It so happened that in different rooms we have different laminate. After several years of use, I began to notice that with the same care, the laminate floor in one room looks like new, but in another it is clearly worn out. Obviously, it's a matter of quality of coverage. But not only.

Which laminate can be washed?

If you know how, you can wash any type flooring. But some people can only withstand the touch of a well-wrung out rag, while others don’t even care about a floor steam cleaner.

You should think about care even at the time of purchasing laminate, choosing it according to the degree of moisture resistance and installation method:

1. Moisture resistance. The higher the class of the laminate, the higher its resistance to moisture, abrasion and other influences. When purchasing, you need to pay attention to the markings on the packaging. U different manufacturers They may differ, so if in doubt, it is better to contact the seller to decipher the icons.

Moisture resistance is most often indicated by three drops or a faucet with a drop. And also the inscription “Aqua Resist” or “Aqua-Protect”. As a rule, the price of such coatings is higher. But they can be laid in the kitchen and even in the bathroom.

1. Laying method. When laying “seam to seam” or with glue, there are gaps between the panels that water will get into when you wash the floors. Much more reliable lock connection, especially if the locks are waxed.

Of course, we did not save any packaging, so now we cannot find out the properties of our laminate. We only remember that they took very a budget option on sale. So he turned out to be very capricious.

In such cases, in order to understand whether laminate flooring can be washed with water, I can advise you to conduct an experiment. If there is a cutting, moisten it generously and look at the changes after some time. If there are no scraps left, wet the floor in an inconspicuous place. For example, under the bed.

If the material swells or becomes deformed, it means that it cannot be washed; you can only wipe it with a well-wrung out cloth. And even more so, you should not use a washing vacuum cleaner or steam cleaner for laminate flooring.

How and with what to wash laminate flooring?

Even if you are confident in the moisture resistance of your coating and its high-quality assembly, questions about care still remain. After all, whatever one may say, this material is made from wood, which requires a special approach.

Therefore, it is worth considering whether it is possible to wash laminate flooring with a steam cleaner or a washing vacuum cleaner, whether it is possible to use cleaning products and what is better - a rag or a mop?

Let's figure it out. But first, a few words about what should precede wet cleaning.

Before you wash...

The laminated flooring protects this flooring from moisture. upper layer. If it is damaged - scratched or worn out - the degree of protection drops.

And it can be scratched not only by chair legs or heels, but also by sand brought in from shoes from the street, dried bread crumbs and other debris. If you don’t remove it and immediately start rubbing the floor with a rag, it will work like sandpaper.

Therefore, no matter what you choose for wet cleaning, you need to do dry cleaning first. The instructions recommend using either a regular broom or a vacuum cleaner with a soft brush to remove dust and abrasive particles from the surface.

How to wash laminate flooring - with a rag or a mop?

Mop or rag - no difference. The main thing is that there is not a lot of water left on the floor. Therefore, when choosing which rag is best to wash laminate flooring or which mop attachment to use, you need to give preference to those materials that absorb water well and are wrung out. It can be microfiber, sponge, or ordinary household fabric.

You can wash it with plain water or add products to it that make the coating shine. And some also create on it protective film.

1. Preparing the solution. The detergent is added to the water according to the instructions. As a rule, the cap plays the role of a measuring cup.
2. Wet the rag. After wetting it, you need to squeeze it out well.
3. Wipe. Do not wash with a wet cloth, but rather wipe with a damp cloth. This is quite enough to remove dirt from a smooth surface.

1. Wash off clean water . The technology is the same, we just wet the rag in clean water, changing it more often. Here's a note: if you used special products for shine and the formation of a protective film, they cannot be washed off. This is done only when using detergent compounds that leave whitish stains on the floor after drying. Therefore, we always read the instructions carefully.

It is worth paying attention to detergents.

Many manufacturers of floor coverings produce related products. Including special chemistry, and even care tools. These include such well-known companies as Egger, Tarkett, Quick-Step, EPI, Parafloor, Alloc, Pergo.

They can be bought in specialized stores and used for their intended purpose without fear of damaging the coating.

There are also non-branded detergents on sale that are designed specifically for laminate floor care. Among them:

• Emsal Laminate. Production - Germany. A soap-based liquid that removes fresh and old dirt, adds shine to floors and creates temporary protection against dirt.
• Mellerud. An effective Swedish product for removing dirt and grease, as well as many other types of dirt.
• Mister proper. Thanks to advertising, it is known even to those who have never washed their floors and have no intention of doing so. But the product is really good, suitable for different coatings, leaves no traces at all.

They are also not capable of harming the floors in any way, if you strictly follow the recommendations for use. But cheap compounds of unknown origin or other purpose (for example, dishwashing liquids or washing powders) are capable. And if you decide to use them, test them first on an inconspicuous area of ​​the floor.

But it's better not to take risks. If you don’t have special equipment on hand, you can use regular table vinegar instead - one tablespoon per half bucket of water. This solution will clean well and add shine.

Use of special equipment

To answer the question whether laminate flooring can be washed with a steam mop or steam cleaner, you need to know everything about the quality of the coating. If it is not moisture resistant and is laid without sealing the joints - definitely not.

But even the most high-quality laminate flooring with waxed locks must be cleaned with these devices with certain precautions. Because hot steam supplied under pressure can harm it too. I would recommend listening to the following advice:

• Instead of the napkin included with the steam cleaner, use an old terry towel folded in half;
• Do not supply steam continuously. And if it is possible to adjust the supply power, choose the minimum;
• Try not to use steam generators too often.

If you have a choice: a washing vacuum cleaner or a steam cleaner, then it is better to give preference to a vacuum cleaner. But only one that has good suction power and immediately removes splashed liquid, preventing it from affecting the surface.

In the instructions for such devices, manufacturers usually indicate the scope of application. If in doubt, I can again advise own test on a separate panel or in an inconspicuous place.

By the way, my cheap laminate I began to lose my appearance just after purchasing a Karcher steam cleaner. But it did not harm the coating in the other room at all.

So again we return to the fact that the cleaning method must be chosen taking into account the type and quality of the laminate.

How to remove stains?

It is not difficult to clean the floor from ordinary household dirt. But what to do when stains are found, what cleaning products can be used? It depends on the type of pollution:

• Traces from a marker, felt-tip pen, or nail polish can be removed with acetone, white spirit, or alcohol-based window cleaner. The product is applied to the stain with a swab and immediately washed with a soft, light cloth.

• Black shoe marks can be erased with a school eraser or washed with a baking soda solution.
• Hardened wax, fat or chewing gum is carefully scraped off with a spatula. Before doing this, you can put a bag of ice on them. If during the cleaning process it was not possible to avoid scratches, they should be covered with a special putty or wax for parquet, matched to the tone.

• Blood stains are also best removed with window cleaning spray. After spraying, blood stains should be wiped off with a soft cloth.

But what is better not to use in such cases are ammonia-containing compounds. They may be able to deal with stains, but they will also dissolve the protective film.

Well, and most importantly: if you spill something on the floor, be it water, tea, juice, wine or other liquid, you need to immediately wipe it up before it penetrates into the joints.

Conclusion

As you can see, there is nothing complicated in caring for laminate flooring. You just need to take into account its features and try not to get the coating too wet if it is not moisture resistant. It is best to use a rag or mop and by special means. And if the floor material is wear-resistant and laid in a locking manner, then special equipment can also be connected to cleaning.

More details about all this can be found in the video in this article. And if you disagree with something or have questions, welcome to the comments or to the forum.

Due to advanced technologies, modern world The demand for steam cleaners is increasing more and more. The presented device provides the user with an operational process for removing contaminants from various surfaces. However, not all people know which structures are allowed to be cleaned and which ones should be avoided. In this article, we will look in detail at the features and study the instructions for interacting with the structure. We will find out whether it is possible to wash laminate flooring with a steam cleaner?

Can I use a steam cleaner to clean laminate flooring?

Thanks to this structure, it is possible to clean floors of any type of coating. Of course, this also includes laminate. This provides convenience to the housewife, because it is much easier to handle the presented device than, for example, a mop.

The whole process is much more efficient and faster. In this case, you do not need to put in significant effort. The only thing is one insignificant drawback, which is the following: a small sound when the unit is operating. However, the noise will not have time to get boring, since the duration of cleaning does not take much time. But you will be guaranteed that your floor will not fade from stains from a wet product, as would be the case when using a rag. In the case of the device, you will be surprised how shiny the surface in the room will be.

How to clean laminate flooring with a steam cleaner

As for the cleaning process itself, it is the application of some rules that will help you cope with the work much more productively. This list includes the following important aspects:

ATTENTION! You should completely refrain from using steam when the surface is treated with mastic or wax. Otherwise, all existing layers will melt.

• It happens that formations are not eliminated after using a steam cleaner. In such a situation, it is permissible to add detergents. The main thing is that it does not contain glycerin, as well as beeswax. For this task, it is recommended to use vinegar - proven traditional method. Thanks to this, you will add extra shine to your laminate.
• If you are just going to eliminate the accumulation of dust on your floor, then the brush offered by the manufacturers is perfect. This way you won't scratch the surface and there will be no imperfections.

How to remove heavy stains

Since some models offer special napkins, many people use them. However, they sometimes fail to do the job. Most often this happens with caustic stains or stains. To definitely eliminate them, you can use towels. The main criterion for such a choice will be thin and cotton fabric. Don't forget about the same steam. With its help, fatty areas are perfectly eliminated.

It is enough to spend five minutes, and the result will be obvious. At the same time, you will ensure the preservation of environmental standards. But to avoid this, you should first clean it at least twice a week. This way you can prevent the formation of heavily soiled areas.

Steam cleaners in Lately have become very popular, but many warn against using it on laminate flooring. Let's consider this topic in more detail - is it possible to wash laminate flooring with a steam cleaner?

For both laminate and parquet, you can use the following models of steam cleaners:
• Kärcher SV 1902
• Kärcher SC 1030 (with iron)
• Kärcher SC 1122
• Kärcher SC 2500
• Kärcher SC 5800

The Kärcher SC 1.020 model has one feature, which is important to remember when cleaning the laminate: you cannot turn on the steam generator for a constant supply - overheating of the coating may occur, followed by warping.

If you decide to try whether it is possible to wash laminate flooring with a steam cleaner, then when working with all of these devices you need special heating control, since the steam cleaner is capable of producing temperatures close to critical.

To reduce the risk of damage to the laminate, the cloth that is installed in the nozzle holder must be folded several times. It is only slightly moistened with steam and the floor is wiped.

Device according to appearance resembles a vacuum cleaner, only the hose connecting the body to the handle is smaller in diameter. Where the vacuum cleaner has a dust collector, the steam cleaner has a built-in water tank.

3 more features of matya laminate with a steam cleaner

Working with a steam cleaner is easier and more convenient than using a mop; it cleans surfaces much faster and, most importantly, more thoroughly. The disadvantage of cleaning laminate floors with a mop is that a wet rag leaves stains, which over time make the floor surface dull. Steam cleaning does not have this drawback - the moisture immediately evaporates, having only managed to remove a layer of dirt. After such cleaning, the laminate shines like new.

There is also a small drawback - the steam cleaner is noisy during operation. Quieter than a vacuum cleaner, but noticeable. However, given that the duration of cleaning is reduced, the noise does not have time to get boring.

Show content articles

Laminate panels due to their structure have valuable consumer qualities- wear resistance, reliability, ease of maintenance. However, the coating is made from wood, so it is sensitive to chemicals and high humidity. Naturally, users are interested in whether it is possible to use a washing vacuum cleaner to clean laminate flooring.

Determination of moisture resistance of laminate

Most manufacturers have refused to put laminate flooring in classes 21, 22 and 23 on the market because the material is not washable. The moisture resistance level of fibreboard intended for commercial areas falls into classes 31, 32, 33 and 34. However, is it possible to wash such a laminate with a vacuum cleaner?

Moisture-resistant and water-resistant materials are suitable for wet floor treatment. The panels have a base plate with protective layers and impregnation, and top part covered with water-resistant protection.

Before vacuuming the floor with washing equipment, it is necessary to identify the type of technology used in the production of panels. You can obtain information by examining the packaging and the corresponding 3-symbol labeling:

The resistance of the material to moisture also depends on the methods of laying the floor covering. the main task- prevent water from getting under the boards, otherwise the panels will become limp.

If the tongue-and-groove method of gluing the plates was used, then over time, cracks will appear on the floor. Accordingly, water will flow under the boards, which will lead to additional costs.

Note: Do not use for cleaning floors. alkaline solutions, brushes with hard bristles, as well as products based on silicone and wax, as they cause stains that are difficult to remove.

To avoid destruction and deformation of the material, experts advise using water-repellent putty or silicone-based sealants as grout. It is noteworthy that many manufacturers present a product line with lock type Click. The technology makes it possible to fix boards with additional sealing.

Types of laminate locks

Often a rubber strip or wax impregnation is used to prevent water from getting under the panel. Resistance to moisture can be qualitatively increased by using sealants from WEICON.

Rules for cleaning laminate flooring

To increase the service life of the floor covering, during the cleaning process, cleaning company specialists advise wearing soft slippers or walking barefoot. This will prevent scratches on the floor. Correct care depends on use specialized tools, soft bristled brushes and cloths to remove dirt.

Basic rules:

Is it possible to clean laminate flooring with a vacuum cleaner?

Classic cleaning devices designed for dry floor cleaning are maneuverable and carefully clean the surface. This is achieved through wheels with rubber tires and brushes with special stripes. Can I vacuum laminate flooring with a regular vacuum cleaner? Experts note that the use of traditional models is allowed, but wet cleaning with such equipment is only possible with some models.

Note: before purchasing specialized equipment for wet floor treatment, you should read reviews about a specific model. To better understand whether the device is suitable for washing laminated surfaces or not, it is necessary to evaluate the result after cleaning.

Based on this, over the past 5 years the popularity of typical vacuum cleaners has been declining, but manufacturers are developing some models specifically for cleaning laminate floors. Although the equipment is not intended for air purification, it copes with the function of removing dust from the surface. It is noteworthy that high-quality laminate panels have protection, so it is enough to eliminate dust and debris from the surface.

If you plan to purchase a vacuum cleaner with wet cleaning capabilities, you should familiarize yourself with the package. The kit should include special attachments for a specific floor material.

It is better to use special nozzles for laminate flooring.

Vacuum cleaners for dry processing are equipped traditionally - a handle, a housing with a motor, a dust collector, several attachments for different surfaces. Models with bags are easy to use, but they have to be cleaned after each session.

Using a washing vacuum cleaner

In the operating instructions for laminated floor surfaces, manufacturers advise not to use cleaning equipment. This is due to the fact that classic models They are in the economy class and middle price segment, so they have the disadvantage of intense splashing of liquid. Due to low engine power, they are unable to completely eliminate it.

In addition, two additional factors influence cleaning with a washing vacuum cleaner - new generation equipment and the quality of the board.

Manufacturers supply the market with product lines that efficiently clean floors from liquids. According to the developers, the presence of special brushes allows you to absorb moisture up to 95% due to powerful motors, plus they spray liquid products on a smaller area.

The second factor is the class of panels. Products of classes 32 and 33 have high consumer characteristics, which can withstand treatment with washing cleaning machines. It is better not to test class 31 boards.

So using washing vacuum cleaner in relation to floor coverings, it is allowed if there are appropriate technical parameters at the equipment. Accordingly, in the care instructions floor surface the possibility of wet processing must be indicated, i.e. class not lower than 32.

Attention! If liquid is not removed from the floor in time, there is a high probability that it will get into the lower layers, which will cause deformation of the material.

What can be cleaned with a steam cleaner?

Can laminate flooring be washed with steam cleaners? Specialists from cleaning companies note that this technique can be used to treat any surface, since the device belongs to universal types. For example:

Advantages of cleaning with a steam cleaner:

• the ability to get rid of mold and pathogenic microorganisms;
• elimination unpleasant odors and even dampness;
• eliminating stains;
• without using household chemicals;
• increasing the volume of pile in carpet products;
• getting rid of debris and dust in hard-to-reach areas of the room;
• cleaning the surface from grease.

• treat varnished wooden surfaces;
• care for soft plastic;
• affect coatings that are prohibited from contact with water;
• care for silk and velor;
• treat double-glazed windows in sub-zero weather.

A steam cleaner will help remove dust, stains, debris, and hair.

Can laminate flooring be cleaned with a steam cleaner? With the help of the device, housewives can remove dust, stains, debris, wool, and also disinfect the apartment. Additionally, it is recommended to use the microfiber cloth that comes with the equipment.

It is noteworthy that fibreboard you can't douse hot water, so steam should be released periodically. This rule especially applies to low-quality coatings. If there is heavy contamination, the floor can be treated detergents, but without glycerin and wax in their composition.

The steam cleaner is a representative household appliances, thanks to which the user can clean the living space and disinfect various surfaces.

Requirements for a vacuum cleaner for laminate flooring

The quality of the floor covering is one of the parameters for safe cleaning using a vacuum cleaner. Second factor - technical properties cleaning apparatus. Special equipment, intended for wet exposure to the floor surface, must have the following characteristics:

• low consumption of liquid spray, at which the coating will be moistened and not wet;
• suction power - the higher this parameter, the better quality liquid collection (from 450 W);
• drying function after the procedure;
• The kit includes attachments for cleaning fiberboard.

When choosing a model of a cleaning unit, it is worth reading the equipment passport from the manufacturer. The instructions should indicate that the equipment is intended for washing laminate and parquet floors. Multifunctional equipment is best option, taking into account that the rooms of the apartment use different flooring.

Watch a video about wet cleaning of parquet and tiles

A very bold post that will compromise me as a hostess, with many very personal photographs. :) Please be understanding and invite you to a photo walk through the most dirty places my dacha.

First, a little history. I wanted a steam cleaner for a long time, but at that time it cost some fabulous money, which we had a hard time with at that time. It happens that your earnings have increased, and the price of the gadget has fallen, but you still have the association that it is inaccessible. But no! Just like mine - Karcher himself- large and powerful, you can buy it for 5 thousand, and less - for only three.

Let me touch on why this particular company. I scoured the entire Internet, read, read, read... Karcher had a lot of simply DISGUSTING reviews, and they were mixed with enthusiastic ones. I didn’t like this whole thing - you can’t tell which of them are competitors, which are the managers themselves. But I found a thread on the Flyma website about steam cleaners that is as much as 90 (!!!) pages long, read it - it’s very interesting. The girls bought different models and shared opinions. And not bots with 1-2 messages, but long-livers of the forum, real women. I made a LOT of conclusions, for example: buy this particular steam cleaner and under no circumstances buy a manual one.

So, the one in five came to me. There were even more expensive ones - for example, for 20 thousand. Let's see if we need such an expensive device, how steam cleaners generally work, is it a magical thing or should we not hope for a miracle, and how can we even use them in our homes.

Why don't I have a manual one?
I have weak hands and I didn’t want a unit that I needed to constantly hold in weight. After I used the steam cleaner for the first time, I couldn’t put it down and spent the whole day steaming, I realized that my choice was absolutely right.

Why not for 20 thousand?
The difference, as I see it, is in the volume of water (1 l versus 1.5 l), heating power (1500 W versus 1800 W). The decisive factor was the steam pressure - 3.2 bar versus 4 bar, I realized that 3.2 would be quite enough for me - this is a normal, adequate price for a device not for industrial use, but for home use.

How does a steam generator work?
Imagine a mixture of an electric kettle and a vacuum cleaner working “in reverse” - steam under pressure flies out of the nozzle and hits the place we need with force. Heat(more than 100 g) and pressure - everything that can swell and fly off, swells and flies off. Old grease drains off, dry dirt instantly soaks, you simply wipe the resulting dirty moisture with a napkin. But if you want to clean lime deposits, or very old burnt areas on the stove, first treat with a special product, and then with steam.

What do you clean with a steam cleaner?
Anything that is not afraid of hot steam.
Tiles - especially in the kitchen, with grease, between tile joints- with a bang. The stove, especially nasty places like handles with small details, oven. clothes, greasy spots and generally refresh wrinkled items and curtains. Carpets and sofas are extremely important if there are animals and children. :) Toilet, bathroom - fast and perfect. Heating radiators - this is why they squeaked in all the reviews that I read. The flowers are washed - albeit at a distance, so as not to scald them. Floors - there is a special nozzle. Windows, mirrors - but this attachment is sold separately. Walls, doors, furniture, etc. - everything that - I repeat - is not afraid of hot steam. Any dirt that can be dissolved with boiling water can actually be cleaned off.

Where does the dirt go?
It does not disappear anywhere - it dissolves into steam and the cleaned, damp area must be wiped with a dry cloth or napkin. If there is a cloth on the steam cleaner nozzle, everything will stay on it.

Should we expect miracles?
If you haven’t washed your stove for three years, it won’t be enough to wash it once and expect it to shine like the day you bought it. On difficult places(for example, heavily scalded) need to be pointed and held, rubbed with a brush attachment. For ordinary cleaning, yes, this is simply a miracle. Cleaning is easy, pleasant and... sterile - steam kills everything.

What attachments are there?
It is my model that simply has a narrow nozzle that knocks out dirt from any crevices; a small stiff brush, cleans difficult places, a wide flat brush, and also a fabric cover, for cleaning fabrics, sofas and glass and washing surfaces; a nozzle for the floor and also a hook for it; two pipes extending the handle of the steam cleaner. I also immediately ordered a glass nozzle, theoretically I can get by, but it will make cleaning windows faster.

What are the very big advantages?
There is no need to come into contact with chemicals or breathe it - the steam cleaner cleans without it. There is no need to smear, then wait, and then vigorously scrub for a long time, everything is much easier to clean, effortlessly. Cleaning takes place in a matter of minutes. It washes away things that couldn’t be reached or scrubbed off.
I also save on cleaning products and more: I changed my mind about painting the walls and radiators again, the hood also came to zero)))

And now there will be that terrible part of the post, where I will show real photos Before and after.

What makes me a little sad is that this is a dacha, and children constantly come running from the street covered in dirt, sand, fruits and berries, and with their beloved hands they simply grab EVERYTHING. I'm not even talking about smearing, spilling, etc. And all four of them do this. :(Even the older one.

I'm really TIRED because my efforts are not worth how long this cleanliness lasts (minutes). Squirrel in a Ferris wheel. Therefore, while waiting for the steam cleaner, I simply gave up on washing, deciding - let’s test it, let’s test it!)))

A dermantine sofa, it’s over 10 years old (I think it’s 12 years old). The coating has wrinkles, everything that falls and spills from the table gets clogged there; simply wiping it with a sponge does nothing at all. Twice a summer I coat it with chemicals, wait half an hour, and then rub it long and hard with a brush, and after that I rinse the whole thing off with water, then wipe it dry. This is hell.

But this is what the sofa looked like after the steam cleaner, I spent 10 minutes on it (the WHOLE time) - it was Alina who literally tore it out of my hands to try it herself. There was a feeling of MIRACLE, because under the hot sweat of steam, the dirt simply dissolved, disappeared, I simply ran a cloth, collecting the muddy moisture.

The nozzle got into all the cracks where I couldn’t get. The sofa is like new - I'll show you a photo below - from afar.

And these are the doors of the country closet, and again everything is bright. Mugs are stored here, so it is the most popular place for piggy children. It gets dirty once or twice, but do you see what the texture is? The same thing - it gets clogged and requires scrubbing with the abrasive side of a washcloth along with Mr. Muscle.

I managed the steam generator in 2 (well, let it be THREE) seconds. Steam penetrates all the cracks and dirt in the form of water simply appears on the surface. Two doors completely - 20 seconds, I timed it.

Blinds are a very sore subject of mine.

First of all, they are gold, and dust immediately makes them look terribly dull.
Secondly - flies. All the same, by some miracle they get into the house and then these POINTS... oooh..... You understand what I mean.
Thirdly, I actually cursed myself that I didn’t buy simple curtains- washing blinds is some kind of PPC... (((

As a result, I wash them once a year, in the summer. Usually before my mother-in-law arrives, yay)))) I dedicate the day just to this - I have 4 of them, three large ones and some are completely WHITE.

Something I’ve done here with the light, in general they are yellowish))) but the dirt is in all its glory and so about ten square meters, can you imagine how much I hate them?

It would be worth buying a steam generator just for the blinds)))))
I ran along one strip twice - once I soaked the dirt, the second I drove away the unclean water.
There is a towel underneath to catch dripping moisture.

I didn’t even take off the white blinds “BEFORE” for fear of massive unfriending)))))))
This is "after".

A completely different matter!!!
At the same time, as if casually, I washed the windows. All the fly spots were washed away with one touch of the nozzle.

I haven't washed my microwave for 1.5 months. I could justify myself by the fact that there is no hot water, but I won’t - my laziness is all that, if I wanted, I could heat the basin, soak it with something stronger and wash and rub. It’s better to swim in the pond or lie down with a book... (((

It took a whole 30 seconds to wash the door - the fat just melted, mixed with water and I wiped it off with a napkin and this is what happened. Once - that's all. True, I used the maximum steam with a brush attachment. Then another 10 seconds and I got it to perfection, but didn’t get distracted by the camera - it pulled me into the microwave and I steamed the soap, just really enjoying it.

I solemnly promise that this will only make my microwave sparkle!

I was a very stupid woman when three years ago I painted the kitchen with my own hands. White color. This is my second big mistake after buying blinds.

Enemies do not come to us at night to dirty the walls - all this is done by our beloved children and often with dirty heels. How can you not lie down and rest your foot against the wall?!

This was all NOT WASHED OUT. I cried, swore, and threatened. No use. My husband brought super products, but the dirt apparently got stuck in the micropores of the wall and not a single brush would remove it.

I dropped my hands, spat, and planned to paint my pussy a dirty gray color. I didn’t expect a steam cleaner here. I’m generally silent about hands and fingerprints. And my husband can still swat a mosquito or a fly on a snow-white wall, although I’m ready to swat my husband for this.

But it’s completely in vain! The stains simply melted and ran down the wall. All I had to do was collect them with a dry cloth.

Here it is after the renovation.

What’s especially great is that the steam removes dirt from all the cracks that I just picked with a toothpick.

Country microwave. Like you just bought.

By the way, these are all events of one day. And I wasn’t even tired - the handle with the gun is VERY LIGHT - just soar and soar. I would have died with a manual one.

I washed all my household appliances inside and out. It costs the same as if it came from a store. Sparkles. EASILY! All the cracks.

We have a used refrigerator; my husband opened it and even shuddered - like a stranger. :) He came to us in worse condition.

I usually clean the refrigerator for at least an hour. Now, to be honest, I didn’t time it, but about 20 minutes, no more. All the elastic bands became snow-white.

This is my first day with the steam cleaner. Without using a single drop of chemicals, after which I itch and cough, and we have two other allergy sufferers in the house, NOT TIRED, I did:

Four blinds
- four windows
- fridge
- microwave
- bread machine
- multicooker
- air fryer
- kettle
- table
- three chairs
- two sofas
- white walls
- kitchen cabinets inside and out
- floors

That is, my kitchen was like a sterile operating room - the steam disinfects it.

The next day I generalized the hallway, fireplace, staircase with balusters, our bedroom - all with furniture.
I washed all the windows, floors, and sometimes the walls - now I’ll show you a few more photos.

Parquet in the fireplace is one of problem areas- soot is still flying.
Special nozzle for the floor.

While mom went to get water for the steam generator, Yashka decided to join in the cleaning.)))
Don't give it to children - you might get scalded.

Mirrors and windows - for this I ordered a separate attachment, which is not included in the kit.
I'm not very enthusiastic about her, to be honest. To wash a large number of windows and quickly - yes, but you need to go with microfiber and quickly rub in the stripes that remain along the edges of the nozzle.

Although I’m already capricious - the washing speed is crazy, you can spend even a second erasing a strip.

In principle, you can wash glass with the nozzle that comes with it:

In the photo I am cleaning the sofa for her.

And this is our, so to speak, HISTORY.

When the children were 2-3 years younger, they still drew on the walls. I couldn't clean it off the lining with anything at all. My husband suggested trying a steam generator - I agreed and..... there are no more rock paintings!

It’s even a pity, I’m used to it.))))