Thanks to their thoughtful design, sliding wardrobes save a huge amount of usable space. The “Basya” sliding wardrobes performed especially well.
How to assemble a wardrobe?
Assembling the Basya sliding wardrobe does not present any difficulties for a person who knows how to use tools. Such furniture can be placed not only in the bedroom, but also in the country house or in the hallway; everywhere this furniture will look completely relaxed and organic.
“Basya” perfectly matches the format of budget furniture. Compared to other Basya models, it costs two and a half times less, but it also looks very presentable.
Instructions for assembling the wardrobe are included with each unit of product, but difficulties still arise from time to time in its layout, especially in the question of how to assemble a wardrobe for a beginner. In addition to the manual, it is recommended to watch the video materials on the website, which show in detail how to assemble the Basya wardrobe.
Wardrobe diagram "Basya"
The “Basya” cabinet is assembled as follows:
- First, the frame is installed. All cabinet components are marked and numbered, so it will be easy to work. Assembly begins from the bottom corner. The side wall is connected to the bottom using self-tapping screws, and another wall is installed in parallel nearby. Before doing this, it is better to look at the photo in the instructions.
- After the frame is assembled, the back wall comes into play, which is attached with small nails to the assembled base. Also, instead of nails, 3 mm screws are often used.
- The product should be assembled from top to bottom, the wall is fixed on both sides, it gives rigidity and stability to the entire structure. It is very important to control that there are no distortions. For these purposes, use the following tool:
- construction square;
- good meter level;
- roulette;
- plumb line
If there is the slightest distortion, the door will not close well and it will be impossible to fully use the cabinet.
1
2
3
The assembled frame is prepared, which means it’s time to attach the back panel; it is attached both from the outside and from the inside. After completing this assembly phase, it is recommended to test how smoothly all the elements are fastened, and if something is done incorrectly, this will negatively affect the operation of the product, and the service life will be noticeably reduced.
- After the frame is installed, the installation of the shelves begins. They are fixed with the help of special cylindrical wooden blocks, which are called chopiks. Moment glue, screws, and dowels are also actively used. It should be noted that all markings are on standard parts, so the process of installing blocks does not present any difficulty.
- The most important step is the door layout. It is very important that there are no distortions, then the door will close and open normally without effort. In this case, it is important to install the guides correctly.
- After the door is installed, a mirror is mounted on it. How to attach a mirror, it is recommended to look at the assembly diagram of the Basya sliding wardrobe with a mirror.
- After the assemblers have completed the main work, the fittings can be installed.
As you can see, the description is quite accessible even for a primary school student. You can determine the correct installation of the Basya wardrobe by some characteristic features:
- the product rests on the floor, without any distortions;
- there are no gaps at the joints;
- the door opens and closes silently without any effort.
Having made sure that everything is fine, the “Basya” cabinet can be safely used, loading it with contents.
Assembling furniture yourself can help you save a lot of money cash. It’s good if a person has simple skills in assembling objects. It will be useful for beginners to learn how to assemble a wardrobe themselves. Step by Step Actions installation of each element of the product will allow for quick installation.
Among all types of clothing storage products, the leading place today is occupied by the wardrobe. It is multifunctional, spacious, and comes in different forms and sizes, and also does not require additional space to open doors. That is why most people, when choosing between a wardrobe and a sliding wardrobe, prefer the latter option.
Assembling a sliding wardrobe with your own hands in the video presented is not at all difficult - all you need to have in your apartment is necessary tools and be familiar with the design of the product. Often, when ordering a cabinet without the services of assemblers, the company sends a document that contains a drawing of the product. This also lists all the component parts, which are numbered in order. By looking at the drawing and comparing the elements of the cabinet, you can intuitively assemble the product.
To work according to the sliding wardrobe assembly diagram, you will need the following tools:
- building level– to check the levelness of the installation parallel to the floor;
- corner;
- rubber and regular hammer;
- straight and Phillips screwdriver;
- roulette;
- pencil and ruler;
- screwdriver;
- wood drill - to make holes;
- metal drill – for installing an aluminum base.
Additional tools for assembling furniture yourself include a jigsaw, drill and sandpaper. It is also necessary to prepare all the details of the cabinet, which means checking the diagram to ensure that the number of items matches. Pay attention to the fittings and mechanisms: if there are drawers in the closet, ball guides should be included.
Doors for the product are often supplied ready-made. They are pre-installed with rollers and strip soft material. The door must be installed in the final phase.
Tools
Assembly steps
To know where to start, it’s worth familiarizing yourself with its stages. Most sliding wardrobes are assembled according to the following algorithm:
- base;
- frame;
- installation back wall;
- installation of shelves and guides;
- installation of compartment doors.
After the completed stages, the implementation of internal additional elements. These include pull-out baskets, drawers, rods, hanging hooks and pantographs. Let's consider the installation of each cabinet element separately.
Assembly steps
Base
The assembly of sliding wardrobes, the video of which is presented below, begins from the bottom part, which bears the entire load during operation. We find a part that will perform this function and place it in front of us. In order for the process to proceed correctly, we use tools such as screwdrivers or a screwdriver, a hexagon, a pencil and a tape measure for marking. Also check the package for the presence of self-tapping screws and special masking plugs.
The algorithm of actions looks like this:
- on the part for the bottom, the place for installing the base is marked;
- sometimes, instead of base strips, adjustable legs are used, the place for which also needs to be marked;
- drill holes for fasteners;
- we attach the bottom to the slats using confirmata (corners) - for this we use self-tapping screws and a screwdriver;
- We assemble the transverse supports of the plinth, designed for stability.
Some products, such as the Phoenix coupe model, require installation using adjustable legs. This is easy to do: the plastic plugs are cut off with a knife, and the legs themselves are screwed into holes prepared at the bottom with a diameter of 10 mm.
Depending on the size assembled cabinet coupe, the number of legs will be adjustable. So, for large planes more than 6 support elements will be required.
Preliminary marking of the cabinet base
The easiest way to assemble the base is on furniture metal corners
Installing the feet
Finished plinth with legs
Frame
Before disassembling and assembling sliding wardrobes from scratch, it is important to familiarize yourself with general structure existing product. Study the diagram carefully, because the assembly of the case should ensure safe operation closet The stability of the internal elements will depend on how securely it is installed.
In order for the furniture assembly to be accurate, you should additionally check the floor surface for evenness. Use a building level: if there are differences on the floor, tighten the adjustable legs. Only after this assemble the product box.
To ensure quality installation of the housing, follow these steps:
- It is better to assemble the product while standing, because it is very difficult to install a perfectly fitted cabinet in a lying position. But it is important to remember that for complete assembly it is necessary to leave at least 100 mm for the installation of the roof;
- in the part that is responsible for the bottom, you must first drill several holes and insert anchors. Rack strips will be mounted on the installed fasteners;
- Installation of stand-up panels is carried out by two people: in order not to get confused, you can view the instructions for assembling the sliding wardrobe presented in the video. The left side panel is inserted first, one person holds it while the second person inserts the right side panel;
- at the next stage, the middle stand is installed, if present. After its installation, the roof is installed. If the cabinet is assembled in a standing position, then this part will be properly secured to the corners or confirmations.
It is a little more difficult to assemble a maestro model sliding wardrobe, which has many functions. Its installation is carried out slowly, preferably by several people.
Fastening occurs using euroscrews
Installing the side and interior walls of the cabinet
The base is connected to the body using confirmat corners
Rear wall installation
To assemble the coupe yourself, in particular to attach the back wall of the product, you need to choose wisely Consumables– fasteners. Often, assemblers use incorrectly selected consumables, which is why, over time, the fiberboard panel comes away from the furniture product. In Soviet times, hardboard was assembled onto the back wall using nails, which is undesirable to do today.
For greater reliability, attach the fiberboard wall to the cabinet using self-tapping screws. This is how the product will not be damaged during operation.
When assembling furniture for yourself, it is important to carry out high-quality assembly of the sliding wardrobe with your own hands: the video presented below clearly shows all the complex nuances. Perform the following manipulations:
- place a hardboard panel behind the cabinet;
- Holding the sheet with your hands, use short self-tapping screws and use a screwdriver or screwdriver to screw them in at a distance of 10-20 cm.
If the cabinet has several back walls at once, they must be secured end-to-end. Use special tightening fasteners, and then screw the screws into the back of the middle bar.
Rear wall mounting
Installation of shelves and guides
To avoid having to disassemble the product and redo your work, check the reliability and stability of the frame, and then proceed to fill it with internal elements: shelves, rods, drawers and guides. Study self-assembly you can see the wardrobe using the video at the bottom of the article. It clearly provides information about all important points process.
You should pay attention to the following nuances:
- The shelves can be secured using corners and self-tapping screws. To do this, the parts themselves already have drilled holes. First, we note the distance between the shelves and attach them to the sidewalls and the central stand bar;
- First, the upper door rails are installed, after which the lower rails are installed. It is worth emphasizing that the installation of these elements must be carried out strictly in a straight line - the correct movement of the doors will depend on this;
- The rod is installed on special flanges that come with it. If necessary, the length of the pipe is cut with a hacksaw. If you are assembling a Fortune model cabinet, you should pay attention to a large number of elements and do not confuse them;
- drawers and pull-out baskets are inserted into the product after attaching the mechanisms for their operation.
Before you install it yourself internal filling, check the availability of all accessories and consumables.
Guide sliding system
Preparing holes on the guides
Before installing the guides, the stopper must be positioned correctly
IN Lately sliding wardrobes are becoming increasingly popular. They are compact and convenient for storing all your daily necessities. The sliding door hides not only clothes, but also shoes, accessories and even necessary household appliances. This allows you to save a lot of space in your room due to rational use every centimeter of your room.
A sliding wardrobe can be installed not only in the bedroom, but also in the living room or hallway. It does not take up much space, so it will fit even in a small apartment. All these characteristics are relevant for a simple and inexpensive Basya wardrobe, which will be discussed in this article.
Characteristics and Features
This cabinet is perfect for those who are slightly on a budget and looking for an inexpensive cabinet in a compact size. This model costs two or even three times less than its analogues, but at the same time it looks just as good and serves no less. It is available in several basic colors, so you can choose a cabinet that will fit perfectly into any interior you choose. The closet is spacious enough, so you can fold and hang in it not only things from your basic wardrobe, but also things that you don’t currently wear or use.
The only drawback that almost all buyers note is the difficulty in assembling it. More precisely, the lack of simple and clear instructions, which explains in detail how and in what sequence you need to assemble Basya’s wardrobe.
How to mount
The easiest way to deal with all the complexities of installing a Basya wardrobe is to entrust this process to professionals. But, if you don’t want to spend extra money, or are simply used to doing everything yourself, then you can try to assemble your furniture yourself.
This process begins with the installation of the frame. All design details are marked with a special number, which is also indicated on the drawing. Assembling the wardrobe body begins from the bottom corner. To do this, one of the side walls is attached to the bottom. A parallel wall is installed nearby. The installation is completed by fastening the roof.
When the frame is ready, you can nail the back wall to the base. Chipboard sheets are attached using self-tapping screws. They begin to be fixed from above and fall down. The back wall must be secured both from the outside and from the inside. After completing this process, it is advisable to check whether all parts are securely fastened - an installation error can significantly reduce the life of the cabinet.
Having secured the main parts, you can fix individual shelves inside the cabinet. To secure the five shelves, you will need self-tapping screws, wooden dowels, glue and a drill. Top tip, which is worth remembering when installing shelves - you need to start at the top and work your way down. When installing shelves, pay attention to the fact that their front edge is in front, and not rough, raw edges.
The most difficult step is installing the door. Sliding mechanism Wardrobe doors must be installed so that the door opens and closes well. How convenient it will be for you to use the wardrobe depends on how correctly the mechanism is installed. All rollers and fixing elements are included with the main parts. Additionally, there is also a mirror for the facade on a film basis. Finally, after all these procedures, close all visible holes with the decorative plugs included in the kit and check the quality of the assembly.
You can determine the quality of the Basya wardrobe based on several simple details. First of all, a well-mounted cabinet stands level on the floor, without tilting anywhere. There are no cracks or openings at the fastening points. And the compartment door slides smoothly when opening and closing and does not make any unnecessary sounds. A properly installed closet can be moved to the desired area and you can start filling it with things.
6253 0 0
DIY wardrobe assembly diagram in 5 steps
Out of a desire to save money, people often buy disassembled cabinet furniture in the hope of assembling it themselves. Indeed, instructions are included in any kit, but in reality, the assembly diagram of a sliding wardrobe has many nuances, and so that upon completion you do not have “extra parts” and the wardrobe is durable, we will analyze the entire process in detail and, for convenience, we will break it down into 5 steps.
Tools and preparation for assembly
You won’t need too many tools, but you won’t be able to get by with just one screwdriver; manufacturers issue the kit with 90% readiness, the remaining 10% is written off for fitting the furniture to a specific location.
- Confirmed key, manual hexagon (often included in the kit);
- Steel hammer;
- Rubber mallet;
- Screwdrivers – Phillips and straight;
- Roulette;
- Awl;
- Confirmed drill;
- Metal drills – 4 mm and 6 mm;
- Screwdriver;
- Square;
- Pliers;
- Level (regular bubble).
Now we need to prepare workplace, on the assembly site the cabinet must be placed in any position - lengthwise, across, diagonally and even lying down. All this is needed so that you can attach the back panel made of fiberboard, and then get out of there and push the cabinet into the place intended for it.
Do not hope that the set is complete; be sure to check the presence of all parts when purchasing; furniture is assembled by hand at the factory and the human factor must be taken into account.
Assembling a closet in 5 steps
Furniture in the budget sector is made either from laminated chipboard or laminated MDF; assembling these cabinets by hand is not difficult, but it is advisable to take care of an assistant, at least for support.
Step #1: Assembling the base
In this case, we need to install the legs on the base plate and secure the fittings for subsequent installation vertical walls closet
| Illustrations | Recommendations |
 |
Legs are marked.
In some models, legs are not provided at all; they are installed on stands made of the same laminated chipboards, but more often the set includes adjustable legs. Here you need to see if there are holes in the base plate for these legs; if they are there, then assemble according to the diagram shown in the photo on the left. |
 |
Legs are not marked.
This situation occurs in budget models. You need to mark the mounting points and screw the legs to the base with self-tapping screws.
|
 |
Mounting hardware.
The vertical walls are secured with pins for minifixes, the standard diameter is 4 mm, but there are other models. |
 |
Installation of pins.
There are ready-made holes in the base for these pins; you just need to take a tool and screw them in.
|
Step No. 2: assembling the body
If up to this point you could do everything yourself, now it’s time to call an assistant. It is needed to keep the walls vertical. There is no need to fix the cage to the base right away; first install the shelves so that the cage stands on its own.
Horizontal shelves are assembled using furniture confirmants; they are also called Euroscrews. In ready-made kits, the holes for them are already drilled; you just need to insert the confirmant into these holes and screw it in tightly using a hex key, then cover the head with a plastic plug.
It is better to screw in the confirmands manually with a wrench; if you use a screwdriver, you can overtighten and break the thread.
Now it's time to firmly attach the cage and shelves to the base and top lid. For these purposes, so-called minifixes are used; they are something like a “tablet” with an eccentric inside.
The diameter of furniture minifixes is 16 mm when you install vertical racks onto the pins, the head of the pin will be visible in the side hole of the post. A minifix is inserted into this hole and turned clockwise.
Thus, the two elements are tightly pulled together. In this case, the technology is the same both for attaching the base and for fixing top cover.
Step #3: back wall
The back wall in such cabinets is made of painted hardboard (dense fiberboard). The sheets are cut on machines, so there is no doubt about their shapes, the problem is that the back wall is composite, that is, it is assembled from several sheets, so assembly takes place in 3 stages:
- First, you need to check how smoothly you assembled the box. To do this, we use the old-fashioned method - we measure the diagonals. The size of both diagonals should be the same. If something is wrong, check the tightness of the minifixes; usually small deviations are caused by uneven tightening;
- Now call an assistant and ask him to hold the box in the desired position (so that it does not skew in any direction). At this time you apply bottom panel hardboard to the back wall and nail it to the posts with nails or screw it with small screws;
- Next, put the plastic H-shaped connecting profile on installed panel and mount the next one in exactly the same way. The minimum step for fixing panels on racks is 100 mm, well, this is at your discretion, for example, in soviet cabinets The back wall was fastened with self-tapping screws at 30 mm intervals.
Step No. 4: installation of door guides
Before installing the guides under sliding doors, the base of the cabinet should be set clearly to the horizon, with level control. This can be done using adjustable legs.
| Illustrations | Recommendations |
 |
Equipment.
Budget models use roller doors supported on a bottom rail, with rollers running along it. On top there are W-shaped profiles that control the movement of the door leaf. |
 |
Attaching the upper profiles.
All profiles come without mounting holes; you will need to drill them with a drill with a diameter of 4 mm. Then screw the profile with self-tapping screws to the top lid of the cabinet. |
 |
We put stoppers.
Stoppers are needed so that the door rollers are fixed in them and the doors do not move apart spontaneously. You just need to take pliers and insert the lock into the groove of the profile. |
 |
Lower profile fastening.
The instructions are similar: drill holes with a diameter of 4 mm and attach the profile to the base with self-tapping screws (the stoppers should already be in place). |
A sliding wardrobe is one of the most convenient and compact ways to store things. It has small shelves for light items of clothing, and large ones for bulkier items, there are compartments for storing skis, a compartment equipped with a rod for placing outerwear, etc.
The compactness of the closet is made possible by sliding doors, which do not require space to swing open; they move on special rollers located inside the structure of the door itself. Even a person inexperienced in such matters can assemble such a cabinet, since the assembly principle is quite simple and does not require the use of special tools.
Read the instructions and sort the parts
First, you need to carefully read the instructions and understand the individual parts - find the lower and upper elements, side posts, internal partitions.
If you mix up even one part, you are guaranteed to have to disassemble the newly assembled structure and reassemble everything again. Therefore, it is so important at the initial stage to correctly determine the location of all parts of the cabinet.
Assembling the frame
First we install the base (bottom element).
As a rule, this plate is attached to stands located along long side, using confirmations (these are so-called Euroscrews that have a recess in the head for a special hex key).
Installing internal partitions
At the lower end of the partitions there are holes into which dowels must be inserted before installation.
A dowel (chopik) is a small piece of rod round section, used to strengthen wooden joints.
There are blind holes in the bottom plate, which are intended for such dowels. Having aligned the dowels and holes, we install the vertical partitions in their place (an assistant will be needed here).
We fix the shelves
Now, in order to prevent the structure from becoming loose, we install shelves, which in this case act as stiffeners.
We secure them with confirmations.
At this stage, fasteners must be screwed in completely, leaving no free play.
We install the side racks and the top cover
Now the final part of assembling the frame is the installation of the side posts and the top cover. All three elements must be installed simultaneously.
Although this action depends on design features and the location of fastening points on these parts. First, we install the sidewalls, fastening them at the bottom with the base with confirmations.
Then we put the lid on top, align the holes in all the parts and also tighten the fasteners. Here you need to leave a little free play, since you will need to level the entire frame.
Aligning the structure
The alignment process consists of the following steps. It is necessary to use a tape measure to first measure one diagonal, then the second and, based on the difference in values, determine in which direction you need to “press” (move) the top of the cabinet so that its corners are perfectly straight.
Now you can wrap the confirmations to the end with force.
We nail chipboard sheets
The next step assembly will involve nailing fiberboard sheets to the back of the cabinet.
These sheets will not only serve as a back wall, but will also reliably keep the structure from loosening throughout the entire period of operation.
As a rule, the canvases have a decorative treatment on the front side in the form of a laminated colored surface. The sheets are fastened using small nails, which must be driven into the ends of all cabinet elements (racks, partitions, shelves).
Here it is important to guess the place of nailing, because with reverse side cabinet parts are not visible, and damage resulting from incorrect selection has a negative impact on appearance products.
We place the rails - guides
Now the most crucial moment is the installation of the lower and upper rails for the doors. The bottom rail has two grooves for the movement of rollers:
And the top is divided into two sections:
In both, you must first drill holes for screws to attach them to the base and cover.
The holes must be chamfered to allow the screw to be screwed in flush.
It is enough to make 4 holes in each plank. We fasten the bottom rail first, marking the corresponding fastening points.
The distance from the edge of the base to the leading edge of the rail should be 2.5 cm.
To ensure that the doors do not jam and they move evenly, it is necessary to install the cabinet strictly horizontally, which can be done using a regular building level.
The longer the level, the more accurate the horizontal indicators will be.
The top rail is attached in a similar way with the only difference being that you need to drill holes in a checkerboard pattern in both compartments.
Screws from the set supplied with the cabinet are used as fasteners.
From the front end of the top cover to the beginning of the edge of the rail, the distance should be 2 mm.
We install rods and fittings
Final construction stage There will be a rod installed to accommodate outerwear.
First you need to mark the attachment points for one holder (it is secured with 3 screws), drill holes and tighten the screws.
Then install the second holder on the rod, pressing it with a screw.
The assembled structure must first be tried on, aligned horizontally, and then outlined and attached with the same screws.
We hang the doors
Before this stage, you need to check the gutters in the lower bar for the absence of debris that will interfere with the movement of the rollers, once again make sure that the planes are horizontal and check all connections for rigidity.
The door is first inserted into the top rail.
And then the end rollers need to be placed in the groove of the lower rail.
All 4 doors are installed in this way (the main thing is not to confuse the picture).
In principle, there is nothing complicated in installing a wardrobe. You just need to take a responsible approach to all stages of its assembly, and then you will not only receive advanced training as home handyman, but also certainly gratitude for preserving the family budget.
Assembly is complete - the result is in the photo
