DIY laundry storage box. A DIY underwear organizer is a convenient device for storing underwear and handkerchiefs! What you need to make your own from fabric

Where do you store underwear and various small items (socks, handkerchiefs, etc.)? In plastic bags or in crumbling piles of laundry on a shelf? We offer you more modern way- store accessories in convenient organizers. Such useful things can be bought either in a store or made yourself at home from scrap materials.

Having made such an organizer once, you want to store everything in such boxes in the future. Then it’s not even a matter of beauty, but of practicality and convenience.

So, to make an organizer you need the bare minimum:

A box (you can take it from the supermarket, or you can use it as a shoe box).

Fabric (size depends on box).

PVA glue and small moment glue.

Stapler.

Thick white cardboard.

Masking tape (may not be useful).

Pencil, ruler.

You can use something of your own for decoration. Used here:

Wide satin ribbon.

Openwork ribbon.

How to make a beautiful organizer out of a box with your own hands

First of all, it’s better to glue the box masking tape, so that it does not fall apart and is stronger.

Then we start making the insides. To do this, we need cardboard, folding it in half, we will get strips of the required length, their width should not exceed the height of the box. If, on the contrary, the box is very deep, it needs to be cut to the desired height.

The length and number of strips are determined based on the width and length of the box. The cell size should end up being approximately 5x5. The following figure is provided as an example.

Now these strips need to be cut correctly. Since their width is 11 cm, the cut should be 5.5 cm in both places. We make cuts every 5 cm, on the side where the cardboard is glued, i.e. not where the fold is. Let's cut it like this:

Now we connect everything together to form a structure.

Here the top is pre-glued with a satin ribbon to make the box look more beautiful from above. The structure is ready. Let's move on to the design of the box itself.

We cover the box with fabric, and in this case the fabric is simply secured with masking tape at the bottom of the box and at the bottom of the box.

We cover the gluing areas with a white sheet of cardboard, or something else at our discretion.

Now we install the structure inside the box. In this case, there are 5 cm cells and two larger compartments.

After installation, the box can be decorated in any way, in this case, it’s just a satin ribbon and an openwork ribbon. We glue the tape with instant glue, and attach the ribbon to the stapler. The result is as follows:

Those who madly love order in everything, including in the linen drawer of their closet, simply cannot do without a linen organizer in which each item occupies strictly its own cell. In the master class we will show one of the options on how to sew a laundry organizer with your own hands.

The first thing we do is take measurements from the drawer in which the underwear will be stored to create an organizer pattern. We got the box dimensions 75 cm long, 43 cm wide and 13 cm high.

In order to sew a laundry organizer, we need this:

blue thick fabric;
more thin cloth variegated colors;
padding polyester;
white wide braid for edges.

Now let's start sewing a laundry organizer.

From padding polyester and blue thick fabric, cut out two rectangles, slightly smaller in size than the dimensions of the box. We made a cut 74 cm long and 42 cm wide so that the organizer would not deform.

We sew long rectangles of two colors onto a padding polyester rectangle. The length of the rectangles should be equal to the base, and the width should be double the height of the box. These will be the longitudinal partitions of the laundry organizer.

We sew the rectangles in the middle, then fold them together so that the seam is on the inside, and we get a double partition

We decide on the length and number of cells of the laundry organizer, and draw out the blank.

When attaching large rectangular partitions, leave the edges unstitched by 1 - 1.5 cm, we will need this later.

Now let's move on to the small partitions. Let's calculate their dimensions - we make the width with a margin in the form of seam allowances, but on the contrary, we make the height a little smaller.

To make the partitions stable, we will make them from double fabric. So, we sew all the partitions and turn them right side out.

It's time to painstaking work- we sew each small partition in turn on one side and the other. We recommend doing this manually.

Now let's get back to the unstitched edges of the long partitions. We sew the two halves together, steam them, hide the seam inside and stitch again

The top of the short and long partitions will be edged with a wide white braid.

Now we can sew the main rectangular walls around the perimeter of the future organizer.

12. Next, we will sew the edges of the long partitions to the side walls; it is advisable to do this by hand - it will be both neater and easier.

13. Let's work on the outer corners of the laundry organizer. Let's align them in height, cut off any protruding fabric, if any, and trim the corner with white ribbon. We'll do the same with the other three corners.

14. And now, finally, let's return to the large blue rectangle that was cut out and set aside at the very beginning. This blank will be the bottom of our laundry organizer. We carefully attach it to the padding polyester along the perimeter of the future product. You can sew any of the seams; we used a zigzag so that the threads from the cuts would not interfere with further work.

Well, to finish, we’ll finish the edges of the finished bottom with white braid. First sew the braid with a basting stitch or pin it so that it is evenly positioned, Special attention We pay attention to the corners - they are the most difficult to work with. After making sure that the braid is located nicely and evenly, we attach it with a machine.

04/17/2019 2 1,894 views

How to create an organizer for underwear with your own hands? Step-by-step instructions will help you make a small storage unit even from ordinary materials that you often have on hand. This is great, because you never want to spend money on purchased containers.

After reading this text, you will learn how you can make a container for storing laundry from ordinary milk cartons or wide fabric strips.

Necessary materials

The step-by-step instructions for sewing an organizer are quite simple, no matter what material you choose to create a laundry container. But to successfully create an organizer with your own hands, you need to prepare some materials in advance. First, let's decide what you want to construct your organizer from: cardboard or fabric.

Cardboard is usually placed in a closet or chest of drawers. Therefore, in addition to the future storage space for the container, you need to take care of the timely acquisition of a ruler, a simple pencil or a marker, cardboard (you can immediately cut out the shape according to the width and length of the box), a stationery knife or small scissors.

A large piece of fabric in a color that will fit into your interior or is simply pleasing to the eye, scissors, strong thread, tailor’s pins and needles will help you sew a laundry organizer with your own hands from fabric. You may also need tailor's lined paper, since it is quite difficult to design a laundry organizer without a diagram.

How to make an organizer for underwear from cardboard with your own hands?

This option will be cheap, but its manufacture requires a good eye. But you need to start by finding a sheet of cardboard.

First you need to measure the width, height and length of the laundry storage box. Next, you need to calculate the number of strips needed.

In order not to spoil anything, you need to be safe. And an ordinary pattern on lined or sewing paper can help with this.

All strips must have the same width and height. Only then will you be able to properly plan the creation of a laundry organizer and (no less important) successfully install it in the drawer.

Next you should mark the cut lines. On long strips, you need to make three cuts half the width of the strip, and on short ones, two are enough. In what main feature? The width should be equal to the thickness of the partition.

The cuts must be made as carefully as possible. It’s better to make a smaller cut and enlarge it if necessary than to ruin the part. To strengthen the partitions, you can cover them with varnish or tape.

The last step is to connect the parts and place them directly in the chest of drawers for storing underwear.

Take the measurements of the box in which the laundry container will be stored responsibly. Otherwise, there is a risk that the product simply will not fit into it. Just in case, you should leave two centimeters in reserve.

Making an organizer from cardboard may require some financial investment. To minimize the cost of an organizer, you can use simple packages from under the milk.

Alternative way Making storage for underwear from cardboard with your own hands can be considered creating an organizer from milk or kefir bags. Free people appear at home at least once every two days.
Of course, you need to treat the boxes before putting laundry in them. Start by cutting the tops off so that they all fit into the box. Then, using soap, wash the inside of the bags.
Fasten the bags together using a stapler or strong glue, using the “Moment” type. On top, to add aesthetic value, you can coat the product with aerosol colored paint. All that remains is to put it in the box.

How to sew an organizer from fabric?

The advantage of making an organizer from fabric is that this option will last longer. In addition, the fabric will not be damaged if you accidentally spill some liquid cosmetics on it.

If you are not enthusiastic about using cardboard or want to create a homemade travel organizer, consumables fabric should come out - a tape 12 millimeters wide, cardboard for the base.

First of all, you need to draw a drawing of a laundry organizer on paper, and then transfer it to cardboard. Consider the dimensions of the box in which you plan to place the resulting product.

The following cutting is considered standard: five strips of 18, 36, 45, 54 and 27 centimeters, respectively (remember the allowance of two centimeters for stitching), twelve internal walls of nine centimeters and two pieces of eight, external parts of the walls of 4 strips of 36 centimeters with allowances and a bottom format of 36 by 36 centimeters. It will turn out to be fabric if you sew all the specified details correctly.

Fold the partitions in half and sew the top edge. Then you should sew all the strips in accordance with the markings (according to it, the first three rows include four small compartments, and the last - four large ones).

The partitions need to be sewn in such a way that there is a margin of 50 millimeters above and below the edge of the fabric strips. This will allow you to then sew the bottom to the bottom (you can sew it with a zipper to make it easier to fold the storage.
Next, you need to strengthen the walls with cardboard (just insert it into the double-leaf walls) and cover the edges with tape. In this case, you won’t have to worry about the strength of the organizer and install it in your chest of drawers.

Video: how to make an organizer for underwear with your own hands?

A cluttered closet negatively affects everyone. Necessary things get lost, searching for them takes time and makes you nervous. Cannot be found required item, your mood deteriorates, this affects your work and relationships with people. In such a situation, an organizer will help. For storing any small items, an organizer is the best solution.

Previously, women's underwear was of a respectable size, it was easy to store it in the closet and it was difficult not to notice it there. Now the underwear is miniature, in the chest of drawers, no matter how you fold it, it gets mixed up, the hooks cling to each other, the straps intertwine. That's why we came up with laundry organizers. Don't buy them from the store; they are expensive and may not be the right size for your cabinets. We recommend making an organizer for underwear with your own hands.

Cardboard box organizer

How to make an organizer? Classic version DIY organizer made from cardboard box.

Step-by-step instruction.

For this you will need:

cardboard box;
ruler;
pen;
glue;
scissors;
paper or fabric for pasting.

First you need measure your dresser drawers. Then choose the appropriate box a little smaller internal dimensions drawer so that the box fits easily and does not break. If you don’t find the box you need, then it’s easy to make it from large pieces of cardboard. You can ask for a box at any nearby store. Pay attention to the quality of the cardboard so that it is dense but cuts well.

When the box is selected and easily fits in the box, you need to cover it with cloth or paper. The fabric is more durable and the organizer will last a long time. We glue the box on all sides. It is advisable to choose fabric or paper of light colors, but not easily stained.

Next step: think about what things you will store here, what size cells you need to make for them and how many of them you will get in this box.

Mark the box. Try on what size partitions you need; their height should be 1 cm below the box. Cover them with the same cloth or paper. Make slits in the transverse partitions, leaving 1-1.5 cm to the end of the strip. Assemble the inside of the organizer. First, install the longitudinal partitions and glue them to the base of the box, put the transverse partitions on them.

Insert the organizer into place, lay out your underwear. Place one item in each cell. Place the cups of the bras one inside the other, place the straps inside, place the bra on the edge. Roll panties and socks into neat rolls and insert them into the cell.

Now in a matter of seconds you will find your item. To store bodysuits and T-shirts, you need to make another organizer with large cells.

Fabric organizer

Anyone who knows how and loves to sew can make an organizer out of fabric.

You will need:

thick colored fabric;
padding polyester;
threads, scissors;
centimeter.

Cut two rectangles from thick fabric slightly smaller than the bottom of the box and one rectangle of padding polyester. This will be the bottom. Now, in accordance with its dimensions, cut out the side panels from fabric and padding polyester. Cut the fabric to such a height that you can fold it in half, insert the filling inside and you will get double sides. We also sew long longitudinal partitions. First, fold the cut out rectangles front side inside, stitch along the sides, insert the filler, turn it inside out, stitch around the perimeter.

Then we measure what size the small transverse partitions will be and sew them according to the same principle. The edges of all partitions must be edged with braid.

We sew the bottom on three sides, turn it inside out, insert the filler, stitch around the perimeter. We sew on the sides, then the longitudinal partitions, using your hands. We sew small transverse partitions by hand between the longitudinal partitions. We hand-edge the corners and outer edges with braid.

Fabric hanging organizer

To unload drawers in a closet, can be done hanging organizer from fabric. You need to take colored thick fabric of any size. Mark on it where the pockets will be. Then, along the marked lines, sew strips of 12-15 cm onto it.

Before sewing on the stripes, edge the top edge with braid or contrasting fabric. We sew the strips onto the fabric on three sides, leaving the top edged edge free. Sew the strips crosswise to create pockets. Cover the entire product with braid, throw the top edge over a regular clothes hanger and stitch.

Now you can hang it inside the closet next to your clothes. This organizer can be used in the hallway to store small items: mittens, ribbons, comb. Can be hung on the bathroom wall to store tubes of creams, pastes, and body care products.

Advice. If you plan to use it in the bathroom, then it is better to make it from transparent waterproof materials.

A hanging organizer is also needed in the kitchen. You can only change the size of the pockets according to the size of your kitchen utensils.

Ways to create organizers without boxes

The organizer for underwear looks impressive in the form of hexagons - honeycombs. To do this, you need to cut out as many hexagons from thick cardboard as will fit on the bottom of the chest of drawers. Then cut strips of cardboard twice as high as the sides of the box. Fold the strips in half. If the double strip is higher than the sides, then the excess must be cut off. Place hexagons on the bottom of the box. Lay the strips around them, fixing them with glue to form hexagonal cells similar to honeycombs.

There are other options for organizers in the chest of drawers. As cells, you can use identical empty plastic jars, which can be glued to a cardboard base so that the jars do not move, and place the entire structure in a box.

How to make an organizer for absent-minded people. People often leave the house in a hurry and then remember that they forgot to take important and necessary little things. We have to go back. In such a situation, an organizer that can be hung on a handle will help. front door. Keys, glasses, business cards are placed in his pockets. Walking past the front door and holding its handle, no one will forget these little things when they see them in their pocket.

Instructions:

You need - thick fabric, braid, bias tape, plastic folder.
Product size 13x25 cm.
Cut out two parts.
We make pockets, cut out two rectangles and fold them in half, it turns out to be 13x10 cm. We sew them, turn them inside out.
The second pocket is 13x18 cm, we sew it in the same way.
We make a back pocket 12x28 cm, fold it in half and sew it too.
We assemble the organizer and put a plastic base inside so that it does not lose its shape.
We sew all the parts together with the braid to make a loop, and hang our product on the handle of the front door.
We process the edges around the perimeter with bias tape.

When preparing to leave, we put all the little things in our pockets in advance; when we leave, we will no longer be able to forget them when we take hold of the door handle.

To maintain a good, friendly mood in the family great value It has order in the house, in the closet, in all rooms. A little ingenuity, imagination, time and order will be restored, thanks to such a little thing as a DIY organizer out of the box.

Let's not leave chaos a chance!

Video

Watch a tutorial on making an underwear organizer from a cardboard shoe box.

We will need thick fabric (I had “teak” lying in my chest for about 20 years), 12 mm wide tape and thick cardboard, scissors (). We will make an organizer 36x36cm and 8 cm high. First of all, let's draw it, I decided to make 8 cells 9x9 and 4 cells 9x18. After everything is drawn, we begin to calculate how long we need to cut the strips for the internal partitions.

The first strip consists of 1 horizontal and 1 vertical partition of 9 cm each, which means it is equal to 18 cm plus allowances on both sides. How to calculate the rest is shown in the figure. We cut the strips 14 cm wide so that when folded they are 1 cm smaller than the main width of the organizer. Using a marker () we immediately make markings along which we will sew them together.
So, we need to cut:

Now we sew them according to the markings

We sew parts of the inner walls between the partitions, so that there is 0.5 cm from the top and bottom from the edge of the partition to the edge of the wall.