the side. When cooled, this shape remains.

A lamp made of PVC pipe will look great in the interior in white, so to speak, the pristine color. But if you want to have a color design, then it’s as easy as shelling pears; it’s painted with PVC paint from aerosol can.

After the decorative part is completed, it is time to take care of the practical side of the issue. This lamp requires a reliable heavy base; it will allow the lamp to become stable.

The light source for a vinyl chloride lamp is chosen energy-saving lamps, they will not overheat the decorated shell. Even more interesting is the use of LEDs, for example, light garlands. Then the color effects of the glow are used, making the lamp even more attractive.

Do you want to reduce or increase the voltage? Buy a 220-110 transformer. Affordable price and quality that will last you for many years.

We often come across articles that describe how you can create unusual, but at the same time useful things for your home or apartment from unnecessary materials, which, for example, were left over after renovation. You can also make crafts from plastic bottles, disposable tableware, corks, and the like. But in this article we will talk about such a material as PVC pipes, which, according to the rules, are needed and used in the sewerage system, but now we will describe how to make useful thing, such as a lamp made from PVC pipes.

From a completely simple and inexpensive material you can create something fabulous and fantastic; the most important thing here is to have skillful hands and rich imagination, the rest remains to be done. Thanks to these good qualities you can create wonderful and beautiful night lights in the form of lamps.

In fact, we don’t know who first came up with this idea and created such beauty as a lamp from PVC pipes, but in our time people of such nationalities as Brazilians, Argentines, Australians and Chinese are engaged in such handicrafts, but ours is no exception country Russia.

To implement beautiful crafts We will list the materials and tools that we will need during the work:

1. A drill with a sufficient and varied set of attachments that have different thickness and they can also be distinguished by the types of grinding, we will need abrasive ground tips.

2. PVC pipe. When choosing, you need to take into account the size, that is, the diameter, it should be in the range from 25 to 55 centimeters. At the same time, provide a place in which your night light will stand or hang and the dimensions of the pattern that you will cut out on the pipeline.

Wireless lamp made of PVC pipe

If you don’t want to spend a lot of time and effort making a lamp from pipes, then the work can be done with just one drill. But if you want to make a design that is voluminous and complex in its composition, then for this you need to include in the work the making of small to large holes, complex rhinestones, working with the thickness of the pipe walls, removing the outer layers to give volume and aesthetics and, of course, giving the effect 3D some details.

Before we start making patterns and rhinestones on the lighting device, let’s decide what size lamp we need. The main criteria for pipe size are its diameter and height. If you have decided on the size of the craft, then let’s move on to choosing templates and stencils for the desired design that you want to depict on your device. The patterns can be a floral type of design, a landscape or a banal ornament and the like, the choice is up to your taste.

The silhouette of the selected design is transferred to the pipe in a very simple, but at the same time convenient method, at the same time paying attention to the edges at the top and bottom. Before you start please note right size diameter of the holes in the pipe so that the drills fit your ideas. A very simple option might be a good idea, for example, you don’t need to draw and cut out various designs, you can simply use drawn holes of various diameters to cut out a beautiful decorative lamp.

A very elegant drawing is obtained when light halftones are used in the work. This effect and quality can be achieved when the outer layer of the pipe, that is, PVC, is removed using abrasive tips. The more layers you remove, the more transparent the effect will be and the light will be much brighter in these places than on a simple surface.

To give a lamp made of PVC pipes a 3D format effect, you need to attach parts that will protrude beyond the walls of the pipe, you first need to thin them using the same tips that were used when giving the light halftone, after doing this work we cut out the shape using special construction knife.

To add aesthetics and the final effect, we take a hair dryer (it provides more intense heating), heat the form to a state of elasticity and bend it to the side. We leave the mold alone and wait for it to cool; when it cools, it will remain in the same state in which you bent it during heating.

Such a lamp does not even need to be painted upon completion of the work; the natural color of the pipes (white) will fit into the design of your house or apartment quite seamlessly. But still, if you want to give the lamp a colored design, it will not take much time and much effort, you just need paint from an aerosol can.

Upon completion of work from the decoration sphere, it is worth moving on to work that will answer all practical questions. So, to complete the craft, you need a very strong and stable shelf or base, at your discretion, because a lamp made of PVC pipes must stand steadily, since it weighs a lot and is also quite large in size.

The quality of light in your device may be different kinds lighting using lamps. It is recommended to use energy-saving lamps, because they will not allow the walls of the lamp made of PVC pipes to overheat and thereby deform the decorative shell. To make the lamp more decorative, you can use a garland during lighting, it will turn out very interesting.