Living plants in the house are a wonderful decoration, which can be complemented by a metal floor stand for flowers. Together, they can make the room more comfortable and improve the atmosphere of the home. As far as colors are concerned, some of them are of great benefit. They can help with various diseases, as well as purify the air. The latter is very important for children's rooms, so their interior is often complemented with pots with house plants.

Most often, flowers in apartments live on windowsills. However, this is not always a good option. Firstly, not all indoor flowers tolerate a large amount of sun, and secondly, some specimens really do not want to be hidden from prying eyes behind curtains.

And here such a simple but useful solution as purchasing a flower stand will come to the rescue. They can be made from a variety of materials, but the most sophisticated options are made from metal. Such stands are good decorative elements and can be placed on the floor or suspended from the ceiling.

Floor metal stands for flowers will not look like an ordinary item that just takes up space in the room. Nowadays, designers offer such a variety of options that even the most demanding buyer will choose a suitable option for himself.

In modern stores, you can buy metal stands for flowers inexpensively, and these are designs in the form of high or low stools, openwork shelves, forged ladders, pyramids. It all depends on the manufacturer, or rather, his imagination. And having certain skills and special tools, you can make a metal flower stand yourself.

Professionals recommend, when choosing metal shelving for indoor flowers, first of all, to determine the place for this element. Depending on how much free space in the room can be given for a flower stand, the size of this decorative element will also depend.

Metal openwork flower racks are perfect for many interiors, they will best fit into a Provence style room. In this case, the metal frame should be painted white, as it is considered optimal for French country. Metal flower stands, the photos of which can be seen below, can be made not only in the form of ordinary tables or ladders, but also in the form of carts and bicycles to create a rustic atmosphere.

There can be a lot of varieties of such decorative elements. It all depends on the designer's imagination and the manufacturer. Floor-standing options are very popular, which sometimes can take up space from floor to ceiling. On such racks it is very convenient to place a large number of plants at a minimum of square centimeters. Saving space is relevant for many city apartments, which is why tall floor racks are very popular.

Often, for interior decoration, house owners opt for low metal supplies on legs. They can be either one pot or several.

It is very important to adhere to the general style of the room, for example, if the room is decorated in the Provence style, a flower metal floor stand for flowers in the form of a barrel, bicycle or trolley is suitable here. In general, absolutely everything that will emphasize the rustic orientation of the interior will be relevant. But for classic design ideas, it is better to choose a stand for indoor plants in the form of openwork stools or shelving. The antique-made bronze flowerpots look very original.

As for the color scheme, it can be completely different. Here you need to focus on the overall design solution and color scheme. For classics, a black metal stand with gold accents is best. In French country, light colors are welcome, so it is better to paint the florist white. For a modern high-tech style, where metal is often used, you can completely leave the product in its original color.

Benefits of metal stands

Professional designers believe that floor metal stands for flowers are the element of decor that gives a certain completeness to the design of the room. Often, it is the florists who use it as the final touch to make the room more comfortable.

A huge advantage of metal racks is that they are very durable, so you can choose tall specimens and not be afraid that they will fall apart due to the large weight of the flower pots. For practical people who are not used to wasting money, metal stands for indoor plants are just perfect. Such decorative elements have high strength and durability. The metal structure will look like new even after many years of use. At the same time, its shape and dimensions will remain unchanged, as if the stand had just been brought from the store.

If desired, you can significantly save space in the room. High floor racks make it possible to place a large number of flower pots, allocating only a few tens of square centimeters for this . Moreover, each plant will be clearly visible and presented in the most favorable light.

Sometimes metal stands for flowers are chosen not only by apartment owners, but also by people living in private houses. Good options will perfectly complement the interior of the yard and at the same time will last a very long time, unlike their wooden or plastic counterparts, which can be extremely susceptible to the effects of the external environment and will quickly become unusable. Floor metal stands for flowers look very good on terraces.

Very often, amateur flower growers complain about the lack of space for placing numerous pots. When all the free planes in the apartment are occupied with flowers, there is simply no place for a new pet. The way out of this situation can be original stands for indoor flowers. In this article we will tell you how to make a do-it-yourself floor stand for a flower.

Floor stand for flower: materials

• Chipboard (color - to your taste)

• Self-tapping screws (1.5 - 2.0 cm)
• Metal corners (4 pieces)

• Euro screws (4 pieces)

Stands for indoor flowers: tools

• Jigsaw

• Screwdriver

Do-it-yourself floor stand for a flower

From a sheet of chipboard with a jigsaw, we cut out parts for the future stand: two legs, a cover, a bottom. First, it is better to make a template out of paper, and then use it to cut out details from chipboard. To make the floor stand for a flower not only comfortable, but also look original, I propose to make it in the shape of a trefoil, and not an ordinary square or circle. However, no one limits your own imagination. Please note that the top and bottom parts of the stand may very well have different shapes. When the LSDP blanks are ready, you need to "put on" a plastic flexible edge on their ends.

The flexible edge is easier to put on if you first hold it in hot water or over a building hairdryer.

Along the edges for a more reliable fixation, we "grip" the edge with small nails or glue.

In the parts that function as legs, we cut out symmetrical vertical slots in the middle.

We start the process of assembling a stand for indoor flowers with the legs. We insert one part into another into the cut-out slots.

As a result, a stable structure in the form of a cross should be obtained, on the lower part of which the bottom of the stand will be attached with the help of metal corners, and on the upper, respectively, the tabletop itself in the form of a trefoil. Gently screw the lower part into the pre-drilled holes with Euro screws. Of course, the location of the corners and holes must match as closely as possible so that the stand does not turn out to be skewed.

After that, we just need to screw the upper part of the stand. We connect it in the same way with the cross, also with the help of metal corners, using an electric drill for this.

All parts are connected, the floor stand for the flower is ready.

Now the new flower has found a cozy nest for itself.

Indoor flowers are an essential attribute of home comfort. In order for them to grow well, it is necessary to think over the location of the pots. Therefore, you should get plant stands in advance. You can make them with your own hands. Some designs are made from improvised means in a matter of hours.

What kind of flower stands can be?

Flower stands are divided into 2 types. They are floor-standing and wall-mounted. The latter must be especially durable. Under heavy load, the entire structure can simply collapse to the floor. Therefore, if you have several large pots, then it is better to stop at the 1st type of coasters.

A more rational approach when creating such structures can be considered the manufacture of light decorative options.

Jar stand

You will need:

1. Wooden plank
2. White and brown acrylic paint
3. Pipe mount
4. Self-tapping screws
5. Beautiful cans of the same diameter as the pipe holder
6. Spatula or iron brush

Preparation method:

• The board must first be decorated. To do this, degrease it. After a while, cover with a darker acrylic paint. It should be chosen instead of alkyd, as it is less toxic, odorless and dries relatively quickly. After a few hours, cover the dried board with white paint. Again, we leave the workpiece for several hours.
• We age the surface with the sharp edge of a putty knife or an iron brush. To do this, in a chaotic manner, we make short and long scratches all over the board. The final piece should be made in a shabby chic style.
• On the board, mark with a pencil the places where the cans will be installed. To do this, take pipe fittings. They look like expandable rings with a mounting hole. Attach them in the right places. Then, holding each one with one hand, secure them to the self-tapping screw.
• We decorate banks. They can also be overcoated with acrylic paint of any color. Choose a jar for the size of the future flower. After painting, soil is poured into it and a flower is planted.
• All that remains is to attach the board to the wall. To do this, mark the points for fastening on the wall. Then we drill them with a drill. Insert the dowel into the hole. After that, we plant the board-stand on a self-tapping screw. We insert the jars with the planted plants into metal fasteners. Their upper part can be decorated with twine if desired.
• It is best to use a similar stand for shade-loving plants. If it is located near the window, violets can be planted in the jars.

Wooden flower baskets: master class

Stands can be made of treated solid wood, plywood or MDF. In the latter cases, the base material must be moisture resistant, as it can deteriorate due to periodic spraying of the plants.

A fairly convenient option is a pedestal stand for several pots.

You will need:

1. Jigsaw
2. Drill
3. Ruler
4. Dowels and screws

Manufacturing instruction:

• First, let's sketch out a template for the stand. It consists of 9 parts. 2 circles will be the bottom-base and top, and several rectangular blanks will be the bearing support. The approximate diameter of the circle is 40 cm. The height of the rectangular parts is 50 cm. With such dimensions, the do-it-yourself flower stand will be quite stable.
• First, we transfer the required dimensions to mdf. After that, cut out 3 identical circles, 2 narrow rectangles and one wide one.
• Saw one of the circles with a jigsaw perpendicular to the center point. We should have 4 sectors.
• Take 2 large circles and a wide rectangle. We outline the marks for the mount and drill them. Then we carefully put the parts on the screws. They should look like this: 2 circles and a rectangle diagonally between them.
• Let's move on to embedding other rectangles. They need to be positioned at an angle of 90 degrees to the wider one. Parts are also attached to self-tapping screws.
• The sawn sectors will need to be located at any convenient level in the parts obtained after the intersection of the rectangles. They look best at different levels. Sectors are also planted on self-tapping screws.
• After sawing out the workpieces, you may notice that the edges remain unprocessed. They can be trimmed off on their own or parts of the future stand can be handed over to the furniture base, where a specialist will do it.

How to make flower stands on the windowsill?

Many housewives are faced with the fact that the window sill becomes the only bright place in the apartment for growing flowers. In this situation, he simply physically cannot accommodate all indoor plants. A hanging flower stand will help solve the problem. You can also make it for walls. In this case, they are equipped with additional lighting.

You will need:

1. Several boards of the same width and length
2. Strong ropes
3. Jigsaw
4. Acrylic paint
5. Anchor bolts
6. Flower pots

Manufacturing instruction:

• This flower stand is designed for a certain number of the same type of pots. The structure is essentially suspended. Therefore, you need to pay special attention to the fastening. First, let's decide on the length of each shelf and the number of pots. If we make a stand for the windowsill, then we can run it along the entire space.
• Then we outline the locations of the pots on the boards. To do this, put one of them, screwing upside down. We circle it along the diameter of the upper part. Then we retreat from the circle the verified distance and circle the following locations of the flowers.
• Using a jigsaw, we cut out these circles. It's easier to do this. Drill a hole at one of the points of the line with a drill. Then we insert a jigsaw file into it and cut it out in a circle.
• If the resulting hole came out with chips, then we go along it with sandpaper.
• We make holes for fastening. To do this, we drill them with a drill with a large diameter at the corners of each board. The holes must be at the same distance.
• Then we form two large pieces of rope (about 2-3 m.). It should be twisted and strong enough. We stretch one of them through the left holes in the boards. Better to do this from the bottom up. We tie a rope under each hole and above it with a knot. This will help keep the boards in place. It is better to start connecting the shelf from the upper holes. Then you need to leave a little rope for hanging the structure and put it down again through the lower holes. We do the same with the other cut and the opposite side.
• On the upper part of the window opening, we outline the points for attaching the stand. The distance between them is equal to the length of the boards. We drill them with a drill, and then we mount an anchor bolt into the holes. Make sure the mount sits securely in the concrete.
• We paint an almost finished stand with any acrylic paint. If your flowers require periodic spraying, then the surface should be covered with a waterproof varnish or any means for protecting wood indoors. After the boards are dry, we hang it by the anchor bolts. At the end, we plant flowers in pots, through which the holes were circled. We carefully insert them into the holes of the stand.

Today, almost all houses and summer cottages are decorated with fresh flowers. They enliven the room, make the air cleaner, and lift the mood. To save space or create a pot arrangement, flower stands are usually used. But store copies are quite expensive and do not please with a variety of designs. Therefore, creative people who want to create interior items with their own hands may well make a flower stand themselves.

The main types of stands for flowers:

• forged coasters. Flowers look very elegant in them. They are durable, reliable and have an elegant look, but making them yourself at home most likely will not work, unless you are, of course, a master professional;
• wooden coasters. This option is most common. They are more economical and suitable for any interior. The easiest way to make a do-it-yourself flower stand is from wood. The material can serve as boards, chipboard, natural material, for example, a piece of log with branches sticking out in different directions, etc. To make the wooden stand look even better, it is usually varnished;

• metal flower stands. Such stands, as well as forged ones, cannot be made independently. The exception is combined products, in which the bases for the pots are made of wood, and ready-made metal pipes with a section of 25 mm are used for the supports. But if you nevertheless tuned in to metal flower stands, due to their reliability and resistance to external influences, then you will have to buy ready-made ones;
• flower stands, which are a composition of several different items. There are no longer any rules and features. It all depends on the imagination and the amount of free space. Below is a master class on making one of the options for such stands for flowers, and a photo as illustrations.

Master class # 1: flower stand + decorative bird bath

Such a stand is more suitable for decorating a yard or an open veranda. For her, you can use pots of different shapes, or you can use the same. The color in which they will be painted depends on your idea and taste preferences. In our case, the pots are one color, but you can paint them in different colors.

For work we need:

• one large and tall pot that will serve as the base;
• four smaller flower pots;
• one pot, which will be at the very top. It is smaller in size than the base, but larger than the intermediate pots. A decorative bath will be attached to it;
• metal bar as a support for the entire structure. If the store does not find the size you need, then you can buy a longer one and cut it with a hacksaw for metal;
• spray paint;
• spray primer;
• a small ceramic bird figurine;
• water-repellent glue.

The sequence of work is as follows:

• priming the surface of the pots and, after drying, paint it. The color can be one or several, according to your taste;
• we measure and add up the height of all pots, add 600 mm to them and thus calculate the height of the support rod. Using a hacksaw for metal, cut off a piece and hammer it into the ground by 600 mm. This action will provide the structure with a stable position;
• put a pot-base on the rod through the hole in the bottom, set it straight and fill it with earth;

• then we put on all subsequent pots, one after another on the rod, fill with earth and tilt alternately to the right and then to the left;
• we install the uppermost pot directly, like the base, to it we attach a plastic or ceramic bath prepared in advance. We glue a bird figurine to its edge and keep it for a day until it dries completely;
• after all the work is over, we plant flowers and enjoy the result.

Master class number 2: hanging flower stand

For placement on a veranda or indoors, a hanging flower stand is most suitable. Wood and rope are the basic materials needed to make it. You can place flowers on it that you do not want to hide on the windowsill behind the curtains.

To make it we need:

• wooden board or shelves from old furniture;
• rope, not thick, but not thin either;
• flower pots, in our case four pieces, but you can take at will;
• jigsaw;
• drill;
• paint and brushes;
• metal ring.

• in order to provide the product with the necessary strength, the wooden bases into which the pots will be inserted should be made a couple of centimeters wider than the pot itself. To achieve this, attach the pot to the board with the wide side, circle it with a pencil, and then, measuring 2 cm in each direction, draw a square. This will be the size of the base. We draw such squares according to the number of pots;

• To outline the line for the inner cut, cut out a round template from cardboard paper. Its diameter should be 15-20 mm less than the outlined pot. After the template is made, circle it inside each of the base squares;

• now you need to cut a hole into which the pot will be inserted. To do this, attach the square with a clamp to the work table, make a hole in the middle with a drill, insert a jigsaw through this hole and cut out the inner circle. In the process of work, be careful and do not rush so as not to spoil the product;

• After the holes for the pots have been cut in all the base squares, drill holes for the ropes in all corners of each of them. Care must be taken to ensure that the holes on all squares are in the same places;

• now you can think about design as well. Paint the wooden parts with paint of different colors or stain, depending on the style and interior of the room. The rope also needs to be dyed, we have chosen black, but you can use any color you like. To do this, use acrylic paint;

• this is followed by the assembly of the structure. It must be produced taking into account the height of the plants that will be installed in the bases. We start the assembly from the top: threading the four ends of the rope into the ring, pull them into the corner holes of the first square and tie them to a knot under it to fix;

• in a similar way, we fix all the squares-bases for the pots on a rope, and cut the remaining ends under the last of them;
• then insert the pots and hang the stand in the desired location.

Master class number 3: floor stand for flowers

This stand with graceful curved legs will brighten up any room. It consists of a triangular base with rounded sides on which the pot will stand, a slightly smaller shelf of the same shape, and three curved metal legs.

To make the curved legs, you will have to bend the metal tubes yourself. A special bending template will help us with this.

We need materials:

1. For the stand:

• 2 pieces of waterproof plywood 24 mm thick - one 37x37 cm, and the second 22x22 cm;
• 3 copper pipes with a diameter of 1.5 cm and 68 cm in length;
• 3 sticks with balls at the ends for the legs;
• polyurethane glue.

2. For a template:

• a piece of fiberboard or MDF 40x80 cm;
• 5 bars 2x4x10 cm;
• clamps, screws.

Manufacturing sequence:

• on the pieces intended for the shelves, we make markings using a compass;
• cut out the parts with a jigsaw, grind the edges with sandpaper;
• draw medians on the base under the flower pot so that even ones appear along the rounded sides. We place the shelf exactly in the center, press it tightly and drill three holes in its corners. The drill must go through both parts;
• we grind the edges of the shelves with sandpaper;
• we fix the wooden balls used for the legs with a vice and drill holes in them;
• we open the wooden parts with a layer of varnish, dry them, lightly grind them with sandpaper and apply another layer;
• we also grind metal legs, apply varnish or paint;
• we insert the legs into the holes on the upper shelf, and at the level of the small shelf, rewind them with double-sided tape and glue them;
• a bar with a ball-shaped tip is inserted into the hole in the pipe leg and, for greater reliability, we fix it with glue.

Making a template and giving the legs a curved shape:

• mark the plate around the circumference and attach the bars to it with screws;
• the tubes themselves are carefully pressed to the bars by means of clamps;
• after the clamps are relaxed, the pipes are sprung.

A beautiful stand for flowers, assembled by hand from wooden or metal parts, serves as part of the overall design of a room or site. Greenery and structural elements complement each other, so they should not cause feelings of disharmony.

Often, bent and forged metal, natural wood (driftwood, fin) are chosen for the coasters. But the object used as a stand may be completely innocent of nature - the beauty of the composition in this case is achieved through contrast. These are the coasters made of scrap materials and old things. The florist's fantasy also turns unexpected objects into the perfect complement to flowering plants.

How to make simple flower stands?

For those who have the skills to work with a welding machine, it will not be difficult to make flower stands out of metal. From a thin bar and welding wire with a diameter of 0.5-1 cm, you can make many options for floor and hanging plant shelves. The simplest thing is to twist several pieces of wire into a tight bundle, spread their ends to the sides and weld small shelves to them. From the bottom, the ends are parted so as to form a stable base.

But those who are deprived of the opportunity to work with stubborn and hard metal need even simpler methods. Original stands can be made of wooden planks or plywood with a thickness of at least 1 cm. For work you will need:

• board or plywood;
• durable and decorative cord;
• drill and drill, the diameter of which corresponds to the thickness of the rope;
• sandpaper;
• varnish or paint.

Wooden shelf parts can be square or rectangular. At a distance of 3-4 cm from the edge, holes must be drilled in the corners. Measure the rope so that its length corresponds to the total size of the shelf, multiplied by 2, plus another 20-25 cm. Next, you should find the middle of each segment and tie them so that the knot is located approximately in this place. Thread the ends through the holes 1 of the plank, align the knot in its center and fix the cord by tying knots just above the holes at each end of the rope.

Then measure the required height of the next shelf, make nodes to support it. If the cord is thin and there are fewer holes, then a small piece of a strong stick should be inserted into each knot. The rest of the parts should be fixed in the same way. The flower stand should be suspended from a sturdy hook screwed into the ceiling.

Another option for a simple stand for wall mounting can be made from leather or canvas straps. To do this, you need to take measurements taking into account the width of the board and the length of the fasteners above it. Fold the belt sections in half, aligning the ends. Attach them to the wall at the required height with nails or self-tapping screws with dowels, aligning the caps flush.

Sand, varnish or paint the shelf board. Insert it into the resulting loops so that it is perpendicular to the wall. You can put small pots with ampelous plants on the shelf.

Reliable stands for large flowers

To make such simple but reliable stands, you need a hacksaw or electric saw. It is better to use wood screws of sufficient length as fasteners. You will need a screwdriver to install them. You can also connect the parts with nails.

The best material for the racks is a 5x5 cm wooden bar. Instead of a bar, you can use even thick branches of a tree, then the structure will acquire a natural style.

The length of the supports can be chosen arbitrarily. Before you make a do-it-yourself flower stand from such material, you need to determine its design. There are 2 options:

• double-sided floor stand for flowers has an A-shaped profile of the supports;
• one-sided wall-mounted model consists of vertical and inclined posts.

The racks in both cases are connected by shelves for flower pots located at different levels. With an inclined arrangement of the supports, the shelves are located so that they do not interfere with the plants of the lower row. In whatever version a wooden stand is made, the collection of indoor plants will resemble a green slide.

Having measured the bars for the racks, the lower parts of the inclined supports must be cut to an angle that will correspond to the angle of inclination. In the upper part, you can connect them closely, choosing a piece of wood and superimposing the very ends of the posts on top of each other. If desired, the supports can be crossed by making the recesses for the connection just below. To make the stand stable and strong, a crossbar is installed between the supports. Its fastening is carried out in the same way, in a half-tree way, if desired, leaving protruding ends.

Having made 2-3 identical supports, they are connected with shelves made of board or plywood 1.5-2 cm thick. For fastening, use a metal furniture corner or short bars nailed to the supports at the desired height. After the stand is ready, it is varnished or painted, decorated with natural material or carved wooden details.

Metal stand

A simple but convenient option is shelves of different heights from the corner. Outwardly, the structure resembles several parallelepipeds with 2 common faces. Its assembly begins with the rack, which is the highest.

On a pre-drawn sketch, mark the size of the tallest of the pedestals connected together. Measure 4 equal lines for vertical supports and 8 for horizontal edges. Connect by welding, making 2 squares or rhombuses from short segments. They must be exactly the same, otherwise the design will skew.

The finished horizontal edges must be connected with vertical (long) posts. The do-it-yourself parallelepiped of the highest floor stand is complemented with side low parts:

1. Weld a cross member between the uprights at a height corresponding to the next shelf.
2. Make a rectangle, the length of which is the same measurement, and the width is the distance between the vertical supports of the high stand.
3. Cut 4 pieces to determine the dimensions of the lower stand. With their help, connect a rectangle from a corner and the same one formed by verticals and a crossbar on a large shelf. If desired, make an even lower stand using the same algorithm.

A floor slide made of metal parts can be made angular. To do this, the metal racks of the lower shelves must be welded to the adjacent sides of the highest rack. Each wing can be continued by adding the next level of shelves and welding them to the sides of the previously made ones.

Sophisticated and beautiful coasters

A woman can also make such if she has welding skills. Bending a welding wire with a diameter of 0.5-1 cm according to a template is possible with tools for cold forging (bends, templates, etc.) and a hammer weighing about 0.8 kg. Having drawn a sketch, you need to break it down into simple elements and determine the size of each part.

If you have many of the same parts, you can use metal templates. By driving the wire between the turns of the template with a hammer, it is easy to get identical arcs, spirals, curls, from which the forged pattern is assembled by welding them together.

How to make a stand for flowers from openwork elements can only be suggested by the imagination of the person who creates it. Most often these are natural forms: curved branches and tree trunks. Leaves and flowers are live plants placed on a stand.

In garden design, the same stands are used, on which containers and flowerpots with beautifully flowering and fragrant annuals are placed. Petunias and carnations, scented tobacco, mattiola and other flowers create living columns or hedges. Stands in the form of trellises are placed near perennial climbing roses and vines.

Natural material coasters

Floor and table stands made of natural material can decorate the interior of almost any style. They are appropriate even in a minimalist atmosphere, you just need to make them as laconic as possible.

The material for the stands will be bizarrely curved branches, driftwood, and fin. The natural shape does not even need to be supplemented. Sometimes the grooves or hollows of the wooden base are ideal for placing containers. A high stand for flowers from a trunk or branch will require mounting shelves or rings where you can put flower pots.

Having found a suitable piece of wood, they clean it of rotten areas and exfoliated bark. Having thoroughly cleaned out all defects to healthy wood, they determine the position of the driftwood in space: floor stands can be both horizontal and vertical. If stability is required from the driftwood, then from below you need to attach a wide base from a saw cut of wood or supplement the stand with a detail that will support it.

To strengthen a flower on such a rack, you will need to install a small shelf from a saw cut or a plank. You can also install a ring made of stiff wire 0.3-0.5 cm thick. You can strengthen it by drilling deep vertical holes in the wood. The ends of a wire bent in the form of an open circle with protruding edges are driven into them.

The shelves are fastened at the ends of exactly sawn-off branches. If desired, the shelf can be fixed directly on the body of a shapeless driftwood or tree stump. The fasteners are self-tapping screws and a corner.

From a small picturesque part of a tree, you can make a table stand for a cactus or other slowly growing flower. Such plants can be placed in the natural groove of the driftwood. Having adjusted the hole to the size of the pot, the wood is sanded and varnished, trying to preserve its natural beauty. Sculptures of small animals (lizards, snakes) or insects can serve as decor.

The flower stand can be made from different materials. Traditionally, it is metal or wood, as they combine light weight and ease of processing. Decorative stands require complex processing, but the driftwood has already been processed by nature itself. Decorating old things such as shelves or ladders, you can come up with completely exclusive coasters based on them.