When choosing an entrance door for an office, many businessmen think, first of all, about the image component of such a purchase. Any office entrance door is unique business card organizations or enterprises. Based on impressions of its appearance, clients form a primary opinion about the reliability, solidity and stability of the company. However, on one appearance The list of requirements for modern office doors does not end there. What other serious characteristics should office doors have?

Characteristics of Torex office doors

The main requirement for office entrance doors – high level of security. An office is not only a place to meet clients and partners. First of all, this is a room where important documentation and expensive office equipment are stored. Therefore, a reliable and safe entrance door must be installed in the office. Doors Torex are made from the best varieties steel, it is quite difficult to break them by any possible force. In addition, they also have other qualities of real office door:

From attempts at intellectual penetration into office space Reliable protection will be provided by Blockido locks that meet the requirements of the 4th (highest) burglary resistance class.

No less important parameter is the durability of the door. Office doors Torex are designed for constant intense load, so they will last a long time without settling or jamming.

Perhaps one of the main safety criteria in an office is fire safety. We recommend paying attention to fire doors manufactured by Torex. Special design fire barriers are able to maintain the tightness of the room for a long time thanks to a special three-layer seal contour and the design of the canvas and the box.

In addition to other useful options, they are equipped with a special “anti-panic” system (key on the handle), which allows you to quickly leave the room if necessary. In addition, Torex fireproof office doors are capable of maintaining bearing capacity and prevent the spread of fire. Torex fireproof office doors use materials with the best insulating characteristics - mineral basalt fiber board high density, special seals, threshold from of stainless steel. These qualities fire doors are especially important for office premises where there may be a large number of of people.

"Technical regulations on requirements fire safety"(Federal Law of the Russian Federation dated July 22, 2008 No. 123-FZ) determines the need to install fire doors for many buildings: from government institutions to commercial buildings and residential buildings.

Very often office doors contact directly with the street, so their design must include materials that provide the proper level of heat and noise insulation. An office entrance door can be covered with decorative protective panels, providing reliable protection from external negative impacts. With all its rigor and respectability entrance doors for the office they can look attractive and original.

When choosing metal office entrance doors, first of all you should pay attention to their practicality and reliability. Our company offers its manufacturing services durable structures with protective characteristics. When placing an order on the website, you can choose any design option and product sizes.

Prices for entrance doors to office premises

The optimal ratio of quality and price for metal office entrance doors from the manufacturer is our important advantage. You have the opportunity to purchase affordable products that have the following characteristics:

• Reliable protection against unauthorized entry into the premises. Office doors with burglary resistance classes 3 and 4 and innovation systems locks will allow you not to worry about the risk of robbery. In addition, the reinforced frame and canvas perfectly withstand constant opening, closing, and slamming for many years.
• Excellent sound insulation. Multi-layer door cavity filling special materials allows you to protect workroom from annoying external noise. Employees will no longer be distracted and will be able to calmly concentrate on their duties.
• Protection from smoke and fire. If you wish, you can order designs from us that are designed to withstand open flames. Take care of the safety of your workspace today!

A custom-made metal entrance door to an office space can have a completely different prices. Prices are influenced not only performance characteristics and product dimensions, but also decorative design. As a rule, customers prefer laconic solid structures with practical coating. If financial opportunities allow you to choose a more expensive product, consider purchasing doors with solid wood panels, decorated with carvings, models with extravagant artistic forging and inspiring glass inserts and stained glass windows. Such products will emphasize the solidity of your company in the eyes of visitors and potential business partners.

Our company strives to meet all customer expectations, therefore we use European equipment and high-quality environmentally friendly materials. If you want to buy an office entrance door in Moscow, contact a consultant or calculate approximate cost making a structure using an online calculator. The manager will be happy to offer you different variants products in the price category of interest.

Remember that a metal entrance door to an office building requires proper installation. You can entrust the solution to this problem to a competent employee of our company, who will complete the installation in less than 1 hour.

When choosing a door, the customer also decides on its configuration. The complete set of metal doors is divided into regular, that is, standard, which is initially provided for in the price list, and additional (which the client can order in addition to the door, for an additional cost).

The usual configuration of metal doors involves

• door frame;
• door leaf;
• one or more stiffeners (depending on the type of door);

Additional equipment can be agreed with the client, it may include:

• closer;
• main and additional locks;
• decoration;
• door knob.

Thus, when purchasing a metal door, it is necessary to proceed from what functionality it will carry. And based on this, determine it technical indicators and appearance.

Rules for choosing entrance doors for an office

• If you need to install external entrance doors to the office from the street side, then the best option - metal models, since plastic and wooden ones do not provide reliable protection from the entry of strangers.
• Rich external finishing doors are acceptable if the office is under 24-hour security, for example, on the territory of an office center.
• The door design must correspond to the company’s field of activity and the interior of the premises.
• It is recommended to install doors with double-glazed windows in the presence of a hall, reception area or spacious corridor. If there is a narrow passage behind the door, then it is better to install blind doors.
• In a wide opening it is advisable to install a one-and-a-half-leaf or double door, since one wide leaf takes up a lot of space around the door and, when constantly opened, puts a significant load on the hinges.

Available in rare stores wide choose office doors, since, according to sellers, they are usually made to order. But this is not true: the Medver company offers office entrance doors that are completely ready for installation with installation at the manufacturer’s price.

Office doors from the Medver company

Office doors are stored in the warehouse of the Medver plant as standard. If necessary, you can replace the fittings, strengthen the layer of heat and sound insulation, change the dimensions of the sashes and modify the design of the basic model.

To emphasize the solidity of the company, doors from the “Business”, “Prestige” and “Elite” categories are chosen for offices. Among the top sellers are oak and panel doors. For big ones doorways order high doors with side and top transoms.

How we make our doors

Free door installation - every client MEDVER!

Metal doors to the office– security guarantee high level security, thereby reducing or completely eliminating the likelihood of hacking and subsequent illegal entry.

Offices, like any premises, also need the necessary level of security, regardless of their field of activity. Quality and reliability door designs– the main thing that interests the customer, since the office can store securities, documents and money.

The Service-Stal plant produces iron doors to the office any sizes and configurations. High quality of manufactured products is achieved by using high-precision metal and woodworking equipment, as well as a responsible approach of specialists to any given task.

A wide range of finishing options allows our customers order steel doors to the office various layouts and designs. This makes it possible to create unique door designs that can satisfy the requirements of the most demanding customers.

Buy metal doors for the office- means to fully secure the premises from penetration and burglary, that is, to preserve all existing property and information.

Why you need to cooperate with us

Service-Stal provides the opportunity order office doors at profitable and affordable price offers. In addition, a 10-year operational guarantee is provided for the entire period of use. Any client who contacts us receives the following:

• Confidence in the safety of purchased products at any stage of transportation;
• Delivery is carried out within the previously agreed terms, regardless of the buyer’s location;
• Special approach to each client;
• High-quality services related to the installation of doors - dismantling old structures, widening/narrowing the opening, sealing seams with foam, garbage removal, lifting to the floor, installing platbands, etc.;
• Low prices – a well-thought-out cost formation system;
• Fast and qualified assistance from consultants if questions or other problems arise related to our services or manufactured products;
• Free visit of a surveyor to the specified address.

Important! You can order iron entrance office doors at any time convenient for you - to do this, you need to call our employee and discuss all the details and points, as well as provide him with the dimensions of the future structure.

Advantages of office doors from Service-Stal

• A huge selection of materials for finishing - MDF, vinyl artificial leather, glass elements, powder coating, forged elements, natural wood, photo printing, etc.;
• The use of environmentally friendly raw materials/materials, as well as the use of high-quality components (locks, handles, eyes, hinges) - all our products are absolutely safe for human health;
• Reliability and long service life;
• Possibility to add existing design office space;

It is worth noting that our employees constantly analyze the market entrance doors for offices, thereby providing our constructors and designers with the required information for the further production of door structures that fully meet all people’s needs regarding safety and reliability.

How to purchase

Buy steel entrance doors to the office in Moscow you can contact us low prices With free shipping along the Moscow Ring Road, as well as throughout the Russian Federation, despite the remoteness of the client. You can find out all the required information on the website or from our consultant.