Characteristics:
| Model | Price, rub | Volume(l) | G/P (kg) | Dimensions (mm) |
| BP-1.0 | 50050,00 | 1 000 | 2 500 | 3100x1560x900 |
| BP-1.6 | 58702,00 | 1 600 | 4 000 | 3700x1560x900 |
| BP-2.0 | 66066,00 | 2 000 | 5 000 | 3700x1850x1100 |
Concrete bucket vertical rotating BP:
The vertical rotating concrete bucket BP is used to supply concrete using a jib or tower crane to a great height. It is also used for supplying concrete directly from the mixer.
The main features of the buckets are low cost of work, versatility and ease of use.
The main difference from vertical buckets is that the swivel bucket has two positions.
When loading, when the tub is positioned horizontally, the process of transferring concrete from the mixer to the tub is significantly simplified ( bucket for concrete shoe).
In this case, there is no need to organize a pit or trestle for supplying the tub to the mixer, unlike a conventional vertical tub.
When supplying concrete, concrete bucket rotating assumes a vertical position, which significantly simplifies transportation by reducing the width dimensions. The tub is moved using a jib or tower crane, which allows you to significantly save on renting a concrete pump or concrete-feeding boom.
A rotating bucket for supplying concrete is optimal solution for construction sites where it is advisable to use inexpensive equipment for supplying concrete, which is operated by personnel who do not have special skills and approvals.
Concrete bucket vertical rotating BP filled with concrete from a mixer, manually or from a mobile concrete plant. After filling the tub, using a jib or tower crane, the tub is delivered to the ceiling, to the place of work. A convenient mechanism allows you to accurately dose the supply of concrete, preventing excess consumption and loss of concrete during work.
Concrete bucket vertical rotating BP allows you to produce monolithic works with the help of personnel who do not have special training. Enough induction training to start work, as opposed to using high-tech and expensive mechanization tools, such as a concrete pump.
When using buckets for concrete, the consumption of concrete due to losses during transportation is significantly reduced. Concrete bucket vertical rotating BP does not require special care after work, just rinse the equipment with water.
Please note that this website is for informational purposes only and under no circumstances does the information materials and prices posted on the website constitute public offer, determined by the provisions of Articles 435 and 437 of the Civil Code of the Russian Federation.
Cost, product availability and information about possible discounts check with our managers by calling the numbers or e-mail addresses specified in the contact information.
Conducting electrical or information networks can be produced different ways at the discretion of the user, but it is best to use special mounting devices. The company provides the user with special mounting trays with a lid that can accommodate a large number of conductors. This design not only provides hidden installation power lines, but also protects them from external influences. These structures can be used anywhere, from industrial areas of use to domestic and public buildings.
Installation of cable trays occurs on the surface, and any user is faced with the question of how to overcome turns and different angles premises. In a building for public and industrial purposes, the corners of the premises are mostly straight and amount to 90°. In this regard, the company has developed special external vertical turns with the help of which the user can perform various types of installation of corners.
Installation of external straight 90° turns is very simple, thanks to the special “female” and “male” connectors with which they are equipped, like all cable trays. When connecting the turning edges to cable trays, they need to be fastened with special bolts for more reliable fixation. It is very important that the user must place both ends suitable for turning at the same level. cable trays. If this condition is violated, then the result will be a poor fastening with a turn, which will also have an unattractive appearance due to the mismatch in level.
IEK Company does not recommend users to install direct rotation into two pre-installed cable trays. It is advisable to do the installation gradually, without this type of joint, then there will be no problems with leveling the two cable trays. Installation of direct rotation is carried out only due to the “mother” and “father” fasteners, without any additional fastening to the very surface. Thereby, external turns 90° can be quickly mounted/dismantled in different places when changing the layout of power lines. Straight outer turn made from the same material as cable trays, namely galvanized steel. The company invented a very good decision problems regarding the creation of turns used in the installation of power lines, which is widely used by users.
Rotary table horizontal vertical TSL series are intended for local processing, dividing, setting corners, boring, angular cutting and other similar work in conjunction with machines of the milling group. This type of table is specialized for performing where more measuring operations than the TS series tables. Design feature The advantage of these tables is that they can be used in both horizontal and vertical positions when working using the tailstock of the machine. Rotary tables for milling machines Designed for use as additional equipment on universal milling machines. The use of a rotary table allows you to successfully perform such operations as circular milling, drilling and machining holes, milling grooves and ledges, and other parts of the part through the required angular distances.
Horizontal-vertical rotary table TSL-160
Rotary milling table with horizontal and vertical mount. The diameter of the working surface of the table is 160 mm. The width of the keyway for fastening the table is 12 mm. The width of the keyway on the working surface of the table is 10 mm.
RUB 21,996-
Horizontal-vertical rotary table TSL-200
Rotary milling table with horizontal and vertical fastening. The diameter of the working surface of the table is 200 mm. The width of the keyway for fastening the table is 14 mm. The width of the keyway on the working surface of the table is 12 mm.
RUB 23,695-
Horizontal-vertical rotary table TSL-250
Rotary milling table with a diameter of the working surface of the table - 250 mm. The width of the keyway for fastening the table is 14 mm. The width of the keyway on the working surface of the table is 12 mm. Can be used in both horizontal and vertical positions.
RUB 26,995-
ROTARY TABLES HORIZONTAL TS (160-1250 mm).
| T.S. 160A |
T.S. 200A |
T.S. 250A |
T.S. 320A |
T.S. 400A |
T.S. 500A |
T.S. 630A |
T.S. 800A |
T.S. 1000A |
T.S. 1250A |
|
| Faceplate diameter, mm | Ø160 | Ø200 | Ø250 | Ø320 | Ø400 | Ø500 | Ø630 | Ø800 | Ø1000 | Ø1250 |
| KM2 | KM3 | KM4 | KM5 | KM6 | - | |||||
| Hole diameter, mm | Ø25x6 | Ø30x6 | Ø40x10 | Ø50x12 | Ø75x14 | |||||
| T-slot width, mm | 10 | 12 | 14 | 18 | 22 | |||||
| Angles of convergence of T-slots | 90° | 60° | 45° | |||||||
| Fastening groove width, mm | 12 | 14 | 18 | — | — | — | — | - | ||
| 1.5 | 1.75 | 2 | 2.5 | 3.5 | 4.5 | 5.5 | 5 | |||
| 1:90 | 1:120 | 1:180 | ||||||||
| Graduation | 360° | |||||||||
| Rotate the table with one turn of the worm | 4° (1" division) | 3° (1" division) | 2° | |||||||
| Minimum scale value | 10 " | |||||||||
| Reading accuracy | 80" | 60" | 30" | |||||||
| 100 | 150 | 200 | 250 | 300 | 550 | 700 | 1250 | 2000 | 3000 | |
| Weight, kg | 16.5 | 22.5 | 33.5 | 65 | 125 | 215 | 345 | 800 | 1300 | 1900 |
|
Price, rub. |
17 100 |
19 100 | 21 200 | 32 400 | 49 100 | 105 700 | 234 300 | 592 300 | 938 500 |
1572 000 |
DIMENSIONS OF ROTARY TABLES HORIZONTAL TS:
| TS160A | TS200A | TS250A | TS320A | TS400A | TS500A | TS630A | TS800A | TS1000A | TS1250A | |
| A | 260 | 290 | 330 | 410 | 530 | 640 | 820 | 1000 | 1170 | 1400 |
| B | 196 | 236 | 286 | 360 | 450 | 560 | 700 | 890 | 1080 | 1300 |
| C | 332 | 369 | 422 | 493 | 612 | 753 | 898 | 1080 | 1295 | 1420 |
| D | Ø160 | Ø200 | Ø250 | Ø320 | Ø400 | Ø500 | Ø630 | Ø800 | Ø1000 | Ø1250 |
| G | 12 | 14 | 18 | 22 | 22 | - | 22 | |||
| H | 75 | 80 | 90 | 110 | 140 | 158.5 | 160 | 215 | 250 | 283 |
| J | 12 | 14 | 18 | 22 | 30 | - | 30 | |||
| K | 76 | 91.25 | 102.5 | 128.5 | 180 | 230 | 295 | 364 | 364 | 487.5 |
| L | 194 | 211 | 241 | 273 | 337 | 393 | 468 | 535 | 654 | 690 |
| M | KM2 | KM3 | KM4 | KM5 | KM6 | - | ||||
| P | 27 | 27 | 30.5 | 44 | 60 | 65 | 68 | 76 | 106 | 116 |
| Q | 125 | 160 | 180 | 220 | 250 | |||||
| d | Ø25 | Ø30 | Ø40 | Ø50 | Ø75 | |||||
| h | 6 | 10 | 12 | 14 | ||||||
Rotary tables and accessories (made in Russia).
| 5030 |  |
5053 | |||
 |
5030 | |
 |
||
 |
5040 |  |
5055 | |
|
 |
5045 |  |
5057 | ||
 |
5050 | |
 |
5059 | |
 |
6130 | ||||
 |
5120 | ||||
ROTARY TABLES HORIZONTAL TS (1600-2500 mm).
TECHNICAL CHARACTERISTICS OF ROTARY HORIZONTAL TABLES TS:
| TS1600A | TS2000A | TS2500A | |
| Faceplate diameter, mm | 1600 | 2000 | 2500 |
| Diameter of through hole, mm | 100 | 120 | - |
| Diameter and depth of hole for centering, mm | 120x25 | 150x30 | - |
| T-slot width, mm | 22 | ||
| Angles of convergence of T-slots, degrees. | 22,5 | ||
| Worm and worm gear modules | 8 | ||
| Worm gear ratio | 1:120 | 1:180 | |
| Graduation of the entire table, degrees. | 360 | ||
| Rotation of the table with one turn of the worm, deg. | 3 | 2 | |
| Minimum scale value, min. | 10 | ||
| Indication accuracy, min. | 30 | ||
| Maximum workpiece weight, kg | 5500 | 8500 | 10000 |
| PRICES for rotary tables TS (1600-2500), rub. | 2 777 000 | 4 090 000 | 4 123 000 |
ROTARY TABLES HORIZONTAL-VERTICAL TSL (100 - 800 mm).
TSL
- TYPE 5057. WZK tailstock.
TECHNICAL CHARACTERISTICS OF ROTARY TABLES HORIZONTAL-VERTICAL TSL:
| TSL100 | TSL160 | TSL200 | TSL250 | TSL320 | TSL400 | TSL800 | |
| Faceplate diameter, mm | Ø100 | Ø160 | Ø200 | Ø250 | Ø320 | Ø400 | Ø800 |
| Center hole taper | KM2 | KM3 | KM4 | KM6 | |||
| Hole diameter, mm | Ø20x8 | Ø25x6 | Ø30x6 | Ø40x10 | Ø75x14 | ||
| 70 | 125 | 150 | 170 | 210 | 260 | 500 | |
| T-slot width, mm | 6 | 10 | 12 | 14 | 22 | ||
| T-slot convergence angles | 90° | 60° | 45° | ||||
| Fastening groove width, mm | 10 | 12 | 14 | 18 | 22 | ||
| Worm Gear Modules | 1 | 1.5 | 1.75 | 2 | 2.5 | 3.5 | 5.5 |
| Worm gear ratio | 1:72 | 1:90 | 1:120 | ||||
| Graduation | 360° | ||||||
| Handwheel scale | 2" | 1" | |||||
| Minimum scale value | 10" | ||||||
| Reading accuracy | 120" | 80" | 60" | ||||
| 20 | 100 | 150 | 200 | 250 | 300 | 1500 | |
| 10 | 50 | 75 | 100 | 125 | 150 | 750 | |
| Weight, kg | 7 | 23 | 31.5 | 46 | 77 | 150 | 1150 |
| PRICE for rotary tables TSL, rub. | 19 100 | 22 000 | 23 700 | 27 000 | 42 500 | 62 500 | 710 000 |
ROTARY TABLES HORIZONTAL-VERTICAL T13 500B, Ø500 mm.
Rotary tables horizontal-vertical series T13 designed for dividing, circular cutting, setting angles, boring, local processing and similar work in conjunction with milling machines. This type of table is specially designed for performing machine operations with great opportunities measurements than TS series tables. The base allows the tables to be used in a vertical position for work using the tailstock.
ADDITIONALLY (not included) the table can be equipped with:
- TYPE 5055. FL flange for mounting a spiral chuck.
- TYPE 5054. DK11 spiral chuck.
- TYPE 5053. DP dividing disc, allowing the operator to accurately divide a circle by rotating 360°, in any proportions and at any angle.
TECHNICAL CHARACTERISTICS OF ROTARY TABLES HORIZONTAL-VERTICAL T13500B:
| T13500B | |
| Faceplate diameter, mm | Ø500 |
| Center hole taper | KM4 |
| Hole diameter, mm | Ø50x15 |
| Center height in vertical position, mm | 286 |
| T-slot width, mm | 20 |
| Angles of convergence of T-slots | 45° |
| Worm Gear Modules | 3.5 |
| Worm gear ratio | 1:90 |
| Graduation | 360° |
| Rotate the table one turn of the worm | 4° |
| Minimum scale value | 10" |
| Reading accuracy | 60" |
| Max. bearing load in horizontal position, kg | 550 |
| Max. bearing load in vertical position, kg | 275 |
| NET / GROSS weight, kg | 225 / 260 |
| Package size, mm | 955x690x337 |
| PRICE for table T13500B, rub. | 130 200 |
DIMENSIONS OF ROTARY TABLES HORIZONTAL-VERTICAL T1350B:
TILTING ROTARY TABLES TSK (160 - 400 mm).
Rotary tilting tables series TSK Designed for dividing, circular cutting, setting angles, boring, local processing and similar work in conjunction with milling machines. This type of table is specifically designed for machine operations with greater measuring capabilities than the TS or TSL series tables. The base allows the tables to be used in a vertical position for work using the tailstock.
ADDITIONALLY (not included) the table can be equipped with:
- TYPE 5055. FL flange for mounting a spiral chuck.
- TYPE 5054. K11 spiral chuck.
- TYPE 5053. DP dividing device that allows the operator to accurately divide the disc during 360° rotation, in any proportions and at any angles.
TECHNICAL CHARACTERISTICS OF TSK TILTING ROTARY TABLES:
| TSK160 | TSK200 | TSK250 | TSK320 | TSK400 | |
| Faceplate diameter, mm | Ø 160 | Ø 200 | Ø 250 | Ø 320 | Ø 400 |
| Center hole taper | KM2 | KM3 | KM4 | ||
| Hole diameter, mm | Ø 25x6 | Ø 30x6 | Ø 40x10 | ||
| T-slot width, mm | 10 | 12 | 14 | ||
| Worm Gear Modules | 1.5 | 1.75 | 2 | 2.5 | 3.5 |
| Fastening groove width, mm | 12 | 14 | 18 | ||
| T-slot convergence angles | 90° | 60° | |||
| Worm gear ratio | 1:90 | ||||
| Graduation | 360° | ||||
| Tilt angle | 0 - 90° | ||||
| Handwheel scale | 1" | ||||
| Minimum scale value | 10" | ||||
| Reading accuracy | 2" | ||||
| Max. bearing load in horizontal position, kg | 100 | 150 | 200 | 250 | 300 |
| Max. bearing load in vertical position, kg | 50 | 75 | 100 | 125 | 150 |
| Weight, kg | 36 | 57 | 80 | 135 | 280 |
| PRICE for rotary table TSK, rub. | 52 000 | 56 400 | 65 100 | 88 300 | 131 000 |
DIVIDER DISCS DP for tables TS, TSL, TSK.
Applicability of disks:
|
Applicability |
Discs |
||
| 5 100 | |||
|
TS160A, TS200A, TS250A, TS320A |
|
6 600 |
|
|
TS400A |
A: 34, 37, 38, 39, 41, 43, 44, 50, 52, 56, 61 |
9 800 |
|
|
TS500A, TS630A, TS800A, TS1000A |
A: 33, 34, 37, 38, 39, 41, 43, 44, 50, 52, 56, 61 |
14 800 |
LATHE CHUCKS PS3 for mounting on rotary tables.
The chucks are equipped with straight and reverse hardened jaws, a key and bolts for fastening.
For installation on tables, adapter flanges TYPE 5055 FL are required.
|
Designation |
D, |
D1, |
D2, |
D3, |
H, |
H1, |
h, |
Max. dia. |
Mmax. permissible |
Weight, |
||
|
DK11-80(PS3-80) |
6 900 |
|||||||||||
|
DK11-100 ( PS3-100) |
||||||||||||
|
DK11-125(PS3-125) |
7 560 |
|||||||||||
|
DK11-160(PS3-160) |
11 400 |
|||||||||||
|
DK11-200(PS3-200) |
17 800 |
|||||||||||
|
DK11-250(PS3-250) |
21 200 |
|||||||||||
|
DK11-315(PS3-315) |
40 600 |
|||||||||||
|
DK11-400 (PS3-400) |
58 200 |
FLANGES FOR MOUNTING LATHE CHUCKS FL on rotary tables TS, TSL, TSK.
Correspondence of the diameter of lathe chucks to flanges:
|
Flange |
|||||||
|
Faceplate diameter, mm |
|||||||
|
Ammo |
DK11-80 |
DK11-125 |
DK11-160 |
DK11-200 |
DK11-250 |
DK11-315 |
DK11-400 |
|
Chuck diameter, mm |
|||||||
|
1 900 |
3 100 | 3 400 | 5 100 | 9 100 | 10 200 | 12 100 |
REAR STOCK ADJUSTABLE WZK.
Adjustable rear headstocks WZK Designed for use with vertical rotary tables. They are used to hold and center cylindrical and other parts during machine processing. The height of the center and the angle of inclination can be changed and adjusted as needed. The design allows the center to be pulled inward to perform part changes and repeat the operation. For safe operation, the center is fixed with a clamping handle.
TECHNICAL CHARACTERISTICS OF WZK TAILSTOCKS:
|
Applicability |
||||||
|
Height from base MIN |
||||||
|
Center cone |
||||||
|
Fastening groove width, mm |
||||||
|
Center inclination angle, degrees. |
||||||
|
Center displacement, mm |
||||||
|
Dimensions, mm |
||||||
|
6 500 |
6 900 |
7 600 |
||||
|
Designation |
||||||||||||||||
REAR STOCK UNADJUSTABLE WZ and TSL400.
Rear headstocks WZ and TSL400-2 Designed for use with vertical rotary tables. They are used to hold and center cylindrical and other parts during machine processing. The design allows the center to be pulled inward to perform part changes and repeat the operation. For safe operation, the center is fixed with a clamping handle.
TECHNICAL CHARACTERISTICS OF WZ TAILSTOCKS:
LONGITUDINAL AND TRANSVERSE TABLE MG-2A with a rotating base.
Longitudinal-transverse table with rotating base MG-2A is a multifunctional accessory for a wide range of applications, mainly on milling, drilling and other machines. The use of longitudinal and transverse movement together with rotation around the base makes it easier and faster to process parts.
l
TECHNICAL CHARACTERISTICS OF TABLE WITH ROTARY BASE MG 2A:
|
MG-2A |
|
|
Table size, mm |
|
|
Amount of longitudinal movement of the table, mm |
|
|
Amount of lateral movement of the table, mm |
|
|
T-slot width, mm |
|
|
Distance between T-slot, mm |
|
|
Minimum readable dial value |
|
|
Maximum permissible weight of the workpiece relative to the center of the table, kg |
|
|
Maximum permissible force relative to the center of the table, N |
|
|
Surface deviation along the length of the table, mm |
|
|
Permissible deviation of perpendicularity, mm |
|
|
Parallelism of the table surface to the base surface, mm |
|
|
Permissible deviation when rotating the table 0-360°, mm |
|
|
NET WEIGHT, kg |
|
|
GROSS weight, kg |
|
|
Packaging dimensions, mm |
|
|
40 100 |
ROTARY TABLES HORIZONTAL-VERTICAL TK13EL, CNC.
Horizontal-vertical tables with a through hole in the spindle series TK13EL CNC perfect solution for using them on CNC milling machine tools and machining centers. They are used in combination with the machine's CNC controller or with an independent controller on non-CNC machines. To ensure work with widespread use There is a faceplate with a through hole, as well as other devices that allow you to fix the part between the table and the tailstock. With their help, operations can be performed particularly accurately. The presence of a through hole in the spindle allows the use of hydraulic (pneumatic) powered collets and chucks when processing long shafts and other products.
TECHNICAL CHARACTERISTICS OF TK13EL, CNC:
|
TK13200EL |
TK13250EL |
TK13315EL |
|
|
Faceplate diameter, mm |
|||
|
Center height, mm |
|||
|
Diameter of passage hole, mm |
|||
|
Width of the fixing groove-key, mm |
|||
|
Width of fixing T slot, mm |
|||
|
Worm gear ratio |
|||
|
Gear ratio |
|||
|
Maximum rotation speed, rpm |
|||
|
Table rotation angle per pulse |
|||
|
Servo drive power, kW |
|||
|
Servo drive torque, Nm |
|||
|
Division accuracy |
|||
|
Positioning stability |
|||
|
Clamping force at oil pressure 15x10 5 Pa, Nm |
|||
|
Clamping force at air pressure 5x10 5 Pa, Nm |
|||
|
Max. weight of the workpiece in a horizontal position, kg |
|||
|
Max. workpiece weight in vertical position, kg |
|||
|
Maximum torque, Nm |
|||
|
NET WEIGHT, kg |
MAIN DIMENSIONS OF ROTARY TABLE TK13200L, TK13250L, TK13315K:
|
TK13200EL |
||||||||||||||
|
TK13250EL |
||||||||||||||
|
TK13315EL |
|
TK13200EL |
|||||||||||
|
TK13250EL |
|||||||||||
|
TK13315EL |
Production time up to 14 days.
Rotary mobile magnetic marker board on metal frame, powder-coated to match the color of aluminum. It is possible to change the radius of the board's tilt.
The surface is designed for writing information using a specialized marker for whiteboards.
Due to the magnetic surface, information can be attached to the floor board using magnets.
The marker coating of the rotating board allows you to write with whiteboard markers, and erasing does not leave marks. You can display the image from the projector on the surface.
Today, one of the necessary and modern attributes of an office or educational institution are mobile turning boards of our production. This is a wonderful and multifunctional visualization tool that has proven itself:
The popularity of mobile rotating boards made using patented BoardSYS technologies can be explained simply - these products are mobile and made from 100% environmentally friendly materials. The board is presentable appearance and ease of operation. Due to the rotation function effective area floor board doubles in size. The surface of the mobile rotating board is magnetic marker, which allows you to use dry erase markers (Green, Red, Blue, Black) or magnets for writing. The transition from one surface to another is accomplished simply by turning the board.
It is not surprising that the BoardSYS mobile rotating board is often a relevant item that can help in the following areas:
- allows you to complete the visual part of your report in advance and still have free work surface;
- helps organize and optimize work in the office or classroom;
- present information clearly;
- draw attention to important messages.
Mobile rotating BoardSYS boards are equipped with a convenient tray (along the entire length of the board) for markers and crayons, as well as a mounting kit.
All products are tested for compliance with European environmental safety standards.
We offer our product packaging service for greater safety of the goods during transportation through a transport company.
- Supplied with a tray (along the entire length of the board), as well as fittings for mounting to the wall and an installation diagram
- Coating steel sheet- Production: South Korea.
- Metal and aluminum profile.
