A profile pipe is a pipe made of carbon or low-alloy steel with a cross-section other than round: rectangular, oval, diamond-shaped or square. Such pipes are widely used in industrial and private construction (frames of small buildings and kiosks, carports, garden gazebos and a swing, fence, gate or bench made of profile pipe). This article provides a description of how to make a simple bench from a pipe without a back and with a back.

The difference between profile pipes and pipes with a round cross-section is their increased resistance to physical activity. Furniture made from steel pipes is usually not exposed to excessive loads, and therefore thin-walled pipes with a thickness of 1-4 mm are used for its manufacture. Such pipes are easy to work with, they are inexpensive, and the resulting structure is light in weight. As for the thickness of the pipe, it directly depends on the functionality future design and the expected load on it. So, when making for adults, the thickness of the pipe will be at least 2 mm, and when making a bench, 1-2 mm in thickness is sufficient. To make furniture, pipes with a cross section of 40x25 mm or 20x20 mm are taken.

It is quite difficult to make an elaborate and complex bench without the appropriate experience, but a bench of a laconic design can be done even by those who have never had experience working with a welding machine or a bending device.

What is needed to make a bench

Regardless of which particular bench model will be made, the following materials and tools will be required:

1. profile pipe of the required diameter,
2. boards for making a seat,
3. welding machine and electrodes (diameter 3 mm),
4. grinder or hacksaw for metal,
5. file, drill with polishing attachment or grinder,
6. building level,
7. meter and square,
8. plane (if the boards are not planed),
9. anti-corrosion paint,
10. wood paint or stain,
11. round head bolts and nuts,
12. hammer, drill and pliers.

Benches made from profile pipes can be decorated with bent elements. To do this, you will need a device designed for bending pipes. In this capacity, a “Snail” mini-machine, a bench vice, or a bending tool made from old brake discs for a car are usually used.

To ensure that the bending of paired parts is identical, a plaza is used, made from a piece of plywood with the outline of the future part applied to it. To obtain smooth and graceful curves, you may also need blowtorch- with its help, the bend points are heated.

Before flexible pipe are densely filled with sand, so its availability should be taken care of in advance. The bending procedure is simple: sand-filled pipes are placed on the machine between the stop and the central protrusion, and then bent under the right angle hands. Below is a drawing of a pipe being bent on a machine made from a car wheel.

For the manufacture of bent parts, preference should be given to round or oval pipes - they are easier to bend.

How to make a bench without a back

A bench without a back is a structure of supports in the form of three metal rectangles connected to each other by two pipes forming a seat. Below is a drawing of a bench made from a profile pipe.

Bench details

To make such a bench you will need a square or rectangular profile pipe with a cross section of 30x30 mm. A total of 11 meters of pipe are needed, from which blanks are cut using a grinder or a hacksaw:

• 2 pieces of 2.3 meters each (long parts of the seat, fastening the supports);
• 6 sections of 0.6 meters each (long parts of rectangular supports);
• 6 sections of 0.45 meters each (short parts of the rectangular supports).

From wooden boards, you should prepare 8 rectangular wooden blocks, each 6 cm wide. To connect the wooden bars with a metal frame, you will need bolts and nuts (24 pieces).

Fastening bolts should be selected with a rounded, flattened head that does not leave defects on clothing. Alternatively, the bolts can be recessed into wooden canvas, however, this makes the wood more vulnerable to moisture in the fastening areas.

Sequencing

This bench made from a pipe is quite simple to assemble with your own hands: first you need to weld 3 metal rectangles, and then connect them with two guides that form the seat frame. It should be remembered that:

1. Long sections of rectangular supports will be placed horizontally, and short sections - vertically.
2. When welding sections, the angles of the supports should be controlled: they should be 90 degrees.
3. The length of the bench, as well as the width, can be changed. If the length of the bench increases, the number of supports will need to be increased.
4. After welding the supports, all seams on them are cleaned using a grinder or file, and then primed.
5. After connection metal supports, 8 holes are drilled symmetrically on each of them for attaching wooden boards.
6. The frame of the bench is covered anti-corrosion paint.
7. Wooden boards for seats are pre-varnished or impregnated with stain.
8. The boards are attached to the frame last.

Wooden slats for the seat can be replaced with rectangular profile pipes. In this case, they are simply welded to the frame, and then the entire structure is covered with paint.

For aesthetic purposes, iron slats can be placed in a metal frame, which will hide the sharp end parts. This will require an additional 1.2 meters of pipe. Such a bench can be placed autonomously - in a park or in a garden, but in rainy weather it is recommended to cover it with film or place it under.

Pipes made of duralumin cannot be welded. Such pipes are connected by bolting.

How to make a bench with a back

A bench made of a profile pipe with a back will require more time and materials, but these are the models of this garden furniture that are more convenient and loved by vacationers. Below is a drawing of a bench made of a profile pipe with a back.

Bench details

To make such a bench, you will need 8 meters of profile pipe with a cross-section of 25x25 mm, as well as boards for the seat (30 mm thick) and backrest (25 mm thick). Frame parts should be prepared from metal pipes:

• 1 piece 1550 mm (crossbar between supports);
• 2 bent sections with a span of 100 mm and a height of 780 mm (for the back and rear of the supports);
• 2 pieces of 350 mm each (for the base of the seat);
• 2 pieces of 390 mm each (for the front part of the supports);
• 2 pieces of 200 mm each (to strengthen the front supports);
• 4 metal plates 40x40 mm (for a stand on supports);
• 2 bent metal strips 450 mm (for connecting supports on each side).

To create a seat, you also need to prepare boards of the required length:

• 3 boards 1600 mm long, 60 mm wide and 30 mm thick (for the bottom of the seat);
• 3 boards 1600 mm long, 60 mm wide and 25 mm thick (for the back).

To connect the frame to the wooden boards, you will also need 24 round-head bolts and nuts.

Sequencing

After all the details of the future bench are prepared, all that remains is to connect them. You should start with the seat frame:

1. First of all, the crossbar and two 350 mm sections are connected to each other. The crossbar should be located exactly in the middle of each segment and perpendicular to them.
2. Next, 2 bent sections of 780 mm each are welded to the resulting structure. The place of welding is at the bend of the pipe.
3. On next stage The front parts of the supports are welded to the frame. In this case, the junction of the front supports with the base of the seat is 9 cm from their front part.
4. The front supports are connected to the crossbar by pipes - for the strength of the bench.
5. The frame is almost ready. All that remains is to weld two arcs between the supports and linings on the ends of the legs (supports).
6. The resulting structure should be sanded (welded areas), primed and painted with anti-corrosion paint. At this stage, a garden bench made from a profile pipe should look like the one shown in the figure below.

After this, all that remains is to symmetrically place the boards for the seat on this frame. The boards should be treated with a plane and coated with varnish or stain in advance. Thicker boards go to the bottom of the seat, and thinner ones go to the back. Fastening is carried out using two bolts on each side of the board. Below is what it will look like in finished form DIY bench made from a pipe.

If desired, the boards can be coated with colored paint or replaced with metal ones. rectangular pipes. We also recommend that you watch the video instructions on how to make a simple bench from a profile pipe with your own hands.

Making a bench for your garden with your own hands is a simple and exciting process. You just need to get creative and stock up on the necessary tools.

Model selection

The owner must make the bench for the dacha himself. It’s good to involve your son in this process. Using this example, he will gain an understanding of working with metal and wood.

Similar articles :

From the many models of benches, it is better to choose one that does not involve the use of a welding machine. And there are several reasons for this:

1. Not every master has the unit;
2. welding requires certain skills;
3. Connecting power to the device is not always possible.

We invite you to pay attention to simple model benches without backrest made of square profile pipe. Manufacturing will require one and a half to two hours and publicly available tools. And what is important is that even an untrained person can do such work without a drawing.

Required materials and tools

Despite the fact that the profile pipe is quite strong, for ease of work it is necessary to purchase material with a wall thickness of 3-4 mm. So, for the shop you will need:

Below are explanations of the list.

A profile pipe is needed with a width of 40 mm and must have rectangular edges. When purchasing, ask to cut the lashes to the required length. A countersink is needed to prepare seats for screws with countersunk heads, but you can do without it if you choose a chamfer with a larger diameter drill. You just have to work with it very carefully. In the absence of stain, use strong solution potassium permanganate.

Preparation of supports

The length of the future bench is 2 m, height is 45 cm. First, 3 supports are made. To do this, sections from the profile pipe are marked and cut. The drawing below will help you do this correctly.

Scheme for marking cuts on a profile pipe

Please note that angles A and A 1 are right angles; A 0 and A 2 – 45⁰, the distance between the tops A – 45 cm. Carefully maintain all dimensions.

To mark such corners it is convenient to use a miter box.

The marked corrugated pipe is cut using a grinder. The cutting line runs along three sides of the pipe.

When working with power tools, follow safety precautions! Be especially careful not to touch the fourth edge of the future support.

You can bend the prepared profile pipe with your hands if you stand on one segment. If necessary, tap with a hammer.

Thematic material:

Three ready-made supports for the bench are squares with a side of 45 cm.

The next step is to connect the supports into one bundle using corners. This is done in the place where the different ends of the professional pipe are connected. Paired holes Ø 5 mm are drilled in each corner shelf. The first and third pairs are at a distance of 20 mm from the edge of the corner, and the second is strictly in the middle. In this way, 2 corners are prepared.

Having placed the bench supports against them, they mark places in the corrugated pipe through the holes. Then, using the same drill, holes are made in each support. Now the elements are connected using self-tapping screws.

The resulting structure is not strong enough, so handle it carefully.

Board processing

Depending on the quality of the raw materials, lumber is prepared. First, round the corners using sandpaper. You just need to carry out this stage without fanaticism, the rounding radius is 1-2 mm. The amount of rounding is not measured with a special tool, but simply checked by hand by touch.

We cover wooden boards stain

The next point is stain treatment. This is a more decorative part than a functional one. This operation will highlight the structure of the tree. If there is no stain, potassium permanganate will do.

Before processing wood, check the strength of the solution on the back or end side of the board. Such a concentration is necessary so that the wood darkens, but does not turn black.

If, after covering with stain, the wood has become too dark color, then the surface of the boards is lightly sanded with fine sandpaper.

In every wooden element benches drill three holes with a diameter of 6 mm. To make the holes for the bolts symmetrical, place the boards in a stack, one on top of the other.

The first and third holes are located 2 cm from the edge, and the second is strictly in the middle. To control, place the boards on the frame of the future bench and check the accuracy of the markings.

The finished holes are countersunk. The depth is selected in such a way that the countersunk heads of the bolts are flush in them.

Bench assembly

The drilled boards are laid on the frame and holes for bolts are marked through the holes. To drill pipes, use a metal drill with a diameter of 6 mm. Make sure that the drill goes down strictly vertically.

Now the crucial moment has come. Before assembling the benches, the structure is completely painted. If you do this after installation, there will be untreated areas left. And the quality of protection is determined by the weakest link.

Ready-made bench option

The metal frame is covered with kuzbasslak, drying time is 24 hours at a temperature of 20 ⁰C. Pipe bends are treated especially carefully.

But the boards are coated with diluted varnish in 4 layers. The peculiarity of this stage is that the diluted product penetrates deeper into the thickness of the wood, therefore it holds tighter and protects better.

Dilute the varnish with solvent 646, approximately 30-40% by volume. Treat the wood with a brush or foam swab. The diluted product sets quickly enough, so you need to work at a pace. Allow the boards to dry for an hour between coats. After the fourth and final staining, the products are left to dry for a day.

More complex design due to openwork elements

The next day, each screw is installed and tightened, and the components of the structure are assembled into a single whole. The results of the work turned out to be simple and reliable bench 2 m long, 45 cm wide and high.

Finishing touches

Before installing a bench in the yard, it is recommended to additionally treat the bends to prevent possible water from getting inside the pipes. To do this, using a foam rubber swab, apply a thick layer of Kuzbasslak to the indicated areas.

Are you going to decorate your dacha or simply improve the place on backyard, then it is definitely necessary to make a convenient and a sturdy bench, which will serve faithfully for many years. To prevent the process from seeming boring and tedious, it is better to get down to business with the whole family, this will bring everyone together common cause, will unite you and give invaluable experience to the younger generation. In this article we will tell you what material is best to make garden benches, we will share our experience and give useful advice.

How to make a garden bench from a profile pipe with your own hands: step-by-step guide

You are ready to start working and are already looking for materials, which means you can start. But before making a bench, you need to choose the right material. Now there is a huge choice for this. We recommend choosing a professional pipe. They are different shapes and sizes, which will allow you to make the product the way you want, of any size and format. Why profile pipe? The fact is that it has a number of advantages:

1. The carbon steel from which they are made is durable and easy to process.
2. Ease of welding parts if it is necessary to make changes to the design of the bench.
3. The material is lightweight, which makes it easy to carry it from place to place.
4. The optimal price is perhaps the most favorable.

Well, the material has been chosen, but first you still need to draw up a plan and drawing of the future product according to which you will make the bench. There is nothing complicated here either, just take the basic dimensions, turn on your imagination and imagine in your head what you want to get as a result. It is at this stage main role plays with imagination and personal wishes. While the bench is under development, you can modify and design it as you wish.

Drawings of benches for a summer house from a profile pipe

If you already have experience in this area, then you can probably choose required dimensions. Since benches are often selected according to the customer’s personal preferences, only you can choose the most convenient combination of sizes to create a comfortable and convenient bench. In this article, we propose a general plan for most standard country benches, without taking into account the peculiarities of a person’s build. These benches are suitable for almost everyone; they are designed for average body proportions.

Step-by-step creation of a drawing:

• The supporting part of the bench should be in the range from 40 to 60 cm.
• It is better to make the backrest up to 0.5 meters higher than the seat.
• The seat must be raised above the level of the lower supports from the ground by 40–50 cm.

These parameters are optimal and provide convenient and comfortable stay to those who sit on it. Taking these parameters, draw out the bench blank on graph paper. For convenience, we recommend making drawings in three planes. This will allow you to evaluate and present all the advantages and disadvantages of the future product.

What you need to create a bench from a profile

Let's discuss a list of what needs to be prepared in advance before starting work. In addition to the basic material, you will need some tools, which are better to immediately find and prepare for work. Among them:

• main material (profile metal pipe and wooden boards);
• hammer;
• Bulgarian;
• drill with drills for wood and metal of different diameters;
• metal corners for connecting parts together and creating a frame;
• tape measure and other tools as needed.

TIP: stock up on boards and profile pipes; it happens that an error in calculations or inattention leads to incorrect cutting of the material and, as a result, its shortage.

Preparing the components of the bench

The main components of a traditional bench: support, seat, back. In accordance with this, it is necessary to prepare all the necessary preparations and materials. You can do this in two ways:

• Make the component parts and then connect them.
• Prepare all parts separately and begin assembly.

The second method looks like this:

• Prepare boards of the same size, polish and sand them if necessary so that they become smooth and can be varnished in the future.
• Cut pipes different sizes for support and backrest.
• Make corners on the pipes, which we will then connect.

Assembly diagram for a garden bench from a profile

The materials and tools have been selected, all the blanks have been made, we begin assembly. The general build plan is as follows:

1. The metal supports are pre-connected into a frame. It is easier and more convenient to use a right angle for this.
2. Weld the parts together.
3. Attach the legs to the base, also securing them with welding. The bottom of the bench is ready. For the back, attach a longer pipe to the back of the bench, the upper part of which will serve as the back.
4. Clean the parts where the parts are welded.
5. Prepare the wooden boards according to the drawing plan.
6. Make holes with a drill in the designated areas for attaching the boards. Keep holes free of burrs and nicks.
7. Screw it on wooden base for seat and back.

ATTENTION! At all stages of work, follow safety rules and be careful when working with electrical appliances.

One more important point There will be tracking at each stage of the product for compliance with angles. The angles must be equal and not skewed. This can be tracked using a level or by comparing diagonals in rectangles. They must always intersect at one point.

Congratulations, the bench is ready, decorate it, remove cosmetic imperfections and enjoy a well-deserved rest.

How to properly install a bench from a profile pipe in the garden

It is important to follow some requirements for installing a bench.

• Your feet should touch the ground during a normal landing.
• The angle of inclination on uneven ground should be such that the bench does not fall and creates comfortable conditions sitting
• The soil under the bench must be made level and stable.
• It is best to place the bench in the shade of a tree or behind a building.
• You can place ornamental plants nearby.

Profile pipes have a number of features that are taken into account when working with them. Despite a number of advantages mentioned above, they have a number of disadvantages:

• Due to the presence of cavities, any openings should be sealed with plugs to prevent corrosion damage.
• They are difficult to decorate and give shape to.

And yet to achieve good result this material is great.

What is needed to make a bench
How to make a bench without a back from a profile pipe
Assembling a bench without a back
How to make a bench with a back
How to assemble a frame with a back

Benches are an integral attribute of any suburban area: their presence significantly increases the comfort of relaxation on fresh air. Since such furniture is used outdoors, special requirements are placed on the reliability and durability of the manufacturing material.

When searching suitable option The choice of material for a bench often falls on a metal profile, the service life of which is quite long. How to make a bench from corrugated pipe with your own hands? Going to hardware store To purchase everything you need, it is important to have a pre-made project on hand. The main drawings of a bench made of a profile pipe must contain the dimensions of the main elements, however, other details are indicated in more detailed diagrams. Drawings of benches made of profile pipes are equipped with numbering of all parts of the structure, indicating their location on the diagram.

To make a garden bench you will need the following materials:

1. Profile pipes with a cross-section in the form of a square or rectangle. They are mainly famous for their strength, and the presence of flat surfaces is very convenient for fixing any elements to them. It is impossible not to remember the aesthetic qualities of this material: they are superior to any other pipe products.
2. Wood beams 50x80 or 40x80 mm. They are useful for making backs and seats.
3. Hardware. It is necessary to have screws with a diameter of 6-8 mm and a length of 80-100 mm. More exact indicators are selected depending on the dimensions of the beams and profile pipes. Wood screws will come in handy.
4. Enamels and primers. They will protect metal surfaces from rusting.
5. Antiseptic impregnations and finishing coatings for wood.

Regarding the list necessary tools, then it looks like this:

1. Grinder, sharpening and cutting wheels.
2. Electric drill with a set of drills.
3. Welding machine capable of using electrodes with a cross section of 3 mm. This is the most acceptable welding option metal parts thicker than 2 mm.
4. Welder's hammer.
5. Jigsaw.
6. Sander equipped with emery cloth.
7. Core, tape measure, pencil (marker).

If you intend to make rounded parts, it is better to also stock up on a pipe bender. In order for paired elements to be identical, during their manufacturing process it is practiced to use the so-called. "eyes". It looks like an ordinary plywood fragment, on which the outlines of all the rounded parts are applied. To check the level of compliance of the existing parameters, a plywood matrix is ​​applied to them.

Once all the necessary equipment for the work is prepared, you can begin the process of constructing a bench from a profile pipe. As some elements are ready, they are numbered, which will greatly simplify the assembly procedure. finished product, which is shown in the drawings. To make a pipe bench easy to use, its parts are made as identical as possible.

When cutting metal, it is important to take into account the thickness of the cutting wheel: the allowance in this case is usually at the level of 5 mm. For precise fitting, use a grinder with abrasive attachments.

How to make a bench without a back from a profile pipe

The design of a bench without a back has the following form: three metal rectangles are fastened together by two pipes, resulting in a seat frame. For example, we can consider making a bench with parameters 230x60x45 cm (length/width/height). The frame of the bench from a profile pipe has a profile with a section of 3x3 cm, in the amount of 11 linear meters.

Cutting is carried out in this way: 6 pieces of 60 cm, and 6x45 cm. They serve components long and short sides of rectangular legs. The continuous framing of the seats and the fastening of the legs is carried out with a pair of long sections of 230 cm each. Next, you need to prepare 8 rectangular bars with a width of 60 mm: they are fixed to the metal frame with bolts and nuts.

It is best to purchase bolts that have a flattened head. round shape, which will protect clothes from gusts. Sometimes, for these purposes, bolts are recessed into the wood, but this increases its flexibility to external climatic influences.

Assembling a bench without a back

It’s quite easy to assemble a bench made from a profile pipe without a backrest with your own hands. The first step is to weld the supports together, then attach a pair of guides to them in the same way. Sometimes they are not used as steel pipes, and duralumin: in this case, they are fixed with bolts, since this material cannot withstand welding.

• Any rectangular support should face the vertical direction with its short part, and the horizontal part with its length.
• During welding work it is necessary to constantly monitor the angles of the supports: they should not deviate from 90 degrees.
• Often, as a result of assembly, the parameters of both length and height increase than those contained in the drawings of a bench made of a profile pipe. If elongation occurs, additional support will be required.
• After welding work, all seams are thoroughly cleaned with a grinder, followed by priming.
• After making the frame, the frame pipes are equipped with a series of holes in the amount of 8 pieces: this will make it possible to attach wooden beams to them.
• To protect the metal parts of the product from corrosion, they must be painted. reliable paint on metal.
• Wood for seats should be impregnated with stain or varnished before use.
• The decoration of seats with boards occurs after all of the above operations.

Sometimes the boards are replaced with a profile pipe: a welding machine is used to fix them, after which the finished bench is hidden with paint.

To make all-metal benches look aesthetically pleasing, a metal frame is placed over the iron slats to cover the sharp edges. The additional profile consumption will be somewhere around 120 cm.

A bench made from a profile pipe without a back is usually made mobile, with the ability to hide it under a canopy or other shelter in rainy weather.

How to make a bench with a back

In this case, the consumption of material and time spent will increase, but these are the garden elements Visitors love it the most park areas. It’s quite easy to make drawings of a bench from a profile pipe with your own hands, fortunately there is free access to the relevant construction sites. Before starting work, prepare 25 mm boards for the backrest, 30 mm for the seats, and a 25x25 mm profile pipe. It serves as material for the following components:

• Inter-support crossbar 155 cm long.
• Sections for the base of the seats: 2 pcs x 35 cm.
• Bent sections for the manufacture of the back support surface and backs, in the amount of 2 pieces, with a bending span of 10 cm, and a height of 78 cm.
• Segments for supporting elements front part: 2x20 cm.
• Support heels. They look like ordinary metal plates. You need 4 of them. size 4x4 cm.
• Bent metal strips: they connect the supports on both sides: 2x45cm.

The seat is made from the following boards:

• Back: 3 pcs. 25x60x1600 mm.
• Bottom: 3 pcs. 30x60x1600 mm.

The boards and frame are fastened together using bolts with a semicircular head, in the amount of 24 pcs. When all required material ready for the bench, you can start making it.

How to assemble a frame with a back

Assembly of the frame is carried out in the following sequence of actions:

1. Connect the crossbar and two 35 cm profiles: the sections should be at an angle of 90 degrees to the crossbar, fixed to it with their central point.
2. This design is equipped by welding with two bent elements having a length of 78 cm.

   How to make a garden bench from a profile pipe?

   The welding point should be on their bends.

3. Next, the front support parts are welded onto the frame. When implementing this procedure, it is important to maintain a distance of 90 mm between the joining point of the base of the seats with the supports and their front part.
4. To make the bench more durable, you can connect the crossbar and front supports using a profile.
5. The final stage of production frame structure is to weld two arc-shaped sections in the middle between the supports. After this, overlays are welded onto the ends of the legs.
6. All welds are carefully ground, and the entire frame is coated with anti-corrosion primer and paint.

Upon completion of the frame, it is equipped with symmetrically arranged seat boards. Thinner elements are attached to the back, and thicker ones to the seat. For their fastening, prepared bolts are used. Instead of boards, the use of rectangular metal pipes is allowed.

To make a bench made of corrugated pipe look more impressive, it is often equipped with additional elements. First of all, these are armrests made from two sections of 75 cm profile pipe. To bend them, it is better to use a pipe bender, and then equip both edges of the bench with them. As a result, it will take on an even more professional appearance, despite its homemade origins. Do-it-yourself garden benches from profile pipes are most often made for private households.

How to make a folding chair: the simplest way

One of the ways to save space in an apartment or house is to use folding and folding furniture. Perhaps such furniture is inferior in its design qualities and convenience to traditional models of tables and chairs, but, firstly, it is compact, and secondly, it is mobile, because it is easier to carry chairs and tables when folded. In addition, by learning how to make a folding chair, you can get “camping furniture” at your disposal, convenient for fishing and while traveling on foot.

Choosing metal

To make camp folding chairs, it is most convenient to use metal rather than wood. The reasons for this are obvious: firstly, metal chairs, as a rule, are lighter than wood, secondly, they have higher strength, and thirdly, they are cheaper.

Steel, of course, has the greatest structural strength of the available metals. However, it is relatively heavy and difficult to process. Therefore, when making a folding chair from metal with your own hands, in most cases aluminum is chosen - more precisely, aluminum alloys. To make a chair you will need aluminum pipes - they can be purchased freely now.

Let's start with a stool

Before making a chair, you can collect even more simple design– folding stool.

DIY metal garden benches: drawings and photos of structures

You can understand its structure by looking at the illustration:

The procedure for making a stool is as follows:

• Take two aluminum pipes of the same length.
• Each of the pipes is arched in the shape of a closed rectangle with rounded corners. The length of the large side of the rectangle will be equal to the height of the stool. The width of one of the rectangles should be slightly less than the width of the other - so that one of the rectangles can be inserted into the other with a small gap.
• The opposite ends of the pipe are connected to each other with a clamp, or carefully welded
• In the middle long sides A through hole is drilled for each rectangle.
• The rectangles are inserted one into the other so that the holes match.
• WITH outside a steel rod (pin) must be inserted into the hole so that it passes through both pipes. A bolt can be used as such a rod. The diameter of the bolt is selected so that both pipes rotate freely around it.
• On the opposite side of the bolt you need to screw the nut, but not all the way. To prevent it from unwinding, it should be secured with locknuts on both sides.

When the bolts are inserted on both sides, the stool is almost ready - all that remains is to install the seat on top, sewing it from durable tarpaulin.

From stool to chair

Now let's look at the illustration showing the folding chair:

From the picture you can clearly see how to make a folding chair with your own hands - simply add a stool with a backrest, which is attached to one of the legs in exactly the same way as the legs are attached to each other. Will need another one aluminum pipe, which can be bent into a U shape and a pair of bolts.

When unfolded, the lower part of the back rests against the legs and is fixed. If you lift such a chair, it will immediately fold up, becoming compact and flat.

Alternative uses

It is also interesting that a folding stool made of metal pipes can be used in the country as a simple folding chair. Here you don’t need to guess how to make a folding chair yourself - just take a ready-made stool, fold it and attach it top part one of the legs to the wall. Now this chair is fixed and can be folded and unfolded at any time. From above, the entire structure can be covered with a decorative cover.

Did you like the article? Share with your friends:

The technology for assembling the bench is simple: it is made step by step using welding metal carcass, and then wood blocks are bolted onto it. The timber is pre-planed, sanded, painted or simply varnished.

A profile pipe differs from a simple (round) cross-section: rectangle or square. Profiles are widely used in both public and private households (the foundations of light buildings and trade stalls, car awnings, park and country swing, verandas, fences, wickets and gates, garden benches). This material contains a description and photo-video guide on how to independently make a simple bench from metal profile And wooden beam, with a wooden back.

Materials and tools

We will consider the simplest and most inexpensive design.

To create it, we will definitely need the tools and materials listed below.

Pipe profile, round head bolts, and wooden blocks, will be useful the simplest machine for bending pipes (see

Do-it-yourself pipe bender for a profile pipe).

1. Profile-25x25.
2. Beam 40x80 – seat.
3. Beam 20x60 back.
4. Welding inverter, F3 electrodes.
5. Angles Sander(Bulgarian), saw.
6. Electric drill with polishing wheel, half-round and flat files.
7. Bench angle, level and tape measure.
8. Plane.
9. Brushes, metal paint.
10. Wood paint, light varnish.
11. Round head bolt, washer and nut.
12. Pliers, plumber's hammer.

Basic drawing and parts manufacturing

Making a bench from square profile does not require large expenditures on material and significant time costs.

Below are drawings - sketches, benches made of timber and profiles.

To make such a bench, you will need 6 meters of profile - 20x25 or 25x25 mm, as well as bars for the bottom of the bench - 40 mm and bars for the back - 20 mm, 5 meters each.

From metal pipe you need to make a frame.

• 1 Profile - pipe - 1500 mm (horizontal crossbar between legs).
• 2 pieces of pipe 750 mm long bent at an angle of 30 degrees ( one-piece back and hind legs).
• 2 360 mm pipes (seat).
• 2 400 mm pipes (front legs).
• 2 220 mm pipes (front leg gussets).
• 4 Plates 30 x 30 mm or large washers from Ф 32 mm (nickels for the legs).
• 2 Curved metal strips 4 by 25 and 500 mm (rigidity of the legs and seat on each side)

When making the wooden part of the bench, you will need bars of the required length.

• 3 bars - 1650 mm, width - 80 mm and thickness - 40 mm (bottom flooring).
• 3 bars - 1650 mm, width - 60 mm and thickness - 20 mm (backrest flooring).

The frame should be connected to the board using bolts with a rounded head, washers and nuts - 24 sets.

Step-by-step sequence of assembly of the structure

When all the parts of the future bench are prepared, all that remains is to connect them.

You need to start with the seat frame:

1. First of all, it is necessary to weld a transverse tube and two 360mm blanks. The transverse profile must be positioned exactly in the middle of two 360mm blanks, at a right angle.
2. Then two 750 mm sections of profile, curved by 30 degrees, are welded to the resulting part. Welding point, under the bending point.
3. Next, the front legs are welded to the already assembled part. Please note (see drawing) the place where the front legs are welded to the seat is shifted 10cm from their beginning, the connection is made at an angle of 15-20 degrees.
4. The front legs of the future bench are connected to the transverse profile with gussets (220mm blanks) for structural rigidity.
5. And now the frame is almost ready. It remains to weld 2 arcs (blanks from a 4x25x500mm strip) between the legs and nickels on the legs.
6. The finished part is sanded (welding joints and seams), primed and painted with paint for exterior use. At this stage, the country bench made of metal should look like the photo below.

Then all that remains is to symmetrically place the prepared bars for the back and seat on this part.

Do-it-yourself benches from profile pipes: drawings and description

You need to process the bars with a plane, stain them with stain and varnish them, or simply paint them with paint for exterior work on wood. A thicker beam - 40 mm - goes on the seat, and a thin one - 20mm on the back. Fasten the beam using a drill with a metal drill and a pair of bolts on both sides of the beam.

How to make a more complex, but much more beautiful bench yourself is shown in detail in the video.

At the end of this article, it would be reasonable to note that the given example of assembling a bench for garden plot is just a basic option. Having assembled the first bench, you may want to make more complex design with decorative flourishes and other improvements. The country bench will become a favorite place to relax and unwind outdoors.