Customer Service. Check out 24 hours a day.

Our company repairs, adjusts, cleans and diagnoses diesel and gas burners. The following manufacturers; burnersLambordgini, Cuenod burners, Gierch burners, Roca burners, Weishaupt burners, Riello burners, Ferroli burners, Bentone burners, Ecoflam burners, Fbr burners, ACV burners, Hansa burners, CTC boilerand other manufacturers. You can get advice and call a specialist by calling us.

Gas burners are one of the main parts of fuel boilers. They are used to burn fuel directly, and their failure has a very detrimental effect on the heating process. Or rather, it disables the entire system. A timely service inspection of the device would help avoid this, but it is not available to everyone. And in this case, the repairs offered by our company will come in handy. gas burners.

What can cause the failure of one of the most important parts of a fuel boiler? There may be several reasons, and the most common is irregular technical inspection. Failure to identify problems in a timely manner entails the need for repairs. diesel burners. In addition, this causes a violation of the optimal operating mode of the device, a decrease in efficiency and an increase in thermal loads.

Of course, many owners of fuel boilers would like to avoid such consequences, which means that regular technical inspections become really necessary. Without it, it will be difficult to imagine the trouble-free functioning of the main element of the fuel boiler, but with it it will no longer be inevitable urgent repairs burners

But this is far from the only reason for equipment failure, which is sometimes difficult to understand without a specialist. The cause of the breakdown may also be incorrect use of the fuel boiler, which completely crosses out all operating rules. Careless use of the device will inevitably lead to the need to replace any parts and repair gas burners.

And do not forget that contamination of fuel boiler parts can also cause an early breakdown. Again, timely service maintenance, which will include cleaning. But many people don’t take this into account and hardly know how to avoid a breakdown, hoping that it will simply bypass it. Then repair work will be inevitable, and it is better to carry it out in a company that knows its business.

Burner repair by professionals

Service	Price
Visit of a specialist for diagnostics inflatable burner up to 90 kW.	1500 rub.
Cleaning the boiler with a diesel burner	from 5000 rub.
Diagnostics of automation and adjustment of one circuit	1500 rub.
Setting up a gas inflatable burner up to 90 kW. With a gas analyzer.	6000 rub.
Setting up a diesel inflatable burner up to 90 kW. With a gas analyzer.	6000 rub.
Repair of inflatable (gas, diesel) burners up to 90 kW. No spare parts for the burner.	4500 rub.
Gas setting modulating burner (Weishaupt type)	11000 rub.
Work performed at night increases

In our company you can order an employee to visit the site of the breakdown. And we will give you confidence that all work will be carried out by specialists and not by amateurs. Our masters have many years of experience, and therefore they repair diesel burners not only within an acceptable time frame, but also in such a way that you do not have to turn to professionals for help too often.

But someone might think that it would be easier to buy new equipment rather than carry out repair work. But in reality it will be more difficult and costly. To purchase this or that equipment, you need to find exactly the model you need. And such searches can take a decent amount of time. So why waste it practically in vain?..

And if a model similar to the previous one cannot be found, then someone decides to offer to buy completely different equipment. But you will need to get used to using a new fuel boiler, which will also take time. So why break the usual routine when, instead, you can repair failed gas burners through specialists?..

It will be more a good decision, which will save you a lot of time. In addition, this way you will significantly reduce your costs. Yes, since a malfunction has already been discovered, it will be easier to fix it. But replacing the entire equipment is worth it big money, and in comparison with this, repairing burners will be a very cheap pleasure.

One way or another, the work of specialists, as a result of which your fuel boiler will return to operation, will be justified. And modern equipment and labor experienced craftsmen will convince you that the problem was not as global and terrible as it initially seemed. And everything to avoid a recurrence of such a situation in the future is a timely service inspection and correct operation fuel boiler and burners. This will save you from unnecessary worries and costs. And our specialists, who carry out any work around the clock necessary work with fuel boilers will help you achieve the best and regular performance of your equipment.

Our specialists will help you select, install, configure and launch high-quality equipment that in the future will not cause a lot of hassle and problems with setup and repair. We work with boilers and burners Baxi, Vaillant, Viessman, Protherm, Buderus, DiDietrish, Ferolli, ACV, Weishaupt, Gierch, Hansa, Lamborghini, Oilon, Cuenod, Fbr, Ecoflam, etc.

Repair gas stove DIY is prohibited by Russian law. True, criminal liability is not yet provided for; if an accident occurs, troubles are expected. In the hero city of Volgograd, one smart guy started a vent water heater combustion products. 4 people died. The authorities classified the case based on the article causing death by negligence. Gas service technicians have the right to replace equipment and perform service work. This is relevant, starting with connections and ending with switching to a different type of fuel. Below are a couple of recommendations, not a user manual, just general techniques.

Installation of a gas stove with electric ignition

Darina, Hansa, Ardo – so different and at the same time the same. The repair of gas stoves by Hephaestus is exactly like the repair of Ariston; gas stoves are made up of standard units. It is enough to look at a single device to understand the circuit. Have a reference book to help you properly maintain gas pressure. When set correctly, the flame is even and blue. Orange flashes indicate an imbalance in the fuel mixture. If the settings are incorrect, the flame will fail (especially typical for carob ovens).

Those who have read the reviews of the VashTekhnik portal regarding gas instantaneous water heaters, do-it-yourself repair gas stoves will seem like child's play! You cannot do it yourself, but you can clean the device. The technician will have to clean candles, combustion sensors, burners, and sometimes nozzles. There are a lot of interesting things inside the gas stove. To the master proper cleaning equipment, you should understand what you will see inside. Under the gas stove table:

• Burners. They are often bolted to the gas stove table. Each burner consists of a lid, a divider, and an injector (nozzle). They are not rigidly attached under the table; each one is fitted with a steel or copper tube, fastening is carried out like an American one. You will need a key of approximately 13 to remove the products. It is more convenient to clean if something is clogged inside. Beware of tearing off the head or thread - you will have to replace it. After assembly, check the tightness by washing. The procedure involves applying foam to the disputed nodes.
• There are two candles around the perimeter of the burner. One serves as ignition (due to a piezoelectric element or an electronic circuit), the second is a thermocouple, included in the combustion control circuit. It's quite easy to distinguish. The high-voltage spark plug is covered with a ceramic caftan so that the spark does not strike below a predetermined level. When the arc flows, you can see: the tongue of the discharge licks the body of the burner. Gas stoves with electric ignition will be properly grounded by a technician. Beware of using plumbing connections or connectors pierced with metal threads. During installation, the hoses are separated from the riser by special gaskets. Failure to follow the rule will easily provoke an explosion in favorable situations. We wrote in more detail, we remind you again. The candle with a thermocouple is covered with a bronze caftan that conducts heat. The faster the semiconductors cool down, the flame goes out, and the protection that cuts off the gas supply will work more reliably.

• Most often there is a collector under the table. A thick tube from which a line goes to any burner. The gas flow is controlled by solenoid valves. The number is usually equal to the number of burners. When the burner flame goes out, the rest will burn. The expediency of the decision can be challenged, but this is how it is done. Each solenoid valve contains an inductor. The thermocouple heats up, an EMF (tens of millivolts) appears, keeping the devices open. Full order turning on: turn the gas supply regulator, press. We press the piezo ignition button, or the electronic circuit performs a set of procedures independently. We hold the handle for a fixed time. The thermocouple warms up, an EMF begins to be generated, the electromagnetic valve is held open due to the phenomenon discovered by Seebeck. As soon as the gas goes out, the sensor plug cools down and the gas supply stops. The process is inertial, we believe that the day is not far off, flame ionization sensors will begin to be used in gas stoves, allowing the protection to operate instantly.
• Similar to the gas manifold, there is a distribution valve panel inside. Single high-voltage wires run to each ignition electrode. Another way to distinguish a thermocouple: two wires with a thinner cross-section stretch to the sensor. The spark breakdown goes to the housing, the second ignition wire is superfluous. If the gas stove is deprived of grounding, we have a chance of getting an electric shock. Fatalities are possible - an additional reason to entrust the installation to a professional. The collector is connected via connectors. There is protection against incorrect orientation of the plug; you can easily mix up some places. When you open the burner, a spark will jump on another divider. It’s not very pleasant, a flash of flame is possible.

• If a charge is formed electronic circuit, you will find inside a simple thyristor, diode, capacitor, fuses. The circuit operates, powered by a capacitor charge with a subsequent burst of energy from the spark gap of the spark plug. Repair of electric ignition of a gas stove concerns the listed elements. The fault is easy to notice. Burnt elements are black or similar in color.

Setting up a gas stove for a different type of gas

Gas is endowed with two significant characteristics:

1. The calorific value is determined by the composition. The higher the methane content, the lower the parameter. For natural gas, the calorific value is predetermined by the location where the natural resource is extracted.
2. The pressure depends on the type of gas. Liquid requires higher. For the main line, the typical value is 13 mbar. The parameter ensures the correct operation of solenoid valves, injectors, and burners.

When too high blood pressure the gas burns incompletely, soot and orange flames will appear. The system may not operate correctly. I have come across instructions recommending the use of a reducer to obtain 13 mbar from a balloon. There are probably restrictions. It is not without reason that it is recommended to place two cylinders in parallel. Please note that the main gas is actually liquid, supplied through a reducer. It is pumped from tanks into containers from which houses are supplied. Find out the wiring diagram for the house where you live. Occurs natural gas, distributed centrally, having lower cost, pressure, and calorific value. The pressure is assumed to be 13 mbar. This aspect must be taken into account when installing and repairing a gas stove.

The reason to call professionals for installation and configuration is that the specialists know the parameters. Of course, a person with a certificate is also aware of local conditions. Now imagine what will happen if you unknowingly connect the equipment incorrectly! It's a gas, stop joking. This is especially true in the outback, where neighboring houses may have different connection. It is recommended to purchase a set of replacement injectors for different gas pressures. They described the process of boring jets with their own hands and mentioned that the law prohibits rework. The work is unsafe. Before purchasing, ask your gas service for the parameters and ask the store if the equipment is suitable. It’s not too late to start making inquiries during the next cleaning. It's not a fact that everything was done correctly.

How to adjust jets. The size of the central hole changes. Less pressure, the hole becomes larger. Verticality and alignment must be maintained, otherwise gas will leak to the side, which will lead to an accident. It is appropriate to recall that in old Soviet gas stoves the jets are hidden deep inside. The design of the burners is unusual. Between the nozzle and the divider there is a tube with a pair of ears attached to the frame. There is one frame for every two burners. In pairs, the pipes are attached with ears inside the housing. A bowl with a nozzle is placed at the lower end, and a divider is inserted into the upper end. The gas stove operates using a jet stream. Propane-butane is heavier than air.

The peculiarity is that opposite the nozzle there is a tube with a radial cutout. Needed to unscrew the hex nozzle without using a long socket wrench. In modern gas stoves, the jet is located under the flame. A different arrangement improves traction and discourages ordinary people from climbing inside the stove. Repairing a gas stove with your own hands is a dangerous business.

Electric stoves today also look like a more appropriate option for summer residents.

The burner is the most important element any gas boiler, its “heart”, the stability of which directly affects the efficiency of the entire system. A correctly selected, installed and configured gas burner ensures uniform and complete combustion of fuel, and any, even small, malfunction in its operation can lead to serious consequences. Any gas equipment, this is a potential source of danger and if not eliminated in time, for example, “priming” of the burner, this can lead to the accumulation of gas in the room, which can cause poisoning and explosion.

Reasons to contact a specialized service center include increased fuel consumption, increased noise, repeated blocking of the device and the appearance of a gas smell.

A large assortment of burners of domestic, European and Asian production presented at Russian market, allows you to select the unit that optimally meets your requirements and financial capabilities. However, such diversity requires people performing repairs and maintenance to have a thorough knowledge of the design and features of many models. And if a master who does not have special skills and expensive equipment can still cope with removing carbon deposits or cleaning the burner domestic production, then a non-specialist trying to repair high-tech Viessmann or Buderus equipment can, at best, lead to a decrease in the efficiency of the system, at worst, to a serious accident.

Our Center offers professional repair and maintenance services for any models of gas burners: from economical and reliable Baxi, Beretta, Ferroli, Protherm, Dakon to the most modern and expensive Viessmann, Bosch, DeDietrich or Buderus. We are ready to provide both one-time assistance in the event of an accident and take on long-term obligations. We are equally responsible and professional in repairing simple single stage burner, mounted on a household wall-mounted boiler and modulated, responsible for the operation of an industrial cascade installation.

Extensive experience working with various heating equipment showed that the most common reasons calls to the service center include poor-quality installation, non-compliance with the manufacturer’s requirements for operating conditions, natural deposition of combustion products, wear of parts during operation and irregular servicing of gas burners. To avoid downtime and costly repairs, we recommend regular checks and technical inspection of boiler equipment, including the gas burner. This will allow you to identify even the smallest faults in time and prevent them from developing into a serious problem.

By contacting the E-Tech service center, you entrust the “heart” of your boiler to professionals who can quickly and efficiently deal with any problem

Our specialists have at their disposal the most modern equipment and tools for diagnostics and repair work, including high-precision gas analyzers and PCs with the necessary software.

Thanks to our own fleet of service vehicles, the repair team will arrive at the scene of an accident as soon as possible, carrying a set of the most popular spare parts and consumables.

In case of absence necessary details, they will be quickly delivered from our 24-hour warehouse.

If it is impossible to eliminate the cause of the accident at the facility, the equipment will go through the entire cycle of necessary measures at our repair base.

All types of work and materials used are provided with an official guarantee service center E-Tech.

Portable gas burners are very popular both at home and in professional repairs. The scope of their application is very wide, and there are several varieties. You can choose the right burner for your current tasks and learn how to use it correctly by studying this article.

Main types of portable burners

Gas burners in the form of nozzles for cylinders with a collet connection must be considered as a separate class of tools. They are used in high fire safety at sites where heavy equipment does not work construction equipment and the risk of damage to the burner itself is minimal.

First of all, burners are characterized by temperature and flame shape. Most simple devices have a combustion temperature close to the minimum, only 700-1000 °C. Air enters the burner naturally, so it is always in short supply. At the same time, more expensive products have a special shape of air supply channels, due to this the air flow increases and the combustion temperature rises to 1200 °C.

Even hotter flames are produced by ejector-type burners, in which air flows to the hearth due to rarefaction, the flow force is directly proportional to the operating gas pressure. This allows you to raise the temperature to 1500-1600 °C and regulate it relatively smoothly along with the flame length with a simple twist tap. There may be several sources of combustion in the burner; such a tool is not intended for fine work, but it perfectly heats large areas.

The highest combustion temperature for burners is 2000-2400 °C and is achieved through the concentration of injected air in the combustion zone and the use of a special gas: methyl acetylene propadiene (MAPP). A high-temperature cone is formed in the torch flame, comparable in power and temperature to gas-oxygen welding, but not capable of autogenous cutting.

Optionally for all types of burners it is possible to have a flexible or rotary tube, piezo ignition and a highly sensitive control valve. Over a large temperature range there is the same wide choose burners in terms of power and corresponding gas flow.

Tourist burners

Low temperature burners solve a truly wide range of problems and are suitable for household use and professional construction. These blowtorches are most often used to replace electric hair dryers in places where only autonomous operation is possible.

The main disadvantage of burners without an injector is low flame stability, which is especially noticeable during sharp turns and tilts. splashing liquefied gas do not have a significant effect in burners anymore expensive class with a special gearbox and heating circuit.

As a rule, such torches are not used for soldering. Their main purpose is to ignite wood and coals or heat materials that can be used with an open flame. Such a tool is also indispensable for thawing pipes, heating car engines or unpacking tow strips, burning paint to remove it and other rough work.

Supercharged blowtorches

Ejector blowtorches have a more specific device and purpose. These are constant assistants of many designers and craftsmen in the processing of non-ferrous metals. The high temperature and adjustable flame make the torches ideal for soldering and hardening metals or other heat treatments that require high accuracy temperatures and a clearly defined cone.

Due to the specific application, the size of the burners and nozzles may vary greatly. Miniature ones are used for soldering jewelry and thin metal, despite the lack of pure oxygen supply, they can even cope with filigree work. Middle class burners have a cone thickness from 3 to 9 mm and the best way suitable for electrical soldering of connecting wires cable joints, copper and aluminum tubes.

Due to their high power, larger burners can be rationally used in industries such as artistic forging, precision bending or stamping of metal. These are the tools that home craftsmen use as the basis for homemade gas forges and hardening furnaces.

For ejector burners, the concept of an unstable flame is purely figurative, and although periodic flashes of gas are possible, the temperature in the core remains relatively stable. The gas preheating circuit is used more to improve the efficiency of the burners, to reach operating power faster and to accurately regulate the temperature.

High temperature gas burners

We cannot ignore burners that use MAPP gas instead of a propane-butane mixture. The flame combustion temperature in them is 2200-2400 °C, while the main energy is concentrated in a cone, which is quite stable and has a pronounced boundary.

Such burners are used for heating, forging and bending high-carbon steels and massive parts. Heat It also allows for better hardening and tempering of metal.

In terms of soldering and welding, MAPP gas torches do an excellent job of stainless steel, while even thin parts do not overheat. Another advantage of MAPP gas is low temperature boiling, making it possible to use it at temperatures as low as -20 °C even in burners without a heating circuit.

Choosing the best option

Choosing a gas burner for various tasks, you should pay attention to certain nuances. For tourist purposes, the simplest torch burners without pressurization are well suited. Even cheap Chinese products can handle lighting a fire or heating food; you don’t mind breaking or losing them at all.

For household purposes and minor repairs, it is better not to purchase tools from the amateur series. Slightly more expensive semi-professional burners have a more thoughtful design and are devoid of such non-obvious shortcomings as, for example, melting of the plastic lining of the mouthpiece or malfunctioning piezo ignition. Another argument against the average price category is the almost universal absence of a normal control valve, which even for rough work may be important.

If the torch is selected for fine work, soldering or welding, additional attention should be paid to ergonomics and balancing. During such work, the burner has to be turned on and off frequently, so the shape of the body and the placement of the controls should allow ignition and precise adjustment with one hand.

When choosing power, you should be guided by the thickness and material of the parts being processed. A 500-700 W burner will be quite enough for burning paint or soldering copper wires. Tubes made of non-ferrous metals and steel products up to 3 mm thick will warm up well with a flame power of about 1200-1500 W. 2-3 kW burners are used for heating and bending reinforcement up to 14 mm thick. There is one more feature: the flame of powerful high-quality burners can be adjusted for more delicate work, but it will not be possible to heat a massive part with a low-power burner.

A simple burner, there were quite a lot of similar reviews here. I'll try to be concise so as not to overload unnecessary information, just an attempt to complement the earlier reviews and remind you of the product in this category in general.

First with a failed burner. The other has a burner.

I received some kind of unsuccessful burner, noticeably crooked. Perhaps they were bent during shipment, by the way, minus the purchase of the burner in China, the “trunk” is easy to bend, at the attachment point it is very fragile, it would be better to send it disassembled. Maybe it’s worth writing to the sellers about this? Perhaps this was a defective burner from the beginning, since the “trunk” did not bend back in any way, it turned out to be a Z-shaped something that returned to its original position.

The burner worked unstably, there seemed to be a flame, but it didn’t really heat anything. Since this was the first burner, it seemed that it was normal, it was burning and it seemed to work. Such an overgrown lighter.

The valve had no travel limitation! If you confuse the direction of rotation of the gas supply valve and open it further, from open state, it fell out, gas came out of all the cracks (including back), creating a fire hazard. In such a situation, I once threw the burner into a snowdrift. Another time I tore the flaming burner off the cylinder (fortunately it didn’t have time to heat up, but the sluggish yellow flame not scalding if you do everything quickly), then the valve in the cylinder with the burner removed automatically shut off the gas supply. Extra heroism, on the other hand, a torch is a dangerous tool, you need to remember this.

I tried to “repair” the burner, drill out the nozzle (I thought the gas flow would increase), but it got even worse. The flame turned yellow, like from a lighter. Next, I tried to cover the air inlet holes with foil, also without much success, the burner operating mode changed, but it didn’t get any better. By by and large lay idle. It would be better to buy it in a regular one hardware store, this was one of the worst purchases.

A little later on mysku I saw a review of a more successful burner and that it can melt aluminum:

Yes, and there were many reviews of burners, the essence is approximately the same for all, they burn, burn, melt in the same way, nothing new can be invented here, in addition to what was previously published:

I was thinking about buying the same one. Somewhere in the comments there was a link to a normal burner from the cheapest ones. I just need one for occasional short-term work.

I bought it, unpacked it, weighed it, everything as always:

Additional Information

There are also scales in the photo:

Additional Information

Accordingly, the wife took into her many instruments. These instruments have everything that is presented in , in the “neighboring” one, and much more, thermometers, pyrometers, a food printer, etc. When I film the use of the burner in our case, I will update the review.

Examples of application in cooking from other sources, this is a different application technique, but the essence is the same, local heating.

Gas burner for caramelization:

10 reasons to use a cooking torch:

In culinary stores, prices are naturally slightly higher. You can look and, but naturally don’t buy.

It was also useful in practice for thawing the lock on the gate. Without a torch I did it with a hair dryer; with a torch, the lock had already thawed while I was still unwinding the wires for a hair dryer.

In the end, I can say that it is very useful, universal tool. And this particular burner seems attractive in terms of price/quality ratio. On the other hand, it may be easier to buy this type of product at any hardware or construction store; you will still have to buy gas there. The prices are comparable, especially considering the speed and convenience of purchasing in a regular store, and the ability to quickly replace a defective burner under warranty.

I'm planning to buy +19 Add to favorites I liked the review +27 +50