Ways to paint walls: brush, roller, sponge. Decorative painting of walls with your own hands: unusual methods of applying Wall decor with a sponge

Tired of monotony in the interior? Would you like something like that? It's time to think about decorative painting of walls, allowing you to achieve original and unusual effects.

Tools used for decorative

Experts say that thanks to a special set of tools it is possible to achieve decorative effect even using regular paint. These are rollers (regular foam, fur, rubber or textured), brushes, brushes, scrapers, spatulas (plastic, metal, rubber, serrated), Venetian trowel, sponges (foam and natural, sea), pieces of crumpled paper and fabric, bars for sanding, sandpaper and stencils.

You don’t have to spend money on purchasing this entire arsenal: what exactly you need from the list will depend on what effect you want to get on the walls. The cost of all these tools is not so high, and they will last for a sufficient time - if you handle them carefully and wash them immediately after painting.

Craftsmen have figured out how to use even more accessible analogues instead of some tools. For example, a texture roller can be made from a regular one using a piece of fabric or plastic bag and ropes. The paint application pattern will turn out to be unpredictable and interesting, and no one else will have something like this.

Professionals consider decorative painting of walls one of the most economical ways transformation of premises. Paints are applied in 1-2 layers (the 2nd layer of paint usually takes 20% less). So 1 can of 2.5 liters may be quite enough to cover 40 m2. The exact material consumption will depend on what effect and tool is used.

Specialist services decorative painting walls are not cheap. And this is the case when you can save a lot by decoratively painting the walls yourself. The main thing is to carefully study the application instructions and various options obtaining decorative effects.

Read also: Installation of a balcony block: instructions

Interesting effects using a textured roller

In order to create a glaze effect, either, speaking in simple language, spectacular blurry spots, deep colors of varying saturation, the wall must first be painted in a base shade. After that, a crumpled dry (or wet - to obtain a softer pattern) piece of fabric (or a cellophane bag) is randomly filled with a pattern with paint of a different shade from the base color. Other things that can create texture are quite suitable for a similar purpose: sponges (they give a soft spotted pattern), a brush (spray method), and also your own palms.

A wallpaper-like pattern is created on painted walls using 3D rollers with patterns (they are also called stencil rollers). Rubber or silicone models are used, but lint rollers can also be used; they also create an interesting pattern. For getting good result of the work being carried out, before applying the drawing, it is worth carrying out a test paint (on a sheet or somewhere at the bottom of the wall), and during the work process, regularly remove excess paint from the roller so that unsightly streaks do not appear.

As noted above, you can create an interesting textured roller with your own hands. To do this, an ordinary roller is covered with a “coat” of sponge, rag, suede, paper or film (all this is fixed on the surface with threads). With the help of such an unusual tool, a chaotic spotted pattern is imprinted on the walls.

To create a marble ornament, two colors of the main shade are taken. First of all, the walls are painted in the main background shade. Then, using a wide brush, uneven stripes are applied to the wall, running parallel and not covering the entire surface of the wall. As a result, we achieve original and beautiful ornament. In those places where the two main shades mix, a third color appears. After this, a pattern imitating veins is applied with a thin brush. natural stone. Then, after the layer has dried, the final finishing is performed. For this purpose, you need to take a small sponge and moisten it in paint, previously diluted with water. Then you need to blot the entire surface of the wall with a sponge - the result is a beautiful smoky effect. If you apply paint of various colors to the wall in 2-4 layers, and then brush it over the wall with a stiff brush and cover the wall with wax, you can also get a “marble effect.” If you walk over a layer of paint with a cloth (this method is called “rolling the cloth”), you get the illusion of falling folds. We “comb” the not-dry layer of paint with a brush with stiff bristles, holding it parallel to the wall, and we get an imitation of coarse natural fabric (the “linen” technique).

Read also: Methods for laying ceramic tiles. Installation stages

A water emulsion will help you get the illusion of crumpled paper. For this purpose, another layer of paint of a different color is applied to the dried 1st layer using a crumpled plastic bag. You can replace the crumpled bag with a sponge, which also helps create the illusion of a grainy and textured wall.

How to apply decorative paints

Various types decorative paints for walls, presented on the modern market, provide enormous freedom for the realization of creative thoughts. The advantage of these unique ready-made compositions The fact is that their application does not require special skills or the use of special tools.

Compositions with a mother-of-pearl effect (“chameleon paints”) change color when different angles lighting, which creates the impression of walls covered with silk fabric.

Coloring compositions with a velor or velvet effect contain solid multi-colored particles. After applying this paint, the surface of the wall becomes textured, visually soft, deep - like a real velor canvas.

A special feature of granite (mosaic) paint is the multi-colored acrylic bubbles included in this mixture. When painting with a spray gun, the bubbles break against the wall, resulting in the perfect illusion of a granite texture.

(It's time for real creativity)

Creating color effects is truly a creative activity. You can choose any of them - subtle or bold, calm or flashy - to your liking. And you don't need to create them special devices, and any of them are not difficult to master. I recommend trying it somewhere inconspicuous (behind a door, for example) to decide if it's worth applying throughout the room. All these effects are based on the same principle: first apply the base coat a certain color, and a colorful effect is created on top of it.

Blurred color

A darker-colored paint of the same color, diluted in water, is applied over the base coating. The result is a beautiful spotted surface. To add depth, use two or three tones of the same color.

You will need:

  • Water-based paint of two tones of the same color - fawn and darker
  • Dishcloth (or sponge or large brush)
  • Paint bucket

1. Apply a fawn coat and let dry. Dilute the lightest wash tone. Dip a kitchen rag into it and apply the paint using loose, circular motions. If the stains look too light, add paint to the solution, but you cannot lighten stains that have already been applied.

2. When the first layer has dried, repeat the same with a solution that is more intense in tone. You can also apply the paint with a sponge or a large wide brush.

3. As a result, you will get a beautiful, smoky surface. Not only delicate fawn stains will look good on the wall, but also bolder, contrasting shades of color.

"Sponge"

Using a sponge you can create elegant color patterns. It is very important to take a natural and not a synthetic sponge, since it has asymmetrical beautiful pores. The effect can be created either by applying paint or by sponging off some of the fresh paint. Try both methods and decide which effect you like.

Removing a layer of paint


1. First, cover the wall with two layers of paint in the color of your choice - after drying the first one, of course! The paint can be applied with a brush, a paint pad or a roller, the most important thing is that it is applied to a completely dry first layer of paint, otherwise the special effect simply will not work.

2. Apply a mixture of 1 part paint and 4 parts glaze over the base coat. The glaze will keep the paint from drying too quickly, giving you time to finish the job. Blot the glaze with a sponge, exposing the layer of base coating underneath. As soon as the pores of the sponge become clogged, rinse it in water.

2nd method of effect - applying paint

3. To apply streaks, dip a sponge into the paint and remove excess with a piece of paper towel. Press it against the wall, creating beautiful splashes of color. Rotate the sponge to continually change the pattern. Rinse the sponge regularly clean water, her pores should not be clogged.

You will need:

  • Natural sponge
  • Water-based paint
  • Glaze for glaze
  • Paint brush
  • Paint bucket

"Flap" and "rag roller"

I don't like boring ones plain walls... We need to make them more fun.

A rag and a rag roller also allow you to draw “random” patterns; you need several cotton rags for this. By crumpling or rolling them with a roller, you can remove the glaze applied over the base paint, or you can add paint, creating amazing patterns.

You will need:

  • Rags from cotton fabric
  • Water-based paint
  • Glaze for glaze
  • Paint brush
  • Paint bucket

"Rozhka"

1. Coat the painted wall with a solution of 1 part paint and 4 parts glaze. Use a crumpled piece to blot the glaze as you did with a sponge (see above). Press the cloth against the glaze and quickly move it away from the wall so as not to smear the imprint left on the glaze.

2. Change the position of the rag all the time so that the pattern on the wall is more varied - otherwise the entire wall will be covered with the same spots and will look rather boring.

"Rag roller"

1. Working with a cloth roller is similar to working with a sponge. Apply a solution of 1 part paint and 4 parts glaze over the base coat. Roll up a clean rag with a roller (it should not be tight) and prepare replacement rags.

2. While the icing is still wet, roll the roller from bottom to top, from floor to ceiling. Try to roll so that a random pattern is imprinted on the wall, and not distinguishable stripes from the roller.

3. If the rag becomes clogged, rinse it and re-roll it. If you want a more subtle effect, go over the wall with a soft, dry paint brush.

"Bag"

For this special effect you need... an ordinary plastic bag from the store. Randomly crumpled, it creates a sharp pattern on the wall. We can say that a plastic bag serves you twice: first you come home with it from the store, and then you use it to decorate your room. When finished, rinse it in water and take it to the waste disposal box.

1. Mix in a bucket water-based paint with glaze and apply over a layer of base paint. Wrap a rag in a plastic bag and crumple it up. The rag will give the package some volume and make its configuration more interesting. And without it, it may be too thin to leave interesting decorative marks on the paint.

To understand how to properly apply lipstick to your lips, you need to determine their type, shape and choose high-quality cosmetics.

Several attempts in front of the mirror will show an unsurpassed result.

Which lipstick color to choose

Observe correct technique applying lipstick is only part of the success. After all, if the color is chosen incorrectly, the face can visually age. Insufficient whiteness of teeth can also occur due to lipstick that is not suitable for the girl.

A variety of shades allows you to experiment and add solemnity to your image even after a working day. The main thing is that the lipstick tone goes well with your skin color. For example, fair-skinned girls are advised to choose cool tones. The range from light pink to plum is perfect.

Dark-skinned young ladies better pay attention to bright specimens. Shades of peach and brown are suitable. Girls of average type will look good with red and golden tones lipstick.

The following lipsticks are suitable for girls depending on their hair color:

  • coral, berry, soft peach and mauve are intended for fair-haired girls;
  • Makeup artists recommend brown and terracotta shades for red-haired beasts;
  • bright shades are amazing for girls with dark hair.

You can also choose lipstick based on your eye color. For example, brown and scarlet shades are suitable for brown-eyed beauties. Cherry and beige colors harmonize perfectly with the pupils blue color. Terracotta and orange lipstick are recommended for green-eyed representatives of the fair sex. Light beige and cherry shades highlight the depth of gray eyes.

Makeup artists recommend taking age into account when choosing lipstick. It is best to give to young girls preference for light pearlescent glitter. Thick and matte ones add solidity to the image, which looks out of place in this case.


For women who are about thirty years old, it is appropriate to wear bright makeup. Satin and satin texture will emphasize youth and freshness of the skin. Women over forty do not need to choose pearlescent glosses. Bright shades also inappropriate because they highlight wrinkles around the mouth. Perfect fit mature women cherry and plum shades.

Advice! If you choose the wrong shade of lipstick, do not rush to throw it away. Perhaps if you mix it with another shade, you can get the perfect tone for you.

How to apply lip pencil correctly

Lipstick adds shine and beauty to makeup, but from a functional point of view, you can’t do without a pencil. It can be found in any cosmetics store. When choosing, you need to pay attention to the fact that the pencil is waterproof.


Lip liner is also used as a base for lipstick to make it last longer. In this case, you need to mark the outline and shade the line inward, gradually shading the surface. Do not apply the pencil under the glitter, because there is a risk of the color pigment peeling off, which collects in the folds and looks ridiculous.

You can use a pencil instead of lipstick to get a matte effect. The main thing is to apply cosmetics in a thin layer. The shade doesn't matter.

Most often, the pencil is used to enlarge and reduce lips. It is especially appropriate to use it if the surface is flat.



Advice! Lip pencil can be used as a base for eye shadow and as blush. The basic rule is to choose quality product. The color is selected individually in accordance with the application area and color type.

Technique for shaping lips without pencil

You can diversify your usual makeup using different techniques applying lipstick:

  • Ombre involves treating the visible part of the mucous membrane with matte, preferably red lipstick. The color is applied with strokes to the center of the lips. The torn border looks harmonious. You can experiment and apply a gradient not only from the corners to the middle, but also from the upper lip to the lower.
  • In 2017, piercing is again fashionable, the imitation of which on the lips can be done with gold lipstick. To do this, you need to apply a vertical golden or metallic stripe in the center of your previously painted lips.

  • Matte lipstick does not always give the desired effect, so to create texture, it is better to choose a glossy one, which is nailed on top with crumbly shadows matched to the tone. To avoid monotony, you can experiment with different shades of decorative cosmetics. When doing this type of makeup, choose a flat brush made of natural bristles. Before applying eyeshadow, shake lightly.
  • Colored shadows stick worse to lipstick than fine glitter. If the entire surface is covered in glitter, watch the container you drink from. There is a risk of getting it dirty. This option is possible, but it is more appropriate when used in combination with gloss rather than lipstick.

  • It is important to apply the effect of chapped lips. To create it, you need to apply lipstick with patting movements, without highlighting the contour. Carelessness is back in fashion.

Advice! Don't be afraid to accept bold decisions and use original lipstick application techniques. The effect on your lips will look different than in the photo on the Internet. You just have to try to find the perfect look for yourself.

Red lipstick suits everyone, the main thing is to know how to apply it

Red lipstick is considered universal, although because of its brightness, not every girl will risk purchasing it. It is suitable for any color type, the main thing is to choose the right shade.

Scarlet lipstick ideally hides small cracks, wounds and even colds on the lips. Also used to change the contour.

If a girl doesn't risk using red lipstick, she simply doesn't know how to use it. It is believed that bright makeup indicates the vulgarity of the owner. But actually new image will relieve indecision, give confidence and sexuality.



How to properly apply red lipstick? Makeup artists distinguish three main methods:

  • When applying makeup to your face, you need to lightly powder your lips. Then, from the stick with a thin pointed brush, draw a large number of lipstick. With bold movements, the contour is drawn starting from the upper lip. Then applied again thin layer powder and a contour is drawn. After this stage, the inside of the lips is painted over. It is recommended to use a brush to apply the color perfectly. Once your lips are complete, apply powder around the area to highlight the edges of the color.
  • After completing the basic makeup, apply a thick layer of base to the lips. It is advisable that it contains cosmetic silicone to smooth the surface. In addition to smoothness, the base increases the durability of the lipstick. The outline is drawn with a pencil, and the entire surface is filled with a brush and lipstick. The lipstick should be layered using tapping movements until the desired shade is achieved.
  • You can do without a contour pencil if, before applying lipstick, you treat the edges with a colorless wax pencil. The color is then applied to the entire surface. Use a paper towel to dry your lips to prolong the color's longevity. After which cosmetics are applied again in a thick layer.
    Don't be afraid to wear red lipstick. It reveals femininity, sexuality and speaks of the courage of the individual.

Advice! When choosing scarlet lipstick with a bluish tint, be careful, as the lamps in the store emit cold light and makeup looks paler than it really is.

Features of applying dark lipstick

Dark lipstick becomes bright accent in makeup. When choosing a shade, you need to consider your skin color. Fair-faced blondes are recommended to choose purple tones, and for dark brown-haired women - plum.

Before treating your lips, you need to perfectly even out your complexion tone. To accentuate the lower part, use the sculpting method. That is, correction powder is applied to the cheekbones and side areas of the forehead. The center of the face is highlighted in a light tone.


Basic requirements and approaches to makeup under dark lipstick:

  • one color scheme for eyes and lips;
  • eyeliner for brown-haired women should be black, for blondes – brown;
    you need to exclude blue eyeliner, since in combination with rich
  • a shade of lipstick, naturalness disappears;
  • “Smoky eye” is combined with dark lipstick if the shadows are not too bright (brown-haired women can use the classic technique with jet-black makeup, and brown colors suit blondes).
  • Also hides all lip imperfections, including dry crust.

Advice! Remember that brightly painted lips are in harmony only with discreet eye makeup.

How to add matteness to your lips with lipstick?

IN Lately matte lips are a real trend of the season. However, choosing a lipstick with the right texture is not so easy. That's why makeup artists offer original ways creating perfect lip makeup.

The main advice is to combine matte with rich dark shades. Pale color schemes are lost and do not look seductive.

To pre-treat your lips, you can use a scrub that removes dead skin particles. It contains a mixture of honey, granulated sugar and olive oil.


To ensure that matte lipstick stays on your lips for a long time, you should moisturize your lips with any vegetable oil before applying it.

Unlike glossy lipstick, matte lipstick does not need to be rubbed with your lips. Use a special synthetic brush to paint the corners.

At home, you can do without special matte lipstick. Makeup artists recommend using a regular lipstick without glitter to apply lipstick. Then a regular dry napkin is applied on top and sprinkled with powder or blush. The napkin removes shine, but maintains color saturation.

Advice! To deepen the color of matte lipstick, you need to apply a concealer to your lips as a base.

Change the shape of your lips with lipstick? Just!

You can change the shape of your lips yourself using cosmetics if you know the secrets of applying makeup.

  • You can increase the volume using a pencil. The corners are carefully painted, and coral or pink lipstick is applied on top. The lips are made plump by a shimmering gloss that is applied to the already painted surface.
  • Foundation will help reduce volume. With its help, they hide their own lip contour, and draw a new border below with a pencil.
  • Perfect bright lips - step by step

    The main thing is not to forget that even thin lips look seductive if you do the right makeup. Therefore, do not try to increase the volume so as not to look funny.

Plain smooth surfaces can easily be given a wonderful shimmering effect by treating them with a sponge. This technique is very simple to perform and ideal for finishing large surfaces. However, it can also be used to decorate individual pieces of furniture or other items. So, let's begin to master the technique of applying paint using a sponge.

Materials and tools:

  • water-dispersion paint (preferably latex, so that the surface can be washed later)
  • roller
  • paint tray
  • sponge
  • paper
  • gloves

Why did we choose emulsion latex paint? It is easy to use, does not smell and is not too expensive. Please note that the result finishing works The choice of sponge also influences; it is best to do the work with a natural sea sponge.

Preparation:

Before you start painting, it's best to check if the colors you choose go well together. To do this, apply paint to a sheet of paper or a piece of wallpaper and apply samples to the wall.

The walls to be painted must be smooth, free from dirt and dust. Be sure to thoroughly prepare surfaces for painting.

Process

  1. Pour some paint into the tray.
  2. Blot the roller in the paint and squeeze it well so that it does not drip or flow.
  3. Apply a base coat of paint to the wall.
  4. Let the surfaces dry for a couple of hours.
  5. Prepare the sponge for work by soaking it in water and squeezing it out.
  6. Pour paint into a clean tray for the second coat.
  7. Lightly dab the sponge into the paint. To ensure that the paint does not drip and uniform prints are obtained, the sponge should be almost dry.
  8. Press the sponge against the edge of the tray or blot with paper to remove excess paint.
  9. Start finishing from the top of the wall, lightly pressing the sponge onto the surface.
  10. Let the second layer dry.
  11. Rinse the sponge well and prepare the paint for the third coat.
  12. After this, we apply a third layer of paint with a sponge, and try to fill the gaps between the prints of the first layer. The base layer should also show through a little.
  13. If you are using one color, it is better to place the prints closer together so that the layer is even. If there are several colors, then, on the contrary, slightly shift the prints in relation to each other. Avoid overlapping prints, especially in corners and near doors. Rotate the sponge periodically to change the pattern.

Important! To prevent adjacent areas from getting dirty, the sponge can only be used at the third stage of work. At the second stage, apply paint on top of the base layer with a brush. Then remove excess fresh paint: simply blot it with a clean sponge.

Popular questions about construction

Project documentation necessary to solve the following problems:
assessing the compliance of a construction project with the requirements of technical standards and state standards. This assessment is made before the state examination of the project;
calculation required quantity construction- finishing materials, drawing up estimates and determining the budget for construction (reconstruction) of the facility;
coordination with government services and departments;
obtaining a construction permit;
development of working documentation necessary for construction and installation work.
The project will also be required when handing over the finished object to the customer to check it for compliance with the stated requirements.

To select the type and quantity of building or finishing materials, you must use project data or own calculations. In this case, it is recommended to purchase goods with a small reserve, approximately plus 10-15% of the estimated volume. When purchasing, you should pay attention to the presence of labeling, expiration date and specific qualities of the product. Important will have characteristics such as frost resistance and moisture resistance building materials, their maintainability. We should not forget about additional consumables, such as fasteners, glue, mortars and so on. You shouldn't skimp on them. After the construction or renovation project is completed necessary material, you need to ensure that you have the tools to carry out all types of planned work.

The quality of the work ahead largely depends on the choice of building materials. If financial opportunities make it best to purchase goods from well-known brands that inspire confidence in the buyer. And you need to purchase them from official dealers so as not to buy a fake. The cost of building materials in this case will be high, but the quality will also be excellent. If you have a limited budget, you can use cheaper analogues with a good price-quality ratio. You should not buy a product if its price is too low compared to a branded product. As a rule, these are low-quality and short-lived products.

Package quality building materials always contains all the information necessary for the buyer. It must have the manufacturer’s logo, a description of the purpose of the product, production and expiration dates, composition, and rules of use. Compliance of the product with the declared characteristics is confirmed by a certificate, which the seller is obliged to present to the buyer upon his request.

You can carry out various construction and finishing works on your own. But their list is limited for a number of reasons. Firstly, the use of special machines, such as a crane or excavator, requires not only the availability special equipment, but also permission to operate it. Secondly, if necessary, electrical and technical welding work, you will need to undergo fire safety training. Thirdly, not every type of work can be done alone. If you are installing rafters on the roof of a cottage or installing SIP panels, then you cannot do without assistants. Fourthly, some types of work require the use of special, expensive tools and equipment, which are not rational to buy for one-time use.

Engineering systems– these are complex objects that include power supply lines, water supply and sewerage, ventilation and air conditioning, gas supply, and heating. Their construction requires highly qualified performers, since the quality utility networks The comfort and safety of home residents or office workers depends. Therefore, the construction of such objects should be trusted exclusively to professionals.

Reviews about building materials

The professionalism of our employees allows the company to take on projects of any complexity. Work has to be carried out not only in warm rooms, but also somewhere outside the city in severe frost. The equipment must show stable operation in any weather. It is for this reason that it is important for us to use high-quality and reliable tool. In addition, it must have an autonomous power source.

Andrey Vladimirovich, construction company Novosibirsk

Yes! Finally, my wife and I managed to buy our own apartment. The layout suited me completely. But there was one problem in the bathroom. The strong humidity in this room literally ate away the surface of the walls. They suffered for a long time until I decided to cover them with moisture-resistant plasterboard (GKLV). We haven’t remembered the problem for 12 years now. Yes and appearance the room did not deteriorate.

Vyacheslav, Moscow

I spent a long time choosing what material to use to build a house on my plot in a holiday village. Many friends began to recommend pine timber. I decided to take the risk at my own risk. As it turned out, I was right at all. This durable material can withstand any weather surprises. At the same time, excellent thermal insulation pleases. A lot of time has passed, but the timber is not going to rot.

Fedor Mikhailovich, dacha village

For many years our team has been famous for its painters. A team of professionals who have always been encouraged by their superiors for Good work. But what was my disappointment when people began to openly complain about poor quality work. This was all due to poor quality materials. We switched to NC paints. Paint and varnish coatings They last a long time, the colors stay vibrant, and we no longer receive unfair complaints.