30.05.2015 10161 Tests and reviews 0

Fujifilm's X-series line of cameras has expanded with the new X-T10, which is a more compact and affordable version of the mirrorless X-T1, but no less interesting. The X-T10 is similar in many ways to the X-T1, but if you put them side by side and look closely, you'll notice some differences.

The X-T10 is compact and made from durable magnesium alloy. Controls - stylish corrugated aluminum discs for adjusting shutter speed, exposure compensation and shooting mode selection; there are also seven functional customizable buttons. At the same time, the camera retained the sharp and angular edges of the X-T1. As for the differences between the X-T10 and X-T1 in terms of weight and size, the novelty is 8 mm thinner and 5 mm shorter than its predecessor, and also weighs 13% less (380 g compared to 490 g X-T1). It also features a less protruding front grip handle. Unfortunately, the X-T10 doesn't inherit the X-T1's water and dust resistance, as well as a wide range of accessories, including a vertical grip. However, this is not surprising, given the focus of the product.

One of the main features of the novelty is a fully automatic mode, which can be activated in one switch. It is intended for less literate photographers, who are the main target audience of this "mirrorless". The dedicated ISO switch from the X-T1 to the X-T10 has been replaced by a shooting mode switch. You can also find a new ejectable flash built into the viewfinder ridge, but the guide number is low at 7 meters at ISO 200. The flash is activated by a spring-loaded lever located on the left, its brightness is automatically adjusted, which saves battery life.

The novelty is equipped with a tilting 3-inch LCD display with a resolution of 920,000 dots on the rear panel. It supports Preview Pic Effect - a mode that shows natural images. Using the screen, it is equally convenient to shoot by holding the camera near the ground or overhead. The memory card is placed under the same cover as the battery. The tripod mount is inconvenient. It is too close to the battery door. Because of this, it is not possible to change the battery or memory card while the camera is on a tripod. Behind the door on the left are connectors for connecting a microphone, HDMI and USB.

The electronic viewfinder uses a 2.36 million-dot OLED-type panel, as is the case with the X-T1, which features Organic EL technology to enhance clarity and contrast. The brightness of the image in it is adjusted automatically. The built-in gyroscope measures the orientation of the picture in the viewfinder depending on the position of the camera; note that this is not possible in cameras with an optical viewfinder. It is worth noting that the outstanding x0.77 viewfinder (the largest among digital cameras) was one of the most important elements of the X-T1; The X-T10's viewfinder is also good, but falls a bit short of the X-T1's due to its smaller size and lower zoom ratio. The viewfinder itself has a proximity sensor, in order to be activated when a person starts using it.

The heart of the Fujifilm X-T10 is a 16.3MP X-Trans™ CMOS II sensor with built-in phase detection autofocus, which offers both single-point and 49-point focusing. According to the manufacturer, this solution improves the results of shooting moving objects. In addition, the camera allows you to shoot in bursts up to 8 frames per second. The matrix uses a color filter with an irregular structure. It minimizes color distortion and moire without the use of a low-pass optical filter, allowing you to increase the amount of light penetrating the matrix. So the image quality of the X-T10 should be on par with the more expensive X-T1.

The sensor is complemented by a powerful EXR II processor. Processor-level noise reduction ensures sharper images with deep blacks even at high ISO settings. The Fujifilm X-T10 has an ISO value of up to 51200. In addition, the model implements Light Modulation Optimization (LMO) to correct diffraction and other distortions, with a delay between shutter releases up to 0.05 s, and between frames - 0.5 s . The electronic shutter operates silently.

The 77-point AF system can be used in single-point mode or in wide-angle/servo mode with 3x3, 3x5, or 5x5 zones of the photographer's choice. The shutter speed range is from 1/4000 to 30 s. The Fujifilm X-T10 can shoot Full HD video at up to 60fps; in this case, film simulation modes are also supported, and you can adjust the exposure, aperture, shutter speed, sensitivity and adjust the focus (manually or automatically). The camera has a built-in Wi-Fi module that supports 802.11b/g/n standards, providing data transfer at speeds up to 36 Mbps and shooting control from a smartphone or tablet connected to the Fujifilm X-T10. Without recharging the battery, the X-T10 can take 350 shots, which is the same as the result of the X-T1.

Among the useful functions of the Fujifilm X-T10, we note Auto Macro - automatically switching the camera to macro mode while maintaining the speed of autofocus. Multiple exposure capabilities are supported, allowing two objects to be combined in one photo, for example, adding people to the picture, Focus Peaking (digital separation of the image for precise manual focusing and highlighting the focus center) and interval shooting. The "feature" of the model is effects that mimic the shades of traditional Fujifilm films, and artistic filters.

Conclusions:

What do we have in the dry residue? The X-T10 model did not inherit dust and moisture protection from the X-T1, at the same time, the novelty offers 90% of the capabilities of the flagship X-T1 for 60% of its cost. It is worth noting the most powerful tracking autofocus, similar to the development of Nikon's 3D tracking and Sony A6000 autofocus. The camera is aimed at entry-level and intermediate level users.

Specifications Fujifilm X-T10

Price	$700 (body only), $899.95 with 16-50mm lens, $1099 with 18-55 lens
Housing material	magnesium alloy
The matrix
Maximum Resolution
Aspect Ratio
Permission	16 megapixels
Matrix size	APS-C (23.6 x 15.6mm)
Sensor type
CPU
color space
Color array, filter	X-Trans II CMOS
Image
	Auto, 100-51000 (JPEG), 200-6400 (Raw)
White balance presets
Custom white balance
Image stabilization
Uncompressed format
File format	JPEG (Exif 2.3) RAW (RAF format)
Optics and Focus
autofocus	Contrast definitions (sensor) Phase detection Multi-zone Centre Single point selective Tracking Continuous Face detection Live view mode
AF illuminator
Manual focus
Number of focus points
Lens mount
Focal length multiplier
Screen and viewfinder
Hinge	Only tilt up and down
Screen size
Screen resolution
Touch screen
Viewfinder type	Electronic
Viewfinder coverage
Viewfinder resolution
photography features
Minimum shutter speed
Maximum shutter speed
Exposure modes	Program Shutter priority aperture priority Manual
Built-in flash
Flash range	5.00 m (ISO 100)
external flash	Yes (via hot shoe or wireless)
Flash modes	Auto, Forced flash, slow sync, flash off, rear-curtain sync
Flash sync speed
Continuous Shooting	8.0 fps
Self-timer	Yes (10s / 2s delay)
Exposure compensation	± 3 (per 1/3 step)
Exposure bracketing	(1/3 EV, 2/3 EV, 1 EV increments)
White balance bracketing	Yes (+/- 1 to +/- 3)
Video shooting features
Permission	1920 x 1080 (60p, 30p, 24p), 1280 x 720 (60p, 30p, 24p)
Format
Microphone
speaker
Data storage
Memory card type	SD/SDHC/SDXC (UHS-I)
Data transfer
	USB 2.0 (480 Mbps)
	Yes (HDMI Micro (Type D))
Microphone port
Headphone port
Wireless	built-in
Wireless Standards
Remote control	Yes (using smartphone, cable)
physical characteristics
Protection against moisture and dust
Battery life	350 shots
Weight with battery
Dimensions	118 x 83 x 41mm
Other features
Orientation sensor
Interval recording
	using a smartphone

FUJIFILM is one of the companies that has completely abandoned classic SLR cameras in favor of mirrorless digital cameras. The FUJIFILM FinePix X100 compact with a large (APS-C) matrix and a fixed focus fixed lens can be called the first test of the pen - a specific product for professionals. Next came the top system camera FUJIFILM X-Pro1, which was positioned as a competitive solution for the premium segment. To attract a wider range of users, the FUJIFILM X-E1 was created, and then even more affordable models (FUJIFILM X-M1 and X-A1) and their subsequent reincarnations were released. Last year, FUJIFILM's first dust- and water-resistant mirrorless camera, the FUJIFILM X-T1, was announced in the upper price range. But today we will talk about the system camera, which is designed to consolidate the position of the Japanese manufacturer in the mass segment.

The novelty largely repeats the older model: a similar appearance and ergonomics, a similar matrix and processor, fast hybrid autofocus, high functionality and a number of other interesting features. The main differences lie in several simplifications. We will talk about all this and much more in more detail below, but first we suggest that you familiarize yourself with the technical characteristics of the FUJIFILM X-T10:

Manufacturer and model		(16470881)
Type, class		Digital camera, mirrorless
light receiving element		APS-C type X-Trans CMOS II sensor (23.6 x 15.6 mm); effective number of pixels - 16.3 MP
Image save format		JPEG (Exif version 2.3), RAW (RAF), RAW+JPEG (DCF (Design Rule for Camera File System)/DPOF format supported)
		MOV (video: H.264, audio: PCM)
		FUJIFILM X mount
Permission		L: (3:2) 4896 x 3264 / (16:9) 4896 x 2760 / (1:1) 3264 x 3264 M: (3:2) 3456 x 2304 / (16:9) 3456 x 1944 / (1:1) 2304 x 2304 S: (3:2) 2496 x 1664 / (16:9) 2496 x 1408 / (1:1) 1664 x 1664 Panorama L: Vertical: 2160 x 9600 / Horizontal: 9600 x 1440 M: Vertical: 2160 x 6400 / Horizontal: 6400 x 1440
		1920x1080, 1280x720, 640x480 up to 60 fps
Light sensitivity		ISO 200 - 6400, expandable: 100, 12800, 25600 and 51200
Exposure range		1/4000 - 30 s (mechanical shutter) and 1/32000 - 1 s (electronic shutter)
exposition		TTL measurement with image sensor
Meter Mode		Matrix, center-weighted, spot
Exposure compensation		±3.0 EV (in 1/3 EV increments)
		Hybrid AF (Contrast AF / Phase AF): 49 areas (7x7) (5 focus area sizes)
		Mechanical and electronic
Continuous Shooting		8 fps (with active autofocus)
Image stabilization		Not supported (image stabilization supported by the lens)
		Swivel, LCD, 3", resolution 920k dots, aspect ratio 3:2
Viewfinder		Electronic, color, OLED-matrix, 0.39", resolution 2.36 million dots, 100% frame coverage (magnification 0.62x)
	Microphone	Built-in stereo microphones
		Built-in, mono
		Built-in (Guide number 5 (ISO 100) / 7 (ISO 200))
Data carriers		Memory cards SD, SDHC, SDXC
Interfaces		micro-HDMI (Type D), micro-USB, mini-jack 2.5 mm
Communication options
Battery		Li-Ion, replaceable, FUJIFILM NP-W126 (1260 mAh)
Charger		Input: 100~240V AC e.g. at 50/60 Hz Output: 8.4V DC e.g. 0.6 A
Lens		FUJINON XF18-55mm F2.8-4 R LM OIS
		118.4 x 82.8 x 40.8mm
		331 g (body only) / 381 g (with battery and memory card)
Official guarantee		12 months
Products webpage

Appearance, arrangement of elements

The design of the FUJIFILM X-T10 can be safely called a "timeless classic". Like the older model, the novelty is made in a retro style and resembles film SLR cameras: strict forms, chopped edges, a pseudo-prismatic protrusion and an abundance of analog controls. Unlike the FUJIFILM X-T1, the body of the device is not completely metal - metal is used only in the chassis, and the entire cladding is made of plastic with rubberized pads, except for the top and bottom. The material is quite practical (non-staining), providing pleasant tactile sensations and a fairly reliable grip. The camera is presented on the market in classic color variations: black and silver.

When comparing dimensions (118.4 x 82.8 x 40.8 mm) and weight (381 g) with the FUJIFILM X-T1 model (129 x 90 x 47 and 440 g), there is a gain on all counts due to some simplification of the design. But when comparing these parameters with a competitor in the face of the novelty, it is somewhat inferior in depth and weight. Nevertheless, the device is easily placed in a compact purse or a wide pocket of a jacket or coat (however, without a lens). And when worn on the shoulder or neck with a strap (a camera with a lens weighs almost 700 g), fatigue does not appear very quickly.

On the front panel there are: a FUJIFILM X mount with a lens release button, a focus mode switch (“AF-S”, “AF-C” and “MF”), stereo microphones, an autofocus illuminator and a command dial (by default, it is responsible for selecting the zone focusing, spinning and pressing (you can assign the desired function)). There is a small ergonomic protrusion with a textured finish.

The main part of the back side is occupied by a folding display. Above it is a viewfinder with diopter adjustment, a proximity sensor and a button to switch between display and viewfinder. On the left are the buttons for switching to view mode and deleting files, and on the right side are the autofocus and autoexposure lock buttons (“AEL” and “AFL”), as well as the control dial (by default, focus assist; pressed, but functions cannot be reassigned). To the right of the screen there is a multifunctional indicator and buttons for a quick menu (“Q”), changes in the displayed information / back during menu navigation (“DISP / BACK”), a five-way navigation block (the central part calls the main menu, and the rest can be reassigned) and programmable Fn button (wireless by default). At the junction of the back and side faces there is a large platform for the thumb.

On the sides of the FUJIFILM X-T10 are the strap lugs. In addition, on the left under the hinged cover there are three interface connectors: micro-HDMI (Type D), micro-USB and 2.5 mm audio for connecting an external microphone.

The upper end is densely filled with a large number of functional elements. In the central part is a pseudo-prismatic ledge with a "hot shoe" and a folding flash. On the left side you can see the mode dial (which also includes broach and bracketing) with a non-electronic flash release lever. On the right side there is a shutter speed dial with a lever for switching to fully automatic mode, a shutter release key (with a thread for the trigger cable) surrounded by an on / off lever, an exposure compensation dial and a video recording activation button (recording starts only after 0.5-1- second hold, can be reprogrammed).

On the bottom side are: a compartment for a battery and a memory card (with a hole for the FUJIFILM CP-W126 AC adapter), a metal thread for mounting on a tripod (offset relative to the optical axis) and a system speaker. When the camera is mounted on a tripod, the compartment with the memory card and battery becomes inaccessible.

In general, the ergonomics of the device is quite good, but at first it will not be very comfortable and intuitive when moving from cameras from other manufacturers. First of all, this is due to the large number of controls designed to work with the camera in a predominantly manual mode, and secondly, the lack of “P” / “A” / “S” / “M” modes in their usual sense. No, these modes are present, but their activation is achieved not by shifting a single drum, but by combinations of the positions of several drums on the body and a switch on the lens, like in good old film cameras. At first, this is very confusing and does not allow you to quickly switch to the desired mode, and in the end you just activate the full automatic. But having got the hang of it and remembering the sequences, everything becomes very convenient, and the movements become operational.

The grip is quite good, so it is convenient to hold the camera with one hand, but because of the small and not the most comfortable handle, the hand has to be squeezed harder for greater reliability. There is a remark about the control dials (on the front and back) - they have a very easy move, albeit with a quite distinct step, but false positives can occur even if you accidentally hold your finger.

The build quality of the FUJIFILM X-T10 is excellent: the parts fit well, without any hint of play or third-party sounds during operation. Unlike the flagship, the case does not have dust and moisture protection.

Display, viewfinder

The FUJIFILM X-T10 is equipped with a 3-inch (7.5 cm) LCD screen with a traditional 3:2 aspect ratio and a resolution of 920,000 dots. It is characterized by sufficiently high detail, excellent color reproduction with a good level of contrast and excellent viewing angles. The image on it is perceived very lively and contributes to a very good disclosure of the capabilities of the proprietary sensor. The brightness level of the display is quite high and allows you to work on a sunny day without any problems.

The hinged design of the display unit covers a range from 45° down to 90° up. This allows you to shoot comfortably from the top and bottom positions. Unfortunately, the screen is not touch-sensitive, which would be useful for focusing, navigation, and other functions.

The digital viewfinder (0.39 inches) with a magnification factor of 0.62x (in FUJIFILM X-T1 - 0.77x) and 100% frame coverage is based on an OLED matrix with a resolution of 2,360,000 dots. The aspect ratio is 4:3. It is very pleasant to sight: excellent color reproduction, comfortable viewing angles, excellent detail (pixels are not visible at all), no strobe, invisible delay (0.005 s response time). I wish the eyecup was a little bigger and softer.

By the way, there are several modes of operation of the display and viewfinder: “Display only”, “Viewfinder only”, “Viewfinder based on proximity sensor only”, “Display and viewfinder based on proximity sensor”. Switching between the display and the viewfinder takes about 1 second, which is a bit much. I would like it to be an order of magnitude faster, because if you don’t prepare, you can simply lose the composition of the future frame.

Interface, opportunitiessettings

The FUJIFILM X-T10 camera received a very functional and sometimes a little cluttered interface that requires some getting used to the location of various settings, modes and functions. The main settings menu is presented in the form of a vertical scrolling list (8 rows, 5 of which are shooting menus, 3 are parameter settings, plus 3 more for viewing mode settings). After adaptation, everything becomes very convenient to use, especially if you do not pay attention to the abundance of abbreviated words in Russian and Ukrainian localization.

There are a large number of controls on the body of the device, including on the lens, which should definitely appeal to experienced photographers. In addition, as many as seven keys can be reprogrammed at your discretion - not every professional SLR can boast of such. The reconfiguration process itself is very simple and straightforward: it is enough to hold the function button for 2 seconds and the settings menu appears with a considerable set of available functions. The bottom button of the five-way navigation block is responsible for direct selection of the focus point (or any of the navigation blocks when the corresponding parameter is activated in the camera settings). A good form is the presence of a pop-up menu of quick settings, which is presented in the form of a matrix of 16 elements. As a result, the need to enter the main settings menu simply disappears - all the parameters necessary for quick configuration are present here. In addition, their location can be configured independently.

In the Live View mode, the grid, histogram, main parameters, focus area, distance to the subject, and the virtual horizon are displayed on the screen and to a greater extent on the viewfinder. Especially for the display, an additional mode is provided with an expanded display of shooting parameters and a histogram, but without displaying an image from the sensor.

In general, the speed and smoothness of the interface does not cause any complaints. For a more detailed acquaintance with the functions and visual operation of the camera, you can watch our video.

Lens

Together with the camera (exact index X-T10 (16470881)) we received a complete FUJINON XF18-55mm F2.8-4 R LM OIS lens for testing. It is characterized by medium dimensions (65.0 x 70.4 mm) and a noticeable weight (310 g), as well as the presence of a stepper motor for focusing (Linear Motor). The body of the lens is completely metal - this is a plus, but the fact that the focus, zoom and aperture rings are also metal is a minus. In some cases, they are quite slippery. The color of the lens is black and mostly high quality. However, with a careless attitude, you should be prepared that the paint will peel off the rings.

The optical design of the lens includes 14 elements in 10 groups, including 3 aspherical lenses and 1 low dispersion lens. The viewing angle is 79.1° - 28.4°. Uses a circular 7-blade aperture with a minimum f/22. The focal length is 18 - 55mm, which corresponds to 27 - 84mm in 35mm film equivalent. Quite the usual characteristics for a universal zoom lens, which will be sufficient for most everyday tasks. Carving under the filter with a diameter of 58 mm. The minimum focusing distance is 18cm at wide angle and 40cm at telephoto. There is optical image stabilization (OIS).

The build quality is good, and there are no design defects. Of the useful markings, there are only focal lengths and a pointer for aligning the lens with the camera. But the aperture value can only be seen on the screen or in the camera's viewfinder, but this decision is due to the fact that the ring has a full turn. Convenient switches are provided for selecting the mode (aperture priority) and activating / deactivating optical stabilization. The focus and zoom rings spin very smoothly, the move is medium tight. The aperture ring with a wider notch has clear positions and a soft click when moving between them. The focusing process is absolutely silent.

Hardware, functionality

The FUJIFILM X-T10 is based on the proprietary X-Trans CMOS II sensor with an original color filter and irregular pixel arrangement, eliminating the need for an optical low-pass filter (OLPF). Matrix format - APS-C (23.6 x 15.6 mm, crop factor 1.5), effective resolution - 16.3 MP. The proprietary EXR II is used as an image processor. There is an ultrasonic cleaning of the sensor.

The lens is mounted via the FUJIFILM X mount. At the moment, you can count on the use of two dozen lenses: from telephoto zooms (such as FUJINON XC50-230mm F4.5-6.7 OIS) to fast apertures (such as FUJINON XF35mm F1.4 R). In addition, using the FUJIFILM M Mount adapter, you can install third-party lenses, including manual ones.

The process of switching on and creating the first frame (together with the zoom lens) takes less than 2 seconds, which is far from the fastest result, but quite comfortable. The speed of command processing, as well as transitions between modes, is at a fairly high level.

The camera is capable of shooting photos and videos at ISO 200 - 6400 (base mode, shooting in RAW), but can be expanded to ISO 100 - 51200 (shooting in JPEG only). Changing the ISO in manual mode is carried out in increments of 1/3 EV.

The burst rate of the FUJIFILM X-T10 is pretty good, around 8fps in CH mode and 3fps in CL mode. The data buffer paired with the memory card showed the following results: RAW and RAW + JPEG - 8 frames each, JPEG - about 14 frames. In the "CL" mode: RAW and RAW + JPEG - 12 frames each, JPEG - limited by the size of the memory card. It is worth noting that the data buffer, when compared with the FUJIFILM X-T1, which is similar in technical characteristics, has an artificial limitation in order to avoid competition within the line.

The camera is equipped with two shutters: mechanical (with shutter speeds from 30 s (in P mode from 4 s) to 1/4000 s) and electronic (from 1 s to 1/32000 s). Manual exposure (bulb) up to 60 minutes. It is possible to conduct interval shooting in increments of 1 second to 24 hours (total 999 frames).

FUJIFILM X-T10 is equipped with a hybrid autofocus system (Intelligent Hybrid AF): phase sensors located in the green pixels of the matrix cover about 36% of the central part of the frame and are paired with 49 contrast focus points across the frame. With manual focus, it is possible to increase the aiming area, highlight the sharp edges of the object (focus peaking) and the Digital Split Image tool (digital image separation system). There is an interesting possibility of focusing on the eyes of the model and face recognition.

The built-in flash has a standard design and incredibly fast, or rather instantaneous, release when the lever is moved. Its operating range covers 5 or 7 m at ISO 100 and 200 respectively. The flash sync speed is 1/180s. There is a "hot shoe" with the ability to install and connect additional accessories.

Among the communication interfaces, there is only a built-in 802.11b/g/n Wi-Fi module. Mobile devices (Android or iOS) require the FUJIFILM Camera Remote app to be installed. There is the ability to view and save footage, as well as remote shooting (selection of focus point, ISO, film type, WB, flash mode, timer, exposure).

As mentioned above, the FUJIFILM X-T10 camera does not have "P" / "A" / "S" / "M" modes in their usual form. Instead, the mode dial contains panorama mode (horizontal and vertical), multiple exposure, creative filters "Adv1" and "Adv2", shooting modes (single-frame "S", serial "CH" and "CL"), bracketing modes "BKT1" and "VKT2" (by exposure, by ISO, by film model, by dynamic range, by white balance). Also worth noting is the presence of a fully automatic mode with recognition of up to 58 different scenes.

Other interesting software features when shooting: interval shooting, dynamic range correction, proprietary film modeling (11 types), correction of dark and bright areas, long exposure noise reduction and high ISO values, Lens Modulation Optimizer (compensates for slight blur at the periphery of the lens).

Movies can be recorded at a maximum resolution of 1920 x 1080 (Full HD) in MOV format at 60 fps with progressive scan and stereo sound. The total bitrate reaches 38 Mbps. Before shooting, you can change the exposure and ISO settings. It is also desirable to set the focus mode to "AF-C" (continuous, in the camera it is called "Wide"). There is a connector for connecting an external microphone, however, not 3.5 mm, but an unusual 2.5 mm.

QualityImages

FUJIFILM X-T10 Camera Shot Examples

The FUJIFILM X-T10 allows you to shoot high-quality footage that visually rivals the older FUJIFILM X-T1. Thanks to the proprietary non-Baer matrix X-Trans CMOS II, the picture is not only well detailed, but also pleases with very vivid colors even in cloudy weather. All FUJIFILM cameras have a unique color reproduction of greens and blues, which is so appreciated by many photographers since the days of film cameras (by the way, the Japanese manufacturer is still engaged in the production of photographic film). From this follows another feature of the devices - color profiles that simulate branded films, which will be an excellent help for the flight of creative imagination. It is worth noting that when shooting in RAW, all profiles will be available when processed in the editor.

It is noteworthy that despite the orientation of the camera in manual mode, the novelty works perfectly on full automatic: it adequately selects the shutter speed (if possible, using the minimum ISO value and relying on the capabilities of OIS), aperture and white balance depending on the scene being shot. Perhaps there is not enough full-fledged "HDR" mode here, but it can be simulated by manually adjusting the tone of highlights and shadows, as well as using the "DR" parameter (AUTO and 100% - base values, 200% of ISO 400 and above, 400% from ISO 800 and above).

The complete lens demonstrates excellent sharpness (drops a little at wide angle) and minimal manifestation of chromatic aberration. The built-in stabilizer compensates for about two steps of shutter speed when shooting handheld. The aiming accuracy, stability and speed of the hybrid autofocus system are at a very high level.

FUJIFILM X-T10 Camera Shot Samples at ISO 100, 200, 400, 800, 1600, 3200, 6400, 12800, and 51200

FUJIFILM X-T10 Camera Shot Examples with Noise Reduction (JPEG) Activated: -2, 0, +2 for ISO 6400 and ISO 51200

Based on our traditional tests, the FUJIFILM X-T10 can safely shoot at ISO 3200 in RAW and 6400 in JPEG. At ISO 12800, you can get acceptable photos for blogging, social media, or home printing in sizes up to and including A4. With a subsequent increase in ISO artifacts "cut" the eye.

FUJIFILM X-T10 daylight example at 1080p (1920 x 1080) at 60 FPS

The camera records video in Full HD quality at up to 60 fps with good stereo sound. The picture looks good and very smooth, but automatic at such a frequency likes to raise the ISO value, which ultimately manifests itself in an abundance of noise, especially in dark areas of the frame. You can correct the situation by using manual settings and shooting at a frequency of 30 fps. However, the possibility of video shooting for FUJIFILM cameras is mostly just a nice bonus, because the main focus is on photography.

Offline work

The FUJIFILM X-T10 is powered by a FUJIFILM NP-W126 lithium-ion battery with a capacity of 1260 mAh (7.2 V; 8.7 Wh). In real conditions, it turned out to shoot 280 frames and 5 minutes of video. In general, not bad, and the indicator will change depending on the settings of the device and the activity of the shooting itself. If you plan to shoot frequently, for example, while traveling, we recommend purchasing an additional battery.

The package includes a small FUJIFILM BC-W126 charger (8.4 V DC, 0.6 A) with a replaceable mains cable. The process of restoring the battery charge takes approximately 1.5-2 hours. USB charging is not available.

Results

Excellent camera in the best traditions of FUJIFILM. The body of the novelty is made in a retro style, with an abundance of analog controls, most of which can be easily reprogrammed to fit your needs. The device not only looks stylish, but also pleases with its relatively compact size and generally good ergonomics. Thanks to the swivel display and high-quality OLED viewfinder, it is convenient to control the shooting process in most situations. The proprietary 16MP X-Trans CMOS II sensor paired with the included FUJINON XF18-55mm F2.8-4 R LM OIS lens delivers highly detailed photos with vivid color reproduction even in auto mode at ISO 6400. The camera has a wide variety of modes, features, creative filters, and settings to bring out the photographer's ideas. Among the communication modules is 802.11b/g/n Wi-Fi, giving you the ability to connect to devices for easy viewing, sharing and printing footage, as well as for basic remote control of the camera.

It is pleasant to state that this model is devoid of noticeable shortcomings, and the existing ones are due to the manufacturer's desire to exclude competition from the flagship FUJIFILM X-T1. These include a reduced data buffer size, a high lower ISO threshold when shooting in RAW, poor video quality, lack of a touch screen and a standard HDR mode.

As a result, if you have been eyeing FUJIFILM X-T systems for a long time and are not ready to significantly overpay for a more confident grip, dust and moisture protection, as well as a larger data buffer, then you can safely buy FUJIFILM X-T10.

Advantages:

• classic appearance;
• high quality performance;
• relatively compact and quite ergonomic case with an abundance of controls and flexible options for their settings;
• high-quality swivel display and excellent OLED viewfinder;
• good kit lens FUJINON XF18-55mm F2.8-4 R LM OIS;
• a wide fleet of optics, including through the FUJIFILM M Mount adapter;
• high-quality X-Trans CMOS II matrix with proprietary color reproduction and an effective resolution of 16.3 megapixels;
• electronic shutter with shutter speed up to 1/32000 s;
• high-quality hybrid autofocus system;
• continuous shooting up to 8 fps;
• the ability to obtain high-quality images at ISO values ​​​​up to 6400 units;
• the presence of a Wi-Fi module.

Disadvantages:

• small data buffer size;
• high lower ISO threshold when shooting in RAW;
• low video quality;
• lack of "HDR";
• lens rings do not have rubberized pads.

FUJIFILM for the camera provided for testing.

We express our gratitude to the Ukrainian representative office of the companyTranscend Information Inc. for the provided memory card.

Article read 3200 times

Subscribe to our channels

Fujifilm's business approach deserves respect. In order to reduce production and research costs, cameras of different classes use the main components from the top model. As a result, the buyer receives high image quality, and the company - pleasant economic indicators. Of course, the devices are different. However, everyone is concerned about the question "by how much?" not in monetary terms, but in qualitative terms, which is sometimes impossible to measure. Today, using the Fujifilm X-T10 as an example, we will return to the search for answers again.

At the time of the heyday of film photography, the market was dominated by two form factors: a reflex camera with interchangeable lenses and a “soap dish”, of varying degrees of simplicity - from cardboard, disposable, to very advanced, with zoom lenses.

During the transition to digital registration of photons, they were taken as a basis, inspiring designers and constructors.

When the technical need for a mirror disappeared (at least for most potential consumers), the creators turned to another form factor that was common at the time - rangefinders. Fujifilm started the second coming to the digital photography market with the rangefinder X-Pro1, now the company's lineup includes the X-E and X-A series. However, the “mirror” appearance for devices with interchangeable lenses, proven over the years, is not only better perceived by a wide range of buyers, but also provides some ergonomic advantages.

Externally, the Fujifilm X-T10 is very similar to SLR cameras, only instead of a pentaprism, a rising flash and elements of an electronic viewfinder are placed in the characteristic protrusion of the body.

Compared to the flagship X-T1, it is smaller and lighter by about 10%. Nevertheless, it is comfortable to shoot holding the device with one hand (unless, of course, the lens outweighs). This is facilitated by a pair of protrusions on the front face of the case and under the thumb on the back.

The buyer can choose between an all black version and a black and silver version that looks more "antique". The design is carefully worked out, the device looks simply amazing.

It is possible to call the X-T10 a simplified version of the X-T1, but it is wrong to interpret "simplification" as a "deterioration in capabilities" for the most part of the characteristics.

Let's start with management. The X-T10, like other T-series cameras, involves the active participation of the photographer in the selection process. The shutter speed dial is located on the right side of the top panel, next to the Shutter button and the exposure compensation dial.

Under the shutter speed dial, instead of a switch for measuring illumination methods, there is a lever that turns on a fully automatic mode - an ideal solution when the camera is allowed to “take pictures” of a family member not burdened with photographic knowledge.

The Shutter button again has a mechanical connector for connecting a cable (by the way, I sometimes miss it in the X-T1).

The wheel located on the left controls the "drive modes", if such a term is applicable to digital photography. Is it worth it to regret the ability to quickly change the sensitivity? No. Firstly, the matrix works well in the range of 200-6400 (more on this later), and secondly, the device allows you to configure three options for automatic ISO selection with minimum and maximum limits, as well as a limitation on the shutter speed (up to 1/500, which more than enough even when using telephoto optics). If you really need to set ISO 200, then this is very quickly done either through the Q-menu or through a well-thought-out set of user settings, and there can be as many as seven sets.

Along with a choice of single shot and continuous shooting (two speeds), this wheel quickly switches between one of two bracketing options, built-in filters, as well as multiple exposure and automatic panorama stitching.

A lever under the wheel raises the flash mechanically. The lamp is shifted upward relative to the optical axis of the lens. The design does not provide for the deviation of the light flux manually, but it looks very reliable. If it is required to exclude the direct hit of the light of the pulse on the subject (for example, when photographing with external led light flashes), an ordinary mirror or a nozzle made from improvised means helps.

The Fujifilm X-T10 has two wheels for changing settings, one under the thumb on the rear panel, the second - in the range of the index or middle finger on the front. Both support pressing.

The LCD screen on the rear panel has one degree of freedom - tilt. The angle is slightly lacking when shooting in the position of the camera overhead. The aspect ratio is photographic, the image is formed from more than nine hundred thousand elements.

The camera has seven programmable buttons. Add seven slots for storing custom settings, called up with just a couple of swipes through the Q-menu, and you have a perfectly controllable device.

The battery and memory card are located in a common compartment on the bottom of the case. The tripod socket is offset relative to the optical axis of the lens.

The connectors for connecting a computer, TV, wired remote control or external microphone are covered by a cover on the left side of the unit.

The body of the X-T10 is made of magnesium alloy, but it lacks the dust and moisture protection that attracts travelers from the older model. Like other devices of the T-series, the build quality and finishing materials are very high.

Functionality

In terms of components that affect image quality, the X-T10 is absolutely identical to the flagship X-T1. The same proprietary (non-Baerian) X-Trans II CMOS 16-megapixel APS-C format sensor with integrated phase detection autofocus sensors, the same EXR Processor II processor. The bundle provides an ISO sensitivity range of 200-6400 for RAW and 100-51200 for JPEG.

The differences that affect the ease of management have already been mentioned. But the main difference is in electronic viewfinders.

The X-T10 electronic viewfinder uses an OLED panel with 2.36 million pixels. This is immediately noticeable, since even the smallest details of the future frame are clearly visible.

However, the magnification of the optics is x0.62 compared to the fantastic x0.77 of the X-T1. Only the Sony ɑ 7R II is better (x0.78), but its price tag in the US is $3200 and this is without a lens. For comparison, the top five-figure Canon SLR camera has this figure x0.76, while its competitor from Nikon has x0.7.

With automatic focusing, information from 15 phase sensors integrated into the matrix is ​​​​used. However, this is not the only source, since the picture itself is also analyzed, and at 77 points. As a result, the speed and accuracy of focusing are quite high, and the photographer gets additional opportunities.

The most interesting is face detection and automatic selection of the model's eye as the focusing point. Through the menu, which one is set - right or left, or the solution to this creative issue is left to the mercy of electronics. Given the presence of several excellent fast "portrait" lenses in the line of optics, this is a very useful feature. It works perfectly with a person in the frame, the recognition accuracy is high, so much so that even a black-and-white artistic portrait printed in a magazine does not raise unnecessary questions from the processor.

Phase sensors are located in the central part of the frame (5x3) and the contrast calculation points are all over the plane of the frame, with a rectangular matrix 11x7, which is much better than a “mirror” rhombus with “blind” corners.

The autofocus software has been radically updated this summer and is now available for a number of other Fujifilm cameras. The X-T10 has it right out of the box. In addition to defining the eye, it should be noted that the size of the area can be selected from a point to a rather large square and rectangle.

Burst speed can reach 8 and 3 fps in the respective modes. This is a good indicator for a device aimed at amateurs, but the buffer capacity is small. If you use a high-speed card, for example, Kingston 64 GB SDXC UHS-I U3, then after the buffer is full, the camera continues to shoot about one frame per second. The buffer is released very quickly, while the device can continue to be used.

Continuous autofocus works during continuous shooting, and the photographer can choose from several algorithm options - point, zone or wide tracking area.

Despite the graduation of shutter speeds in whole steps of exposure, in manual and priority, you can set the time with an accuracy of 1/3 step - this is done by one of the parameters change wheels. Similarly, the lens aperture is controlled, where there is no ring for manually entering a value.

The sensor and processor give very good noise and dynamic range results when shooting at ISO 200-6400. This allows you to safely use the automatic selection of sensitivity, since the current firmware version allows you to set three sets of minimum and maximum values ​​with a maximum shutter speed for each.

Exposure bracketing is perhaps the most important among other “fork” modes. And here there is a claim to Fujifilm engineers. They still think three shots are enough. Yes, if bracketing is used for safety net, then we can agree with this approach. And if to create frames with extended dynamic range? Despite the possibilities of RAW, I would like to get at least five frames (ideally - seven, with a choice of both the number and pitch of the fork).

Another interesting, but not very useful function in the existing implementation is interval shooting. Firstly, the maximum number of frames is 999, which corresponds to approximately 33-40 seconds of video. Secondly, the minimum interval between frames is a whole second. In some cases, such as when shooting from a fast moving car, this is a lot.

The battery life according to the manufacturer is 350 frames. Test shooting confirms that this figure corresponds to the real state of affairs. Unfortunately, charging the battery inside the camera via USB (as, for example, in the X-100T) is not provided.

Image quality

The work of the matrix and the processor can be safely assessed as "excellent". As usual, the raw files from the camera (JPEG and RAW) are available for download and close self-study at this link.

Fujifilm is still stuck at 16 megapixels. Perhaps this is not enough for professional work in some areas, but for a hobby it is quite enough.

The ISO range of 200-6400 is working, although at 6400 a narrowing of the dynamic range is already noticeable. The nature of the noise is calm and almost “analogue”, at least it is not annoying.

Good color reproduction in JPEG has become one of the hallmarks of Fujifilm devices. It's not just the official imitation of classic analog tapes. Before shooting, the photographer can change the nature of the picture within a relatively wide range, or “develop” RAW directly in the camera.

RAW has a large "margin of safety". Files perform decently at 2 stops underexposure even at ISO 3200. Overexposure is best not to joke, although some recommend it as a means of combating noise in the shadows. After one step, the degradation of individual colors (primarily yellow) begins.

Fujinon 16-50mmf/3.5-5.6 OIS Lens

The X-T10 is sold without a lens or bundled with Fujinon 16-50 f/3.5-5.6 OIS and Fujinon 18-55 f/2.8-4 R LM OIS or other optics. I tried the link with 16-50 f/3.5-5.6. This lens belongs to the budget XC series, however, it gives an excellent picture. Sharp throughout the frame, with minimal distortion. All lenses are glass, although the housing (including the bayonet connector) is plastic.

The optical stabilization system proved to be the best. This shot was taken without a tripod (I relied on an advertising structure) with a shutter speed of 0.63 s. In the corner is a cropping at 100% without processing. As you can see, the sharpness is sufficient for printing, not to mention viewing on the screen. In a series of ten frames, two turned out, for a half-second shutter speed almost from hand, the result is good. In the gallery of examples there is a shot with a fountain, where the shutter speed was 1/7 s, in the series almost all the shots were sharp.

Eventually

The X-T10 is the ideal solution for those who wanted a camera with the merits of Fujifilm's T-series, but weren't ready to part with the tidy sum that flaunts on the X-T1's price tag. Many of the shortcomings mentioned in this material relate more to the special applications of the camera and in no way detract from its merits in everyday photography.

Liked:

Image quality
+ Ergonomic
+ Much of the top model for less

Did not like:

- Shooting in RAW is limited to ISO6400
- Battery not charging via USB

	Fujifilm X-T10 kit (16-50mm) Black Notify when available
Camera category	Compact camera with interchangeable lens
Type	CMOS
Size	23.6×15.6
Number of megapixels	16
Maximum frame size	4896×3264
Interchangeable lens	+ (Fujifilm X)
Focal length, 35mm equivalent	24-75
Maximum aperture	f/3.5-5.6
optical zoom	4x
Min. focusing distance, m (normal mode)	0,28
ISO sensitivity	auto, 100-51200
Exposure range, sec	30-1/4000
Modes: Shutter Priority/Aperture/Manual	+/+/+
Manual focus	+
white balance	auto, 8 presets, manual
Continuous shooting, frames / sec.	8
Exposure compensation, EV	+/-3, 1/3
metering	center metering, matrix, spot, center-weighted
Built-in flash modes	auto, force fire, slow sync, flash off, red-eye reduction
File types	JPEG, RAW
Max. frame size; fps (fps)	1920×1080 (60fps)
Video Format	MPEG-4, H.264
Viewfinder	digital
LCD screen (diagonal in inches; number of pixels)	3", 920000
Swivel screen	+
Image stabilization system	+
External flash socket	+
Built-in microphone	+
Memory cards	SD (SDHC, SDXC)
Built-in memory, MB	—
Interface	USB 2.0, Micro HDMI
Nutrition

If you take a flagship mirrorless camera, cut off a few not-so-demanded features, leave the same sensor and add a few new features, and sell it almost twice as cheap, what will happen? There will undoubtedly be a camera that will be of interest to a wider circle of amateur photographers.

Details and examples of images taken with the Fujifilm X-T1 can be found under the cut. Most of the shots are untouched in Photoshop, but with my usual processing in Lightroom. Some duplicates (similar photos) were made with different proprietary Fujifilm "film" color profiles.

Fujifilm X-T10 | Appearance and control

The retro look has been in vogue in the mirrorless market for several years, and Fujifilm is exploiting this trend to the fullest. All Fuji cameras give the impression of vintage, replete with "twists" for manual control, made in the good old-fashioned film aesthetics. In the hands of a photographer, they are constantly confused with film / Leica / Zenith and ... that's good.

Fujifilm X-T10 I would classify as a medium-sized mirrorless camera. It is definitely smaller than the flagship X-T1, which, in turn, is not as large as the “mirror-sized” Samsung NX1, but it is also far from the size of pocket mirrorless cameras on the X-T10 inch sensors.

ISO 200 | 56mm lens at f/1.2 | shutter speed 1/28.000 second

At the time of the release of the camera, it turned out that the new autofocus functions that were later added to the X-T1 with a firmware update were first implemented in a simpler model. To date, in terms of autofocus, the models have caught up.

There is one more programmable control buttons - 7 instead of 6 on the X-T1. You can reassign the functions of the buttons over a wide range, choosing the control for yourself.

In connection with the refusal of extended weather protection, the thread for connecting a mechanical (vintage) cable release was returned to the camera. If someone has one left, from his father or grandfather, you can adapt it for remote descent when working with a tripod.

The weight of the camera has decreased - if the X-T1 weighs, with a battery and a flash drive, about 440 grams, then it turns out to be 60 grams lighter. The battery lasts, according to measurements according to the CIPA standard, for the same 350 shots, but my experience shows that many times larger numbers are achievable.

Fujifilm X-T10 | General conclusions

I've always loved color on Fujifilm cameras, and with the advent of the Classic Chrome ceto profile, I like it even more. It's not even about delicate handling of shades and good skintone, but also about branded color profiles that provide such a delicious color in JPEG output that not every photographer can get from RAW by default, especially if the converter does not support branded color profiles. That is, the X-T10 is the case when you can shoot and upload directly from the camera to the Internet without finishing it.

The sensor gives excellent sharpness and a clean image at high ISOs, provides a good dynamic range, and Fujifilm lenses traditionally ring and blur beautifully. I like the picture from super fast fixes - especially the good old 35 / 1.4 and the relatively new 56 / 1.2 (the latter gives 84mm EGF - a classic for fashion photography).

It is a pity that neither in the fixes themselves, nor in the camera, there is no stabilization. It would not hurt, especially when paired with an electronic shutter. If you need it, look towards the zooms.

A separate question is the choice of a RAW converter for working with Fujifilm. In Adobe products, despite the initiative of Fujifilm specialists, a rather controversial rendering algorithm is still used, which can lead to some “drawnness” of the picture. Apple Mac owners should look towards Iridient Developer or RPP or Capture One Pro, Windows PC owners will have a slightly lower choice. Alternatively, you can use the “proprietary” Silkypix Developer Studio.

It can also be considered as a budget second or spare camera if you shoot commercials on the X-T1 and need a second “carcass”. With the same picture and similar rate of fire, it will work through most cases.

As a single camera, the X-T10 is also interesting, but for reporting and high-speed shooting, when you need to shoot in series and work with a buffer and fast memory cards is critical, I would not use the X-T10. Despite good tracking focus, face recognition, high burst shooting speed, this camera, in my understanding, was created for a more measured and non-machine-gun rhythm of shooting.

Once upon a time, I sincerely considered the X-Pro 1 a very compact model, which , and the X-T10 surpassed it in all respects, becoming more convenient, more advanced and more customizable. The “correction of mistakes” in terms of ergonomics is also pleasing - compared to the flagship X-T1, there are fewer accidental button activations under the fingers during shooting.

In general, Fujifilm turned out to be a solid product for demanding amateur photographers with an anti-crisis price tag. The X-T10 is a good picture, beautiful color, and to reduce the cost, exactly those features of the flagship X-T1, which are generally not important to amateur photographers, have been removed.

In the second part of the review I will talk about Wi-Fi, which allows you not only to transfer pictures from the camera to a smartphone or tablet, but also to control the camera remotely.

Fujifilm X-T10 | Sample photos - TRAFFIC! 121 photos!

The absolute majority of the pictures below were not processed in Photoshop - only color correction in Lightroom, most often using standard imitation of Fujifilm corporate colors through profiles sewn into the program.

detailed information

Specifications Fujifilm X-T10 Kit Yandex.Market data

Camera
Camera type	mirrorless interchangeable lens
Lens
Support for interchangeable lenses	Fujifilm X Mount
Lens included	yes, please check the model with the seller
The matrix
Total number of pixels	16.7 million
Number of effective pixels	16.3 million
Size	APS-C (23.6 x 15.6 mm)
crop factor	1.5
Maximum Resolution	4896 x 3264
Matrix type	X-Trans CMOS II
Sensitivity	100 - 3200 ISO
Extended ISO values	ISO6400, ISO12800, ISO25600, ISO51200
Functionality
white balance	automatic, manual installation, from the list, bracketing
Flash	built-in, up to 5 m, red-eye reduction, shoe, D-TTL
Image stabilizer (still image)	optical, moving element in the lens
Shooting modes
Shooting speed	8 fps
Maximum burst	8 for jpegs
Timer	eat
Timer running time	2.10s
Time-lapse mode	eat
Aspect ratio (still image)	3:2, 1:1, 16:9
Viewfinder and LCD screen
Viewfinder	electronic
Using the screen as a viewfinder	eat
Viewfinder field of view	100%
Viewfinder pixels	2360000
LCD screen	920,000 dots, 3 inches
exposition
Excerpt	30 - 1/32000 s
X-sync speed	1/180s
Manual setting of shutter speed and aperture	eat
Automatic exposure processing	shutter-priority, aperture-priority
exposure compensation	+/- 3 EV in 1/3-stop increments
Exposure metering	multizone, center-weighted, spot
Exposure bracketing	eat
Focusing
Autofocus type	hybrid
AF illuminator	eat
Manual focus	eat
Electronic rangefinder	eat
Face focus	eat
Memory and interfaces
Memory card type	SD, SDHC, SDXC
Image formats	2 JPEG, RAW
Recording mode RAW+JPEG	eat
Interfaces	USB 2.0, HDMI, audio, remote control socket
Nutrition
Battery format	your own
Number of batteries	1
Battery capacity	350 photos
Video and audio recording
Video recording	eat
Video recording format	MOV
Video codecs	MPEG4
Maximum video resolution	1920x1080
Maximum movie frame rate	60 fps
Maximum frame rate when shooting HD video	50/60 fps at 1280x720, 50/60 fps at 1920x1080
Optical Zoom when recording video	eat
Sound recording	eat
Other functions and features
Housing material	metal/plastic
Additional features	tripod mount, orientation sensor, HDR shooting
Dimensions and weight
Size	118x83x41 mm, without lens
Weight	331 g, without batteries; 381 g, with batteries, without lens

Opinions about Fujifilm X-T10 Kit All reviews on Yandex.Market

Grade 5

Advantages: 1. Lens 18-135 - finally shows what has always been unreasonably expected from this kind of zoom and only now received: sharp and "airy". Pentaksovsky did not lie nearby.
2. Excellent stabilizer.
3. Excellent color camera jpg. I compared the Panasonic LX-100 (it seems to be a rather big matrix, good optics and a high price) - but it's better not to compare ... It feels very reliable.
4. Various bracketing modes on the left dial are convenient.
5. In general, convenient custom control.

Disadvantages: 1. The set with 18-135 is unexpectedly large and heavy (in contrast to A1 + 16-50), in particular, the lower functional one is sometimes pressed inappropriately. The lens is slightly larger than the Pentax counterpart.
2. The grip, taking into account paragraph 1, is not very convenient. The correction wheel is a little tight (again compared to the A1).
3. Something I don’t understand the principle of operation and indication in aperture priority. If you put control from the carcass - something jumps value. In the dark (relative) it is also not displayed.
4. Navigator keys are devoid of symbols, and without them it is not very convenient (although this is a price for customization).

Comment: I downloaded and installed the equalizer from the site (there is no disk included) ... the well-known stripped-down snares gave the color at least no better than from the camera, which, on the one hand, pleases (good camera), on the other, slightly discouraging. .. In general, it seems that your favorite snares (even about 6.0.20) do not cope well with the cameras of the latest releases (nikon 7100, mentioned Panasonic, now here's fuj).
In general, the camera fully justifies expectations, taking into account some branded nuances (after all, there is a corporate color!) And a slightly overpriced price (well, this, again, is the general policy of Fuji and the Central Bank of the Russian Federation with its support for a stable ruble exchange rate).

After several trips to nature, the impressions are the best. Photo (including some full sizes) here https://fotki.yandex.ru/users/vlminaev/album/222602/

Minaev Vladimir February 27, 2016, Ryazan

Grade 4

Pros: + Completely different approach to camera control. To get the classic modes, you need to combine the settings on the shutter mode dial and the items in the menu. Most of the buttons are configurable, the drive dial (shooting type) is also half configurable. As a result, the two most popular modes A and M are fully deployed on two control dials (+iso on the front wheel), analog control turned out to be incredibly convenient, there is no need to go into the menu during the shooting process.
+ The whale lens (16-50) deserves a separate review, but I'm too lazy. Good glass. Wide angle, high sharpness (ringing at f / 5.6), no HA. In the dark, focusing smears, especially at the far end. Colors and contrast also drop at the far end. As a standard landscape width (16-23) is ideal.

Disadvantages: - Found a bug when working with a Sony SDHC UHC1 card. When viewing the captured RAW + F, "Reading Error" pops up on some frames. After this error, when viewed from a computer, jpeg turned out to be littered (10-15% gray bar), and raf was not read by CameraRAW. I didn’t track the prerequisites, it arises spontaneously, now on one frame, then on another. The error was seen only on RAW + F frames.
- When using an electronic shutter, the central contact on the shoe does not close, i.e. the flash does not fire. Why and why the developers made this software restriction is not clear.
- Noise canceling is too aggressive. With iso6400 set to NR +2 - it makes people in the frame - anime heroes. At 0 - better, but still there is soft and a significant drop in sharpness. Optimally, but not ideally -2, even at this value there is almost no micro-contrast. You can't get a perfectly sharp shot at iso above 1600 on this camera. Perhaps in the future they will release a new firmware with more gentle noise reduction algorithms. So far only NR -2, always.

Comment: ± There is noise at all iso values, but they are predominantly luminance. At 6400, the noise is certainly obvious, but its structure is similar to film grain. Above is no longer a fountain, but with processing it is possible to draw something out of them. Filmed at night on iso25600 - a couple of filters, b / w, resize and frame can be safely in the album. At the same time, low microcontrast is observed at all isos, which, coupled with noise reduction, can significantly blur the image.
± EVI pleased with the absence of brakes and high resolution, of course, the interference in poor lighting is large, but you quickly get used to them and they do not interfere with focusing. But the size, or rather, a slight increase in EVI and its small window do not allow the eye to relax.
± The body is tightly assembled, the materials (semi-metal alloy / plastic / rubber) are quite pleasant and, judging by the forums, wear-resistant. But still there is a feeling of "toy". When I saw the camera, I expected to feel the weight and coldness of a 1970s rangefinder, and in my hands I found myself with a warm, airy plastic mask with a "proud" Made in Taiwan on the cover ... The ergonomics of the case is designed only for shooting with two hands and wearing the camera on a neck strap. The leather semi-holster (China, thanks) significantly improved the grip and allowed the use of a wrist strap.
***
This camera is hardly suitable for reportage shooting or photo hunting. Features of the X-Trans matrix, high working iso and beautiful noise, but a significant loss of micro-contrast. It is this balance between the two characteristics of the matrix - this is the "chip" of Fujifilm.
In general, I am satisfied with the camera as an artistic tool, I use it with ancient Japanese optics, in this union the matrix shows itself in all its glory. The x-t10 fully justifies its marketing position "for amateurs - enthusiasts".

Kolmakov Alexey February 15, 2016, St. Petersburg \ Experience: several months

Grade 5

Advantages: The quality of photos in a jeep, convenient operation, balanced size and weight, design.

Cons: price in Russia

Comment: I have been fond of photography for a long time, twenty years, but without fanaticism. Used last 10 years Nikon, D60-300-3100-7000-3300-7100. I tried almost all the lenses available to me (20-50 sput), except for specialized and exotic ones: Sigma, Tamron, and Nikon, 5-7 pieces each. I searched for a long time and unsuccessfully for the most important thing for me: a detailed picture with natural colors right from the camera, without climbing through the menu for 15 minutes before each photo. I bought for testing everything that appeared on sale up to 50 sput, DSLRs, compacts, no difference, all to no avail. Two weeks ago I bought a Fujik XT10 / 18-55 and realized that the search was over, I got what I was looking for for so long. The picture is excellent, fully consistent with the requirements.
If my approach is relevant for you, do not waste time and money, use the experience.
I want to supplement the comment after some time has passed, or rather today, 12/22/2015. Do not listen to anyone if you do not want troubles in the form of processing in editors (but then you can buy any camera where Ravs stretch well), if you need a cool thing that is nice to own and that will ALWAYS give good results, buy X-T10. And yet, if without processing, then a dozen will do any other Fujik, except for the X-T1, so they have the same picture.

Kokin Vadim December 23, 2015, Moscow \ Experience: less than a month

Grade 5

Advantages: Stylish impeccable design, photo quality, color reproduction, ergonomics, screen, viewfinder, sharp lens

Cons: Weak battery, no battery grip.

Comment: It all started with the fact that in the summer I bought fujifilm x-a2. I bought just like that, based on a modest budget, a camera for family and travel. At the same time, I had a Nikon D7100 with a fleet of optics as the main camera for work. For 10 years he worked only on Nikon, D50, D300 and D7100. I planned to buy a full frame, but now I say goodbye to Nikon. The X-A2 made me a die-hard Fuji fan. And now I bought an X-T10 for work. This camera gives images much better than amateur (semi-professional) DSLRs. Working ISO up to 6400, a nice clear picture with incredible colors. In the X-T10, everything is done very conveniently. Management thought out to the smallest detail. The screen and viewfinder are pleasing to the eye. The video is also quite decent, although I do not need it. Autofocus is accurate and fast. For me, this is the best camera at the moment, I have explored many options. The first photos can be viewed here https://fotki.yandex.ru/users/androsoff2910/album/158061/

Androsov Alexey December 16, 2015, Lukhovitsy \ Experience: less than a month

Grade 4

Advantages: Zenith design, compactness compared to DSLRs, a good viewfinder, high-quality body materials (although it feels plastic, but they write magnesium). Decent sharpness and color reproduction, flexible settings for any of the 6 hot buttons. Decent noise level at ISO 6400. Batteries are enough for a shooting day. Phone control is quite convenient. The flash is hidden in the case.

Disadvantages: The price could be lower by 10-30%, the low speed of switching the display to the viewfinder, the lack of HDR mode and night mode, not the fastest focus (compared to Sony, Panas, Oliks). Significant noise above Iso 6400 (in fact, ISO12800 and 51200 are not needed) Zooming with the wheel is inconvenient (the X20 had buttons).
Compared to competitors, there is no touch screen and video recording is rather weak. They simplified the program switch dial, removed the image scroll wheels, confused and complicated the ergonomics of mode selection compared to the ideal X20. The screen in selfie mode does not recline.

Comment: Switched from X20. I didn’t notice a difference in autofocus speed, hybrid is hybrid. The 2007 Canon 400D DSLR focused subjectively faster. In general, I am satisfied with the device. The dark lens in the kit saddens, but there are options with 18-55 F2-2.8 more expensive.
Climbed into a Lowepro Apex 110 AW bag. Spare batteries for 300-500 rubles can be purchased in China.

Grade 4

Pros: Great menu with lots of customization options! Very fast AF - almost like the nikon d600! Good shutter and control. Awesome manual focus capabilities - but will they work with a Nikon adapter and lenses? Good display and viewfinder! Impressive color reproduction. Also the size and weight.

Disadvantages: But not without a fly in the ointment! And there are several!!! I took the camera in addition to the nikon d600 and the optics box. For this reason, I could not resist and compared them. I read in many places that x-t10 caught up with the FF in terms of the matrix, etc. It turned out that no! And the old nikon d600 is still better in resolution and ISO (by 1.5-2 steps = although this is a great achievement)! Yeah against physical. the size of the matrix can not be trampled !!! BUT that's more! The real tar was ahead. I have been a fujivod for more than a year and all this time, as a cat from valerian, I was impressed by an old xe1. I could not resist and compared them before selling xe1. What was my amazement when I did not find a difference in the matrices of 1 and 2 generations, i.e. xe1 and xt10!!! The latter only slightly better conveyed the color of a small fragment of the photo! The grip of the camera is for women's hands, but additional. the handle decides everything and almost does not increase the size and weight.

* good electronic viewfinder. efficient in the bright sun and in the dark - fast enough for frame-by-frame shooting to comfortably navigate only through it.
* convenient folding screen
* good speed of the device as a whole, including focusing speed
* convenient dimensions and light weight of the camera body and lenses
* convenient small on-camera flash included - helps out in field conditions (not a panacea, but if you urgently need to highlight hard shadows in the sun - it will do)
* good video - quite suitable for a home collection

Disadvantages: * the electronic viewfinder is inconvenient to use with glasses - it is impossible to cling to the viewfinder as comfortably as it was on the 5DMII. There is a diopter adjustment, but there is a feeling that its range is not suitable for everyone - check before buying or adjust
* the electronic viewfinder (and the camera as a whole) freezes during continuous shooting - the last frame freezes in it until it clears the buffer to some of its level of work (i.e. some of the frames are not saved from the buffer to the card). Out of habit, through the viewfinder, with the second eye closed, it is not immediately clear that the model/children have already left the frame. You can't fix it, you can improve the situation by buying a super-fast card or switching to JPEG - reduce the camera's freezing time.
* the sleep/wake mode is sometimes buggy (does not turn on the camera, you risk losing the frame while the camera wakes up). it is safer to turn off the camera yourself. The camera turns on quickly enough.
* vaunted manual control knobs often go astray when folding and getting out of the bag due to the lack of a rigid fixation (I often go astray - shooting mode on the left and exposure compensation on the right). Train the habit of looking at the knobs before shooting (I haven’t brought the check to automatism for three months of use).