When arranging private houses and their decoration, many owners give preference only to environmentally friendly pure material. The most popular type of wall cladding residential building is the finishing of the facade with boards or other products based on natural wood.

This choice is due not only to environmental friendliness, but physical properties, since a tree always has beautiful view, is resistant to mechanical stress, retains heat and makes it possible to partially replace individual strips in case of damage.

The main characteristics that always play in favor of wood are:

• high strength;
• high thermal insulation;
• soundproofing;
• ease of use;
• combination with other types of materials.

Of course, the price of this natural product is an order of magnitude higher than its artificial counterparts, but if you line the walls with your own hands without the involvement of specialists, and using inexpensive types of wood products, then its cost is completely justified.

The lining can have a convenient fastening, which significantly reduces installation time.

Variety of materials

Today on construction markets presented a huge number various products made of wood or wood-based, but the most popular materials are:

• lining;
• board with imitation timber;
• block house;
• siding panels;
• unedged board.

Lining

Lining is a board for finishing walls, which is often made from solid wood, is characterized by a high degree of strength, speed and ease of installation of the product on a prepared surface.

Note!
This material is easily replaceable if damaged, and allows designers to use various tinting agents, apply different varnishes and paints.
The main advantage of this material is its small specific gravity, which makes it possible to use these finishing boards in any construction conditions.

The lining is mounted on a pre-prepared sheathing; the resulting space can be filled with insulation or communication systems can be laid. The material has different physical properties, is made from various types of wood and can be used for both outdoor and interior decoration.

Board imitating timber

Imitation timber is a board for exterior finishing, which when assembled creates an imitation solid timber and gives the building more solidity. The material also has a high degree of strength, is resistant to mechanical damage and when processed with special protective equipment becomes resistant to destructive environmental factors.

The material for it is similar to lining and installation follows the same principle. Each board has tongue and groove locks on the longitudinal edges, which greatly simplifies the installation process. This finishing board under the timber is installed on wooden sheathing on top of the insulation.

Block house

Block House is another representative of a decorative board, which is designed to imitate a log house made of perfectly smooth rounded logs. The product is available in different thicknesses and widths of the rounded edge, which allows the product to be used both on the outside of the house and for interior decoration.

This board is for exterior finishing At home, it is usually made from pine woods such as spruce or angora pine, which gives the wall more realism and has a natural color. Block Houses can also be made from larch, aspen, cedar or birch while preserving the natural color of the wood and patterns.

For your information!
The material is divided into two types (“A” and “B”) according to the type of external texture.
Group “A” material has a perfectly smooth surface and is suitable for indoor use.
The material of group “B” has a rougher processing, the external relief is close to real timber and is used for outdoor decorations.

Planken

This is a small decorative board designed for decorating small architectural forms and individual areas indoors. It can also be used for external facades, covering individual parts of the building to make them stand out from the overall picture.

Planken is made in the form of a regular board with processed chamfers along the edges of the product. The material itself can have different colors and textures, and the chamfers can also have sharp or rounded shapes.

Among the characteristics of the material, one can note its resistance to moisture, since it is made mainly from larch and is saturated with a large number of natural resins. When installing the plank, a small gap is left between the boards, since under the influence of temperature and moisture, the plank tends to expand.

Wood based siding

Which can be made from various natural and synthetic materials. In this case we're talking about about panels made from wood chips under high pressure.

Products can have different sizes, colors and textures, imitating all kinds of wood. The material has high strength, is intended for outdoor use with the possibility of laying insulation, and is resistant to moisture and sunlight.

When purchasing siding, its standard package usually includes the necessary mounting parts, instructions for installing the panel and additional elements to hide seams and cuts. Siding panels, like any other finishing board for exterior finishing, are installed on a pre-prepared sheathing.

Unedged board

An unedged board is a board with unfinished edges. Wall decoration unedged board gives the building a specific style and with a good design layout, the effect is very beautiful with a pronounced individuality.

Typically, this material is used to make lathing for the installation of another decorative tree, but in Lately They began to use it for cladding facades in country houses.

In most cases, finishing of facades with unedged boards is carried out on non-residential outbuildings, garages or gazebos. When the boards are carefully adjusted to each other, one gets the impression that the entire structure is made of wood, and this effect is often used by landscape designers.

In some cases, finishing with unedged boards is done even without cleaning it from tree bark; this is done solely for the purpose of giving the structure a unique style and a certain aged look. Before use of this product for exterior finishing, it is necessary to pre-treat it with certain means to protect it from moisture and exposure to ultraviolet rays.

Benefits of wood finishing

Finishing building facades with natural wood or materials based on it has a number of significant advantages, such as:

• use in different climatic zones;
• the ability to create structural elements of any complexity;
• environmental purity and naturalness of the material;
• ease of installation, without special skills;
• long service life with the possibility of repair and partial replacement;
• the possibility of installing additional insulating layers on the walls of the building;
• the possibility of a major reconstruction of the facade without causing damage to the base of the building;
• relatively low cost;
• many options for color and texture solutions.

Disadvantages of wood finishing

Like any other type of material, wall decoration with boards also has its disadvantages:

• with a large amount of moisture, a sharp deterioration in the physical qualities of the material is observed;
• without special treatment, wood supports combustion;
• the presence of knots, resin pockets, cracks and other natural components of wood;
• the need for periodic maintenance and renewal of protective or paint layers;
• development of fungus without pre-treatment with antiseptics.

Conclusion

High-quality processing of wood before its direct use will provide the tree with new physical properties and avoid the manifestation of some of its disadvantages listed above. Overall, using this natural material always plays into its favor in decorative terms, successfully combining with other types of materials, creating a feeling of comfort, coziness and giving the house a chic, presentable look.

Be sure to watch the video in this article and learn a lot more interesting things about this topic.

Wall cladding with wood when decorating the interior is considered very stylish option. This is due to the aesthetics and environmental friendliness of the material. Exists a large number of available options for decorating walls with your own hands from wood, which this article will tell you about.

Wood - quite common construction material, which in addition to durability has an attractive appearance.

More budget panels are made from:

• Boards.
• Brusa.
• Classic lining (see Cladding with lining: proper execution of the work).

A wide variety of wood is used to make them.

It can be:

• Pine bars.
• Oak logs.
• Walnut trunks.
• Birch trees.
• Apple trees.
• Some exotic breeds.

Before covering the walls with wood, from a wide variety and sufficient abundance of materials, you can choose those that will satisfy the owner in terms of such indicators as:

• Practicality.
• Ecological cleanliness.
• Easy to care for.
• Ease of installation.
• Small price.
• Compliance, when decorating a room, with the specifically chosen style.

Walls lined with wood allow you to:

• Decorate the interior beautifully and stylishly (see Wall decoration design, interior ideas).
• Ensure moisture exchange process.
• Create a fairly pleasant microclimate in the room.

Each type of wood finishing has its own advantages and some disadvantages.

Tip: Before covering the walls with wood, you need to choose the right material, taking into account many factors, from texture to the shape and size of the panels.

Wall cladding with boards

The construction market offers a wide variety of boards of various types.

They can be:

• Deck.
• Facade.
• Parquet.

The latter type is given the greatest preference by home owners, due to several reasons:

• Ease of manufacture. A variety of tree species are used for its production:

1. from beech, maple, ash, larch;
2. before fruit trees- pears, cherries and cherries.

• A wide variety of shades makes it possible to choose the desired option for any interior. Wood can be purchased light shade or find a material that is dark enough in color.
• All types of wood mentioned are high-quality species, characterized by excellent performance characteristics.
• As a finishing material, parquet boards for walls look great in the interior.
• Affordable price material allows large room apply without too much financial outlay.
• Using special stains and wax impregnations, you can further “decorate” the wood. This will extend the service life of the coating and change the interior for the better.

Proper covering of surfaces with boards made from solid wood will allow you to get a very impressive interior that will be the envy of all your friends. Special impregnations made on the basis of oils and wax will give the boards a look that will resemble velvet, as in the photo.

In addition, such compositions create a film on the surface of the boards that will repel water, which will prevent the appearance of fungus and mold on the material.

Using a block house

This coating is a type finishing board, which can:

• Imitate timber or log.
• Create an effect wooden log house.

It is made by sawing a log using the “square in a circle” scheme, and from the log you can get:

• Flat boards.
• Beam.

And from its outer part - blanks for obtaining a blockhouse (see Finishing an internal block with a house: rules for performing work). This results in waste-free production. Their cross-section imitates a rounded log, allowing you to create a real “rural” interior in the room.

The main advantages of a blockhouse:

• Durability.
• High strength.
• Excellent thermal insulation.
• Excellent sound insulation.
• Easy installation.
• No deformation after a long service life, over thirty years.
• High fire safety rating.
• Impregnation with antiseptics and special fire retardants prevents the material from being damaged by fungi and insects.
• The lowest cost is for a blockhouse - made of spruce or pine, which also releases resin, which increases strength and creates waterproofing.
• When using cedar, indoor maintenance is ensured optimal level moisture and creating a healthy microclimate.
• Products made from larch increase strength and moisture resistance.

Blockhouses can be:

• Wide, up to 230 millimeters.
• Narrow, up to 90 millimeters.

Tip: Interior decoration should be made from narrow elements, which helps reduce space loss after finishing the room.

To make walls decorated with wood look even more impressive, you can perform artificial “aging”. In this case, the most commonly used method is “brushing”, or processing the material with a wire brush.

With this type of wood processing:

• Fibers are removed from the surface, this creates an original relief.
• The material is painted.
• Without allowing the paint to dry, it is removed.

Features of the lining

Most economical way finishing, when using decorative facing boards or lining.

For its manufacture the following can be used:

• Pine.
• Linden.
• Aspen.
• Alder.
• Larch.
• Cedar.

With this decoration, the walls acquire:

• Sufficient durability.
• High strength.
• Resistance to mechanical loads.
• Good sound insulation.

Besides:

• The material is easy to install.

• Has a low cost.
• Lining can be used to update the interior: the walls are painted or tinted several times.

Disadvantages of panels:

• Danger of infection by insects and fungi.
• They do not tolerate moisture and temperature changes well.

Using eurolining

This material is a classic lining with its advantages, the only difference is that the material is manufactured according to European quality standards.

The main difference between the panels is the presence of longitudinal grooves that are designed for ventilation.

This allows:

• Provide protection against condensation.
• Reduce stress in the wood itself.

Eurolining is made with deeper connecting grooves, which significantly reduces the likelihood of cracks forming.

The material has several categories:

• “A” – high, there are no knots on the surface.
• “B” – medium, the presence of knots on the surface is allowed.
• “C” – low, used very rarely for finishing work.

Features of natural wooden wallpaper

Wooden wallpaper is an alternative to finishing walls made of real wood. The basis of the material is rolled paper, which is covered with a special wood veneer, for which valuable species wood, 0.1 - 0.6 millimeters thick.

Features of wooden wallpaper are:

• The ability to install on radius surfaces, which cannot be done with previous types of materials.
• They must be carefully coated with varnish, oil or wax to increase their favorable appearance for a long time.
• Discoloration due to exposure to sunlight.
• Swelling from water getting on the surface.
• They are easily infected by insect pests and fungi.
• Fairly high fire hazard.

Pasting wooden wallpaper on walls using coating technology regular wallpaper There is little difference - only the result. The end result is as if we were decorating the walls with wood.

Features of wall finishing with saw cut

A rather unusual and recently popular option for home decoration is finishing the walls with saw cuts. In this case, a small cross section of the trunk is used as the main decorative element. Decorating the walls of a room with a log frame is very simple.

When running the process:

• The dimensions of the area for finishing with cross sections are determined.

Advice: Don’t be overzealous with this; using an unusual type of wall covering on a large scale will only spoil the interior. Optimally, when one wall is decorated, it is better at the head of the bed.

Work instructions:

• The wall surface is being prepared.
• Painted in a calm color.
• Using special high-quality glue, the log houses are laid.
• They can be fixed:

1. close to each other;
2. design of an interesting fragmentary pattern.

When choosing options for finishing ceilings and walls with wood, everyone should be guided by their own tastes and material capabilities.

How to decorate walls with panels

The most popular type of surface design with panels is a Christmas tree pattern.

To apply it you will need:

• Protractor.
• Convenient hacksaw.
• Double-sided adhesive tape.
• Sheathing.
• Pencil.

Finishing steps include:

• Design calculation.
• Marking the area.
• Trimming planks.
• Fastening elements.

Work technology:

• A diagram of the final appearance of the wall is drawn up on a piece of paper. At the same time, attention is paid to the accuracy of the measurements.
• Strictly in the center of the wall is carried out with a simple pencil a straight vertical line that will serve as the boundary for laying the panels.
• The panels are being prepared. At the same time, they are cut at an angle of 90° so that one edge becomes oblique:

1. one part of the boards is cut off from the right corner;
2. the second is on the left side.

• Take double-sided adhesive tape and attach it to the panels. In this case, each strip should have three longitudinal strips of tape.
• The middle elements are attached. The planks are applied at oblique angles, oriented along the marked line. It is necessary to avoid the presence of gaps between them.
• Panels are fixed on the wall. To do this, remove from the elements protective film, and the slats are pressed tightly to the surface.
• The entire wall is glued in the same way.

Wood is a material that can easily be used to create any creative ideas. Is it possible to cover the walls with wood, what materials are best to use, and the technology for finishing them will be shown in the video in this article.

All photos from the article

Many owners of private houses have recently given preference to natural, environmentally friendly finishing materials. In particular, cladding boards for wall decoration are very popular. In this article we will take a closer look at this material, its types and installation methods.

General information

The great popularity of wood finishing materials is associated with their many positive qualities, among which are the following:

• are environmentally friendly, natural material;
• look attractive;
• are strong and durable material;
• easy to install, so you can do the finishing yourself;
• retain heat;
• If necessary, it is easy to carry out repairs by replacing damaged panels.

Of course, like any other material, wood covering has some disadvantages:

• high price compared to artificial analogues, especially for materials made from expensive species;
• requires periodic care;

Therefore, before deciding to use wood for wall decoration, you need to consider all the pros and cons of this coating.

Types of finishing boards

There are currently many options on the building materials market wood coverings intended for wall decoration are:

• lining;
• imitation timber;
• block house;
• parquet board and laminate;
• croaker;
• unedged lumber.

Below we will take a closer look at each of these types of materials.

Lining is perhaps the most popular board for wall decoration, which consists of panels 12-15 mm thick. It has a groove on one edge and a tenon on the other. Thanks to this, the panels are securely joined together, forming a solid wooden sheet.

The front side of the forcing is flat, reminiscent of timber. Therefore, a house finished with this material resembles a timber frame.

Forcing can be used for both interior and exterior decoration. Due to its light weight, it is also used for cladding ceilings and attic floors.

Like other wood finishing materials, wooden lining differs in the type of wood from which it is made. The most common types are:

On a frame made of slats using self-tapping screws. This process resembles wall cladding with many other wall materials.

In the photo - block house

Block house

This material is essentially the same lining. Its only difference is the profile of the front side, which has cylindrical shape. As a result, the block house imitates a rounded log.

Otherwise, these materials are identical. There is also no difference in the technology of their installation.

Imitation timber is in many ways reminiscent of lining, but it also has some differences in the following points:

• massiveness - the thickness and width of the panels is much greater;
• can only be positioned horizontally;
• has a more prominent relief.

Otherwise, imitation timber has the same properties as lining.

Parquet board or laminate

Interior wall decoration with parquet boards looks unusual and impressive. This material is especially often used to create the effect of extending the floor. To achieve this, the coating is mounted on the wall in the same direction as on the floor.

Advice! Parquet can be used not to cover entire walls, but only part of them, for example, to zone a room or create accents.

The installation instructions for this coating look like this:

• the bottom row of panels near the floor is attached to the wall with dowel nails. Subsequently, the place where the panels are attached will be hidden by the baseboard;
• then to the bottom row using lock connection tenon/groove fasten subsequent rows, which are additionally fixed to the wall with glue, for example, “liquid nails”;
• the top row is also fixed to the wall with dowel nails. The place of their attachment is hidden by the ceiling plinth.

Wane boards

In the process of sawing a log, first of all, the outermost part of the trunk is cut off from two or four sides. As a result, this material is flat on one side and round on the other, covered with bark.

This “top” is called a slab or ash board, which, in fact, is a waste product from woodworking. However, creative designers have found use for it as a finishing material.

You can secure this lumber to the wall using self-tapping screws. The only thing, as in the case of lining, is that you first need to make a frame of slats.

Advice! To get rid of bugs that live under the bark, croakers should be placed in drying chamber and heat to high temperature.

I must say that decorating the walls with ash boards looks very original. Moreover, the costs for it are minimal, since slabs can be purchased at woodworking enterprises for a nominal fee or completely free of charge.

Unedged board

One more original solution is exterior decoration walls with unedged boards. Its principle resembles the installation of a conventional wood siding when the boards are mounted on the wall in a herringbone pattern.

To make this coating look beautiful on the wall, you must first select suitable lumber. After this, a frame is mounted on the walls according to the principle of a ventilated facade, and boards are attached to it with self-tapping screws.

These are, perhaps, all the most common types of boards that are used for wall decoration.

Conclusion

Thanks to the variety of wall boards, they can be used to give your walls the most different type, starting from the classic log house, and ending original options in the form of cladding with slab or parquet. Therefore, before you start finishing, you should think about how you would like the walls to look and how they will fit into the intended interior.

Get more useful information on the topic discussed can be found in the video in this article.

Today, wall decoration with boards is very popular. She helps create different interiors, but they have one thing in common - a love for nature, for everything natural. The article will discuss what types of finishing boards exist, and the choice of which styles can justify the use of wood.

Source france-bijoux.ru

What interior styles allow wall decoration with boards?

Tree - natural material, safe and beautiful, very decorative and surprisingly warm. It can be used to implement any style, this makes it universal. Such finishing is appropriate in loft, techno, and minimalism. If you choose a board to decorate the walls of your house, the interior is noticeably transformed. It goes well with other finishing materials. And this is not the only advantage of choice.

There are a large number of breeds. Each type of wood has its own pattern and color. This allows you to select the material to match the appearance of other interior decor elements. Larch is a very durable material, can withstand high loads, is well processed, can be painted, stained, and is ideal for cladding cold rooms such as a balcony or loggia.

Source premier-les.ru

Pine is moisture resistant, so it is most often used for finishing walls in the bathroom. Oak is an elite material with a very beautiful wood grain. If you use it to decorate the walls of a living room, bedroom or office, both grandchildren and great-grandchildren will admire them.

Linden is a soft wood, easy to process. Designers choose it when they need to make semicircular or curved walls. Walnut, cherry, mahogany are elite species. They are the basis for creating classic interiors.

Source letraycancion.com

There are styles whose implementation is impossible without the use of wood. If Provence is chosen to decorate a living space, wood must be present in the decoration of the floor, walls and even the ceiling. The less processed it is, the better. The deliberately rough texture is ideal for country music.

Source vpdesign5.wixsite.com

Any ethnic style goes best with wood. And all because the concepts of national trends arose when it was the main finishing material, when there was no trace of plastic yet, and metal was very expensive.

Nowadays, antique styling is considered popular. To create interiors, designers specially age surfaces. Wood lends itself best to this type of treatment. If you choose the right base, nature itself will form cracks, chips and potholes on it. Treatment with color will emphasize their presence and show off the “age” of the material. A wall covered with it will look great in vintage interior, in a room decorated in eclectic style.

Source houzz.com

Advantages of using decorative boards to decorate vertical surfaces

Covering the walls with boards improves the sound insulation of the apartment. If you put insulation inside the sheathing, the heat loss in the house will be winter period will be noticeably reduced. This will allow you to start saving on heating costs.

The coating does not require complex maintenance; the slats are additionally coated protective compounds. The latter extend the life of the finish and help you forget about major repairs for a long time.

Wood can be repainted; this operation allows you to radically change the atmosphere of the space and completely update it without capital investments.

Source interior-design.club

Manufacturers offer a wide range of lumber suitable for interior wall decoration. Among them there are affordable options and expensive samples, with the help of which respectable interiors are created. The use of each variety allows you to create your own decorative effect.

Types of finishing boards

Designers actively use five types of finishing boards to decorate walls. They have a lot in common, but they also have their differences. They play a decisive role in shaping the aesthetic effect.

This decorative board is used most often for wall decoration. And all because the material is the most affordable. This fact does not deprive it of all the advantages of wood finishing.

Lining is thin wooden slats that are manufactured in a factory. They are carefully polished from the outer front side, a small chamfer is formed on the sides, which makes the relief of the finished finish textured.

Source 1povagonke.ru

Special grooves are created at the ends; they greatly simplify the installation procedure of the lining. It is installed on a wooden frame. You can hide under it engineering Communication and electrical wiring. If the void formed between the wall and the finished finish is filled with slabs mineral wool, the heat and sound insulation of the room will improve. Decorative characteristics lining depends on what kind of wood was used for its manufacture.

Imitation of timber

Until recently, this material was used for finishing the facade; today, it is actively used to cover the inside of the house. This technique helps to completely change the living space, making it intimate but cozy. If you cover everything with false timber internal surfaces, a feeling of being in the present will be created timber house. Manufacturers produce two types of false beams:

1. One is a clean, untreated finishing board for walls, not coated with protective compounds.

2. The second is a tinted finish, impregnated with antiseptics and a special color.

Source askhome.me

If you want to save money, it is better to choose the first manufacturing option for wall decoration. Then cover it yourself with compounds that protect the wood from fungus and mold. Treatment with a protective varnish will extend the life of the finish. Tinted false beams are more suitable for façade cladding. But it can also be used for interior decoration if its color fits perfectly into the overall style of the interior.

Source derevyannyy.com

Imitation timber differs from lining in that the width of the lamellas is much larger, and the thickness of the board is also greater. There is no chamfer at the edges of the false beam. Otherwise, the design of both boards is similar: there is a tongue-and-groove system at the ends. The materials and installation method are similar.

Block house

The block house has an external front side has a semicircular cross-section. If you lay such decorative boards on the wall, you will get the feeling that it was assembled from a natural wooden frame. Essentially, a block house is one of the four sides of a square-shaped log trunk from which the core has been removed. The material has the most natural appearance.

For production, manufacturers prefer to use pine or spruce. They are easier to process and look very interesting in interiors with different functionality. If such material is selected for creation internal lining, experts advise the convenience of buying boards for walls made of category “A” wood. They have a perfectly smooth surface, which looks especially impressive in the design of living rooms.

Source: grumy.ru

It is used as an alternative to false beams. Outwardly it is very similar to it, the difference is that the planken does not have a tongue-and-groove connection at the ends. This board is also ideal for cladding walls inside a house: the slats have a long oblong shape, and when assembled they look like neatly laid slats. Usually, only one vertical surface is sheathed with them. In this way, designers create accent walls, against the background of which one decorative element will then be revealed.

Source disup.com

The edges of the planken have pointed or rounded chamfers. During assembly, they ensure the presence of even cracks. This element allows you to form a clear rhythm. This is why the appearance of the finished finish only benefits. Gaps between boards - necessary structural element. If the slats absorb a large amount of moisture, they expand. When the air in the room is too dry, they shrink. The presence of a technical gap compensates for fluctuations.

Source mega-les.ru

Parquet board

Today, it is also actively used by designers for wall decoration. Its lamellas also have an elongated rectangular shape, but they are much shorter than the lamellas of a false beam or block house, so after assembly the effect of a deck floor is created. When such decoration decorates the walls, it immediately catches the eye, attracts attention, and stands out from the general background.

Source ashwood.ir

Typically, only one vertical surface is sheathed with this material. Different ways styling allows you to visually change the perception of space. Vertically laid boards raise ceilings. If the slats are laid diagonally, a complex geometry is formed that expands the boundaries and creates a room with a non-standard shape.

It turns out beautifully when the parquet board is laid in one direction on both the floor and the wall. The room stretches out and becomes purposefully oriented.

Video description

The video explains how to install parquet boards on a wall:

Briefly about the main thing

Decorative boards have long been used by designers to decorate walls in the home. If one sheer surface is sheathed with them, it becomes the main accent, Starting point for further decoration of the premises. When all the walls are covered with wood, a special atmosphere of homely warmth appears, which a person likes so much.

And a little more attention

There should be a board in interior decoration! Could you experiment and completely cover one wall in a house or apartment with wood? Write in the comments if you have experience using wood to decorate rooms, how it turned out, and what material you liked best.

Even one wooden wall in a room can revive it and set a pleasant mood for the entire interior. In most interiors, such a wall will be called an accent wall. In some styles that imitate a rustic atmosphere, it would not be a bad idea to make all four walls wooden. There is only one catch: if you are renovating an apartment, then wooden walls initially they are not foreseen in it - they will have to be created using finishing. In this article we will look at ways to do this that differ in cost and complexity.

Pallet boards

What you will need: pallets, sandpaper, stain, nails, antiseptic, tools.

Price: very low - only the price of consumables, pallets can be found for free.

Who to entrust: easy to do yourself.

Cross cuts

A wall decorated with round cuts of wood of different sizes looks very original. They can be glued directly to the wall or to a panel, for example, plywood, and mounted on the wall.

You can’t decorate the whole apartment like this, since the process is labor-intensive, and washing such a wall is a dubious pleasure. The reception is rather decorative and will suit accent wall or even for a small segment of it.

What you will need: branches collected from the forest, saw, wood impregnation, glue.

Price: very low cost of impregnation and glue.

Who to entrust: It’s easy to do it yourself, you can even glue it with children.

Option: if you like a wall made up of small “squares” or textured tiles different sizes, instead of branches, use beams and boards.

Laminate

The same laminate that is placed on the floor can be placed on the walls. This is not natural wood, but the difference is not very noticeable, and the price is significantly lower. The laminate is assembled at the joint and can only be held on the wall with glue or liquid nails, but for reliability you can mount it on metal carcass- this installation option will be more complicated and a little more expensive.

Photos: palletfurnitureonline.com, architecturendesign.net, wowamazing.com, homesemoh.com, kinggeorgehomes.com, hometalk.com, stenamaster.ru