Caring for a summer cottage is not limited to weeding beds and planting new plants. The aesthetic side of the issue is also worth paying attention to if you want to give the garden a proper appearance. However, faced with the high prices of garden decorations in stores, many abandon this idea, considering it too costly. Consider how you can make original crafts for the garden with your own hands: all the new items and some traditional options.

Do-it-yourself garden decor is a great opportunity not only to decorate the territory in an original way, but also get rid of a lot of unnecessary things in the house. For crafts, various unused items are suitable that can find a new life as a garden decoration. Here are just a few options for what you can use as a base:

• used tires;
• old unnecessary furniture and vehicles;
• dishes, plastic bottles, jars;

• old household appliances;
• clothing and footwear;
• pieces of pipes or fittings;
• stumps, branches or snags.

We are accustomed to throwing all this away as unnecessary trash, while with proper design any of these elements can become a worthy decoration of the garden.

Do-it-yourself crafts for giving, garden, yard

It is worth starting the design of the site by studying photos of crafts for the garden and garden with your own hands. Looking through the available options, you can accurately repeat the solution you like or come up with your own based on it, adapting it to existing conditions, opportunities and preferences.

The simplest traditional design of flower beds involves the use of pots, flowerpots or ordinary wooden boxes. For the same purpose, old tires are suitable.

Another option for decorating a garden is to use garden sculptures made from natural materials or any unnecessary items. Here are some simple ideas that don't require too much effort to implement:

• the easiest way is to use branches and stumps, which are always enough in garden plots. With their help, you can create sculptures of animals, castles and more. Such an element will be an excellent decoration for a flower bed, an area near a gazebo or lawn;
• you can make a sculpture of concrete or cement, using a special form for this, into which the composition is poured in liquid form;

Helpful advice! Any cement or concrete structures require additional reinforcement. To avoid the destruction of the sculpture or the appearance of cracks, reinforcement must be laid in the foundation.

• abstract figures can be made using wire or rebar. Two options are possible here: leave the structure hollow inside or fill it with earth, after wrapping it with burlap or mesh. In the second case, you can use the sculpture as a basis for planting;

• a traditional garden scarecrow can be made using waste clothing. Contrary to prejudice, such an element may well become a worthy decoration of the site, especially if you use the image of some famous character as an idea for its design.

In order for the made element to retain its original appearance for a long time, it is very important to choose the right finishing materials for it. First of all, this concerns the used paints and varnishes. Acrylic paint, cold enamel or paint designed for glass work is best suited. A durable varnish will provide reliable protection for the coating.

Browse waste garden craft ideas. So, you can get rid of a lot that is a pity to throw away, giving it a new life and at the same time decorating the local area. A great example would be DIY garden crafts from computer disks.

Crafts for the garden with your own hands from improvised materials with a description

Spring garden crafts differ in what materials you need, as well as in the complexity of manufacturing technology. Consider a few not too complicated options that can be implemented with minimal time and effort.

Do-it-yourself crafts for giving: photos and instructions for creating painted stones

Using stones to decorate a garden is a classic technique that has been used for a long time. However, it is not necessary to keep their original appearance. Elements decorated with an original pattern will look much more interesting. For example, you can paint stones under cacti, thus creating an interesting decor element.

Technology for making cacti from stones:

• with the help of dark green paint applied to the stones, the base of the cactus is created;
• then, using a lighter shade of green and a thin brush, characteristic stripes and dots are applied;
• dried stones are covered with a layer of varnish and placed in pots or flowerpots, previously filled with stone chips.

Another option involves the use of larger stones to decorate a summer cottage. With the help of paint on their surface, you can depict various animals, houses, cars, etc. The easiest way is to initially draw a drawing with a simple pencil, and then decorate it with acrylic paints.

Helpful advice! Such elements will be an excellent decoration of the territory if you have a decorative pond in your country house.

Original design of flower beds and flower beds with your own hands: new items of all crafts

Speaking of decorating flower beds, it means a number of the most diverse elements that can transform the appearance of even the most ordinary flower bed. Sizes, as well as color solutions are practically unlimited, and you can choose the option that will look most advantageous on your site:

• using ordinary bricks or stumps, you can create flower beds called "alpine hills". The main thing is to provide the elements with a good connection with each other so that the design is strong and reliable;
• using a small motor, you can make a small one, decorated with flowers on all sides;
• crafts from tires for the garden are very popular. There are many design options for flower beds with their help, both the simplest and hanging and multi-tiered;
• you can fill with earth and plant flowers inside almost any unnecessary element, including torn boots, ceramic dishes or furniture.

Helpful advice! Be sure to consider using hanging elements to decorate your garden. Decorations placed on several levels look much more advantageous.

Crafts from plastic bottles for the garden: photos and descriptions of the best ideas

A huge amount of a wide variety of plastic containers is thrown away as garbage, while bottles can be an excellent raw material for making many original garden decorations. Consider some interesting ideas for their use with step-by-step instructions for making.

Palm tree from plastic bottles for decorating a summer cottage

In order to make a palm tree from plastic bottles, you will need the following set of materials:

• bottles of brown and green plastic (preferably several different shades);
• sharp scissors;
• awl;

• rods for the base with a length of at least 25 cm (metal or willow can be used);
• metal bushings;
• tubes with a diameter of 2 cm;
• high voltage cable (preferably 12-14 mm).

First of all, you need to cut the brown plastic bottles into two parts to get their bottom plus a small margin. In the lower part, you need to make a hole of such a diameter that the twig of your choice passes through it. We also cut the green bottles, but in such a way as to separate the bottom and about 1 cm above it. After that, the bottle is cut lengthwise into 3 equal parts (up to the point where the narrowing to the neck begins). In this case, you need to save the neck.

In order to make the leaves look like real ones, the edges are cut in such a way that notches are obtained. After that, the finished elements can be put on the cable. As a result, we get branches, which will later be attached to the trunk. One tree should have 7 branches.

After that, you can begin to assemble the structure: the rods are securely fixed in the ground, forming a base. The easiest way to achieve this is to pre-weld them to a sheet of metal, placing them at a different angle of inclination. After that, tubes are attached to them and bushings are put on. The length of each rod should correspond to the number of brown details that will be arranged in a row and another 3 cm margin for leaves.

Related article:

Photo examples for registration. Plants and garden structures in decoration. Optimal zoning options.

Having assembled the structure, it is securely fixed in the place where it will be installed. Most often, such an element is located near small artificial reservoirs or flower beds.

Helpful advice! If you use rods of different diameters, you can create a whole composition that imitates an oasis.

Do-it-yourself gnomes from plastic bottles: photos of crafts for the garden with a step-by-step description

How well the figures of garden gnomes look in the design of plots, we know from fashion magazines and modern films. But not everyone knows that such beauty can be made from improvised materials. Consider how you can make such an ornament without spending a lot of effort and money on it.

Since the gnome needs to be large enough to be visible in the garden, a 5 or 6 liter plastic bottle should be taken as a base. In addition, you will need paints for decorating, brushes, an awl, glue that can glue plastic parts together, as well as various little things that you want to decorate your creation with: a beard, eyes, a strap, etc.

First of all, you need to paint the bottle in the main color. This must be done from the inside to avoid washing off and damaging the layer. The easiest way to do this is to pour the paint inside and twist the container so that only the bottom 2/3 of the container is colored. It is important to wait until the paint is completely dry.

At this time, you can start preparing the details for decoration. For their manufacture, plastic bottles of a smaller volume are perfect. By applying paint with a brush, you can make a sleeve gnome from small containers. If you paint the bottom of the bottles in beige, you can make them look like hands.

The connection of these elements is carried out by cutting holes of suitable diameter and additional fixation with wire and special glue. In the same way, we fasten the gnome's nose, made from an ordinary cap.

Helpful advice! The easiest way to draw eyes and lips is using a regular brush and paint, but for the best effect, you can purchase ready-made elements designed for dolls.

In order for the figurine to be stable enough and not fly away at the first gust of wind, sand or earth must be poured inside the barrel.

The original design of the site: garden crafts from mayonnaise buckets

You can also make beautiful and original decorations for the street using such an unusual element as plastic mayonnaise buckets. The main condition is that the design is resistant to external factors and looks beautiful. Therefore, it is imperative to open the finished craft with waterproof varnish.

Other subtleties that must be observed are to take into account the future location of the craft. For example, if it is located under a canopy or in a gazebo, then it is quite acceptable to use various fabric or paper elements.

Installing or fastening flower pots from a mayonnaise bucket also matters. By themselves, they are light enough that they must be filled or fixed to ensure stability. If you fill the buckets with earth and flowers, then they, on the contrary, will be quite heavy, so if you plan to hang them, make sure the rope is strong and reliable in advance.

Helpful advice! You can always attach the installed bucket to the surface with self-tapping screws or glue, thus ensuring the most durable fixation.

Prepare in advance all the materials necessary for work: paints, brushes, waterproof varnish, napkins if you want to do decoupage, as well as other small items that will serve as decoration, such as beads, pebbles, beads or small insect figurines that you can buy in store.

Ideas for a garden and a kitchen garden with your own hands: a flower pot from a bucket for mayonnaise

Making a planter out of a bucket of mayonnaise is the easiest and most common option that is used to decorate the garden. In this case, the best design is obtained if you use the decoupage technique. So, you can not only create bright colored pots, but also make whole works of art: unique and inimitable. Moreover, this technique will be a great solution for those who are not very good at drawing.

In order to make the original pot in this way, you need to follow the following algorithm:

• the bucket must be degreased by wiping it, for example, with alcohol;
• then use a sponge and apply one or two coats of white paint to the surface;

• while the paint is drying, prepare the napkin elements that you like with the pattern. Thematically, it can be anything: flowers, animals, patterns;
• separate the top layer from the napkin, the one on which the pattern is applied;

Helpful advice! For a more aesthetic appearance of the finished pot, the edges of the napkins used are recommended not to be cut, but to be carefully cut off. So, the joints will be almost invisible.

• apply a layer of PVA glue to the bucket and carefully attach and straighten the pictures from above;
• after complete drying, open the finished product with varnish.

Crafts from tires for the garden with your own hands

The areas in which old car tires can be used cannot even be listed. And the design of the suburban area is no exception. Home-made playgrounds made using this material, as well as flower beds and flower beds, are very popular. On the network you can find many different workshops for crafts from tires for the garden with your own hands. Consider a few simple design options.

The most primitive option is a round flower bed made from a car tire. It is difficult to call such a creation a masterpiece, however, with proper design, it can also serve as a decoration for the garden. A little more complicated, but much more spectacular - a flower bed of several tires, located one on top of the other.

To give interesting effects, you can use tires of different diameters, placing the larger one on the bottom and gradually reducing the size. Hanging flower beds from tires also look great. If you leave the disk inside and properly fix it, then earth can be poured inside. The main thing is to take care of a reliable fastening, since the total weight of such a structure will not turn out to be too small.

Crafts from polyurethane foam for the garden and vegetable garden with your own hands: photo examples and tips

Another unusual material that has also found its use in decorating a garden exterior is polyurethane foam. Due to a number of characteristics, such as light weight, ease of processing, insensitivity to rain and temperature changes, this material is extremely suitable for garden crafts. This solution will be an excellent alternative to do-it-yourself gypsum crafts for the garden.

The first thing you should pay attention to is the manufacturer's recommendations indicated on the cylinder with the purchased mixture. By itself in the cylinder has a liquid consistency and hardens due to contact with air. As a rule, it takes 10-12 hours for it to dry completely.

Helpful advice! Do not forget about personal safety measures in the process of working with polyurethane foam. How exactly to protect yourself - you will also be prompted by the information provided by the manufacturer on the cylinder.

Here are some simple tips for working with this material:

• polyurethane foam does not like cold, so it is better to work with it at positive air temperature;
• before starting work, the cylinder must be thoroughly shaken;
• in the process of squeezing the foam, hold the can with the cap down. So, the gas from the cylinder will not come out, and you can use all the foam that is in it;
• observe the recommended (usually 10-15 minutes) interval between coats. Otherwise, the uncured foam may fall off under the weight of the following layers;
• to make it more convenient to work with foam, you can use a special mounting gun.

DIY Foam Garden Craft Ideas

Looking through a photo of a garden with your own hands, for the design of which figures from polyurethane foam are used, you can see that the possibilities of this material are practically unlimited, and with its help you can create a wide variety of sculptures. However, in order for the figure to turn out to be strong, it is necessary to provide it with a strong and reliable frame. For this purpose, you can use plastic or tin bottles, as well as wood, wire or fittings.

For example, to make a snail, it is enough to follow a simple algorithm:

• on a pre-prepared surface (you can do this on a regular table covered with oilcloth), apply the first layer of foam, which will become the base;
• after drying, apply a second layer of foam and insert a plastic bottle into it, which will act as the snail's neck;
• cover the plastic bottle with foam and give it the desired shape with your hands;
• the head and horns of the snail are also shaped by hand;
• to make a shell, apply foam to the body of the snail, giving it an appropriate rounded shape. At this stage, you can insert a small bucket or pot into the shell, designed for planting flowers;
• using the same foam, make characteristic curls on the snail shell. Use paint and foam to decorate the resulting craft.

A foam frog can be made as follows:

• use an old pot and jar as a base. Fill them with foam and let dry. The pan will play the role of the body, and the jar will become the head of the frog. In order for the structure to be solid, it is recommended to fasten the parts with a wire;
• in order for the frog to have legs, use a sufficiently strong wire, also covered with mounting foam;
• give a characteristic shape to the foam that has not yet hardened with your hands;
• use the paint to give the frog the color you want and give it the eyes.

To give stability to the resulting figures, sand can be poured inside the containers used. Then it will turn out to be more stable and will not succumb to strong gusts of wind. All inaccuracies and extra pieces of foam can be easily removed with a clerical knife, giving the sculpture the most accurate shape. And in order for the foam figure to serve you longer, you can additionally apply a layer of putty on it, which will perform a protective function.

Helpful advice!In the process of decorating garden sculptures, you can use LED lighting. So, in the evening, the figurine will glow, and create a unique festive atmosphere in the garden.

Decorating your own garden is easy, and there are many ideas you can use for this purpose. After all, not only flowers and trees can help you properly arrange the territory. DIY crafts will be an excellent alternative to purchased models, giving your site a unique look and adding a unique zest to its appearance.

Caring for a summer cottage is not limited to weeding beds and planting new plants. The aesthetic side of the issue is also worth paying attention to if you want to give the garden a proper appearance. However, faced with the high prices of garden decorations in stores, many abandon this idea, considering it too costly. Consider how you can make original crafts for the garden with your own hands: all the new items and some traditional options.

Do-it-yourself garden decor is a great opportunity not only to decorate the territory in an original way, but also get rid of a lot of unnecessary things in the house. For crafts, various unused items are suitable that can find a new life as a garden decoration. Here are just a few options for what you can use as a base:

• used tires;
• old unnecessary furniture and vehicles;
• dishes, plastic bottles, jars;

• old household appliances;
• clothing and footwear;
• pieces of pipes or fittings;
• stumps, branches or snags.

We are accustomed to throwing all this away as unnecessary trash, while with proper design any of these elements can become a worthy decoration of the garden.

Do-it-yourself crafts for giving, garden, yard

It is worth starting the design of the site by studying photos of crafts for the garden and garden with your own hands. Looking through the available options, you can accurately repeat the solution you like or come up with your own based on it, adapting it to existing conditions, opportunities and preferences.

The simplest traditional design of flower beds involves the use of pots, flowerpots or ordinary wooden boxes. For the same purpose, old tires are suitable.

Another option for decorating a garden is to use garden sculptures made from natural materials or any unnecessary items. Here are some simple ideas that don't require too much effort to implement:

• the easiest way is to use branches and stumps, which are always enough in garden plots. With their help, you can create sculptures of animals, castles and more. Such an element will be an excellent decoration for a flower bed, an area near a gazebo or lawn;
• you can make a sculpture of concrete or cement, using a special form for this, into which the composition is poured in liquid form;

Helpful advice! Any cement or concrete structures require additional reinforcement. To avoid the destruction of the sculpture or the appearance of cracks, reinforcement must be laid in the foundation.

• abstract figures can be made using wire or rebar. Two options are possible here: leave the structure hollow inside or fill it with earth, after wrapping it with burlap or mesh. In the second case, you can use the sculpture as a basis for planting;

• a traditional garden scarecrow can be made using waste clothing. Contrary to prejudice, such an element may well become a worthy decoration of the site, especially if you use the image of some famous character as an idea for its design.

In order for the made element to retain its original appearance for a long time, it is very important to choose the right finishing materials for it. First of all, this concerns the used paints and varnishes. Acrylic paint, cold enamel or paint designed for glass work is best suited. A durable varnish will provide reliable protection for the coating.

Browse waste garden craft ideas. So, you can get rid of a lot that is a pity to throw away, giving it a new life and at the same time decorating the local area. A great example would be DIY garden crafts from computer disks.

Crafts for the garden with your own hands from improvised materials with a description

Spring garden crafts differ in what materials you need, as well as in the complexity of manufacturing technology. Consider a few not too complicated options that can be implemented with minimal time and effort.

Do-it-yourself crafts for giving: photos and instructions for creating painted stones

Using stones to decorate a garden is a classic technique that has been used for a long time. However, it is not necessary to keep their original appearance. Elements decorated with an original pattern will look much more interesting. For example, you can paint stones under cacti, thus creating an interesting decor element.

Technology for making cacti from stones:

• with the help of dark green paint applied to the stones, the base of the cactus is created;
• then, using a lighter shade of green and a thin brush, characteristic stripes and dots are applied;
• dried stones are covered with a layer of varnish and placed in pots or flowerpots, previously filled with stone chips.

Another option involves the use of larger stones to decorate a summer cottage. With the help of paint on their surface, you can depict various animals, houses, cars, etc. The easiest way is to initially draw a drawing with a simple pencil, and then decorate it with acrylic paints.

Helpful advice! Such elements will be an excellent decoration of the territory if you have a decorative pond in your country house.

Original design of flower beds and flower beds with your own hands: new items of all crafts

Speaking of decorating flower beds, it means a number of the most diverse elements that can transform the appearance of even the most ordinary flower bed. Sizes, as well as color solutions are practically unlimited, and you can choose the option that will look most advantageous on your site:

• using ordinary bricks or stumps, you can create flower beds called "alpine hills". The main thing is to provide the elements with a good connection with each other so that the design is strong and reliable;
• using a small motor, you can make a small one, decorated with flowers on all sides;
• crafts from tires for the garden are very popular. There are many design options for flower beds with their help, both the simplest and hanging and multi-tiered;
• you can fill with earth and plant flowers inside almost any unnecessary element, including torn boots, ceramic dishes or furniture.

Helpful advice! Be sure to consider using hanging elements to decorate your garden. Decorations placed on several levels look much more advantageous.

Crafts from plastic bottles for the garden: photos and descriptions of the best ideas

A huge amount of a wide variety of plastic containers is thrown away as garbage, while bottles can be an excellent raw material for making many original garden decorations. Consider some interesting ideas for their use with step-by-step instructions for making.

Palm tree from plastic bottles for decorating a summer cottage

In order to make a palm tree from plastic bottles, you will need the following set of materials:

• bottles of brown and green plastic (preferably several different shades);
• sharp scissors;
• awl;

• rods for the base with a length of at least 25 cm (metal or willow can be used);
• metal bushings;
• tubes with a diameter of 2 cm;
• high voltage cable (preferably 12-14 mm).

First of all, you need to cut the brown plastic bottles into two parts to get their bottom plus a small margin. In the lower part, you need to make a hole of such a diameter that the twig of your choice passes through it. We also cut the green bottles, but in such a way as to separate the bottom and about 1 cm above it. After that, the bottle is cut lengthwise into 3 equal parts (up to the point where the narrowing to the neck begins). In this case, you need to save the neck.

In order to make the leaves look like real ones, the edges are cut in such a way that notches are obtained. After that, the finished elements can be put on the cable. As a result, we get branches, which will later be attached to the trunk. One tree should have 7 branches.

After that, you can begin to assemble the structure: the rods are securely fixed in the ground, forming a base. The easiest way to achieve this is to pre-weld them to a sheet of metal, placing them at a different angle of inclination. After that, tubes are attached to them and bushings are put on. The length of each rod should correspond to the number of brown details that will be arranged in a row and another 3 cm margin for leaves.

Related article:

Photo examples for registration. Plants and garden structures in decoration. Optimal zoning options.

Having assembled the structure, it is securely fixed in the place where it will be installed. Most often, such an element is located near small artificial reservoirs or flower beds.

Helpful advice! If you use rods of different diameters, you can create a whole composition that imitates an oasis.

Do-it-yourself gnomes from plastic bottles: photos of crafts for the garden with a step-by-step description

How well the figures of garden gnomes look in the design of plots, we know from fashion magazines and modern films. But not everyone knows that such beauty can be made from improvised materials. Consider how you can make such an ornament without spending a lot of effort and money on it.

Since the gnome needs to be large enough to be visible in the garden, a 5 or 6 liter plastic bottle should be taken as a base. In addition, you will need paints for decorating, brushes, an awl, glue that can glue plastic parts together, as well as various little things that you want to decorate your creation with: a beard, eyes, a strap, etc.

First of all, you need to paint the bottle in the main color. This must be done from the inside to avoid washing off and damaging the layer. The easiest way to do this is to pour the paint inside and twist the container so that only the bottom 2/3 of the container is colored. It is important to wait until the paint is completely dry.

At this time, you can start preparing the details for decoration. For their manufacture, plastic bottles of a smaller volume are perfect. By applying paint with a brush, you can make a sleeve gnome from small containers. If you paint the bottom of the bottles in beige, you can make them look like hands.

The connection of these elements is carried out by cutting holes of suitable diameter and additional fixation with wire and special glue. In the same way, we fasten the gnome's nose, made from an ordinary cap.

Helpful advice! The easiest way to draw eyes and lips is using a regular brush and paint, but for the best effect, you can purchase ready-made elements designed for dolls.

In order for the figurine to be stable enough and not fly away at the first gust of wind, sand or earth must be poured inside the barrel.

The original design of the site: garden crafts from mayonnaise buckets

You can also make beautiful and original decorations for the street using such an unusual element as plastic mayonnaise buckets. The main condition is that the design is resistant to external factors and looks beautiful. Therefore, it is imperative to open the finished craft with waterproof varnish.

Other subtleties that must be observed are to take into account the future location of the craft. For example, if it is located under a canopy or in a gazebo, then it is quite acceptable to use various fabric or paper elements.

Installing or fastening flower pots from a mayonnaise bucket also matters. By themselves, they are light enough that they must be filled or fixed to ensure stability. If you fill the buckets with earth and flowers, then they, on the contrary, will be quite heavy, so if you plan to hang them, make sure the rope is strong and reliable in advance.

Helpful advice! You can always attach the installed bucket to the surface with self-tapping screws or glue, thus ensuring the most durable fixation.

Prepare in advance all the materials necessary for work: paints, brushes, waterproof varnish, napkins if you want to do decoupage, as well as other small items that will serve as decoration, such as beads, pebbles, beads or small insect figurines that you can buy in store.

Ideas for a garden and a kitchen garden with your own hands: a flower pot from a bucket for mayonnaise

Making a planter out of a bucket of mayonnaise is the easiest and most common option that is used to decorate the garden. In this case, the best design is obtained if you use the decoupage technique. So, you can not only create bright colored pots, but also make whole works of art: unique and inimitable. Moreover, this technique will be a great solution for those who are not very good at drawing.

In order to make the original pot in this way, you need to follow the following algorithm:

• the bucket must be degreased by wiping it, for example, with alcohol;
• then use a sponge and apply one or two coats of white paint to the surface;

• while the paint is drying, prepare the napkin elements that you like with the pattern. Thematically, it can be anything: flowers, animals, patterns;
• separate the top layer from the napkin, the one on which the pattern is applied;

Helpful advice! For a more aesthetic appearance of the finished pot, the edges of the napkins used are recommended not to be cut, but to be carefully cut off. So, the joints will be almost invisible.

• apply a layer of PVA glue to the bucket and carefully attach and straighten the pictures from above;
• after complete drying, open the finished product with varnish.

Crafts from tires for the garden with your own hands

The areas in which old car tires can be used cannot even be listed. And the design of the suburban area is no exception. Home-made playgrounds made using this material, as well as flower beds and flower beds, are very popular. On the network you can find many different workshops for crafts from tires for the garden with your own hands. Consider a few simple design options.

The most primitive option is a round flower bed made from a car tire. It is difficult to call such a creation a masterpiece, however, with proper design, it can also serve as a decoration for the garden. A little more complicated, but much more spectacular - a flower bed of several tires, located one on top of the other.

To give interesting effects, you can use tires of different diameters, placing the larger one on the bottom and gradually reducing the size. Hanging flower beds from tires also look great. If you leave the disk inside and properly fix it, then earth can be poured inside. The main thing is to take care of a reliable fastening, since the total weight of such a structure will not turn out to be too small.

Crafts from polyurethane foam for the garden and vegetable garden with your own hands: photo examples and tips

Another unusual material that has also found its use in decorating a garden exterior is polyurethane foam. Due to a number of characteristics, such as light weight, ease of processing, insensitivity to rain and temperature changes, this material is extremely suitable for garden crafts. This solution will be an excellent alternative to do-it-yourself gypsum crafts for the garden.

The first thing you should pay attention to is the manufacturer's recommendations indicated on the cylinder with the purchased mixture. By itself in the cylinder has a liquid consistency and hardens due to contact with air. As a rule, it takes 10-12 hours for it to dry completely.

Helpful advice! Do not forget about personal safety measures in the process of working with polyurethane foam. How exactly to protect yourself - you will also be prompted by the information provided by the manufacturer on the cylinder.

Here are some simple tips for working with this material:

• polyurethane foam does not like cold, so it is better to work with it at positive air temperature;
• before starting work, the cylinder must be thoroughly shaken;
• in the process of squeezing the foam, hold the can with the cap down. So, the gas from the cylinder will not come out, and you can use all the foam that is in it;
• observe the recommended (usually 10-15 minutes) interval between coats. Otherwise, the uncured foam may fall off under the weight of the following layers;
• to make it more convenient to work with foam, you can use a special mounting gun.

DIY Foam Garden Craft Ideas

Looking through a photo of a garden with your own hands, for the design of which figures from polyurethane foam are used, you can see that the possibilities of this material are practically unlimited, and with its help you can create a wide variety of sculptures. However, in order for the figure to turn out to be strong, it is necessary to provide it with a strong and reliable frame. For this purpose, you can use plastic or tin bottles, as well as wood, wire or fittings.

For example, to make a snail, it is enough to follow a simple algorithm:

• on a pre-prepared surface (you can do this on a regular table covered with oilcloth), apply the first layer of foam, which will become the base;
• after drying, apply a second layer of foam and insert a plastic bottle into it, which will act as the snail's neck;
• cover the plastic bottle with foam and give it the desired shape with your hands;
• the head and horns of the snail are also shaped by hand;
• to make a shell, apply foam to the body of the snail, giving it an appropriate rounded shape. At this stage, you can insert a small bucket or pot into the shell, designed for planting flowers;
• using the same foam, make characteristic curls on the snail shell. Use paint and foam to decorate the resulting craft.

A foam frog can be made as follows:

• use an old pot and jar as a base. Fill them with foam and let dry. The pan will play the role of the body, and the jar will become the head of the frog. In order for the structure to be solid, it is recommended to fasten the parts with a wire;
• in order for the frog to have legs, use a sufficiently strong wire, also covered with mounting foam;
• give a characteristic shape to the foam that has not yet hardened with your hands;
• use the paint to give the frog the color you want and give it the eyes.

To give stability to the resulting figures, sand can be poured inside the containers used. Then it will turn out to be more stable and will not succumb to strong gusts of wind. All inaccuracies and extra pieces of foam can be easily removed with a clerical knife, giving the sculpture the most accurate shape. And in order for the foam figure to serve you longer, you can additionally apply a layer of putty on it, which will perform a protective function.

Helpful advice!In the process of decorating garden sculptures, you can use LED lighting. So, in the evening, the figurine will glow, and create a unique festive atmosphere in the garden.

Decorating your own garden is easy, and there are many ideas you can use for this purpose. After all, not only flowers and trees can help you properly arrange the territory. DIY crafts will be an excellent alternative to purchased models, giving your site a unique look and adding a unique zest to its appearance.

Do not throw away unnecessary things if there is a cottage. It is possible that there they will be a good addition to the decor. After all, how nice it is to get out into nature on a summer day off, admire flowers, fish in a pond, breathe fresh air, lying in the shade of trees. But in order to be able to enjoy all this, it is necessary to work fruitfully.

You can decorate the yard of the cottage with completely different elements created from improvised materials with your own hands. To fulfill the planned garden decor idea, various items that would not have occurred to you to keep: bottles, cans, tires, as well as old unnecessary furniture will do. From all this you can build various flower beds, flower beds, bird feeders, figurines of animals and more. The result of creation will depend entirely on the imagination and preferences of the owner of the site. And most importantly, you don’t need special education or great talent for this.

To create original flower beds, you can use anything.

For example, under a flower bed, you can use old unnecessary shoes. It is desirable that they be rubber. Such flower beds can be painted in any color. You can decorate with them the veranda, the edge of a large flower bed, the steps and the threshold of the house. Flowers planted in an old cart, or some kind of cart, will look quite original. Such a flower bed can also be painted at will.

If the paths in the country house were decorated with natural stone, then by all means a little of it should have remained. It is foolish not to use the remains of a stone to decorate a flower bed. There are plenty of design options. If you don’t bother too much, then you can simply lay out the outline of a flower garden from this stone in two rows. But when you want originality and comfort, then you should already strain yourself. After all, you can make a glass, a vase, a basket from natural stone, as well as decorate it with different colors. Such a decision will certainly please the eye, and will be a chic addition to any color.

If the owner of the dacha has a car, then he will certainly have old tires lying around somewhere. Here and from them you can make quite beautiful and original flowerpots, flower beds. You just have to cut them out at your discretion, and then paint them with a can of paint in any color you like. Figurines of various animals made from the same car tire can become a wonderful decoration for a flower garden. The tire is perhaps the most versatile thing in the country, from which you can make a lot of decorations for decorating the landscape.

Crafts from plastic bottles

Plastic bottles are also widely used in the country in the form of various decorative ornaments. For example, eggplants can be used to make interesting flower beds in the form of piglets. It is interesting in that it can wander from one corner of the cottage to another. You can plant in such a flower bed both flowers and seedlings, or a lawn.
By connecting fantasy, you can build many different animal figures from plastic bottles, such as a donkey, a family of pigs, swans, ponies and others. An interesting idea could be flowers cut and bottled and dressed on a wire frame. In order for plastic products to please the eye with their beauty for as long as possible, it is advisable to cover them with acrylic paint.
You can also make vases for fresh flowers from plastic bottles, protect the edges of the flower bed. Therefore, you should not throw them away, besides, plastic bottles decompose for a very long time, which leads to environmental pollution.

You just need to make several bird feeders on its territory. It's so nice on a summer day to lie in the shade of trees and listen to the singing of beautiful birds.
The feeder can be made from hemp. It is enough to hollow out its middle and make a roof from planks. Also, wooden twigs will come to help in building a house or a birdhouse. From them you can make a feeder of any model that you can think of. If you don’t particularly strain, then you can quickly make it from a plastic bottle, which can always be found in any country house. To do this, you need to make a couple of holes in the container, insert wooden sticks and pour food. And the feeder is ready to fill the tummies of the birds.

This type of decorating your dacha is suitable for people who love hand-made. If you have imagination and skillful hands, then it is quite possible to build figurines for the garden without spending money on them in the store. To create them, you will need all the tools at hand, any building materials, mounting foam, gypsum.


For example, it is very easy to build a cat from hemp. On the cut, draw a cute face of the animal, glue the cut out sharp ears and you're done. If no original idea of ​​​​a figurine comes to mind yourself, you can use the Internet. There are a huge number of different options for garden figures.

Such figures are quite difficult to sculpt, for this you need to gain experience or invite a professional. But if you still have a desire to try yourself in such creativity, then start with crafts, such as turtles, bugs, hedgehogs and ladybugs. Such a figure is easier to make, since it is based on a semicircle. And it can be very simply formed by typing a solution in half the ball, then you need to turn it over on a flat surface and hold it until it dries completely. After that, you can paint and decorate the sculpture.

fence decoration

To decorate the fence of the cottage, you can use various unnecessary things. For example, an old non-working bicycle attached to the fence can be an interesting solution. You can also nail pots to the fence boards in which climbing flowers are planted. In winter, you can decorate this building with garlands and pine needles.












In order to make your summer cottage comfortable and original, you should have some free time, skillful hands and imagination. After all, with such a set, you can turn ordinary improvised things into works of art.

Today, a dacha is not just a garden with a house. Nowadays, the dacha becomes a place of summer recreation. And any vacation implies a beautiful and cozy environment, so that everything around us pleases our eyes.

Therefore, in recent years, the fashion for the creative design of your summer cottage has been gaining more and more strength. Moreover, decorating flower beds is not the only possible direction for ennobling your dacha. There are a huge number of photos with ideas for giving. But the M.Art company offers only modern types of landscaping using the latest technologies.

It is possible and necessary to decorate the territory of the dacha with improvised means: old things, unused furniture, parts from cars, and the like.

Thus, you will not only get rid of trash and decorate the cottage, but also enjoy and satisfaction from the work done.

We will tell you in detail below about the best ideas for giving your own hands.

craft ideas

In the decor of the site from improvised means, your main assistant should be your imagination. For example, plastic bottles can become both an original flower bed and guiding paths.

In addition, it is easy to create animals and birds from bottles and decorate your territory with them. Ordinary stones are also a good material for decoration. They are often used to frame their own pond.

Car tires have long been the best flower beds, but now they have learned to make swans and other animals from them.

Ideas for children's play areas

Dacha is a family place, and if so, then it is necessary to provide rest not only for adults, but also for children. And best of all, children will have their own play area.

If you have large trees growing on your site, they are well suited for creating a swing. Creating sandboxes, treehouses and slides: here is an incomplete list of interesting ideas for giving in a children's play area.

original fence

If a person is first evaluated by clothes, then dachas are judged by a fence. And the more unusual the idea of ​​\u200b\u200bdecorating the fence, the more impressive the guests will be.

You don't need anything supernatural to give your fence its own face: just paint and imagination.

By cutting out stencils of pictures, and then transferring them to the fence, you can achieve impressive results. Any picture made to scale can become a stencil, it's just up to your taste and patience in coloring.

Flowerbed - the best decoration for a summer residence

One of the oldest, but never out of fashion, country decor solutions are flower beds. The original flower bed contains not only an unusual containing vessel (be it a tire, a cart wheel, a jug or a home-made container of a non-standard shape), but also the flowers that grow on it.

Therefore, it is necessary that the coloring of the flower bed is one composition with the planted flowers.

In addition, the flowers themselves show how they are looked after, and serve as an indicator of the diligence of the summer resident and his love for his garden.

Scarecrows are an original idea for giving. They are used by very few summer residents due to the stereotype of their use as a scarecrow. However, if you use the original decor in creating a scarecrow and not limit yourself to the standard scarecrow figure, you get a very unusual and eye-catching country decoration.

Note!

Decoration of the place of rest

In the summer, coming to the dacha, you want not to hump in the garden, but to relax in the fresh air. Therefore, the more comfortable and beautiful you arrange a place for rest on the site, the more pleasant it will be there.

You can place a lot of things in the recreation area, for example, your own pond. It is not difficult to make it, it is enough to dig a hole in size, cover it with a material that does not allow water to pass through (polyethylene will do), and decorate it beautifully with stones on the sides, then fill it with water - the pond is ready!

Also, now they often arrange a barbecue area, gazebos in summer cottages, you can hang a hammock from a tree. Garden tiles for transitions greatly change the impression of ordinary walks around the site.

Some people prefer outdoor activities. For them, the installation of sports equipment in the country will be very to their liking - you can put a horizontal bar, bars and rings - we get a mini-gym in the fresh air.

How to decorate your site is up to you. With great imagination and due perseverance, the summer cottage is quite capable of even becoming John Tolkien's "hobby hole"! Or another fabulous corner, good luck!

Photo ideas for a summer cottage with your own hands

Note!

Arrangement of a summer residence and a garden, own farmstead — not stopping process. All the time something is being altered, changed, decorated. This article contains crafts for the garden and cottages that will make your possessions unique. That is what makes the things made by their urks good, that they are unique and unrepeatable.

Vertical flower garden

Decorating a fence, a wall of a country or garden house, a utility block is not an easy task. One of the options from the “cheap and cheerful” category is to make a vertical flower garden. Bags or small containers filled with soil are hung on any vertical or inclined surface. Similar crafts for the garden and cottages are good because you can attach any rubbish - bottles, boxes, pipe trimmings. From all this you can make original planters.

Most often, ampelous flowering or green plants are planted on such flowering walls. Unpretentious ordinary petunias and pelargoniums are best suited. They also plant surfinia (very similar to petunia) and nasturtium. They bloom for a long time and do not require special care. Suitable for any herbaceous plants with long hanging lashes.

So what else can you make the basis for a vertical flower garden? Yes, from anything. Everything that can be poured into with at least a little earth. See for yourself.

Flower pots

Plastic or clay pots remained - it doesn't matter. Even if they are old and unsightly, they can be painted with some fun paint. And if they are also of different sizes, you get a very original panel.

Hanging a pot on a stretched chain-link mesh is a matter of a couple of minutes. All you need is a piece of wire.

Plastic vessels can be nailed through, although this is not a good idea. For clay or ceramic ones, you will have to make a “holder” from wire - a circle that can be attached to a wall / fence, or can be hung on ropes from a crossbar. In general, only here there are a lot of options. Such crafts for the garden and cottage do not take much time, and the result is pleasing to the eye.

Cans

Tin cans of different formats and sizes are not a problem to find. Small and medium ones can be used in the form of cylinders, and large or long ones can be cut in half lengthwise or remove a third of the radius from one side. It's the way you like it best.

Paint jars in fun colors - very good at it

Mounting methods are the same as for pots: smaller ones can be fixed on stands, larger ones can be hung. Use junk material - tin cans - and make attractive and useful crafts for the garden and summer cottages out of them ... Is this not the height of pleasure.

Plastic bottles

How without them? We twist the lid, cut off about a third from the long side. The mounting method is described above. There is another option with minimal damage to the wall. Knock down a lattice of wooden planks. Fix this grate on the wall, and attach bottles to it with self-tapping screws or carnations.

A wall of flowers - hang on the frame and wait until there is more greenery. Attach to the slats (left) or one to one (right). Take a closer look at the second option - there is a built-in irrigation system - a thin tube with holes for water outlet is missed from top to bottom

If the bottles are from milk or kefir - there are no problems, the plastic is opaque, the root system will be comfortable in it. To drain excess moisture, it will be necessary to make several holes in the lower part. They can be made with a nail heated on fire. Fast and hassle free. If the bottles are transparent, it is desirable to paint them. The roots do not like the abundance of light. You can use ordinary paint (preferably acrylic, it even falls on bottles easily), but it’s faster to work with spray cans. It's better to paint outside. Inside, the paint will quickly decompose.

From fabric

From burlap, any more or less dense fabric, a bag with pockets under the ground is sewn. You can use an old organizer (for shoes, toys, etc.). With these candidates for vertical flower beds, in general, everything is simple: we fasten with nails / screws through the bar (otherwise the fabric will tear). After we fill the pockets with soil and plant flowers.

You can sew or use linen bags. Hang them on hooks. You can plant plants in them from above and / or make holes in the sidewall. If sewing is not your forte, enterprising Chinese sew such bags under hanging flower beds. Such crafts for the garden and cottage require more effort - bags / bags are usually sewn. But the flowering wall looks unforgettable.

Cutting sewer or drainpipes

We take plastic pipes. We cut them in half lengthwise and get two long containers for planting. If there are no own leftovers, you can buy trimmings on the market, from construction teams. You need small pieces, so this beauty will not cost much.

Plastic pipes can be used as a bed for pots - drill holes in them for a pot.

You just need to figure out how to close the edges. The easiest way is the bottoms of a plastic bottle. Find the right size, cut so that 2-3 cm of the walls remain, put on the edges and fasten. Can be attached with small screws. They cut through plastic well.

small wooden boxes

Wooden boxes can be hung in two ways. The first is to fix one of the sides like a regular box. The second is to hang not like a box, but like a frame - sideways. The second option gives more options: you can pour earth directly into the boxes, or you can use them as coasters for any other containers with flowers.

A panel of boards and boxes with flowers - stylish Crafts for a summer residence and a garden - such hanging boxes will decorate both the wall of the house and the barn

If your wall is beautiful and you don’t want to get it dirty, you can assemble something like a panel from the boards, on which you can already fix the boxes. This option is no longer a good idea. It is also suitable for a solid yard. Wood and greenery looks very attractive. And so that the boards do not darken, treat them with wood oil with a dye. Such a coating needs to be updated infrequently, and the old impregnation does not need to be removed.

Ideas for flower beds from old things (photo)

As it turned out, a flower bed can be made from everything. Even old pants, a bicycle, a boat, an old chandelier, a chest of drawers, a chair, a kitchen table are used ... And this is not an ordinary standard flower bed, but an art object that few will forget. There are some very interesting ideas. These crafts for the garden and cottages will definitely be remembered by everyone.

From cargo pallets, you can create a wall that will cover the south wall from the hot sun and plant plants on it. Even old chandeliers sometimes bloom ... Using an old cart for planting is not too new, but it always looks fresh Decorate the fence by pinning an old bicycle to it ... and plant flowers "In the bike" Ancient piano stale in the bushes? From it you can make not only a flower garden, but also a waterfall ... Do you have an old boat? Make a bed out of it... The problem of recycling old shoes is always acute - and there is no one to give it to and it's a pity to throw it away... Even an old suitcase can become an interesting flower bed

Tellingly, such crafts for the garden and cottages also help to get rid of trash. Maybe it's worth considering everything available for use in this vein?

Column-flower bed

Flowering columns look very beautiful. Petunia and pelargonium are usually planted in them. These two types of flowers bloom profusely almost throughout the entire vegetative period. Against the backdrop of lush greenery, an abundance of flowers of different shades catches the eye. At first glance, you will not guess how such a column was created. In fact, everything is simple.

Need a metal wire mesh 2-3 mm in diameter. A column is formed from it - the mesh is twisted into a cylinder, fixed. A bag is inserted inside (you can use a thick plastic one, but linen is better), into which the earth is poured.

For more uniform soil moisture, a piece of drainage pipe is inserted into the high columns in the middle. It differs in that its surface is perforated and water will pass through it perfectly. So, a pipe segment is inserted in the center, covered with soil from all sides. In this design, watering the flowering column is not a problem. It is necessary for a couple of minutes to throw the hose inside, into this pipe, and the water will distribute itself through the holes.

You can make it easier - take a plastic pipe of large diameter, cut holes in it ...

Plants are planted from above and into holes cut on the sides. The distances between plants are not too large - so that the column takes the required form faster.

garden figurines

What besides flowers decorates our yard, garden? Yep, different figures. In this section, we will consider new crafts for the garden and cottages in this area.

From plastic bottles

Decorative figurines for the garden and cottages are made from a variety of materials, but most of all crafts are made from plastic bottles. There are a lot of them, and in different formats and very plastic material, this thin plastic. In addition, it can be painted, which further expands the possibilities.

Elephant from a plastic bottle…needs an old hose from a vacuum cleaner for a trunk Plastic bottle people are for those who have artistic skills Piglets and hares are an eternal theme for the garden Not so difficult…PET bottle snake is something new More a variant of penguins and wasps ... If fresh flowers have not yet bloomed ...

In addition to plastic bottles, garden figurines can be made from wood, old pots, flower pots, bowls, buckets, cones, painted stones. In general, from what ordinary people throw into a landfill. But in vain. From all this, very interesting crafts for the garden and cottages are obtained.

Gypsum and cement mortar figurines

On sale there is plaster for sculptures. It is ideal for making garden figurines. But it is expensive, but it hardens quickly and has a smooth surface. Instead of special gypsum, you can use building or even a mixture of cement and sand. The cement figurines will be dark gray, so you will have to use dark or saturated colors. Under light paints it will be necessary to apply several layers of light soil. But cement is more durable.

Working with plaster and cement

It is necessary to dilute gypsum in the proportions indicated on the package. Just keep in mind, it seizes very quickly. Immediately after mixing, it must be poured into molds, so first prepare all the molds, then just dilute the gypsum mixture. After about 40 minutes, the gypsum will harden enough that it can be removed from the mold. So making garden figurines from gypsum is a quick process.

To lighten the figurine and to save gypsum, you can insert some kind of vessel inside ...

With cement, it's different. For 1 part of cement grade M400 or M500, you need to take 4-5 parts of fine dry sifted sand. In a dry state, mix the mixture until the sand turns evenly gray (there is white cement and even pink). Only then can water be added. It is taken 0.5-0.8 parts. There are no exact proportions of water, since sand can be of different humidity, and the composition itself can be of varying degrees of fluidity. After filling the form, you will have to wait a few days. At least 3-4 (at a temperature of about +20°C), and preferably 5-7 days. So to make garden figurines out of cement, be patient.

Registration

In a frozen form, the figures can be painted with acrylic paints. You have to apply two coats of paint, and then cover with yacht varnish. In this form, garden figurines retain the brightness of colors for several years.

To work with gypsum, you need to know one secret. In order for the figure to easily get out of the handicap, the inner walls are lubricated with a mixture of soap, water and vegetable oil before pouring. Soap is rubbed on a grater, poured with water. When the chips soften, mix until smooth and add a little vegetable oil. Lubricate the mold from the inside with this mixture before pouring the diluted gypsum into it.

Plastic bottles are often used as molds. You can not stand on ceremony with them - cut with a knife or scissors. If a metal container is used, the walls must be lubricated thoroughly. If the surface does not have to be flat, it is easier to cover the container with cling film or a plastic bag. In this form, the workpiece is removed without any problems at all. While the gypsum is not yet completely dry, you can use something sharp (a needle, an awl, etc.) to form the desired relief on its surface.

If the surface should be smooth, but in fact it has flaws, we take sandpaper and get rid of irregularities. The process is long and dusty, so please be patient.

Foam figurines

Crafts for the garden and cottages from polyurethane foam appeared not so long ago. Low expansion foam is used. She barks a denser surface without big bubbles. Work with foam with gloves, as it adheres well to any materials. With skin too.

Iguana on a stone hill...

How and from what to make the base

To create a conceived figure, find the base that most closely resembles the object. It can be a plastic bottle, a piece of wood, even a coil of wire or a wad of paper. Sticks or thick wire are suitable for handles / paws / if you need to give a curved shape. For tails, a more suitable hose. to give it a stable shape, a sufficiently rigid wire is threaded inside.

Small details - ears, horns, etc. - can be cut out of cardboard, plastic, foam rubber. They can simply be inserted into the non-hardened foam, and then, after its polymerization, foamed. Before starting work with foam, all the details of the frame must be connected together. The aesthetics of the connection is absolutely unimportant - everything will be covered with foam. Strength is important so that some parts do not fall off.

Features of assembly and work with foam

If the base is a plastic bottle, pour sand into it so that the figure is not blown away by the wind. For the rest, you will have to come up with some kind of weighting coasters.

The gradual application of foam is the main thing to remember

Foam is applied to the assembled frame. Vertical or horizontal stripes, one not far from the other, but leaving room for expansion. The foam is laid in layers. The second layer is applied after the first has polymerized. The initial polymerization time is indicated on the packaging. Apply the first layer, correct, wait 20-50 minutes until the foam hardens, apply the second layer. And so on until you get the desired shape.

The meerkat is almost ready ... it remains to color

During operation, the shape of the foam can be adjusted. To do this, you can use a piece of plastic soaked in water, a plastic or silicone brush, whatever is convenient for you. For some figurines, a smooth surface is important. If smoothing does not help, the flaws can be cut off with a sharp clerical knife. The "wool" of hairy animals is also made from foam - it is applied in short strokes. In general, the creative process ...

How to paint

It is most convenient to paint garden figures from polyurethane foam with oil paint. It is necessary to cover in two layers. After it dries, it is desirable to cover in two layers with yacht varnish.

Cover the ball with foam, attach characteristic details - the bun is almost ready Eyes - small rubber balls covered with paint After painting, this is what we get

Just look, it gives all the colors a yellowish tint. If this does not suit you, look for another composition for external use, but colorless.

Functional crafts for summer cottage and garden - pallet garden furniture

Buying furniture for summer cottages in stores is not the best option. You won’t take an expensive one, a cheap one is made of fiberboard, which swells from moisture in an unheated room and the furniture becomes unusable. So it turns out that the best way out is to do it yourself. There are many ideas that allow you to get a very comfortable environment with minimal time and money.

A working table and a pallet swing are such crafts for a garden and a summer house from the category of “cheap and cheerful”

There are many strange things in our country. One of them is the use of wood for the manufacture of cargo pallets. You can buy used pallets quite inexpensively - they are written off after a certain period of time. It is from these pallets that you can make a table, a sofa, an armchair and many more different useful furniture. For sofas/armchairs, you will need to sew additional pillows or foam rubber mats, but this is not a problem for most. It is doubly pleasant to make such crafts for a garden and a summer residence - every time you get a charge of positive emotions when you see them, and even when you use them ...

Pallet handling

The wood used is not of the best quality, but it is many times better than fiberboard. Especially for a summer residence. So, we take a pallet, we grind wood. You can, of course, manually using sandpaper with different grains, but things will go faster if you use tools. Red emery wheels are suitable for a grinder, but processing will be better when used.

After grinding, we proceed to the initial stage of assembly, and then, before the final assembly, it will be possible to paint. Why not paint right away? Because during the manufacture of ideas come, for the implementation of which it is necessary to remove or add one or two or more planks. If the pallets are already painted, light/dark spots remain, which are then difficult to make the same color. In general, it is better to first try on what will be and how it will be, and paint everything before assembly.

You can paint with any wood paint, but do not forget about wood oils. They do not create a film of coloring matter on the surface, but penetrate inside, while protecting the wood and toning it. When using oils, the texture of the wood is not painted over, but appears brighter. The advantage is that the coating must be renewed without cleaning off the old one, but only by covering / impregnating the top layer. All in all, a good option if you want to keep the grain of the wood.

Connection methods

Pallets are connected to each other with nails or wood screws. In particularly loaded places, you can use metal mounting plates - so that they do not move 100% relative to each other.

The inclination of the back in the manufacture of armchairs / sofas can be set using metal strips or corners welded at the desired angle. Maybe this is not very aesthetically pleasing, but it is reliable and fits perfectly into the overall style of "pallet" furniture. In general, everything is really easy, even if you have not done anything like this before.

Other Ideas Worth Considering

The theme of home-made country furniture is inexhaustible. Craftsmen from waste material do very interesting things. For example, a table made of a bunch of birch logs. A glass table top may be too much for a summer residence, but it’s very beautiful.

Developing this idea, you can use an interesting trunk, a few snags, etc. as a “leg”. Just do not forget to pre-soak the wood, and especially the bark, in antiseptic additives (which do not contain chlorine and dyes). Otherwise, the bugs living in it can quickly turn wooden walls into dust.

Another noteworthy table for washing the harvest. All summer residents are aware of how much effort goes into "washing root crops from the ground." An elegant solution to the problem is a special table, where a stainless steel mesh is fixed instead of a table top.

The smaller the cell, the smaller root crops can be washed. And in order not to carry dirt on the site, the area under the table can be concreted and runoff towards the beds, for example.

This is no longer a dull path or playground ... Painted stones are an interesting decoration

And not exactly furniture (more precisely, not furniture at all), but also interesting ideas that you can’t pass by - a tool shed from old doors, painted concrete tiles / asphalt, a chandelier from glass bottles, a broom from plastic bottles ...