You can buy a desk "CITY" inexpensively in our online store! The desk "CITY" is excellent and most importantly inexpensive option, both for your office and home. Table with great design. The selected color of the table material, and the design - all this will contribute to fruitful work or study, both at home and in the office. The CITY table has 4 comfortable drawers one of which is located under the tabletop, and the other three are on the right. There is also a convenient niche under the table.
Table dimensions :
- Width 1200 mm
- Depth 600 mm
- Height 750 mm
Facade material laminated chipboard
Body material laminated chipboard
Color:
- option: Wenge / Belfort
Desk "CITY" :
CHARACTERISTICS Desk"CITY"
Table dimensions :
- Width 1200 mm
- Depth 600 mm
- Height 750 mm
Facade material laminated chipboard
Body material laminated chipboard
Color:
- option: Wenge / Belfort
- option: Shimo Ash dark / light
Desk "CITY" Available in color options:
Delivery
You can order delivery from us or pick up the selected product from the warehouse yourself in Moscow.
Hassle-free delivery! Read our delivery terms - we will deliver the selected product directly to your address.
Delivery within Moscow within the Moscow Ring Road: RUB 900.00. to the entrance
Delivery outside the Moscow Ring Road to 900.00 rub. plus 30.00 rub. for 1 km.
Pickup from the warehouse in Mytishchi
Delivery throughout Russia by transport companies
Climb
Ascent without an elevator 1 (one) package for 1 (one) floor RUB 60.00.
Elevator ride = 1 (one) package 120 RUR (any floor)
Purchase returns
When you receive your order, carefully check its contents and colors.
Be careful! Immediately inform the driver if the product does not correspond to what you ordered or is defective.
If a product is found to be defective or incomplete after shipment, re-delivery is carried out at the buyer's expense.
Our furniture manufacturing company"FURNITURE TO YOUR TASTE" provides professional furniture assembly services.
Assembly is 10% of the cost, but not less than 1,500 rubles.
Additional assembly work will be charged separately.
More detailed information You can check with our managers about the cost of assembly.
It is possible to schedule assembly as early as the next day after delivery (depending on the workload of the assemblers). The departure of the assemblers is agreed upon with the manager in advance.
The buyer has the right to carry out assembly independently, in accordance with the attached instructions.
Before assembling, be sure to make sure it matches your order.
Remember, purchased goods can only be returned in disassembled form, without traces of attempted assembly!
Be careful when opening the product, keep the packaging until full confidence is that your order arrived in desired color and configurations. Removal of packaging is carried out independently.
Attention! In case of unprofessional assembly, defects may occur, which leads to loss of the right to warranty service.
Many novice craftsmen wonder how to assemble kitchen table without instructions, spending a minimum amount of time on all work. The easiest and fastest option is to use a ready-made tabletop and legs. This design with correct installation can last quite a long time. There are other options for kitchen tables: completely wooden, corner, folding. They are all assembled according to approximately the same principle.
Required tools and materials
Most often, when assembling a kitchen table, furniture panels and chipboard (laminated chipboard) are used. The main advantage of the first option is ease of use. On sale there is a pine board that can be easily drilled and sanded. You don’t need a workshop to work with it – you can assemble the table right at home. Panel furniture also has disadvantages. It has to be polished until flat surface and further process protective coatings– impregnation and varnish.
Special attention worth paying attention to. The larger this parameter is, the stronger the furniture will be. A thin tabletop without additional reinforcement can bend under the weight of objects. For a table, it is not recommended to buy a furniture panel whose thickness is less than 3 cm.
Laminated chipboard is a more difficult material to work with: chips may form during cutting, and an edge will need to be glued to all open cuts. It is easier for novice craftsmen to buy a ready-made countertop made of chipboard the right size or order cutting and gluing of the edge when purchasing the material in hardware store. Chipboard also has its advantages. These include a wide range of colors and a variety of textures.
To create a kitchen table you will need furniture fittings - fastenings and ready-made supports. Sometimes timber is additionally used. With its help, they prevent sagging of furniture made from panels. To do this, a rectangular frame is made from timber. This design is called the underframe. Its task is to distribute the stress that most affects the corners of the furniture. Then the tabletop is placed on the frame. The timber is also used as table legs.
Tools you may need are a drill, a screwdriver or a screwdriver. The legs are often attached to the top of the table using self-tapping screws. Sometimes metal corners are used as fastenings.
Preparing for assembly
The instructions for assembling the kitchen table are simple. The first stage is preparatory. It starts with . First you need to decide how many people the table will be designed for. One seat is about 60 cm. Thus, the length of a table for 4 people will be about 1.2 m. The width depends on the area of the kitchen. For small rooms it can be 75-80 cm.
U professional assemblers, including tables, will depend on the type of construction. It’s easier and faster to work with ready-made furniture supports. In this case, all the work will consist of marking the fasteners and installation. It is best to use adjustable legs. Such supports can be adjusted to the desired height after leveling the tabletop. These legs are suitable for those who have uneven floors. Alternatively, you can make the table on two supports. They are sold in stores furniture fittings.
Assembly steps
Let's look at how to assemble a kitchen table with chrome legs. This option is simple and can be applied to any countertop. First, let's put marks for the subsequent screwing of the legs. Let's lean the mount against the tabletop and mark the points for the screws with a pencil. After this you need to screw the mount. To do this you will need a screwdriver or screwdriver. Then you need to install the leg into the mounting location. It easily screws into a special hole in the center. Similar actions need to be done with the remaining supports.
More complex issue– how to screw legs to a wooden kitchen table. Such a design is much more difficult to assemble, since you need to think about the types of connections.
The classic one is strengthened with the help of a special base, which is a frame made of timber. Minimum height each plank is 12 cm, and the thickness is 3 cm.
If the legs are made of timber, then their cross-section should not be less than 6x6 cm. Traditionally, the entire structure is assembled using a tongue-and-groove connection. Then, to fasten the slats and legs together, use metal corner. After this, they move on to installing the countertop. It can be connected to the base using screws.
Features of assembling a corner structure
Corner table is suitable for small kitchen. This model saves space and looks quite unusual. To construct a corner table you will need a table top and 2 or 3 legs.
How to assemble a corner kitchen table (instructions and step by step guide):
- Mark the length and width of the future tabletop on the furniture board (both parameters are measured from the corner). Connect the two resulting points with a straight line or arc. The table cut can also be made curved.
- Cut out the resulting shape using a jigsaw. Sand all edges with sandpaper.
- Attach the leg to the tabletop and mark the attachment points.
- Screw the legs to the top of the table using self-tapping screws.
- If corner table Only 2 legs, then for greater stability it can be additionally attached to the wall.
Another option to save space is to make one that will be a continuation corner kitchen. This design is multifunctional and easy to implement. The table can be used as an additional work surface or take food after him.
How to assemble folding table for corner kitchen:
- Prepare the countertop. From furniture board of small thickness, use a jigsaw to cut out a semicircle of the required size.
- Go over the cuts with fine-grit sandpaper.
- Cut out a rectangle with a width of 12 cm and a length equal to length countertops. Sand the edges with sandpaper.
- Cut out the future support - 2 rectangles 20 cm wide and a length that is slightly less than the length of the top. Cut one piece diagonally into 2 triangles. Sand all edges with sandpaper.
- Connect the tabletop and the first piece. For this purpose in upper corners loops are applied, which are then screwed with self-tapping screws.
- Place one triangle in the middle of the rectangle. Connect the parts using a long fastening loop. The triangle should be movable and easily move to the side.
- Attach the support to the wall on required height. Place the tabletop on the support and connect them at the top center using self-tapping screws.
Milky colored transformable dining table for guests
For a small apartment, furniture such as a transforming table is irreplaceable. It can be easily converted from a compact coffee table into a full-fledged dinner table for several persons.
The coffee table easily turns into a full-fledged table for entertaining guests
Read our instructions and make sure that assembling the transforming table is very simple.
Dining and coffee options for a transformable table with dimensions
Necessary tools for furniture assembly
To successfully assemble the transformer you will need:
- Phillips screwdriver or screwdriver with attachments;
- furniture hammer;
- fasteners and accessories included in the delivery kit.
Detailing the table frame and its legs
Box with fittings and fastenings
Despite the many offers on the furniture market, for most manufacturers the process consists of the following steps:
Housing assembly
Assembling the corner legs of our table
All legs for the transforming table are assembled
Corner legs of two halves are connected with screws or eccentrics. In the same way, a body is assembled from long and short drawers.
Detailed case assembly process
Screw the legs to the body according to the instructions
IMPORTANT! Special holes are made on the legs and drawers for simultaneous installation of the lift and screed of the entire structure. Check after assembly if they match.
Assembled base with legs
Nail the plastic foot pads to the bottom ends of the legs. At the upper ends of the drawers, install shock absorbers to soften the impact of the tabletop when folding it.
We nail heel pads to the legs
Installation of the lifting mechanism
Installation diagram of the lifting mechanism
Bring the lift into working position. For this:
Fixed springs for operation of the transforming table mechanism
The mechanism is in a calm, unexpanded state
IMPORTANT! The legs of the holders designed for a folding tabletop are higher than those made for the underframe.
Mechanism for bringing the table to the upper position
Installation of countertops and underframes
Mounting a smaller part of the countertop
Installing the base for a large part of the tabletop
Screw the bottom flap of the book-table top and the base to the holder platforms. WITH outside Under the table, install shock absorbers that absorb shock when unfolding the tabletop. Using an outside-in motion, fold the lift legs into the box. It will be covered by the bottom of the tabletop.
Fix the upper movable part of the tabletop
Install the second half on top so that the end holes under hidden hinges were on one side, and their center-to-center distance was minimal (about 14 mm). Carefully insert the hinges and secure with screws.
Hidden hinges to secure the table when assembled
The table you assemble will last a long time. Do not forget to tighten its fastening joints once a year, clean the surface with a dry soft cloth or a special furniture polish.
Coffee version or folded table
The process of transforming a table from a coffee table to a table for receiving guests
Dining option or unfolded table
Video: Transformable table. Assembly
Delivery cost to Moscow within the Moscow Ring Road and to Nizhny Novgorod within the NKAD: + 500 rub. bedside table (1-2 pcs.); ottoman, coffee table; mattress up to 1.0 m (inclusive), chair-stool (1-2 pcs) + 700 rub. dresser; shoe rack; TV bedside table without add-ons; computer desk and desk; table-book and dining table; pouf-sofa; pouffe bed; 1 hallway element; chair-bed; kitchen corner (cabinet); kitchen sofa (soft) up to 1.5 m; a mattress wider than 1.0 m, a chair-stool (3-4 pcs), a rack (like a column) + 1000 rub. hallway, closet, wall, kitchen up to 2.5m; kitchen corner (soft assembled); sofa; dining table + 4 chairs, shelving (like a closet) + 1200 rub. hallway, closet, wall, kitchen from 2.5m to 3.5m; + 1500 rub. hallway, closet, wall, kitchen more than 3.5 m; corner sofa(ottoman); sofa + 1 armchair; children's room with mattress; single-tier bed and ottoman: up to 1.40 m (inclusive) +1000 rub; with mattress (orthopedist) +1200 rub; with mattress and orthopedist +1400 rub. wider than 1.4 m and 2-tier: +1200 rub. Delivery to Moscow within the Third Transport Ring: at 4-5 am - no extra charge; not at night - + 500 rub. Delivery to shopping center (products to other regions of our country) + 500 rub. to the invoice and the client’s consent for lathing and insurance Delivery outside the Moscow Ring Road or NKAD + 35 rubles/km. Delivery within St. Petersburg: 1 module of a modular sofa, cabinet, chest of drawers, shoe rack, dining table, coffee table, hanging shelves, desk, dressing table, chair-stool (1-4 pcs.), pouf, mattress - 1200 rub., computer desk, kitchen cabinet corner, armchair, banquette, pouf-sofa, kitchen sofa up to 129cm - 1500 rubles, hallway, wardrobe, wall, TV stands with add-on, kitchen up to 2m, bed without mattress - 2000 rubles, hallway, wardrobe, wall, children's room (w/m), kitchen from 2 to 3m, sofa, straight ottoman, ottoman bed, kitchen sofa, bed with mattress - 2500 rubles, hallway, closet, wall, children's room with mattress, bedroom, kitchen from 3 to 5 m, bed + mattress + drawers, orthopedist; corner sofa, corner ottoman, sofa + 1 armchair - 3000 rub. Delivery beyond the Ring Road - 30 rubles/km. Delivery time for orders is up to 2 weeks. When issuing an invoice, a surcharge of +6% is added to the total cost. Manufacturer - Atlant.
Lifting conditions
Ascent floor by floor (elevator = 2 floors) + 150 rub. lunch or magazine table; 1 hallway element; chair (kr-kr) + 250 rub. hallway, closet, wall up to 2.5 m; sofa; kitchen corner (corpus and soft); dresser; computer table; bed (any) + 350 rub. hallway, closet, wall, kitchen from 2.5m to 3.5m; corner sofa or ottoman; bed (ottoman) with mattress + 450 rub. wall, closet, hallway, kitchen more than 3.5 m.
Assembly conditions
Assembly upholstered furniture: + 200r. sofa, + 300 rub. corner sofa, corner ottoman Assembly of cabinet furniture: + 10% of the cost, but not less than 1000 rubles, if there is space for assembly on the floor; + 15% of the cost when assembling vertically, i.e. gathers in place (standing); + 20% built-in furniture and kitchens; +150rub. per 1 hole when hanging or wall mounting Assembly wooden beds: + 600 rub. single bunk bed without drawers; + 1000 rub. bed (1 and 2-tier) with drawers and orthopedist.
Terms of delivery to regions of the Russian Federation
Delivery to shopping center (products to other regions of our country) + 500 rub. to the invoice and the client’s consent to the lathing and insurance.
