A bedside table is a diverse concept. This can be a bedside container for newspapers and a tea mug, or a stand for a huge TV with built-in speakers and an electronic rotating system to attract the viewer's attention. Such a simple concept - and an endless number of execution options. Making a bedside table with your own hands is quite simple, but it is important to decide on the necessary design. My friend needed a kitchen cabinet with one top drawer. If you please.

Appearance of the manufactured bedside table

To make a bedside table you need

Here I give a list of tools that it would be better for everyone to keep in constant readiness, along with a fishing rod, favorite gun and chess:

• Drill-driver. A battery-powered one would be optimal if the household also has a hammer drill.
• Set of drills. In this case - on wood.
• Set of bits. If you want to assemble the furniture yourself, the kit should include a bit, which is a hexagon for confirmations.
• Hinge cutter 35 mm in diameter.
• Iron.
• Roulette.
• Pencil.
• A carpenter's tool called a "right angle", with a measuring ruler.
• Sandpaper, dry rag.

I’ll immediately note about the iron and other objects that were not clear at first. Since you will be forced to order cutting on the side (sheet laminated chipboard size 1830x2440 mm is the smallest), it makes sense to save on gluing the edges. Now on sale is a 0.5 mm thick melamine edge in the color of the material, which is easy to glue on yourself. Since it has an adhesive base, just attach it to the desired end with the beautiful side up and iron it with a heated iron. Using a dry cloth, press the still hot edge to achieve good adhesion. Excess edges are removed with a dull knife and the edges are processed with sandpaper.

Detailing the bedside table

A cabinet made with your own hands may differ in content, functionality and appearance. This largely depends on the amount you are willing to spend on fittings. Here I am writing details of the simplest and cheapest cabinet. Drawer without runners, facades - laminated chipboard.

• 772x500 – 2 pcs., sides of the cabinet.
• 368x500 – 2 pcs., bottom and shelf.
• 368x100 – 3 pcs., base and two upper strips.
• 480x110 – 2 pcs., drawer sides.
• 334x110 – 2 pcs., box front and back walls.
• 150x395 – drawer front.
• 515x395 – cabinet door.

All dimensions are for chipboard with a thickness of 16 mm.

We take a special kitchen tabletop, 28 mm thick. Its size is 525x400 mm.

Fiberboard for the back wall of the cabinet and the bottom of the drawer:

• 670x395 mm – rear wall.
• 475x365 mm – bottom of the box.

I have already written how to glue the edge, now it’s time to prepare the parts for assembly. The main fasteners for us are confirmations, for which we need to drill holes. We drill into the plane with a diameter of 8 mm, into the end of the parts - with a diameter of 5 mm. The figure shows which parts are drilled into the end and which into the plane - simply based on the general design of the cabinet.

Nightstand assembly diagram

List of required accessories

DIY bedside table is also ours business card in front of everyone who doubted our abilities, therefore even in inexpensive option fasteners must be taken as seriously as possible. We buy from a furniture fittings store:

• Confirmats 5x70 – 22 pieces. It is enough to screw the tie strips and the plinth one confirmat on each side.
• Self-tapping screws 4x30 – packaging. They will come in handy for other jobs around the house, but specifically here they are needed to screw the tabletop to the top slats, and the drawer front to the front wall of the drawer box. All this is screwed up from the inside.
• Self-tapping screws 4x16 – packaging. This is a fastener for hinges and hardboard (fibreboard). You should buy it with a hidden cap, and also deepen it into the bottom of the drawer so as not to scratch the shelf.
• Furniture hinges – 2 pcs. Since our cutter is 35 mm in diameter, we buy the corresponding hinges.
• Furniture handles – 2 pcs. For the front of the drawer, it is better to buy additional screws for handles, 35 mm long.

Assembly diagram of our cabinet drawer

Making a bedside table

It is better to coordinate the production of bedside tables of this model with friends or acquaintances - simply because chipboard sheet you can make two and a half of them. Assembly is so simple that you can start selling “extra” cabinets. To fully satisfy potential customers and your own, screw furniture legs, the so-called “hooves,” onto the bottom sides of the furniture. They will help you place the cabinet on uneven floor. Adjustable legs of this type can also be found in specialized stores that sell furniture fittings.

Ready bedside table

How to make a nightstand with your own hands general outline We already understand - it remains to take into account two very important technical points.

• Sampling for loops. One constant should be remembered: The distance from the edge of the facade to the center of the hinge hole is always 22 mm. Naturally, for loops with landing size at 35 mm. Above and below the door it is usually marked at 60-80 mm - this is not critical, if not design features. Then you can simply attach the facade with screwed hinges to the side panel on required height and attach to the body.
• Right angles. When assembling a drawer or cabinet box, always check the geometric correctness of the resulting parallelepiped. Otherwise, the product will turn out to be lopsided and with poorly opening facades.

That's all, good luck with your work.

A bedside table in the bedroom or a cabinet next to an armchair in the living room is an integral attribute of the interior of many apartments. Of course, now you can buy any cabinet in stores, but will it be unique? We present to your attention 10 unusual ideas how to make an original bedside table with your own hands from various items and materials.

1. DIY nightstand made from drawers

Place a wooden box for vegetables, fruits or postal parcels on legs or wheels. Attach a shelf inside the box. The box can be placed both horizontally and vertically, and you can also make a tall cabinet from two or more drawers.

The box can be decorated, for example, with branches. Read how to make such a bedside table with your own hands.

2. DIY nightstand with rope shelves

From the ordinary wooden box or boxes, as well as ropes, you can make a bedside table with a flexible design. You can customize your own shelves and different rope holders depending on the items and things that will be stored in the cabinet. To do this, you need to drill rows of holes in the side walls of the cabinet and even on top. Pull strong natural or synthetic rope through the holes and make different shelves and compartments for things.

3. DIY bedside table made from books

Unusual and original project bedside tables for the bedroom or living room. Secure stacks of books with straps, ties, or tie them with thick ribbons. In this case, place wooden modules, square or rectangular boxes between the stacks. It may even be dense carton boxes from shoes or small household appliances. Old books, vintage leather belts and wooden elements will give the bedside table a unique charm and style.

4. Nightstand from a chest

The chest has long been the main piece of furniture in huts and huts. Nowadays, antique or modern chests are a rare phenomenon in the interior. However, if you are the owner of your grandmother's old chest, then you can make a vintage nightstand out of it with your own hands. The spacious space under the lid of the chest will allow you to store many things, including bedding or toys in the children's room. In addition, designers offer exclusive options cabinets in the form of expensive leather chests. These ideas can be used as a basis and inspiration. Turning a chest into a nightstand lies only in the decor of the chest itself. It can be either updated or aged, left in natural form or color it.

5. Nightstands made from suitcases

Unlike antique chests, old suitcases are much easier to find. A DIY bedside table made from a vintage suitcase will decorate the interior of the room and also provide additional closed place for storing things. You can even hang a small combination lock on a suitcase bedside table and store intimate items there. To make a cabinet, you can either stack several suitcases on top of each other, or put one suitcase on legs, for example, on a stool or table.

6. DIY cabinet made from a barrel

A DIY bedside table made from a barrel will look very unusual in a bedroom or living room. Round wooden barrel- a ready-made cabinet. The main condition is that the barrel must be clean and free of foreign odors, such as wine. You can also cut a door into a barrel, put it on hinges, and attach a shelf inside. Another option is to make two bedside tables with your own hands from one barrel, simply by sawing the barrel into two even parts.

It can also be useful as a cabinet metal barrel, especially if it is old.

7. DIY bedside table made from a chair

Very often a chair serves as a bedside table. We propose to improve it by turning it into a real bedside table with a drawer. For this it is advisable to choose wooden chair without soft upholstery. Purchase special accessories for drawers and the box itself is the size of a chair. Attach the entire system under the seat. You can also nail another shelf under the box from a square sheet of chipboard.

8. Bedside table made of mirror and stool

If you have a stool as a bedside table, we suggest improving and decorating it. In the same way as with a chair, you can attach a drawer or shelf between the legs of the stool, and you can use a framed mirror as a tabletop.

9. Stepladder bedside table

A small ladder - a stepladder or ladder for cabinets - perfect solution for the bedside table. There is no need to do anything additional; if desired, paint or age the staircase.

10. DIY hanging bedside table

The nightstand, or rather, bedside table, can float in the air! How to make one like this unusual project for the bedroom - read.

A bedside table in a bedroom or any other room is a necessary attribute of furniture. You can purchase a ready-made cabinet along with a set of other furniture, but, as a rule, its cost is unreasonably high. To create an original, individual piece of furniture with minimal costs, you can test your strength in making a cabinet yourself. To have an idea of ​​how to make a bedside table with your own hands, you need to have information about necessary materials and tools, as well step by step execution works

When making a bedside table for the first time, you need to start with the simplest option. This is a universal wooden cabinet that is suitable for placement in a bedroom, office or living room. Other options, for example, a cabinet for a television system, will require more time and effort to manufacture.

Solid wood bedside tables can come in different sizes

Tools

To make a bedside table with your own hands you will need the following tools:

• jigsaw;
• miter saw;
• Sander;
• roulette;
• sandpaper;
• pencil;
• drill or screwdriver;
• Screwdriver Set.

Tools

In addition, you will need a cutter for hinges with a diameter of 35 mm, a set of bits with a hexagon for confirmations, the diameter of the holes for which must be at least 8 mm, if located at the end - 5 mm. You will need an iron to glue the edges on the end parts wooden parts. The edge can be purchased at any hardware store, matching the color of the lumber from which the cabinet is made. It has an adhesive side, which is applied to the end, and the top is ironed with a hot iron through a dry rag or any rag. Excess edges are removed with a knife.

In addition to the above tools, you will need a carpenter's “right angle” with a measuring ruler. To connect the shelves and side walls, you can use a special tool for installing dowel joints. This tool helps you drill holes in the side shelves using a drill using installed dowels. To do this, pre-drill holes in the ends and install dowels. On back side The shelves are marked so as not to confuse them during assembly. Then the shelves are applied to the fastening points, after which holes are made.

Materials

To understand how to make bedside tables with your own hands standard size, you need to know what you will need:

• 4 panels of chipboard or other material measuring 45x70 cm for the manufacture of top, bottom and side parts;
• 8 boards for making a frame measuring 7x40 cm;
• 4 panels of laminated chipboard or other material for making boxes measuring 17x43.5 cm.
• dowels 2x1.8 cm and screws 4x1.6 cm;
• if confirmats measuring 5x70 mm are used, they must be purchased in quantities of 22 pieces;
• wood glue;
• acrylic sealant;
• wood stain.

It’s worth preparing all the elements in advance

The choice of material for making a cabinet varies depending on the budget. Chipboard is considered the most cost-effective material.

At choosing chipboard As a material for making a bedside table, you need to pay attention to the degree of humidity, which can lead to warping finished product. The cabinet can also be made from natural wood, MDF, plywood or laminate. For the manufacture of dowels, skull bars, wooden guides, frame drawers, tabletops, it is recommended to use hard wood - oak, beech or birch. The thickness of the boards for making the frame ranges from 12 to 40 mm, depending on the functionality of the bedside table and its load. The back side of the structure is usually made of laminated chipboard with a thickness of 4-6 mm; if serious load is not expected on the bottom of the boxes, they can also be made of this material. To finish the material, you can use self-adhesive film in a color and texture that matches the rest of the furniture in the room, covered acrylic varnish. For natural wood stain or colorless impregnation is used.

If you make your own cabinet with drawers, you will need to purchase special fittings for them - guide mechanisms. As an alternative to guides, as they are more affordable, L-shaped wooden slats can be used, which are attached to the side walls of the bedside table from the inside in the places where the drawers will be.

If the cabinet is equipped with a door, it is necessary to prepare hinges for their fastening. To ensure that the door opens by pressing, elevator mechanisms are used. To prevent the door from opening spontaneously, you can equip the bedside table with a magnetic latch.

As supporting accessories, you can use stationary or height-adjustable legs, as well as wheels. Convenient are the wheels with a bearing mechanism that can rotate in different sides. Such fittings are useful for a bedside table in the living room. For doors and drawers, you also need to purchase opening handles. The number of handles, hinges, and guides depends on the number of drawers and doors.

Metal accessories necessary for making a bedside table with your own hands

Manufacturing stages

Before you make a cabinet, you need to decide on its shape and size. It can be a cabinet with a door, several drawers, an open shelf, or a combination type. Then you need to draw up drawings that will help you make accurate blanks.

Preparing parts

When the diagrams with exact dimensions are ready, you can begin producing blanks for the cabinet. First, a sketch of the cardboard blanks is applied to the wood, then the outline is cut out exactly with the marked dimensions. Inaccuracy in the dimensions of the cut elements can ruin the whole job. A jigsaw will ensure high-quality cutting of wooden parts. All parts are then sanded to ensure smooth edges. If the structure is not planned to be decorated self-adhesive film, at this stage it is worth treating all the details of the bedside table with stain.

After processing the cut parts, you can begin drilling holes for fasteners and accessories. When making a selection for hinges, it must be taken into account that the distance from the edge of the facade to the central part of the hole should be 22 mm. For hinges with a seat size of 35 mm, markings are made at the top and bottom of the door. To attach the shelf, you need to drive 4 dowels onto the sides of the cabinet (two on each side). Holes for dowels are made on the top, bottom of the wall and on the top end. If you are making a cabinet for a sink with your own hands, a hole of a suitable diameter is cut on the countertop where the sink will be fixed.

All necessary holes are prepared in the parts

Assembly

Before you make a cabinet with your own hands, you need to assemble it wooden frame: 7 cm wide slats are fastened together with screws or screws, forming a rectangular frame. The corners of the frame must be straight, this is checked using an appropriate measuring tool. Then it is attached to the rectangular frame top part bedside tables - table top. For reliability, the attachment points are additionally coated with wood glue. After assembling the upper part, the sidewalls are assembled, and lastly the back and front walls.

The guide strips are attached to the inside of the frame. The box assembly itself is carried out as follows:

• The completed blank for the box is placed on a flat surface, and holes for the confirmations are made using a confirmation drill;
• The body is twisted from blanks for the box. At this stage, it is important to check with a square that the angles of the structure are correct;
• the bottom of the box is assembled from fiberboard - placed on a frame made of planks, nailed with small 25 mm nails;
• Guides are attached to the lower corner joints.

The end of the main process of how to make a bedside table with your own hands is the attachment of handles, legs or wheels, as well as decorative design finished product.

We attach a bar to the side panel

All planks are attached at the same distance

A second side panel is installed on top

Ready frame

Top panel attachment

Preparing the peg

To install the pegs you will need wood glue

Installation of peg

Frame with top panel

Marking for guides

Fastening the guides

Adjusting the guides

Installation result

Drawer side panel

Drawer frame

Attach the bottom of the box

Nightstand without front panels

Machined bezels

Applying glue under the front panels

Decoration

A DIY bedside table can become an original decoration for a room. To do this, it can be issued in different styles. For example, create a bedside table classic style you can if you use paint pastel shades(yellow, sand, soft pink, light green). In this case, the ends of the cabinet are painted white, and individual elements, including the top and door, are colored. Wooden or plastic moldings need to be attached to the door, and a piece of glass or transparent plastic cut to its size on the tabletop. Moldings should be painted in a color that is different in tone from the color of the facade.

When decorating a bedside table, it is necessary to take into account the style and decoration of the entire room so that the product does not stand out from the overall design.

Instead of decorating the finished product, you can use original ideas making a bedside table from scrap materials:

• a bedside table made from old suitcases: for this you will need an old suitcase that is attached to a frame with legs. The outer casing can be painted or decorated using the decoupage technique.
• console from an old table - you will need an old one for this coffee table, from which half is sawn off. The second half is attached to the wall, painted bright color. In addition, you can use old box from desk, simply attaching it to the wall will create an unusual hanging cabinet.
• small wooden staircase, a barrel, a chair, a stack of books tied with a belt - all of this can be used as bedside tables.

Cabinet, i.e. tough robust design, capable of bearing loads as a single unit, is the main unit of cabinet furniture. Sometimes it transforms and hides, but it is always there. Incl. and in the form of an independent product - a bedside table - suitable for various applications in the house. In this form, it does not stand out in the interior, and in utility rooms its appearance can be whatever it came from, as long as it is durable. Therefore, it is from the bedside table that a novice amateur furniture maker needs to approach cabinets, beds, chests of drawers, furniture sets and walls.

The bedside table, with all the variety of design and construction, takes place, in general, in the following forms, see figure:

Bedside cabinet, pos. 1. Without painstaking finishing, it is unsightly, but durable, because... assembled on a frame. It allows, on the one hand, to do without cladding, which is important for balcony bedside tables, or to make it easily removable, which is no less important for a bathroom bedside table. On the other hand, you can put a durable tabletop on the frame, which will come in handy in a garage, shed or workshop.

Chest of drawers, pos. 2, lives mainly in kitchens, children's rooms and dressing rooms: you can put a lot of all sorts of things in it, and, after removing the drawers, it is easy to clean or repair. This is already a product of a panel structure with walls and shelves that make up a single power circuit. Regular sizes chest of drawers, see fig. on right.

Volumetric cabinets-racks, pos. 3, and cabinets, pos. 4, more suitable for the living room, bedroom, hallway, study or shared children's room. The design is also panel board.

Extremely simplified bedside table, pos. 5, It can be a bedside table, but most often it complements a coffee table in a soft corner of the living room.

Combination nightstands are more common for bedsides. For example, a product at pos. 6 below there is a cabinet, above it there is a chest of drawers with 1 drawer, and above there is a rack with 1 semi-closed and 1 open shelf. Due to their versatility, combined cabinets are the most commonly used.

How are cabinets made?

Factory-made bedside tables are assembled, as a rule, using furniture self-tapping screws and/or eccentric connectors. They are collected either in trade organizations before sale, or by home buyers themselves. Otherwise technological cycle the production of such a simple product as a bedside table will be unprofitable. But when making a cabinet for yourself, it is better to use more labor-intensive, but cheap, reliable and durable wood-to-wood connections; at least for the load-bearing parts.

To make a cabinet with your own hands, you need, firstly, to master 2 types of furniture joints: tongue-and-groove (mortise-tongue, tongue-and-groove joint) and dowel joints. For example, the frame of a cabinet, see fig. on the right, it is assembled from 4 lower drawers, 4 combat (vertical) drawers and also 4 upper drawers. The upper and lower tsars can be front/back and side, i.e. different.

The drawers forming the frame are connected by tongue-and-groove joints; the shelves are laid on support bars, also embedded in the combat drawers on tenons in the grooves. Properly executed with wedging, groove-tenon joints in such small item, like a bedside table, will not require the cost of glue.

The cabinets of the panel structure (all except item 1) are assembled on dowels with gluing. The supports for the shelves are also made with dowels. Only drawer guides are secured with metal hardware.

To make a drawer for a bedside table or cabinet, you will have to master a type of tongue-and-groove joint - a box joint. The general sequence of its working operations is shown in the figure:

Well, a more complete picture will be given by a selection of videos:

Video: box joint entirely by hand using a regular jigsaw

Video: Box connection using an electrified tool

Video: dovetail connection on a regular circular saw

The last video may be useful to those who, over time, having improved their carpentry skills, decide to work to order. Furniture assembled at dovetail, is highly valued by experts, but on condition: the tails must be self made, not milled on an automatic machine. And the method shown there gives tails that are neat, but completely artisanal in appearance. In addition, if you know how to connect parts using a dovetail, you can try yourself in an equally profitable field - restoring old furniture.

Straight tongue-and-groove joints are usually assembled using glue, but you can do it differently. To do this, vertical blind holes are drilled in the corners of the drawer box (4 at the top and 4 at the bottom, 8 in total) with a depth of 2-4 tenons and a diameter of 2.5-3 mm. Pins made of bamboo or beech are driven tightly into the holes. The box is nailed down after fitting the parts and finishing the assembly.

Bedside drawer

The structure of a furniture drawer is shown in Fig. on right. The bottom is made of plywood 3-5 mm thick, depending on the desired strength. Please note: the drawer front is not included in its power circuit, it is an overhead part. If you do it differently, pushing/pulling the drawer in will eventually warp or even fall apart. The drawers are made from boards with a thickness of 12 mm or plywood from 6 mm. The box is assembled using a box connection.

On cranial bars It is advisable to take a hard and durable tree: oak, birch. However, if you have a wood router, you can install the bottom easier and stronger: select a groove in the drawers below along the contour and insert the bottom into it during assembly. The distance of the lower edge of the groove from the bottom of the frame is from 3 mm for hard, fine-grained industrial wood and not less than the thickness of the drawer for solid softwood; groove depth - from 4 mm, but not more than 1/2 the thickness of the drawer.

The drawer fronts are internal, pos. And next. Fig., or external, pos. B. Internal facades more elegant, but require more precise fitting of parts. Mechanically, there is no significant difference between them.

Facades and homemade guides for furniture drawers

Wooden guides for drawers are made on the bottom rail, pos. 1, on the side rail, pos. 2, and on the fold of the quarter rail, pos. 3. Installing drawers on the bottom rail is technologically simple and provides an acceptable width of the drawer, but “eats up” a lot of space in height; The drawer on the bottom slats can jam when it is brand new and neatly made. In general, the worst way.

Fitting on the middle rail requires milling grooves in the side frames, but it provides the greatest width and depth of the drawers, because 3-4 mm of gaps both below and on the sides will be sufficient. If the slats are oak and the drawers are pine or plywood, then the drawers on the middle slats almost never jam when extended 2/3-3/4.

The quarter rail can be planed by hand with special planes: a zenzubel and a rebate, see figure, therefore, in the old days, placing handicraft furniture drawers in the quarter rebate was widespread. When pulled out no more than 2/3, the drawer slides in a quarter of the way almost without jamming, but a lot of space in the design of the cabinet is wasted.

About the full stem guides

If you decide to invest in modern full-extension slides for the drawers of your cabinet, then consider the following:

• Look first not at the brand, but at the complete fasteners. Responsible and conscientious manufacturers provide hardware with shaped heads, and a key to them, so that no one breaks in with a “homemade” one.
• The assembly instructions must contain the exact dimensions for the fasteners, Full description technical operations with drilling depth and requirements for the base (wood - what kind?, laminate, MDF).
• It is better to take inexpensive guides with propylene rollers. They run smoothly and are quiet, but are not as strong or durable as ballpoint ones. However, this is not important for a nightstand, unless you are storing gold bars in it.
• Full extension guides can be bottom or side. For a bedside table, the lower ones are better; the drawers can be made wider. Side guides require technical clearances on the sides of 30 mm, which, with an overall width of the cabinet of 400 mm, reduces the internal width of the drawer to 250-280 mm. And the bottom guides have enough side clearances of 6-16 mm.

What are the cabinets made of?

A wooden bedside table can be made from any wood suitable for furniture, e.g. the same as for a stool or table, as well as from plywood, laminate, MDF. The thickness of the boards is 12-40 mm, depending on the design. For dowels, skull blocks, wooden guides and drawers of the cabinet frame, it is still better to take solid, dense wood - oak, beech, birch; in the latter case also on the tabletop, because They work on such bedside tables and load them with weights.

The back side of panel cabinets is most often sheathed with thin, 4-6 mm, laminated chipboard, pinned furniture stapler. In cheap furniture, drawer bottoms are also made from laminated chipboard, but this is not necessary for yourself: it sags, crawls out of the grooves, or breaks off from the “shards.”

The doors of bedside tables are most often hung on hidden adjustable furniture hinges, but for them you need to select holes in boards from 20 mm thick with a milling cutter. If you put hidden hinges If there is no possibility or desire, then the doors are hung on piano hinges. Cabinet doors with card hinges soon warp due to the small size of the hinges and the shallow drilling depth for fasteners.

About finishing

A bedside table is not a significant piece of furniture, so there is no point in spending money on expensive decoration. When finished, planed and sanded to a smooth finish, the cabinet for the living room is best covered with self-adhesive wood-like material and coated twice with acrylic varnish. Then even an experienced cabinetmaker will not immediately distinguish it from the “real” one with veneer, and the film under the acrylic in direct light will last at least 10 years.

Where's the nightstand?

Hallway

This is the first room where a homemade cabinet, as they say, is just asking for it. They don’t pay much attention to the furniture in the hallway, but a shoe cabinet is very necessary here: an average family of 4 people now has about 20 pairs of shoes, see fig. The old Soviet shoe rack is no longer enough here.

Shoe cabinets are available for sale in a wide range, but the prices encourage non-standardization, and looking at the hinge designs, it seems that they were copied from the reversal units solar panels spacecraft. Meanwhile, a shoe cabinet can be made much simpler and no worse: on the left in Fig. Below see the drawing, and on the right there is the design of the bedside table-pouf for it, in which accessories for shoe care are stored.

There is not enough shoe storage in the hallway; you also need a bedside table for gloves, hats, handbags, etc. little things. It should be higher than usual so that you can look in the mirror while standing. Dimensions and general form bedside tables in the hallway general purpose see fig. on the right, but it’s better to make it not on legs, but on a skirt made of 20-30 mm boards, so that debris does not accumulate under it.

Bedroom

Choosing a bedside table bedroom set determined by the habits and character of the owner. Regular bedside table, pos. 1 and 2 on the next. rice. combined: top open shelf for alarm clock, phone, glasses; the middle one is for reading at night, and in closed compartments anything is stored: from books “for later” and the next change of bed linen to intimate accessories for lovers of “strawberries and cream”.

Lovers of long and meaningful reading before bed prefer cabinets, racks, pos. 3. This habit, by the way, greatly develops mental abilities and helps maintain clarity of thought until old age: what you read before bedtime, unless it is meaningless reading, is absorbed by the brain especially deeply and clearly during sleep.

Shelves and racks appeal to fans of sophisticated design, pos. 4, but the sophistication of a bedside table can also be functional. How do you like the bedside table, pos. 5? Half a table transformation mechanism and a little imagination.

In general, the bedside table is a grateful object for creative ingenuity. To begin with, we give diagrams of two, see Fig. In the bedside table on the left, additional linings are used on the facades, which allows by simple means get elegant design. And the bedside table on the right consists of only 4 simple-shaped parts.

Balcony

The glazed balcony is a utility room, narrow, with an unstable microclimate. Therefore, the bedside table for the balcony is made on a frame, see fig. This allows, firstly, to do without covering the cabinet and install it without gaps in which condensation will accumulate. Secondly, the increased strength of the cabinet will allow you to work on it or, say, move a refrigerator to the balcony, which will provide great energy savings. And so that small objects do not get lost, the tabletop is upholstered along the contour with a furniture fillet or plinth.

Living room

Side table in the living room, except for the coffee table, pos. 1 in Fig., according to modern and well-founded trends in interior design, is made long and low. The design is chosen based on the design style of the room, pos. 2-4. But the TV stand with the same general design must meet specific requirements.

Side tables for the living room

Efficiency speaker systems(AS) is related to the wavelength of sound, which in the bass (LF, low frequencies) is meters and tens of meters. Speaker designers are trying in every possible way to circumvent these restrictions, and they are not short of success. But still, the size and volume of modern flat-panel TVs do not allow them to be equipped with built-in acoustics that satisfactorily reproduce low frequencies. And here a TV stand can come to the rescue: it will “catch” the low-frequency vibrations of the TV and transmit them into the air, adding richness to the sound. Only if the TV is not the “bubble” of previous generations: a heavy tube suspended in it will extinguish them.

The TV stand must, firstly, have an open resonator tuned to approximately 80-100 Hz. A niche for a player measuring about 800x400x200 mm is just right. Secondly, you can also add “juice” to the sound if the TV is powered by small-sized external speakers, placing them in niches with a volume of 20 liters or more with a gap of 4-8 cm on the sides and top; effect of “saturation” of sound from speakers closed type in niches is well known to music lovers. The “ideal” design of a TV stand is shown in Fig. on the right, and drawings of 2 suitable ones, for external acoustics and without it, in Fig. below.

But that is not all. The bedside table box, its back wall and the bottoms of the resonating cavities must be made of boards from 30 mm, and intermediate parts from boards from 20 mm. And that's not all: the material (spruce, pine, larch, hemlock, laminate, MDF) must have its own mechanical quality factor in the range of 0.7-1.2. However, there is no need to look for a sound measuring laboratory; just tap the workpieces with your knuckles: the sound should be clear, but short and dry, without ringing. A “cotton” board will absorb any vibrations, while a ringing board will “catch” unnecessary ones, which will give unpleasant overtones. And that’s all for sure, the glue on which the cabinet is assembled should produce a seam that retains its plasticity for years; PVA is best.

Bathroom

Some general sizes Bathroom cabinets cannot be provided, because... it will contain a sink with a siphon, of which there are countless different ones on the market, and the discharge into the sewer bed can be arranged in any way. But general principles The design of bedside tables for wet rooms is quite clear:

1. The bathroom cabinet must be raised above the floor, otherwise unsanitary conditions are inevitable, on the left in Fig.
2. Therefore, it is attached to the wall, right there.
3. Fastenings to provide access to plumbing fixtures must be detachable: stainless steel (worse - bronze or galvanized) self-tapping screws in propylene dowels. Metal in metal, e.g. Stainless steel bolts and the same collets will become so stuck that the cabinet will have to be broken.
4. The vanity cabinet is made from rot-resistant wood: oak, resinous pine, larch.
5. After the initial dry assembly and fitting of the parts, they are individually treated with an antiseptic for wood, and after 3-7 days with a water repellent, i.e. water repellent. If an inexpensive (but very good) water-polymer emulsion is used, then the treatment is carried out twice with a break of 1-3 days.

Under the aquarium

Aquarium keeping is a very useful activity in all respects. But the aquarium is subject to the square-cube law almost in pure form: as the size of the aquarium tank increases, its volume and weight grow faster than the size of the supporting area, i.e. the load from the aquarium per unit area of ​​the load-bearing surface increases. It is believed that the weight of an aquarium with soil, population and equipment in kg is equal to approximately 1.5 of the volume of water in it in liters. It follows that the cabinet for the aquarium must satisfy the following conditions:

• An aquarium up to approximately 100 liters can be placed on any cabinet of suitable size, because... ordinary furniture is designed for a load of 150 kgf.
• For a tank up to about 150 liters you need a reinforced cabinet; preferably frame. The combat drawers are made from timber from 60x60 mm; horizontal – from 100x50 mm. The installation step of the combat side frames is no more than 400 mm; their height is up to 650 mm. The tabletop is solid laminate from 32 mm.
• At the aquariums larger capacity the pressure on the support exceeds building code at 250 kg/sq. m, so stands for them are calculated individually based on the size of the tank and the design parameters of the building; The aquarium stand is usually mechanically connected to the building structure. IN apartment building project large aquarium must be tested/developed in a specialized organization and approved by the building operator.

About corner cabinets

The bedside table is essentially a subordinate element of the interior, so the corner tables in living rooms not in use: what’s on the corner is always in plain sight. There is simply no room for one in a regular bathroom or kitchen, but corner cabinet It might come in handy in the narrow space behind the door for all sorts of little things, which are equally inconvenient to hide far away and keep in sight. Let's say, for not the most favorite toys, knitting/weaving, which is taken up as free time is available, etc. In such a case - in Fig. On the left is a diagram of a corner cabinet-rack. The dimensions in the plan can be changed to suit your apartment.

Just in case

All this is good, the reader may say, but what if the bedside table is needed “for the day before yesterday”? Not luxurious, but made from waste material, so it could be made in half a day and would last for 5-7 years? Let's say, to the country house, to the garage, to the barn?

Please. In Fig. shows how to make a durable and comfortable bedside table from a pallet left over from a construction site or other unnecessary boards. It's so easy to do that no explanation is required. But making one will give you a sense of the material and design, which will then allow you to start working on products that are quite aesthetic and even exclusive.

Compact and almost invisible, the bedside table plays a very important role. It is convenient to place a lamp on it for reading or knitting before bed, put your phone and set an alarm clock. Inside small drawers and open niches it is convenient to store all the little things for a comfortable stay: favorite books and glasses, charging device for laptop and tablet, care and hygiene items. Do bedside table It won’t be difficult to do it yourself. As a rule, such furnishings are endowed simplest design and not difficult to assemble.

Ideas on how and from what you can make a bedside table yourself

Purchasing separate materials to make a bedside table with your own hands is unlikely to be a good idea. The cost for it is small. Therefore, they usually “figure out” from the leftovers.

There are incredibly many design options for bedside tables:

• It can be an open console design, a lightweight shelving unit or a full-fledged chest of drawers.
• Be made from leftover laminate, plywood, pallets, timber, MDF, solid wood and, of course, laminated chipboard.

You can endlessly sort through models and photos of different ideas. Both by modular collections of bedrooms from famous manufacturers, and simply by searching using Google and Yandex images.

But in the end, execution will depend only on the desire to do something and the remaining materials available.

An example of how you can make a bedside table with your own hands, drawings and diagrams

Let's look at a typical model of do-it-yourself bedside furniture. Drawing and diagram with instructions overall dimensions will look like this.

Making a bedside table from laminated chipboard of this type is not profitable separately. It’s more economical to make two of them at once or, for example, together with . It will cost much less than if you buy it ready-made.

The model is easy to assemble and can easily be made by a beginner. In fact, you will need to assemble the cabinet body itself and the drawer frame. After pre-drilling several holes for confirmations.

DIY bedside table, calculation of details and cutting map

The details indicating the sides for edging are most clearly written out in an Excel table. In fact, three types will be used sheet materials– laminated chipboard, fiberboard and MDF for the drawer facade. However, in order to save money, it can also be made from laminated chipboard.

If you lay out the details of the bedside table on a whole sheet, you can see that not much material will be left.

That is why I wrote above that making one copy is extremely unprofitable if there are no leftovers. After all, you will have to buy a whole sheet of chipboard.

Drilling parts and assembling the bedside table

After the parts have been sawed, all visible ends are covered with an edge, you can proceed to next stage. Drill the blanks for assembly onto the confirmations.

I wrote in more detail about the nuances of drilling and subsequent assembly in the article on manufacturing. In fact, the products are similar in design. Therefore, I will not repeat myself. I will give only an additional drawing of a bedside table in three dimensions.

What you need to make your own bedside table

In fact, it all depends on which stages of work you do yourself and which you delegate to the relevant companies.

For example, cutting and edging of parts can be ordered in the same place where laminated chipboard is purchased. Or you can do it yourself. In this case, you will need a jigsaw for cutting, a grinder for smoothing the ends for gluing the edges, and an iron. As well as small improvised items:

• tape measure, pencil/marker square for measuring workpieces and drawing parts;
• sandpaper, shoemaker's and stationery knife for cutting and sanding the edges after gluing the melamine edge with an iron.

For assembly you will need Phillips and hex screwdrivers (it’s convenient to use a ratchet) and a screwdriver.

In addition to the tools and improvised means, which in principle any craftsman has in stock, you will need to purchase fittings and components for assembly. All this is presented in tabular form of the estimate.

Just create a similar Excel form for yourself, enter formulas and prices to calculate the final figure for upcoming expenses. I am sure that if you make a bedside table complete with a more significant item and put the details on the rest, the savings will be significant and will completely satisfy you. Good luck!