Glass ceramic surface

EHS 6651P

User manual

Please be sure to follow these rules, otherwise the user loses the right to warranty service if a malfunction occurs in the device.

This device complies with the following EU directives:
— 73/23/EWG dated 19.02.1973 “Low voltage regulations” -89/336/EWG dated 05.03.1989 “Electromagnetic compatibility regulations”, including amendments to regulations 92/31/EWG
- 93/68/EWG dated 22.07.1993 “Regulations on CE identification marks”

Correct operation
This appliance may only be used for cooking and frying. food products at home.
It should not be used as a work desk or as a place to store any items.
Any rearrangement or design changes of the device are unacceptable.
Do not place flammable liquids, flammable materials or fusible objects such as film, foil, plastic, aluminum, etc. on the device, or store it on or near it.

Safety precautions for children
Keep small children away from the appliance.
Older children should only use the appliance under the guidance and supervision of an adult.
To prevent accidental activation of the device by small children or pets, we recommend that you activate the child lock.

General Safety Precautions
Installation and connection of a new device may only be carried out by trained and qualified specialists.
Built-in appliances can be used only after installing them in built-in cabinets and countertops that meet the necessary technical standards and are suitable for such use.
If any malfunctions are detected in the operation of the device or damage to the glass ceramics (breaks, ruptures or cracks), the device must be turned off and disconnected from the power supply to avoid possible electric shock.
Repairs to the device may only be carried out by trained and qualified specialists.

Safety precautions when using the device
Overheated fats and vegetable oils ignite quickly. Do not leave cooking foods (such as French fries) unattended.
If you handle the device carelessly, you may get burned.
Remove all stickers and protective films from the glass-ceramic panel.
Power cords should not touch hot surfaces of electrical appliances or hot cookware.
After each use of the appliance, turn off the burners.

Safety precautions when cleaning the device
Before cleaning, the device must be turned off and allowed to cool.
For safety reasons, do not clean the appliance with steam cleaners or high-pressure cleaners.

How to avoid damage to the device
The glass ceramic panel may be damaged by objects falling on it.
Impacts from kitchen utensils can damage the edge of the glass-ceramic hob.
Glass ceramics can be damaged by handling cast iron or aluminum cast cookware, or cookware with damaged bottoms.
Fusible substances and food that has boiled over may burn on the glass-ceramic hob. Therefore, they should be removed as quickly as possible.
Do not allow liquid to boil over in pots and pans. This may damage the cookware or glass ceramics.
Do not turn on the burners without cooking utensils or with empty kitchen utensils.

Description of the device

Equipment hob

Functional elements of the control panel

Touch Control fields
The device is controlled using Touch Control touch fields. The required functions are activated by touching the sensor fields and confirmed by acknowledging sound signals. Touch fields should be touched from above, without covering other sensor fields.

Touchfield		Function
	On off.	Turning the device on and off
	Increasing set values	Increasing the heating level/increasing the time values
	Reducing set values	Reducing heating level/reducing time values
	Timer	Timer selection
	Blocking	Locking/unlocking the control panel
	Switching the three-circuit burner	Turning external heating zones on and off
	Frying zone	Switching the external heating circuit on and off

Indication

	Indication	Meaning
		The burner is off
	Keep warm stage	Keep warm level set
	Heating levels	Heat level set
	Automatic boiling	Automatic boiling activated.
	Problem	The device performed an incorrect operation
	Residual heat	The burner has not yet cooled down
	Child lock	Child lock/lock switched on
	Safety shutdown	Safety shutdown activated

Residual heat indicator

Warning! Residual heat from the appliance can cause burns. It takes some time for the burners to cool down after they are turned off. Observe the residual heat display GD.

Residual heat can be used to reheat and keep cooked food warm.

Turning external heating circuits on and off

By turning on or off the external heating circuits, you can adjust the total heating area of ​​the burners depending on the size of the cookware.
Before turning on the external heating circuit, it must be turned on inner circuit heating

Three-circuitburner	Touchfield	Controlindicator
Turning on the middle heating zone	(G) Touch for 1-2 seconds	One indicator light is on
Turning on the external heating zone	О Touch for 1-2 seconds	Two control indicators are on
Disabling the external heating zone	О Touch for 1-2 seconds	The second control indicator goes out
Disabling the middle heating zone	£) Touch for 1-2 seconds	The first control indicator goes out
HotplateForfrying	Touchfield	Controlindicator
Switching on the external heating circuit	NW Touch for 1-2 seconds
Disabling the external heating circuit	C5 Touch for 1-2 seconds

Locking and unlocking the control panel
To avoid accidental failure of the set parameters, for example as a result of wiping the device with a cloth, the entire control panel, with the exception of the On/Off touch field, can be locked.

When the device is turned off, the blocking mode is automatically canceled.

Application of automatic boiling
All four heating zones are equipped with automatic boiling.
If you set the heating level using the + touch field, starting from parameter 0, the cooking zone turns on at full power for a certain time and then automatically returns to the set heating level.

	Panelmanagement	possiblestepsheating	Indication
Power on(only beginningwithvalues0)	Touch the touch field +	FROM 1 BEFORE 8	(after 5 seconds)
Shutdown		from 8 before 1 / ABOUT	from 8 to 0
do not use	Touch the touch field -	from9 before 0	from 9 to 0

If during the boiling pulse the user selects a higher heating level, for example moving from stage 3 to 5, then the boiling time will be adjusted. IF there is still residual heat in the cooking zone (indication H), the boiling pulse will not start.

The duration of the rapid boiling pulse depends on the selected heating level.

stageheating	Durationimpulse[ min.: sec.]	Forboiling

Applying child lock
The child lock system prevents unauthorized use of the device.
Enabling Child Lock

The device turns off. Child lock is enabled.

Forced removal of child lock
You can cook food separately using the procedure below; After that, it will disable child protection for a while and will be activated again.

Until the next shutdown, the device can be used as usual.

After forcibly canceling the child lock, you must set the appliance to a heat setting or function for about 10 seconds, otherwise it will switch off automatically.

Disabling child lock

The device turns off. Child lock is disabled.
Using the Timer

If, in addition to setting the short-term timer time, a heating level is set for a given hotplate, then this hotplate switches off after the set time has elapsed.

When a hotplate is switched off, the set timer function is also switched off.

Selecting a hotplate

	Control Panel	Indication
1.		The burner indicator flashes.	indicator
2.	Touch the CLOCK touch field once	The burner indicator flashes	indicator
3.	Touch the CLOCK touch field once	The burner indicator flashes	indicator
4.	Touch the CLOCK touch field once	The burner indicator flashes	indicator	fourth

After the control indicator flashes slower, you can set or change the heating level of the cooking zone.
If other timer functions are also set, after a few seconds the shortest time of all timer functions appears and the corresponding control indicator starts flashing.

Setting the time

The time has been set.

Disabling the timer function

The control indicator goes out.

The timer function of the selected cooking zone is disabled.

Time change

After a few seconds, the blinking frequency of the control indicator decreases.

The time has been set.

The time is counting down.

Indication of remaining cooking time

After a few seconds, the control indicator begins to flash more slowly.

Mute the beep

The beep stops.

Safety shutdown
Cooking zone
If the heat level for a hotplate is not set within approximately 10 seconds of switching on the cooking zone, the cooking zone will switch off automatically.
If one or more touch fields are covered for more than 10 seconds by any objects (pots, rags, etc.), a sound signal will sound and the burner will automatically turn off.
If all burners are switched off, the cooking zone will switch off automatically after approximately 10 seconds.

Control Panel
If one or more touch fields are blocked for longer than 10 seconds, an audible signal will sound. The sound signal is automatically turned off when the touch fields no longer overlap.

Burners
If at least one of the burners is not turned off after a certain time or the heating level is not changed, the corresponding burner will automatically turn off.

A note regarding acrylamide
According to the latest results scientific research Intensive heat treatment of food products in order to obtain a golden brown crust is dangerous to human health due to the harmful effects of acrylamide. This especially applies to products that contain starch. Therefore, we recommend cooking food at the lowest possible temperature and not browning the food too much.

Cookware
Determine suitable cookware for cooking based on the bottom. The bottom should be thick and extremely smooth. Cookware coated with steel enamel, as well as cookware with an aluminum or copper bottom, can leave marks on the glass-ceramic panel that are difficult to remove or completely impossible to remove, changing original color panels.

Energy Saving

Place cookware on a hotplate only before turning it on.
If possible, always cover pots with a lid.

To benefit from residual heat, turn off the burners until the end of cooking.

The dimensions of the bottom of the pan and the burner should be the same.

Examplesapplicationsatcooking

The data in the table below is indicative only.

stageWayready— heatingphenomena		Purpose	Duration
		Residual heat, Off position
	Support— zhanieheat	Keep warm prepared hot dishes	as needed	Cover the product
	Melt down— tion	Hollandaise sauce, Melting butter, chocolate, gelatin		Stir occasionally
	Thickening	Whipped omelette, egg jelly		Cook covered
	Languor	Simmering rice and dairy dishes Warming up ready meals		Add water to the rice, increasing its quantity is at least doubled. Dairy dishes occasionally stir
	Zapari— tionAllowance	Poaching vegetables Braising meat		Add to vegetables completely a little water (no more than a few tablespoons)
	Cooking	Steaming potatoes		Use small amount of liquid for example max. 1 liter of water per 750 g potatoes
		Cooking significant volumes of food, thick soups and other	up to 3 liters of liquid plus 60-150 min. l dish ingredients
	Light frying	Schnitzel, sausages "cordon bleu" chop cutlet, meatballs, raw sausages for frying, liver, flour gravy, eggs, omelette, frying donuts	continuous roasting
	Intensive— privatefrying	Potato pancakes, roast tenderloins, steaks,	5-15 min. on each side	Turn over from time to time
	Boil FrytionFritirotion	Boiling large quantity water, boiling “dumplings”, frying meat (goulash, poached roast), deep-frying “french fries”

Washing and care

Carefully! Residual heat from the burners can cause burns.
Attention! Sharp and abrasive cleaning agents will damage the appliance. Clean the device with water and a mild detergent.

Attention! Residues from cleaning agents damage the device. Remove them with water and detergent.

Cleaning the device after each use
1. Wipe the device with a damp cloth and some detergent.
2. Dry the device with a clean cloth.

Removing contaminants
1. Place the cleaning scraper at an angle to the glass ceramic surface.
2. Using sliding movements of the scraper blade, remove dirt.
3. Wipe the device with a damp cloth and some detergent.
4. Dry the device with a clean cloth.

	delete
Type of pollution	immediately	from a cooled down device	by using
Sugar, foods containing sugar			scraper for cleaning
Plastic, aluminum foil			pollution*
Traces of lime and water
Splashes of fat			cleaning products for glass ceramic surfaces and of stainless steel*
Stains with metallic sheen, changing the original color of the surface

* Scrapers and cleaning products for glass-ceramic and stainless steel surfaces can be purchased in specialized stores
Remove particularly stubborn stains using a glass ceramic or stainless steel surface cleaner.
Scratches and dark stains on glass ceramics cannot be removed, but they do not affect the normal operation of the device.

What to do, if…

Problem	Possible reason	Troubleshooting method
Burners do not turn on or do not work	More than 10 seconds have passed since the device was turned on	Turn on the device again.
		Disable child lock (see section "Child Lock")
	Simultaneous touching of several touch fields	Touch only one touch field
	The protective shutdown of the device has tripped	Remove any foreign objects from the control panel. Turn on the device again.
	Child lock enabled	Turn off child lock (see Locking and unlocking the control panel)
The sound signal sounds when the device is turned off	The control panel is completely or partially covered by an object	Remove item
residual heat indication.	The burner has just been turned on and has not had time to heat up.	If the burner is hot, contact the service center.
automation	There is still residual heat in the burner And	Allow the burner to cool.
	The maximum heating level GD is set	The maximum heating stage provides the same burner power as the automatic boiling system.
	The heating level was set by touch field ^	1. Turn off the burner. 1. Program the operation of the hotplate using the touch field &
A beep sounds, the device turns on and turns off again after 5 seconds; after another 5 seconds another beep sounds.	The “Ein/Aus” (On/Off) touch field is covered by something, such as a rag.	Do not place any objects on the control panel.
Q indicator lights up	The burner overheating protection has tripped	Turn off the burner. Turn it on again.
The indication appears (U with a number	Electronic system error	Disconnect for a few minutes device from the mains (remove home fuses electrical wiring). If after turning on the device display B appears again, contact the service center.
The display shows (Y and minus	Too much lighting on the control panel, such as bright sunlight	Cover the control panel for a short time, for example with your hand. A beep sounds and the device turns off. (again) turn on the device

If you are unable to resolve the problem using the above measures, please contact an authorized service center.

Warning! Only specialists have the right to repair the device. Unqualified repairs can have dangerous consequences for the user of the device.
If you use the services service center on erroneous grounds, then a visit to a service center technician may be subject to a fee even during the warranty period.

Disposal

Packaging materials
Packaging materials are environmentally friendly and recyclable. Synthetic parts are equipped with special markings, for example: >PEPSInstallation instructions

Safety instructions
Observe the laws, regulations, instructions and standards in force in the country in which the device is installed. (These include safety requirements, rules and procedures for disposal, etc.).

Installation of the device may only be carried out by a qualified specialist.

Maintain the minimum allowable distances from other appliances and furniture.

A protective tray must be installed under the device.

The cut surfaces in the worktop must be protected from moisture using an appropriate sealing material.

The seal should connect the appliance to the countertop so that there are no gaps left.

Do not install the device in close proximity to doors or under windows. An opening door or window can knock over hot dishes in the heating zone.

WARNING!

Electric shock hazard.

The power supply connector is live.
Disconnect the power supply connector.
Be guided wiring diagram electrical connections.
Follow safety rules when handling electrical appliances.
Correct installation devices connected to the network must be reliably protected from contact with live parts.
The device must be connected to the network by a qualified electrician.

ATTENTION!
Problems caused by electrical current. Loose and incorrectly installed plug connections can cause the connector to overheat.
Terminal connections must be installed technically correctly.
The power cord should not be too tight.
For single or two phase connections, use a suitable power cord type H05BB-F Tmax. 90° (or higher).
If the power cord of this appliance is damaged, it should be replaced with a special power cord type H05BB-F Tmax. 90° or higher. It can be purchased at the service center.
During the electrical installation, it is necessary to provide a device that allows you to disconnect from the network a device with a contact opening width of at least 3 mm across all poles.
Suitable trip devices for this purpose include, for example, emergency switches, fuses (screw fuses must be removed from the holder), automatic safety switches and contactors.

Simply indispensable in any kitchen, and electrical appliance Electrolux EHF 96547 XK (reviews note stylish and modern design products) especially, because he acts as a real assistant in the house. Saves energy, heats up quickly and allows you to cook and reheat any dish.

Electrolux EHF 96547 XK: description

Electrolux EHF96547XK meets all modern quality standards. It has four burners that allow you to cook several dishes at the same time. Two of them have an additional expansion area. One is oval and the other is round. These burners can be used for cookware of non-standard sizes.

The control panel of the device is touch-sensitive. There is a button to turn the device on and off, which works with one touch of your finger. The child lock feature is active. You can completely lock the control panel and, if necessary, unlock it. There is a Stop + go mode, as well as a button to turn off and turn on the external circuit. When operating the device, the automatic heating mode is often used.

The panel displays the heating power, which can be set using a special ruler. It indicates which burner is in use. There is also a countdown timer here that allows you to determine the operating time of the burner. The OptiHeat Control indicator notifies how cold the Electrolux EHF 96547 XK panel has cooled.

The surface type of the device is electric. Work zone made of glass ceramics. requires careful treatment and careful care.

Electrolux EHF 96547 XK device: characteristics of technical parameters

As mentioned earlier, the product has four Hi-Light burners. The front left has a rated heating power of 800/1600/2300 W, which corresponds to the following surface diameters: 120/175/210 mm. The rear left and front right burners have a heating power of up to 1200 W and a diameter of 145 mm. The rear right burner is an elongated oval shape and can have diameters of 170 and 265 mm with powers of 1500 and 2400 W, respectively.

Electrolux EHF 96547 XK household appliances are powered by a radiant heater. The characteristics of the product are noted by the touch control panel, which launches its functions with just one touch of a finger. In stock - sound notification, emergency shutdown of the device. There is self-diagnosis of possible faults. The unit has automatic switching on, as well as indicators for power, residual heat and cooking time. Residual heat can be used for cooking, which will significantly reduce energy costs. The power consumption of the device is 7.1 kW. The width of the unit is 59 cm, its depth is 52 cm, its height is 11.8 cm. The width of the product niche is 56 cm, and its depth is 49 cm. Weight household appliance- 7.9 kg.

Produced in black with gray stainless steel edging, model Electrolux EHF 96547 XK. Manufacturer country of this product- Germany. The warranty for this product is issued for one year.

Installation of the device

Before installing the Electrolux EHF 96547 XK panel (reviews note that the product fully performs all functions declared by the manufacturer), you should rewrite all specifications, which are located at the bottom of the device. The device is then mounted in kitchen furniture, specially designed for built-in hobs. Household appliances are manufactured together with a power cord.

Electric hob should be located at a distance of 50 cm from wall cabinets and at the same distance from walls and other surfaces. A protective floor is installed under it. The installation of the device is described in more detail in the operating instructions for Electrolux EHF 96547 XK. Connection to the electrical network is made only after complete installation panels.

Do not connect the device to or into an extension cord. The wire must be fixed when connecting, and the plug must fit snugly into the socket.

About using the product

The built-in hob (electric) turns on with one click on the power indicator. The control program includes an automatic shutdown function that turns off the device if:

• every single burner is completely turned off;
• the power is not set after turning on the device;
• the control panel is flooded with some kind of liquid or if a foreign object has been on it for more than 10 minutes;
• the burner is not turned off, and the heating power remains unchanged.

Before turning off the device, the hob emits a characteristic sound signal.

If the heating power is at 1-3, the device will turn off after six hours. With a reading of 4-7, the device will automatically stop working after five hours. At the 8 to 9 mark the panel will turn off after 4 hours. If the heating power is at 10-14, then the device stops working after 1.5 hours.

To turn on the power, you need to click on the required mark on the panel ruler. You can set the power by sliding your finger along the ruler to the desired parameter. If the burner is not working, O is displayed on the control panel. When the burner is working, a power indicator from 1 to 14 appears. Half zero means that the Stop + go function is running. If the letter E plus some number is displayed on the panel, this indicates a possible malfunction of the device.

The two burners on the hob have several operating circuits that can be turned on and off using the corresponding buttons. This feature allows you to use different sizes of cookware for cooking.

When cooking food, you can use the Automatic Heat function (indicator A). This mode heats up the burner faster. First, it heats it up to maximum power, and then reduces the temperature to the required one.

The Stop + go function switches all cooking zones to a lower heat level. When it is turned on, the power level cannot be adjusted. This mode does not affect the operation of the timer in the Electrolux EHF 96547 XK.

The instructions note that while the device is operating, you can completely lock the control panel and use the child lock mode, which prevents accidental activation of the product. Its activation is indicated by a burning letter L on the control panel.

The OffSound Control button indicates the level of residual heat. Three sticks indicate that the panel is working and the cooking process is in progress, two indicate maintaining heat, and one indicates residual heat.

Caring for your household appliance

The Electrolux EHF 96547 XK electric hob requires careful and attentive care. Its surface should be washed after each cooking. Before placing the cookware on the hob, make sure the bottom is clean. The operation of the cooking equipment is not affected by scratches and dark spots. To clean the surface from dirt, use special remedy for hobs and glass scraper.

If the appliance comes into contact with hot plastic, foods containing sugar, or plastic bag, then they must be removed immediately. To do this, tilt the scraper at an acute angle (45°) and thus gradually clean the panel. All other contaminants are removed after the Electrolux EHF 96547 XK has completely cooled. The control panel requires the same careful care as all other parts of the device.

Energy Saving

The Electrolux EHF 96547 XK hob will significantly help you save energy when cooking. The instruction manual recommends using the following tips for this purpose:

• Place dishes before the burner is turned on.
• The dimensions of the bottom of the container and the burner must be identical.
• Small containers should be placed on appropriate burners.
• The dishes must be placed on central part burners.
• If water is heated, then it needs to be poured a little more than required.
• When cooking, it is recommended to cover the pan with a lid.
• You can use the residual heat to melt food and keep food warm.

The built-in hob (electric) requires special attention. So, for cooking on it, you should choose containers with a thick and flat bottom. If the container is made of aluminum, copper or enameled, this may affect the color change of the hob.

To save money, use the ÖkoTimer function, which turns off the cooking zone shortly before the countdown timer sounds.

• Heating power up to one in Stop + go mode. Allows you to keep food warm.
• From one to three. In this mode, dishes can be cooked from 5 to 40 minutes. This is Hollandaise sauce, melting food, thickening eggs, scrambled eggs.
• From three to five. Rice and milk dishes are prepared. Can be reheated ready food. Working time is 25-50 minutes.
• From five to seven. Preparation of vegetables, fish and meat dishes for a couple. The whole process takes from 20 to 45 minutes.
• From seven to nine. Steamed potatoes are prepared. Cooking time is from 20 to 60 minutes.
• From nine to twelve. Lightly frying foods. Cooking pancakes, donuts, eggs.
• From twelve to thirteen. Deep frying of meat and fish dishes. Their preparation time is 5-15 minutes.
• Mode fourteen. Boiling water. Boiling cereals. Cooking roasts and goulash. Deep frying.

The hob is easy to operate. To cook with it, you don’t need any special skills; you just need to carefully study the instructions in detail.

Safety precautions

Before installing and using the equipment, you must read the instruction manual. Please remember that incorrect installation of the device can cause injury and damage. If you lack skills in installing built-in hobs, it is better to trust this work professionals.

Children should not be allowed to play with the product or its packaging materials. Do not allow children or pets near the appliance while it is running or when the panel is not cool enough. It should be remembered that during operation all parts household appliances get very hot. The child lock feature must be used at all times. Children under three years of age should not be near the panel, especially if adults cannot provide adequate supervision.

It is prohibited to start the device into operation using an external timer. Do not leave food that is cooked in oil or fat on the surface of the panel, as this may cause a fire. When frying in oil, the pan should be covered with a lid. If a fire occurs, the appliance should be immediately unplugged from the outlet and covered with a blanket.

Various objects must not be placed on the hob. This also applies to metal products: knives, spoons, forks, lids, etc. Do not clean the device with a steam cleaner.

If cracks have formed on the glass-ceramic surface or it has begun to crack, then such a device cannot be used, but it should be disconnected from the electricity to avoid electric shock. If the power cord is damaged, it must be replaced at the nearest service center.

Installation of the device should only be carried out by a qualified technician. Do not install a damaged device. When installing the product, you must follow the operating instructions.

All necessary gaps between furniture and electrical appliances must be maintained. The cut surfaces of the countertop into which the panel will be mounted must be lubricated with sealant to prevent the wood from swelling under the influence of moisture.

Equipment must be protected from moisture and steam. It is not installed near doors and windows. Otherwise cookware may fall off the panel when opening a door or window. If the built-in panel is located above drawers that slide out, then there should be sufficient space between them for air ventilation.

The bottom of the hob becomes very hot during operation, so there should be a fireproof gasket under the appliance to prevent penetration into the appliance from below. The product must be connected to the electrical network by an electrician. The hob must be grounded. Maintenance and cleaning of the device should only be carried out when the panel is unplugged.

Before putting the product into operation, you should make sure that the device parameters correspond to the parameters of the electrical network in the apartment. Before using the device, you must ensure that it is installed correctly. A loose cord or a loose plug in the socket can cause overheating of the contacts. You cannot use a power cord from another appliance for the built-in hob. It is necessary to ensure that the electrical wires do not get tangled with each other, and that the cord is not too tight. If the outlet is located near the panel, you should make sure that the cord does not swing. It should not touch the appliance or hot dishes, as it may melt if it comes into contact with them. It is prohibited to use extension cords and tees when connecting the panel.

Before first use, remove all packaging, protective film and stickers. The device is intended for residential use only. When installing it, the ventilation openings must not be covered.

The device must not be left unattended or touched wet hands. Do not touch the device if water has come into contact with it. First you need to disconnect it from the electrical network.

Price

It has a very reasonable price for equipment of this level Electrolux EHF 96547 XK. The price of the device ranges from 14.5 to 20 thousand rubles. The lowest cost of the product is noted in retail outlets“Technostudio”, “Megabit”, “Eldorado”, “Technosila”, “OGO”.

It is not enough to purchase modern kitchen appliances for cooking; it is also important to learn the rules of its operation. Many have already appreciated the benefits of induction cookers, and most owners claim that they will not return to old electric cookers, even with a glass-ceramic surface. And some are ready to sacrifice the savings that could be had they installed gas equipment (in houses where such an opportunity exists), and give preference induction cookers. Why this kitchen appliances is so popular among consumers, and how to properly use an induction hob?

In comparison with gas and simple electric stoves, this type of equipment has the following advantages.

Connecting an induction cooker

Connecting an induction cooker requires certain knowledge and skills in electrical engineering. The choice of location for installing the device is dictated by the following requirements:

• installation of the slab is carried out on a flat floor/surface without distortions;
• ventilation is provided, small gaps are provided - the device should not overheat;
• the stove must be grounded;
• For connection, a cable with a cross-section of 2.5mm² is used;
• The section of wiring leading to the device must be copper;
• presence of an outlet close to the place of planned installation of the device;
• household wiring must match the load level created by the operating appliance.

If the device is not equipped with a power cable, then you should purchase a power cord yourself, based on the characteristics of the device specified in the documentation. It would be a good idea to consult with a specialist.

Connection cable induction panel

Attention! Errors when self-installation an induction cooker is fraught with breakdown and loss of warranty service for the device, as well as problems with household wiring.

If you are not confident in your abilities, it is better to contact a professional specialist about connecting an induction cooker.

Switching on and off order

An important aspect in operating an induction panel is the correct switching on and off of the device. Majority modern models are equipped control panel. Activating the operation of such induction cookers consists of the following steps.

1. The device is turned on by holding the “On/Off” button for several times.
2. The cooker beeps and displays the control menu.
3. Using the menu, the user needs to select a burner, set heating parameters and a cooking program.

Turning off the induction cooker at the end of cooking is done using the control panel (item “Shutdown”), if available. A device not equipped with a display can be turned off by pressing the “On/Off” button, which must be held for several seconds until the hob turns off.

Operating modes

Method for setting the heating power of an induction burner different models is different. It can be:

• touch buttons on the control panel with intuitive symbols “+” and “-”;
• touch digital scale, with the help of which the degree of heating increase is carried out by swiping your finger to the right, and to decrease the power - to the left (slider control);
• mechanical regulators, rotated clockwise to increase heating power, and in reverse side- to reduce heat supply.

In premium-level stoves, the heating power of the burner is adjusted automatically using built-in sensors that determine the size of the cookware.

The number of temperature gradations varies from 3-5 to 10 or more depending on the class and equipment of the device.

Slider power control

To make using an induction cooker more convenient, manufacturers equip the devices with additional functions.

1. Booster Mode— transfer of energy from a free burner to a working one, which allows you to speed up the cooking process.
2. Possibility of combining the power of two adjacent burners when using oblong-shaped cookware such as a duck pot.
3. Programmed to certain parameters time and temperature modes for preparing various dishes.
4. Heating function dinner left on the stove for a long time.
5. Automatic switch-off of burners- emergency mode is triggered when it hits work surface liquids.

Some models have built-in cooking modes

Locking and unlocking the surface

Convenient additional option it is considered possible to block the device from accidentally turning on the oven, changing settings by careless movements or by children. When the lock mode is activated, the device does not respond to pressing the touch buttons on the control panel.

The mode is activated and deactivated by holding for 3 seconds buttons with a key/lock icon. A message should appear on the control panel indicating that the lock mode is enabled/disabled. On some models, instead of a message indicating that the lock option is activated, an indicator in the form of a key/lock appears.

To lock the panel use a key in the form of a lock

The procedure for activating and removing protection against accidental clicks may differ for different models. Therefore, it is recommended to carefully study the operating instructions for your specific induction cooker.

Choosing cookware for an induction cooker

There are special requirements for cookware for induction cookers. As for any electric stove, the dishes must have thickened bottom at least 2-6 mm or, in relation to frying pans, a solid anti-deformation disk - this will help avoid deformation during strong heating. In addition, the diameter of the bottom should not be less than 12 cm. You can use the Turk on an induction cooker only with the help of a special adapter.

The bottom should be flat so that it fits as tightly as possible to the surface. Do not use pots or pans with concave or damaged bottoms. It is also better to discard cookware that was previously used on gas stoves.

The utensils must be made from ferromagnetic material- it is he who will allow it to react with copper coils.

A special icon will help you check whether the cookware is suitable for cooking on an induction hob - a pictogram in the form of rounded zigzags or the inscription “induktion” on the bottom of the pan.

This is what the cookware designation for an induction cooker looks like

If there are no signs, you can check the suitability of the dishes using a regular magnet. If the bottom attracts it, then the cookware is suitable for induction. As suitable option stands out – stainless steel, enameled and cast iron cookware.

Safety regulations

Induction cookers compared to gas and conventional electric cookers are considered less dangerous. The magnetic field created by a working stove is harmless to healthy people if exposed to it for no more than 3 hours. The surface of the device does not heat up, so you can place food in a free place next to a boiling pan.

The surface of the device does not heat up

However, an induction cooker, like any electrical appliance, requires compliance with operating rules in order to avoid injury and breakdown.

1. Remove the dishes with care, avoiding touching the heating zone to avoid burns, since the heat does not dissipate immediately. For the same reason, it is not recommended to leave the dishes on the burner turned on unattended, since if the contents completely evaporate, the pan will overheat and you can get burned. It takes a short time for the glass ceramic surface to cool down.
2. It is necessary to use special cookware that matches the diameter of the burner. Can not use pans with deformed bottoms.
3. Do not allow moisture to get on the working surface of the stove.
4. The surface of the device can only be cleaned after disconnecting from the power supply.
5. Staying near a working induction cooker is contraindicated. people with pacemakers.
6. Follow standard safety precautions when working with electrical equipment.

Rules for caring for an induction hob

As a rule, the surface of an induction cooker is made of durable glass-ceramic material; it requires some maintenance.

1. To clean such a surface, it is best to use a separate soft sponge.
2. For heavy soiling, purchase a special glass ceramic scraper, but not steel wool.
3. As a detergent, choose special ones for such a surface. silicone based solutions, which create a protective film. As a last resort, you can use liquid agent for washing dishes, but avoid using powder formulations.
4. After washing the surface, wipe it dry with a soft cloth.
5. If necessary, it is best to wash the hob immediately after cooking.
6. Do not allow sugar and salt to come into contact with the glass-ceramic surface. If such granular substances get in, you should brush them off and wipe the surface.

The Electrolux induction hob has gained incredible popularity among professional cooks and ordinary housewives. This type of hob has many advantages, which we will consider in today’s review.

Electrolux is quite famous trademark. Country of origin: Sweden. Electrolux was founded back in 1919. Today it is one of the largest manufacturers professional equipment and household appliances.

Over the long period of its activity, Electrolux absorbed many companies, including Zanussi and AEG Hausgeräte GmbH. In this regard, the Swedish corporation formed the international companies Electrolux Group.

Over the long period of its activity, the corporation has managed to win the unshakable trust of users. The manufacturer adheres to one simple rule: to make equipment not just multifunctional, but also reliable.

Features of induction hobs

First, let's define what Electrolux induction hobs are? The essence of how induction cookers work is that the cookware is heated due to the influence of electromagnetic radiation. The induction coil is responsible for this process. Only the dishes in which eddy currents are formed are heated, while the hob itself remains at a constant temperature.

Advantages and disadvantages

It is worth remembering that every household appliance, no matter how innovative and high-tech it may be, has its pros and cons. Let's start with the advantages:

• Heating of the dishes occurs almost instantly;
• protection from children;
• The heating temperature can be adjusted very precisely;
• The power of the device can also be adjusted;
• temperature changes occur instantly;
• Unlike an electric stove, food dropped on its surface does not burn on an induction stove;
• does not dry out the air;
• automation of most processes;
• induction does not negatively affect the human body, which cannot be said about gas.

In families with small children, a built-in or independent induction cooker will come in handy. Due to the fact that its surface does not heat up, the child will not be able to get burned if accidentally touched.

Induction cookers have a high energy saving class, due to which these household appliances are considered quite economical.

Now let's look at the existing disadvantages of induction cookers:

1. Induction surfaces require the use of special cookware. Utensils made of cast iron, steel or enameled are suitable. If you try to cook food in aluminum cookware, then, unfortunately, nothing will come of it. However, this drawback is easily eliminated. You can purchase an induction disc that will be affected by induction. You can use any type of cookware with this device.
2. Repairing the stove will cost a pretty penny.

Perhaps this is where the shortcomings of modern induction surfaces end. As you can see, there are significantly more advantages.

General characteristics

Fundamentally new way heating dishes has appealed to modern consumers - it is really convenient and practical. With the help of electromagnetic radiation, eddy currents arise in the structure of the cookware, which directly proportionally affects the increase in its temperature. The hob itself consists of the following elements:

• power section;
• temperature sensor;
• body, which can be made of various materials;
• control Panel.

Using a simple example, you can calculate the amount of energy consumed and draw appropriate conclusions. It will take no more than 5 minutes for the hob to heat a saucepan of water. Taking into account the characteristics of the stove, the electricity consumption will be 0.35 kW per hour. This is approximately 6 times less than on a conventional electric stove.

It is also worth knowing that scanty electricity consumption is inherent in absolutely all models of induction cookers. The efficiency is 92%, which is quite impressive.

What points should you pay attention to?

The range of Electrolux induction cookers is very wide. There are different models with mostly different functions. In order for a modern consumer to decide which stove to choose for his kitchen, it is necessary to pay attention to the following nuances.

Number of burners

There are models with 2, 3 and 4 burners. Which slab should you choose? Everything is very simple. To decide, the first thing you need to do is look at your family. If the family consists of 4 or more people, then you will need a stove with 4 burners. If the family consists of 2 people, you can limit yourself to fewer burners.

It is also worth considering your personal preferences when choosing. If you love to cook, then you shouldn't skimp. By purchasing a 4-burner stove, you can cook various dishes at the same time and quickly.

It is also worth paying attention to additional functions. Some hobs have special heating zones that can be reduced or increased. This is very convenient if you use dishes various forms and sizes.

The manufacturer also offers a combined type of stove, where part of the burners is induction type, and the other part, for example, electric. In this matter, when choosing, it is best to be guided by personal preferences.

Control Panel

There are several types of control for induction surfaces:

• sensory;
• mechanical.

In the first case, on the central panel of the surface there is a touch display on which you can set special settings, modes, change the temperature, etc. Thanks to touch control, you can more accurately set temperature conditions.

The second type of control is suitable for lovers of the classics. In this case temperature control carried out using rotary-recessed switches.

Width

Before purchasing an induction surface, you need to decide on its dimensions, no matter whether it is a built-in panel or a separate one standing stove. You need to proceed from the area of ​​the room and kitchen furniture.

Color

Today there are a variety of color palettes hob surfaces - from standard dark to intricate pearlescent or matte. In this matter, it is best to proceed from personal preferences and desires.

For example, if the interior of your kitchen matches the high-tech style, then it is best to purchase a mirror, black or silver panel. To decide on a color, you need to consider the style of the kitchen and furniture.

Review of popular models

The following Electrolux stove models are very popular among consumers. These hobs will satisfy the needs of both ordinary housewives and professional chefs.

A classic hob with 4 heating zones and convenient touch controls. The glass ceramic coating is black. The power of the stove is 7400 W, and the dimensions are 5.5/59/52 cm.

This hob can cook your favorite dishes as quickly as possible. Responses to your commands for changing temperature conditions will be as fast as possible. There are also many additional functions available, including: intensive heating, timer, energy saving, child control, etc. Settings can be made via the central touch panel.

The hob has a white glass ceramic coating that looks great. This type of stove will suit almost any interior. 4 intense heating burners will help you prepare dishes in the shortest possible time. The power of the stove is 7400 W, and its dimensions are 5.5/5/52.

The induction surface can be controlled with just one touch. The DirectAccess control panel has an intuitive main menu that makes it easy to set the settings and select the features you need. Hot/cold control is carried out almost instantly.

This model has 4 heating zones. The glass-ceramic coating is black, and the power of the stove is 7400 W. Dimensions – 5.5/59/52. There are additional functions available that will make the cooking process much easier.

You should also additionally note the intensive heating mode, thanks to which food is cooked much faster than usual and useful minerals and vitamins are preserved in it. The central panel is located directly on the central part of the stove.

Controlling the stove is very simple: you just need to set the desired temperature regime on the touch panel and the necessary settings.

The black glass ceramic panel will blend into any kitchen interior, and 4 intense heating zones will help heat the dishes as quickly as possible. Device power – 7100 W. Its dimensions are 3.8/59/52 cm.

The DirectAccess touch control type will appeal to many. Thanks to a simple and clear menu, it is easy to set the necessary settings and lower or increase the temperature of the stove.

One burner can be adjusted in size, depending on the shape and volume of the cookware.

4 induction hotplates with a maximum connection power of 7400 W. Stove size – 5.5/57.6/51.6 cm. The black glass-ceramic coating has a stainless steel side frame.

Thanks to the convenient touch panel, you can select and set the appropriate settings for the main menu. The EHH 96340 XK hob will become an assistant in any kitchen, thanks to its wide functionality and available settings.

Bottom line

Indeed, Electrolux hobs are a great helper. Thanks to induction cookers, the process of cooking your favorite dishes can be made enjoyable and, most importantly, fast.

Name
Installation	independent	independent	independent	independent	independent
Dimensions (WxD)	59 x 52 cm	59 x 52 cm	59 x 52 cm	59 x 52 cm	57.6 x 51.6 cm
Installation dimensions (WxD)	56 x 49 cm	56 x 49 cm	56 x 49 cm	56 x 49 cm	56 x 49 cm
Switches	sensory	sensory	sensory	sensory	sensory
Panel material	glass ceramics	glass ceramics	glass ceramics	glass ceramics	glass ceramics
Price	from 31990 rub.	from 42990 rub.	from 26490 rub.	from 19990 rub.	from 26490 rub.
Where can I buy