• The gas convector emax GWH is compact, silent in operation, and has an attractive design.
• According to the manufacturer's documentation, gas convectors are used for heating production, warehouse, administrative and retail premises; residential premises in individual and low-rise apartment buildings, dachas, bathhouses, garages and even van bodies of special vehicles.
• Gas convectors emax GWH (air heaters) without a fan, are electrically independent and can be installed in rooms where there is no electrical network.
• A convenient regulator allows you to quickly set the desired room temperature in the range from +13 to +38 degrees.
• The gas convector emax GWH has closed chamber combustion. Air intake and combustion products are discharged through a coaxial gas exhaust pipe.
• The heat exchanger of the air heater is made of high quality enameled steel.
• A telescopic coaxial chimney pipe is included in the delivery package of the air heaters.
• The emax GWH gas convector is equipped with SIT gas fittings, which additionally guarantees product quality, reliability and durability.
• The combined gas valve EUROSIT 630 allows the convector to be used with both natural and liquefied gas. A trained specialist can replace it in 10-15 minutes necessary details and reconfigure the gas convector to a different type of gas. The kit for converting to another gas is purchased separately.
• The air heaters are adapted for operation in Russia and operate stably at low pressure of main and bottled gas.
• The factory warranty for the emax gas convector is 2 years.

Gas convector TMT GWH

• The gas convector TMT GWH is based on many years of experience operation in Russia gas convectors Em@x.
• The design of TMT GWH gas convectors is in many ways similar to the design of the Em@ax convector, but has a number of differences.
• The decorative casing has become more stylish, the size and location of the access door to the control unit have changed. The TMT line in its basic version is available with a casing in beige and white colors.
• The gas valve EUROSIT 630 has been replaced by gas valves MP 640 (for mains gas) and MP 630 (for liquefied gas) Italian company MP Gaz controls. Their advantage is the ability to work stably at ambient temperatures down to -30 degrees. Therefore, the gas convector TMT GWH is recommended for use in northern regions and in places where winter period the convector is used from time to time.
• Replacing the gas valve resulted in the TMT GWH convector being unable to be converted to another gas.
• Changes have been made to the convector design that ensure the temperature on the wall surface does not exceed 50 degrees, which, according to existing technical standards, allows the installation of the TMT GWH gas convector on wooden walls without additional insulation.
• The factory warranty for the gas convector TMT GWH is 2 years.

Specifications

Net weight

Model		emax (em@x)					TMT
		GWH-2a	GWH-2	GWH-3	GWH-4	GWH-5	GWH-2	GWH-3	GWH-5
Availability of fan/thermostat		No Yes)
Efficiency	%	85	80	85	85	86	80	85	86
Power	kW	1,95	2,5	3,5	4,7	5,0 (5,8*)	2,5	3,5	5,5 (5,8*)
Natural gas consumption	m3/hour	-	0,26	0,36	0,49	0,59	0,26	0,36	0,59
Liquefied gas consumption	kg/hour	0,154	0,197	0,28	0,371	0,458	0,197	0,28	0,458
Coaxial pipe diameter	mm	150
Diameter of gas supply fitting	inch	½
kg	11	20	26,5	29	33	17,1	22,5	28,7
Height	mm	500					545
Depth	mm	130	220				238
Width	mm	410	400	600	700	800	400	600	800
Price in warehouse in Moscow, for information **	rub.	No	12 100	13 200	13 550	14 400	12 100	13 200	14 400

Model

Thermal power kW

Heated area m 2

Air flow m 3 / h

Gas consumption

Email power W

Dimensions LxWxH mm

Weight kg

Appearance

natural m 3 / h

liquefied kg/h

GAS CONVECTORS Emax

GAS CONVECTORS “ROBUR” (Not supplied to Russia)

Currently, when solving space heating issues in the winter, many consumers prefer this option: gas heating convectors. The use of such devices allows you not to depend on central system heating, and they are often the only option for organizing heating in cases where installing a boiler is impossible for some reason.

Gas convector, intended for wall installation, used in various premises. For its operation, both natural and bottled gas can be used. Modern manufacturers offer models with various indicators power, the choice of which will depend, first of all, on the size of the room. Convectors can be effectively used for heating rooms whose area ranges from 15 to 70 square meters. m.

To install the convector, as a rule, one of the external walls is selected. The device is mounted at a height of 10-15 cm from the floor. Installation of the convector involves making a special hole in the wall through which a double, or coaxial, pipe will be discharged. It is included with the device. This design allows the combustion process to be isolated. Outside air, which is necessary for combustion, enters through one pipe, and combustion products are discharged outside the room through another. As a result, the safety of using the convector is ensured. To organize the heat exchange process, a heat exchanger is provided, which is located in the second circuit of the device. Various options convector designs assume that convection can occur naturally or forcefully. In the second case, a fan is used to organize air circulation. The room temperature is quickly set at a given level, and it is maintained automatically.

Modern gas convectors, being independent heating devices, can serve as a replacement for conventional heating systems. Since these devices do not have a water circuit, their operation does not involve the risk of freezing. Convectors are easy to install and dismantle, provide fast air heating, and are safe to use. No wonder that buy a gas convector many consumers decide today.

We invite you to consider Hungarian gas convectors (heaters) Em@x series GWH

The use of such heaters allows you to not depend on the central heating system, and they are often the only option for organizing heating in cases where installing a boiler is impossible for some reason.

The gas convector, designed for wall installation, is used in various premises. For its operation, both natural and bottled gas can be used. Modern manufacturers offer models with different power ratings, the choice of which will depend, first of all, on the size of the room. Emax heaters can be effectively used for heating rooms whose area ranges from 15 to 100 square meters. m.

Features and advantages of Emax convectors:

• Cost-effectiveness of convectors due to high efficiency and modern system automation that provides automatic control of room temperature
• Electrically independent
• Operational safety
• A convenient regulator that allows you to set the required room temperature from 13 to 38 degrees.
• The heat exchanger is made of high quality enameled steel
• Telescopic coaxial pipe chimney included in the delivery kit of the convector
• Italian gas fittings SIT, which guarantees reliability and long term operation
• The EUROSIT 630 gas valve allows the heater to be used with both natural and liquefied gas. The kit for converting to another gas is purchased separately.
• Possibility to increase the room temperature to the required level in the shortest possible time after switching on
• Factory warranty - 2 years

The lineup heaters Em@x GWH and prices:

Model	Thermal power kW	Heated area m3	Gas consumption		Dimensions D*W*H	Weight in kg	Price in RUB
			Nature	Liquefied
			m 3	m 3
	2,5	45	0,26	0,19	220*500*400	17	request
	3,5	70	0,36	0,28	220*500*600	22,5	request
	4,7	95	0,49	0,37	220*500*700	25,5	request
	5,0-5,8	110	0,59	0,45	220*500*800	28,7	request

To install the convector, as a rule, one of the external walls is selected. The device is mounted at a height of 10-15 cm from the floor. Installation of the convector involves making a special hole in the wall through which a double, or coaxial, pipe will be discharged. It is included with the device. This design allows the combustion process to be isolated. Outside air, which is necessary for combustion, enters through one pipe, and combustion products are discharged outside the room through another. As a result, the safety of using the convector is ensured. To organize the heat exchange process, a heat exchanger is provided, which is located in the second circuit of the device. Various design options for convectors suggest that convection can occur naturally or forcefully. In the second case, a fan is used to organize air circulation. The room temperature is quickly set at a given level, and it is maintained automatically.

Modern gas convectors, being independent heating devices, can serve as a replacement for conventional heating systems. Since these devices do not have a water circuit, their operation does not involve the risk of freezing. Convectors are easy to install and dismantle, provide fast air heating, and are safe to use. It is not surprising that today many consumers decide to buy a gas convector.

Gas convectorsemAx: GWH2, GWH3, GWH4, GWH5,TMTGWH 2,TMTGWH 3,TMTGWH 5

Manufacturer: Wamsler,SE Hungary

Today, when most of us began to take into account our funds, trying to find a solution to any issue as cheaply as possible, heating equipment (devices) have appeared, with which the technology of heating a room and obtaining heat does not require the creation of boiler houses and piping of a water heating system, no connection to power grid, and with all this, be it country house or a dacha, a bathhouse, a trade tent and pavilion, a garage, a warehouse or a gas filling station, an office, a cultural center or a production facility, the oxygen that we all need so much does not burn out in the room, and it is possible to regulate the temperature in each room or room. All that is needed is the presence of gas, natural (mains), or liquefied (cylinder) and the device itself.

What is a “gas convector”?
Externally, gas convectors are similar to water heating radiators. They are also installed on external walls of premises, usually under windows.
Almost any adult can independently install a convector and prepare it for startup. The entire installation comes down to making a hole in the wall and the sequence of actions outlined in the Installation Guide. The locations for the holes are marked according to a template, which serves as back wall convector on which everything else is mounted: a heat exchanger assembled with a gas burner unit (where preparation takes place gas-air mixture and its combustion), a system of 2 pipes “pipe in pipe” and a decorative grille.
You can install one or more gas convectors in your house, depending on the number of rooms in which you need to create comfortable conditions for living, working or storage. Convectors are mounted permanently on the wall of a heated room.

Let us first consider the option of heating from a liquefied gas cylinder, as the most autonomous, fairly inexpensive and fast option (in terms of installation, connection and receipt of such required heat).
For normal year-round heating of a room with an area of ​​up to 20 m2, you will need a convector with a power of 2.5 kW (a gas convector with a power of 5.5 kW is capable of heating rooms up to 45-50 m2). If heating is not carried out in winter, and the convector will “rest”, less power per 1 m2 is sufficient.
In addition to gas convectors, you will also need: a liquefied gas cylinder with a valve, a reducer, fittings for gas distribution (pipes or hoses, a pair of fittings, elbows and adapters), and possibly a place to store the cylinders.
pressure at outside temperature up to -30°Household liquefied gas cylinders are produced in volumes of 5, 12, 27 and 50 liters. For a sufficiently long heating period or, in the case of installing several gas convectors, it is most advisable to use 50-liter cylinders. These cylinders are always equipped with a valve. The remaining standard sizes of cylinders are produced either with a built-in valve device for a pressure regulator, the so-called “frog”, or with a valve that requires threaded connection with gearbox. From the point of view of safety and operational reliability, it is better to purchase cylinders with a valve and a threaded reducer RDSG 1-1.2. When heating in winter with the cylinder placed outside, it is recommended to use imported gearboxes, the quality of which has been tested in practice - guaranteed reliable operation in the required C range.
Cylinders can be installed inside the house in the kitchen, pantry, or on the terrace. However, from the point of view of safety, air purity and liberation useful areas, it makes sense to install cylinders with a capacity of 50 liters in special metal cabinets made of non-combustible materials (or a protective casing) outer wall Houses. However, no more than 2 cylinders of 27 liters each can be installed in the room (according to the standards). every. The placement of cylinders inside residential buildings with more than 2 floors is also not allowed according to existing regulations, the updating of which has just begun.
It is recommended to distribute gas from the cylinder to the convectors steel pipes. The pipe from the cylinder to the convector must be completely curved without corners or other threaded connections. In places where the pipe branches, the connection is made by welding.

IN last years Internal gas pipelines made of special reinforced material are becoming widespread. plastic pipe or copper. But in regulatory documents(SNiPakh, Gosgortekhnadzor Rules) these innovations have not yet been reflected. It is possible to connect the pipe to the gas convector using a flexible special gas hose. In this case, a tap must be installed between the pipe and the hose.
After installing the convector and checking by simply soaping the tightness of all gas joints, we start the convector. To do this, you don’t need to run to the store for matches, but just press 2 keys on the front panel of the convector, one of which opens the gas supply, and the second - piezo ignition. Turning the knob with numbers next to the keys is also simple, thus setting the desired temperature for further automatic maintenance.

How much will it cost you to install and operate gas convectors, for example using liquefied gas?
Consider the following two options for a summer residence:
- one 2.5 kW convector with a 50-liter cylinder placed on the terrace is installed in the house;
- two convectors are installed in the house - one with a power of 2.5 kW, the second - 3.5 kW with a 50 liter cylinder installed in a cabinet outside the house.

In the first case, you will have approximately the following costs:

(Perhaps gas prices are different today)

1. Equipment and materials:
Gas convector GWH2 with a coaxial set of pipes - 12,500 rubles;
50 l cylinder with valve - 1700 rubles;
Reducer RDSG 1-1.2 - 120 rubles; (Italian 350 RUR)
Steel pipe ¾ inches (8 meters) - 300 rubles;
Flexible eyeliner(50 cm) - 70 rubles;
Gas ball valve - 70 rubles;
TOTAL materials: 14,760 rubles.

2. Installation and commissioning:
Installation and configuration of the convector - 1800 rubles;
Installation of gas distribution - 2000 rubles;
Transport costs - 300 rubles.
________________________________________________________________
TOTAL: 18860 rubles
In the second case, the costs will be approximately 32,460 rubles.
Refilling a 50-liter cylinder costs 450...480 rubles.

The consumption of liquefied gas when operating a 2.5 kW convector in maximum heating mode is 0.19 kg/hour (0.26 m3/hour for natural gas). Thus, a 50-liter cylinder provides 150 hours of continuous operation at full power. Taking into account the inclusion of heating in spring and autumn periods and heating in economical mode on cool summer nights, a 50-liter cylinder is enough for one 2.5 kW convector for one season (May-September).
Everything that has been said also applies to convectors powered from the main (mains) gas, which is supplied to gas stoves in the kitchens. The fundamental difference is that the installation gas equipment and the installation of the internal gas network should be carried out only by certified specialists who have the necessary qualifications and experience working with this type heating equipment, the need to “tinker” with cylinders, and, of course, the cost. So, for example, with the current tariff for natural gas about 2 rubles per cubic meter, a 2.5 kW convector consumes, on average, 350...450 m3 of gas per year (at constant winter accommodation), which costs 700...900 rubles per year.

Convectors are quickly and easily dismantled within 10 minutes, which is very important in our conditions, for example, when preserving a summer house for the winter. To dismantle the convector, you only need to unscrew the threaded connection to the gas pipeline, unscrew the two mounting bolts and unscrew the 3 M6 nuts. Reinstallation the convector does not require the involvement of specialists and takes the same 10 minutes!
Convectors do not have a water circuit, so there is no problem of coolant freezing and damage heating system.
Gas convectors have the ability, in the shortest possible time after switching on, to raise the temperature in the room to the required level and maintain it automatically, without human intervention.
Convectors do not require power supply.

Convectors are very economical due to their high efficiency and modern automation system, which provides automatic control of room temperature.
Convectors are safe thanks to high quality protective automation.
Environmental cleanliness is another remarkable property of gas convectors. Convectors have a closed combustion chamber that is not connected to the heated room. Combustion air comes from the street, and combustion products are discharged there.
In conclusion, we note that gas convectors are not a panacea for heat shortages.
If your home already has a double-circuit gas boiler installed that provides heating and production hot water, then the use of gas convectors will be effective for heating new extensions, such as an attic, covered terrace, garage, etc. During the initial engineering arrangement of a house, in some cases a combination may be of interest electric water heater and heating systems based on gas convectors. If you only have the task of heating your home, then gas convectors are the most economical and comfortable solution. At minimum, compared to classical systems gas heating with a water circuit, with initial costs, gas convectors will allow you to maintain an individually set temperature in each room and ensure economical gas consumption.
But still, it is better to decide on home heating by first obtaining specialist advice.

Manufacturer:	"WAMSLER" SE, Hungary, with gas valve EUROSIT 630					"WAMSLER" SE, Hungary, with gas valve MP - 630(640)
	GWH2a(PB)auto	GWH2	GWH3	GWH4	GWH5	TMT GWH2	TMT GWH3	TMT GWH5
Rated power, kW	1,95	2,5	3,5	4,7	5,0-5,8*	2,5	3,5	5,8
Heated volume up to, cubic meters	45	56	74	95	100	56	74	up to 100
Gas consumption: natural, m 3 / h		0,26	0,36	0,49	0,59	0,265	0,360	0,590
liquefied, kg/h	0,154	0,197	0,28	0,371	0,458	0,197	0,280	0,458
Efficiency, %	85	80	85	85	86	80	85	86
Weight, kg	11	20	26,5	29	33	17,1	22,5	28,7
Height, mm	500	500	500	500	500	545	545	545
Length, mm	410	400	600	700	800	400	600	800
Width, mm	130	220	220	220	220	238	238	238
Price, rub. VAT included	12000	12500	13600	13950	14800	12500	13600	14800

Delivery

Articles

• When building a new country house, you have to think about heating the future home and decide how this will happen. There are several methods of heating a home and different types of heating boilers used for these purposes, about which
• Gas boilers are an ideal option for heating any room. They are very functional, economical and reliable. Modern models are equipped with many additional functions, such as electric ignition, maintaining a certain temperature, automatic
• Gas boilers remain the most common units for heating premises. To make the right choice, you need to get acquainted with the main characteristics of different types of these devices. Below you will find useful information
• A gas boiler is one of the most used types of heating appliances. If you decide to install it yourself, you should become familiar with the intricacies of this process. You will find useful information below
• The article describes the advantages, disadvantages, design and operating principle of long-burning solid fuel boilers. No brands or specific models are mentioned, only general information is given.
• Boilers are used to maintain the desired temperature in the room and for the constant availability of hot water. There are several types of these heating devices, each of which has its own characteristics of operation and application. In this article we will look at gas
• Description of the main positive characteristics of autonomous gas heating. The main advantages of using autonomous gas heating for heating homes.