A plastic window will not be 100% functional without a mosquito net. In addition to its main function - protection from insects, the net protects your home from dust, poplar fluff and small debris carelessly thrown out by neighbors from above. If you decide to buy a mesh in finished form, take your time.

We will tell you how to make a mosquito net for a plastic window with your own hands for 72 rubles.

There are two reasons that encourage people to refuse to buy a ready-made mosquito net in a frame with fasteners. Firstly, this is the price, which depends on the size of the window and is approximately 700 - 1000 rubles. Secondly, the problem is where to store window screens in winter. They are quite large and take up significant space in the apartment, which is always not enough. The option we’ll introduce you to will cost you 10 times less and will take up no more space in your closet than a shoe box.

So, the choice is obvious, let's get to work. To do this, we need a piece of regular mosquito net the size of the width window opening, with an increase of 4-5 cm on each side. You can buy it at any hardware store. You also need to buy a cord, optimally with a diameter of 4 mm. Please note that the diameter must be indicated on the cord markings. When purchasing, you should not go by eye, since you will not be able to fix the mesh with a cord of a smaller diameter, and it will be much more difficult to deal with a larger diameter.

Installation of mosquito net

When necessary materials already in front of you, the installation of the mosquito net itself will take you no more than half an hour. Open the window sash where you will install the mosquito net.

Carefully remove sealing gum from the frame around the perimeter of the open window. There is no need to remove the sealing rubber on the sash itself.

A mosquito net is assembled from ready-made kits or scrap materials are used for production. When planning how to make a mosquito net with your own hands, it is important to take into account the features of the window design and the nuances of operation.

Before you start self-production protective addition to double-glazed windows, you should understand the types and design features mosquito nets. Models are classified according to the type of attachment to the frame, canvas material and functionality.

Frame type meshes

Frame structures, as one of the most popular types of mosquito repellent devices for plastic windows, are distinguished by high performance characteristics. Products are most often made from PVC profile or aluminum. Features of frame grids:

• the model is focused on standard double-glazed windows;
• can be installed both inside and outside the light block;
• valued for ease of installation, ease of use, durability, and resistance to climatic influences.

Frame anti-mosquitoes are used when arranging window designs both from PVC and aluminum and wood.

There are 3 types of frame structures:

• model with a soft polymer handle. Fixation is provided with rubber, service life is within 2 years;
• with a hard plastic handle. The model is equipped with special fasteners for installation, the service life varies from 5 years;
• with metal handle. Frame mosquito nets in this category are highly durable, secured with rivets, and can reliably serve for 10 years or more.

Products are made to order according to the overall parameters of the window unit being installed.

If you plan to install a frame mosquito net on a plastic window with your own hands, it is important to take accurate measurements, taking into account the nuances of installation.

Frameless grids

Popularity of flexible mosquito control options plastic windows due to ease of installation and operation. For example, a model with adhesive tape can be easily attached to the frame from the outside. The solution is attractive due to its availability, simple and quick installation, and low maintenance requirements.

Burdock versions of protective sheets are easy to dismantle, store in a compact form and, if necessary, install for reuse. Frameless nets with fixation on hooks and magnetic fastening are also relevant.

Rolled

Anti-mosquito products in this category demonstrate high functionality and aesthetic qualities. The roller design resembles roller blinds. The box with the shaft is located on the top line of the window system; the roll moves using rollers and guides. The product can be mounted on a frame or in a light opening.

The original design turns the cellular fabric into an effective complement for double-glazed windows of increased sizes. If desired, you can easily choose a model in horizontal or vertical variations. Rolled mosquitoes are presented in a relatively expensive segment. It is also worth considering that the structure is difficult to install on your own; the help of a specialist is required.

Sliding nets

The products are most often made of nylon fabric and aluminum profile. Sliding mosquito nets are relevant in the arrangement of balcony windows; they are also actively used as a protective addition to light blocks country houses. The model is equipped with a system of guides and rollers; the canvas moves laterally. The solution is not suitable for all windows; it is made to order.

Requirements for mosquito protection

Among the key requirements are the service life of the anti-mosquito, design features and the ability self-installation. When choosing mosquito protection for your home, consider the following points:

• characteristics of the canvas. In the manufacture of mosquito nets, polyester, cotton, nylon, and fiberglass are used. Synthetic solutions are highly durable, natural options are valued for their hypoallergenicity;
• cell sizes. The material with very small cells of 0.6 mm provides absolute protection against mosquitoes, midges and other biting insects. This creates an obstacle to air exchange. Since the surface becomes clogged with dust and pollen particles over time, as a result, the fine-mesh mesh practically does not allow air to pass through. Standard sizes cells protective cloth vary in the range of 1-1.2 mm;
• functionality. When installing window systems in an apartment with pets, the “anti-cat” mosquito model is a priority. The solution involves a high-strength metal cellular fabric that can withstand the weight of a mustachioed pet if it decides to jump out into the street through a window.

If there is a need for protection from seasonal allergens in the form of pollen, poplar fluff, or street dust, choose the “anti-dust” mosquito model with a fabric made of twisted polyester threads.

The optimal type of mosquito net attachment

Mosquito protection is attached to the frame of the window system in various ways:

• on the plunger pins. If the size of the frame corresponds to the dimensions of the sash being installed, installation is carried out using a plunger fastening;
• on the ears. Z-shaped fasteners are pre-screwed onto the frame from the outside, and the mosquito net frame is fixed to them;
• on hooks. The frame is equipped with special elements that, when installing the mosquito, cling to the frame;
• on tape. Adhesive tape is used to attach the honeycomb fabric to the frame of the sliding structure;
• Velcro. Frameless mosquito protection options are secured with Velcro.

The protective system with the “anti-cat” function provides several additional fastenings to ensure safety pet. Optimal view Mosquito fixation is selected individually depending on the characteristics of use.

Options and making a mosquito net yourself

If you plan to make a mosquito net with your own hands, you often use ready-made solutions For self-assembly. The kit for the frame structure includes a set of fasteners, a honeycomb fabric, a seal, a profile, and handles. It is also important to make a structure with your own hands based on a cable channel. For economical arrangement It is easy to make a frameless version of a mosquito net for a window system in a private house.

Tools and materials

To assemble a mosquito net from a purchased kit, you will need the following tools:

• electric drill;
• screwdriver;
• hacksaw for metal;
• tape measure, mounting knife.

A screwdriver is a tool for making a mosquito net with your own hands

The finished set includes:

• frame profiles – 3 pcs. 1.5 m long;
• impost – transverse profile – 75 cm;
• bracket for impost – 2 pcs.;
• corners – 4 pcs.;
• mesh – 1.6x0.8 m;
• rubber cord – 4.6 m;
• handles – 2 pcs.;
• self-tapping screws

The kit is completed with brackets of different lengths for mounting the product on window frame.

Preparatory work

At the beginning, measurements are taken, taking into account that the quality of a homemade anti-mosquito depends on the accuracy of the parameters of the window opening. If the skylight width is 445 mm at a height of 1250 mm, correct sizes the frame is calculated in the following way:

• 445-40=405 mm;
• 1250-20=1230 mm;
• the length of the impost corresponds to the width of the opening - 445-30 = 415 mm.

The measurement formula is universal; you can insert the current parameters of the light block and calculate the dimensions of the planned frame for the grid.

Stages of manufacturing and installation of frame sashes

The measurement results are transferred to the profile and blanks are cut in the form of long and short profiles plus an intermediate element - an impost. Next comes the stage of assembling the frame and fixing the cellular fabric using a sealant:

• assemble a rectangular frame using connecting corners;
• fix the brackets and install the impost, aligning it in the center;
• the mesh is applied to the frame from the side where the groove is, and starting from the corner, it is pressed in together with the sealing cord;
• in the process of fixing the mesh into the frame, insert the handle into the groove and press it with a cord;
• Then the fabric is tensioned, pressing the seal along the perimeter of the structure. At the end, cut off the excess sealant and honeycomb fabric.

• points for self-tapping screws are marked in the lower and upper parts of the profile;
• drill holes to a depth of 3 mm;
• carefully fix the brackets with self-tapping screws so as not to pinch the profile.

The homemade structure is pushed into the frame opening, first hooked to the profile with the upper brackets, then the lower elements are fixed.

Manufacturing and installation of frameless protection

Deciding how to make inexpensive mosquito net on the window with their own hands, they often use improvised materials. Based on cellular fabric and clothesline, it is not difficult to build protective device from mosquitoes, midges and flies.

Tools and materials:

• nylon mesh;
• synthetic rope d4 mm;
• segment knife;
• roulette.

Sequence of work:

1. The canvas is cut to the size of the sash with a margin of 1 cm around the perimeter.
2. Open the sash and carefully remove the standard seal. Next, it should be washed and stored until the onset of the cold season.
3. The groove is cleaned of dirt.
4. Fix the perimeter of the mesh into the groove along with the rope, starting from top corner profile.

Stretch the fabric evenly to avoid wrinkles. This type of barrier against mosquitoes and flies is easy to dismantle and put away for seasonal storage, and the window seal can be inserted back into the groove.

Annoying insects make it difficult to live and sleep peacefully at night during the warm season. They fly into the house through open windows. Despite the presence large quantity special sprays and electric mosquito catchers, only a mosquito net can significantly reduce the number of insects. Today, when replacing windows, you can additionally order this element, which costs money. How to solve the problem on a budget? In fact, everything is very simple, since a mosquito net can be assembled with your own hands very quickly from available materials.

Safety nets

Before you go to the hardware store for all the necessary components, you should decide on the type of mesh. They all differ in different parameters:

1. By type of fastening: hooks, Velcro, pins and Z-shaped brackets.
2. By type of opening: stationary, removable, sliding and roller.
3. According to the presence of a frame: framed and frameless.
4. Attachment location: internal and external.

Each of the listed types has its own advantages and features, but also disadvantages. All this is important to take into account in order to do right choice and don't waste your money. Special attention is given to the method of fastening, so let’s figure it out: what are the pros and cons?

1. The frame is very rigid, because it is made of metal with a mesh fabric. Can be installed on both plastic and wooden windows from any side.
2. The sliding mount is only suitable for aluminum windows, since sliding sashes will be used.
3. mosquito net on magnets - a very popular option for those who want to quickly get rid of insects. It is attached to both windows and doors. In the latter case, you don’t have to worry about cross-country ability, since the curtains easily open and close instantly.
4. Rolled mesh will allow you to conduct effective fight with mosquitoes. The material is easily rolled up and unfolded from a cassette placed above the window.
5. Simple Velcro is also easy to attach and remove. In this case, the mesh can be washed in the washing machine at any time.

Mosquito nets are installed not only on windows, but also on doors, since mosquitoes and midges also penetrate through them.

Selecting a canvas

The main element of any mosquito net is the canvas. You can buy it at any hardware store by the meter or in a roll (about 30 m). If you only need to make a couple of grids, then it’s better not to spend money and buy required amount meters. For a larger number of protective nets, it is worth comparing prices: they may differ per square and per linear meter.

If we talk about quality, it is important to take into account several parameters:

• cell size;
• thickness of the canvas;
• material type;
• strength.

To create an anti-cat mesh, the strength parameter is very important, since it must withstand all “attacks” of domestic animals. The most ideal option For this purpose, polyester with special impregnation will be used. Additional fasteners are also required. It is especially important to install such mosquito nets on the balcony.

When determining the size of the cells, you should take into account the size of the insects in the area from which you want additional protection. Minimum size cross-section is 0.25×1 mm. Such a net can become a reliable protector not only from mosquitoes and flies, but even from sand, poplar fluff and dust. To protect windows and the room from rain, experts recommend a section of 1×1 mm.

Having decided on the materials and made the necessary purchases, you can begin production. How to make a mosquito net for a framed or frameless window yourself will be discussed below. The protection will be the same functional as from production.

The quality of the protective mesh will be determined by the material from which it is made. IN Lately The most popular is fiberglass with a polymer coating.

Manufacturing of frameless mesh

This is the simplest and a budget option, which will allow you to make a removable mosquito net for little money. The easiest way to make the protection stationary is to simply glue the canvas to the window frame. To make it better fixed at the edges, sew a tape of material with high adhesion properties. When it comes to wooden windows, ordinary push pins can serve as additional fasteners. There is one significant drawback here - such a mesh cannot be removed for washing.

It's better to put in a little more money and effort to get universal protection. It's about about the Velcro mesh. To make it yourself, you will need the following materials:

• anti-mosquito material according to the size of the window;
• Velcro tape (burdock - one side with pile, the other with hooks);
• construction adhesive.

Measurements are taken along the inner (opening) part of the window with a margin of 1 cm on each side. This size is necessary to fix the future mosquito net. One part of the adhesive tape is secured around the perimeter of the window using construction adhesive (for example, Titan) or simple double sided tape. The second is sewn along the entire perimeter of the mesh. When everything is ready and the glue has completely dried, you can fix the protective sheet.

The entire work process takes a maximum of 2 hours, and as a result everyone receives reliable protection from insects.

Before gluing the Velcro to the plastic, it should be thoroughly washed and degreased with alcohol.

Manufacturing of frame type mesh

Unlike the previous method, it is somewhat more complicated, but still anyone can handle it. It should be noted that such option will do and for making a mosquito net for the door. So, to install the frame with your own hands you will need the following components:

• cable channel rectangular section 15×10 cm (the length is determined independently based on the external parameters of the frame where the frame will be fixed);
• metal corners 10 mm – 4 pcs.;
• blind rivets – 16 pcs.;
• thin nylon mesh;
• construction adhesive.

Tools:

• whetstone;
• pencil;
• scissors;
• roulette.

Let's move on to the construction of the structure:

1. We take measurements outside window opening. Based on the data obtained, a frame will be made.
2. Celebrating on plastic box length and width.
3. Using a knife, cut the vertical and horizontal parts at an angle of 45°. The cut areas are carefully polished with a sharpening stone.
4. We assemble the structure: we fix the corners with special connecting rods metal corners with rivets (nuts and screws will also work).
5. We apply a mosquito net with an allowance of 2 cm on each side.
6. In the upper part we clamp the canvas with the cover of the plastic cable channel. During the snapping process, we change the long and short sides. For reliability, we glue some places with glue.
7. We cut off the excess fabric with scissors.

The finished mosquito net is installed in the window opening using Z-shaped brackets.

And this is how a mesh is assembled from a special profile:

Restoration of mosquito nets

An equally important process is restoration, which includes the following main stages:

• Removing the frame from the brackets.
• Cleaning from dust and dirt.
• Removing damaged nylon.
• Installation of the repaired mesh in the window opening.

Before replacing any element in the structure, you need to pay attention to how it is fixed and whether it can be removed. Most of the elements on the mosquito net from the manufacturer are fixed with a special sealing cord. If you carefully remove it, the holders can be easily removed.

All renovation work carried out very carefully. It is important to remember that you are working with a fragile structure.

As you can see, in order to make a mosquito net with your own hands, you will have to spend 2 or even 3 times less than when ordering a similar design from the manufacturer. In addition, the installation process is quite simple and does not require special knowledge or equipment.

Video

See below for instructions on how to make a mosquito net for plastic windows:

You can do without making a frame if you proceed like this:

DIY mosquito net made from cable channels

Spring has come, and with it mosquitoes. The balcony has aluminum sliding window. There was no mosquito net for it, so I wanted to buy a factory one, but after learning the price, I refused and decided to make a homemade one.

Let's get started.

We buy in the store a cable channel 25*16-3pcs, 2m each, 15*10-1pc, rivets, mesh and corners. We take the corners in such a way that they can be easily inserted into the cable channel. I only found these:

But after trying them on at home, it seemed to me that the design would be a little flimsy. Therefore, at work, corners were made from fiberglass along the width of the cable channel.

Rivets and the rivet maker himself.

So... we decide on the dimensions of the future frame and begin to cut the cable channel at 45 degrees. In order not to spoil the chair, which is also a temporary workbench))), I used a 20*20mm block as a backing.

We saw and saw and we get this part. By the way, I remembered about the cable channel with the camera function late, so I assembled part of the frame without capturing the moments of its assembly.

We sawed it off and tried it on. Everything seems to be normal and smooth.

We insert the corner into the cable channel, drill or pick (the plastic is soft, everything is easy to pick), insert the rivets and rivet. As a result, you get such a beautiful connection.

Houston, we have problems!!! The nail of the rivet came off in the wrong place ((. Well, no problem, this can be treated with a file. It’s not for nothing that they say, after assembly, process it with a file)))

We glue on both sides.

Let's try it on. Floor tiles were used as a square.

After riveting, we get a smooth, beautiful-looking connection.

View from inside the cable channel.

The top (or bottom) part is in place.

Assembled frame.

During the manufacturing process, it was decided to add a jumper in the middle of the frame for rigidity. To do this, two T-shaped parts were cut out of fiberglass. There is no process for cutting a hole for the part, but everything is simple, we carefully cut it out with a stationery knife so that it fits through.

ATTENTION! Fingers! You can cut it into two.

The jumper is in place.

The most interesting thing begins. We need to tighten the mesh. Here my wife comes to the rescue, but she doesn’t do it herself ((. There is no stretching process, since the arms, legs and improvised objects were busy. We take the mesh with an allowance of 2-5 cm. We stretch the mesh so that there are no folds and sagging. In order for the cable channel (its upper part) did not open during operation, before snapping it into place, we drip on it every 10cm super glue and quickly put it in place.

After tensioning and assembly, we cut off the excess mesh flush with the cable channel.

View of the finished mosquito net. Next, we’ll figure out how you’ll attach it to the window. I got it like this: on top of the same fiberglass, guides (ears, spikes, call it what you want) are cut out and riveted in place on top, and something like an eccentric on the bottom. When inserting a mosquito net into the window frame, its upper guides fit between the frame and the window sash, and at the bottom we turn the eccentrics so that they also fit between the frame and the window sash. The grid is fixed, but if necessary, it can be moved left or right.

The mosquito net is in place.

An effective means of protection against mosquitoes and other small insects is a mosquito net. Can be purchased finished design, or you can make it yourself. Application modern materials allows you to make mosquito protection for a window from a mesh material that will fit tightly to the window frame and have a neat appearance.

Types of protective mesh

Before starting production, you need to decide what type of mesh is needed. They differ in different parameters:

• by type of fastening - on hooks, Velcro, pins, Z-shaped brackets;
• by type of opening: stationary, removable, sliding, roller;
• by the presence of a frame: on a frame (frame), frameless;
• according to the mounting location: internal or external.

Below we will describe how to make frameless ones - stationary and removable, as well as a mosquito protection option - a mesh on a frame made of a cable channel.

How to make a budget version of frameless mesh?

The simplest version of a frameless mesh made by yourself is stationary. The canvas is simply glued to the window frame. But since the canvas itself does not hold well, you must first sew a strip of material with good adhesion around its perimeter. It can be any fabric tape. If installing on wooden window, the canvas can be additionally secured with buttons. The advantage of this method is maximum simplicity, the disadvantage is that the mesh cannot be opened or removed to clean it from dirt. That is, after some time it will have to be dismantled and the entire procedure performed again.

The second option is a mesh with Velcro. In order to make it yourself, you will need the following materials:

• anti-mosquito fabric;
• Velcro tape (Velcro, “burdock”);
• construction adhesive.

Part of the tape is attached with construction adhesive to the inner quarter. That is, to the part of the frame to which the window sash is adjacent when closing. The second part is sewn along the perimeter of the mosquito net. Before applying the glue, the area of ​​the frame on which the glue will be applied must be degreased and cleaned of dust. The advantages of this type of frameless mesh are that it is “reusable”; if necessary, it can be opened slightly or completely removed. In terms of cost, it also belongs to the budget option.

To attach Velcro to the frame, it is better to choose a transparent rubber adhesive, such as Tytan, which can then be easily removed without leaving any residue. This is especially important if the window is plastic - rubbing and repainting it like a wooden one will not work here.

DIY frame type design

To make a frame with your own hands you will need the following elements.

• Rectangular cable channel (15×10 mm). The length is determined based on the outer perimeter of the frame, where the frame will be attached.
• Metal corners (10 mm) – 4 pcs.
• Blind rivets – 16 pcs.

Related article: Creating an interior: how to choose furniture to match the wallpaper?

The tools you will need are a metal file and a drill. First of all, the dimensions are taken - height and width. We cut 4 pieces from the cable channel at an angle of 45 degrees and fold them into a rectangle. Having placed the corners on top, you need to drill holes in the profile so that they exactly coincide with the holes in the corners. Then the structure is connected using rivets - and the frame is ready. Please note that when riveting, the riveter must be located outside the cable channel.

After the frame is ready, you need to secure the canvas in it. It is placed over the frame and snapped into place with the cable channel cover. To fasten it evenly, without sagging, you need to start fastening along one of long sides. In this case, you need to make sure that there is no distortion. Then the canvas is secured to one of the following sides of the frame.

It is better to fasten the opposite sides with an assistant, since here you will need to provide light tension. At the same time, stretching the canvas, making sure that there is no distortion and snapping the bar in place is inconvenient, so an extra pair of hands will come in handy here. Frame-type mosquito net can be attached to a window different ways. The most common is the plunger type, using Z-shaped brackets.

To avoid the strip snapping off, it is better to additionally secure it with glue. To do this, when the structure is completely ready, you need to apply a small amount of glue into the gap between the cable channel and its cover (bar).

How to choose a canvas?

The main element in any such design is the canvas. It is sold in rolls and by the meter. There are about 30 linear meters per roll. If you need to make 1-2 designs with your own hands, then it is better to buy by the meter. When comparing prices, please note: they can be indicated both per square and per linear meter. In terms of quality, the canvas differs in the following parameters:

• cell size;
• thickness of the canvas;
• material;
• strength.