Rolls for windows are interesting, attractive in appearance, multifunctional curtains that will fit into any interior and will become great solution for protection from dust and sun. They do not contain harmful substances and are made from a variety of materials.
What is the structure?
What should quality curtains be like?
When choosing a roll model for your home, direct attention should be paid to the quality of the material from which it is made, and also pay attention to the mechanical parts. They must be made of steel, well painted, and not chipped.
The fabric, regardless of what kind is used, must be strong, pleasant to the touch, durable, and free from mechanical damage, holes, and abrasions. is not afraid of temperature changes, does not fade when exposed to sunlight, and does not require complex care. Many manufacturers treat fabrics with antistatic agents; Over time, these properties may be lost, so the fabric needs to be treated with an antistatic aerosol from time to time. There are curtains that can reflect heat and are treated with an antibacterial agent.
When installing roller blinds, choose models that create between the material and the glass air gap. This design contributes to less heating of the room and glass. IN winter time will not enter the room cold air. The atmosphere in the room and the lighting in the room also depend on the type of material used. If it diffuses light, it makes the lighting in the room soft and pleasant. Such products are usually used for decorative design, creating a cozy atmosphere.
Manufacturers offer quite a variety of materials for curtains. More can be used original solutions, such as bamboo or other types of wood. Such curtains are usually horizontal, have an attractive and original appearance. The material has high anti-wear properties, is pleasant to the touch, and is easy to maintain. Such fabric is not afraid of fading. The only drawback can be considered the large mass of the canvas. Drilling into the wood may be required to secure the structure. It is also not recommended to place it in places where there is high humidity, for example, on a balcony or in the kitchen. In addition, when strong wind Such curtains can create significant noise.
If you use a fabric option, the degree of illumination may vary depending on what material is used.
Roller blinds are a profitable purchase for home and office. They will make the room comfortable and allow you to adjust daylight.
Modern plastic windows installed not only in offices, but also in residential apartments. They are not only neat, but also practical, which time has already proven. This design does not have to be hidden behind massive curtains, because they themselves are already an interior decoration. Roller blinds will be an excellent decoration for plastic windows due to their compactness and functionality.
Roller blinds are modern “clothes” for windows. They are a certain size of material wound on a shaft. And the shaft, in turn, is installed in the upper part of the window frame. A special mechanism forces the material to wrap around the shaft.
Roller curtains are considered a stylish and fashionable window design. They can decorate the window opening of a kitchen, bedroom, living room, nursery, and even a balcony. Depending on the purpose of the room, their color and pattern are selected (optional).
Exist Various types roller curtains, and there are several ways to install them. Let's look at this in more detail.
Types of curtains by type of mechanism
There are two types of products:
- classic;
- cassette.
For classic look characterized by open access to the fabric on the drum, as well as a loose fit to the glass. The curtain at the bottom has weights that do not allow the fabric to sag. Nobody hangs open roller blinds in the kitchen.
If we consider cassette type, then in it the drum on which the matter is wound is located in a special closed box, which is called a cassette. The material is located on the sides in slats - guides, which are attached to the window glazing beads. Thanks to this, the finished product fits tightly to the glass, protecting the room from bright sunlight. This type of roller blinds is very attractive for windows; the fabric in it moves vertically.
Drawing a conclusion from the above, it must be said that the cost roller blinds closed type will be higher than the cost of classic ones.
Types of curtains by fabric type
Like regular ones, roller blinds for plastic windows can be distinguished by the degree of light transmission. Depending on the fabrics used, they are:
- Transparent– are considered decorative, easily transmitting and scattering light. They are installed in pairs with curtains and drapes.
- Dimout- denser than transparent ones, which partially transmit light. Mainly used in office premises, in meeting rooms.
- Blackout– the quality of the fabric is dense, when you close these curtains you get complete darkness. Recommended for children's rooms and bedrooms.
- Day Night- remind horizontal blinds, in which wide transparent and dense stripes alternate. Can be used for windows in any room.
Fabric roller blinds can be attached to each window sash or to the entire window. In the first case, the protection will be more reliable. If we consider the option of roller blinds for a whole plastic window, then its cost is much lower than the same product for each sash. And it’s all about the number of elements for fastening, the number of mechanisms and drums used. This type of fabric curtains is used at exhibitions, in shops, in conference rooms, and in museums.
Roller curtains with photo printing have a modern look. They are the ones who create indoors certain style and comfort. Using their aesthetic capabilities, you can make the interior of the room strictly to your liking. For curtains, you can choose photographs of mountains or impenetrable jungles, then the decor in the room should be appropriate.
To constantly remember an event, you can place its photo on the blinds. In the children's room, you can place your favorite cartoon characters on the curtains, then the child will not need to watch an episode of his favorite cartoon before going to bed - he will definitely come up with it himself.
To choose a design for roller blinds, you can go to the online publication, which will provide examples and photos of finished products for plastic windows. The drum on which the patterned material will be wound can be open.
Product advantages
Since various fabrics can be used for their manufacture, they are gaining more and more popularity among buyers every day. Their main advantages:
Types of installations
When ordering roller blinds, you can use and pay for the services of professional workers who will install the finished product. But this service is not cheap, so if your family budget limited, then for this money it’s better to order expensive fabric for roller blinds, and do the installation yourself.
For curtains you must order only high-quality fastenings so that they serve you for a long time and do not break. The durability of the product will also depend on how correctly the product is installed on the window.
There are two types of fastening:
- external (to the wall or to the ceiling);
- internal (to the plastic window).
A classic roller blind can be attached to a window with or without drilling. Installation by drilling will be more reliable and durable, but for this you need to make the markings correctly, carefully drill holes and carefully install the mount.
To install the curtain fabric on each window sash, you need to install its fastenings on the window frame using self-tapping screws. If one curtain will be installed on the entire window, then the fastenings can be installed:
- on the wall above the window;
- on the ceiling.
If you install classic roller blinds on a window sash that will open, then you need to take into account that at this moment it will not fit tightly to the window, since it will be tilted. For such windows, experts recommend buying cassette roller blinds, which don’t care what angle the window is at - it will still be closed.
Installation of brackets to the ceiling or wall will be reliable only if the wall and the plaster on it are strong. The structure should not collapse under the weight of the roller shutters.
If you decide to install ready-made curtains without drilling directly onto a plastic window, then this option will be the simplest. The main thing in it is buy quality glue and tape, and detailed instructions can be found in the middle of the package. The work is so simple that even a teenager can do it.
Subtleties of installing cassette roller blinds
These curtains must be installed directly on the window frame itself. Each package for this product contains detailed instructions, which describes the following steps:
Having become familiar with brief instructions, you can understand that installing roller blinds on a plastic window with your own hands is not at all difficult.
How to choose roller blinds for plastic windows
Increasingly in modern apartments you can find roller blinds that simply eclipsed bulky curtains and drapes. Spaciousness and airiness are characteristic of all rooms in the apartment, and roller blinds can be installed on any window in any room.
Depending on the purpose of the room and its style, the design of the roller blinds is also selected. If the walls of the room are painted in a calm, monochromatic color, then “clothing” for windows can be colorful and bright. Roller blinds whose color matches the color of the furniture will look laconic.
Depending on which side the windows of a particular room are located, the fabric for the roller blinds is also selected. If the side is north, then dark shades for curtains may not be needed. And if it is on the south side, where the sun is very hot all summer day, then you need to choose dense, dark materials.
The same should be done with the windows on the balcony, where the sun shines all day long.
Curtains with various prints and images are especially popular.
When choosing cassette roller blinds, pay attention not only to the color of the curtains themselves, but also to the color of the box. In theory, it should match the color of the window frame.
If you decide to install roller blinds on the window yourself, then you need to decide on the direction of movement of the curtains - according to clockwise or counterclockwise.
Before drilling holes in the window frame, you need to make sure that there will be no interference when opening and closing the roller blinds.
Conclusion
A modern, attractive and affordable “clothing” - roller blinds - is perfect for a plastic window. With their help you can give the room modern look, show your preferences, express yourself. They will protect from scorching sun and from the prying eyes of passers-by.
Choose the fabric you like, the method of fastening and create the comfort you are used to.
We bring to your attention a description of roller blinds from Andrey Turchanov, manager of the company's roller blinds sales departmentOLEXDECO , manufacturer and seller of window decoration products.
What are roller blinds
Roller blinds (also known as blinds or roller blinds) are a popular modern light protection device. The curtain fabric with one edge is attached to the hollow metal pipe(valu). Placed at the ends of the pipe lifting mechanism which is driven by a control circuit. When the shaft rotates in one direction, the fabric is wound around it - window hole opens. If the shaft rotates in the other direction, the curtain unwinds, lowers and closes the window.
The curtain canvas can be fixed at any height, leaving the necessary part of the light opening open. In this way, the amount of light entering the room can be adjusted quickly and effortlessly.
Main types of roller blinds
Today, types of roller blinds for plastic windows are available on the market for different practical solutions, with different technical features and for every taste. For example, you can choose open roller shutters (winding shaft and parts lifting mechanism remain visible) or closed type (technical elements are hidden by a decorative box).
But due to the ease of assembly, installation and use, three types of roller blinds are most in demand:
- "Standard"– a model designed for installation on a wall or ceiling outside a window niche. Thanks to this, one roller curtain covers the entire light opening. The width of such a roller blind can be from 60 to 180 cm;
- "Mini" – the best option when mounted separately on each window sash(possibility of installation on the wall and ceiling remains). Modern plastic windows in most cases have two transoms, one of which is “blind” (does not open), and the other is tilt-and-turn. The presence of side fishing lines that hold the canvas in a stable position even when there is wind or the sash is tilted is another bonus;
- "Day Night"– the original version of the “Mini” roller blinds. Stripes of varying degrees of transparency are alternately applied to the curtain fabric. As the fabric rises and falls, it moves in a closed loop. Due to this, the stripes move one on top of the other, closing and opening access to light.
Why are roller blinds the best choice?
Let's make a visual comparison of roller shutters with the usual ones fabric curtains and metal blinds. To do this, I have compiled a table in which each type of decor is assessed according to its compliance with the main parameters.
| Options | Roller blinds | Fabric curtains | Metal blinds |
| Attractive appearance | High(possibility to use canvases of different colors and patterns) | High (big choice fabrics by texture, colors, patterns) | Low(only one option is widely available - white metal strips) |
| Versatility of use in the interior | High(harmonious in various design styles) | High(look organically in various design styles) | Low(suitable for a business environment; looks too “dry” in a residential area) |
| Ability to adjust lighting | High(materials of different densities and the ability to stop the fabric at any level allow you to set any level of lighting) | Average(in most cases, two options are available - completely close or completely open access to light) | Average(they make it possible to create comfortable twilight, but do not allow you to completely block the light flux) |
| Ease of use | Simple(raising and lowering of the canvas is carried out by one control circuit) | Complex(with a large mass and significant height of the curtains, their manual movement may be difficult) | Average(control does not require effort, but two mechanisms have to be used (vertical lifting and shifting of the plates)) |
| Easy to care for | Simple(canvases are not demanding on conditions environment, they are easy to clean) | Complex(require favorable conditions; cleaning and washing are long and labor-intensive) | Simple(to keep clean hardware just wipe with a damp cloth) |
| Installation variability | High(mounting options on the wall, on the ceiling, in a window niche, on the window frame) | Average(the main installation methods are to the wall and to the ceiling; mounting between walls is possible) | Average(wall and ceiling ways fastenings) |
| Possibility of placement on inclined windows | The best way design of inclined (dormer) windows | Maybe– but only in a stationary state, as a decorative option | Impossible |
| Safety | High(do not accumulate dust, are resistant to fire, children and animals will not get entangled in roller blinds) | Low(accumulate dust and harmful particles, are highly flammable, potentially hazardous to children and animals) | Low(do not accumulate dust, are not subject to fire, are not hazardous) |
| Price | Average | High(taking into account the need to buy a cornice) | Low |
What does the roller blind fabric consist of?
Modern technologies make it possible to choose different types of fabrics for roller blinds. But the most popular version is polyester fabric.
This synthetic material perfectly complemented the roller blinds. Polyester does not stretch and does not absorb odors. Does not accumulate dust and dirt particles (with Teflon coating). It reflects part of the sun's rays, providing a comfortable indoor microclimate. When in contact with fire, polyester does not give off an open flame, smolders and gradually fades out.
The choice of fabric for roller shutters is determined by two motives. The first is the buyer’s aesthetic preferences (the color of the canvas, the presence of patterns and designs on it).
Second - degree of transparency of the canvas, that is, what quantity street light it lets you into the room. According to this indicator, fabrics are divided into:
- transparent– transmitting up to 65% of light;
- translucent– up to 45% of the light flux passes through them;
- darkening– transmit up to 5% of sunlight;
- opaque(blackout) - do not allow light to pass through and allow you to completely darken the room.
Installation features
For any roller blind and with any type of mounting (ceiling, wall, frame) prerequisite quality installation are correct measurements. Each type of roller blind requires special measurements, the order of which is clearly shown in the product instructions. And the seller must clearly explain to the buyer what parameters will need to be measured in order for the roller shutters to look beautiful and work properly.
Let's consider separately the types of fastening for each model of roller blinds:
- "Standard"- the width of the canvas is calculated by measuring the width window opening+ the necessary supply of fabric on each side of the niche. Ready product fastened using dowels and self-tapping screws to brackets included in the sales package;
- "Mini"- the width of the fabric should be equal to the distance between the joints of the glazing beads with window frame. Thus, the canvas must not only cover the light gap, but also have a certain margin. The roller shutter is attached to the frame in three ways. The first is using a throw-on bracket on a rotating transom. The second - with self-tapping screws to the “blind” sash. The third - to the frame without drilling, on both sides duct tape(scotch). Wall or ceiling installation is possible traditional way(screws and dowels);
- "Day Night"— measurements and installation are carried out in the same way as for the “Mini” model.
Note: The “Mini” and “Day-Night” roller blinds are equipped with side lines (anti-wind system). In this case, special brackets are installed on the lower part of the frame on both sides, in which the fishing line is fixed, previously passed through the upper holders.
How to choose and how to use roller blinds
In order to optimally select a roller blind by type, size, color, light transmittance and other characteristics, you need to know all the buyer’s requirements and the features of the room where the roller blind will be located. However there is some general principles, knowledge of which will definitely come in handy when choosing roller shutters:
- for use with traditional fabric drapes It’s better to choose “Mini” and “Day-Night” roller blinds. They can be placed inside the window niche, close to the glass, so they will not interfere with the movement of the curtains;
- for decorating windows on the south side Roller blinds “Standard” are more preferable. They completely block access to the sun's rays, creating a comfortable environment in the room. In addition, the wallpaper will not fade in the sun, furniture upholstery, flooring;
- for windows in the bedroom and office I recommend the “Day-Night” model - it allows you to quickly and easily set the required level of illumination. In an office, for example, this makes it possible to eliminate glare on computer monitors;
- when used on balconies It makes more sense to use “Standard” roller shutters. On balconies there are usually only two swing-out sashes, the rest are “blind”. It is more profitable to install roller blinds of considerable width on solid window sections - you will need fewer individual roller blinds;
- for roof (sloping) windows it is necessary to buy roller blinds with side lines (“Mini” and “Day-Night”), due to which the canvas will be held parallel to the glass;
- if the surface of the window sill is used as effective area (as a desktop, bookshelf, recreation area, etc.), the best option will become a “Mini” roller blind. It will allow you to leave the window sill as free as possible;
- attaching roller blinds to the frame without drilling(on double-sided tape) - a way to avoid damage to the plastic window. However, you need to remember that even the highest quality adhesive tape loses its fastening properties over time. Therefore, if you require the most reliable and long-term installation, it is better to use a proven option - installation with self-tapping screws.
5042 0 0
Roller blinds for plastic windows - varieties and 3 installation methods without drilling the frame
Roller blinds or roller blinds for plastic windows are now experiencing the peak of their popularity. In addition to beauty and convenience, people appreciate the ability to attach these mechanisms without drilling the frame. Let's go through the types and models of such curtains, and I will tell practitioners in detail and show how to install such mechanisms in 3 ways, independently and without using practically any tools.
Types of curtains for plastic windows
Let’s be clear right away - we’ll talk about how to attach curtains with a roller mechanism to a PVC frame without damaging the frame itself. Models that are mounted on walls or in window openings are not of interest to us in this case. But first, let's figure out what types of overhead curtains exist:
- Curtains and blinds They were, perhaps, the very first to install them on plastic windows. The model is not bad, but from the moment it appeared on the market, it began to be mercilessly used in offices and administrative buildings, so people associate blinds with something official and not entirely cozy;
- Corrugated models or as they are also called pleated curtains. In this case, there are no problems with originality and homely warmth, but such a pleated “accordion” is quite difficult to care for. Imagine how to clean such curtains, but we are not talking about machine washing at all, the folds will not tolerate it;
- Vertical roll mechanisms in this series they act as a golden mean. After all, what could be more homely than a smooth woven fabric with patterns. This fabric can be removed, washed, ironed and hung back at any time. Plus average price for flat models is slightly lower than that of blinds and corrugations.
But that’s not all, the roller mechanisms themselves are divided into 2 subtypes:
- The simplest and most affordable models are considered open type. The shaft with the wound web is open here, and in order for it to hang tightly evenly, a weighting strip is attached to it along the lower edge;
- So-called cassette curtains for plastic windows cost half as much. They differ from the previous version in that the roll is hidden in a box (cassette), and the web moves along guides.
In turn, cassette mechanisms are divided into 2 more models: UNI1 and UNI2:
- In the UNI1 model, the “rails” for the canvas are attached to the side of the window bead from the inside. As a result, the canvas moves almost close to the glass;
- The UNI2 model is placed directly on top of the glazing bead and there is a gap between the glass and the canvas equal to the thickness of the glazing bead.
Three ways to install roller mechanisms
As I promised, in all 3 methods you will hardly need any tools, but you will still have to prepare a tape measure, a pencil, scissors, a knife, double-sided tape and a bottle of cologne or alcohol.
There are now mechanisms on the market with roll lengths from 300 to 1400 mm, and the choice of one method or another depends on the dimensions and weight of the model.
Method number 1. Opening frame hanger
| Photo | Explanations |
 |
Suspension device.
In this model, the roller with the canvas wound on it is attached to 2 plastic hooks, which in turn cling to the top side of the opening window frame.
|
 |
Hook assembly.
The hooks in such hangers are collapsible, this is done so that the size of the grip can be adjusted according to the thickness of the window frame. |
 |
Roll holder. |
 |
Fitting.
Now we need to determine the location of the mechanism. To do this, we put it on the window frame and mark with a pencil the location of the hanging hooks.
|
 |
Degreasing.
Before finally attaching the hooks, the frame must be wiped with alcohol to degrease it.
|
 |
Attaching hooks.
Now remove the protective tape from the tape and install the hooks on the frame according to the markings. |
 |
Insert the lifting mechanism.
The lifting mechanism consists of a carriage and a chain. The carriage is built into the suspension, you only need to thread the chain into it. |
 |
Assembly.
Now insert the shaft itself with the blade into the holders. |
 |
Tests. |
Method number 2. Blind sash
| Photo | Explanations |
 |
We attach the tape.
Since the sash does not open, there is nothing to cling to, so we will glue the brackets with double-sided tape.
|
 |
Installation of holders.
The technology here is similar to the option with hooks - the holders are inserted into special grooves. |
 |
Marking.
Now we temporarily assemble the entire system and, placing it in the appropriate place, mark the installation points of the brackets. |
In essence, roller blinds are a kind of blinds. They are a structure made from a system of guides and woven fabric. They got their name because when assembled they are rolled into a roll.
The fabric used to make curtains can be very diverse - from thin, almost transparent, to dense.
Such a canvas is usually assessed by its light transmittance, absorption and reflectance characteristics. After all, with the help of these curtains you can adjust the illumination of the room or other room where they are located.
The main material from which roller curtains are made, as a rule, has antistatic and dust-repellent properties.
And this is quite justified, because Such designs are not intended for washing. This is an additional advantage of such “curtains” - they are easy to maintain.
Experts divide roller curtains into several different types. Most often they are classified and selected based on the glass surface they will apply.
For example, experts call the following types of roller curtains:
- open;
- cassette;
- mini;
- rollo;
- large rolls.
Open type
This is the most common type. They as easy as possible to manage.
The design looks like this: there is a shaft on which the entire structure is wound. This shaft is attached to the wall using special corners.
The lower plumb line along the edge of the canvas is necessary so that the curtain maintains the evenness of the canvas when it is opened. The curtain fabric along the side surfaces is reinforced with an additional guide in the form of a regular fishing line, which allows it to maintain an even position and remain in place even in drafts. You can learn more about choosing fabric for curtains.
Cassette version
The design of cassette options differs in that the shaft on which the fabric is wound is completely hidden under the cassette box.
Such boxes can be round or angular. At the same time, you don’t have to worry that the cassette box will ruin the appearance of the window. It is quite aesthetic, plus its color perfectly matches the shade of the canvas.
In mini-cassette roll versions, the design is the same as in conventional cassette versions. They differ only in that the mini ones are designed strictly for the dimensions of the opening where they will be located.
They are more compact and look very neat even in windows or doorways small size.
Rollo
Rollos are usually designed for skylights. It is for such surfaces that roller blinds are very important both during the day and at night, because... The sun and moon can overextend the room.
Rollos are extremely convenient for precise installation and are easy to maintain.
Large roller blinds
They are structures designed for use on very large open surfaces, such as store windows or glass stands.
In addition, roller curtains are often qualified by their light transmittance.
There are 4 types in total:
- transparent;
- translucent;
- Dim-out (assuming up to 90% dimming);
- (up to 100%).
Features of day-night roller blinds
Roller curtains day-night are adjustable natural light indoors using curtains rather than blinds.
Many people are facing the problem excessive room illumination. If in winter this is a plus, since the rooms are much warmer than those located on the shady side, then in the summer this becomes a problem.
The optimal solution is provided by day-night roller blinds. They can rightfully be called a more modern and economical analogue of blinds.
Distinctive characteristics of roller blinds
They have many advantages compared to other methods of eliminating excessive room illumination, here are the most significant of them:
- ergonomics– when folded they are almost invisible. In the upper part of the opening there is a small tube in which there is a roller with fabric wound around it;
- control is carried out using chains. In the day-night system there are two of them, not one, since it represents more difficult option, consisting of two pieces of fabric ( conventional design one is used). Each one is made of alternating horizontal stripes transparent and dense fabric.
Regulating their overlap makes it possible to regulate the degree of illumination of the room.
Mini roller curtains
Economically profitable solution allowing you to save money. A striking example of this are mini-type structures.
They are placed directly in window opening, which significantly reduces fabric consumption and makes the product lighter.
The design uses a shaft of smaller diameter, which also has a positive effect on General characteristics. The tube, with the sections folded inside, is visually almost invisible.
Materials for making roller shutters
Most often they choose to make canvases quality polyester. It is usually supplemented with linen, cotton, viscose, etc.
The mounting and main structure are usually made of plastic High Quality– it will not crack or break in the first days of use.
Design of roller curtains for a doorway
Sophistication of design. It should be borne in mind that such blinds for a doorway can be ordered from almost any type of material.
This allows you to get away from the usual stereotypes and really do unique design interior, for example, taking advantage of the opportunity given.
Roller blinds with guides
There is another system of roller curtains - closed. They are also often called roller blinds with guides. The functionality of such curtains is quite specific - most often such designs are used in rooms where it is necessary to achieve maximum darkness: children's rooms, operating rooms, etc.
The difference between such curtains and ordinary ones is that they are additionally reinforced on the sides with guides, which makes the structure look like a frame.
At the same time, both the frame and the guides can be easily matched to the color of the window itself. The canvas in such options belongs to the Black-out category, which gives them the opportunity to be as dark as possible.
Sometimes, to achieve 100% blackout, such curtains are supplemented with a rubberized base.
Advantages and disadvantages of roller blinds
Naturally, roller blinds, like any other, has its own characteristics - both positive and negative.
To the undoubted benefits include:
- wide selection of colors, shades, textures, textures. You can choose a suitable canvas for any surface. And it is not at all necessary that the canvas be monochromatic. It may well contain drawings and printed pictures, which will look neat and natural and can be used in any interior;
- fabric quality. A variety of materials, plus their additional impregnation with a special composition, allow the canvases to maintain their beautiful appearance for a long time, not fade in the sun, and not accumulate dust (as well as);
- the presence of anti-glare and heat-insulating properties, which is quite important for;
- optimal combination with other types of curtains, For example, ;
- complete darkening of rooms correct selection structures;
- compact size. They are very convenient to group and assemble (like) and can easily release and open the window sill;
- mounting variations. Roller blinds can be attached to the window in any convenient way: completely above the window, on the sash, etc.;
- easy to care for. These window curtains can simply be wiped with a damp cloth. Random stains from such structures can be removed using warm water and soap.
Among the disadvantages The following are distinguished:
- components that are not durable enough. Despite the fact that they are quite strong, they can easily be broken if used carelessly;
- the fabric can absorb odors. This is worth considering when hanging a roll;
- installation directly on the frame or inside the opening makes it difficult to open windows or windows.
Installing roller curtains in different rooms
You can install such curtains in the entire apartment at once. In addition, they are often combined with traditional curtains.
The installation method and type of curtains are optional. But it is worth considering some nuances that will allow you to use roll structures to the maximum.
So, for example, for installation in the kitchen it is better to choose curtains that will be attached to the doors. This will allow you to adjust natural light, plus free up a lot of space.
You can choose for the room standard options. But if you are going to combine rollers with curtains or simply use them as a light filter, they should also be attached to the frame or sashes.
Roller blinds are a great option for your home. This is due to the fact that they are easy to keep in order and do not need to be washed and ironed.
A additional benefit is the possibility of installing them yourself. This means that you don’t have to waste time calling the experts and waiting for them to arrive.
