The quality of road lighting at night and in the evening determines the safety of both the driver and all participants in traffic. Therefore, special attention is paid to the issue of choosing lamps. There are many varieties of these products on the market today. Are very popular LED headlights low and high beam LED... There are many varieties of devices in this category.
In order not to get lost in such a variety of offers, you should consider the reviews of experts and experienced drivers. This will allow you to choose the optimal type of lighting fixtures for any car brand.
general characteristics
H4, H7, H1) are popular today among the owners of various car brands. Such devices have many advantages. Their service life is more than 50 thousand hours. At the same time, the power consumed by such a system is only 3.5 watts. For comparison, with similar characteristics, the luminous flux requires 50 watts under equal conditions.
LED types of devices are capable of delivering a beam flux from 30 to 60 lm / W. At the same time, the indicator of a standard incandescent lamp is only 17 lm / W. The glow temperature of the diodes can be different. It meets the requirements for the road head lighting system.
It is not legally prohibited to install such devices in the headlights of various domestic and foreign cars. Such products are suitable for such common types of plinths as H4, H1, H7.
Design
LED headlights low and high beam LED (photo presented below) do not have a certain standardization in accordance with GOST. This leads to the emergence of a large number of products of dubious quality. To choose the original version of the device, you need to understand the essence of the design. 
The standard LED headlight bulb has an aluminum radiator, end fan, high and low beam diodes. By its construction of filaments, such a device resembles a halogen variety. However, the difference between the two is colossal.
The LED, unlike the halogen design, is not a point source of radiation. Additional elements are used to provide the required luminous flux intensity. The LED must have a lens. The cooling system makes the structure massive.
Features of head lighting
Modern technologies for the production of LEDs do not allow the free use of such products for the arrangement of full-fledged head lighting. Such designs necessarily contain a cooling system and impulse power supply stabilizers. This makes the lamp bulky. 
The realities are what to do LED headlights of low and high beam LED on an ATV, m Ultimate or SUV is easier than for a regular passenger car. Due to the peculiarities of the diffusion of the light flux, its geometry, such headlights can either shine on oncoming drivers, or be insufficiently effective.
For the lamp to cool properly, for every 5 W of power, 100 mm² of radiator area is required. In the winter season, such a system will prevent the surface from heating up, due to which the lens will be constantly covered with ice. High-quality lighting can only be provided by expensive products of well-known world brands.
Manufacturers
LED headlights low and high beam LED for multivain, ATVs and other types of vehicles are produced by various manufacturers. They can be conditionally divided into 2 categories. There are varieties that are produced by Chinese companies. They are little known to consumers. The cost of such products will be relatively small. 
The second category includes products of famous European brands. The main production facilities are also located in China. However, these are advertised companies that can produce very expensive equipment. The cost of such lamps can reach 40 thousand rubles. and more.
There are devices on the market and domestic companies. They are also manufactured in China. To choose a high-quality model of the presented equipment, you will need to understand the essence of the marking. The cost of a lamp does not always guarantee a high quality product.
Features of marking
Wanting to replace DIY LED headlights for low and high beam LEDs, it is necessary to learn a few subtleties about the system of writing the technical characteristics of the device. Unscrupulous manufacturers go for certain tricks. An untrained buyer may not notice such subtleties and become a victim of deception. 
First of all, you need to pay attention to the power parameter of the device. It can be, for example, 50 W. In this case, each lamp (of which there are 2 in the kit) will have a power of 25 watts. The indicators can also be added when indicating the voltage. 12 V lamps can be labeled as 24 V.
The practice of adding characteristics is also used when specifying the luminous flux. No cheating should be expected in the indication of the light temperature. The moisture protection class is also indicated correctly. It is important to pay attention to the headlight housing. It should be made of aluminum or some other similar alloy.
Application of LEDs
It is rarely used as the main source of head light. In this case, the stream of rays will be blurred, visibility on the road will be insufficient. In order for the focusing and diffusion system to be of high quality, such devices require the use of expensive additional equipment. 
In expensive car brands, matrix systems of light flux diffusion are used. This requires complex calculations during production. Therefore, equipment in this category is expensive.
It is more expedient to use LEDs in headlights as an additional lighting device. Such products will be economical and environmentally friendly. The configuration of additional light sources may vary. LED beams are very popular. The presented LEDs are installed on cars, SUVs.
Varieties
To replace original devices in various types of cars with LED products, you need to choose the right type of device. Equipment of this type conventionally presented on the market can be divided into three categories. 
The simplest LED designs are found in the Hyundai Tucson, Toyota Land Cruiser and Nissan X-Trail. The cost of the original system for such vehicles is in the range of 8-10 thousand rubles.
The upper class category includes LED headlights for low and high beam LED for Chevrolet Cruze, Kia, Lexus. These are matrix constructions. They can dim the intensity of the glow segmentally.
Replacement of original headlights
Can be replaced with non-original devices. The price of such products will be lower than licensed devices. So, "Hyundai Solaris" has headlights with lamps worth 8500 rubles. For this car brand, the Chinese company Direct Parts produces LEDs 4800 rubles.
For Renault Logan (the original price is 4500 rubles), the Spanish manufacturer Alkar produces lamps worth 2400 rubles.
"Skoda Octavia" includes headlights with devices worth about 9500 rubles. Finding LEDs for this car is difficult. The Italian company Magneti Marelli produces lamps for this car brand worth about 10,500 rubles.
The Chevrolet Cruze car has original devices, the cost of which is 16,500 rubles. For this model, two manufacturers at once offer to purchase LED headlights. The Taiwanese company Depo supplies the market with elements worth 4500 rubles. Alkar makes better devices. The price is 9500 rubles.
The choice depends on the car model. Genuine and non-genuine products may vary significantly in terms of light quality.
