No matter how good the wallpaper looks in a roll, its place is in the decoration of the room, so you still have to learn how to glue vinyl wallpaper on a non-woven backing.

But don’t be afraid – working with this wallpaper is very simple. Despite the relatively high cost, these wallpapers are not only in stable demand, but are also rapidly gaining popularity.

There are many explanations for this - among them is the “novelty effect” - the material appeared on the market relatively recently, but there are also objective factors - the quality of the coating is quite consistent with the price.

Formally, this wallpaper consists not of two, but of three layers - the non-woven base carries two layers - opaque, designed to hide the color unevenness of the walls, and decorative vinyl ().

A huge variety of textures (including those imitating other materials) and patterns of such wallpapers allows you to implement quite bold design solutions.

One of the main advantages of using a non-woven base is considered to be ease of gluing. Although from a practical point of view, wallpaper has many other advantages:

• density and elasticity - allows the wallpaper to hide defects in the wall topography, even small cracks;
• tensile strength;
• resistance to abrasion and fading;
• durability;
• do not create problems during maintenance - both dry and wet cleaning are acceptable;
• high level of noise absorption;
• no deformation - wallpaper does not tend to stretch or shrink when exposed to moisture.

They are most often sold in meter lengths - in this article.

Does this finish have any disadvantages? The main negative point is associated with the likelihood of obtaining a vapor-tight, and sometimes emitting harmful substances surface of the walls.

However, this is the only drawback vinyl wallpaper can be practically reduced to nothing, not forgetting to regularly ventilate the room.

Preparation of materials and tools

So, a very pleasant stage - the selection and purchase of wallpaper is completed. What else is needed to realize the idea of ​​decorating a room?

Firstly, you will need special glue. It is desirable that it be specifically for non-woven-based coatings (Premium Non-woven, Special Non-woven).

And secondly, you should make sure that you have at hand at the right time:

• paint roller and flat brush (several brushes are possible) different sizes) – for applying glue;
• rubber roller and wallpaper spatula - for smoothing wallpaper;
• a bucket of at least 10 liters - for preparing the adhesive solution;
• scissors and construction knife;
• plumb line;
• several soft rags and sponges.

If the wallpaper has a regular pattern and there is a need to combine adjacent layers, then you can use a table of a suitable size for cutting, or you can cut and fit the wallpaper directly on the floor, of course, if you are confident in its cleanliness.

Pasting a room - main steps

And now it’s time to see in practice how easy it is to glue non-woven wallpaper (compared to paper, for example). Having decided to do it yourself, you should follow the algorithm:

Step 1 – preparing walls for pasting

Not the “cleanest”, but simple stage, including simple steps:

• , plaster and wallpaper. Additional tools and supplies may be needed: drill, hammer, special liquids for removing wallpaper;
• removing wall switches and sockets;
• primer. Performs many tasks: leveling and lightening the color of the wall, giving strength to the putty (if it was applied), antifungal treatment walls. For non-woven wallpaper, you can use their “native” glue as a primer by preparing a solution of weak consistency.

Leveling the cleaned surface. Non-woven wallpaper can smooth out unevenness, but if there is a serious height difference of more than 1 cm,... If there are few irregularities, you can choose a more expensive and easy-to-use polymer putty;

Step 2 – marking the walls and cutting the wallpaper

You will need to mark the walls in any case, but it is not always necessary to cut the wallpaper in advance:

• marking on the wall of the starting point. Start pasting from the edge of the window opening, this is where you should draw a vertical line using a plumb line;
• cutting wallpaper. To do this, the height of the walls is measured, and a 10 cm margin is added to the resulting value. This is exactly the length that each cut piece of wallpaper should be;
• combination of drawings. If the details of the design need to be combined, then you first need to cut a piece from one roll, and then select a “pair” for it from another. This will avoid unnecessary waste of material.

Good news for those who have purchased wallpaper of a chaotic texture, without an ordered pattern: they can do without preliminary cutting at all, gluing the wallpaper directly from a roll - the strength and elasticity of this type of wallpaper create the conditions for this method of pasting. A small overlap is made on the ceiling, which is later cut off with a knife, and the wallpaper from below is cut to fit the baseboard or along it.

Step 3 - creating the finishing coat

Direct work with wallpaper and glue:

• preparation of adhesive composition. Purchased ready mix diluted with water according to instructions. An important point - if you can’t exactly maintain the proportions, or you don’t want to, it is preferable to make the solution thicker, i.e. add more powder, this will only improve the adhesive properties;
• applying glue. The non-woven base of the wallpaper allows you to make this stage as simple as possible - the glue is simply applied with a roller to the wall, there is no need to cover the wallpaper with it;
• gluing the first sheet. Regardless of whether the wallpaper is pasted in a separate piece or directly from a roll, you need to align the vertical edge of the wallpaper with the starting marking line. You should start gluing from top to bottom; it is convenient to work with an assistant who will support the heavy canvas. Smooth with a roller or spatula from the center to the edge of the canvas, squeezing out air and excess glue, this will allow you to get a bubble-free wall;
• combining and gluing the second and subsequent sheets. All sheets after the first one are glued end-to-end to the previous one (during approximate overlap, a gap of up to 1 mm is possible, which will disappear when smoothed); overlap is not needed here. The joints are smoothed with a roller; it is better to remove excess glue as quickly as possible using a damp cloth or sponge.

In the process of applying glue, it is important not to rush, not to save the solution and to cover with it only the area of ​​the wall where the wallpaper will be pasted right now. If you didn’t succeed in pasting it evenly the first time, then the wallpaper can be removed and placed again without deteriorating the quality of the resulting coating.

As you can see, gluing this wallpaper correctly is not at all difficult. However, in any room, in addition to smooth walls, there are such “obstacles” as corners, baseboards, radiators and electrical sockets.

You can use a small brush to coat hard-to-reach places with glue.

It’s better to start gluing wallpaper in the corners after having acquired at least some experience, and if you don’t have it, then at least read the following recommendations carefully:

1. If the walls in the room are fairly even, and the corner is located in such a way that it attracts attention, then the canvases are placed without overlapping. To do this, the piece of wallpaper that is pasted first is turned around the corner with a margin of 2 cm. The next one is simply combined with it, joint to joint.
2. If the walls and corners do not allow the wallpaper to lie perfectly, you can glue the first layer in the same way as option 1. Since the corner is uneven, the overlap will be different. Where it is narrowest, you should step back from the edge of the wallpaper towards the corner by 1 cm. From this point, measure away from the corner an amount equal to the width of the roll. Here, draw a vertical line along the level; it will be the edge of the next layer of wallpaper. This creates an overlap of approximately 1 cm.
3. You can glue wallpaper in the corners using such a common and quite effective method like double cutting (cutting) a corner. To do this, the strips adjacent to the corner are glued alternately with a large overlap - up to 5 cm. The wallpaper is carefully “imprinted” into the corner. Then use a rigid profile (ruler or strip) located in the center of the corner to cut the wallpaper along the line. After trimming, the excess is removed, and the edges of the wallpaper are smeared with glue and smoothed with a rubber roller.

But what about sockets? It is advisable to turn them off (as well as switches) during pasting and remove them along with the boxes.

Their locations should be marked with a cross, cuts should be made along the same lines and the resulting corners should be folded inward. The boxes can be returned to their places as soon as the glue has dried.

The wallpapering technology can be summarized graphically as follows:

And the wealth of textured and color solutions allows you to independently create a unique and integral room design, where the design of the walls will be harmoniously combined with both the finishing of the floor and ceiling, and with interior details.

The question of how to glue non-woven wallpaper worries many who have chosen this practical and high-quality material. Its main feature is its thickened structure, thanks to which it is possible to successfully hide minor defects walls The non-woven coating is wear-resistant, moisture-resistant, light-resistant, does not require maintenance and has an original relief surface. If you want to change the interior design, this coating can be repeatedly painted with dispersion or acrylic dyes. The process of pasting walls is simple and does not take much time; you just need to familiarize yourself with some secrets of working with wallpaper.

Gluing non-woven wallpaper with your own hands has some features. To know how to properly glue non-woven wallpaper, we recommend that you familiarize yourself with the following recommendations to avoid mistakes during work:

• Before starting work, be sure to read the manufacturer’s instructions included with the rolls and packaging glue mixture;
• Before gluing the canvas, prepare the surface of the walls. You should start gluing only after completely dry primers;
• pay close attention to gluing the first blank - the quality of the entire work directly depends on this;
• The pasted sheet should be leveled using a rubber spatula (if the surface of the wallpaper is smooth) or a wallpaper roller (if the canvas has a textured surface);
• Each subsequent sheet must be glued without overlap - strictly end-to-end.
  If this is impossible to do, for example, when gluing the canvas in the corners, use the double-cut method: placing two sheets on top of each other by 5-6 cm, you need to make an even cut with a stationery knife at the point of their connection, then carefully removing the excess. This way the angles will be perfect;
• the joints of the sheets (especially the corners) should be carefully ironed with a spatula or roller, removing excess glue to the side free from the wallpaper;
• To remove excess glue, use a damp sponge, carefully wipe the seams in the corners, do not worry about the condition of the canvas - moisture will not damage it.

Preparing and marking the walls is an important point that should be given Special attention before gluing non-woven wallpaper. You should also cut the sheets correctly and choose the appropriate composition for gluing them.

Preparatory work

Non-woven wallpaper can be used to cover any surface. If you plan to paint wallpaper in the future, you should take care in advance that the walls have a uniform color, not very different from the color of the chosen paint, since non-woven fabric is thin material and the color of the base may later be noticeable.

VIDEO:

The walls should first be cleaned (remove the old coating) and any existing defects should be eliminated. Then you need to carefully treat the surface with a primer, it is better to apply a primer deep penetration– this will increase the adhesive ability of the glue. After the primer has completely dried, you can proceed to marking the walls. Pasting meter wallpaper It is recommended to start from the corner - use a level to draw vertical lines on the walls, at a distance of 1 m from each other, this will avoid unevenness and defects in the work.

The next step is preparing the canvas. If you choose a plain material, there will be no problems with cutting. If you plan to glue a canvas with a pattern, make sure that it matches; to do this, you will have to periodically move the next sheet down or up. When cutting, be sure to leave a height margin of 5-7 cm - an allowance for the ceiling; cut off the excess part with a stationery knife after it has completely dried.

Sheets must be cut on a clean surface with the roll face down. Having measured desired length blank (taking into account the margin), you should make a notch, bend the sheet evenly (make sure that the edges of the bottom part of the sheet coincide with the edges of the bent part) and cut it along the fold line. The next piece must be rolled out in the same way and before cutting, check the fit of the pattern. Further work is performed in a similar sequence.

After preparing the walls and canvas, you can begin to solve the next question - how to properly glue non-woven wallpaper? An important point is the choice of suitable glue, the quality of the final work depends on this.

Choosing glue

To paste walls with non-woven wallpaper, you should use a certain adhesive composition, which can be purchased at a specialized store selling construction and finishing materials.

Before preparing the adhesive mixture, carefully read the instructions for the gluing process that come with the wallpaper - some manufacturers recommend applying glue not only to the walls, but also to the canvas itself.

Has a number of advantages:

• does not contain toxic substances and is absolutely safe for human health;
• has excellent adhesive properties, allowing the mixture to be applied to any surface;
• easy to use;
• does not leave stains;
• has a long shelf life in a closed container (up to 10 days).

The process of making the adhesive mixture itself is not complicated - the powder should be diluted in the amount of water specified in the instructions, constantly stirring until the mass thickens.

How to properly glue meter-long non-woven wallpaper

Gluing non-woven wallpaper with your own hands is not a labor-intensive process, but if you choose a meter-long canvas, you should take into account several nuances. Many people prefer meter rolls, since this greatly simplifies the gluing process, there are fewer joints and less material consumption.

VIDEO:

How to properly glue non-woven wallpaper 1 meter wide? Let's look at the basic rules:

1. The main task is careful preparation walls - their surface should be flat and smooth. The walls should be pre-treated with putty and primer - this will level the walls and improve the ability of the adhesive mixture to bond to their surface.
2. If you cut meter-long wallpaper incorrectly, you can often encounter a lack of length last sheet. To avoid this situation and save material, before gluing the sheets, we recommend pre-gluing ceiling plinth to a clean wall, avoiding the need to set aside allowances (if such finishing is planned in advance).
3. If you are sure that the ceilings are even, it is enough to leave a 2-3 cm headroom when cutting sheets. If the ceilings are uneven, you should leave more margin - up to 10 cm.
4. You should not start gluing meter-long ones strictly from the corner; draw an approximate line in advance, stepping back slightly from the edge of the wall - this will avoid distortion of the picture if the corners of the room are uneven.
5. Smoothing the sheet glued to the wall should begin from the top, gradually moving towards the center and leveling the edges of the sheet.
6. The edges of each subsequent sheet should be applied as close as possible to the adjacent canvas, matching the seams and monitoring the pattern if you have chosen a non-solid color coating.

Before you start work, be sure to study all the recommendations and prepare necessary materials- This will greatly facilitate and speed up the process.

How to properly glue wallpaper in hard-to-reach places

The question is how to properly hang non-woven wallpaper in hard to reach places, especially in corners, is important. Difficult places also include areas with sockets, switches and near batteries. When sticking the canvas near sockets and switches, you should first turn off the power and unscrew the protective boxes. Carefully coat the wall with glue, attach the sheet and only after the glue has dried, make a cut required size, remove excess wallpaper and screw the boxes into place. When gluing the sheet near the batteries, carefully process the edges of the sheet adhesive composition. Corners require special attention. There are two options for successfully wallpapering corners:

A. If you have chosen a plain canvas, you need to paste it, starting from the corner, then glue the next sheet on the adjacent wall, grabbing part of the glued canvas, and then cut both canvases evenly with a stationery knife, removing the excess.

B. If you prefer a canvas with a pattern, the sheet is also glued from the corner, and the overlap with the next canvas should be 2-3 cm - this will hide the defect in case of an uneven corner.

The popularity of non-woven wallpaper is difficult to overestimate. This is exactly the case when the abundance of advantages successfully extinguishes one small drawback– high cost.

Well, “wall-mounted” non-woven fabric really has a lot of advantages - freedom design solutions, environmental friendliness, practicality.

But it’s more convenient to evaluate all these positive aspects when the wallpaper has already decorated the room. And for this it will be useful to know how to glue them correctly.

It will be easier to motivate yourself to work on wallpapering a room, knowing that as a result of the work done you can count on:

• truly beautiful and unusual finishing coat– regardless of whether the wallpaper is smooth or a combination (for example, embossed and smooth for painting);
• no problems when cleaning and cleaning wallpaper - this also applies to embossed canvases that are more prone to getting dirty;
• durable and hygienic finish - wallpaper is soft but durable, does not deform, allows air to pass through, does not fade, it can even resist fire;
• easy wallpaper removal

The general principle of gluing will not differ significantly depending on whether the wallpaper is completely non-woven or has a top decorative layer - vinyl, paper or textile. The difference will be more in small nuances.

Tools and accessories

There is no need for specific and expensive equipment when pasting a room. At the same time, some useful little things, although not mandatory, can significantly simplify and speed up the finishing process. That is why it is advisable to prepare:

• laser level or regular plumb line - for applying vertical markings;
• roulette;
• pencil;
• construction knife with replaceable blades - for cutting wallpaper;
• a couple of buckets - for clean water and adhesive solution;
• paint roller for applying glue (possibly with a mesh to remove excess);
• soft sponge or cloth;
• a plastic wallpaper spatula with a soft edge for rolling wallpaper (you can also use a roller);
• a narrow metal painting spatula for trimming wallpaper;
• brush for smoothing wallpaper.

A screwdriver for removing sockets, a roller for rolling joints, and a small brush for caulking corners can also come in handy.

Preparatory actions

Separating these measures into a separate stage sometimes helps to save time by reducing the actual pasting to uniform actions.

Preparing the walls– a rather boring, sometimes not very clean, but useful procedure that includes:

• Removing old wallpaper, plaster or paint. If necessary, you can use special compounds to facilitate the process;
• Leveling the wall with putty. Non-woven wallpaper can smooth out some unevenness, but it is better to eliminate height differences of more than 1 cm;
• Removing switches and sockets;
• Primer. It’s also better not to neglect it - it will help fix the glue on the wall and kill bacteria and fungi. Now the walls need to be dried according to the instructions for the primer;
• Marking. To do this, one evenly drawn vertical line will be enough - here you should use a plumb line. This line will become a guide when hanging the first piece of wallpaper.

You can start pasting from a window, doorway, or corner.

Preparing wallpaper– this is simple, but may require attention and a clean surface (if there is no large table you can lay the floor plastic film). The sequence of actions here is as follows:

• Measuring the height of walls at several points. Although, if you don’t skimp on inventory, one value for the height of the room will be enough. The “uneconomical” but convenient margin should be at least 10 cm. This value must be added to the resulting height; it is into these pieces that the canvas should be cut. Attention! If the purchased wallpaper does not require joining the pattern, then you can paste it without cutting it in advance, but unwinding the roll during the process.
• Combining the pattern. If there is one, of course. The following measure will help save material: the first piece is cut from one roll, the second is selected from any other. When adjusting the pattern, do not forget that non-woven wallpaper is glued end-to-end.

Glue preparation– it’s quite easy here. You need to purchase specialized glue (specifically for non-woven fabrics) and do not ignore the manufacturer’s instructions, no matter how much you want to do it. It is also possible to use the remains of old glue or dilute fresh glue “by eye”, but with one condition - you need to prepare for the fact that the result of gluing will not live up to expectations.

How to glue - step-by-step algorithm

As a rule, this type of fabric is produced in rolls, the width of which is 1.06 meters.

If only for this reason, before gluing meter-long non-woven wallpaper, it is advisable to get an assistant. It is unlikely that you will be able to level the coating on a wall alone, and even without extensive experience. Next you need:

Step 1. Apply glue to the wall, strictly on the area where you plan to place the first piece of canvas. You can use a wide brush or paint roller. Attention! There is no need to apply glue to the wallpaper!

Step 2. Together with a partner, attach the sheet to the wall, carefully align it along the marking line. Distribute the stock along the length of the piece from above and below. It is more convenient to start gluing from the top, while an assistant can support the canvas (the wallpaper is quite heavy and will try to slide down).

Smooth the strip, moving from top to bottom and from the center to the edges of the wallpaper, this way you will be able to avoid bubbles. For rolling, you can use a smooth roller (if the wallpaper is embossed) or a soft spatula.

When installing the first piece of wallpaper, glue and air can be squeezed out in any direction, but when gluing the second and subsequent parts of the canvas, it is preferable to do it in the direction where there is no wallpaper yet.

Step 3. Trim excess wallpaper at or under skirting boards (ceiling and floor). A metal paint spatula is convenient for this. First, you need to press the wallpaper into a corner with a spatula, then run it with a sharp knife. To achieve a straight edge.

Step 4. Remove excess glue with a soft, damp cloth or sponge. You can get the wallpaper wet, but you shouldn’t rub it too hard. A number of manufacturers claim that the glue may not leave any traces after drying, but in reality glossy spots may appear on the wallpaper.

Step 5. The second and subsequent pieces are glued perfectly end-to-end, and there is no need to worry about shrinkage. When applying a sheet, it is more convenient to first align the pattern vertically, and then move the sheet to the previous one.

It would be a good idea (although not necessary) to use a special roller for rolling the joints.

Step 6. How to properly glue wallpaper in corners? This is perhaps the most common question when decorating walls with your own hands.

First, you need to paste over the corner on one side, making an overlap of 1.5-2 cm. But on the other, you need to adjust the canvas so that the edge of the wallpaper matches.

If the angle is curved, then align the second stripe. Afterwards the corner is cut through, the excess is thrown away, and then the joint is coated with a thin brush with glue and rolled.

What to do when pasting with sockets? Their location can be marked with a diagonal cross on the wallpaper. Cuts should be made along these lines, and the corners should be bent inward or carefully trimmed, taking into account the size of the box or switch.

While the wallpaper is drying (should be indicated in the instructions for the adhesive), drafts and sudden changes temperature, it is better to turn off even the air conditioner during work.

If the wallpaper is intended to be painted, then again you should wait until it dries completely.

In general, gluing non-woven wallpaper to the wall is not difficult. And this, in turn, gives a reason to try to do it yourself. The finishing will certainly come out wonderful, you just need to follow the sequence of actions and be more careful.

Tsugunov Anton Valerievich

Reading time: 5 minutes

Non-woven wallpaper is becoming more and more popular and is gradually replacing its paper counterparts. This is due to the presence of a number positive properties: resistance to deformation, durability, the ability to hide minor defects in the base, the possibility of subsequent painting. How home handyman, and a professional finisher needs to know how to properly glue non-woven wallpaper.

Features of gluing non-woven wallpaper

At the heart of this finishing material non-woven fabric is used - non-woven fabric from cellulose fibers.

Before starting work, you need to get acquainted with several important features these wallpapers:

• the canvas does not stretch and retains its original size;
• the width of the rolls is often 700–1400 mm, so finishing a room will require fewer strips than when using wallpaper of a standard half-meter width;
• non-woven fabrics are glued end-to-end, without overlaps. An exception is gluing the corners (but more often craftsmen make the joint with a double cut);
• The glue is spread only on the walls or ceiling; the canvases themselves are applied dry.

Gluing non-woven wallpaper with your own hands is easier than paper-based wallpaper.

Tools and materials for work

Necessary equipment and materials include:

• roller for applying glue (preferably with long pile);
• brush or brush for treating corners and hard-to-reach places;
• a bucket for diluting glue;
• tape measure 5–8 meters;
• laser level or plumb line (the simplest device can be made independently);
• plastic spatula for smoothing strips;
• sponge for removing excess glue;
• dry rag;
• pencil.

Particular attention should be paid to the preparation of the glue: it should be intended specifically for non-woven wallpaper. Recommended by some store consultants universal composition As a rule, it has much less adhesion to non-woven fabric. If it is used in the future, the canvas may begin to come off.

Preparing the walls

For high-quality wallpapering, the walls must be prepared. Main stages:

• Removing old canvases or paint. About how to remove old finishing with minimal effort, it is written. All methods for removing paint are outlined in. If layer paint coating is very durable, then the surface should be treated with medium-grit sandpaper.
• Plastering is carried out in case of significant unevenness.
• Priming with a deep penetration compound.
• Leveling surfaces with putty.
• Re-priming. Craftsmen recommend applying it to the walls instead of a regular primer. thin layer wallpaper glue.

All stages of preparing walls for wallpapering are described in more detail in. The rules for preparing drywall will be different; step-by-step instructions for drywall can be found.

Before gluing the fabrics onto non-woven fabrics, the surfaces must be completely dry.

Marking

Work begins from any corner of the room. It is allowed to glue the first sheet with an indentation, for example, if the calculation of the number of blanks with a pattern along the entire perimeter of the room showed that it is better to make the finishing joint not in the corner, and the corners themselves are quite even. In any case, you need to glue the first workpiece as evenly as possible: all subsequent work depends on this.

• A distance equal to the width of the wallpaper minus 2 cm is removed from the corner.
• By using laser level or a plumb line, a vertical line is drawn on the wall with a pencil.
• If the wallpaper is light, then do not draw a solid line, but make marks at the top, bottom and in the middle.

They go through the entire room in the same way. Even if there are overlaps somewhere in the corners, these lines will help guide you in the correct gluing, especially if canvases with a pattern are chosen.

Cutting material

The process looks like this:

• A roll of non-woven wallpaper is rolled out and the height of one sheet is measured.

• Using a ruler, draw a cutting line with a pencil. The canvas is folded along it, placing a roll on top, and carefully smoothing it out.
• Next, use a knife or scissors to cut off the first piece.

• Measure the height of the room in different points and taking into account a small margin they cut required amount sheets.

If non-woven wallpaper has a pattern that requires joining, you need to find out the size of the repeat - the height of the repeating image. The length of the cut strip must be a multiple of this number, but must be greater than the height of the room.

• The required height margin will allow you to move each sheet for precise selection of the design. To simplify the work, you can periodically place two sheets of paper together to check the image matches.
• Wallpaper is always cut sequentially on one side of the roll.

At this stage, the main thing is not to make a mistake in the sizes, so that you don’t have to glue the missing pieces.

Technology for gluing non-woven wallpaper on walls

Step-by-step gluing instructions:

• The diluted glue is applied with a roller to the surface between the two lines. You need to capture a width slightly larger than the size of the wallpaper. This will help the joints stick well.
• Use a brush to coat the top, bottom edge and corner, since there is always less glue here.
• The finished sheet of non-woven wallpaper is held by top corners, carefully apply it to the wall and, starting from the top, smooth it with a plastic spatula, but there is no need for strong pressure. Particular attention is paid to exact compliance with previously made vertical marks on the wall.

If the wallpaper has a deep texture, it is better to use a wallpaper roller to avoid damaging it.

• Remaining air and excess glue are removed with a spatula from the middle to the sides.
• Exposed glue should be immediately removed with a damp sponge or rag, and then wipe these areas with a dry cloth.
• The second sheet is glued butt to the first.

Do not be afraid that gaps will appear at the joints: non-woven wallpaper does not change its size after drying.

Glue the remaining sheets in the same way.

It is necessary to ensure that the glue on the wall does not dry out, especially in the places where the edges of the blanks are glued, otherwise the canvas may come off.

For this reason, it is advisable to work quickly with non-woven wallpaper. When it is clear that little glue has been applied, it is better to immediately coat this area by bending the sheet.

Trimming the tails

It is more convenient to trim the wallpaper when it is already dry. The technique for even pruning is as follows:

• a wide metal spatula is held almost vertically and pressed against the top or bottom of the wall;
• the knife is held strictly parallel to the spatula, without tearing it off; only the spatula moves.

Nuances of pasting corners

If the wall joints in the room are perfectly straight, you can glue non-woven wallpaper onto the adjacent surface. But this rarely happens. More often, the double cut technique is used in corners:

• The sheet is glued with an overlap (2–5 cm is enough).
• A metal spatula is applied to the junction of the workpieces.
• Use a utility knife to cut through both sheets.
• After this, the cut off top strip is removed. The joint will be smooth and almost invisible.

It is important to not press too hard with the knife so as not to cut the putty on the wall, which may crumble, but not too lightly, otherwise only the top sheet will be cut through.

There are two types of non-woven wallpaper on sale: with a pattern and plain (suitable for painting). If you choose a single-color option, you can repaint the walls 8-12 times in the future, which opens up incredible opportunities for regular renovation updates.

There is a peculiarity of gluing non-woven wallpaper that has helped out many inexperienced wallpaperers: such wallpaper perfectly hides minor defects on the walls, if suddenly some unevenness or cracks remain after all the leveling and sanding. It is thanks to this feature that gluing non-woven wallpaper is very easy and you can do it yourself without any problems, even without experience.

To purchase sufficient quantity material, first make accurate calculations: measure the height and length separately for each wall. Do not forget when calculating the number of rolls that you need to add 10-30 centimeters of reserve to the resulting height of the room (than larger picture, the greater the increase). Before making a purchase, check that all the rolls are from the same batch (the number is indicated on the package), so as not to find wallpaper at home of a different shade or even with different patterns.

Preparing the room for gluing non-woven wallpaper.

Before gluing non-woven wallpaper with your own hands, start by leveling the walls (be especially careful in preparation if you purchased wide wallpaper- the accuracy of the joints depends on your diligence during the preparatory work).

Turn off the power to all sockets and switches and unscrew them, insulate the wires so that moisture does not penetrate them during operation.

If possible, remove the baseboard.

List of necessary tools.

Don’t skimp when purchasing tools for gluing non-woven wallpaper: a regular knife or scissors can dent or tear your new wallpaper; an old scratched spatula will not allow you to achieve it perfectly. flat surface walls when leveling and so on.

So, gluing non-woven wallpaper with your own hands requires the following items:

• measuring tape, pencil;
• level and plumb;
• glue for non-woven base, glue container and roller;
• polyethylene;
• soft brush, plastic spatula;
• roller for rolling edges.

The first step is to start marking the walls. Start from the corner (here the wallpaper will be glued overlapping). Measure one meter from the corner in both directions and draw vertical lines at this distance. From these lines, measure the width of your wallpaper and draw the following lines (they will indicate the joint). Continue marking all walls.

Cover the floor with polyethylene and lay out wallpaper front side down. Measure the required length of the piece and fold the roll to make an even fold, cut the wallpaper with a knife.

You can cut one piece at a time and glue it, or immediately prepare wallpaper for the entire room and roll it into not too tight rolls with the pattern (or color) inward.

Prepare special glue and start applying it to the wall under the first cut. The rule for gluing non-woven wallpaper is very simple: start gluing from the ceiling and level it down, from the middle to the edge, using a brush (roller).

Once the second piece is glued, use a seam roller.

Cut off the remaining stock of wallpaper from the bottom when the glue has dried (do not forget that the wallpaper should be left with the expectation that it will be slightly pressed against the wall by the baseboard).

When preparing to wallpaper, pay special attention to the corners of the room. If you use plastic corners, which are attached to wet putty, the result will be as neat as possible.

Coat the corner with glue especially carefully, place the panels overlapping (preferably no more than three centimeters).

How to hang non-woven wallpaper on the ceiling.

First of all, prepare the surface: the ceiling should be clean and dry. It's good if you prime it before pasting.

Gluing non-woven wallpaper to the ceiling will not bring any unpleasant surprises: it will mask defects, will not stretch, will lie flat and without bubbles.

The technique for properly gluing to the ceiling is extremely simple. There is no need to adjust the fabric to the joint: they should be placed overlapping, and the excess edge should be cut off along the edge of the previous piece. This way you can achieve a ceiling without seams.

Additional Information.

Before hanging non-woven wallpaper, watch the video. A good example will help you do everything correctly yourself without bubbles and without seams - just follow the instructions of the master from the video of gluing walls with non-woven wallpaper.