Content

1. What is a pyrolysis boiler?
2. Types and specifications boilers Burzhuy K
3. Advantages and disadvantages
4. Installation features
5. What boiler owners say Bourgeois K

Introduction

Many owners of private houses are increasingly choosing a pyrolysis boiler as a heating source. However, imported devices have a significantly high cost. Not so long ago, solid fuel pyrolysis boilers appeared on the domestic market. Russian production under the brand name Burzhuy K. During this time they have earned many flattering reviews from both consumers and professionals. In this article we will look at the lineup Bourgeois K boilers and let’s see what their main advantages are. So let's get started.

What is a pyrolysis boiler?

Pyrolysis is a method of dry distillation of solid fuel. Under the influence of high temperature, it decomposes into solid and gaseous components, which are then burned separately.

Photo 1: Heating hot water pyrolysis boiler Burzhuy K

1. With manual air supply adjustment

   The amount of air supplied is adjusted using an adjusting bolt.

2. With automatic adjustment

   The amount of supplied air is adjusted automatically using mechanical regulator temperature

3. With automatic adjustment and FGP circuit

   In addition to the presence of automatic air supply, the solid fuel boiler is double-circuit, i.e. equipped with an additional hot water supply circuit.

Photo 3: Pyrolysis TT boiler Burzhuy K long burning

Solid fuel boilers Bourgeois K can operate on the following types of fuel:

• firewood;
• coal of any brand;
• woodworking waste.

The following is used as a body carrier:

• water;
• non-freezing liquid.

The plant produces these three modifications of pyrolysis boilers with a capacity of 10, 20, 50 and 100 kW. Below is a table of models presented on the official website:

In addition to the devices listed above, the company BURZHUI-K LLC announced the release of a new model with an electric heating element.

Let's also consider other technical characteristics of solid fuel boilers Burzhuy K:

• Efficiency 85%;
• Weight from 180 to 900 kg depending on the power of the pyrolysis boiler;
• Maximum working temperature 90C;
• Output gas temperature up to 150C;
• The minimum permissible pipe height is from 7 to 13 m;
• Chimney diameter from 150 to 250mm.

Return to contents

Advantages and disadvantages

Heating boilers Bourgeois K have a number of advantages, thanks to which they have taken a leading place in sales among domestically produced devices. Let's take a closer look at their advantages:

Photo 4: Floor-standing pyrolysis TT boiler Burzhuy K

• thermal insulation

  All modifications of Burzhuy-K boilers are equipped with reliable thermal insulation from mineral wool. This will allow you to significantly reduce heat loss and reduce the cost of heating your home.

• steel body

  The body, as well as all other components, are made of special heat-resistant and corrosion-resistant steel, developed specifically for the production of boilers and capable of operating under pressure. The device contains more than 200 different parts.

• powder coating

  Powder coating protects the body of the solid fuel boiler from moisture and various salts and acids. This coating is not afraid high temperatures and has high abrasion resistance and strength, which will allow you to maintain a decent quality for a long time appearance boiler

• automatic adjustment burning

  Thanks to the presence of a mechanical temperature regulator, the likelihood of overheating is significantly reduced. Compliance with the required temperature conditions will extend the service life of both the pyrolysis boiler itself and the entire heating system as a whole.

• energy independence

  The absence of components in the design that require power supply provides undeniable advantages for use in areas remote from power lines.

• presence of a FGP circuit

  In addition to performing its main function - space heating, the double-circuit pyrolysis boiler Burzhuy K is capable of producing hot water for sanitary needs.

• efficiency

  Thanks to the use of the pyrolysis principle, it is achieved high efficiency fuel use. When the boiler is operating, a small amount of ash remains, and the gaseous waste consists almost entirely of water vapor.

A pyrolysis boiler is a system whose operating principle is based on the combustion of solid fuel. The main difference from conventional solid fuel stoves is the release of gas, which is also used for heating heating equipment. This leads to fuel savings, since the frequency of laying is significantly reduced. A review of pyrolysis boilers will help you get up to speed TeploGarant Burzhuy-K, reviews and recommendations from owners.

The long-burning solid fuel pyrolysis furnace BurzhuyK can be used both in private homes and in industrial premises. Thanks to the compact size of the unit, it is not difficult to allocate space for a boiler room. Firewood is loaded on average once every 12 hours. Combustion occurs in 2 stages: in the first, the wood burns, releasing pyrolysis gases. The design assumes the presence of a second chamber into which combustion products enter. At the second stage, the gas is burned, due to which the efficiency of the system becomes significantly higher. Depending on the model, the boiler is equipped with a mechanical thermostat, which leads to automation of the process; different kinds fuel.

Technical features

The pyrolysis heating system is confidently conquering the domestic market. Due to rising prices for electricity and gas, owners of private houses are looking for a worthy alternative to your old heaters. The following features encourage you to buy a pyrolysis solid fuel heating boiler of the Burzhuy-K series:

• Installation does not require special permissions.
• A wide range of models makes it possible to purchase a boiler of optimal power.
• It does not take much time for the furnace to reach optimal mode.
• Provided complete combustion without ash formation.
• There is no need for constant adjustment of work.
• Not only firewood is used, but also coal.

The characteristics of the boiler will depend on the specific model chosen. The determining indicator is power - it affects the performance of the unit. Pyrolysis boilers from Burzhuy-K LLC can have parameters from 10 to 2,500 kW.

Advantages of BurzhuyK stoves and selection criteria

Heating systems using pyrolysis boilers are becoming increasingly popular. Compared to other types of devices, Burzhuy-K has the following advantages:

• Simplicity of design.
• Economical consumption.
• Compact sizes.
• Possibility of use different types fuel.
• Easy to use.
• Autonomy.
• Complete combustion of fuel, no ash.

The number of disadvantages of this equipment is much less, but they still exist:

• A tall chimney clutters up the space.
• Despite domestic production and the lack of customs clearance, the price cannot be called publicly available. The cost of a Bourgeois-K heating boiler reaches 2,500,000 rubles.

The first thing that is determined when purchasing a pyrolysis furnace is power. It should be sufficient to heat the entire house. According to standards, 10 m2 requires 1 kW. If there are several models required power you should pay attention to additional functions. Various modifications may contain an automatic draft regulator or a hot water supply circuit, which will facilitate the operation and maintenance of the boiler and provide hot water for household needs.

Reviews of TeploGarant gas generator boilers

« We decided to change the old one heating system in the house. We were advised pyrolysis boilers from LLC Burzhuy-K, installation was carried out by craftsmen. Over the course of a year of work, several unpleasant aspects have emerged: firewood burns out in 2-3 hours, that is, 3 times faster than indicated in the equipment passport; From time to time the chimney pipe and the inside of the stove become clogged. In the second year, the grates burned out. Unfortunately, the data stated by the manufacturer does not correspond to reality. Judging by the reviews, the Bourgeois-K T-20A did not please anyone, I will return the boiler under warranty. We hope the replacement model will be of higher quality.”

Andrey, Vologda.

“We purchased a pyrolysis single-circuit boiler of the Burzhuy-K T-10 series for two-story house. There have been no complaints in 3 years. We installed it ourselves and did it successfully. It functions well, is very economical (loading fuel in 10-12 hours) and easy to use (you can set the required temperature). Easily copes with heating a house of 100 sq.m. We're happy with the choice."

Marina, Moscow region.

“I have 2 pyrolysis boilers Burzhuy-K TA-20 installed in my house. During operation (2 years), both leaked and had to be replaced under warranty. New stoves have been operating without repair for almost a year, most likely something in the design has been changed. I hope I don't have to return any more. Otherwise, I’m happy with the boiler; the wood burns in 8-9 hours (I consider the consumption quite acceptable). Cleaning is necessary no more than 2 times a year.”

Konstantin, Tyumen.

“We bought a pyrolysis solid fuel boiler Burzhuy-K Iskra 4 years ago. Accepts any solid fuel from cardboard to tires and requires cleaning 2 times a year; chamber and grates - as they are filled, approximately once a month; As for the chimney pipe, it has never been cleaned, as everything burns out. For those who doubt their choice, I recommend boilers from the Burzhuy-K company.”

Vorobyov Anatoly, Chelyabinsk.

“I’ve been using the Burzhuy-K T-20A since the beginning of the season. I installed it to heat a car wash with an area of ​​155 m2 with a ceiling height of 3 m. In 2 months, the wood consumption was about a cubic meter. Last year I had to use eclectic heaters, the bills cost almost 10 times more than the price of fuel. The cost of the boiler will be recouped in two months. Loading is done by the washing staff: they add 2-3 times a day, very little ash remains. I consider purchasing a stove profitable.”

Kondratenko Sergey, Bryansk.

“I have an old homemade boiler of my own design, the efficiency is approximately 96%, but it is for coal. I started to hit my pocket and bought Bourgeois 20. It’s good that I didn’t cut out the old one. With our material (pine, larch) and temperatures above -40 there is no use for it. From loading to loading – 3 hours, only in the months of September-October, March-April – maximum 5 hours.”

Kamenshchikov Sergey, Tula.

“The Burzhuy-K T-12 boiler is installed in a room where the temperature is not lower than +20. The chimney is 7 m, heats normally, does not smoke, there is no condensation or pyrolysis combustion. Small pine firewood burns for 2 hours, large ones - 3. Before that, there was Karakan-15 - one stash was enough for 2.5 hours. Karakan-15 cost 13,000 rubles, and Burzhuy-K - 44,000.”

Anatoly, Moscow.

Characteristics

The floor-standing, non-volatile solid fuel pyrolysis single-circuit hot water boiler Burzhuy-K STANDARD-10 with an open combustion chamber is designed for heating private houses, small offices and greenhouses, individual workshops in production and other facilities with an area of ​​up to 90 m2 (with a ceiling height of 3 m) equipped with water supply systems. heating with natural or forced circulation. Boiler Burzhuy-K STANDARD-10 is a unique long-burning boiler of its kind, which is very easy to set up and is ready for operation immediately after being integrated into the heating system.

Peculiarities

• Main type of fuel: wood, sod peat, briquetted fuel, coal (up to 5000 kcal)
• Diameter of wooden logs: 40-100 mm
• Maximum permissible wood moisture content: no more than 20%
• Approximate interval for adding fuel to the boiler: 5-12 hours
• Fuel economy: increase in continuous operation time on one stack (compared to direct combustion boilers) by 3-5 times
• Environmental friendliness: the amount of harmful emissions into the atmosphere is minimal ( harmful substances burn together with pyrolysis gases)
• The boiler does not require constant monitoring, frequent cleaning (fuel burns with virtually no residue) and complex maintenance
• Small dimensions and weight simplify delivery and operation of the boiler
• All-welded steel structure consists of: a lower primary air supply chamber, a loading chamber, an upper gas afterburning chamber and a heating and secondary air supply chamber
• Boiler casing (purchased separately): made of metal sheet with a heat-resistant coating and a layer of non-flammable basalt insulation, providing excellent thermal insulation
• The boiler has an enlarged firebox, which simplifies the process of preparing firewood

Specifications

Boiler type Solid fuel

Operating principle Pyrolysis

Mounting method Floor

Thermal power, kW 10

Chimney diameter, mm 130

Steel

Non-volatile Yes

Firewood Yes

Coal Yes

Control Mechanical

Manufacturer Russia

Boiler type Solid fuel

Operating principle Pyrolysis

Number of circuits Single circuit

Mounting method Floor

Thermal power, kW 10

Chimney diameter, mm 130

Primary heat exchanger material Steel

Non-volatile Yes

Firewood Yes

Coal Yes

Control Mechanical

Manufacturer Russia

Fuel capacity of wood/pellets/coal, kg (dm3) 0.055

Burning time of one bookmark, hour 5 - 12

Firebox depth, mm 500

Heating system water inlet/outlet diameter, inch 1 1/2"

Fuel used Wood, peat and wood briquettes, sod peat, coal

Maximum length wooden logs, mm 450

Maximum area of ​​heated room, m2 90

Maximum operating temperature, ºС 95

Maximum room volume, m3 270

Minimum height chimney, m 7

Required traction in chimney, Pa 18

Volume of water in the boiler, l 18

Boiler furnace volume, l 45

Preferred moisture content of firewood, % No more than 20

Application in heating system Open and closed type

Fire door size (bxh), mm 210x210

Average burning time of one fuel load, hour 8

Boiler service life, years 10

Temperature flue gases, ºС up to 190

Maximum operating pressure, bar 4

Boiler weight, kg 145

dimensions(HxWxD), mm 800x430x740

Efficiency,% 82 - 92

High reliability

The standard delivery package for the Bourgeois-K STANDARD-10 boiler includes: a smoke outlet pipe (horizontal), a grate, a user manual and a warranty card. You can also purchase a separate additional kit for the Bourgeois-K STANDARD-10 boiler: a smoke exhaust pipe (vertical), a boiler maintenance kit, a safety group and an automatic draft regulator. This model meets the requirements of standards and regulatory documents operating in the territory Russian Federation and passed declarations in the system technical regulations Customs Union “On the safety of machinery and equipment” TRTS 010/2011.

floor-standing non-volatile solid fuel pyrolysis single-circuit boiler with an open combustion chamber

About delivery

• Delivery is carried out on weekdays from 12:00 to 18:00 Moscow time
• Delivery outside the Moscow Ring Road is 50 rubles/km and is paid according to the actual distance traveled by the vehicle. We recommend finding out the exact distance using the Yandex.Maps service
• Delivery over a distance of more than 130 km from Moscow is carried out through transport and logistics companies
• Delivery on weekends holidays, urgent delivery same day, order delivery at exactly the specified time is carried out at increased rates and after agreement with the store
• When the order is delivered by truck, the goods are unloaded by the Buyer
• Approximately 1 hour before delivery, the forwarder contacts the Buyer. If it is impossible to confirm the acceptance and delivery of the order to the designated address, delivery is canceled
• Pickup is carried out after the store confirms the movement of the goods to the point of delivery of the order.
• The forwarder does not advise on issues technical parameters And functional features goods, their compatibility, cost, etc. This information can be obtained by calling our office at contact numbers
• Our vehicles deliver orders along pre-planned routes according to a schedule that provides high accuracy. Therefore, we ask you to understand that unloading, checking and payment for goods must be completed within 10-15 minutes

About payment

• We accept payment for goods only in rubles for cash or bank transfer
• The price of the goods includes a VAT rate of 20%
• The order is sent to the regions of the Russian Federation through transport companies to the Buyer only after 100% prepayment
• The exact cost of payment is calculated from the cost of goods and the cost of delivery (outside the Moscow Ring Road, for urgency, for the exact delivery time) of the order. Please take this into account

Installation

Our company’s specialists carry out a paid visit to the site, and the cost of the visit is returned upon conclusion of the contract; on the spot, they agree with you on the terms, stages and scope of work, and select equipment and components.

After concluding the Agreement and making an advance payment at the appointed time, delivery, installation and commissioning of equipment is carried out. Upon completion of the work, Certificates are drawn up and full payment is made.

Prices for visiting a specialist and installing equipment can be found here.

Service and repair

At your request, the company is ready to enter into an annual contract with you service maintenance. The advantage is an extended warranty for work performed and preferential servicing of equipment.

If such an Agreement has not been concluded, you can contact the specialized service centers using the link.

Series "Standard"

The basic principle of operation of the boiler is the orderly, separate combustion of both solid fuel and the pyrolysis gas released from it. With limited access to oxygen, solid fuel is pyrolyzed, and the gas released enters a special afterburning chamber, mixing there with heated secondary air.

The process of gasification of solid fuel and the design features of the boiler allow the processes of fuel combustion and heat transfer to proceed most efficiently due to:

• continuous natural supply of oxidizer (air) in sufficient quantities and the necessary mixing of the burned fuel (solid or gaseous) with it, both in the lower combustion space in order to optimize the pyrolysis process, and in the upper combustion space with secondary heated air within the ignition concentration limits
• design features of combustion spaces,
• removal of combustion products after cooling due to natural traction,
• using the most effective design principle of washing heating surfaces, at certain speeds and directions of movement of the coolant, providing a high heat transfer coefficient sufficient to work in heating systems with natural circulation or using pump heating systems.

Achieving high efficiency indicators is possible with proper operation of the boiler and the correct selection of the chimney and its geometry. When using fuel with a moisture content of more than 20%, the calorific value of the fuel and, as a consequence, the boiler power decrease. Do not use fuel with a moisture content above 50% - it must be stored in a dry place.

The boiler is installed on a fireproof base (asbestos cardboard with a thickness of at least 5 mm and a metal sheet with a thickness of at least 0.5 mm) near fireproof walls, at a distance of at least 1500 mm from the front, 800 mm from the sides and 1000 mm from the back wall boiler Before firing the boiler, the floor must be covered metal sheet with dimensions 1200x700 mm.

The boiler service life is 10 years.

A pyrolysis boiler is a real godsend for those who live in private houses and dachas where there are frequent interruptions in the supply of gas and electricity. This unit is completely autonomous and does not require connection to either electrical or gas distribution networks. The device has already earned wide popularity and recognition due to the fact that it is optimally suited for working in the Russian climate.

The modern stove "Burzhuy-K" is essentially similar to the famous potbelly stoves of the beginning of the last century. You can use any solid fuel as fuel for the stove - wood, coal, pellets and briquettes, depending on which fuel is more accessible and cheaper in your case.

But the working principle of this device fundamentally different from other solid fuel boilers. During the operation of the boiler, combustion products saturated with carbon monoxide, since the design provides for a system for their afterburning.

By design, the device is a one-piece unit consisting of a two-chamber firebox and a water circuit. Built-in temperature sensor allows precise installation temperature regime with an error of up to 3 degrees. One load of fuel is designed for 15 hours of operation of the device.

Delivery Card

Delivery in Moscow within the Moscow Ring Road

The cost of delivery of goods by our autocourier is from 1500 rubles.

Delivery in the Moscow region

In the Moscow region from 1500 - 5000 rubles.
To other regions 45 rubles per kilometer.

Attention!!!

Delivery of goods on Fridays, Saturdays and Sundays is cheaper. Due to the specifics of our products, our customers ask for delivery to be made on WEEKENDS “while everyone is at home”, we collect orders and the driver can close up to 10 points per day. Contact our managers for details.

Note!

The cost of delivery in Moscow and Moscow Region includes driver assistance when unloading goods from the back of the car. If necessary, you can arrange for an additional loader to carry the goods at a cost of 2,000 rubles.

Delivery to other regions of Russia

Delivery of our products to other Russian regions can be carried out with the involvement of our partners - transport companies. Delivery to the regions is carried out according to the following scheme:
The buyer places an order for the product.
Within 48 hours after receipt of money for the goods, our company makes the shipment to the transport company, after which the customer is sent a bill of lading number, by which you can easily track the movement of the order.
Upon arrival of the cargo in the customer’s city, the operator of the transport company contacts him, informs him of the delivery cost and agrees on a convenient time for delivery of the goods or pickup. You can find out the exact cost of delivery to your city on the transport company’s website by entering the dimensions and weight. We actively cooperate with PEC http://pecom.ru, Business Lines http://www.dellin.ru/ (recipient's passport details are required when filling out) or any other companies of your choice.

Pickup

We offer self-pickup of products from our warehouse at the address: Moscow, Bulatnikovskaya str. 20, entrance No. 2.
Pickup and loading of goods is free of charge.

Note!

When self-delivering products on the buyer’s transport, we strongly recommend that you study the corresponding drawing on the website in detail and carefully measure the parameters in advance doorways your car. This must be done to avoid damage to the car interior, since due to the complex geometry and protruding parts of the 0.5–4 mm product, it is very difficult to carry the product into a too small doorway of a passenger car!
Loading of products using a forklift is carried out in trucks on weekdays from 9:00 to 18:00. Our company delivers goods with an accuracy of up to half an hour, provided that the customer provides complete and accurate information about the time of delivery of the car one day before.