Simple and in an inexpensive way To renovate the area near the house or on the playground, making crafts from ordinary plastic bottles. With a little time and imagination, you can create from this universal material everything you can do with your imagination. You can, for example, make a banana tree. And so that you can understand how to do this, we created a master class on a palm tree from plastic bottles that are unnecessary on the farm, quickly and easily with your own hands, it contains detailed step by step instructions and photo and video lessons.

This tree will serve as a wonderful decoration for a holiday for children or a theme party. The more plastic bottles you use to create one palm tree, the taller and more magnificent it will be.

Making a palm tree from plastic bottles with your own hands step by step

To create a palm tree we will need the following materials:

1. Plastic bottles of different sizes and colors
2. Scissors
3. Scotch
4. The basis for the future palm tree. Usually a metal rod is used.
5. The frame for the future palm tree is a thick wire or metal pipe.
6. Styrofoam or artificial bananas
7. Yellow paint
8. Wire

Making a palm tree trunk:

1) In order to make a palm tree trunk you need to take bottles Brown 1.5 liters 2 and 2.5. First you need to trim the bottle from the neck side by about a third. You will need the upper part, but don’t rush to throw away the lower part - you can also make a barrel out of it by analogy.

2) Cut the bottom of each bottle with a heated knife. We will attach the frame of our palm tree to this cut.

must be cut into 8 equal parts that part of the bottle that has the neck. You need to cut from the wide edge to the narrow.

Now we need to make these parts pointed in shape so that it looks like a petal.

3) Bend the resulting petals onto outside– it will look like a blooming flower.

Palm foliage:

1) In order for our banana tree to have leaves, you need to take bottles of green (preferably different shades), white and yellow. The more colors you use, the brighter the palm will look.

2) Cut off the edge of the neck and the base of the bottle. We cut the resulting blank from the bottom of the bottle towards the narrow part into 3 approximately equal parts, but not all the way. There should be about 3 cm left to the end of the bottle. We give the edges of each part a shape like a narrowed semicircular petal. We begin to carefully bend these petals outward just as we did the trunk of a palm tree. The result will be something vaguely reminiscent of a three-bladed fan. Now we cut each resulting sheet from the edge to the middle. You need to leave a little uncut space in the middle - about 2 cm. It looks like a fringe. The narrower the width of the strips you make, the more magnificent the fringe will turn out, and therefore the foliage of our palm tree.

3) Now the fringe strips need to be folded into different sides. 1- bend it up, 2- leave it as is, 3- down. This is how the sheet becomes voluminous.

4) There are 2 ways to decorate leaves. In the first case, we leave our blanks as is, and in the second, the blanks need to be strung on a flexible wire to create long, voluminous branches. In the second case, you will need more bottles, but the palm tree will also acquire a luxurious crown.

Top of a palm tree.

We take a dark brown bottle and cut it like a blank into leaves - from top to bottom to thin stripes. We collect the pieces and wrap them inside.

Palm tree decoration.

We cut out blanks for bananas from polystyrene foam and paint them with yellow paint and carefully pass them through top part thin wire.

Collecting a palm tree:

1) Take a palm tree frame prepared in advance. This could be a thick wire or a metal pipe. And we begin to put the finished barrel blanks on the frame with the neck down. We put on the blanks first bigger size and we begin to compose the details like a designer. We compose until there is approximately 30 cm left to the edge. Try to arrange the petals of each part in a checkerboard pattern. We secure the parts at the base with glue or tape.

2) Depending on what kind of leaves you chose to make, there are 2 methods of attachment: 1-We begin to attach palm branches to the remaining empty upper part of the trunk. This is done in the same way as the trunk was assembled. Don't forget to use details different colors and arrange the leaves in a checkerboard pattern. 2 – attach the cable with the leaves strung on it to the frame of the palm tree at the very top and secure each leaf with tape.

3) Install the crown - glue the workpiece to the edge of the frame with the neck down.

4) We tie artificial bananas to palm branches

To secure our palm tree, we stick a metal pin into the ground about 30 cm deeper for stability (if desired, you can fill it with concrete), but so that at least 40 cm stick out from the ground - to string the trunk and put our palm tree on top.

Now our palm tree made of plastic bottles is ready.

Video on the topic of the article

For clarity, we also suggest you look detailed videos lessons on how to create your own banana tree.

Now it is becoming fashionable to equip garden plots with artificial trees. If during the hot summer your family likes to frequently drink refreshing soft drinks, then you should not throw away the containers from which you can make a palm tree from plastic bottles. Such a decorative product will significantly decorate any area of ​​the country yard. Making an overseas site is not difficult. This will require a large number of bottles and some personal time.

Benefit from the idea

Plastic food containers are made to store various drinks, and, as a rule, the material does not decompose quickly and can rot for hundreds of years. In addition, if there are no specialized landfills at the place of residence for the disposal of such waste, then people will have to throw away the containers near their home. This, in turn, will pollute the area.

Of course, you can find a different approach and burn the garbage, but this will pollute the atmosphere; in addition, there are already enough harmful sources that destroy the environment. There is another unique approach - plastic bottles can be used to make some decorative items, for example, palm trees.

From such a seemingly useless container you can make evergreen tree. You just need to take bottles of brown and green colors. If there are children in the family, then it is advisable to involve them in such an exciting activity. You can decorate with a plastic palm tree:

• empty garden plot;
• the area located near buildings;
• playground for children;
• house area;
• a piece of land near an artificial pond.

An artificial palm tree brings great effect if it is located near a playground. This a win-win, children will rejoice at such a creation.

Even those parents who are not at all versed in creativity can make a palm tree.

If you only have transparent drink bottles, then don’t be upset, because purchasing paint will correct the whole situation. The leaves turn green and the trunk turns brown.

Materials and tools

Before starting work, the master needs to stock up on everything necessary. It is worth noting that the larger the volume of the bottle, the more magnificent the artificial palm tree will be. List of tools and materials for making an evergreen tree:

• long plastic pipe or iron fittings;
• braided wire or thick rope;
• tape or glue;
• plastic bottles;
• scissors or stationery knife;
• If you are using transparent containers, purchase brown and green paints.

If there are a large number of bottles available, then it is advisable to choose the same sizes. In this case, the tree trunk will look much more beautiful. But bottles for leaves can be used different diameters. Small ones are suitable for creating foliage in the center of the crown. Half-liter or liter brown containers are useful for small palm branches. It is not necessary to look for the container that has a certain green tint. You can combine colors. It will even improve the palm tree.

Step-by-step production of a man-made tree

To do a quality job, you need to carefully study all the nuances of creation. plastic palm tree. According to the stories of craftsmen, assembling the structure takes only a few hours. A palm tree made from plastic bottles is built with your own hands step by step in four stages:

• creating a plan and choosing the location of the structure;
• installation of prepared foliage;
• barrel manufacturing;
• turning all the parts into wood by fastening them.

Important! Found bottles must be washed from dirt and thoroughly wiped with a rag. Pasted labels also come off. To do this, simply lower the container into warm water until the paper becomes limp and wipe it off with a cloth.

In fact, there are many tutorials on how to make bottle palm trees. But this option is the best and most popular, because the result is a truly realistic tree. And if you find large bottles, the tree will become more magnificent and beautiful.

Drawing a sketch and selecting a site

At the beginning of the work, a simple sketch is created and you need to calculate required amount bottles for the entire structure. It is important that there are enough bottles for assembly, otherwise you will have to go looking for other vessels. The first stage of how to make a palm tree from plastic bottles:

1. The diagram shows the size of the barrel and other details.
2. Then the location of the product is selected. It is enough to go out into the courtyard of the dacha and take a close look at exactly where the structure will look best.
3. If there is a gazebo at the dacha, then it would be great to install artificial trees near the building.
4. You should not place the palm tree in areas through which traffic will move; naturally, the structure will interfere. For example, it is not recommended to place a tree very close to the gate.

In any case, all the details are thought out.

Foliage cutting

After preparatory work Palm leaves are made. You will need to take a stationery knife or scissors, cable or rope. How to make a palm tree of their bottles - the second stage:

You can make different crowns, but, as experts say, for a good effect, the tree must have at least 8 leaves.

In this case decorative design will become aesthetic. For further assembly of the entire structure on ready-made leaves a long stalk is attached.

Making a barrel

At this stage the barrel is made. Take brown bottles and measure a few centimeters from the edge of the bottom. In this case, the bottom is also not required. The third stage of how to make a palm tree with your own hands:

1. You need to make longitudinal cuts to get identical petals. The cut is made from the very edge where the bottom was cut off, not reaching the end of the neck by 10 cm.
2. In this way, all the details of the future trunk are prepared. Only in this case you should not make thin strips, but rather make 8 or 16 parts on the bottle.
3. At least 8 branches are attached to the main trunk. It will be good if reinforcement is used. You can cut a certain number of rods and weld them.
4. Assembling the trunk is similar to making the foliage. On a plastic pipe or metal fittings finished parts are strung one after another. To make the palm tree stable, a wooden platform is attached at the bottom of the trunk. It is enough to cut a piece of plywood and screw the pipe. And if reinforcement is used for the barrel, then 2 short rods are welded in a cross shape. Then a barrel is attached, which is welded to the structure.

Some craftsmen simply take and plant the rod deep into the ground. In any case, there are many ways to install the barrel.

Securing all parts

On last stage All parts are connected. To install the structure, you need to take the blanks to the chosen place and carefully lay them out, especially the foliage that is on the rope - you must try not to scatter it. The fourth stage, how to make plastic bottles palm tree:

1. The tree trunk is installed in the selected location. It can be driven in or secured to the platform. But it is important that the product is sustainable.
2. Now the lids on the leaves are unscrewed, and the blanks are placed on the branches of the palm tree. The parts are secured with glue or tape. But it is important to carefully glue the outermost sheet, which should fix all the lower ones. This way the entire top is created.
3. In principle, the design is ready. It remains to correct some parts that were skewed.

Usually one palm tree is not enough. It is advisable to make at least 3 pieces. After installing all the trees, the area is covered with sand. Further along the perimeter decorative zone stacked natural stones. They will not only decorate general form, but also will not allow the sand to wash out during rain.

Paper palm tree for apartment

Craftsmen make many crafts using glue and colored paper. Such creations will not only delight the whole family, but will also decorate the interior of the apartment. A paper palm differs from a plastic one primarily in material and design. And it will take very little time to make. First, tools and materials are prepared:

• scissors;
• brown paper;
• green paper;
• copper or aluminum wire 30 cm long;
• glue.

After preparing everything necessary, they begin to make the tree trunk. You will need wire and brown paper. You need to wrap pieces of paper around the wire so that they are pressed tightly. Then take another sheet of brown paper, and cut strips 3 cm wide on it. Each element is folded 7 times, from which you need to make a fringe.

Next, the blanks are glued to the frame, on which the primary layer is tightly wound and fixed. A strip is taken and inside Glue is applied, and then the material is tightly wound at the very base. To obtain the barrel volume by specific area the frame will have to be wound with several pieces of paper. That is, the first layer, then the second, and then the third.

After making the barrel green leaf paper is divided into 4 parts. The same procedure is done with another sheet. On a piece of paper you need to draw the shape of a palm leaf with a pencil. Then the leaf shape is cut out with scissors. There will be 8 such parts. Also, several sheets are prepared, 2 times smaller than the previous ones - they will be installed at the very top of the craft.

On last step All parts are assembled. First, a paper platform is constructed and a palm tree trunk is glued to it. Craftsmen use thick cardboard, but yellow color. After gluing the part, the foliage is secured. Using glue, several small sheets are installed on the top.

After which the remaining leaves are glued at the same pitch. Job is done. All that remains is to choose a suitable place to place the product, for example, on a table near the window.

Realistic coloring

If you have minimal artistic skills, you can make a truly realistic paper palm tree. The tree is assembled in stages from the same materials, only ordinary dense wood is used. White paper, and will also require paints.

After assembling the tree, you need to arm yourself with a brush and put a photo of a real palm tree in front of you. The main task: to draw various details on the product. This does not mean that, for example, the trunk is painted with one brown. First applied light shade brown, and then, where there are shaded areas, they need to be brushed, but only with a darker shade.

After base layers All details are drawn until the master achieves realism. Such manipulations are also carried out with foliage. You need to draw veins, dark and light areas, and so on on them. At the end, chiaroscuro is applied. Are used pale colors. The process is long, but the work will be worth the wait.

Attention, TODAY only!

I want to decorate the yard unusual plant, but you don’t have any time to plant a seed and wait for it to grow? Then a budget and quick option is perfect for you - a palm tree craft made from plastic bottles. This artificial plant decorate the dacha or a private house, will delight the household and surprise all the neighbors, because for our climate, a palm tree is an amazing natural phenomenon. This plastic craft not only looks realistic, but also glows in the sun, delighting little children. How to make a palm tree from plastic bottles step by step?

Not all plastic containers will look good with each other. It is better to immediately put transparent bottles aside, because you will need containers of brown and Green colour. These can be bottles of kvass, Sprite and 7 UP drink. You can buy a drink, free it from sheets and wrappers and gradually collect containers. For a large craft you will need about 14 green bottles and 20 brown bottles. For a small palm tree, the amount can be halved.

Take containers that are easy to work with. The material should not be too dense. Be sure to use plastic containers so that you can cut them with ordinary scissors. Also, do not forget about safety precautions and do not let your child help you with cutting containers.

For a complete composition, you will also need an iron rod, which needs to be buried in the ground. It will become the basis of the trunk of the future tree. To ensure that the rod stands firmly in the ground, use a shovel or cover the iron with large stones.

How fewer bottles you use, the larger their volume should be. So, if you have 2-liter bottles piling up around the house, 10 bottles of each color will suffice. If you want to make a big palm tree, two-liter containers- ideal material. For a small palm tree, one and a half liter or liter containers are suitable.

For tree leaves it is better to take large containers, so the craft will look more magnificent. Before you start, make sure that your brown containers are smaller and your green containers are larger. How to make a palm tree from plastic bottles? The master class will help you in this exciting activity. Making the craft step by step is quite simple, so be sure to use the master class offered below.

Gallery: palm tree made of plastic bottles (25 photos)

How to make a palm tree from plastic bottles

Materials:

• brown containers (10–20 pieces);
• green containers (25–35);
• metal stick (approximately 50–100 cm);
• hot glue or double-sided tape;
• scissors;
• paper;
• cable;
• simple pencil.

How to make a palm tree with your own hands? Keeping it simple step by step master class, you can make a beautiful exotic tree with your own hands.

Master class: DIY palm tree made from plastic bottles step by step

1. Assembly starts from the bottom. First you need to take metal stick and stick it into the ground. Don't forget to make sure the base is strong and durable.
2. The palm trunk consists of brown containers connected to each other. It is necessary to cut off 1/3 of the brown container (bottom), leaving the upper part with the neck. From the top form a “flower” of 8 petals. Turn out the petals so that the part can lie on the table thanks to the petals. When forming the petals, you need to step back about 3-4 cm from the lid.
3. Prepare about 20 such parts. If you are planning to assemble a small palm tree, then 10 parts will be enough.
4. Place the parts on a metal bayonet, using the “one into another” or “glass into glass” method. It is best to additionally secure the first part with double-sided tape or hot glue.
5. You need to divide the green container in half, leaving the upper part.
6. Make cuts on the top of the green container, not reaching the lid by 5–6 cm. The thickness of the cut is 0.5–1 cm. The more cuts there are, the more magnificent the crown of the palm tree will be.
7. For one large branch you will need 5 bottles. There should be 7 branches in total. String 5 green blanks onto the cable (diameter - 12 cm). Secure all pieces with double-sided tape or glue.
8. Gather the brown and green parts of the palm tree together. Wrap the cable around a metal bayonet buried about 20–30 cm into the ground. A sheet of paper will help secure the “dangling” parts. The paper is perfect for securing, it is only important to make sure that it does not get wet.
9. Decorate the palm tree You can use artificial coconuts or bananas made from brown or yellow bottles. Your DIY exotic tree is ready!

Today you learned how to make a bottle palm tree. To make the craft lush, move the brown petals in different directions, so the plant will take on a completely different look. The finished tree can be decorated with plush monkeys or toucans. Further design of the craft is limited only by your imagination!

1. It is best to use straight brown containers for the trunk. This way the base of the tree will not be crooked. Containers of any shape are suitable for leaves.
2. If you have accumulated brown bottles different sizes, then it’s better to start assembling from the very big bottle, and finish the trunk with the smallest one. This will make the plant seem more realistic.
3. To prevent the bayonet from falling out of the ground, it is best to bury it deeply. 30 cm is an excellent option.
4. It is worth using plastic decorations to decorate an exotic tree. If it rains, plush toys with foam rubber may get wet and lose their original appearance.
5. Under the palm tree you can place a table with exotic fruits to complement the composition and create a decent atmosphere.

Do-it-yourself palm tree from plastic bottles step by step - simple and interesting craft. Making a plastic palm tree with your own hands is a pleasure! You can involve children in this activity to turn the activity into a family hobby. Perhaps the children will tell you how best to cut out this or that element and help you string the bottles onto the cable. Make sure that children do not get hurt. Under no circumstances let them cut the bottles themselves!

What gardener wouldn't want an exotic palm to decorate his garden? personal plot?

The first stage is preparatory. In order for the design of such an original decoration item to be successful, you must have everything necessary for this at hand. The main material from which the tree will be made is green and brown plastic bottles. We will use green bottles to create the leaves of an evergreen plant, brown ones for the trunk. The amount of plastic container determines the size of your tree, i.e. the more bottles, the taller and more luxuriant the tree; you will get the most luxuriant leaves using a 2-liter container. Before you begin crafting, all bottles must be cleaned of paper stickers and labels.

As auxiliary tool for mastery, you need to prepare:

• stationery knife
• sharp scissors
• wide tape for fixation
• metal base with rods, which will subsequently act as a trunk
• rope with which you will tie the bases of the leaves on the palm tree.

The next step is manufacturing the product itself.

Remember that in order for the tree to look aesthetically pleasing and beautiful, all bottles must be the same size and diameter. During production we will use two colors - brown and green, so if you have green bottles of “different sizes”, then smaller containers can be attached to the base of the crown, but as for brown ones, vessels of the same size are needed.

Making exotic wood involves three main stages:

Creating leaves;

Barrel assembly;

Collecting all the parts and shaping the tree itself.

Using a sharp stationery knife, cut the bottle into two parts, where the upper half will act as foliage, and we do not need the lower half. In the upward direction towards the neck, with scissors or a knife, the bottle is cut into small longitudinal strips, and this is done with each green bottle. Then such peculiar foliage from half bottles is strung on top of each other, connecting them with a strong cord or rope. A cork is screwed onto the last and first bottle, through which a tourniquet is threaded and tied in a knot so that the container fits tightly together. The top of the palm tree should consist of 5-6-7 leaves, so depending on the amount of containers available, you create your own tree, controlling the size and splendor.

After the foliage is fully prepared, we move on to the trunk. The barrel, as said earlier, is made from brown bottles of similar diameter, we cut off the lower base with a knife, after which wide longitudinal cuts are made towards the neck, there should be 6 such longitudinal fragments. After a similar action has been done with each brown bottle, they are attached to each other, like the green vessels, only the plastic barrel now needs to be put on a metal rod in a vertical position.

The foliage is fixed at the upper base of the trunk, evenly distributed on all sides. Using tape and a tourniquet, the leaves are attached to the trunk. Our tree is ready, all that remains is to find a place for it in your garden.

Let's move on to installation. Ideally, this is a welded metal platform; failing this, it is immersed in the ground by 40-50 cm. For the longevity of your craftsmanship, it would be good to compact the tree installation site with soil or concrete.

This evergreen tree of the African savannah will turn your garden plot into a real oasis!

A great idea is to decorate your garden with a palm tree. Exoticism, beauty, delight of guests. Palm trees in the garden are now at the forefront of amateur garden design fashion.

They make them from different materials, mainly from , but other options also happen. For example, excellent palm trees are made from, , etc. Ideas for the garden are so versatile in terms of materials and techniques that you can find in their depths such an example of a craft that will fit perfectly into the landscape of the site, and will impress and delight not only random hallways, but also the owners, and constantly.

What materials to use to create a palm tree

• Metal or plastic pipes of different diameters. Ideally, you need 3-6 pieces of such pipes (depending on the height of the palm tree). Such pipes are used for ventilation or drainage.
• Long metal pin (rebar) or metal profile. You can use a thin long one metal pipe.
• 1-2 sheets of galvanized iron. Galvanization is available in rolls.
• Fasteners: wire, bolts, nuts.
• The paint is green: if the sheet of metal whose purpose is to become palm leaves is not factory painted.
• Brown paint: if there is a need to paint the trunk of a palm tree.

How to make a palm tree for the garden. Master Class

First we prepare the elements of the palm tree and only then assemble it. There is no other way: a palm tree is a tall tree.

We cut metal or plastic pipes into pieces of the required length. If necessary, paint them and set them aside to dry.

Galvanized sheets can be painted on one side or both. The last option is preferable, as you won’t have to paint anything. If the sheet is painted on one side, paint the second. We do the same if we have sheets of simple unpainted galvanized steel at our disposal - we paint them on both sides.

On a sheet of metal with a marker we sketch out the leaves. They should be large enough to look harmonious with the trunk. If the palm tree is very tall, we take this into account and make the leaves a little larger, otherwise they will look small from below.

Cut out the leaves. You can do this using tin snips or a power tool.

We slightly bend the leaves (see photo). In this case, they will hang beautifully and “naturally” from the top of the palm tree.

We attach the leaves to the pipe, which will be the final element of the trunk.

We fix a thin metal pipe in the ground or metallic profile. For reliability, it is better to concrete the pipe/profile into the ground, but if there is no such desire or opportunity, the pin must be inserted as deep as possible into the ground. Compact the soil around the pin as best as possible.

We put pipe sections on the pin. At the bottom of the trunk there are pipes of a larger diameter, at the top of a smaller one. The last thing to put on is the element with leaves.

The palm tree is made and it is truly luxurious.

Leave your review