Sliding doors, having a number of features, compared to classic swing doors, have a significant drawback. They do not guarantee a tight fit of the canvases to each other; they form gaps both under and above them. To visually cover cracks, protect against dust, insects, and provide partial insulation, brush seals (flashings) are used.

We will briefly look at the types of brush seals for sliding doors, as well as cases when their use is advisable. On what types of sliding plastic doors or windows, in addition to interior ones, can they be used?

What are they made of?

The brush seal (flap) is an ordinary brush, the bristles of which are made from a variety of materials, depending on the flooring, window sill material, operating conditions.

Most often, synthetic fibers are used to make brush seals: nylon, polyethylene, silicone, synthetic rubber, natural bristles or metal wire.

The basis for its production can be polymer woven materials, rigid bases - plastic, rubber, metal.

Typically, the accessory is mounted at the bottom of sliding plastic doors (windows), covering the gap formed at the bottom of the door when top position rollers along which the canvas slides. When it is used for "French" windows that do not have plastic frame, it can be located around the entire perimeter of the glass, be transparent (silicone) and act as a strip.

What is it used for?

Most designs of sliding plastic doors (windows), with rare exceptions (lift-and-slide doors - like in buses), do not ensure an absolutely tight fit of the panel to the door (window) frame, there is a need to partially eliminate this drawback.

The use of traditional rubber (silicone) seals is impossible due to the high coefficient of friction of these materials and rapid failure, difficulty in opening doors, and damage to the floor covering. A completely different matter is a soft, dense, multi-row brush that easily glides over any surface, bridging the gap that forms.

But the brush does not guarantee insulation, elimination of odors if the structure is installed in the kitchen, or from frost and drafts if it is equipped with such a cover. french window leading to the terrace. But the cover reliably protects the room from the penetration of dust, insects, and raindrops knocking on the window.

Depending on whether brush seals are used on plastic or wooden sliding doors - external, leading to the street or internal - interior, the structure, height, thickness of the material from which they are made differs.

For external street brush seals used for insulation, porous rubber is used, which has a very low thermal conductivity coefficient. Thanks to the large width of the strip, several rows of bristles, and their close fit to each other, fairly effective protection against heat loss in the room and insulation are provided.

When brush strips are used in interior sliding doors wooden structures, or for sliding wardrobes, where the main purpose of use is not insulation, but the prevention of dust (liners). They do not have such a dense structure (2-3 rows of bristle tufts).

Brush strips differ in design. For wooden and metal sliding doors, they are often made on an adhesive base, which allows for quick installation and, if necessary, quick replacement.

For plastic sliding windows the bristles are mounted on a metal frame with a profile section, which is simply inserted into the appropriate groove plastic products. For each door (window) manufacturer, only its “branded” profile is used. Such products are not interchangeable.

For glass sashes, silicone (transparent) brush seals are used, which have a U-shaped profile, placed on the end of the glass, previously degreased and moistened with water.

When dry, they are firmly fixed.

Let's sum it up

The use of brush seals is a necessary measure, which is caused by imperfections in the design plastic windows, when cheap structures are used that do not provide complete sealing. They do not prevent heat loss, drafts, or the spread of odors. But they effectively cope with the task of protecting the premises from dust and the penetration of insects from the street. The use of such an accessory is permissible only on verandas and terraces that are not heated. If you use them to insulate warm rooms, this will entail an unjustified waste of thermal energy due to high losses through the loose structure.

2038 10/06/2019 5 min.

Sliding interior doors compared to swing structures have one significant drawback. It consists in the fact that it is not possible to ensure a tight and reliable fit of the canvases relative to each other.

Description

A brush seal is a product that looks like a regular brush. To obtain villi they can use various material. In this case, everything is determined by the installation location of the strip - a door between rooms, a garage door or a window. The brush seal can be of several types. It all depends on what material is used in the production process:

• nylon;
• polyethylene;
• silicone;
• rubber;
• made from natural bristles or metal wire.

In order to select right size sealant, it is worth understanding what exist

Most often, installation of such a product is carried out at the bottom of sliding interior door structures (installation of butterfly hinges on interior doors. Their task is to close the gaps that arise at the bottom of the doors, but only if the rollers are concentrated in the upper part. Still available for sale find a brush seal with a self-adhesive base. As a rule, silicone is used to make it. It is transparent, and its installation is carried out around the entire perimeter door design. Thus, he will be able to fully carry out the tasks assigned to him.

Here's how to choose the right seals for interior doors in the groove, you can understand by looking at the contents of this

Taking into account whether on wooden or plastic doors Whether the brush seal is installed externally or internally, its height, structure, and thickness of the material used to produce it may vary.

If it is necessary to install a brush seal, then porous rubber is used. It has a low thermal conductivity coefficient. Since the stripes of this material are large, the bristles are arranged in several rows. They fit tightly together, resulting in effective protection against heat loss in the room. Also, such products are characterized by high thermal insulation rates.

If you install a flashing for interior door structures sliding type and made of wood, then the main task of the products in question is not only insulation, but also to prevent dust and cold air from leaking into the room. They are not characterized by a dense structure. There are 2-3 rows of bristle tufts in total. The same ones are suitable for glass.

For sliding doors made of PVC, the bristles are installed on metal carcass. It is characterized by a profile section. The metal lathing is simply inserted into a suitable groove in the plastic products. For a specific door structure manufacturer there is a specific suitable profile. Such products are not interchangeable.

If it is necessary to install a seal for glass sashes, then silicone brushes are used for these purposes. They must have a U-shaped profile. It is put on the end of the glass. In this case, it must be pre-degreased and moistened with water.

Features of installation work

Installation in groove

The process of installing a seal in a groove is not difficult; all work can be performed by a person who does not have the proper experience. The most difficult thing you will have to face is trimming the product in the corners of the door structure. Although, if you approach the matter responsibly, then such a problem will not arise. The seal, which has a special protrusion with a brush on the back side, is very simply pressed into the groove.

Installing a brush door seal

When installing the seal in this way, it is necessary to take into account the ability of silicone to stretch. But when installing it on a door structure, this is simply impossible. It must be taken into account that if the product stretches, it can just as easily return to its shape. So, during the installation of such products, they do not need to be stretched, but rather compressed. There is one more point that must be taken into account when installing the seal in the groove. Its pruning remains quite difficult. This will have to be done after the product is installed in the groove.

And this is what a magnetic seal looks like for front door, and how it can be installed is indicated

Much easier installation brush seal, if it has a self-adhesive backing. In addition, this installation option, compared to the previous one, does not require compliance important nuances. The most important condition is a clean surface of the door in the place where the brush product will be installed. To do this, it is necessary to remove dust, dirt and degrease. Only then is it allowed further actions. It may also be useful for you to find out which one is best suited for plastic windows.

Installing a self-adhesive seal

Now you can remove it from the seal protective film. But not all of it, but 10 cm. Glue the freed part, while making sure that the product does not stretch. When the first part of the seal is pressed tightly against the door structure, you can remove the protective film completely and stick it to the door again. At the same time, carefully press the product around the entire perimeter. Glue the seal all the way to the bottom of the door. Cut off the excess product with a knife.

The door brush seal is a unique product. The fact is that it can be used for doors various designs. In addition, brush seals are perfectly mounted on doors made of metal, wood and plastic. The installation process is simple and quick. But the installation method is determined taking into account what type of seal is used. If the installation is carried out correctly, it is possible to protect the room from extraneous sounds, odors and the penetration of cold air.

So it’s worth looking at what it is and how to work with it.

Strip cheeks are widely used today, and they are used to solve both industrial problems and for home and office needs. Here are the main applications of brush seals, among many possible ones:

Sealing door clearances various options execution.

Sealing of all types of gates.

Movement orientation and positioning.

Transportation.

Protection and shielding.

Framing and bridging gaps.

Cleaning and striping.

Cleaning and surface treatment.

Polypropylene (length 3000mm)

prices from 03/22/2019

h, F or Y) Brush without profile

15 mm 450 rub./m. 300 rub./m.h-profile F-profile

25 mm 460 rub./m. 310 rub./m.

35 mm 530 rub./m. 380 rub./m.

45 mm 550 rub./m. 400 rub./m.

55 mm 570 rub./m. 420 rub./m.

65 mm 630 rub./m. 480 rub./m.

75 mm 650 rub./m. 500 rub./m.

85 mm 680 rub./m. 530 rub./m.

95 mm 1070 rub./m. 920 rub./m.Y -profile

105 mm 1130 rub./m. 980 rub./m.

115 mm 1180 rub./m. 1030 rub./m.

125 mm 1300 rub./m. 1150 rub./m.

135 mm 1370 rub./m. 1220 rub./m.

145 mm 1540 rub./m. 1390 rub./m.

155 mm 1660 rub./m. 1510 rub./m.

Our prices for standard brushes made of high quality

Nylon (Germany) (length 3000mm)

prices from 03/22/2019

Bristle height Brush with profile ( h, F or Y) Brush without profile

15 mm 740 rub./m. 590 rub./m.h-profile F-profile

25 mm 800 rub./m. 650 rub./m.

35 mm 880 rub./m. 730 rub./m.

45 mm 990 rub./m. 840 rub./m.

55 mm 1070 rub./m. 920 rub./m.

65 mm 1110 rub./m. 960 rub./m.

75 mm 1130 rub./m. 980 rub./m.

85 mm 1190 rub./m. 1040 rub./m.

95 mm 1270 rub./m. 1120 rub./m.Y -profile

105 mm 1330 rub./m. 1180 rub./m.

115 mm 1400 rub./m. 1250 rub./m.

125 mm 1500 rub./m. 1350 rub./m.

135 mm 1670 rub./m. 1420 rub./m.

145 mm 1740 rub./m. 1590 rub./m.

155 mm 1860 rub./m. 1710 rub./m.

Advantages when using strip brushes

Reducing space heating/cooling costs.

Almost all types of gates and doors have gaps between moving parts (without it their operation would be difficult). This gap allows warm or cold air to freely penetrate into the room. Large warehouses and industrial premises with a large surface area of ​​gates and doors. It is necessary to spend significant amounts of money on heating and air conditioning such premises

After installing strip sealing brushes, this problem is solved. Sealing brushes are an excellent barrier to heat loss. The seal will help reduce losses due to air leakage by up to 98%. It also helps to retain heat by installing strip brushes on industrial ovens, improving their work

Barrier to snow, dust and debris.

By installing sealing brushes on gates and doors, you will significantly reduce the penetration of dust and debris into the room. In addition, with the help of such seals you can protect moving parts of machines from penetration. different types contamination, which can prevent shutdowns and costly repairs.

Wear resistance, flexibility and soft material pile.

Strip brushes are made of nylon and polypropylene High Quality and increased wear resistance, which guarantees long term service, even with intensive use, and they can be used on any surface without fear of damaging it. Compared to rubber and vinyl seals, brushes have greater flexibility, so they come into contact with the surface much more closely. uneven surfaces. From the above it follows that sealing brushes are ideal for working on surfaces with uneven surfaces.

Noise insulation.

Sealing brushes are an excellent barrier to noise in test areas, production halls or just a noisy street.

Resistant to wide range temperatures

On request it is possible to produce strip brushes from heat-resistant nylon. Such seals will retain their properties at temperatures from -50°C to +200°C.

Protection against pests.

Strip brushes will reliably protect food warehouses from the penetration of small insects, and horsehair brushes will repel rodents.

Protection from sunlight penetration.

Sealing brushes have dense enough bristles to prevent sunlight from entering through the gaps in door leaf or protective covers of equipment, while performing reliable protection photosensitive elements.

Before using the services of our online store www.site, please read this Agreement carefully.

This agreement, hereinafter the “Agreement,” is concluded between the online store www..site), hereinafter the “Online store” or “Site,” and the user of the online store services, hereinafter the “Buyer,” and determines the conditions for purchasing goods through the Site.

1. About the activities of online stores in Russian Federation.

Legal relations of purchase and sale in the Russian Federation are regulated by the Civil Code of the Russian Federation (paragraph 2 “Retail purchase and sale”, Chapter 30). By virtue of clause 3 of Art. 492 of this Code, the provisions of the Law of February 7, 1992 No. 2300-1 “On the Protection of Consumer Rights” apply to relations under a retail purchase and sale agreement with the participation of a citizen buyer not regulated by the Civil Code. Article 26.1 of the said Law (Article 26.1 was introduced into the Law by the Federal Law of the Russian Federation of December 21, 2004 No. 171-FZ, which entered into force on January 9, 2005) establishes that a retail purchase and sale agreement can be concluded on the basis of familiarization consumer with a description of the goods proposed by the seller through catalogs, prospectuses, booklets, photographs, means of communication (television, postal, radio and others) or other means that exclude the possibility of the buyer directly familiarizing himself with the goods or a sample of them when concluding an agreement (remote method of selling goods).

Online trading falls into this category, since when ordering a product via the Internet, the buyer does not have the opportunity to directly familiarize himself with the product itself or its sample.

This type of trade is regulated on the basis of the Rules for the Sale of Goods remotely, established by Decree of the Government of the Russian Federation of September 27, 2007 No. 612. The norms of the above legislative acts apply to the purchase and sale of goods through online stores without restrictions.

The sale of goods through an online store occurs on the basis of a retail sales contract concluded between the seller of the goods and the buyer. In accordance with paragraph 2 of Art. 432 of the Civil Code of the Russian Federation, the conclusion of such agreements occurs through the sending of an offer (offer to conclude an agreement) by one of the parties and its acceptance (acceptance of the offer) by the other party. Sentences containing everything essential conditions contracts that can be accepted by anyone who responds are recognized public offer in accordance with Art. 437 Civil Code of the Russian Federation.

Similarly, an offer of goods on a website on the Internet addressed to an indefinite number of persons is recognized by the current legislation of the Russian Federation as a public offer (clause 1 of Article 494 of the Civil Code of the Russian Federation), if such an offer contains all the essential terms of the retail purchase and sale agreement (name of the product, price per unit of goods, direct offer to purchase goods).

In accordance with the all-Russian classifier of species economic activity OK 029-2001, approved by Decree of the State Standard of November 6, 2001 No. 454-st, the sale of goods via the Internet is retail trade carried out through tele-shops and computer networks(OKVED code 52.61.2).

Online stores must provide the following information on the website in a form accessible to consumers:

• offer (conditions for the sale of goods)
• a set of information for consumers (observance of rights to information about the product, manufacturer, seller), certificates, technical documentation, etc., copies of licenses (if the activity is subject to licensing).

The seller's obligations to transfer the goods to the buyer arise from the moment he receives the corresponding message from the buyer about the intention to conclude an agreement for the purchase of goods (acceptance).

Buyer's acceptance is an application in which the potential buyer of the goods must indicate the following:

• name and address of the seller,
• your last name, first name and patronymic (or another person who is the recipient of the goods),
• the address to which the goods should be delivered,
• name of the product, article number, brand, variety, number of items included in the package of the purchased product, price of the goods,
• type of service (if provided), time of execution and cost,
• buyer's obligations.

The online store (seller of the goods) is obliged to deliver the goods within the period established by the contract to the place specified by the buyer, and if one is not named, to the citizen’s place of residence (Clause 1 of Article 499 of the Civil Code of the Russian Federation). In order for a retail purchase and sale agreement to be considered fulfilled, it is not necessary to transfer the goods directly to its buyer. In the absence of a buyer, the goods can be transferred to any person who presents a receipt or other document indicating the conclusion of an agreement or registration of delivery of goods (clause 2 of Article 499 of the Civil Code of the Russian Federation).

Ownership rights to goods under contracts that include a condition for their delivery by the seller are transferred from the seller to the buyer at the moment the goods are delivered to the buyer.

The possibility of consumer refusal of the product is stipulated in paragraph 4 of Art. 26.1 of the Law “On Protection of Consumer Rights”. The buyer has the right to refuse the goods at any time before its transfer, and after the transfer of the goods - within 14 days.

Return of a product of proper quality is possible if its presentation, consumer properties, as well as a document confirming the fact and conditions of purchase of the specified product are preserved. The consumer’s absence of a document confirming the fact and conditions of purchase of the goods does not deprive him of the opportunity to refer to other evidence of the purchase of goods from this seller.

At the same time, the consumer does not have the right to refuse a product of proper quality that has individually defined properties if the specified product can be used exclusively by the consumer purchasing it.

If the consumer refuses the goods, the seller must return to him the amount of money paid by the consumer under the contract, with the exception of the seller’s expenses for delivery of the returned goods from the consumer, no later than thirty days from the date the consumer submits the corresponding demand (if an examination is necessary - within 40 days ).

In case of exchange and return, the shipping cost is paid by the Client. If you received a low-quality product or were delivered something other than what you ordered, the cost of return is paid by the online store.

If disputes arise regarding the quality of the goods or the reasons for the occurrence of defects in the goods, the seller accepts the goods poor quality from the buyer and conducts an examination. The buyer has the right to participate in checking the quality of the goods and challenge the examination conclusion in court.

2. Basic provisions

2.1. This Agreement is concluded between the Buyer and the online store at the time of placing an order. The Buyer confirms his agreement with the terms established by this Agreement by making an application to purchase goods when placing an order or registering on the Site.

2.2. This Agreement, as well as information about the product presented on the Site, is a public offer in accordance with Article 435 and Part 2 of Article 437 of the Civil Code of the Russian Federation.

2.3. The provisions of the Civil Code of the Russian Federation on retail purchase and sale(§ 2 Chapter 30), as well as the Law of the Russian Federation “On the Protection of Consumer Rights” dated 02/07/1992 No. 2300-1 and other legal acts adopted in accordance with them.

2.4. The buyer can be any individual or entity, capable of accepting and paying for the goods ordered by him in the manner and under the conditions established by this Agreement.

2.5. The online store reserves the right to make changes to this Agreement without notice.

2.6. This Agreement should be considered as published on the Site and should be applied and interpreted in accordance with the laws of the Russian Federation.

3. Product information and warranty

3.1. At the Buyer’s request, the online store manager is obliged to provide (by phone, via Skype or via Email) Additional information, necessary and sufficient, from the Buyer’s point of view, for him to make a decision to purchase the product.

3.2. The price of the product indicated on the Site is a reference and may be changed. Online store unilaterally without prior notice.

3.3. If the price of a product ordered by the Buyer changes, the manager of the online store immediately informs the Buyer about this (by phone, via Skype or via email) in order to receive confirmation or cancel the order. If it is impossible to contact the Buyer, this order is considered cancelled.

3.4. The invoice issued to the Buyer is valid for 3 business days.

3.5. All products available in the assortment of our online store are provided with a warranty - 2 weeks (14 days) from the date of receipt of the order, or an extended warranty for a longer period, if this is specifically agreed for this product.

3.6. The online store assumes responsibility for all defects in the goods, with the exception of those that arose as a result of the buyer’s violation of the rules for using, storing or transporting the goods and due to the fault of third parties. If your product turns out to be defective and, despite careful handling, becomes unusable within the first two weeks of use, please notify us by email. We will exchange your item for an identical one, and if this model is not in stock, we will exchange it for an item of equal value, or refund your money.

4. Procedure for purchasing goods

3.1. The Buyer has the right to place an order for any product presented on the Site. Each product can be ordered in any quantity. An order can be placed by the Buyer in the following ways: made by phone, by email, or placed independently on the Site.

3.2. After placing an order through the Site, a letter confirming acceptance of the order is sent to the Buyer’s e-mail, indicating the names of the selected goods and the total amount of the order, which is an integral part of this Agreement.

3.3. If there is no product in stock, the manager of the online store is obliged to notify the Buyer about this (by phone or via email) and inform the possible delivery time of the product.

3.4. The buyer has the right to make a pre-order for a product that is temporarily out of stock, replace it with another product, or cancel the order.

3.5. The Buyer has the right to refuse the ordered goods at any time before they are sent to the Buyer, or upon receipt from the courier until payment is made.

4. Delivery of goods, timing

4.1. Delivery of goods ordered in the online store, in the agreed quantity and assortment, is carried out by courier service or Transport Company.

4.2. The costs of delivery of goods are paid by the buyer in accordance with the choice of delivery method.

4.3. The maximum delivery time for goods to the Buyer's address, from the moment payment for it is received in the bank account, is for regions from 3 to 45 days (delivery times are specified upon purchase). For Moscow and the Moscow region, delivery time is from 1 day, but not more than 7 days.

5. Payment for goods

5.1. Prepayment of the goods in the amount of 100% of its cost is made to the bank account through the payment services offered to the Buyer, or upon receipt of the goods in cash to the courier at the time of delivery of the goods.

5.2. The goods can only be paid for in rubles.

5.3. The type of payment depends on the delivery option you choose. When placing an order, the online store manager will tell you how you can pay for your purchase. Please note: our couriers accept cash in rubles and do not accept payment cards. Payment by card is only possible on the website when placing an order.

Appendix No. 1
to the Order Delivery Agreement.

1. Delivery throughout Moscow and the Moscow region for orders worth more than 3,000 rubles:

Delivery geography	Delivery cost, rub.	Delivery terms	Payment Methods
Within the Moscow Ring Road	For free*	15 days**	Cash to courier; bank transfer.
Outside the Moscow Ring Road	Plus 30 rubles per 1 km
Pickup	For free	15 days**	Cash in store; credit card Visa or MasterCard on the website; through the Yandex.Money payment system; bank transfer.

2. Delivery within Moscow and the Moscow region for orders worth less than 3,000 rubles:

* Shipping costs depend on the weight and size of the item. The cost of delivery of oversized goods (weighing more than 5 kg and one of the dimensions is more than 1.5 meters is negotiated individually).

** Exact date delivery will be announced by the online store manager. If the delivery date changes, we will notify you of the exact date.

Appendix No. 2
to the Agreement on payment options for the order.

The following forms of order payment are possible in our online store.

1. Payment in cash to the courier.

You pay after receiving the goods and checking them. We will be grateful if you can prepare the payment amount without change.

2. Plastic card Online.

Pay for your order using payment cards Visa cards and MasterCard immediately after its registration. It's safe and convenient. Our partner is the NPO "Yandex.Money". A secure Internet connection will ensure the safety of your card data. In case of refusal of the goods, we will return your funds to your account within 10 days.

3. Transfer to a bank account.

After placing your order, we will send you a completed receipt by email, which can be paid at any bank in the country.
As a rule, we see that the order has been paid within 1 - 3 business days after payment and immediately send you the order.

4. Electronic wallet "Yandex.Money".

Fast and secure transfer of funds for those who own electronic cash.

Agreement for the processing of personal data

The buyer, by leaving a request on the website www.site, accepts this Consent to the processing, storage and use of his personal data (hereinafter referred to as the Consent).

Acting freely, of his own will and in his own interest, as well as confirming his legal capacity, the Buyer gives his consent to the Branch of Furniture Components LLC in Moscow (TIN 6829087131), which is located at 125438, Moscow, st. Avtomotornaya, 7, floor 3, room 301, to process your personal data under the following conditions:

1. This Consent is given to the processing of personal data, both without the use of automation tools and with their use.

2. Consent is given to the processing of my following personal data: Last name, First name, Patronymic; Date of Birth; numbers contact numbers; email addresses; mailing address; place of work and position held; location information; OS type and version; browser type and version; device type and screen resolution; the source where the buyer came to the site, from what site or through what advertisement; OS and browser language; what pages the user opens and what buttons the user clicks; IP address, cookies.

3. Personal data is not publicly available.

4. Purpose of processing personal data: processing incoming requests from individuals for the purpose of providing advice and customer support; buyer registration on the website; fulfillment by the seller of obligations to the buyer; delivery of goods to the buyer and after-sales service; action analytics individual on the website and the operation of the website; carrying out advertising and newsletters; conducting audits and other internal studies in order to improve the quality of services provided.

5. The basis for the processing of personal data is: Art. 24 of the Constitution of the Russian Federation; Article 6 of Federal Law No. 152-FZ “On Personal Data”; this consent to the processing of personal data

6. During the processing of personal data, the following actions will be performed: collection; recording; systematization; accumulation; storage; clarification (update, change); extraction; usage; transmission (distribution, provision, access); blocking; deletion; destruction.

7. Personal data is processed until the individual unsubscribes from advertising and newsletters. Also, the processing of personal data may be terminated at the request of the subject of personal data. Storage of personal data recorded on paper media is carried out in accordance with Federal Law No. 125-FZ “On Archival Affairs in the Russian Federation” and other regulatory legal acts in the field of archival affairs and archival storage.

8. Consent can be revoked by the subject of personal data or his representative by sending a written application to the Branch of Furniture Components LLC in Moscow at the address indicated at the beginning of this Consent.

9. If the subject of personal data or his representative withdraws consent to the processing of personal data, the Moscow branch of Furniture Components LLC has the right to continue processing personal data without the consent of the subject of personal data if there are grounds specified in paragraphs 2 – 11 of part 1 of the article 6, Part 2 of Article 10 and Part 2 of Article 11 of Federal Law No. 152-FZ “On Personal Data” dated July 27, 2006.

10. This consent is valid all the time until the termination of the processing of personal data specified in clauses 7 and 8 of this Consent.

11. The seller reserves the right to make changes to unilaterally to these rules, provided that the changes do not contradict the current legislation of the Russian Federation. Changes to the terms of these rules come into force after their publication on the website www.site.