Crafts from floppy disks 3.5. What can be done from an old hard drive. Beautiful crafts from CDs

Most people have accumulations at home a large number of unwanted or unusable CDs.

You can simply throw them away. But it’s better to use them to create various crafts and interesting things. In this article we will tell you what fakes you can make from disks with your own hands.

Roof covering

If you have a lot of CDs, you can use them as an original sparkling roofing. To do this, first the disks are attached to plywood sheets, and they, in turn, are attached to the roof. Approximately a hundred discs are needed for 1 m² of coverage.

They need to be attached as follows: 1st row - end-to-end, subsequent ones - in a checkerboard pattern, overlapping the disk holes of the 1st row. Small nails or screws can be used as fasteners.

Come up with a drawing, following which you will begin to make the roof. If you don’t have enough material, then you can only lay out the visor with it.

Fake discs for the garden

British artist B. Monroe, known all over the world for his light installations, decorated his garden area with stylized water lilies from CDs.

It took him 65 thousand CDs to create this work of art. You can take Monroe's idea as a basis and make these miniature lilies to decorate your own garden.

The discs can be used for the tail of a homemade peacock. They are attached to metal carcass tail using wire.

The disks can also make cute fish. To make one piece, you only need a couple of disks and multi-colored cardboard or a sheet of plastic.

The latter are used to make fins, tail and fish mouth. The cut out elements should be placed between the discs and carefully glued.

The disc caterpillar looks unusual and interesting. It will require several disks fastened together with screws. The legs can be made of rubber, plastic, plywood, and threads can be used for the mouth, eyes and hair. This craft is attached to the fence with wire.

Another option for using disks is the creation of street lighting fixtures.

Crafts from disks for children

Interesting ideas for children's crafts made from CDs will be useful for educators and teachers. primary school, moms and dads.

The disk can be used to create a beautiful postcard in the shape of a fish. This craft can be done even by three-year-olds. They can easily cope with it under the supervision of their parents. In addition to the disk, you will need PVA glue, scissors, plasticine, markers and multi-colored cardboard.

Fins, a tail, and a mouth cut out of cardboard must be carefully glued onto a CD, onto which plasticine must then be applied using the indentation technique. The next step is to make the eyes.

For this we use cardboard. After you have attached the eyes to the fish, you can make eyelashes from plasticine. The tail and fins are used to write congratulations.

From damaged CDs, using glue, multi-colored cardboard and colored paper, you can make Smeshariki, the popular heroes of the cartoon of the same name.

For beauty, the contours of figures, eyes, and mouth can be outlined with a marker. Such decorations are easily attached to a wall or cabinet using glue or double-sided adhesive tape.

From discs you can create original curtains that do not require washing. Required following materials: disks, paper clips, drill.

Small holes are drilled into the edges of the disks with a drill, and paper clips are used to connect them to each other. The number of discs, size and shape of the curtain depend on your imagination.

Curtain holders in the bathroom made from unnecessary disks will look great.

The discs can also be used to create unusual and interesting kanzashi-shaped curtain ties. And you can pin them Chinese chopsticks for food.

To make a pick-up, you need to cut a circle of smaller diameter from the disk. Wrap the resulting ring with satin or silk ribbons. You can use flowers made from ribbons as decoration; below are photos of crafts made from discs.

Disks can be used to make candlesticks, boxes, stands, needle cases and much more. Therefore, you should not rush to get rid of outdated CDs. With their help, you can sometimes create truly unique things.

The article gives several ideas on how to make many useful things from CDs: a box, a candlestick, a photo frame or a roof covering.

Many people have accumulated old CDs that become obsolete or become unusable. Of course, you can throw them away, but it’s better to store them and at some point use them for a global project, for example, to cover a roof. And from small quantities you can make interesting crafts.

Original disc roof covering

If you have accumulated a lot of such material, then you can make a roof covering from old discs. It will look literally brilliant, and will also not let moisture into the room due to correct location elements.

First the disks need to be attached to wooden base, for example, to plywood, and then to the roof. For laying one square meter you will need 120 pieces. They need to be fixed using this technology.

Place the discs end to end in the first row so that there are no gaps. In the second one, place it in a checkerboard pattern relative to this one so as to block the holes of the first one. The third row will also be located relative to the second in a checkerboard pattern, with the holes overlapping. This is how a scaly roof is made from old discs.

Those who have accumulated a lot of unnecessary vinyl records can also carry out similar technology, but using them.

However, let's return to the idea of what can be made from old disks. When laying them, make small holes. Secure parts using small nails or screws.

Come up with a pattern, following which you will lay such an impromptu tiled roof. You can place the discs either matte or glossy side up.

If you don’t have enough disks or records, then you can put them not on the roof of the house, but on the canopy.

See how English artist Bruce Monroe came up with the idea of using old disks. According to him, he wanted to enhance the natural beauty of the garden in this way. It took him 65,000 discs to make water lilies.

You're unlikely to have that much on hand, so you can make small water lilies or home decor items.

DIY rigid curtains made from discs

You won't need to wash them, just brush off the dust occasionally. Such curtains will decorate the room and add positive notes to it.

The manufacturing process is extremely simple. For it you will need:

CD disks;
paper clips;
drill.

Using the latter, make holes in two disks, placing them closer to the outer edge. Now combine these 2 disks using paper clips, attach the third to the second in the same way, and so on. You can make the curtain rectangular or the way it is made in the photograph. For each of the top three rows, 6 disks were used, for the fourth - 5, for the fifth - 4, for the sixth it took 3, for the seventh 2, and the last eighth consists of only one disk. In total, to make 2 similar curtains with your own hands, you will need 66 disks, 33 will be enough for one.

Such curtains can be easily fixed to the cornice; to do this, you need to use a sharp stationery knife to go through the markings of the larger inner circle, and then squeeze it out with your fingers to enlarge the hole. You can also use a drill for this purpose. Bathroom curtain holders are made using the same technique from old disks.

You can also make curtain ties using the same material.

Place a smaller round object on the disk. While holding it, trace it with a knife, then cut along the markings with scissors.

The resulting ring is decorated satin ribbon, which just needs to be wrapped around it.

You can decorate curtain tiebacks with satin flowers made using the kanzashi technique, and attach rings to curtains using sushi sticks. They can be painted or also rewound with satin ribbon, gluing it.

Beautiful crafts from CDs

Even from very old disks you can make a New Year's toy using fragments untouched by time. Cut out pieces from this material, which then glue to the Christmas ball like a mosaic. Wipe off excess glue with a cloth.

Using the same technique, you can decorate the collar of a blouse. For this purpose, discs are also cut into fragments. Then they need to be glued to the fabric.

To make a photo frame with your own hands, prepare:

thick cardboard;
PVA glue;
CD disks;
scissors;
black paint in a tube with a fine tip.

Make 2 identical rectangles from cardboard. For the first one, draw a circle or a 4-gon inside and cut it out. Glue this cardboard with internal hole on the second - solid. Glue together only 3 of their sides, leaving the top ones free. Through the resulting gap you will put a photo or painting into the frame.

Use scissors to cut the disks into individual elements. Apply PVA to the photo frame - it small area, attach the resulting pieces here.

Let your artwork dry, then fill in the gaps between the pieces with tube paint. When it dries, then you can use the frame for its intended purpose.

And from just one disk you can make a candlestick. For it you will need:

glass balls;
1 disk;
super glue or another one designed for working with these materials;
candle.

The photograph shows stages of work that clearly show how to make candlesticks with your own hands.

Cover the outer contour of the circle with balls. Glue the second row on top of these, arranging its elements in a checkerboard pattern. This way create 4 chains. All that remains is to attach the candle using hot wax and you can plunge into the romantic atmosphere.

Homemade jewelry box

It is made of the same material. Here's what it took to create this necessary thing:

3 disks;
textile;
padding polyester;
needle with thread;
scissors.

Take a sheet of paper and a compass. Draw 2 circles. The inner one will be equal to the diameter of the disk with a small margin - 12 cm, and the outer one - 20 cm. At the same time, the height of the box is 8 cm, you can change this value at your discretion.

Divide both circles into 16 equal sectors. To make your task easier, first divide in half, then into 4 parts, then into 8 and 16.

Transfer the pattern to the fabric or immediately draw on it. You need to make 2 such blanks from canvas. Now sew along the markings, making 16 stitches from the outer to the inner edge. Place padding polyester in the resulting pockets. Sew up the top of the disc box.

If you want to make handles, then weave a braid from three strips of fabric.

To make a lid for a box with your own hands, fold two pieces of fabric in a pile, place on a disk, outline with chalk, cut out with a seam allowance of 7 mm on all sides. Cover the disc on top and bottom with these fabrics. If you want the lid to be soft, then cut out two circles of padding polyester and cover the disk first with them and then with fabrics. Sew along the edges with a blind stitch.

Here's how to make a box.

How to make an owl from old CDs?

Try making this funny owl from this material. It will become a room decoration or an original gift.

To get started you will need this:

several disks (10–12 pcs.);
a simple pencil;
scissors with soft finger rings to avoid rubbing calluses;
scotch;
foil;
strong glue;
yellow and black cardboard;
ball pen.

Take two light discs and cut a fringe along their edges with scissors.

Cut out 2 circles from yellow cardboard; they should be larger in size than the holes in the disks. Cut out 2 smaller black circles from thick black paper and glue these bird pupils onto the yellow ones as shown in the photo.

From the dark areas of the disk, cut out the beak, 2 eyebrows and 2 paws of the owl.

Do not throw away the remaining pieces. You need to draw leaves on them and also cut them out. These elements will be useful for decoration.

Glue an eye to the center of each disc. Glue these two disks together and attach the beak to them. Take another light disk and cut fringe on it only on one side and the opposite side. This is the head of an owl. Glue the blank eyes and beak onto it, based on the photo hint.

To make the owl further, take 5 light disks.

To save energy, do not completely decorate their edges with fringe; do it only where necessary. The photo shows this moment.

Start gluing them together as follows.

Cut out two wings from a dark disk, decorate them with fringe and glue them, eyebrows, and paws of the bird into place.

Place the pencil on the foil and wrap it in this shiny sheet.

Glue pre-cut leaves from disks to the perch. You have such a wonderful owl that will certainly bring good luck to your home.

Coasters for cups made from CDs

These kitchen utensils will prevent the tablecloth from getting dirty with drops of tea and will decorate the table. They are made extremely simply.

Take:

disks;
textile;
ballpoint pen;
padding polyester;
needle and thread.

For one stand, cut two blanks from fabric and one from padding polyester. Don't forget to leave allowances for the hems.

Now place the padding polyester on the wrong side of the fabric and sew the two layers together using a basting stitch. Place the padding polyester on the SD, tighten the thread, tie two knots. Place another circle of padding polyester and fabric on top of the disk, sew the blanks together as shown in the photo. You can put a loop on the side to hang your DIY cup stand from.

Interesting country ideas from old CDs

You can read how to make such a peacock from a tire in the corresponding article, and its tail is made from the material that this review is devoted to. For it you will need to cut metal mesh in the shape of a large fan, attach disks to it with wire in rows or by laying out a pattern for the tail from them.

But others country ideas. To create one of these brilliant fish, you will only need two CDs, as well as colored cardboard. If these figures will not hang under a canopy, then it is better to use rubber or other synthetic sheets instead. From these you will cut out the fin, tail and mouth of the fish.

Place these parts between two disks and glue them together. Don’t forget to first put a fishing line or thin cord inside to hang the craft.

It’s also not difficult to create a funny caterpillar by first painting 5 disks, attaching legs to four, and gluing eyes, mouth, nose and hair from threads to the fifth. You can easily attach the caterpillar itself to a chain-link mesh or to a picket fence using wire.

You can also make something like this from disks for your dacha windmill or street lamps.

Choose your favorite idea and bring it to life. If you want to see how to make these and other things from old disks, we suggest watching the videos:

Bags were made from floppy disks, they were placed as coasters under cups, the metal cores of magnetic disks were turned into parts for the administrator's tambourine, and the magnetic disks themselves were used instead of light filters to look at the sun. What happened to me when art and geekiness met in my head is written in this post.

I love to draw. I have a great variety of markers, pens and pencils, and at some point I realized that ordinary stands and pencil cases, of which there are many in office supply stores, would not be enough for me. I wanted something of my own and tailored to my needs. It all started when I read a post on life hacker about a pen stand made from floppy disks. It is done very simply - take five floppy disks and interlock with rings to each other. I improved the scheme and did not interlock them, but glued them together. The stand made using this method was later modified by adding a lid with tape to the eraser box.

One stand was not enough, so I made another one, replacing the bottom floppy disk with a CD, this increased stability, and this thing looks good. Later, I made another stand using the old method and glued it to the new one, additionally adding several partitions from the same floppy disks inside. For two years now she has been faithfully serving me on the table.

But this was not enough, and then I began to make more stands. Another CD was added to the CD, thickening the bottom, making it look nice underneath and further improving stability. A piece of paper was placed between the disks to prevent anything from falling out in the center of the “pancake.” To connect the stands to each other, part of the disk was sawed off on both sides. Then I began to immediately file off the corner of the disk and not use extra floppy disks to connect the two stands, and made them immediately interlocked, the wall between the boxes was shared by two. The partitions were designed for different markers, from thick to thin. This is the train that now sits on my desk.

But there were more and more pens and I wanted to make even more convenient stand. Having taken out a specially purchased box of floppy disks, I decided to make a stand standing at an angle. The technique was the same as the very first time - a box with a bottom made of floppy disk or cardboard (for original look), separators made of floppy disks, but two more disks were attached to the side, which hold the stand at an angle. The first time I used small self-tapping screws, but even with them I had trouble, the second time I glued them. The stands turned out to be

incredibly convenient and take pride of place near the laptop.

At an angle, the ink deteriorates less and it is more convenient to take out drawing sticks, and the color or thickness is immediately visible.

Now I’m thinking about where to use the old CDs and DVDs, of which I have accumulated a great many. Why not make that same tambourine?

But there were more and more handles and I wanted to make an even more convenient stand. Having taken out a specially purchased box of floppy disks, I decided to make a stand standing at an angle. The technique was the same as the very first time - a box with a bottom made of floppy disk or cardboard (for the original look), separators made of floppy disks, but two more disks were attached to the side, which hold the stand at an angle. The first time I used small self-tapping screws, but even with them I had trouble, the second time I glued them. The stands turned out to be incredibly comfortable and take pride of place near the laptop.

At an angle, the ink deteriorates less and it is more convenient to take out drawing sticks, and the color or thickness is immediately visible.

Now I’m thinking about where to use the old CDs and DVDs, of which I have accumulated a great many. Why not make that same tambourine?

Ana Buigues from Spain found a rather interesting use for old floppy disks.

She makes notepads from old floppy disks and sells them in an online store for $5 and $7 depending on the number of pages.

It looks pretty nice.

Like this original idea for a homemade notepad.
Another use for old floppy disks is a bag! Such a bag does not seem too convenient, but design, as they say, requires sacrifice.

There were old floppy disks lying in a drawer; I had been meaning to throw them away for a long time, but it was a pity. And so on Sunday evening there was nothing to do and I decided to make some kind of craft from floppy disks.

Having searched in search engines for what kind of crafts can be made from floppy disks, I found only one acceptable option for crafts from floppy disks, which can have practical use- This is a stand for pens or pencils.

For this craft you only need six floppy disks and quick-drying glue. There is no need to cut floppy disks in this craft. Using glue, we glue together five floppy disks into a cube without one wall. The sides of the floppy disks with the stickers should be inside the cube, and the metal moving parts should be directed towards the side of the cube that does not have a wall, although this is optional. We glue the sixth floppy disk as a separator inside the cube. This creates a box of floppy disks with two compartments, which can be used to store pens, pencils and other office supplies.

The manufacturing process is in the photo below (you can click to enlarge)