Reading time ≈ 10 minutes

Comfortable furniture- this is one of the important components home interior. Everyone associates a rocking chair with comfort, because it is so nice to sit in it by the fireplace with a cup of tea and relax. This piece of furniture can fit into any style, and also serve as self-decor. You can make a rocking chair from wood yourself; to do this, consider photo examples with drawings and progress of work.

Design Feature

You can swing on the chair anywhere, calming your nerves and relieving stress. This is one of the simplest and available funds for relaxation. You can buy it in furniture stores, order it on the website, or make it yourself in a home workshop.

Why is the rocking chair so popular:

At the same time, you can place the chair anywhere: in the bedroom, in the home office, and on the terrace country house, and even in the office. How to make a rocking chair with your own hands from wood using photos and drawings will be shown in a video with the progress of the work and detailed instructions.

Wooden construction has its advantages:

The main part of the rocking chair is arc-shaped skis or runners, due to which rhythmic rocking occurs. If the runners are made long, the amplitude and depth of the swing will be large, you can smoothly move from a sitting position to a lying one. And if you assemble it with short runners, the swings will be insignificant, soft and smooth. These chairs are more suitable for older people.

Wooden chair on runners

Types of chairs

Today you can find a huge number of models wooden rocking chairs of various shapes, sizes, breeds, styles and purposes.

Rocking chairs are:

To make a rocking chair for your dacha with your own hands from plywood, you will need drawings and instructions experienced craftsmen as in the video below.

Depending on the type of chair design, there are:

How does rocking happen?

Many people assemble rocking chairs according to ready-made drawings, but the products may not always fit the size of a particular person. Therefore, before starting production, you should understand the kinematics of this product:

• If a person stands upright, the center of gravity (CG) of the body is between the lower back and the sacrum inside the spinal column. If a person is in a sitting position, the CG shifts slightly forward and down. In rocking products, the overall CG is always shifted back and down to its original position. In this case, there is a slight error in the projection of the main center of gravity in relation to the supporting surface (floor, soil, etc.), which can be corrected at the end during balancing.
• The stability of the structure is most affected by the displacement of the overall CG relative to the vertical central axis (CO). If the CO coincides with the COG, this is a state of free balance, which is impossible to achieve in a rocking chair. If the center of gravity is greater than the center of gravity, there is a high probability of tipping backwards. It is necessary that the central center is 450 mm or more higher than the central central point (recommended excess is 600-700 mm).

In other words, the overall center of gravity of the rocking chair should be shifted from the seat to an angle intermediate between the back and the seat. The supporting legs are two arched strips, thanks to which smooth swinging is possible. The amplitude depends on the length of the runners.

How to choose material and design

Modern models of rocking chairs are made from various materials, each of which has its own characteristics:

To make a rocking chair from solid wood, it is best to use coniferous species: larch, pine, alder or spruce. The density and weight of such wood are low, which is very convenient when working with the material.

Tips from the experts:

Assembly steps

Modern furniture manufacturers are ready to offer a huge range of models various forms, colors, styles and materials. However, if you have the time and desire to independently assemble a home rocking chair, you should safely purchase everything necessary materials and get to work.

The simplest model

Tools and materials:

1. Screwdriver or drill.
2. Tape measure for measurements.
3. Self-tapping screws.
4. Special wood glue.
5. Electric jigsaw.
6. Thick cardboard for patterns.
7. Sandpaper for sanding.
8. Sheet of plywood.

Step-by-step instruction:

How to make a rocking chair with your own hands is shown in the video master class with detailed step-by-step instructions.

Rocking chair with curved skis

For assembly you will need:

1. Tape measure for measurements.
2. A simple pencil.
3. Graph paper.
4. Screwdriver.
5. Electric jigsaw for working with wood.
6. Sander.
7. Metal confirmants.
8. Wood board for cutting skis 300/20/4 centimeters.
9. Board for frame 300/10/2 cm.

Country chair with curved skis

Step-by-step assembly instructions:

In most cases, additional balancing of the product will be required so that the chair does not cause inconvenience when rocking, sitting down and standing up.

How to balance a swing structure:

A rocking chair will always remain a desirable piece of furniture, because it is so pleasant to sit in it and forget about all the problems. It is not at all necessary to spend a lot of money on a purchase; you can make such a product yourself. A ready-made instructions and the drawings will help with this.

Most people associate a rocking chair with home comfort, rest, and relaxation. Sitting in it, it’s nice to drink a cup of coffee, read a book or dream by the fireplace, covered with a blanket, on a long winter evening. Regular rocking calms, relaxes, and gives peace. It’s not for nothing that everyone loves to swing so much even on ordinary chairs, often breaking them. But it is not always possible to purchase rocking chairs - they are not cheap. In this case, you can make the item yourself.

Types of rocking chairs

There are a great variety of rocking chairs. They differ in design, scope of application, material of manufacture and upholstery, design.

Type of design

Rocking chairs can be divided into the following types according to the type of structure.

1. On simple radius runners - skis, rocker arms, arcs. These chairs were the first to appear and are still in use today. They are easy to manufacture, but have a drawback - the risk of tipping over when strongly rocked. In this regard, they are made with a low landing so that the center of the generating circle is greater than the center of gravity. There are also varieties with a closing horizontal arc. This model requires the construction of individual drawings taking into account the height and weight of the person for whom it is intended.
2. On runners of variable curvature. They have no risk of capsizing. Thanks to their length, when tilted back, they prevent the chair from falling, and when tilted forward, they simply push the person out of the seat. When making this model, it is better to use a ready-made drawing, since the process of its construction is quite complicated.
3. On elliptical skids. They swing very softly. They are often equipped with bumpers at the rear, a step at the front, or springs. It is not possible to make a model on springs at home; this requires special types of wood or a rubberized metal strip.
4. Glider - sliding rocking chair. Unlike previous designs, its base remains stationary. It swings due to the installed pendulum mechanism. This piece of furniture is difficult option for the beginning master.
5. Vanka-vstanka is a garden tumbler chair. Does not lose stability in any position. This is due to the fact that the seat is also runners. If you lean back too much, the chair will move to an almost horizontal position, but will not turn over, and with a little effort it will return to its original position. It is quite difficult to construct a drawing of such a chair, but you can use a ready-made one.

Options for rocking chairs depending on the structure - photo gallery

The classic rocking chair has the main disadvantage - the risk of tipping over when strongly rocked Elliptical bars provide smooth swinging On runners of variable curvature there is no risk of tipping over The glider chair will not leave marks of scuff marks on the floor in your home. The Vanka-Vstanka rocking chair does not lose stability in any position, and from the side it resembles a person lying down

Glider - the ideal chair for young mothers - video

Variety of materials

The following materials can be used in the manufacture of rocking chairs.

1. Tree. Conifers, oak and larch are suitable for this. The craftsman will need experience in wood carpentry and knowledge of how to connect parts.
2. Plywood. The best option for a novice craftsman would be plywood. Working with it will require a minimum of skills and tools; all parts can be cut out with jigsaws.
3. Vine and rattan. It is better not to take on the job without the skills to work with these materials. You will need skills in the area correct preparation, drying and processing of vines, as well as weaving skills. In addition, it is worth considering that the rattan palm does not grow in Russia; its homeland is Indonesia and the Philippines.
4. Metal. Products made from it are durable, strong, but heavy. To work with this material, you need special welding or forging skills, as well as pipe bending equipment if the chair is made from pipes. As a rule, the frame is made of metal, and the seat is made of wood. Such a chair in an apartment can damage the floor, and it looks more appropriate in a country house or in country house.
5. Profile pipes. Suitable for making elliptical arches. This material, like any metal, also requires welding skills.
6. Plastic pipes. Lightweight, durable, easy to work with. All you need is fittings and blowtorch. Moreover, the cost of such a product is low.

Types of materials for making rocking chairs - gallery

Plywood is suitable for making a chair by a novice craftsman The rattan palm does not grow in our country, its homeland is Indonesia and the Philippines To work with metal, you need welding or forging skills Polypropylene pipes are light, durable, and easy to work with. Conifers, oak and larch are the most popular materials for making rocking chairs To make products from wicker you will need special skills

Application options

Depending on the place of use, rocking chairs are divided into items for home or street use. If you plan to use the product for outdoors(dacha, garden plot), keep in mind that the material will be affected by sunlight, precipitation, and air temperature.

Metal is not afraid of changes in humidity. It only needs to be treated with an anti-corrosion compound. Because of heavy weight It is better to place such a chair on a stone base. It will push through loose soil or a wooden podium. The best option for the street - metal product With wooden seat or with removable cushions.

Wooden chairs must be treated with a waterproof coating. This must be done especially carefully if the product is made of plywood. Before assembly, hot drying oil is applied to the ends of the parts, and then they are slightly flattened with a hammer so that moisture does not penetrate inside. After this procedure, the elements are coated twice with waterproof varnish.

Wooden rocking chairs should not be kept outdoors all the time. Otherwise, the product may lose its original appearance.

The most successful street version chairs are made of plastic. They do not rot, are not afraid of the sun and wind, and do not require protective coating. Such products are durable and lightweight, they can be moved to any place if necessary.

You should not use chairs with soft upholstery, it is better to cover them with a blanket or put removable pillows. The upholstery will get wet in the rain and deteriorate.

“Street” seating options - gallery

A chair made of plywood and wooden planks is the simplest option for a novice craftsman A plywood chair with a roof will save you from sunburn The rocking sofa can accommodate several people at once Plastic pipes are enough inexpensive material, even a beginner can make a rocking chair out of it

How to make a rocking chair with your own hands

Things made with your own hands carry a completely different energy than purchased ones. When making them, you can make any of your wishes come true. Making a rocking chair is not difficult; even a beginner can cope with this task. You need to be patient and follow the step-by-step instructions exactly.

Types of handmade chairs from various materials - gallery

You can cut a chair of absolutely any shape from plywood. The presence of a footrest creates a greater relaxing effect A chair covered with threads will surprise your guests A wooden chair with soft upholstery will help you relax after working day An armchair made from natural materials is suitable for an eco-style interior This original rocking chair will decorate your country house Pipes can serve as the basis for a future chair Wrought iron rocking chair will look organically on your summer cottage Knitted elements in interior items create a homely atmosphere A pipe and a tree will always be found on the farm. You can easily make a country rocking chair from this material

We turn the most ordinary chair into a rocking chair

The easiest option to get a rocking chair quickly and inexpensively is to make it from an old but strong chair or armchair. You only need to make a couple of runners. To ensure structural stability and prevent tipping, the center of gravity must be shifted downward. To do this, the legs need to be filed under the arches on which the chair or armchair will later be attached.

How to make runners from solid wood - video

Instructions for making a vanka-stanka

To make this chair yourself, it is better to use plywood. The drawing can be constructed by making calculations with your own hands, or you can use it already ready-made diagram.

Preparing tools and materials

Before starting work, you need to prepare materials and tools. You may need:

• electric jigsaw with wood files;
• disc sander with a set of attachments of various grain sizes;
• screwdriver or drill;
• hammer;
• brush;
• sheet of plywood 20-30 mm thick;
• 50x25 mm block for cladding;
• 3 connecting bars 30x50 mm;
• self-tapping screws or confirmants;
• wood glue;
• wood antiseptic;
• primer or drying oil;
• dye;
• roulette;
• pencil;
• graph paper.

Now you have everything you need. Before you start next stage, treat the plywood sheet with an antiseptic. While you are working on the drawing, it will dry.

Drawing a diagram

The design of the vanka-stand does not require taking into account the individual parameters of future users. If you wish, you can make amendments to the finished diagram. For example, if necessary, such a chair can be made double. Thus, we will assume that you have the drawing.

We transfer it to graph paper, and then to thick paper in the full size of the parts. We cut out the patterns and draw out the sides. We will make them from plywood, fasteners from bars, sheathing from slats.

Both sidewalls must be absolutely identical, there must be no bulges or irregularities on the swinging surface, the line must be smooth!

We make parts

Using an electric jigsaw, he cuts out sidewalls from plywood and connecting drawers from bars. Best connection the chair parts are spiked. If the drawing provides for it, we make tenons and cuts for them in the sidewalls. We cut the facing strip from the slats. To ensure that there are as few scraps as possible, when choosing slats, ensure that their dimensions are a multiple of the finished plank. If you have any leftovers, keep them, they will be useful to you when the product needs to be repaired.

We sand all the parts, grind them, and then chamfer them. We process the ends especially carefully. We lightly break their fibers with a hammer so that moisture does not penetrate into them. All elements must be primed and painted, the ends - twice.

Assembling the chair

We connect the sidewalls with drawer bars. If you have finger joint, then we insert the tenons into the cuts under them, having previously coated them with wood glue. If not, then we mark the joints on the sidewalls, make holes with an 8 mm drill, and at the ends of the bars - 5 mm. We tighten it with the help of confirmants - euroscrews.

Now all that remains is to attach the facing strips. In order for them to lie flat, they must first be marked. Each board should have 4 marks, that is, 2 on each side. To make the work easier, you can make a template from a piece of slats by drilling 2 holes in it, then the work will go much faster.

To prevent the planks from cracking when fastening, drill holes along the marks with a thin drill and screw them to the side with self-tapping screws. The distance between the slats should be 15 mm.

Cover the product with primer and paint. The rocking chair is ready, you can enjoy it.

Video on making a rocking chair from plywood

Making a rocking sofa

Using the basics of making a Vanka-Vstanka chair, you can make a rocking sofa. In this case, you will need three side panels.

It's easy and comfortable armchair Suitable for both home and garden. The seat and back can be braided with leather strips, colored cord, or simply stretched with durable fabric.

Photo of making a chair on radius arcs

First make a drawing Prepare all the details of the future chair, mark the places where the elements will be attached Assemble the chair according to the diagram presented

Making a chair out of wood

Wood is a more complex material than plywood. There are several options for drawings of wooden rocking chairs.

The product can be without armrests and have a back that follows the curves of the back.

If you do not have sufficient woodworking skills, you can make a chair whose elements are straight lines. The only exception will be arcs.

The procedure for making such a chair is the same as for the plywood model.

1. We make drawings and patterns.
2. We cut out the material. A board of 3000x200x40 mm will be used for the runners, and a board of 3000x100x20 mm will be used for the remaining parts.
3. We sand and polish.
4. We prime and paint all the elements.
5. We mark the joints of the parts and drill holes for the bolts.
6. We do the assembly.
7. We put a soft pillow and swing.

How to make a rocking chair out of wood for a child - video

We use a pendulum mechanism in the manufacture of a glider

To make such a chair, you need to have good drawings. Although, there are craftsmen who build them themselves, taking dimensions from factory products. The pendulum mechanism is assembled on ball bearings. This applies to both metal and wooden structures. The seat should not be attached to the base, but suspended from it. This allows the chair to swing in a horizontal plane.

How to make a metal pendulum chair - video

Making a wicker chair from wicker

Wicker products are widely popular. If you know how to weave from wicker, you can make such a chair at home. However, the process of making it is quite long and requires patience and effort.

It should be noted that wicker chair should be comfortable and durable. Its flexibility is achieved due to the vine, which is also an environmentally friendly material.

We use plastic pipes to simulate the sound of the sea - video

We make a chair from metal “like wicker”

If you know how to forge products, then it will not be difficult for you to make a rocking chair from metal. It can also be made by welding profile pipe, better than the elliptical section. The seat, back and braid of the armrests can be made from ropes, belts or strips of fabric.

A simple metal chair for a summer cottage - video

If one person managed to create something, then another will certainly be able to repeat it. All you need is desire and strict adherence to instructions. And it’s not so important what your chair is made of. If you put your soul into your work, the result will bring joy.

Everyone associates a rocking chair with comfort and coziness, and you immediately want to sit in it by the fireplace in a country house with a cup of hot coffee. This is a very beautiful and original interior element that fits into almost any style. In addition, swinging on a chair is good for your health. This way you can relax, relieve stress, gain strength, quietly read your favorite book, listen to music or just take a nap. You can make a rocking chair from wood yourself; let’s look at examples with photos, drawings and work progress using several technologies.

Features of wood structures

Most often, furniture is made of wood, so the rocking chair was no exception. Why do many people choose this particular material:

What makes this chair so attractive:

How to make a rocking chair with your own hands from wood according to the drawings is shown in the video with instructions and progress of work.

Types of chairs

There are many various models chairs, all of them may differ in their functionality, dimensions, style, materials and the presence of additional gadgets. We always choose furniture based on our preferences and habits, and the rocking chair was no exception.

Let's consider several design options for rocking chairs:

Work technology

To figure out how to make a rocking chair with your own hands from wood according to the drawings and the right sizes, you need to purchase all the necessary materials and tools:

• Screwdriver.
• Paint brush for filling fastener holes.
• Hammer.
• Straight angle with ruler.
• Disc grinding machine.
• Self-tapping screws.
• Jigsaw for cutting blanks.
• Clamp.

1 way

To create a rocking chair, you can use an ordinary chair, shortening its legs and attaching this structure to runners. To appearance was attractive, the chair can be woven with ribbons of leather or plastic. If you wish, you can also sew your own cover for the rocking chair.

To make the structure a more interesting shape, you can cut the sides from plywood according to a pre-calculated pattern. The edges of the plywood should be well processed.

Plywood edges

Then we connect the two resulting parts to each other using three bars (30*50*600 mm).

To post top part, we use thin boards and strips of plywood (10*50*600 mm).

In some cases, the length can be increased so that the slats extend beyond the edges of the sidewalls. After assembling the chair, it can be varnished or painted.

Method 2

We begin the process of creating a rocking chair with a drawing. For a high-quality result, a sketch is required. In addition, we will be able to save ourselves from large errors in calculating the amount of material.

Operating technique:

3 way

We will assemble a rocking chair according to the drawing, using high-quality types of wood. We use the usual one as a base. wooden chair. All parts will be mounted at right angles, so there is no need to additionally cut out many elements.

Now you can create a rocking chair yourself and please your household. The main thing to remember is that the product can be scratched, and the material can quickly age and lose its appearance. Therefore, always varnish the chair so that it will delight you with its beauty for a long time and create comfort in your home.

An armchair is a comfortable and popular piece of furniture, used in both home and work environments, and for relaxation, such as a rocking chair. We will look at its features and the possibility of making such furniture with our own hands today in the article.

Types of chairs

The main types of this comfortable furniture:

• homemade- designed for relaxation (reading, afternoon rest), in addition, they serve as a stylish addition to the interior;
• country garden- serve as furniture for communication and relaxation after a hard week, work in the garden or vegetable garden;
• office chairs- help staff and executives relax during short breaks between work.

By type of design, rocking chairs can be divided as follows:

• with radius runners- the very first species created by humanity has a large swing amplitude and can roll over;
• with runners of variable curvature- stable, do not tip over;
• elliptical runners- often equipped with a step, springs, bumpers, and have a soft “ride”;
• tumbler- the simplest option, often used in summer cottages, the runners are also a seat;
• glider - modern design, which swings using a pendulum mechanism.

In principle, the purpose of a rocking chair is one thing - rest and relaxation under measured rocking. Chairs with arched runners or gliders are very much appreciated by pregnant women and nursing mothers. Measured rocking calms the nerves, relieves tension and fatigue, the baby behaves calmly during feeding and falls asleep better.

In general, such furniture is very conducive to sleep: if you are tormented by insomnia, then rock for a few minutes with a cup of warm milk or herbal tea will correct the situation. Rocking in the same rhythm has a positive effect on the parasympathetic nervous system, and the shape of the curved backs relaxes the spine, relieving tension from it; this effect is also beneficial on the autonomic system of the body.

Why does the chair rock?

The center of gravity of such furniture is shifted from the seat to the angle between the seat and the back. The legs are two stripes in the shape of an arc, which allow you to swing without special effort from the side of a sitting person. The amplitude of the swing depends on the length of the runner legs: the longer, the stronger the angle of inclination of the chair, up to the “reclining” position. Short runners give a small swing for measured, sedate rocking.

Did you know? The first man-made chairs were throne furniture for supreme rulers. This furniture was made of expensive material and could be inlaid precious stones, gold, ivory. According to archaeologists, the back of Tutankhamun's throne was almost completely buried in gold trim.

Materials that are suitable for building a rocking chair

List of materials - basic and for individual furniture parts:

• tree- high-quality wood has an appropriate price, but the furniture always turns out stylish, durable and cozy. Processing such raw materials requires minimal knowledge of carpentry; in addition, you need to select the right materials for final processing, which will protect the tree from external influences;
• plywood- for the amateur this is the best comfortable material, it is easy to process, the main thing is to think about reliable fixation of the parts. The disadvantage of the material is that it is not suitable for the street;
• wicker or rattan- an excellent option for furniture, but weaving needs to be learned, and the material is difficult to obtain; you also need to know the processing rules;
• metal- working with it requires both skills and special tools, but when correct processing it is a strong and durable material that is resistant to weather conditions;
• profile pipes more suitable for the manufacture of parts than the entire structure, they are strong and durable, but require skill;
• plastic pipes- also a good option if you don’t have special skills. Cheap, light, easy-to-work material, not afraid of weather tests.

Did you know? There is still a lot of controversy about the origin and authorship of the invention of the rocking chair. It is undeniable that the English dictionary in 1787, the new phrase “rocking chair”, literally “rocking chair”.

Determination with chair type

Wicker furniture looks stylish, beautiful, it is comfortable and light, but not all models fit into the urban interior. This option is ideal for a summer residence. The chair can be placed on the veranda or terrace; it can be easily moved into the house (for example, for the winter); ensembles with tables and small footstools look especially good.

Another great one suburban option- metal products, where the frame is metal, and the seat and back are made of wood.

Important!In apartment conditions, metal runners can cause significant damage to the floor finish.

A good option is a folding rocking chair made of wood, which can easily be removed from the street into the house. Sofa-type models with a wide cross section deserve special attention. Just a godsend for a summer house - an option with a canopy: the product can be placed in the garden and you can relax quietly in its shade.

A lightweight tumbler-type plywood model can be placed not only on the terrace, but also in the garden.

Plastic products do not necessarily have cheap look- these can be stylish items with interesting design. The advantage of the product is price, durability (it is not afraid of pests or weather conditions), and light weight. The products are also quite suitable for modern interiors apartments.

Models for an apartment or house should, first of all, fit into the overall appearance of the interior, be easy to move, and, if possible, not take up much space if the room is small. A model made of bent plywood would be ideal in all respects: the product is not expensive, compact, it can be decorated with covers and pillows made of any material, the plywood can be painted in any desired color.

Lightweight wooden models will also go well with any type of furniture; a PVC strip is usually attached to the runners of such products to protect the parquet or other covering from dents or scratches. There are many models that have additional equipment: a pouf or a footstool.

An excellent option for a house or apartment is a glider: without skis, but only a pendulum mechanism, the model will not cause damage to floor coverings.

Low chair with short legs and soft pillows Suitable for a nursery and will become a child’s favorite place to relax. By the way, there are electronic products for sale for the little ones - good help mother when going to bed.

Luxurious openwork weaving made of wicker or rattan, depending on the type of model, can advantageously emphasize the design in different styles- “Provence”, ethnic, classic, Victorian. These are durable and lightweight products, and also natural, which is important during operation.

An example of building a simple rocking chair

The most simple model- on two sidewalls with crossbars. The sidewalls will be made in the shape of a boomerang, 14 crossbars are attached to them with a distance of 4 centimeters between them, the crossbars will be supported by supports made of timber.

The main material is plywood 1.5 cm thick, in addition to it you will need:

• self-tapping screws;
• jigsaw;
• drill or screwdriver;
• a simple pencil;
• roulette;
• cardboard for patterns;
• sandpaper;
• wood glue.

The sequence of actions is as follows:

Paint the finished model with any composition of your choice (stain, paint). The back side of the frame can be upholstered with leatherette, and a mattress made of the same material can be sewn onto the seat and backrest. Upholstery options and models may vary, depending on your preferences and purpose of the furniture.

An example of making a real rocking chair

Without knowledge of woodworking, it is nevertheless possible to make a simple product with parts that do not have curved lines, with the exception of skis.

To work you will need:

• wooden board 3000/200/40 mm for skis, for the main structure a board with dimensions 3000/100/20 mm;
• graph paper;
• pencil;
• roulette;
• jigsaw with wood saws;
• screwdriver;
• confirmants;
• grinder.

Further work consists of the following stages:

Converting an ordinary chair into a rocking chair

Surely every household has old chair, which has nowhere to put. New life You can give it to him by turning him into a rocking chair. At the same time, if the chair is upholstered, you can change it to fabric with a more modern pattern.

Important! The chair needs to be prepared, namely, the rear legs must be filed a little, thereby shifting the center of gravity. You need to file with ready-made runners in order to avoid mistakes.

To work you will need:

• chair;
• jigsaw with wood saw;
• board for runners 4 cm thick;
• sandpaper or sander;
• cardboard for patterns;
• pencil;
• ruler;
• screwdriver;
• bolts.

Further sequence of actions:

Making a product yourself with a minimum of knowledge is, in principle, not difficult. Difficulty may arise when working on arches for runners, so at the end of the article we offer you video instructions on how to make runners from wood.

Video: how to make a rocking chair

A rocking chair has always been a very convenient item for relaxing at the dacha or in a country house. But not every lover of such relaxation knows that it is possible to make a rocking chair with your own hands if you have certain knowledge, skills and simple tools. Moreover, a rocking chair is associated not only with country holidays. Now there are many models of this type of furniture for apartments and even offices. Manufacturing variations vary from the standard wicker version to the modern chair in.

In contact with

Classmates

Rattan rocking chair

As we said above, the variety of rocking chairs in modern life impressive. For example, a rattan rocking chair has a cozy appearance and will fit perfectly into the interior of your dacha. Rattan is a plant that grows in forests South America and is also called a flexible vine.

Note!

In terms of strength, it is not much inferior to willow twigs.

Chairs from this culture are woven without the use of screws and bolts, and all connections are made using glue and skillful knitting. Unfortunately, rattan does not grow and is not sold here, only in finished product, so making such a chair with your own hands seems unlikely.

DIY rocking chair video:

Wicker chair

A very popular type is the wicker rocking chair. A common element of any summer cottage or even apartments in our latitudes. This chair is woven from willow wicker and looks great against the background garden house, cottage or greenery of your garden. Wicker rocking chairs made from willow wicker are lightweight and very durable. But such furniture has one small drawback. When it is damp or raining outside, it is advisable to hide such chairs in the house, as they are afraid of excess humidity.

Material for making a chair

Rattan and wicker chairs willow twigs require special skills. Therefore, if we are going to make a rocking chair with our own hands, then the most acceptable option would be a wooden one. Let's look at what we might need to make it:

1. with a set of knife blades.
2. Disc-type sander with coarse and fine-grained attachments.
3. with drills.
4. Roulette and angle with ruler.
5. Hammer and .
6. Brushes, pencil.

Execution of the drawing

Before you begin work on making a chair, you need to draw a simple drawing of a rocking chair made of plywood. An example of such a drawing is shown below.

First of all, it is needed for precision manufacturing products and correct calculation required material. Let's apply a template for the side of the chair on a metric grid, in 1 cm increments. Then, for convenience, we will transfer the resulting chair template onto plain paper. Then it will be easier for us to transfer the outline of the chair onto the plywood. Don't be alarmed by small inaccuracies. It is important that the sidewalls are made identically and that there are no protruding corner elements in the lower rolling part.

Cutting out parts

First you need to cut out three drawers (in other words, screed) from plywood, 3 cm thick, measuring 120 by 800 mm. The sides are cut out using electric jigsaw strictly according to the pattern. Then we take a beam 50 mm wide and 25 mm thick and cut 35 pieces 120 cm long. From these beams we will subsequently make the seat and backrest.

Consider the amount of waste from purchased timber. The total length of the timber can be easily calculated before purchasing and if, for example, its length is 2.3 m, then better width make the chairs a little narrower, it will be 115 cm, but there will be no waste. The dimensions of a rocking chair are not dogmatic, and if you see that they need to be changed a little to make better use of the material, then you can do this without any problems.

Workpiece processing

Applying grinder, it is necessary to treat the surfaces of the resulting workpieces and especially their ends. Protruding wood fibers at the ends must be flattened with a hammer and then treated with hot drying oil. This will protect the ends of your chair from moisture and extend its service life. After drying, you will need to process them again.

Product assembly

Using the drawings of the rocking chair, we begin assembling the product. We connect the two side panels using drawers. To do this, we mark the places where they are fixed. Logically, the best option They will be installed in the head area, in the middle and in the legs.

Note!

Fixing the tension strips to the sidewall must be done using a confirmat.

Confirmat is a screw tie for connecting wood materials. First, before fastening, we drill holes in the side panel 8 mm and in the end of the drawer 5 mm.

After this, we proceed to the manufacture and fastening of the seat. To do this, let us remember that we have as many as 35 of them in each block; we make four holes, two on each side. And then we attach the bars to the sides. For such a frequency of fastenings, a three- or four-millimeter self-tapping screw can be used as a fastener. Do not forget that in the process of fixing such a number of planks, you need to periodically check the evenness of their installation. Video instructions for assembling the rocking chair are in this article.

Processing the finished assembled chair

Analyzing reviews from amateurs who have practiced self-assembly rocking chairs made of wood and plywood, we can say that one of the main mistakes after assembly is poor-quality finishing or its absence at all. Therefore, we need to remind you that for the longest service life of the chair you need:

• holes above the screws.
• Treat with an antiseptic.
• You need to treat the surface with waterproof varnish two or three times.

1. Do wooden chairs better from high-quality types of wood. Such materials are pine needles, oak, larch. They have high strength, ductility and moisture resistance. A good option would be to use euro plywood. Chairs made from such wood will last as long as possible.
2. Plywood sheets must be selected with good ductility for easier subsequent processing.
3. Must produce finishing even when using high-quality wood. This will greatly increase the service life of the product.
4. It is strictly not recommended to cover the chair with foam rubber or fabric. The wood underneath will rot and rot, which will significantly reduce the service life of the product.
5. Try to keep furniture under a canopy, in a gazebo, or bring it home in wet weather to avoid unnecessary getting wet.

Rocking chair with lamp

Other types

There is another type of wooden chairs for children. The principle of their manufacture is identical to the option discussed above, only when making crafts you need to take into account the smaller dimensions, a different backrest angle and the presence of handles. A horse is often used as a chair.

Very original version products - rocking chair for office. It is covered with leather, and it has a very respectable, solid appearance. On such a chair, during the working day, you can relax and unwind.

Rocking chairs in high-tech style are distinguished by their very original design. Please note that the listed furniture is manufactured in a factory and has complex design and it's hard to do on your own.