A prerequisite for breeding rabbits is the construction of housing, that is, a structure where animals can feel comfortable and safe. There are many options - these are houses with and without legs, enclosures and cages.

You can buy a design in a store, order it from craftsmen, or you can make cages for rabbits with your own hands, spending a little time and effort on its manufacture.

Let's look at a quick and economical option, in which construction will not be expensive, and the building can be used both temporarily and for long-term housing of any number of animals.

What do we need

To build reliable design, capable of serving as a shelter for animals under any conditions, you need to prepare the following materials:

• sheets of plywood or belt loop 2-2.5 centimeters, timber;
• galvanized mesh;
• caged doors;
• food trough;
• nails or screws weighing just over half a kilogram.

First, all the frame bars must be carefully planed. This way, all structural elements will fit tightly together, which will help avoid drafts that have a detrimental effect on animals. It will help you make your house comfortable step-by-step instruction, adhering to which you will be able to perform the work correctly at each stage.

Cell assembly. Step-by-step instruction:

1. We assemble the frame, attach a floor made of galvanized material to it, it is advisable to make it from mesh. The frame can be made as shown in the video.
2. We install the wall at the back, fasten the bottom, grabbing the floor.
3. We finish constructing the frame with side walls, including for nests.
4. The cover is installed. If you plan to move the structure outside, then you need to make sure that the roof does not leak and that the animals do not suffer from sunstroke from overheating. For this, two sheets of slate or other roofing material will be enough.
5. You can install a cross beam that will divide the structure into two or three sections.
6. We make feeders.
7. The bottom is secured with slats and nails on the inverted structure.
8. It is recommended to make a bunker for feeders.
9. For other feeds it is better to make a nursery.
10. The lid is attached.
11. It is better to make doors from frames and mesh; after installation, you need to check whether they work easily.
12. A rotary flap is installed.

At this point, the construction is completed, and the cage is ready to receive your pets.

If it is not possible to move the cage into the shade, in order to protect the animals from the heat, on a sunny day, cover the roof of the cage with branches of bushes or wild trees.

This instruction is not a dogma. It can be changed at the request of the owner or due to personal preferences. If you are going to build such a structure for the first time, listen to the recommendations of experienced rabbit breeders and read the information on the Internet.

• Many experienced rabbit breeders recommend double roofing. It will not only protect the rabbits from drafts and precipitation, but will also save them from overheating on a hot sunny day, otherwise the animals will be susceptible to sunstroke.
• If you make a roof only from corrugated slate without using plywood, then not only winter drafts and frosts will pose a danger to animals, but also spring frosts, from which the offspring may die.
• The additional use of roofing material will provide a buffer zone between the roof and the plywood, so it will not be too hot in the cage on a sunny day.
• If you are installing the cage outside, raise it from the ground a short distance; you can use bars for this. This will protect your animals from rodents and make caring for them easier.
• You can build a cage differently, look, one of the floor options is shown in the video.
• You can use a cell model called “Sunny”, you will learn about it from the video.

Beginners in rabbit breeding will benefit from the information shared on You Tube by a user named Sunny Rabbit. Watch his video below. about the advantages of single-tier structures for rabbits.

If you need a house for temporary housing of animals, you can not build a cage, but do it as the Sun Rabbit advises, watch the video. and you will find out about it yourself.

How to make two-tier buildings

To make bunk cages for rabbits with your own hands, you don’t need to spend a long time working on complex design. It is enough to install the cages one on top of the other, place a tray for litter under the top one, and make the roof waterproof and moisture-proof. Such a mobile building will be installed in any place convenient for you, and if necessary, it can be disassembled and stored in a warehouse.

What to do if rabbits chew cages

First you need to figure out why this happens. This can be caused by two reasons:

1. With the help of bars and boards, animals try to replenish the supply of minerals that are lacking in the body.
2. Animals need to wear their front incisors on something, so they chew on wooden objects.

Provide your pets with a rational and balanced diet with sufficient quantity vitamin, minerals and trace elements. Add chalk, mineral premixes or salt to the food.

Thin strips of tin can be used to cover all the places that animals choose - the edges of feeders, beams, protruding parts of the frame, etc.

Raising rabbits nowadays is quite a profitable activity. Breeders create the most comfortable living conditions for their rabbits minimum costs. To do this, they prepare their own food and build rabbit cages. But how to build a rabbit hutch yourself? This article will discuss this issue in more detail.

Preparation

You can build cages for rabbits with your own hands. It's quite simple. Initially, you need to decide on the type of enclosure and make a drawing. Next, you will need to purchase materials and prepare tools. Homemade house can be made from scrap materials.

You can make your own cages from metal profiles or wood. For rabbit breeding, the most popular enclosures are wooden. There may be external cages for rabbits, as well as for rabbits that will live in the house.

The most popular are bunk cages for rabbits. They can be used simultaneously to keep adults of different sexes. You can also keep young animals in the same house. This will help save space in the room.

Cage dimensions

To make a cage for rabbits with your own hands, you must first make a drawing. The dimensions of a rabbit cage depend on the weight of the animals and their number. The dimensions of the rabbit cage are 130 centimeters long, 70 centimeters wide and 40 centimeters long. A cage for a rabbit can be smaller in size. The cage for a decorative rabbit is usually shorter. Her average length can be 90 centimeters.

Usually, young animals are kept separately to fatten them. You can also build an enclosure to keep it. How many rabbits can you keep there at one time? You can keep about 10-15 individuals. To do this, you need to properly place feeders and drinkers inside. Make the cages simple and spacious so that the rabbits feel comfortable in them. Enclosures can be made from profiles or use metal mesh.

Construction from profile materials or mesh must be carried out correctly. To do this, first draw a diagram of a cage for decorative rabbits. The enclosure must have sufficient area so that the baby rabbit or older rabbits feel free inside. This will affect the health of the animals.

Rabbit cage Zolotukhina

How to make this type of rabbit cage? The process is quite simple. Housing of this design is considered the most inexpensive and compact today. This cage for rabbits is made on your own. There are step-by-step instructions for this.

You can create a cage for domestic rabbits at home using a drawing. The rabbit cage is located in a place where the sun's rays do not reach and there are no drafts. It should also be placed at a height of 70-80 cm from the ground. This will protect the enclosure from rodents and also make the cleaning process easier.

To save space, you can make cages for rabbits at home in several tiers. The structures can be placed on pipes or thick timber beams.

Material

An enclosure for a decorative rabbit with your own hands must be built with high quality. It must be environmentally friendly. Timbers, slats and boards made of wood are used for the construction. In addition you will need:

1. Net.
2. Screws.
3. Iron.
4. Hooks and stuff.

Tools

Building a rabbit cage involves using tools. To make cages for dwarf animals with your own hands, you will need:

1. Roulette.
2. Pliers.
3. Saw.
4. Hammer.

Other tools may also be required. Everything will depend on the material.

DIY outdoor cages for rabbits made of mesh

When all the materials have been purchased and the tools are prepared, you can begin to make enclosures for dwarf rabbits. What are they? You can make an aviary completely different designs. It all depends on the owner. For rabbits like giants, it is necessary to create spacious enclosures.

The construction of a rabbit cage begins with a frame. Then the floor is laid. It is constructed from boards or fine mesh. If the floor is made of wood, then small gaps should be left between the slats.

When the structure is placed in the yard, all walls will need to be insulated. Some breeders make interchangeable structures that can be installed depending on the time of year.

The walls are made of plywood. It is necessary to construct the structure so that the front wall is higher than the back. This will help to slope the roof so that precipitation does not accumulate there.

When the cage is placed indoors, the walls are made of mesh. But experts note that animals will be more comfortable in a closed and secluded enclosure. In front they make a place for a feeder and a watering hole.

The roof must be created with a slope. The first floor ball is made of plywood, and then slate or corrugated sheets are placed on top. But steel sheets not recommended for use. They heat up and freeze quickly. Experienced breeders make the top on hinges. This will help you open the lid and gain access to the inside of the enclosure, which will make cleaning easier.

Hut for fawning

In such a house, chambers for queen cells are usually placed on the side. The walls must be solid so that there is no draft. If the enclosure will be placed indoors, then you need to choose a place without ventilation. When the house is placed on the street, it must be insulated.

The queen cell should be made removable so that, if necessary, it can be moved to another enclosure. The camera must be kept dry at all times. It is necessary to periodically lay fresh hay in it. You should not use sawdust for bedding, as small parts of it can get into the rabbits' noses.

When the female brings babies in winter, then you need to put a heating pad with warm water. You can also use a regular incandescent lamp for heating. It must be on all the time. With such heating, you need to take care of fire safety.

Some breeders lay a cable from the “warm floor” system in the queen cell. The cable must be placed intact in the enclosure; there should be no solders on it. Using this method, you can regulate the temperature in the box yourself.

House for young animals

A cage for a domestic rabbit should accommodate from 10 to 20 animals at a time. The walls need to be made 30-40 cm high. The offspring can be kept there for up to 5 months. The cage should be raised from the floor surface by 70-80 centimeters.

You need to put a net on the floor to prevent kids from chewing on the wood. You can make the entire floor from mesh, but such a house will have to be placed in a warm room. With a mesh floor, the house will be constantly ventilated, and feces will not accumulate there, which will help protect animals from various diseases.

Hay can be used for insulation. The layer thickness should be from 15 to 20 millimeters. Artificial bedding will have a bad effect on the young animals, and therefore they may get sick. It's worth giving up.

Inside

Depending on the breed of rabbits, the contents of the house may vary. When young animals or rabbits are kept inside, queen cells and nest boxes must be installed there. Sometimes they make an exit from the cage into the enclosure. Feeders for branches or hay can also be constructed.

Drinking bowls

These animals require that they constantly have pure water in the enclosure. Therefore, the watering hole must be installed at a height of 4-5 centimeters from the floor so that dirt does not get there.

You also need to choose the right material for the drinking bowl. It should not be made of plastic, as rabbits will quickly chew through it. There is no need to install metal watering holes. Currently there is certain designs drinking bowls that will be safe for animals and provide them with clean water.

Feeders

This design must be planned at the stage of drawing up the design of the house. An important condition for constructing a feeder is its size and installation.

Completion of the arrangement

Everyone wants a home-made cage for decorative rabbits to last for a long time. But at the same time, experts note that wooden elements cannot be processed various compositions, as it may harm animals. To preserve the houses, their internal walls can be lined with metal sheets.

It is noted that in order for the cage for a dwarf rabbit to be comfortable for him in one case or another, adjustments can be made to the design. It must be remembered that for the average rabbit it is necessary to provide living space within 0.5 square meters.

Rabbit hutch, step-by-step construction (rabbit-hutch)

DIY rabbit cage!!! Part 4!!! Final assembly!!!Rabbit-hutch.

Smart cages for rabbits

DIY rabbit cage!!! Part 2!!! Frame of one of the tiers!!!Rabbit-hutch.

Building a rabbitry with your own hands

Outdoor cages for rabbits.

DIY rabbit cage!!! Part 3!!! Floor arrangement!!! Rabbit-hutch.

RABBIT CAGE or GARDEN CHICKEN COOP the story of one renovation

The most budget cage for a rabbit | GELENDZHIK RABBIT

DIY rabbit cages-2

Brovchenko family. Do-it-yourself rabbit cage (Mikhailov mini-farm). Material and sizes.

Technology for making cages from mesh

How to make a rabbit cage. Two-story penthouse runaway bunny

Makrol video tutorial: assembling a cage frame for rabbits (Part 1)

Do-it-yourself cage for rabbits made of profile and mesh 1 PART

DIY rabbit cages

Breeding rabbits when properly managed can bring good dividends.

Animal cages must be made of high quality materials. The normal functioning of the animal depends on compliance with these requirements.

The main advantage of rabbits is their unpretentiousness. They have a fairly high resistance to various diseases. A properly constructed home creates a comfortable existence for the animal.

Nursery construction

The correct drawings of cages for rabbits allow you to build a good home for the whole family.

The animal nursery consists of:

• frame;
• ceiling;
• side walls;
• central door;
• feeders.

How to make cages for rabbits with your own hands?

If the finished nursery is located on the street, then the height of the support should be 110 cm. High housing for rabbits helps protect animals from various predators.

The side walls are made of dense plywood or fine mesh. For feeding rabbits, it is recommended to use a fine mesh or thin slats.

The presence of holes allows you to get rid of food debris, thereby preventing their rapid spoilage.

The roof for the cages must be made of durable, waterproof material. Suitable for this: slate, roofing felt; polycarbonate

Materials for the production of housing should not contain sharp edges or chips.

Types of cells

Nursery designs have some differences among themselves.

Mainly:

• cells with queen cell;
• nursery using the technology of I. N. Mikhailov and N. I. Zolotukhin;
• a dwelling with an enclosure for walking animals.

The first version of the cage is a tall structure with two separate sections. One of them is used for feeding, and the other for the nest.

They are separated between a thick sheet of plywood. For normal movement of the animal, a manhole is provided.

An exit for animals is made in the side wall. The entire perimeter of the cage is fenced with a mesh. This helps prevent escape from the nursery area.

The sizes of cages for rabbits are calculated based on their number.

Note!

For intensive breeding of animals, the technique of combining neighboring nurseries is used. To do this, a corridor is made along the back of the cage with additional doors for the male to move around.

Industrial cell designs using Mikhailov technology

They are miniature farms. There is a nest for small rabbits, a place for feeding adult animals, additional ventilation. An additional compartment for waste disposal is made along the lower border.

How to make a similar cage for rabbits? To do this, you need to familiarize yourself with the design drawings. Shown in detail here exact dimensions walls and ceiling.

Nurseries using the Zolotukhin technique

Nurseries using the Zolotukhin technique are multi-storey departments that can accommodate several families. The design of the rabbit cage provides for additional compartments for feeding and easy cleaning of waste.

The main advantage of this method is to create conditions as close to natural as possible. Little rabbits acquire immunity to various viral diseases. The female independently arranges a warm nest from her down and dry straw.

Stages of cell creation

Do simple cell quite simple for animals.

Note!

To do this, you must follow a strict sequence of actions:

• The frame of the future cage is assembled from the beams. The thickness should be 10 cm in diameter;
• a blank wall is installed at the back of the nursery;
• The sides of the cage are covered with mesh.

For this it is necessary to use small fractions.

• Experienced experts recommend upholstering the side walls with small slats. This will protect the animal from overheating in the summer and freezing in the winter;
• The bottom of the nursery is made of a durable sheet of plywood;
• Feeders and additional doors are installed outside the cage. This allows you to easily remove bedding and debris from the animal.

The photo of the rabbit cage shows step by step instructions, which will facilitate the process of constructing a nursery.

Photos of do-it-yourself rabbit cages

Breeding and keeping pets involves a large degree of responsibility for the breeder and requires strict adherence to certain rules. One of the most important is the creation of acceptable living conditions for the animal. They should be close to natural.

Rabbits have a high degree of resistance to various diseases. They are unpretentious to food and living conditions, and reproduce easily. But despite all this, animals need a properly organized home.

The construction of a house for pets must be approached competently. This takes into account the number of animals, their sex composition and age.

What is needed for rabbit farming?

To practice at home, no special financial costs are required. It is necessary to have cages for animals, drinking bowls, and containers for food. All this is easy to do with your own hands.

Harvesting hay and branches can be done in the summer. Root vegetables and vegetables are easy to harvest from your own garden. The main expense item will be animal vaccination and the purchase of concentrated feed.

Each cage should house same-sex animals of approximately the same age, weight and character. It is recommended to place adult animals and females with rabbits in one- and two-section cages.

The sizes of rabbit cages have standard indicators:

• length - 100-120 cm;
• height - 50 cm;
• width - 70 cm.

For young rabbits, wooden cages covered with steel mesh. Their sizes correspond to the sizes of animals. For example, for 10 individuals, a cage with the same dimensions as indicated above will be acceptable, but its length should be 170 cm.

How to build a single-tier cage?

Many people are interested in how to make a rabbit cage with their own hands. Of course, if available necessary materials it's not that difficult. The article presents drawings of rabbit cages. Recommendations on the choice of materials for work are also given.

For the outside of the cage system, the most popular are double, single-tier rabbit cages.

The length of such cells is 220-240 cm, and the width is 65 cm. The height of the wall at the front is 35 cm. The roof should have one slope, equipped with a canopy protruding forward by 20 cm, and from the sides by 10 cm.

There are two compartments for food in the cage. The floor is made of metal mesh. The cell size should be 18x18 mm or 16x48 mm. The width of the mesh should be 2 cm, and the gap between them is 1.5-1.8 cm.

DIY rabbit cages with correct design must have a partition with a hole, the width of which is 17 cm and the height - 20 cm. It should be located between the nesting box and the feed compartment in order to prevent the young rabbits from entering the nest compartment into the feed compartment. The manhole is constructed at a height of 10-15 cm from the floor.

On the front side of the cage, two doors made of mesh are hung, which lead to the feeding compartment, as well as two solid doors made of boards, leading to the nesting compartment. Feeders with a removable structure and drinking bowls must be hung on the doors leading to the food.

For feeding with roughage, a nursery is installed between the compartments. They are based on two wooden frames on which a mesh is stretched. The size of the mesh cells should be 20x50 mm. The lower ends of the frames are aligned, and the upper ends are moved apart to the sides of the feed compartment. The result is a V-shaped crib for roughage.

What materials will be needed?

To build a single-tier cage for two individuals, the performer will need:

• Plywood with an area of ​​2 m2.
• Metal mesh with cell size 18x18 mm or welded mesh 16x48 mm (1.3 m2).
• Mesh with cells 35x35 cm or 24x48 cm (0.6 m2).

Making bunk cages

The cost of constructing a two-tier animal cage is not that high. This is due to the fact that the design is simple. In addition, the cash costs will pay off in the first months of use.

What materials will be needed?

To make a cage with two tiers you will need:

• Two wood fiber sheets.
• Bars measuring 60x100 mm (4 pcs.).
• Picket fence strips (50 pcs.).
• Ruberoid measuring 4x2 m for the construction of a pallet.
• Nails.
• Dye.

What equipment will be needed?

• Two deep bowls covered with enamel (their diameter should be 220 mm).
• Manure collection tank (approximately 300 mm high).
• Pair VPI-03 (also used household use immersed in water).
• Step-down transformers 220x127 V (4 pcs. per 8 cells).
• Five-liter polyethylene canisters (4 pcs.).

Cage design

Rabbit hutches should be positioned according to how the light will fall. The blank closed wall where the crates and feeders are located should face north. This protects animals from winds and cold.

The roof is constructed so that it overhangs 90 cm from the north, and 60 cm from the south. From the west and east, the roof should be level with the protruding beams.

Two-tier rabbit hutches contain a frame stand, a lower and an upper tier. You can also build a roof from the roof. As a rule, transparent or translucent material is used. You can also use roofing material.

The tier on top is a nursery, that is, it will serve as a place for raising rabbits after finishing feeding on mother's milk. This room is made of different cells. One of them must be larger than the frame.

The depositor is divided into two parts by means of a feeder for mixed feed, which has outlets on both sides. A common canister drinking bowl is also installed here. Each compartment should be equipped with a folding feeder for mixed feed and a nursery for fresh and dry grass. They look like an opening door. There is a door attached to the drinker.

The floor of the tier is horizontal. Its basis can be made of wooden slats, which are located at an angle of 45º so that small rabbits cannot injure their paws. All walls and doors of the cage are made of lattice. The exception is the north side.

Below is the uterine tier. It consists of two compartments: nesting and walking. It may also include the same components that are present in the upper tier.

The nest compartment has a removable floor. It is located below the rest of the tiered area. The queen cell will be placed in this compartment. Before the rabbit brings the babies, she will instinctively sneak into it herself.

The rest of the nest should be stationary. It is equipped with a wall with a hole that is closed with a valve. It is better to equip the door to the nest with hinges from below, so that open state it served as a platform for the animal.

The walking compartment is equipped with a floor made of slats located perpendicularly. This ensures structural rigidity. In the walking area there is a canister drinker, a folding feeder and a bunker feeder for mixed feed. Nursery on the stand at the back of the paddock. A door must also be installed for the automatic drinker.

A window is constructed in the floor of the walking compartment at the end of the conical shaft, which is attached under the floor of the upper tier. The pitched shaft communicates with a bunker equipped with a removable door and a container for manure. Thus, rabbit cages will be cleaned due to special doors, which will also make feed containers accessible. The containers themselves are located under the inclined nets of the feeders.

At the bottom of the cage frame there is a compartment electrical equipment. At the same time, this place serves as a nursery for rabbits. It must be locked. For convenient loading of the feeders, you need to build it folding outward.

The design of the feeder for mixed feed has a body with windows for rabbits, as well as a tray. It is constructed from a mesh with small cells.

All folding components must be equipped with handles, hinges and latches, as well as, if necessary, mortise locks.

The side and front walls are tightened with a fine mesh, the working side can be covered with a mesh with large cells.

Mini-farm from two-tier cages

To build a small farm based on bunk cells you don't need a lot of space. One cell occupies 1.4 m2. If you build a farm of two rows and use eight cells with an opening between them of 70 cm (measured along the legs) and a passage of 110 cm, then the area of ​​the farm will be equal to 25 m2.

Each cage houses up to 25 rabbits at a time. In the lower part there will be a female rabbit with a new offspring, and in the upper part - the previous offspring.

Double-tier cages have been used on experimental farms for a number of years and have proven to be highly cost-effective and profitable. So their use is recommended for all farmers.

Making a family unit - cages of three sections

Making rabbit cages of this design with your own hands is a more difficult task. But such family blocks very convenient for breeding animals. The central part is inhabited by a male, and on the sides there are female rabbits.

The wooden partitions between the cell compartments are equipped with manholes with plywood latches. They are designed to easily attach females to males and return them back to their compartment.

What materials are a cell made of?

The basis of the frame can be bars. The walls on the sides, the compartment for the nest with doors and partitions are constructed from clapboard.

A metal mesh is used for the front wall. The nesting compartments have an attic part - this is the free space between the ceiling and common roof, where female rabbits can rest.

An additional convenience is that the location of the feeders and drinkers is designed in such a way that they are not subject to contamination and can be filled from the outside.

Cages for rabbits designed by breeder N. I. Zolotukhin

The famous rabbit breeder N.I. Zolotukhin has been breeding these cute animals for several decades. Such a wealth of experience helped him design a new cage for rabbits.

Features of breeder cages

• The floor in them is solid. Its base is slate or boards.
• There are no pallets in the cages.
• A narrow strip of mesh flooring is located only along the rear walls of the structure.
• The back walls are installed at an angle so that rabbit waste from the tiers located above does not fall on the rabbits located in the lower tiers.
• There are no special queen cells. The female rabbit builds her own nest before giving birth.
• Grain feeders are attached to the doors and are turned outward for filling.

A diagram of the rabbitry is presented below.

How to make cages for dwarf rabbits with your own hands?

If you want to have houses, their cages are constructed in a different way. Pet stores offer many different models. But you don't have to buy them. Cage for pet You can do it yourself and it won't take much time.

The structure consists of two walls on the sides, the size of which is 70x70 cm. Back wall it is attached in such a way that there is a gap under the cell. The height of the back wall is 55 cm, length - 100 cm.

Meter-long slats are nailed to the bottom of the cage. A metal mesh is fixed on top of them.

The cage lid is made of mesh with hinges. It is equipped with a handle. A tray is installed under the cage.

How to choose a grid?

When making rabbit hutches, of course, you will need a mesh. In order for the manufacturer to better understand which mesh choice will be optimal, we recommend using a number of tips.

Many people wonder: is galvanized mesh, steel or aluminum material suitable? It's better to opt for steel structure, as it is durable.

To make a cage made of wood with mesh doors and a floor, you should choose the mesh carefully so that it does not injure the animals' paws. Experienced breeders advise using it with small cells. The material used is metal. The mesh thickness is 2 mm, and the cell size is 16x48 mm. A galvanized mesh is suitable for constructing the side walls of the cage.

Any type of mesh is used to construct the door. It does not have to be welded. Wicker can also be used.

During the warm season, animals can be kept in an enclosure fenced with a mesh. A wicker structure with a thickness of 1.2 mm is suitable for it.

If for large animals it is enough to build a regular barn, then for breeding rabbits you need to take care special conditions. The best solution In terms of price-quality ratio, it will be possible to make an animal house with your own hands. It's cheap and also allows you to take everything into account peculiarities breeding and location. In this article we will look at what material needs to be used for this purpose, what is worth taking into account, and we will analyze the drawings.

Selection of necessary materials

The material is selected based on the type of cell. Any structure has a frame, floor, walls, door and ceiling. For building rabbit hutches houses Metal mesh and wood are most often used. The cell of this mesh should have a diameter of no more than 2 by 2 cm and no less than 16 by 47 mm (this depends on the age and weight of the animal).

The materials for building the cage are:

• plywood sheets;
• bars;
• slate;
• nails and screws;
• slats;
• mesh with cells;
• for door bolts and curtains;
• drinking bowls and feeders.

The wood is sanded and sanded, and the ends of the mesh are securely fastened. Sharp edges must be removed to prevent injury to animals, and protruding wooden parts are covered with tin. Rabbits love it very much gnaw wood - this is how they grind their teeth. To do this, you need to put twigs in their feeder. The roof and walls are made of plywood and mesh, and the main frame will be wooden blocks. Their size will depend on the location of the structure: if the cage will be placed on the street, then the legs of the frame should be from 80 cm, and when installed indoors - 35-40 cm.

If the structure will stand in an open space, then it is necessary to roofing materials. Don't do it metal roof (for example, from a metal profile), because it will heat up in hot weather, which can lead to heat stroke in animals.

Standard design parameters

First of all, you need to decide on the size of the rabbit cage according to the drawings. Design drawings can be found on the Internet or made yourself. 2-seater designs with 2 separate sections are common. There are also other types: single-section, 3-section, group for young rabbits, for the mother house, author's designs from various farmers.

Standard dimensions of the structure: height - from 40 to 50 cm, length - from 120 to 140 cm and width - from 70 to 80 cm.

For young individuals, a length of about 90 cm is enough, and other parameters are similar to the previous design. For one adult rabbit, 0.7 square meters is allocated. m of area, and for young individuals - 0.2 sq. m.

Types of do-it-yourself houses

The types of cages for rabbits are quite varied:

• for adults;
• for young animals;
• for a rabbit with babies;
• for giants;
• solid wire;
• from farmer Zolotukhin;
• from farmer Tsvetkov;
• Rabbitax.

Rabbits with their offspring are kept together, and separate housing is built for older individuals.

For adults

For medium-sized adults, housing can be built about 70 cm wide, 50 to 70 cm high and 140 cm long using a block structure. Each block is divided by a grid into 2 sections. The partition is removed during the mating period, which allows 2 sections to be combined into 1.

It’s not that difficult to build a standard 2-story house for adult rabbits. The main thing is to draw up the drawings correctly. You can build a two-tier or three-tier cage. It will be more difficult, but it will allow save space in the territory.

Each cell must have separate place for sleeping, walking and eating the animal. The cage is divided by a plywood partition. The sleeping compartment must have a continuous wooden door, and the place for walking and eating is mesh. The resting place should be small. Ideal sizes It is considered 30 by 60 by 50 cm.

Separate for young animals

Rabbits that have been weaned from their mother are kept in groups. The cell is made according to minimum sizes: the total area of ​​the structure is 300 by 100 cm, the ceiling height is 50−60 cm. It is better to make the floor from thin wooden slats and also cover them metal mesh(thickness 1.5 mm, cell diameter 15 by 40 mm). You can make the entire floor mesh, but additionally equip a warm separate room, which in winter period insulated with straw and hay.

There are farmers who do not make a separate house for the young animals, but simply house them in cages intended for adults. But at the same time, you need to calculate how many animals can be placed in one cage in order to provide them comfortable accommodation.

For a female rabbit with offspring

In an open area, fenced only with a net, the female will be anxious and nervous. And this will have a bad effect on the health of the offspring. In a house for a female rabbit with her offspring prerequisite is the presence of a closed and warm place for the nest, space for walking with a front mesh wall.

Let's consider the simplest and most functional version of a house for a female rabbit with offspring.

The frame is made from the bars. The back wall and two side walls are made of plywood. The cage is divided into 2 sections: for walking (large) and for nesting (small). Separate doors are made for each section (from mesh and solid wood). The walls, ceiling and floor should be made according to the sandwich principle (double). Straw or foam is laid between them. The roof is covered with slate.

For giant individuals

Designs for these individuals must be much larger than usual. Adult rabbits can grow up to 60 cm in length and reach 7.5 kg.

Minimum house sizes for one individual:

• height from 55 cm;
• width - 75 cm;
• length - 0.9−1.5 m.

If possible, it is better to increase housing parameters.

For young individuals, a group cage is built, the height of which is 40-50 cm, and the area is about 1.2 square meters. m. They reinforce the floor quite well (they are made of thicker galvanized mesh), since the weight of the animal is rather large. To prevent the floor of the house from sagging, they make sheathing from timber at a distance of three to four centimeters from each other.

Some rabbit breeders put a solid wooden floor in their cages, and plastic trays are installed underneath it. It is necessary to clean such a cage at least twice a day.

All-wire housing

This cage is the most budget-friendly way to make housing for rabbits. It can be installed outdoors and indoors. Such cages are durable and lightweight, take up little space, and are easy to clean and maintain. To make such housing, you will need 2 types of mesh: a large one for the ceiling and walls (2.5 by 5 cm in diameter), and a smaller one for the floor (1.5 by 5 cm in diameter). The frame of the house is made of timber (legs length 50-70 cm). IN winter time The cage is placed in a warm barn, and in the summer - on the street.

From farmer Zolotukhin

Rabbit breeder Zolotukhin has developed a simple, original and inexpensive design for rabbits. In such houses there is no need to clean every day; animals feel comfortable in them and are less susceptible to disease.

Zolotukhin's cell is a 3-story building, with a sloping plywood or slate floor. The mesh on the floor is laid only a short distance from the back wall and without a tray. The next tier is shifted compared to the first by the width of the grid. The third one is located in the same way. The front wall is common to all floors forming a slope. The compartments are equipped with tilting feeders.

For construction you will need: metal mesh, wood, tin, straight sheet slate or plywood, polycarbonate. A wooden frame, doors and partitions are made in advance. The mesh is used to make the cage door and the back of the floor, which is made of plywood or slate, and the back wall is made of polycarbonate. The protruding parts inside the cage are covered with tin.

• height is 150 cm;
• depth 70−80 cm;
• width 200 cm;
• the slope of the floor is 6−8 cm;
• door 40 by 40 cm;
• the mesh size in front of the back wall is from 15 to 20 cm.

The floors are divided into 2 sections by a partition, and a place is left between them for a hay barn.

From rabbit breeder Tsvetkov

Farmer Tsvetkov presented the idea of ​​a 2-story mini-farm for rabbits. It consists of 4 separate sections. Features of these cages: 2 gravity feeders, 2 hanging queen cells, unusual ventilation and manure removal systems.

The frame is made of coniferous timber and painted white. The sennik is made of moisture-resistant plywood, 8 mm thick. The inside is lined with metal mesh, and it also serves as a door in each section.

Wooden parts need to be sheathed sheet metal, cover the cone for collecting manure with slate mastic. Ruberoid or slate is suitable for the roof. The water in the drinking bowls will be heated by a boiler.

Rabbitax Dormitory

Such cells can be of various modifications and designs. The simplest of them are 2-section. There are ecological models that are based on the principle of changing air flows.

There are real farms for Rabbits rabbits, where more than 25 animals live and breed together. Many types of such cells are sold. But you can also build them yourself. The basis is the drawings of the rabbit breeder Mikhailov.

Sometimes a drywall profile is used to build cages. This profile is used to either make a frame or use it as a feeder.

To summarize, we can say that it is not necessary to spend a lot of money on building a house for rabbits. After all, the construction is not very complicated. Every craftsman can create comfortable living conditions for animals.

Attention, TODAY only!