Bathtubs made of acrylic, due to their excellent physical parameters and wide price range, are in wide demand among consumers. But unlike enameled metals, acrylic is more demanding in terms of care products. After purchase, any user is faced with the question of how to clean it. acrylic bath at home, because if improperly maintained, the coating can be irreversibly damaged and the product will have to be disposed of.

When choosing a cleaning product for acrylic bathtubs (liners), consider chemical substances, sold in retail chains specifically for care purposes or used in everyday life. It is useful for the user to know the methods and reagents used to clean bathtubs from various contaminants: rust, hardness salts, dyes, silicone sealants.

Synthetic acrylic, like other popular polymers (PVC polyvinyl chloride, PE polyethylene), is characterized by the fact that there are some chemicals that have a negative effect on it. Therefore, you should know which materials and components should be completely excluded when caring for an acrylic bathtub. This list includes:

Abrasive substances. Cleaning acrylic bowls with household chemicals containing small particles of abrasives (Pemolux powder, caustic and baking soda in dry form) leads to scratches on their surface, resulting in loss of shine and aesthetic appearance - the glossy bowl becomes matte. In addition, a rough surface after using abrasive materials absorbs dirt much better and is more difficult to clean in the future. You should not rub the acrylic bathtub with hard synthetic brushes - they increase the roughness of the walls and make it difficult to further care.

IN Lately In everyday life, the Chinese melamine sponge, which works on the principle of an eraser, erases any dirt, is very popular among housewives. Since the hard fibers of melamine have an abrasive effect on materials, acrylic bathtubs should not be cleaned with a sponge.

Household chemicals. Some popular household cleaning products for sanitary appliances (Santex, Sanfor) or bleaches (Belizna, bleach) contain chlorine, which has a mild Negative influence on the acrylic coating, causing the gloss to fade. Due to the low concentration of aggressive chlorine and the short exposure time, the use of these compositions does not cause too noticeable damage, but it significantly exceeds the benefit from the use of chlorine-containing components.

Clean acrylic is not damaged by commonly used household products such as gasoline, ammonia, alkalis, sealant, and silicone lubricants, but it is better to avoid contact of these substances with the bathtub, since there is not always a guarantee of purchasing a high-quality bowl.

Acrylic solvents. Technical acetone, popular in everyday life, when it comes into contact with the gloss of the bowl, partially dissolves the acrylic with the formation of a cloudy coating on the surface; with prolonged exposure, it gradually dissolves the polymer. Acrylic can be damaged by high concentrations of hydrofluoric acid, hydrocyanic acid, nitric acid, chromic acid and sulfuric acid; the damage depends on the time of contact of the materials.

The worst enemies of sanitary acrylic are its solvents: ketones, chlorinated hydrocarbons (chloroform, methylene chloride, dichloroethane), esters and aldehydes, alcohols (methyl, propyl, butyl, ethyl). Excellent dissolution of acrylic adhesive for PVC CosmoFen containing vinyl chloride polymers.

Household chemicals

The retail chain sells a wide range of products for the care of acrylic surfaces, their distinctive feature— Acrylic inscription on bottles or containers. Consumers are well aware of such brands as Bass, Sif, Zolushka, Chister, Ravak, Akrilan, Sanox, Silit, Tim-Profi, produced in the form of gels, pastes or spray liquids.

The packaging of each composition contains instructions for use, the standard cleaning method is applying (spraying) onto the bowl and washing off the deposits warm water some time later. Most popular gels are squeezed onto a rag (sponge), spread over a bowl, left for 15 minutes, and removed with hot water, then wiped dry.

Folk remedies for cleaning acrylic baths

Due to the low cost, availability and wide range of household chemicals, the use of traditional methods for cleaning baths is not as relevant as in the days when acrylic plumbing first entered the retail chain. However, the desire to outstrip industrial chemicals in efficiency or save money by using cheap homemade components still haunts many owners. Thanks to their ingenuity, the following methods for cleaning acrylic bathtubs with household substances are recommended:

Lemon acid. Used for cleaning painted bowls from hardness salts and yellowness clearly visible on their surface. To use citric acid, a packet of powder is diluted in approximately 0.5 liters of water, ready solution pour into a household spray bottle and moisten the surface of the bowl with liquid in places where plaque appears. The operation is repeated several times; upon completion of the procedure, the citric acid is washed off with hot water from the shower head.

Soda and vinegar. This combination is a universal household method for cleaning any surfaces, from metal utensils, frying pans, gas and electric stoves, sewer pipes, and ending with plumbing equipment. To eliminate rust stains or other dyes, pour baking soda onto the area to be cleaned and spray with 9% vinegar essence from a household spray bottle. At the end of the cleaning work, the plaque is washed off with hot water.

Toothpaste. You can use toothpaste (not gel) to remove rust marks from an acrylic bowl by applying it to an old toothbrush and rubbing it into the stain. If the entire bathtub has lost its shine, you can return it to its original state by rubbing the paste over the entire surface; to do this, apply it to a cloth and rub it into the bowl for a certain time. In this case, the paste plays the role of a component that erases microscopic irregularities, which is used when polishing various materials.

Salt and vinegar. To prepare the cleaning composition, add 25 mg of table salt to 100 ml of vinegar, stir until completely dissolved and heat to a temperature of 60 °C. The solution is sprayed onto dirty places and rub in with a soft cloth or sponge; upon completion of work, the composition is washed off with hot water.

Soda and soap. Soda is poured into soapy water, the resulting solution is applied to contaminated areas after 20 minutes. The composition is washed off with hot water.

A mixture of ammonia and hydrogen peroxide. The liquids are mixed in a ratio of 2:1 (50 g of hydrogen peroxide is poured into 100 g of ammonia), after which a sponge and napkin are moistened with the solution and the acrylic bowl is wiped in contaminated areas. This is usually how they are removed rust spots, and due to the fact that strong chemical components are used, it is necessary to work with rubber gloves. It should be noted that this method is the most effective among other home methods and is often recommended on the Internet.

Review of popular bath cleaners

To combat various types against pollution, it is safer and more effective to use household chemicals sold in retail chains - they allow you to get a more pronounced effect than homemade solutions. The vast majority of products sold are designed to simultaneously get rid of traces of rust and limescale, so it is quite difficult to find a cleaning product for acrylic bathtubs that removes only one of the listed contaminants.

The following brands are in good demand on the market for eliminating rust stains and hardness salts and have proven themselves to be excellent:

Bagi Acrilan— the products of the Israeli brand Bagi are always different high efficiency in comparison with analogues, the cost of Bagi is correspondingly higher. Acrylan is supplied in plastic container with a spray bottle, when cleaning it is sprayed in the form of thick foam - this allows the composition to adhere well to smooth surfaces vertical walls. Due to its high aggressiveness, cleaning time takes no more than a minute; it is not necessary to use a sponge or cloth when working.

In addition to lime and rust stains, foam decomposes dirt, soap stains, old stains, fungus and mold, renews the surface and gives it gloss, and prevents further contamination. Bagi Acrilan contains surfactants, organic acids, stabilizers, solvents, 400 ml bottles are enough for 25 cleanings, the price of foam is from 350 rubles.

Meine Liebe is a German trade brand, its composition includes nonionic surfactants, sulfamic and phosphoric acids, trisodium alaninate. The drug is applied through a sprayer and forms foam on top, dissolves lime, rust stains, soap stains and dirt, after exposure to the acrylic a film is formed that stops subsequent contamination. It has a delicate effect on the surface and is easily washed off with water; immediately after using Meine Liebe, the child is allowed to bathe. The cost of a 500 ml container of the drug is from 200 rubles.

Unicum spray— characterized by a high concentration of surfactants, which contributes to the economical consumption of the spray, removes hardness salts, fungus, mold, rust stains, and traces of soap. After application, it is washed off well; the nanolayer formed during spraying further prevents contamination. The cost of a container with a volume of 750 ml is from 300 rubles.

Sanfor Acrylight— designed for treating Jacuzzis with hydromassage, steam cleaners, shower cabins, effectively removes old dirt, traces of soap and hardness salts. After use, it creates a protective film that gives the surface gloss and facilitates further maintenance. Supplied in the form of a gel or spray foam, the cost of a 920 g container with gel is 120 rubles.

Cif cream Active- popular cleaner domestic production to clean any surfaces from lime and traces of rust, the microgranules in the composition allow you to cope with any difficult stains. The cost of 500 ml of cream does not exceed 100 rubles.

Cillit Bang— the main component of the composition is hydrochloric acid; the Cillit line contains universal reagents suitable for cleaning acrylic bathtubs. They cope well with hardness salts, rust, stubborn dirt, and stains. The cost of a 750 ml container of Cillit bang spray starts from 300 rubles, cheaper analogues are available for sale, 500 ml from 140 rubles.

Comet— the line of well-advertised products recently added the universal Expert spray, designed to clean acrylic from lime and rust and has antibacterial properties. Comet contains phosphoric and formic acids; the entire line has different scents with a predominance of lemon, so in addition to cleansing, Comet effectively eliminates odors. The cost of a 500 ml container is from 140 rubles.

Chistin Sanitary- included in the domestic budget funds includes a mixture of acids of organic and inorganic origin. Chistin effectively removes rust stains and hardness salt deposits, has antibacterial properties and fights odors. A container with a volume of 500 ml can be purchased for 50 rubles, while Sanitary Chistin is not much inferior to its more expensive and advertised analogues.

The widely advertised Domestos gel for working under the toilet rim is popular among consumers; many of its owners ask the question: is it possible to wash an acrylic bathtub with Domestos?

As can be seen from the above list of the best rated products for maintaining acrylic containers, Domestos is not included in it and this is due to the presence of sodium hypochlorite in its composition, which is a strong oxidizing agent. Hypochlorite itself consists of 95.2% active chlorine, which is harmful to acrylic, so Domestos is contraindicated for acrylic bowls due to the high probability of damage to their surface during prolonged exposure.

Sometimes, when carrying out repair work, it gets on the bowl, and chemical reagents - white spirit and acetone - are better suited for removing it. In order not to take risks, it is safer to abandon chemicals when eliminating silicone - it is easily separated from the acrylic surface mechanically if you use any non-solid object for these purposes - wooden or plastic plate, rough fabric.

The plastic of an acrylic bowl is softer and therefore more susceptible to mechanical stress; acrylic is also afraid of contact with some chemical reagents in which it dissolves. These factors influence the care of an acrylic bathtub at home and the rules for its operation. Many users may find the following tips useful:

• After washing, the bathtub is rinsed and wiped with a dry cloth - this prevents drips when water droplets dry.
• Every week, it is recommended to thoroughly sanitize the bowl and surrounding walls using an acrylic bathtub cleaner. You can wash the bathtub with any dishwashing liquid like Fairy or a soapy sponge, then wipe it dry.
• Once every six months the bowl should be disinfected; to do this, fill it with water and add a disinfectant composition (Ravak, Tim Profi), and let the water stand for 20 minutes. and then drained.
• Acrylic is easy to scratch, so it is not recommended to place basins or metal buckets in the bathtub.
• When bathing pets (dogs, cats), you should avoid contact of their claws with the bowl.
• For noticeable scratches and persistent stains that cannot be eliminated with chemicals, the damaged area is cleaned with fine sandpaper and then polished using special materials and pastes. Since polishing work requires professional skills, knowledge of technology and the availability of special devices (materials), it is better to entrust such operations to a specialist.
• With a long service life, the inner surface of acrylic bathtubs loses its gloss and becomes matte, while it gets dirty faster and more intensely, it is more difficult to care for, and the procedure causes increased consumption of cleaning gels and sprays. In this situation, you should think about polishing the entire surface of the bowl - this will improve the appearance, extend the service life and reduce the consumption of materials for cleaning.

Unicum - instructions for use

When deciding what to use to wash an acrylic bathtub at home, they opt for traditional cleaning methods or household chemicals, a wide range of which are sold in the retail chain. Of the self-made reagents, the most effective is considered to be a mixture ammonia and hydropyrite, recommended on many Internet portals.

Expensive and advertised cleaning compositions do not always correspond in quality to their price, good result can be achieved using domestic budget drugs (Cinderella, Chistin Sanitarny), the cost of which is several times lower than their known analogues.

How to wash an acrylic bathtub so that it does not change its appearance, serves for a long time and pleases the eye with its unsurpassed appearance. In view of the fact that acrylic bathtubs appeared on our market quite recently, many people ask themselves the question - what products should be used to wash such bathtubs and how to handle them correctly. There are no big difficulties in the procedure of washing an acrylic bathtub. The main thing here is to follow the cleaning rules.

We are all accustomed to bulky and heavy cast iron bathtubs, and acrylic bathtubs, which are elegant in shape and quite light, at first glance seem fragile and impractical. That is why many people are wary of plumbing fixtures made of acrylic.

Features of washing and caring for an acrylic bathtub

Unfortunately, many people still do not know the basic rules for caring for acrylic. It is worth noting that the surface of an acrylic bathtub requires more careful care and therefore you should familiarize yourself with a number of rules for caring for this material. By following basic care rules, you will be able to prolong the impeccable appearance of your bathtub.

Acrylic is a wear-resistant material. Its surface has a dirt-repellent effect, so microorganisms do not develop on it. In addition, an acrylic bathtub is not afraid of impacts, but it is easily scratched.

Features of washing an acrylic bathtub. The main thing is to be careful and careful when washing an acrylic bathtub. It is not recommended to use powdered and abrasive products, as well as pastes containing chlorine, acid, alkali, and ammonia as a cleaning product. Such substances contribute to the appearance of scratches on the surface and also lead to loss of natural color. Before you start cleaning your acrylic bathtub, always carefully read the composition of the cleaning product you are using. Do not use metal or hard brushes - such brushes will damage the integrity of the acrylic coating.

It is also not recommended to bathe your pets in an acrylic bathtub, or to place metal basins and buckets in them. Never place various objects in the bathroom - stools, metal basins and objects, as well as any other household utensils.

What means can you use to wash an acrylic bathtub?

To properly care for an acrylic bathtub, you must use a liquid with a cleansing effect as a cleaning agent. Dishwashing composition, liquid soap, shower gel, etc. are perfect for this purpose.

If you find streaks of lime on the surface of the bathroom, it is not necessary to wash the entire container completely. It is enough to take a soft cloth, moisten it in lemon juice or table vinegar and wipe the surface.

If you notice that some areas of the bathroom surface are beginning to darken, then just rinse the container running water and wipe with a dry and soft cloth.

If minor scratches occur in the acrylic bathtub, its surface can be treated with a polishing material, in particular it can be ordinary mastic. Furniture polish or car polish is often used for this purpose.

Special products for cleaning acrylic bathtubs

The current level of development of the chemical industry has made it possible to develop special means thanks to which an acrylic bathtub can retain its original appearance for a long time. Moreover, with such products, any acrylic container is washed quickly and safely. I would especially like to highlight such products as Akrilan, Cillit, Sarma, Acryl-Net, Star-Acrylat.

These cream-gels are specially designed for washing acrylic surfaces. The product is applied to a napkin and only then on the surface of the bath. Wipe the entire surface of the container with a napkin and leave for 5 minutes. After 5 minutes, the product should be rinsed well with warm water and wiped dry with a cloth.

You can also use universal products to clean acrylic bathtubs. The most popular universal cleaner for acrylic surfaces is the product from Ravak. It is developed using special technology and is intended for washing acrylic surfaces.

To effectively get rid of rust, it is recommended to use products that are designed to combat rust specifically from acrylic surfaces.

In any case, when choosing a cleaning product for an acrylic bathtub, always give preference to special products. Such products will not only carefully clean the surface, but will also give it shine and protection in the form of a thin waterproof film. Now you already know how to wash an acrylic surface and you can provide it with proper care and increase its service life.

How to wash an acrylic bathtub - tips for washing with improvised and special means Video

How to wash an acrylic bathtub so that it remains snow-white for as long as possible and does not change its appearance. Various tips and subtleties of caring for an acrylic bathtub will be discussed in this article.

How and what is the best way to wash an acrylic bathtub at home?

Acrylic bathtubs have won the love of housewives all over the world with their smooth surface, glossy shine and impeccable whiteness. Lighter plastic models of various shapes and sizes have successfully replaced clumsy cast iron washing containers.

Happy owners of acrylic plumbing fixtures often wonder how to clean a hot tub in order to preserve the original appearance of the product for a long time. In fact, you should be careful in this matter, since not every cleaning product is suitable for mechanically fragile plastic. In this article we will tell you how to care for an acrylic bathtub so as not to spoil it.

Advantages of acrylic

Many homeowners are concerned about the question of how to clean an acrylic bathtub, since they have heard a lot about the capriciousness of plumbing equipment made from this material. In fact, acrylic products are much easier to care for than steel or cast iron wash containers.

The ease of cleaning is explained by the following properties of the polymer:

• Low porosity. There are practically no pores on the acrylic surface, so it does not absorb dirt, but repels it, so daily cleaning of an acrylic bathtub can be done simply with warm water and a soft cloth.
• High smoothness. The smooth surface of acrylic does not allow dirt and harmful microorganisms to become embedded in the structure of the material, so it is easy to clean the bowl even without the use of abrasives. detergents.

Note! Manufacturers often talk about the “self-cleaning effect” that they have quality products made of acrylic. This term means that their nasty surface repels dirt, so you have to clean the bathtub less often. In most cases, you can wash an acrylic bathtub with warm water or soapy water.

Typical contaminants

Since polymer plumbing fixtures have replaced cast iron and steel fixtures relatively recently, the question of how to clean an acrylic bathtub at home is relevant for many responsible housewives. Acrylic products repel dirt, however, intensive use of the device leaves its mark, deteriorating the appearance and hygiene of the washing container. Most often, the following contaminants occur during the use of a bath:

1. Yellowness. Acrylic, unlike the enamel of steel plumbing fixtures, does not turn yellow over time. However, what to do if the acrylic bathtub turns yellow? The answer is simple - wash the bowl using a special product, and also improve the quality of tap water, since most often this is where the problem lies.

Important! Properly caring for your plumbing fixtures so that old stains do not appear on them is much easier than washing an acrylic bathtub. Therefore, it is important to regularly rinse the inside of the bowl with warm running water and then wipe dry with a soft cloth after each use.

Many housewives do not know how to clean an acrylic bathtub, so they use completely inappropriate products that corrode, scratch or otherwise damage the product. Improper maintenance is the most common cause of premature wear sanitary products made of acrylic. Manufacturers recommend not using powders to clean such bathtubs; instead, it is better to use a delicate, gentle washing gel or cream. To care for acrylic plumbing, 4 categories of cleaning products are used:

• Cleansing gel. These products are used to clean acrylic bathtubs from yellowness, limescale, rust and other deep contaminants. The packaging must contain information that the gel composition is suitable for acrylic. Such brands as “Akrilan”, “Mister Chister”, “Ravak” have proven themselves well.

Please note that if you are not sure what product to use to wash your acrylic bathtub, it is better not to take unnecessary risks. It’s better to try what effect the composition will have on small area surface, and only then continue cleaning the product.

"Forbidden" techniques

High quality acrylic plumbing fixtures are a godsend for modern housewives who save time on everything they can. With proper use, it retains its whiteness and shine even without use. special means. However, washing an acrylic bathtub with the wrong household chemicals can ruin the product. Manufacturers recommend not to use for care:

• Hard brushes. Brushes with metal elements or hard bristles leave scratches on the soft acrylic surface, which significantly spoil the appearance of the hot tub and also cause further destruction.

Prevention

An important measure to combat contamination on the surface of acrylic bathtubs is proper care in compliance with the manufacturers' recommendations. Using the product correctly is much easier than washing an acrylic bathtub at home. Compliance with these 4 simple rules significantly extends the service life of plumbing fixtures:

Remember that by using a low-quality or unsuitable product to clean an acrylic bathtub, you are not getting rid of dirt, but of expensive plumbing fixtures!

How and with what to clean an acrylic bathtub at home

What is the best way to clean an acrylic bathtub at home without damaging it? Typical stains, recommended products, “prohibited” cleaning methods, prevention.

How to clean an acrylic bathtub, with what products?

Acrylic bathtubs have recently become popular and have taken the place of previously widely used cast iron structures. This product captivates with its lightness, as well as its sophisticated shapes. But at the same time, quite often the owners of such plumbing equipment do not know how to clean an acrylic bathtub so as not to harm its appearance.

What is acrylic?

For the manufacture of acrylic bathtubs, plastic is used, which is characterized by significant hardness and wear resistance. The surface of such products has a dirt-repellent effect, which prevents the development of harmful microorganisms. This material has been widely used in the dental field in the past. Thanks to new technologies, its price has dropped significantly. Therefore, the material began to be actively used in the production of plumbing fixtures.

Acrylic bathtubs are impact resistant but subject to small and minor scratches. Their high-quality cleaning depends not only on which cleaning agent was chosen, but also on compliance with basic recommendations for caring for acrylic. In order for the bath to serve for a long time and not lose its whiteness and integrity, you should not bathe pets in it, or store basins and buckets in it. Metal objects and other utensils can damage its surface, leaving noticeable scratches.

Daily care of an acrylic bathtub

An acrylic bathtub does not require special care. It is enough to rinse it after each use with clean running water, without using aggressive cleaning agents. For acrylic bathtubs, you can purchase special “chemistry”. Of course, they also effectively fight pollution, but they are not cheap. In addition, it is not recommended to constantly expose the acrylic surface to chemical cleaning.

Many people do not know how to clean an acrylic bathtub. It turns out that to carry out such cleaning, it is enough to purchase a soft cloth or sponge. It is also necessary to use soap or a special detergent for acrylic products. For daily care, it is enough to clean the surface of the bathtub with a soapy sponge to remove possible contamination. You can even simply rinse it with clean running water and completely remove the moisture. With this care, no traces of rust or plaque will appear on the surface.

If such contamination does occur, then how to clean the acrylic bathtub in this case? If usual ways do not help, you need to choose special cleaning products.

What care products should I use?

Before we tell you how to clean an acrylic bathtub at home, we note that you need to remember some important rules. It is important to be careful and careful when processing the product. Avoid using cleaning products that contain abrasive elements, as well as pastes and powders containing ammonia compounds, chlorine, alkali and acid. You need to know that such substances can damage the outer coating of the acrylic tank, cause small cracks and scratches, and cause loss of color. Therefore, before deciding how to clean an acrylic bathtub, you should carefully read the composition of the powder or paste. Stop using metal brushes. Cleaning tools that are too hard cause scratches and damage the finish.

Cleaning Products Review

Every housewife thinks about how to clean an acrylic bathtub. Fortunately, there are currently a huge number of special tools. "Acrilan" is a cleaning foam that easily removes Various types contaminants (soap stains, limescale, rust). The product can easily cope with all types of stains. The advantage of this product is the formation of a protective film on the acrylic surface, which prevents further accumulation of plaque. But never leave the foam on the surface of acrylic products until it dries completely, and also do not mix it with other products. Use gloves during cleaning. Keep away from children.

Cif is an optimal cleaning product that is suitable for caring for all sanitary ware. The composition does not contain abrasive substances. Therefore, the acrylic surface is not in danger of losing its shine and integrity. The product is available in several forms - cream, paste, spray.

Bass is a liquid for cleaning bathroom fixtures. Suitable for daily use.

"Tim-Profi" is a detergent intended for cleaning acrylic surfaces. Among the main advantages are environmental friendliness, the ability to destroy unpleasant odors, and remove significant contaminants. The product gives the cleaned surface shine and also forms a special protective layer.

"Cinderella" - effective drug for cleaning acrylic products. An ideal option for those who cannot decide what to use to clean an acrylic bathtub. Among the disadvantages is the pungent odor that appears directly upon spraying. During processing, it is recommended to use not only gloves, but also a mask. The product must be sprayed onto the surface of the acrylic bath and left for 7 minutes. After the specified time, rinse the drug with running water and wipe the bath with a soft cloth.

"Chister" is a cleaning product for acrylic bathtubs, which is also suitable for other sanitary ware. Ideally removes limescale, rust, grease stains and soap stains, gently cleans the surface without causing mechanical damage. The composition of the drug includes acrylic polymer, which acts as a barrier to further adhesion of dirt to the bathtub. The product protects against the appearance of fungi and bacteria. The bathtub will delight its owners with cleanliness in just a couple of minutes.

So, we have discussed how you can clean an acrylic bathtub. let `s talk about possible ways use of detergents. Familiarize yourself with the basic rules for using cleansing products. Usually the manufacturer places recommendations directly on the packaging. The basic rules of application are:

Folk remedies for caring for acrylic bathtubs

If there are no detergents and you don’t know how to clean an acrylic bathtub at home, feel free to trust people’s advice. Such products do not have negative properties and do not harm health:

What do the owners of this type of plumbing say? How to clean an acrylic bathtub? Reviews on this matter are very different. However, regardless of whether you read a positive or negative comment, it is worth knowing that all products meet the qualities declared by the manufacturer. It is important to choose the optimal detergent that is suitable specifically for your bath, taking into account the features and characteristics of the water. The effectiveness of the product depends on the frequency of use. For example, if the surface is heavily soiled, you may need to use the product twice to achieve a perfectly clean surface. Taking into account all the above information, you can easily determine which product to use to clean an acrylic bathtub so that the product lasts a long time.

How to clean an acrylic bathtub, with what products?

Acrylic bathtubs have recently become popular and have taken the place of previously widely used cast iron structures. This product captivates with its lightness, as well as its sophisticated shapes. But at the same time, quite often the owners of such plumbing equipment do not know how to clean an acrylic bathtub so as not to harm its appearance.

How to wash an acrylic bathtub at home: TOP 5 ways to clean it, what brushes and sponges to use

Housewives often face the problem of how to wash an acrylic bathtub at home? The walls and bottom are sensitive to abrasive substances, so a product chosen at random will not work. The purpose of the article is to tell about the basic rules and methods of cleaning, to give practical advice and recommendations:

• characteristics of cleaning products, their features;
• cleaning options - what they are, the main differences;
• Tips for caring for and extending the service life of your bathtub.

Acrylic is a wear-resistant material, a type of plastic that comes from a group of synthetic derivatives of one of the unsaturated organic acids.

What should you know about the characteristics of acrylic bathtubs before cleaning them?

Before answering the question of how and what to wash an acrylic bathtub, let’s talk about the material used. Acrylic has a dirt-repellent effect: microorganisms, bacteria and fungi do not develop in the bathtub. The material is durable and resistant to impacts. A noticeable disadvantage is that it is easily scratched and subject to wear.

The main difference is exposure to abrasive and chemically active components. Like plastic, substances with high alkalinity or acidity lead to degradation of the structure, and abrasives scratch the surface, leaving deep grooves.

It is important to be careful when washing. Do not buy abrasive compounds, pastes with ammonia, chlorine, acids and alkalis. Powdered products are harmful, leaving damage and scratches. Brushes (metal and with hard bristles) are contraindicated for use.

What brushes and sponges to use

For cleaning, use soft cloths or sponges. Cloth napkins are also used. They are moistened in special solutions (we will talk about them later). After washing, it is wiped dry and treated with polish.

If possible to buy special sponge no, use soft-lined cloths, such as microfiber. If necessary, use a regular cloth - the main thing is that there are no abrasives on the surface.

How to clean an acrylic bathtub at home: TOP 5 ways

We have selected several options for you on how to clean an acrylic bathtub at home:

Detergents

Adequate and in a simple way The use of special detergents is considered. Their cost rarely exceeds reasonable limits. For correct selection make sure there are no abrasives. Often the ingredients are indicated on product packaging, or special notes are made.

Acrylic bathtub cleaner used for small and large cleaning volumes. Appearing stains are removed using:

• Cif– for bathtubs, sinks, tiles and toilets. The composition does not contain abrasives, which is safe for acrylic. The reasonable price and variety of composition types (spray, paste, cream) make it a popular product among buyers. After cleaning, a film appears that protects it from further formation of limescale.
• Akrilan– foam for baths and showers. When using, leave only until completely dry, without rinsing.
• Bass– cleaning product, used daily. Sold in liquid form.
• Tim-Profi– an environmentally friendly product that helps fight unpleasant odors, effective for heavy soiling.
• Cinderella– a popular substance that emits a pungent odor, so when spraying (sold as a spray), wear gloves and a special mask.
• Chister– a composition for quickly removing dirt, promotes the decomposition of stains and grease stains. Consists of a polymer that protects against fungi.

In addition to those listed, allowed Use of the following products is at your own risk:

Citric acid solution

Citric acid is an organic acid with a relatively high pH - a solution indicator. The materials perfectly remove plaque, grease and other contaminants. Organic acid is especially effective in affecting ordinary substances, so it is easy to clean off fat with its help. IN pure form it has an adverse effect on acrylic, because mix into solution:

1. Fill ⅔ full with warm water;
2. Pour out half a liter of acid;
3. Mix the consistency and leave overnight;

The method is effective, but aggressive towards acrylic, and it is not recommended to carry it out more than 0.5 years.

After standing for about 12 hours, the solution descends. Citric acid should be stirred more thoroughly than vinegar - completely dissolve it for further precipitation. Finally, the structure is washed with a stream of water from the shower and wiped with a soft cloth. Rub additionally to add shine.

Apple vinegar

A practical substance, but it does not always have a positive effect on acrylic. The main feature is low pH and high acidity. For a material, this factor turns out to be critical, especially if there are scratches. You should work quickly and carefully. The recommended method is to generously soak a cloth in the solution, apply it to the stain and pour water on it.

We recommend using this method at least once every six months.

Regular soda removes plaque. The composition has a highly alkaline environment that breaks down fats and strong compounds. In most products it is present in the form of compounds or in its usual form. There are two types: food and calcined.

Use this method once every 3-5 months.

Baking soda is a weak alkali, while calcined soda is a strong alkali, with a powerful abrasive effect. Use only baking soda.

• Place 2-3 tablespoons of baking soda on a plate;
• Pour a glass of water;
• Wet the soft side of the sponge with the solution;
• Apply the mixture by dabbing rather than rubbing;
• After 15 minutes, rinse with water and clean with a cloth.

Never use undiluted baking soda! It has a strong abrasive effect and will damage the body.

If you need to leave the surface in its original form, use distilled or filtered water. In some cities, tap water contains large amounts of calcium, which reacts with soda to form fine sand-like particles. Using water will get rid of it. The advice is also relevant for other cleaning methods involving the use of chemically active substances.

Toothpaste

Acrylic came to plumbing from dentistry - it was used for lining the frames of dentures and making crowns, so cleaning the bathtub with toothpaste is quite acceptable.

The procedure should not be carried out more than once every two months.

Buy non-abrasive pasta. The manufacturer may not indicate this on the packaging. Abrasive particles are similar to small grains of sand that remove plaque from teeth, but they will greatly damage the surface of the bathtub. Before use, squeeze a small amount of paste onto your finger and rub it - the sand is immediately noticeable.

How and with what to wash an acrylic bathtub: TOP 5 methods!

How to clean an acrylic bathtub at home: the best ways, what products and brushes to use, what not to use.

In addition to dirt and soap scum, plaque often forms on the bathroom. Its intensity and color depend on the quality of tap water. White limescale is caused by an increased concentration of hardness salts, rust is caused by excess iron, and yellowness is caused by the content of tap water chlorine The problem of plaque can be solved by proper and regular care using traditional methods or special household chemicals.

Traditional methods of removing dirt and plaque are popular everywhere - many home remedies can actually cope with the problem quickly and without additional financial costs. But it is worth noting that it is easy to remove limescale and yellow deposits using home methods. Rust is much more difficult to remove, and if it is old, you cannot do without household chemicals.

Homemade recipes for limescale

Liquid soap

A common option for everyday product care. Using a soft sponge, treat the bath with the product and rinse with water. This is enough to remove daily dirt and keep the surface clean. You can also wash your acrylic bathtub with washing gel or dish soap.

Vinegar

Table vinegar dissolves lime deposits well. Used alone or in combination with citric acid, salt or soda. The main thing is that in the case of acrylic, do not use it in its pure form. 0.5 - 1 liter of 9% vinegar is diluted in a bathtub filled with warm water. Leave for several hours (but no more than 12), after which the solution is drained, and the bath is wiped with a sponge, rinsed with water and wiped dry.

Lemon acid

Citric acid powder is used in a similar way to vinegar, but must first be dissolved in warm water. For light whitening you will need 50 g of powder (this is 2 packs of 25 g each), for plaque removal - 100 - 200 g.

It is necessary to dissolve all the crystals so that they do not settle on the bottom of the bathtub. Freshly squeezed lemon juice applied to a sponge can be used to wipe off small yellowed areas.

Soda

Washing an acrylic bathtub with soda often causes controversy among professionals and on thematic forums. Baking soda effectively whitens and removes limescale, but as an abrasive substance it is of concern. In order not to harm the acrylic surface, you should soften the abrasive effect of soda: to do this, dissolve it in a bath of warm water and leave for 30 - 60 minutes. Then the solution is drained and the bath is rinsed with water. Another option: dilute baking soda with water to a paste-like consistency, apply for 15-20 minutes and rinse.

Folk remedies for yellowness

Laundry soap

A universal cleaner for all surfaces. Based laundry soap You can prepare a cleaning gel that effectively removes stubborn dirt and whitens yellowed areas. To do this, grate the soap and dilute it with warm water to a thick, uniform consistency. Add 1 - 2 tbsp. l. soda and mix well until it dissolves, apply with a sponge. The exposure time of the product is from 15 to 60 minutes.

Soda and mustard

Combine soda and mustard powder in equal parts, add warm water and stir until the soda dissolves. The resulting slurry is used to treat rusty and yellow areas and leave for 30 to 60 minutes.

Vinegar and hydrogen peroxide

Vinegar and peroxide are mixed in a 3:1 ratio and applied with a sponge or spray bottle. After 15 minutes, wipe the treated area with a napkin and rinse with water.

Toothpaste

Whitening toothpaste can be used to clean an acrylic bathtub from yellow plaque and fresh traces of dyes (for example, such stains may remain after hair dyeing). Rub the paste into problem areas with your fingers or a sponge, leave to act for several minutes and rinse with water.

Recipes for rust

Salt and lemon juice(vinegar)

Finely ground salt is mixed with the juice of half a lemon or 2 tbsp. l. vinegar until you get a paste. The composition is applied to rusty spots and left for a period of 15 to 60 minutes. You cannot rub the surface with this composition - it is washed off, and the remaining rusty deposits are removed with a sponge.

Hydrogen peroxide and ammonia

A solution of equal parts peroxide and ammonia can remove limescale and fresh rust. The action time should not exceed 10 minutes: ammonia in ammonia can harm the acrylic surface.

Special means

Industrial products for acrylic are presented in the form of liquid sprays, creams or gels.

Compositions suitable for acrylic can be found among consumer household chemical products and from manufacturers of branded sanitary ware. Professional products can not only remove stains and old plaque, but also return the bathroom to its original color.

Industrial products active against plaque and dirt of various origins:

Note: It is advisable to test any new product on a small area before use.

How not to handle acrylic

Acrylic is a durable polymer material and a bathtub made from it will last a long time if mechanical and chemical damage to the surface is avoided, namely:

1. Do not use aggressive cleaning agents based on chlorine, concentrated acids and strong alkalis (Domestos, Belizna, Pemolux). Due to chlorine, the bathtub may turn yellow, and caustic substances can destroy the acrylic layer and cause cracks.
2. Do not use hard brushes or metal scrapers for cleaning - they easily scratch acrylic. Polymers are characterized by a non-porous surface, so with proper care there is no place for dirt to accumulate and there is no need for rough cleaning. But when defects appear, dirt easily gets into the damaged areas.

How to remove scratches

If scratches do appear on the bathroom, they can and should be eliminated to avoid further damage to the material. Cracks, chips and defects that form when the surface is corroded by aggressive substances also require restoration.

Acrylic bathtubs are easy to restore, so minor defects can be removed at home. Scratches can be removed fairly quickly:

• the damaged areas are carefully sanded with sandpaper of different grain sizes (from coarse to fine);
• A special polishing compound is applied to the cleaned area and treated with a fleece or special cloth in accordance with the instructions.
  

  Note: Small scratches can be removed with a special polishing pencil for acrylic surfaces.

Serious defects can be eliminated using putty, liquid acrylic and polish. Often such work is entrusted to professionals, but if you wish, you can do it yourself in several stages:

• Use masking tape to separate defects from undamaged areas;
• cracks and chips are sealed with starting putty;
• after the putty layer has dried, the damaged areas are rubbed first with coarse-grained sandpaper, then with fine-grained sandpaper;
• if small unevenness remains, add a layer of finishing putty and, after it has dried, sand the surface again with fine-grained sandpaper;
• remove the masking tape and degrease the surface with alcohol;
• after all layers of putty have completely dried, a special paint is applied to the treated areas (its color is selected in accordance with the shade of the bathtub);
• Finally, polish is applied to the dried layer of paint.

For convenience, you can purchase a repair kit for acrylic bathtubs. The standard kit includes polish, a set of sandpaper of different grits and polishing cloth.

Step by step how to remove scratches is described in the video below:

Cleaning your hot tub

If hydromassage equipment is installed in the bathroom, weekly cleaning of the nozzles and regular disinfection of the system will be required. If it gets into the hoses lather, the remaining dirt and organic compounds begin to decompose and cause an unpleasant odor. When water circulates in the system, this dirt ends up in a common tank, which makes the bathing procedure unhygienic.

To fix the problem yourself, you can purchase special disinfectants for hot tubs. The bath is filled with warm water, an antiseptic is added and the hydromassage is started for 10 - 15 minutes. Then the water is drained and the bath is thoroughly washed to remove any remaining disinfectant.

Antibacterial solution Ravak Disinfectant for plumbing and hydromassage systems.

Note: Chrome whirlpool jets can only be cleaned with products designed for chrome surfaces. This should be taken into account when choosing a bath detergent. Otherwise, the chrome elements may darken or become stained.

At least once a year, it is advisable to contact specialists who will professionally disinfect and clean the hydromassage unit - including the filter and water supply system.

Bathroom care

Caring for an acrylic bathtub comes down to preventing persistent contamination and, as in the case of cleaning, not damaging the surface layer. To do this, it is important to observe the following preventive measures:

• Monitor the serviceability of taps, shower hoses and mixers: leaking plumbing is the main cause of rusty streams.
• Pay attention to the composition of cleaning products for faucets and shower heads that are mounted above the bathtub container or fixed above its surface. Drops of detergent will certainly fall on the surface of the bathtub and leave stains on it or cause damage to the acrylic layer if the active substance is aggressive.
• Do not exceed the exposure time of cleaning agents: after a long time, even acrylic-safe compositions can form undesirable reactions. Their most harmless consequences can be stains and discolored areas on the surface of the bathroom.
• Do not wash or soak laundry in acrylic bathtubs, especially in bleach solutions. Colored clothes may stain the container when washed.
• Avoid hitting the surface of the bathtub or dropping heavy objects on it.
• Do not place basins or other containers with hard bottoms or sharp edges in the bathtub.
• Do not burn the acrylic surface with curling irons or curling irons.
• Be careful when bathing animals: their claws can scratch the acrylic layer. Therefore, it is better to organize another place for this procedure or lay a rubber mat on the bottom of the bathroom.
• Do not pour into the bath bowl hot water, especially boiling water - it destroys acrylic, and the thin coating of a low-quality product can even melt. Safe water temperature for cast acrylic bathtubs is up to 80°C, for sandwich structures – from 50 to 70°C (depending on the thickness of the acrylic layer).
• To restore the antibacterial properties of the acrylic coating, periodically disinfect the bathtub with special solutions.

Ideally, it is recommended to wash your acrylic bathtub daily with liquid soap and be sure to wipe the surface dry after each use. But with the modern rhythm of life, it is quite difficult to implement this in practice. Therefore, it is advisable to wipe the bathtub at least once at night and clean it with a suitable product once or twice a week. Additional use of polishes will reduce the frequency of washing the acrylic bath and prolong the effect of the shiny surface.

Advice! If you need bathroom renovation specialists, there is a very convenient service for selecting specialists from. Just fill out the order details, the experts will respond and you can choose who to collaborate with. Each specialist in the system has a rating, reviews and examples of work, which will help with the choice. Looks like a mini tender. Placing an application is FREE and does not oblige you to anything. Works in almost all cities of Russia.

If you are a master, then go to, register in the system and you will be able to accept orders.

The new acrylic bathtub looks perfect. Unusual design, glossy surface and perfect smoothness of the coating. In order for the bowl to retain its luster for as long as possible, you should adhere to basic operating standards and follow the care recommendations.

The primary task is the competent choice of means for cleaning acrylic bathtubs, taking into account the technical and design features of polymer plumbing. We will tell you how to choose the composition. We’ll tell you in what cases to use it and how to care for those “sensitive” to mechanical and chemical exposure bowl.

At regular use hydromassage options, the nozzles do not have time to dry out - constant humidity provokes the proliferation of microorganisms, mold growth and the accumulation of lime deposits.

The procedure for carrying out the disinfection procedure:

1. Fill the tank with water so that the nozzles “go” 5-7 cm under water.
2. Pour the cleaning concentrate into the bath and turn on the hydromassage for 20 minutes - the liquid should make several circular cycles through the system.
3. Drain the water and refill the bowl.
4. Turn on the sprayers for 5 minutes and empty the bath.

Upon completion of the procedure, it is necessary to perform standard cleaning of the walls and bottom of the “font”.

Preventing contamination

Following the basic rules for using an acrylic bathtub will eliminate extra costs, will make it easier to care for your plumbing, prolonging its service life.

№1. Do not soak laundry. The components of washing powders are not always comparable to the polymer coating. In addition, if bright clothes fade, then the bathtub has every chance of “absorbing” the paint. This property of acrylic must be taken into account when washing your hair after “fresh” painting.

№2. Taboo on bathing animals.

Pets will cause damage with their claws polymer coating. As an option, you can put “anti-scratch guards” on the paws and place the animal on a bedding

№3. Caring attitude. Do not place heavy objects, metal basins, etc. in a plastic tank. They can deform acrylic and leave dents and scratches.

№4. Regular care. The best prevention formation of tubular stains - cleaning the bath after each bath. Simply rinse the bowl with warm water and remove any drops with a cloth.

If it is no longer possible to tidy up the surface of polymer plumbing fixtures, it is better to buy and or carry out renovation work by using . We advise you to read our recommended articles.

Conclusions and useful video on the topic

The video compares the effectiveness of traditional cleaning methods ( toothpaste and soda-soap solution) with household chemicals:

To maintain the impeccable cleanliness and whiteness of acrylic plumbing, there are many effective means. Available preparations do not always cope with the task, so it is better to use specialized household chemicals created taking into account the characteristics of acrylic plumbing.

Tell us what products and methods you use to care for acrylic plumbing fixtures. Share information on this issue that will be useful to site visitors. Please write comments in the block below, post photos, and ask questions.

The new acrylic bathtub looks impeccable, shines white and clean. It's nice to be in it water treatments. To she retained its shine longer, it is necessary carefully use it and follow it rules of care behind an acrylic bathtub at home.

The primary task is the competent selection of cleaning composition, taking into account the type of contamination. There are many detergents that can be used to wash an acrylic bowl at home to obtain a shiny surface.

Anti-corrosion

Rust that appears should be dealt with immediately when it is detected. It penetrates into the acrylic structure and is difficult to remove with household chemicals. Don't delay cleansing.

How to wash an acrylic bathtub from rust:

1. San Klin is a harmless and non-toxic drug. Removes rust and limescale without harming the material. Apply the cleaning solution to dirty areas with a sponge, leave for 15 minutes, and rinse with water.
2. Triton can remove rust for 10 minutes. Spray the product, distribute the foam over the entire surface. After 10 minutes, rinse with water. Triton gently and effectively cleans material.
3. Lemon juice and vinegar are excellent cleaners for acrylic bathtubs. Their use will get rid of yellowish spots. How to clean an acrylic bathtub:get warm waterto the brim, squeeze out the juice of 1 citrus, add 50 ml of table vinegar. Leave the product to act for 12 hours. Add water to keep it warm. Drain the used liquid and wash the bowl with cold liquid.

It is not enough to remove red spots. Get rid of the reason for their formation. Most often these are old taps and mesh at the bottom of the bathtub. If they are not replaced, rust will appear again and again.

Fighting mineral deposits

In the fight against limescale, the most important thing is to choose the right tactics. Otherwise, you’ll say goodbye not only to mineral deposits, but also to your plumbing.

How to clean a bathtub from limescale? For these purposes, they buy professional preparations Sanfor, Gel WC 5+, RAVAK Turbocleaner.

How to clean a bathroom:

1. Wash first with plain water. This will get rid of dust and dirt particles that could scratch the bowl in the process.
2. Apply the spray to the surface and leave for a certain time. Sanfor is kept for 5 minutes. The WC 5+ gel is left to act for 2 minutes. RAVAK Turbocleaner is diluted with water in a ratio of 1:10, to remove limescale, leave for 30 minutes.
3. Rinse off the detergent with a stream of warm water.
4. Wipe the bowl dry.

Sanfor, Gel WC 5+ and RAVAK Turbocleaner cannot be used for cleaning metal parts. Work with compounds wearing protective gloves.

Cleaning productslime with acrylic won't hurt surface. Their effect on acrylic is regularly tested.

Eliminating yellow stains

Acrylic turns yellow because of bad water, sudden temperature changes. The material loses its whiteness, if the owners dry the bathtub after reception water procedures.

And save the bowl from yellow stains? Hydrogen peroxide, laundry bleach and apple cider vinegar will help remove stains.

How to clean an acrylic bathtub:

1. Rub the yellowed area with fine-grained sandpaper or felt.
2. Make a solution of washing powder and wash the entire bowl.
3. Prepare a solution of hydrogen peroxide or apple cider vinegar(mix 1 part acrylic bathtub cleaner with 2 parts water), add a little liquid to the bleach to make a paste.
4. Apply one of the compounds to the yellowed areas and leave for 5–10 minutes. If you use gruel, wait until it dries.
5. Rinse off with warm water.

There are still many folk remedies, how to remove yellowness from an acrylic bathtub. But this is not enough. It is necessary to install a heating radiator in the room in winter before drawing water. Wipe it well surface must be perfectly dry.

Other chemicals for removing contaminants

Many professional compositions have been developed to care for acrylic bathtubs. They are used according to the manufacturer's instructions for dosage and cleaning methods.

What is the best way to clean a bathtub? acrylic coating Anyone who has decided to purchase plumbing fixtures made from this material must know.Buy special cleaning products from trusted manufacturers.

How to clean an acrylic bathtub:

1. Bass is a professional composition designed for. After using it on acrylics wow the surface, nozzles and other elements are cleaned of bacteria, fungi and viruses. Bass removes organic contaminants and food residues, it is able to thoroughly clean the entire system. This the best remedy for hydromassage baths.
2. Sif is a cleaning cream without abrasive particles. Gently cleans the bowl and leaves no streaks. Sif is universal. The cream is used to clean faucets and tiles. Sif is easy to apply, copes with any dirt and smells pleasantly of lemon.
3. Acrilan acts quickly. Allows you to clean the acrylic bathtub from lime, rust, and detergent residues. Acrylan creates a protective film.
4. Acrylic Polish is used for restoration and repair work,suitable for cleaning.
5. Mr. Chister removes dirt, soap scum, lime deposits and yellowing. This is a copolymer that protects the surface from re-contamination and facilitates maintenance.
6. Cinderella consists of organic acids, silicone oil and stabilizer. The emulsion product gently cares for the surface and removes detergent residues. Cinderella won't delete yellow spot, rust or plaque. The drug is used for daily care.
7. Tim-Profi is an environmentally friendly product. Safe a product for people with allergies to household chemicals. It doesn't just remove soap and greasy marks s and salt deposits from the acrylic surface, at the same time disinfects.
8. Bon Professional easily removes dust, adds shine and has antistatic effect. The drug is non-toxic. Bon Professional is designed to remove heavy contaminants, including rust.

All liquids are applied with a sponge and left for some time (usually 5–20 minutes, detailed instructions see label). After using professional chemicals, rinse thoroughly bath

How to restore the whiteness of a surface using home methods?

Over time the bath becomes dull. She becomes not as radiant as before. There are good home remedies to help restore whiteness.

How to clean an acrylic bathtub at home? You can whiten the surface with citric acid, baby soap or toothpaste.

How to whiten an acrylic bathtub at home:

1. Wash her high water pressure.Small dust particles will be removed.
2. Treat the surface of the plumbing with a solution of citric acid (1 tablespoon per 1 liter of water, applied from a spray bottle), baby soap (crushed, dissolved in water, whipped into foam and processed), white toothpaste (applied with the soft side of a kitchen sponge).
3. Leave them for 30–60 minutes. During this time, deeply ingrained dirt will disappear and the surface will become whiter.
4. Remove any remaining product with a cloth and warm water.

Home methods are not as effective as professional formulations. Several applications are needed to achieve the desired result.

Getting rid of scratches

Sometimes diligent cleaning ends in trouble. On a surface baths scratches appear. This occurs due to the use of abrasive substances to cleanse contaminants.

What product is used to remove abrasions, scratches and chips?

1. Polish with felt or fine sanding paper. Treat the surface carefully so as not to create more more problems. Then cover the sanded area with a special polish.
2. If you notice matte areas, simply use polish.
3. Deep scratches can be removed with liquid acrylic.Available in paste form. Apply Following the instructions, leave to dry. Rub felt surface. All care products for acrylic bathtubs are sold at a hardware store.

If you find damage, repair it immediately. Dirt quickly penetrates into scratches. It's hardly pleasant to swim in such a bath.

What should you not use when cleaning?

Don't ignore these rules. This will help save your plumbing from damage.

How to wash an acrylic bathtub at home and some useful tips:

1. Acetone will corrode acrylic. It cannot be used. Before purchasing professional chemicals, check that they are not in the composition.
2. Abrasives such as wire brushes, hard sponges and sharp objects should not be used to remove dirt.
3. Farmaldehydes – strong allergens, corrode acrylic surface .
4. Chlorine-containing products cause tarnishing acrylic , they subsequently corrode the polymer. The surface becomes cloudy, porous and rough.
5. Ammonia can be used if you cannot do without it. in other cases, refuse to use it. Destroys acrylic structure.
6. Washing powder and other similar compositions cannot be used without first dissolving.
7. Do not soak heavily soiled items in acrylic sanitary ware. Use separate containers for this.
8. Avoid washing your shoes in it. Dirt is an abrasive. Under the pressure of water it will leave scratches.
9. Paint brushes and others painting tools clean in a sink or separate bowl.

Acrylic bathtubs differ from other sanitary ware in their dirt-repellent effect. But If not properly cared for, the surface loses its “sales appearance”.

Cleaning compositions should be selected depending on the frequency of use, type of contamination, and water characteristics.

The acrylic surface needs to be kept clean regularly. Follow cleaning instructions, tips and care recommendations. This will preserve the beauty of the bowl and its shine for many years.