Thermally insulated pipes uponor ecoflex for external. Heating mains (heat-insulated pipelines) Uponor Ecoflex. Uponor Ecoflex Quattro Thermally Insulated Pipes

The waterproof and completely corrosion-free design makes the Uponor ECOFLEX system reliable and durable. This means that for many decades you will forget about the need for expensive work to replace and repair pipelines. Uponor ecoflex is a modern thermally insulated pipeline for supplying cold and hot water (heating and water supply), as well as coolant to a house, garage, bathhouse, etc.

In the most severe frosts, your home will always be warm and comfortable. This was taken care of by the engineers who created the non-freezing thermally insulated Ecoflex pipeline from anti-corrosion materials and completed it electric cable and high quality thermal insulation Uponor Ecoflex, thanks to which heat does not escape through the walls of the pipe into the ground, but creates comfort and coziness in your home. Onor ECOFLEX pipelines are not only modern and prestigious, but also economically effective solution m. Your tap will have clean, rust-free water without interruption. Savings when using Uponor Ecoflex thermally insulated pipes are achieved due to its quality, durability and reliability.

Products in our catalog:

More detailed information and you can get samples by calling or visiting our office!

Thermally insulated Uponor Ecoflex Aqua pipes (Ecoflex Aqua stopper - water supply)

Prev insulated pipes Uponor Ecoflex Aqua series consists of single-pipe and two-pipe system. Maximum temperature falling pipes: 95°C, operating pressure: 10 bar. The Ecoflex Aqua Uponor pipeline consists of one or two supply pipes made of cross-linked polyethylene Uponor Pex (Wirsbo), closed-cell thermal insulation made of Uponor Pex polyethylene foam (Wirsbo), and a protective corrugated polyethylene casing high density. The range of Uponor Ecoflex Aqua includes pipes and components for external hot water supply networks. The service life of Ononor Ecoflex pipes is 50 years, with continuous operation at operating temperature.

Thermally insulated Uponor Ecoflex Thermo pipe (Ecoflex thermo-heating support)

The pre-insulated pipes of the Uponor Ecoflex Thermo series consist of a one-pipe or two-pipe system. Maximum temperature of falling pipes: 95°C, operating pressure 6 bar. Uponor Ecoflex Thermo piping includes pipes and components for heating systems. Uponor Ecoflex Thermo pipelines consist of one or two pipes (T1, T2) made of cross-linked polyethylene Uponor Uponor (Wirsbo) with an oxygen barrier layer eval, thermal insulation with closed cells made of Ononor Pex polyethylene foam, and a protective corrugated casing made of high-density polyethylene (heating). The service life of Ononor Ecoflex pipes is 50 years, with continuous operation at operating temperature.

Uponor Ecoflex Quattro pre-insulated pipes (Ecoflex Quattro support)

Thermally insulated pipes of the Uponor Ecoflex Quattro series consist of four pipes made of cross-linked polyethylene Uponor Pex (Wirsbo), two of them are intended for heating - with an oxygen barrier layer eval, thermal insulation with closed cells made of Uponor Pex polyethylene foam (Wirsbo), and a protective corrugated casing from high density polyethylene. Pmax.slave 10 bar. Maximum operating parameters for heating pipes: Tmax.work +95°C, Pmax.work 6 bar; for DHW pipes: Tmax.work +95°C. The Uponor Ecoflex Quattro pipelines combine heating (T1, T2) and hot water supply (T3, T4) pipes.

Thermally insulated pipes Uponor Ecoflex Supra Plus (uponor ecoflex supraplus)

The Ecoflex Supra Plus range includes pipes and components for cold water supply systems. The Ecoflex Supra Plus Ononor pipeline consists of Uponor Pex (Wirsbo) and Uponor Pex pipes (for diameters 75.90 and 110 mm), a heating self-regulating cable, and a Ononor polyethylene guide tube Pex (Wirsbo), adjacent to the supply pipe and designed to accommodate temperature sensor, thermal insulation with closed cells made of Ononor Pex (Wirsbo) polyethylene foam (thermal insulated pipes), and a protective corrugated casing made of high-density polyethylene. Operating parameters: Trab. +20°С, Ru 10 bar. The maximum specific power of the heating cable is 10 W/m.

Thermally insulated pipe Uponor Supra Ecoflex Standard

The range of Uponor Ecoflex Supra Standard includes pipes and components for cold water supply systems. The Uponor Ecoflex Supra Standard pipeline consists of Ononor REM and Ononor REN pipes (for diameters 75, 90 and 110 mm), a heating cable, control equipment, a temperature sensor, closed-cell thermal insulation made of Ononor Pex (Wirsbo) polyethylene foam, and a protective corrugated casing made of high-quality polyethylene density. Operating parameters: Trab. +20°С, Ru 10 bar. The maximum specific power of the heating cable is 25 W/m.

Types by purpose:

  • installation of heating mains - for main heating supply;
  • Uponor pipe for water supply;
  • sewer - for pressure sewerage.

The Ecoflex polyethylene line is represented by the following variations:

  1. Quattro – for connecting heat supply communications in separate buildings. Used to circulate hot water, supply water flow for economic needs. Convenient for connecting communications in pairs to single-family houses, local boiler houses, terraced houses, and multi-apartment buildings.
  2. Thermo - presented in two subtypes - Single, Twin. The first is characterized by one heat-insulating pipe, the second by two (supply and return with a diameter of up to 63 mm). Provides reduction in energy costs, operation, and reduction of heat losses. Responsible for water distribution in the local heating network. Involves connecting private residential buildings, construction complexes. In winter it is responsible for heat supply, in summer it is responsible for cooling the premises.
  3. Supra - used in cold water supply, cooling ( industrial production, swimming pools, hotels). To ensure frost resistance when transporting water, it is equipped with an additional thermal electric cable. The manufacturer has focused on reducing financial installation costs by connecting the working PE pipe using electrically resistant compression fittings.
  4. Supra plus – The best decision for frost-resistant provision cold water thanks to heating of the pipe in places of possible freezing. The possibility of laying directly on the snow cover has been implemented. PE80 supply pipes are connected using threaded, electrically resistant fittings, provided they are compatible with PE 80, PE100 pipes.
  5. Aqua - available in 2 variations - Twin, Single. Twin is distinguished by the presence of a second circulation pipe. If necessary, the system is additionally equipped with a thermal electric cable. Simplicity of installation is ensured by installation in a trench up to 40 cm deep - the method is not inferior in durability to deep installation.

Description of Uponor Ecoflex thermally insulated pipes

Uponor thermally insulated pipes are flexible, pre-insulated pipes that have proven themselves as pipelines for heating and water supply, in the design and installation of all types of industrial and residential buildings. on the Russian and world markets.

Application of Uponor Ecoflex thermally insulated pipes

Uponor thermally insulated pipes are used for external local heating networks (hot water supply, heating networks and technological processes), which in turn transport hot water with temperatures up to 95°C and pressure up to 1.0 MPa, as well as in external cold supply networks, cold water supply and wastewater disposal. Uponor thermally insulated pipes have fairly high application rates, which are due to special chemical properties materials from which Uponor thermally insulated pipes are made such as: – Thermo, Aqua, Quattro and Supra:

Uponor Thermo pipes are designed to maintain the temperature of the transporting water into the heating system. It is manufactured in single and double Thermo Twin versions which have 2 pipes, supply and return. Uponor Thermo thermally insulated pipe is manufactured in a single protective casing.

Uponor Aqua pipes are designed to maintain the temperature of the water transporting to the hot water supply system. Uponor Aqua thermally insulated pipes are manufactured in single and double Aqua Twin versions which have a specially built-in circulation pipe.

Uponor Quattro pipes are technical solution"four in one". Thermally insulated Uponor Quattro pipes are designed to transport water entering heating and hot water supply systems. Uponor Quattro pipes are the ideal and most efficient solution for connecting all types of free-standing buildings.

Uponor Supra pipes are manufactured to solve cold transport problems. drinking water, cooling water or Wastewater. Uponor Supra thermally insulated pipes have a built-in heating cable to protect water from freezing.

Designheat-insulating pipesUponor Ecoflex

1. Special HDPE protective shell: impact resistant, durable and flexible, achieved through the use of corrugated geometry with stiffeners.

2. The insulation is made of closed-cell PE-X foam, which fully guarantees the ideal insulating properties of Uponor thermal insulation pipes, excellent aging resistance, moisture-proof, high flexibility and lightness of the pipeline.

3. Using the “Dog Bone” method (red-blue core), which effectively prevents any errors in determining the transported medium between the return and supply pipes.

4. Uponor thermal insulation pipes for transporting media are made of “PE-Xa” material, which has a number of advantages: resistance to elevated temperature, the formation of all kinds of deposits and various cracks under the influence of pressure of the transporting fluid.

Advantages for installation and pipe connectionsUponor Ecoflex

  • Installation of Uponor thermal insulation pipes in corners and in the presence of various obstacles.
  • Installation of Uponor thermal insulation pipes in coils up to 200 m long without any additional connections or connections.
  • The use of Uponor's self-compensating thermal insulation pipe design makes it possible to completely eliminate the need for L-shaped and U-shaped expansion joints.
  • Minimal time spent on installation of Uponor heat-insulating pipes on site (low financial installation costs).
  • Reliable and safe method Uponor insulated pipe connections, which includes subsequent insulation of pipe connections and connectors.
Production of thermally insulated pipes uponor

Modern solutions for local heat distribution

To pump hot water in heating networks, uponor thermally insulated pipes are used, made of cross-linked polyethylene PE-Xa and covered with a heat-insulating layer of polyethylene foam. Since in Lately The issues of saving thermal energy are very acute, and it is the heat-insulated Ononor pipes that allow maximum efficiency solve the problem of economical local heat distribution. The use of such heat-insulated pipes makes it possible to carry out very long routes with virtually no losses, since the pipes are produced in great lengths, up to 200 meters, and the laying of the main line can be done without joints.

Installing such pipes can be convenient and simple, since you do not need to use any construction equipment for this. Plastic pipelines, unlike metal ones, are not afraid of corrosion, and, therefore, can last much longer.

One heat-insulating casing can contain not only one pipe for pumping liquid, but also two and even four - it all depends on specific tasks heating mains.

There are also designs that have a heating cable inside, allowing for water supply in winter time without fear of defrosting.

Uponor offers Uponor Ecoflex thermally insulated pipes, which precisely meet all modern requirements for reliability, efficiency, durability and safety of pipelines. These pipes can be used not only for heating networks, but also for cooling networks. The purposes of their use are very wide. These may be leading routes to residential buildings, systems central heating and central cooling, industrial enterprises producing biogas and other bioenergy facilities. Any network is installed quickly and efficiently, even if the working conditions are highly complex.

Installation of Uponor thermally insulated pipes

Uponor Ecoflex pipes are widely known for their reliability innovative systems, characterized by flexibility and high profitability. With their help, transportation of various liquids is organized within buildings and outside. The system includes a full set of devices to ensure water supply for domestic and drinking purposes. The material of the pipes guarantees a long service life, and thanks to their low weight and high flexibility, the pipes are easy to install, even around obstacles and rounding corners if necessary.

Advantages of Uponor insulated pipes:

  • there is no need for welding, an expensive and fire-hazardous procedure;
  • during installation of this type no pipes required additional expenses;
  • Due to the light weight of the pipes, transportation and installation are not required. special equipment;
  • increased pipe flexibility simplifies and speeds up installation work;
  • no need for power tools simplifies installation;
  • During the entire service life, thermal insulation absorbs little water (less than 1%).
Uponor Ecoflex heating pipe

Uponor thermally insulated pipes are flexible, pre-insulated pipes that have proven themselves as pipelines for heating and water supply, in the design and installation of all types of industrial and residential buildings. on the Russian and world markets.

Application of Uponor Ecoflex thermally insulated pipes

Uponor thermally insulated pipes are used for external local heating networks (hot water supply, heating networks and technological process networks), which in turn transport hot water with temperatures up to 95°C and pressure up to 1.0 MPa, as well as in external cooling networks, cold water supply and sanitation. Uponor thermally insulated pipes have fairly high application rates, which are due to the special chemical properties of the materials from which Uponor thermally insulated pipes are made, such as: – Thermo, Aqua, Quattro and Supra:

Uponor Ecoflex Thermo insulated pipes

Uponor Thermo pipes are designed to maintain the temperature of the transporting water into the heating system. It is manufactured in single and double Thermo Twin versions which have 2 pipes, supply and return. Uponor Thermo thermally insulated pipe is manufactured in a single protective casing.

Uponor Ecoflex Aqua Thermally Insulated Pipes

Uponor Aqua pipes are designed to maintain the temperature of the water transporting to the hot water supply system. Uponor Aqua thermally insulated pipes are manufactured in single and double Aqua Twin versions which have a specially built-in circulation pipe.

Uponor Ecoflex Quattro Thermally Insulated Pipes

Uponor Quattro pipes are a four-in-one solution. Thermally insulated Uponor Quattro pipes are designed to transport water entering heating and hot water supply systems. Uponor Quattro pipes are the ideal and most efficient solution for connecting all types of free-standing buildings.

Uponor Supra Thermally Insulated Pipes

Uponor Supra pipes are manufactured to solve the problems of transporting cold drinking water, cooling water or waste water. Uponor Supra thermally insulated pipes have a built-in heating cable to protect water from freezing.

Designheat-insulating pipes

1. Special HDPE protective shell: impact resistant, durable and flexible, achieved through the use of corrugated geometry with stiffeners.

2. The insulation is made of closed-cell PE-X foam, which fully guarantees the ideal insulating properties of Uponor thermal insulation pipes, excellent aging resistance, moisture-proof, high flexibility and lightness of the pipeline.

3. Using the “Dog Bone” method (red-blue core), which effectively prevents any errors in determining the transported medium between the return and supply pipes.

4. Uponor thermal insulation pipes for transporting media are made of “PE-Xa” material, which has a number of advantages: resistance to elevated temperatures, the formation of all kinds of deposits and various cracks under the influence of pressure of the transporting liquid.

Advantages for installation and pipe connections.

  • Installation of Uponor thermal insulation pipes in corners and in the presence of various obstacles.
  • Installation of Uponor thermal insulation pipes in coils up to 200 m long without any additional connections or connections.
  • The use of Uponor's self-compensating thermal insulation pipe design makes it possible to completely eliminate the need for L-shaped and U-shaped expansion joints.
  • Minimal time spent on installation of Uponor heat-insulating pipes on site (low financial installation costs).
  • A reliable and safe method for connecting Uponor insulated pipes, including subsequent insulation of pipe connections and connectors.