How to repair a hole in a leather jacket. Restoration of a leather jacket. How to seal a leatherette jacket

Leather products are practical and very beautiful. But, like with any other thing, trouble can happen to them. The leather, despite its density, tears quite easily. How to seal a leather jacket with your own hands, without the help of a specialist?

How to seal a leather jacket with your own hands?

How to seal a leather jacket: prepare everything you need

Before you get started, you need to make sure that you have everything you need on your desktop. For repair you will need:

Special glue for leather and fabric or a product for gluing shoes;

A piece of unnecessary leather 2 cm larger than the hole or cut (the color of the patch should be as close as possible to the color of the item being repaired);

Degreaser (solvent will do);

Coating brush;

Toothpick;

Paper or regular tape;

Paint for coloring leather.

You also need to take care in advance about the cargo, which will have to be fixed to the glued place during the day. topical video: sealing a leather jacket after object lesson will be simpler.

How to seal a leather jacket with your own hands

There are two types of tears on the leather surface: in the form of a corner (the material remains in place) or a hole (in this case, a piece of material is completely separated from the product). Depending on the characteristics of the damage, two methods of connecting the gap are used.

How to seal a leather jacket if the leather is torn out with a corner? The sequence of actions is as follows:

Open the lining of the fabric to gain access to the damage on the underside of the skin. Usually the manufacturer leaves a seam stitched outward on the lining of one of the sleeves.
Treat the inside of the skin with solvent, then coat the area around the tear with glue. Leave the break line clean.
Apply glue to the entire patch with a brush.
Wait until the first layer of glue dries (according to the instructions), apply the second layer.
Glue the patch from the reverse side to the tear site, iron it with your fingers or a piece of fabric.
Turn the jacket right side out, fold the leather along the tear line so that the edges of the cut separate, and use a toothpick to apply a drop of glue into the joint. Distribute the compound evenly, connect the joint and press the edges of the gap tightly.

All that remains is to press down the place where the leather is glued with a weight, wait for the glue to dry and sew up the lining. To achieve perfect result, you can apply leather paint to the joint.

Skin is universal material which allows you to create various products, starting from shoes, things and outerwear to interesting decor. However, although it is quite wear-resistant, it requires constant care and, in case of damage, restoration.

How to restore a leather jacket at home

Absolutely any material tends to wear out. Even high-quality leather can become damaged over time. This depends on the care of the product and the duration of wear. A leather jacket is especially susceptible to damage because it is an element of outerwear. Most often, the collar and cuffs with pockets are subject to restoration - since these are the parts of the leather jacket that are subject to the most friction.

You can repair a leather product by contacting a professional workshop, but their services are usually quite expensive. Don’t worry – you can deal with minimal damage yourself.

Fortunately, in modern world there are many various materials and ways to apply them at home and help increase the life of a leather product.

Types of damage

Deciding how to restore a leather jacket can only be determined by determining exactly how the damage was sustained.

The main types of damage that can be repaired at home:

Breaks. An accidental snag on a nail or any other sharp object can ruin appearance things.
Scratches. Contact with third-party things, accidental scratches in public transport - all this makes the appearance of a leather jacket unsightly.
Scuffs. Most often they form from constant friction with a bag or backpack, as well as in places that most often come into contact with other surfaces: for example, sleeves.
Color fading. Externally, the jacket may not have any visible damage, but over time it may lose its original color in places exposed to light and external factors.

Therefore, in order for the jacket to serve for a long time, you should pay attention to its care and clean the leather on time, and also use special means to maintain her condition.

Jacket repair

You can repair a leather jacket yourself if you are not afraid of damaging the product even more. It is best to have time to work and a comfortable workplace. It is very important to consider the availability of materials that are needed for restoration and to acquire them in advance.

Basic materials that may be needed and depend on the type of damage:

Leather glue.
Degreasing agent.
Brush.
Threads that match the color.
Needle.
Leather paint.
Materials for the patch.

Materials should be used depending on the situation, but it is better to prepare them in advance. It is very important to act carefully and do the work efficiently - this way there is a chance that the restoration will be successful and the jacket will last for a long period of time.

Repairing rips and cuts

Damage such as ruptures is perhaps one of the most unpleasant moments that can upset any owner of a leather jacket. Most often it happens that the skin is torn either completely or at a corner.

To get rid of the gap It is best to turn the product inside out, rip open the lining and find the cut. This area must be wiped with a special solution in order to degrease the skin.

Next, you should choose a piece of leather of the same color as the jacket material. Apply glue to the area around the tear and the cut patch. Place the tear on the leather jacket as close as possible and apply glue again. Then glue the patch to the tear site.

Important! The patch should be of such a size that it is a couple of centimeters larger than the tear in the jacket.

After carrying out such a restoration procedure, you need to put the glued area under a press for at least a day. Then all that remains is to sew up the lining and wipe the tear area with outside products to get rid of traces of glue.

How to repair a hole in a leather jacket

Sometimes it happens that any damage may not be noticed immediately. One of the most unpleasant are holes, which can greatly damage the product, as they tend to spread over larger areas.

The main thing is that if damage is detected, immediately seal it with a plaster to avoid permanent damage to the appearance of the jacket.

Ways to fix a hole:

In cases of large-scale tears in the leather in the jacket, it is better not to make independent attempts to restore the jacket, but to turn to professionals.

Elimination of abrasions, repair of collar

Scuffs are not a huge problem for leather jacket owners if you know how to deal with them. Get rid of these problem areas on the product you can use cream, glycerin, paint or other auxiliary means:

You can refresh your collar using baking soda. To do this, apply a small amount of it to a soft sponge and lightly rub the greasy area. Glycerin or paint can be used in the same way.

Important! It should be remembered that correct selection paint colors are the key to success for the restoration of a product.

How to restore/refresh a jacket at home

Sometimes, of course, the question arises of simply updating the color of a leather jacket, and to do this, you first need to choose a product that is suitable for leather items.

The easiest way to refresh a product is with aerosol paint, which is sold in special stores.

Before starting work, you need to clean the jacket from dust and dirt and only then start working. A leather jacket should be hung on wide, comfortable hangers so that the material does not form wrinkles and it can be applied evenly. The paint should be sprayed at a distance of approximately 20 centimeters from the product

at a fairly fast pace. After complete dyeing, the jacket should be left in this position until completely dry paints.

If after this you find places where the paint has taken on worse, you can process the product again.

Prevention, care of a leather jacket

In order to maintain a leather jacket in good condition, you should use special care products that not only clean the leather, but also help restore the material, add shine to the material and carry out minimal disinfection.

Among such funds are: Water repellent spray.
It can help preserve the original appearance of the product. Wax.
Its use helps make the material soft, which is an excellent prevention of cracking, especially in the cold season. Cleaning sponge. Special material
does not damage the skin and cleans the product as delicately as possible. Foam cleaner.

Gives extra shine and helps get rid of dirt.

These products are quite simple to use, but can easily extend the life of a leather product.

Leather jackets are an integral part of any person's wardrobe. They are very practical and durable. But still, sometimes something absurd happens - you get caught on a nail or awkwardly put your hand in your pocket, and the question arises - how to seal a leather jacket at home? Of course, numerous studios offer various clothing repair services. But if this option seems too costly to you, then we suggest dealing with the problem on your own, especially since it is not very difficult.

What do you need to repair a leather jacket?

Prepare necessary materials and tools:

Glue for working with leather and fabric. Use “Moment” or any shoe glue. Read about which composition is better and will suit you at a price in our special article.

Important! Do not use PVA or super glue.

A piece of thin leather or suede. Choose a material that is the same color as your favorite item. The size of the patch should be 2 centimeters larger than the torn area or cut on each side.

Important! If the hole or cut is small, use an old leather or suede glove to patch the patch.

Sharp small scissors.
Solvent for degreasing.
Hard brush.
A pair of toothpicks.

Important! You may need a heavy object to press down on the area to be glued as you work through the problem of how to seal a leather jacket. It is better to carry out all work in a well-lit and, preferably, ventilated place.

How does the leather on a jacket tear?

The most common types of damage are:

Corner break
A piece of skin was torn out.

Important! The way to close the gap in each of these situations will be different. Read them carefully so that the result of the problem is how to seal a leather jacket at home, was very high quality.

Step-by-step instructions for repairing a leather jacket - situation No. 1

If you tore the material with a corner, then follow the following procedure to repair your leather jacket.

Step 1

Turn your leather jacket inside out.
On the lining of one of the sleeves, find the seam stitched outwards and open it.
Place the jacket on a flat, well-lit surface (such as a kitchen table).
Sticking your hand inside, reach the place of the tear from the wrong side.

Step 2

Treat the torn area well with solvent to degrease.

Step 3

Prepare a piece of leather or fabric patch. The size of the patch should be more area gap of 1.5-2 cm on each side.

Step 4

Apply glue to the surface of the patch.
Use a brush or cotton swab with glue around the tear area.
Do not coat the gap itself.
Let the glue dry for 20-30 minutes (see instructions for using the glue).

Step 5

Apply another one thin layer glue.
Wait until it dries.

Step 6

Carefully glue one side of the tear.
Align the edges and glue the patch completely onto the cut.
Press down well on the junction of the torn area.

Important! The smoother the joint, the less noticeable the seam will be.

Step 7

Turn your jacket inside out.
Fold the leather along the tear line so that where the edges meet is separated.
Using the tip of a toothpick, carefully apply a little glue between the edges of the tear.
Move them closer.

Step 8

Lay the jacket flat on the table.
Press down the area to be glued with a weight for a day.

Step 9

If necessary, tint the bonding line with a cream paint of a suitable color.

Step 10

Sew up the lining.

Important! If the seam is still noticeable, but the jacket is already intact, you can additionally decorate this place and several other areas of the product, thereby giving original design things. Choose one that is more convenient and interesting to you from the point of view decorative design option from those proposed in our separate publication.

Step-by-step instructions for repairing a leather jacket - situation No. 2

If you have torn out a piece of leather, follow the instructions below to easily repair your leather jacket at home with your own hands.

Important! To work, you will need, in addition to the above tools, tape and tweezers.

Your actions:

Using tweezers, carefully insert the torn piece into the hole and seal it with tape.
Turn the jacket inside out and get to the tear from the wrong side, as in the previous case (steps 1, 2, 3).
Glue the prepared piece of fabric not to the joint, but to a piece of leather.
While the fabric is not glued, it can be moved, so carefully turn the jacket inside out and remove the tape. Use your fingers to straighten the patch, press it, and leave to dry.
Sew up the lining.

Important! If you did everything correctly, the break point will be completely invisible.

Important! If you were unable to carefully seal your jacket, find out , and not only leather.

Before using the tape, make sure it is sticky on a piece of leather that is not visible. Most things are currently painted using special films. In this situation, instead of sealing the leather jacket, you can remove the surface layer of dye.
Make sure that you remember the instructions well before work, because during work you must be concentrated on the goal and not be distracted.
The glue should not dry before you repair the break, as it will be difficult to apply a second layer of glue and the quality of the connection will deteriorate.
To sew the lining, use a needle designed for sewing leather. Otherwise, you may damage both the machine and your clothes.
If you are concerned that the patch will be visible, then use design solution- sew a couple more pieces of leather over the entire surface.
If glue gets outside the hole during work, carefully remove any traces of it with a dry cloth. Under no circumstances should the material itself be wetted.
Before work, first check that the glue and tape do not leave marks on the material, and that the paint perfectly matches the color of your product.

Important! In the future, take good care of the product so that you don’t have to unplannedly spend money on new items. Our advice will help you with this,

How to seal a leather jacket at home? A leather jacket is present in the wardrobe of almost every person. Despite the fact that leather is one of the most durable materials than better quality material, the thinner it is and the more easily it is susceptible to various damages.

1 Materials for repairing a leather jacket

You can tear any jacket: from a biker biker jacket to a thin leather jacket. Many workshops provide repair services for leather clothing, but by fixing the damage at home, you can save a decent amount.

Fabric tear on a leather jacket

There are 2 types of damage to a leather jacket:

A piece of skin was torn out.
Partial rupture of the product.

Depending on the type of damage, jacket repairs may vary in recovery time and amount of materials used.

This does not require special skills or hard-to-find materials; the main thing is to choose a well-lit and level surface. work surface and tune in to a certain sequence of actions.

Damage to a leather jacket

Before you start sealing the jacket, the product must be cleaned and dried thoroughly. Tools you need to have to repair a leather product:

Glue suitable for working with leather. You can use any shoe glue. But you need to take into account that PVA glue and superglue are not suitable: the first has a too watery base and when drying can form a noticeable white film, the second glues instantly, without allowing the fragment to be adjusted.
Scissors.
Toothpicks.
A piece of leather. The color of the patch should match the color of the jacket. The material can be taken either similar or similar in texture. If thin leather is damaged, you can use velvet or suede of a similar color (for example, a glove).
Solvent. In order for the surface of the skin to adhere to the material used, it is necessary to degrease the surface.
Paint suitable for working with leather products.

You may also need a heavy object to press down on the surface. In addition, the room should be well ventilated to avoid the toxic effects of the materials used and to achieve maximum air access for the best effect of the glue on the leather surface.

Depending on the type of material damage, there are 2 options for repairing the product.

2 Option 1 - breaking the material at an angle

Such damage is typical when the jacket ruptures on a sharp corner, including a nail or other similar object. In this case, the piece of material remains in place, and the main task is to fit the torn piece as closely as possible to the main product.

Treating a leather patch with glue

In order to veil fabric torn at an angle, you need to have access to the inside of the product. To do this you will have to rip the lining apart. This is usually done in the area of the factory seam on the wrong side along the sleeve.

Actions that need to be taken to seal a leather jacket torn at a corner:

Turn the jacket inside out. Find a seam that runs as close as possible to the damaged area. Rip it open and get as close to the damaged skin as possible.
In order for the patch to last longer, it is necessary to degrease the area using a solvent. You can not use it, then the durability of the patch will noticeably decrease.
Prepare a patch that exceeds the area of the damaged surface by approximately 1.5-2 cm on each side.
Apply glue to the surface around the perimeter of the patch and the tear. In this case, there is no need to coat the gap itself with glue. Let the adhesive soak in for 20-30 minutes.
Apply another layer of glue and let it dry a little.
Place the patch on the torn area, smooth the edges as evenly as possible, and press briefly with a heavy object.
Before the glue dries completely, the jacket must be turned inside out so that the edges of the patch separate a little. Using a prepared toothpick, apply a little glue to the edges of the patch and press down with a heavy weight for 20-24 hours.
After the time has passed, remove the weight from the jacket, straighten the patch, and, if necessary, cover it with leather paint of a suitable color.
Sew the lining with inside.

3 Option 2 - part of the skin is torn out

The difference with the previous method of repairing a product is that there is no part of the product that will need to be replaced similar material, or similar in texture. In particular, to mend a thin leather jacket, you can use a leather or velvet bag of a similar color. Ideally, it is better to save the torn piece of the product in order to get as close as possible to the original version.

Jacket repair: before and after

In addition to all the materials used for partial rupture of the jacket and its further repair, if a piece of material is missing, you will also need tweezers and tape:

Using tweezers, a piece of skin must be attached to the tear site and secured with tape.
Approach the damaged area from the side of the lining and spread it along the seam line.
Glue the prepared material to the torn piece of leather. WITH front side remove the tape and, while the glue is not completely dry, combine the pieces of leather so that the damage is minimally visible. The patch on the inside may differ in color, as it will not be visible from the outside of the product.
Sew up the lining.
If necessary, after complete drying, treat the product with cream paint of a suitable color.

A few tips to help make things better and more durable:

It is better to first test the tape that will be used to seal the torn piece of leather on the outside on a less noticeable area of the jacket. Many modern models After dyeing, clothes undergo minimal processing, and the paint does not last very well. Sometimes the jacket acquires a particular shade with the help of a thin film - in this case, the adhesive tape may come off along with a piece of paint when removed.
Do not use quick-drying glue. It takes some time to match the edges of the product and the patch. If the glue dries instantly, you will have to apply an additional layer, which will make the seam more noticeable and the work less accurate. This is why it is not recommended to use superglue.
To sew on a patch, it is better to use a needle designed for leather products. If you use a regular needle or sewing machine, you can waste extra effort and ruin the material and the machine itself.
If after drying it turns out that there is too much glue, the excess must be removed with a dry cloth. Under no circumstances should the product be wetted; the taped seams may come apart, which will lead to the need to apply an additional layer and make the finished product sloppy.
When using paint, you need to make sure that it matches the color of the finished product as closely as possible.
If, when the patch dries, it turns out that it extends beyond the edge of the damaged area, then you can use a design solution: sew several similar patches on different areas jackets, thus create unique design and divert attention away from the torn area.

Bonding damaged areas

In addition, before correcting a defect in a leather product, you need to tune in to the result and calculate the sequence of your actions several times. You need to be patient and not try to see the result of your work ahead of time. Otherwise, the glue will not dry completely and you will have to re-glue the jacket again.

5 Liquid skin when sealing a jacket

If the jacket is cut, then liquid skin- an ideal tool to hide a cut as much as possible. The tools you will need are a medical bandage and a small spatula for applying the solution, which can be made manually using a plastic card.

A piece of bandage is applied to the damaged area. It should be slightly larger in area than the cut surface. Apply 1 solution of liquid leather on top using a homemade spatula. After drying, apply 2 layers and dry for 3-4 hours. After complete drying, the repaired area should be almost invisible.

If all points are followed, sealing a leather jacket at home will not be difficult, and the quality of work will not be inferior to a professional tailoring and clothing repair studio.