Every day we spend about 8 hours in a dream. Not only the morning mood and working capacity, but also health depends on how well the sleeping place is equipped. - that's only half the story. It is also necessary to choose a suitable mattress, because in case of an error, you will experience muscle and back pain, insomnia and even allergies. Making the right purchase is not as easy as it might seem. Outwardly, all mattresses are very similar, but at the same time they can differ significantly in the type of filler, the presence of springs and other parameters. Let's try to figure out how to choose a mattress for a bed in order to ensure a healthy sleep and comfortable rest.

No. 1. Mattress size

The simplest thing is choosing the right size. It is enough to measure the inner perimeter of the bed by removing the old mattress:

The least problems arise when the bed and mattress of the same brand, and even bought at the same time.

No. 2. Mattress construction: spring or springless

A key characteristic of any mattress is the presence or absence of a spring block in it. Looking ahead, we note that both options can be used for permanent rest.

Mattresses on springs

Mattresses with a spring block are divided into two types:

Mattresses with dependent spring block have been produced for over 60 years. Their peculiarity lies in the fact that all the springs are interconnected. Springs are made from cold drawn steel wire and can be cone or cylinder shaped. To their main benefits include low price and high strength. disadvantages the design has more. Since all the springs are connected, the pressure on some of them causes an instant "response" in others. This effect is especially noticeable in double mattresses, when the difference in the weight of the sleeping people is more or less significant: one spouse will certainly roll down to the middle of the bed. A similar effect will be inevitable even for a single mattress. It turns out that the human spine will adapt to the curves of the mattress, and not vice versa.

In addition, "bonnel" type mattresses are pressed through in the middle part over time, and as a result, instead of a comfortable bed, it forms. If you want to choose an orthopedic mattress for a healthy sleep, then a model with a dependent spring block is clearly not suitable. This is an option for rare use, for example, for a country house.

Independent spring block means that the individual springs are not only not connected to each other, but are also in their own fabric cover. Isolated springs perfectly adapt to a sleeping person, and the presence of a cover allows us to talk about the absence of squeaks. When one of the sleepers gets up or rolls over, the mattress springs under the other sleeper will remain motionless. No one will slide anywhere, nothing will sag over time.

This design allows you to provide excellent support to the spine and take its shape. The durability of such mattresses is on top, as is the price. Orthopedic mattresses are equipped mainly with an independent spring unit.

depending on the number of springs There are the following types of mattresses:

The more springs and the smaller their diameter, the better the mattress will adapt to the body of the sleeper. If you need to choose a good orthopedic mattress, then it is better to take S-1000 or S-2000.

In addition to the traditional design of an independent spring block, there are Dual Spring mattresses. One spring is in the other, which provides optimal support for people of different weights - a good option for a couple in which the weight of partners is very different. Designed for overweight people reinforced block mattresses: the springs in them are made of thicker wire and are staggered. There are mattresses that are used in different areas springs with different degrees of rigidity. Due to this, maximum ergonomics are achieved, because the pressure exerted by the head and pelvis is different.

Springless mattresses

Such products consist of one or more layers of natural or artificial materials, the rigidity of which can vary greatly. The simplest and cheapest option is a foam springless mattress. At first it will be comfortable, but very soon it will begin to slip. Mattresses show themselves better, where foam mixed with additives other materials, such as coir or latex. Latex foam mattresses are highly resilient and long lasting, but the most durable will be mattresses made entirely of natural latex or coconut fiber. These are elastic, elastic and hypoallergenic products. Depending on the combinations of certain materials the required level of rigidity is reached.

A high-quality springless mattress will cost a lot, but in terms of performance, it almost does not differ from a product with an independent spring block. Since there are no springs in it, no one will slide anywhere, and the problem of squeaking will be impossible in principle. This is ideal for . We also add ease of transportation, since the springless product can be twisted. True, under such a mattress, an orthopedic lattice of flexible slats is needed - most modern beds have such a base.

No. 3. Mattress fillers

No. 8. Mattress manufacturers

The name of the manufacturer is a guarantee of quality. Risking your reputation in an era when information on the Internet is distributed instantly, few people will. You can trust products of such brands:

When choosing a mattress, do not forget to test it personally, checking the quality of workmanship and rigidity. If the product is uncomfortable, then it will be clear almost immediately. And further. A mattress is one of the few things you shouldn't skimp on, as too much depends on the quality of your sleep.

The desire to feel perfectly rested and well-rested requires careful attention to the selection of an orthopedic mattress. A huge range of products, which are filled with regular and online stores, leads customers more to confusion than to making the only right decision.

The issue of acquiring the most suitable product in terms of characteristics worries many consumers. The prepared review will help to understand the differences between models with different fillers and different degrees of rigidity.

STEP 1 Choosing the firmness of the mattress

This is one of the fundamental characteristics of an orthopedic mattress. Good rest and well-being of a person largely depend on its rigidity. For a comfortable stay, medium-hard mattresses are considered the best option, but the choice remains individual.

• Increased rigidity

  Hard mattresses are recommended for diseases of the spine, osteochondrosis. The filler can be such materials as compacted polyurethane foam, strutto fiber, coconut fibers, composites. As a result, the surface is not soft, does not provide comfortable sleep, but in case of problems with the spine, it will ideally support sick or damaged vertebrae. Sleeping on such mattresses is also indicated for people with excellent health, but those who are over 50 years old should be careful when choosing a mattress that is too hard. In any case, hard mattresses are rather specific products that are chosen either because of the love of hard sleeping surfaces, or because of medical prescriptions.

• Medium hardness

  The most recommended stiffness for a healthy person of average build and height. In inexpensive mattresses, composite materials such as struttofiber, artificial latex, polyurethane foam with characteristic orthopedic qualities are used to provide medium-hardness stuffing; for more expensive mattresses, a combination of natural latex and coconut coir, as well as memorix. Such mattresses with medium hardness are in great demand.

• Low hardness

  To provide mattresses with low rigidity, manufacturers use polyurethane foam and natural latex layers. Natural latex filler is classified as orthopedic stuffing, and polyurethane foam is not suitable for sleeping people who are overweight. Often soft and moderately soft mattresses are chosen for the elderly, as well as for children aged 8-15 years.

Recommendation: To clarify the firmness of the mattress, you should use the accompanying passport, which indicates the weight that the product can withstand. It will be convenient for a thin person to sleep on a soft model, and for those who have extra pounds, it is advisable to opt for a harder option.

STEP 2 We take into account the weight of the sleepers

In addition to the selection criteria mentioned above, the weight of the future owner is of no small importance. It is very important to take this factor into account, since, firstly, the service life of the product depends on it, and secondly, the feeling of the rigidity of the mattress.

Do not exceed the maximum weight per bed specified in the mattress specifications. It is better to have a margin for this indicator in the region of 5-20 kg. In addition, keep in mind that the firmness of mattresses is indicated for people of average build (weighing 70-90 kg). For example, for an overweight person of more than 110 kg, a mattress with a declared average firmness will seem rather soft, and for a person with a weight of 40-50 kg, on the contrary, it may be perceived as moderately hard.

• People who are overweight will feel comfortable on fairly high mattresses.
• For people with normal weight, experts advise opting for medium-thick mattresses.
• A thin person will not be able to put enough pressure on the thickened base of the mattress, so there is no point in buying a mattress that is too thick.

Models with a small thickness, which is limited to a couple of centimeters, do not belong to the bases suitable for sleeping. Such products are suitable for creating comfort on the sofa, bed and leveling their surfaces and are called mattress toppers.

STEP 3 Choose the size and height of the mattress

The comfort of rest largely depends on the height of the mattress. In addition, this factor is also important in aesthetic terms. The thinnest are mattresses up to 14 cm thick, such mattresses are usually designed for children or infrequent seasonal use. Experts say that thin models can adversely affect health, harm the spine with a significant weight of the sleeper. For adults, the following height guidelines are suitable as the main mattress for permanent use:

• When choosing a mattress for adults, you should select products whose thickness is 14-30 cm.
• If you buy a springless monolithic mattress, then its thickness can be at least 14-16cm.
• High-quality mattresses with independent spring blocks are made with a thickness of at least 18-19 cm. Anything less is ultra-cheap options with thin filling.
• Manufacturers also offer models with multilayer filling, which provides more convenience and comfort. Elite mattresses can have a thickness of 24 to 40 cm.
• The standard value for the height of an orthopedic mattress for an adult is the range of 19-23 cm.

Important! For children over 4 years old, the use of very thin mattresses (3-6 cm) is categorically unacceptable.

When it comes to the dimensions of a mattress with orthopedic properties, we are talking about its suitability for the base and/or the bed on which it will be placed:

• If the width of the mattress is greater than the width of the bed, then this will either lead to drooping edges and, as a result, an uncomfortable sleep, or the mattress simply will not fit into the dimensions of the bed;
• If the mattress is smaller in width, then this will cause inconvenience during rest, the sloppiness of the appearance of the bed;
• With an inappropriate length, the same uncomfortable picture will result, leading to discomfort or impossibility of operation.
• The most common sizes of mattresses for a single bed: 80x190, 80x200, 90x200 cm. For double sizes, 120x200, 140x200, 160x200 and 180x200 cm are considered standard. We recommend taking standard sizes - this will simplify the selection of furniture and accessories.
• If you measured the size of the mattress, and it turned out to be outside the standard values, you can always order a mattress in a non-standard size.

Advice! The best option is the simultaneous selection of a bed and a mattress with exact observance of mutual parameters.

STEP 4 Type selection: springless or spring mattresses?

When answering the question of which model to choose - springless or spring - you should understand their differences.

Spring mattresses Bonnel

Mattresses with dependent spring blocks are called classic, their use has more than one hundred years. They are called Bonnel. Such mattresses do not have orthopedic properties.

Important! The use of old and broken spring mattresses leads to damage to the joints of the vertebrae, curvature of the spine.

The low cost of spring models attracts buyers. However, before purchasing, it is advisable to weigh the pros and cons, so that at the minimum payment you do not get health problems for either children or adults.

Mattresses equipped with independent spring units

Such mattresses attract the attention of consumers with a simple, but very comfortable design. Each of the springs is placed in a separate case, which allows you to move without contact with other blocks. When you click on several blocks, adjacent springs will remain in the same position. On the top and bottom of the blocks, fillers are horizontally placed, which, together with the springs, create a mattress with excellent orthopedic and anatomical qualities.

Each spring works pointwise, independently. This means that the mattress will ideally bend under every curve of the human body and provide the necessary support for the spine. The standard spring density is 250 pieces per square meter, but there are also models with advanced design blocks - Multipocket (about 500 springs per square meter) and Micropocket (more than 900 springs per square meter). Such models can be advised to people with a lot of weight, as well as to those who want to get the best orthopedic back support from all that modern spring mattresses offer.

The use of mattresses with an independent spring unit is indicated for people over the age of 12, taking into account the degree of surface hardness. The advantages of models with such springs include:

• pronounced orthopedic properties with excellent back support;
• long service life;
• lack of squeaking springs;
• the possibility of use for people with a large body weight;
• high degree of reliability, which guarantees the preservation of the properties of the base even after active games for children;
• comfort of sleep and rest.

The price of this type of mattress varies very widely - from low-cost models with TFK box springs and artificial fillers to expensive mattresses with heaped high-density box springs with high-end materials.

Springless mattresses with polyurethane foam

This is the most common type of inexpensive springless mattresses today. Often they are sold in compact rolled packaging. These mattresses are often bought for children, teenagers and adults as an economical option. They are great for the role of mattresses for giving or a rented apartment. However, among them there are good options that are perfect for the role of mattresses for permanent use, the only thing you need to pay attention to is the density of PPU, such mattresses should have a stiffness index of "medium" or "moderately hard".

Advantages and disadvantages

• Pros:

  Availability and low prices;
  - several levels of hardness - from soft to medium;
  - pretty good orthopedic qualities in models with dense foam;
  - ease of transportation to the destination.

• Minuses:

  Low service life;
  - not the best anatomical qualities.

Springless mattresses with orthopedic properties

When choosing a springless version, you should focus on the filler responsible for the rigidity of the product. Mattresses that do not have springs are characterized by sufficient strength and soundlessness, which have earned considerable popularity among users.

In the manufacture of fillers, latex, coconut fiber, struttofiber, horsehair, polyurethane foam and other materials are used that provide surfaces with orthopedic properties, and the owners - a comfortable and healthy sleep.

Thanks to well-chosen filling, the products have amazing endurance, withstand considerable loads, jumps and games of children. Orthopedic springless mattresses can be structurally divided:

Advantages and disadvantages

• Pros:

  Long service life;
  - several levels of rigidity;
  - high orthopedic properties.

• Minuses:

  High price due to the use of expensive fillers, including coconut fibers, natural latex;
  - the big weight of such mattresses.

STEP 5 Filling Material Selection

A well-thought-out approach to choosing a filler for an orthopedic mattress will allow you to purchase a model that is suitable for the personal needs of the buyer, because this directly affects the rigidity, environmental friendliness and reliability.

Remember! Such fillers as fluff, inexpensive foam rubber stuffings, cotton wool do not have orthopedic characteristics. Among the unpopular properties of cotton wool is knocking down into uneven lumps, which interferes with comfort during sleep.

Latex

The basis for the manufacture of latex layers is hevea juice, processed in a special way to obtain a foamy mass. The prepared material serves as an excellent filler for orthopedic mattresses, taking the shape of the body and perfectly supporting the spine. Latex can be either soft or hard enough. At the same time, artificial material has a higher degree of rigidity compared to natural. The popularity of latex mattresses is evidenced by their demand among both children's and adult consumer audiences.

In the list of advantages of latex filler:

• providing comfortable conditions for recreation;
• anatomical repetition of body contours;
• convenience of sleep for people who are diagnosed with problems with the spine;
• perfectly withstands heavy loads and the mass of a person, rapid restoration of the structure due to porosity;
• combination with various materials allows, if necessary, to increase rigidity;
• the use of the material in soft models of mattresses allows you to maintain both the comfort of sleep and the orthopedic properties of the base;
• lack of allergic effects;
• quick disposal of excess moisture;
• wear resistance under heavy loads.

Among the shortcomings are the high cost of products, as well as the fragility of the artificial material, which dries out after some time, which leads to delamination.

polyurethane foam

The high popularity of polyurethane foam (PPU, orthopenes, artificial latex) is due to the fact that the basis is foam rubber, familiar to many users, with various orthopedic additives. The use of polyurethane foam makes it possible to produce orthopedic mattresses with good characteristics at a fairly low price.

Among the positive aspects of using PPU:

• affordable cost;
• sufficiently long service life;
• immunity to increased loads, so jumping and playing children are not critical;
• providing sufficient orthopedic properties, which is acceptable for those who care about their health.

Problematic points include the difficulty of removing absorbed moisture, as well as the problem of cleansing from pollution. In addition, the service life of mattresses using polyurethane foam is short - from 4 to 9 years.

coconut coir

An elastic board made from pressed coconut fibers is one of the rather rigid materials that are often used to fill orthopedic mattresses. Coir is usually combined with latex and polyurethane layers, which allows you to create surfaces of excellent quality and comfort for sleeping and relaxing. Or it can be used without additional softening fillers, thus obtaining mattresses with high rigidity.

The benefits of choosing coconut coir mattresses include:

• non-allergenic material;
• creation of an obstacle to the reproduction of bacteria;
• rapid evaporation of moisture;
• not subject to decay;
• environmental friendliness;
• excellent ventilation;
• medical and orthopedic properties;
• no harmful components;
• proper back support during sleep;
• The ability to use not only for adults, but also for children of any age.

The disadvantages include the high cost, the reason for which is the complexity of processing and preparing the material.

You should know it! Mattresses with coconut filler are fragile, which should be taken into account during operation, without exposing the product to shocks and twisting.

Hollofiber and Struttofiber

An interesting name refers to a material that has unique properties due to its unique structure in the form of vertically arranged fibers. In the production of a mattress with struttofiber fibers, goat hair, horsehair, and linen threads can also be added. An excellent combination is obtained by combining struttofiber or holofiber with polyurethane foam or with independent spring blocks. Hollofiber is a very similar material, but in it the fibers are not oriented vertically, but randomly, which makes this material a little softer compared to strutofiber.

The advantages of a strutofiber / holofiber are as follows:

• a pronounced manifestation of the properties of the orthopedic plan;
• elasticity;
• excellent breathability;
• quick disposal of moisture that has fallen on the surface;
• hypoallergenicity;
• immediate restoration of the original shape after the transferred deformation;
• a wide range of stiffness from medium to high;
• wear resistance;

Memory foam mattresses

MemoryForm is a material with a foam structure that allows the surface to adapt to the shape of the body. Memory Form bends under a person, acquiring his shape, and after the load is stopped, it is restored within a few minutes. These memory foam mattresses provide excellent sleep conditions, however, at low temperatures, the unique material becomes more rigid.

Made a choice? Book a mattress!

After careful consideration of the characteristics of mattresses with various fillings, it is easy to conclude which product is the most suitable. Choose models with care for your health and those close to you!

Use our mattress selection form - with it you can do it easily and quickly!

Want to wake up refreshed and refreshed every morning? So, you need to purchase the right size and comfortable mattress for the bed. After all, we spend a third part of our lives in a dream, and proper rest is the key to excellent health for the whole day.

Let's figure out how to provide your body with healthy sleep? Which mattress is useful and ideal for sleeping?

Which mattress is better to choose?

“Of course, orthopedic!” - you will say and you will be absolutely right.

A mattress with an orthopedic effect has an amazing property - it takes on the contours of the body, providing the spine with the correct position during sleep. Not too hard, but not too soft mattress will allow the spine to take its natural position, without additional stress.

Such a mattress is able to relieve fatigue and excessive muscle tone. Unlike a regular mattress, an orthopedic mattress has a beneficial effect on blood circulation and serves as an excellent tool for preventing diseases associated with curvature of the spine.

Spring or springless?

There are two classes of mattresses on the modern market - spring and springless. Which ones are better? Which mattress is more comfortable to sleep on? Each buyer must find the answer to this question for himself, because the choice is influenced by individual human characteristics:

• physical data (age, height, weight);
• medical indications;
• personal preferences.

So, the most comfortable for people of full complexion will be a hard or medium hard mattress. Those who can boast of their harmony are recommended to pay attention to soft and medium soft models. The main criterion for choosing a mattress for a person suffering from allergies will be the material from which the product is made. For the normal development of the spine and maintaining the correct posture of the child, orthopedists recommend choosing a hard mattress for the bed. A mattress with an independent spring block or a springless mattress is suitable for this role.

According to experts: the older people are, the softer the mattress.

Thickness

The height depends on the filler and the presence of springs in it. The thickness of springless models is 15-18 cm, and spring models are 18-24 cm. Some manufacturers produce thin mattresses, their height is 3-4 cm. They are used as a cover and to improve the properties of the main mattress.

Case

The cover must be durable, elastic and breathable. For sewing, natural (cotton, linen), combined (cotton + synthetics), artificial (polypropylene, polyester) fabrics are used.

The best upholstery material for a mattress is jacquard.

Very often, the fabric for covers is impregnated with special anti-allergic agents that protect against dust and increase the strength of the product.

The cover can be removable or non-removable. Many people think that a removable one is a more practical solution - you can remove it and wash it. But it should be remembered that after washing it can shrink and put it back on will be very problematic. Due to the loose fit of the cover, the mattress quickly becomes unusable.

The non-removable cover is tightly fixed on the mattress, evenly stretched over its surface. This gives the structure strength and extends the service life.

To understand how to choose the right mattress for a bed, let's find out the advantages and disadvantages of modern models.

Box spring mattress

Such mattresses are made in two solutions - with dependent and independent spring block.

Dependent spring block (Bonnel system)

Bed mattresses based on Bonnel blocks are an economy class solution. Five-turn springs connected to each other are attached to the metal frame, which provides orthopedic rigidity and the necessary elasticity of the mattress.

In Bonnels, a “wave effect” is often observed: when a second person lies down on the bed, the first one feels vibrations. This is due to the continuous connection of the springs, which, when interacting, form a kind of hammock.

The low price allows you to purchase such a mattress for a double bed as a guest or country option. When buying a spring mattress, you should pay attention to the number of springs per square meter: the more there are, the better the orthopedic effect.

Device: 1 - upholstery; 2 - spring block of dependent springs; 3 - felt layer; 4 - foam rubber; 5 - polyurethane foam perimeter.

A more modern approach to orthopedic mattresses is implemented in the use of independent spring blocks. The whole design of a spring mattress consists of many springs, each of which is in a separate fabric case. The springs are not connected in any way, the pressure on one of them does not affect the others.

Levels of orthopedic effect:

• S-500 (TFK, EVS500) - from 220 to 300 springs per square meter, with a diameter of 5 - 6 centimeters;
• S-1000 (anatomical) - 500 per sq.m., 4 centimeters in diameter;
• S-2000 (Multipocket) - 1000 per square meter, 2 centimeters in diameter.

Manufacturers of spring mattresses try to satisfy any request. Independent springs are designed for different categories of customers:

• Dual Spring (spring in a spring) - for partners with very different weights. The inner spring is stiffer, the outer spring is softer. When a person with a large weight lies on the mattress, the outer springs are pressed through, releasing the rigid inner one.
• Reinforced blocks - independent springs made of stiffer wire, staggered arrangement. The blocks are designed for people with a large body weight.
• Spring blocks with dedicated stiffness zones. The weight in the human body is not evenly distributed: the head is lighter than the pelvic region. The manufacturer provides different stiffness of the springs depending on their location.

These spring mattresses for your bed will be the perfect solution for any couple. After all, the movements of one spouse in a dream will not interfere with the other in any way. Independent springs will prevent "rolling" to each other.

Device: 1 - natural coconut coir; 2 - a layer of latex; 3 - spring in a case; 4 - case; 5 - polyurethane foam perimeter; 6 - independent block of springs; 7 - natural coconut coir.

The choice of mattress depends on your preferences and capabilities. The only drawback of such a mattress is the higher cost of the product.

Springless Models

The basis of the mattress is a homogeneous elastic material. The absence of metal structures eliminates the possibility of magnetic and electrostatic effects on the body. The absence of springs allows the manufacturer to achieve any degree of rigidity: from the softest (latex) to the hardest mattresses (from coconut coir.). And the material from which it is made can be both natural and synthetic.

The springless mattress does not creak after prolonged use and does not disturb rest or sleep.

These mattresses include air (inflatable) and water (filled with water), which were originally developed for rehabilitation institutions. Despite the high medicinal properties, they are not widely used.

Which mattress to choose for the bed is up to you. And we will analyze the fillers.

Mattress fillers

Filler - defines properties. If a person clearly knows what effect he needs, then when choosing, he can safely focus on the material of the product.

• Are very popular natural latex mattresses(natural material from the milky sap of the hevea tree). The porous structure, somewhat similar to a honeycomb, provides good air circulation, removes excess heat and moisture. Natural latex has an excellent healing effect: it bends around the shape of the body and supports it.

• For those who like to sleep “like on boards”, the natural filler from coconut fibers is most suitable for hard mattresses. The product is hypoallergenic, does not absorb moisture and odors, has natural ventilation.

The most popular is a combined solution: a mattress with alternating layers of coconut coir and natural latex.

• Mattresses filled with seaweed have medium hardness. The material is hypoallergenic, natural. Saturation with minerals and iodine improves immunity and calms the nerves.

• Of synthetic materials, polyurethane foam is in greatest demand. Studies have confirmed the safety of such a mattress. Elastic, hygroscopic, does not irritate the skin and does not cause allergies. Has a "memory effect": repeats the natural curves of the body.

The nuances of choosing a mattress for a double bed

A mattress for a double bed must withstand higher loads and suit two people. But what about when one likes it harder, and the other softer. In this case, there may be two options:

• Buy two single mattresses - to each his own. A thin wide mattress pad will give the appearance of one whole and eliminate a small gap.
• Buy one double-sided mattress with different firmness. By periodically turning the product, you can meet the needs of each in turn. Or over time, decide which side of the mattress is more comfortable for both to sleep on.

Price

Double mattresses for beds with a Bonnel block will cost 5,000 - 10,000 rubles, with a block of independent springs - from 10,000 and more. Springless models from 15,000 to 30,000 rubles. (depending on filler).

An imported mattress will cost twice as much as a domestic counterpart.

• It is necessary to determine the rigidity: the filler of the upper and lower surfaces of the mattress.
• For a child or teen bed, it is better to buy a springless mattress.
• Older people are better off choosing softer options.
• If you have problems with your lower back, pay attention to soft models, hard ones are contraindicated for you.
• To support the upper spine, it is worth buying a hard mattress for beds.
• Test several solutions: on the mattress you need to lie down in the position that you usually take during sleep.
• Make your choice in favor of well-known manufacturers.
• Consider the size of your bed.

The mattress, first of all, should be comfortable for sleeping and preferably natural.

The right choice is the key to healthy sleep and good mood!

Rating by manufacturer and size

By manufacturers:

To size:

Size, cm	%
200x200	22
160 x 200	15
140 x 200	8
180 x 200	5

The quality of sleep and the state of a person in the morning directly depend on the arrangement of a sleeping place, because it often happens that even an 8-hour sleep does not give the desired rest and energy for the whole day.

When it comes to a bed for two people, the available space for everyone is important, i.e. the size of the entire bed. To get the necessary sound sleep and full recovery by morning, you need to know how to choose a mattress for a double bed.

Features of choosing a double mattress

It is more difficult to choose a high-quality double product than a single or one and a half, because the load on the structure is higher. You need the right degree of elasticity, rigidity and wear resistance.

The problem lies primarily in the different weight categories of the spouses. Sometimes the difference is two times. Soft models are perfect for a comfortable sleep of a fragile woman, and a large, heavy man needs a harder surface. You can solve the dilemma by buying two different mattresses. To ensure the unity of the resulting bed, you will have to purchase a double dense mattress cover.

Another solution would be to buy a double-sided product. Periodically turning it over, the spouses finally determine on which side, soft or hard, it is comfortable for both to sleep.

A quality product can last for many years, but it is designed for an average weight. Therefore, in order to decide which mattress is better to choose, you must first take into account the mass of a heavier partner.

Mattress size

The dimensions of the mattress directly affect the healthy sleep of a married couple and the life of the product itself.

First of all, it is recommended to measure the length and width of the bed. This should be done on the inside of the restrictive side of the furniture frame. Under no circumstances should measurements be taken of a used product to be replaced. Over time, it deformed, and the dimensions changed.

With standards, it is not difficult to equip a sleeping place, but which mattress to choose for a double bed, if its dimensions do not fit any model offered for sale, is a problem that is difficult to solve.

Often choose the most approximate dimensions. At the same time, manufacturers allow a discrepancy of no more than 1 cm. Excess leads to constant movement of the bed on the surface of the base, as a result of which the cover will quickly become unusable. The best option would be to manufacture the product to order, taking into account the individual dimensions of the mattress for the bed.

Another characteristic is the height of the structure. The location of the top line of the bed affects the comfort while sitting. Before choosing the height of the mattress, it is recommended to measure the location of the base and calculate the allowable thickness of the model that will lie on it.

Mattress construction: spring or springless

Before you choose the right mattress for the bed, you need to decide on its design. All products can be divided into 2 types - with or without a spring block, but consisting of several layers of natural and artificial materials.

Springless

A springless mattress has a simpler device of several layers. Manufacturers offer expensive and budget models that differ in filler.

The product made of natural materials, such as latex and coconut flakes (coir), has good air permeability, provides high-quality support to the spine during the entire period of operation. Depending on the thickness and number of layers, models can have different degrees of rigidity, because latex is resilient and elastic, and coir is hard.

In cheap models, instead of latex, foam rubber or holofiber is used, which have a shorter service life.

On springs

Spring blocks can be dependent and independent. The most budget option is a model based on mutually dependent springs. Impact on a separate area of ​​​​the surface will set in motion the entire product. This property makes the sleep of people with different sleep schedules not entirely comfortable, since there is a possibility of waking the sleeper.

In addition to the metal component, such products are equipped with layers of felt and foam rubber. The whole structure is placed in a dense upholstery case.

If the question is which mattress to choose for a double bed with the expectation of the longest possible use, such a model is not entirely acceptable. Over time, the connecting elements and the springs themselves stretch and deform, especially in the center and in the place where the heavier person constantly sleeps. This leads to subsidence of the surface and one partner begins to roll into the resulting hole.

In an independent spring block, each spring is placed in spunbonds, which, due to the specifics of the connection, allow the elements to move independently when the mattress is loaded, without dragging the neighboring ones. The higher price of the product is due to the long service life.

Fabric-metal mattress fillers are supplemented with layers of latex, coconut and foam rubber on each side, all components are placed in a cover.

Mattress upholstery

Manufacturers of products for sleep try to attract customers to their product by placing them in pleasant to the touch and attractive covers, decorating them with various patterns. However, you need to remember that a beautiful wrap will be hidden under the bed linen, and a good mattress should be equipped with not only beautiful, but also high-quality upholstery that can withstand constant stress for many years.

For the manufacture of covers, strong natural fabrics made of cotton and linen are used, as well as artificial ones - polypropylene, polyester. To increase functionality, the material is treated with moisture-resistant, dust-proof and anti-allergic impregnations.

Single and double sided mattresses

Both spring and simple models can be equipped with one or two "working" sides, which can have different stiffness and heat dissipation.

One-sided mattresses can only be used with the specified side up, and the second consists of layers of wear-resistant material that is not intended for healthy sleep. The advantage of most of these models is the low price and the absence of the need to periodically turn them over, the minus is a short service life. It is better to choose a mattress with one working side for beds that are located in guest bedrooms, for example, that is, they are not intended for permanent use.

There are premium single-sided mattresses that can be quite thick (more than 40 cm) and have the highest quality characteristics.

In the manufacture of double-sided mattresses, both surfaces are made suitable for sleeping. Depending on the thickness of the upper layers of the filler, they can have different degrees of hardness, be cold in summer and warm in winter.

Even if there are two sides with the same properties, the product must be turned over from time to time. This will allow the resting layers to crack down, this practice will double the service life.

How to determine stiffness

Choosing the right firmness for your bed is important. The discrepancy between this parameter and the person's weight will create constant tension in the spine, causing pain in the shoulders and lower back. At the same time, a too soft mattress also does not contribute to a good sleep due to the tension of the muscles and ligaments that does not subside.

According to the observations of users and research by manufacturers, tips were compiled on how to choose the firmness of a mattress depending on the weight of the sleeper:

1. With a weight of up to 55 kg, a comfortable and healthy sleep is ensured on a soft product.
2. A person with an average weight of 55 to 90 kg should prefer a model with an average degree of rigidity.
3. A rigid product is suitable only for heavy people, more than 90 kg.

The most difficult thing is to choose a double mattress for a couple with radically different weights, with any of the options, someone will suffer more. In order for a mattress chosen for an elderly person to fully satisfy orthopedic requirements and ensure quality sleep, it is best to consult with doctors, you may even have to order a special product.

Which is better - regular or orthopedic

It is generally accepted that all mattresses offered by popular manufacturers are orthopedic, but this opinion is erroneous. In order for the mattress to relieve hypertonicity and muscle fatigue, increase blood circulation, provide prevention of osteochondrosis and prevent bedsores and edema in bedridden patients, it is created using a special technology, taking into account medical requirements.

Before choosing an orthopedic mattress for a bed, you need to familiarize yourself with the accompanying documentation and the nature of the impact on the human body.

A good orthopedic mattress for a bed is expensive. It must be certified by the Ministry of Health. Its acquisition must be justified not only by the simple desire of a person to maintain good health, but also by a number of medical prescriptions.

The quality of night rest directly depends on the choice of an anatomical mattress. That is why it is so important to choose the perfect bed from a trusted manufacturer. The Askona factory offers spring and springless models manufactured according to all quality standards and approved by Roszdravnadzor and CITO. And our qualified consultants will tell you how to choose a mattress, taking into account the physiological characteristics and personal preferences.

What to look for when choosing?

The design of the anatomical mattress

Mattresses are divided into two types - spring and springless. When choosing an option with a spring block, you should pay attention to the number of springs. The optimal density is 550 pieces per bed. The more springs per bed, the better the anatomical effect of the mattress.
The spring block, in turn, is divided into two types:

• Dependent spring block. Such a block has a continuous weave that connects all the springs to each other. The advantage of such structures is their relatively low price and strength. They withstand heavy loads, but practically do not have the necessary anatomical effect.
• Independent spring block. Independent springs are the most important component of an anatomical mattress. Each spring is in an individual case and works autonomously. Thus, only those that are directly loaded are bent under pressure. This allows you to maintain the spine in an anatomically correct position, eliminating the "hammock effect".

How to determine which mattress to buy - with a dependent or independent spring unit?

Mattresses with dependent and independent spring block have a significant difference. The latter have a great anatomical effect, and better adapt to the contours of the sleeping body. Despite the low price, mattresses with "" springs are recommended for short-term use, for example, in the country or as a guest option. Due to the continuous connection of the springs, the dependent block has a “wave effect”, since when pressure is applied to one, the adjacent ones are also activated. This leads to the fact that the spine adjusts to the curves of the mattress, and not vice versa. In addition, a person with a smaller weight may roll towards a larger partner.

In anatomical mattresses with an independent spring block, the “wave effect” is excluded. The weight of the sleeper is evenly distributed over the entire surface and the spine assumes the correct position. Thus, independent springs provide full uninterrupted rest and support posture.

Recently, springless mattresses have become increasingly popular. They are assembled from one or more layers of materials, both natural and artificial. The combination of different materials provides different degrees of firmness of the mattress.

Due to the variety of models, the question often arises, which mattress is better - spring or springless? It is difficult to answer this question unambiguously, because each of them has a number of advantages.

Spring mattresses withstand heavy loads and are highly wear-resistant. They are well ventilated and adapt as accurately as possible to the contours of the body of the sleeper. Springless models, in turn, do not accumulate static electricity and are not at risk of creaking due to the absence of metal structures in their composition. They can be used on various convertible bases and are also easy to transport as they can be sold rolled up.

Before choosing a spring mattress, you should pay attention to the maximum allowable load per bed. Partners with a significant difference in weight should choose mattresses with an independent spring unit and no load restrictions. This will help to avoid the appearance of a “wave effect” and will individually distribute the pressure of the mass of each sleeper over the surface of the mattress.

The anatomical mattress is selected according to the level of rigidity. Depending on it, the models are divided into:

• Soft. The softness of the mattress is given by various comfortable layers - latex, anatomical foam, holofiber, etc. The more materials there are above the spring block, the softer the mattress becomes. Such models are suitable for people with a fragile physique and the elderly. In some cases, they are also recommended for diseases of the lumbar region.
• Medium hard. Medium hardness is achieved through a combination of hard and soft fillers. Coconut and sisal are usually used as a rigid base, and comfort is provided by a layer of anatomical foam or bulky stitching. Such mattresses are universal and suitable for both children and adults.
• Rigid. In rigid models, materials such as coconut coir, sisal, thermally bonded linen predominate. Such mattresses can have a reinforced spring block, which allows them to withstand maximum loads. Recommended for people with a high body mass index, as well as problems with posture.
• Versatile. Such models can have different degrees of rigidity of the sides. This allows you to flip the mattress depending on the season and change the comfort.

Which mattress is better - soft, medium or hard?

The rigidity of the anatomical bed is selected individually, depending on the age, weight and preferences of the person. The heavier the sleeper, the firmer the mattress should be. Not only comfort during sleep depends on this, but also the service life of the product, because in rigid models, materials that are more resistant to loads are used, which exclude early deformation.

Reinforcement around the perimeter

An additional box of anatomical foam around the perimeter of the mattress avoids deformation throughout the entire service life. It also protects the spring block from damage and creates comfort when sitting on the edge of the mattress.

The size

When choosing a size, you should rely on two criteria - the spatial capabilities of the bedroom and the physiological characteristics of a person. The sleeper should not rest his feet on the foot of the bed. The length of the mattress should exceed the height of a person by at least 15 cm, and the width of the bed should be equal to twice the width of the shoulders of the sleeper. With proper selection, nothing will interfere with a good sleep.
Mattresses can be single, one-and-a-half, double. Each type has its own standard sizes:

single: length - 190-200 cm, width - from 80 to 90 cm;

one and a half: length - 190-200 cm, width - from 120 to 140 cm;

double: length - 190-200 cm, width - from 160 to 200 cm.

When choosing a bed for a child, there are some nuances, because children's mattresses have several types:

• For newborns . Such mattresses are made for cradles and provide support for the child in the first years of life. The length of the models is from 100 to 120 cm, and the width is 50-60 cm.
• For young children. When the baby grows out of the crib, the cradle mattress changes to a full one. For children of preschool and school age, it is better to choose models from specially designed children's collections. They have standard sizes, but are made from materials adapted to the children's body.
• For teenagers. Teenage models are characterized by a high degree of elasticity, which allows the development of a fragile spine.

Brands

In the assortment of our online store you can find mattresses of different brands, both domestic and foreign.

(Russia). Our own branded mattresses have been developed by leading sleep experts. The range of models includes both spring and springless products of different price categories. Askona brand models are certified by Roszdravnadzor and CITO.