We carry out:
- Cutting laminated chipboard
- MDF cutting
- Cutting plywood
- Cutting fiberboard panels
- HDF cutting
- Cutting panels trimmed with plastic
- Cutting veneer panels
- Cutting plastic
- Cutting plexiglass
- Sawing facade panels
- Cutting countertops
- Cutting postforming panels
- Production of multi-saw parts from chipboard and MDF.
All of the above materials are guaranteed to be sawed without chipping or tearing. When cutting, an automatic cutting center Holzma (Germany) and a format-cutting machine Feeder Capa 450 (Austria) are used. When ordering, a cutting map is drawn up for the best distribution of parts on the sheet, in order to obtain a minimum percentage of attacks. To speed up the cutting process, there is the possibility of batch cutting. We cut parts from both our own material and the customer’s material. 12 colors of laminated chipboard are always in stock High Quality: White Vanilla Gray Metallic Black Wenge Walnut Eco Alder Plank Cherry Portofino Cherry Beech White Oak individual orders We produce multi-saw parts, panels with a groove.
- Order production time is 5-7 working days.
- Urgent orders are processed within 3-4 business days.
* We provide free storage of completed orders for no more than 3 calendar days. If the order is not picked up on time, storage is paid separately at the rate of 1 pallet - 100 rubles per day.
**Ready orders are stored on a Euro pallet. When loading an order together with a Euro pallet, the customer gives a deposit of the value of the pallet at the rate of 250 rubles.
***Packaging of the order is paid separately, according to the prices given in the table. The order is loaded into the back of the customer's vehicle using a forklift.
Cutting laminated chipboard in Moscow– this is one of the main directions of our company. In addition, at the RASPILPODOLSK company you can order cutting of MDF, plywood, fiberboard panels, HDF, plastic, plexiglass, countertops, postforming panels.Advantages of ordering laminated chipboard cutting at the RASPILPODOLSK company
High-quality cutting of laminated chipboard. We use the German cutting center Holzma and the Austrian cutting machine Feeder Capa 450. High-quality equipment, which has long proven itself in the market, allows us to guarantee that the cutting will be carried out without chips and cracks, with the highest possible accuracy (0.3 mm). The panels are loaded automatically, which eliminates the human factor and, therefore, reduces the likelihood of defects to zero;Sale of laminated chipboards with cutting in Moscow. We offer cutting of customer's materials and our own. We always have 12 colors of laminated chipboard from the SWISS KRONO company in stock. We work with this manufacturer because we have seen from experience what exactly he offers best material. To make laminated chipboards, he uses only the best raw materials, which are absolutely safe for humans. When cutting laminated chipboard from SWISS KRONO, no difficulties arise, the edges are smooth and neat;
Cut the chipboard onto complex shapes . The Feeder Capa 450 cutting machine makes it possible to cut not only standard square and rectangular shapes, but also triangle, hexagon, trapezoid, etc.;
Urgent cutting of chipboard. The machines allow for batch cutting, which significantly speeds up work. If you need urgent cutting of chipboard in Moscow, contact us! The standard order fulfillment time is 5-7 working days, and urgent – 3-4 days;
Rational material consumption. Before cutting, a cutting map is drawn up, where the placement of parts on the sheet is optimized, thanks to this the amount of waste is reduced to a minimum, or there is no waste left at all;
Cutting laminated chipboard at a low price, which allows you to reduce your costs for preparing material for further processing. Saving on this service allows furniture manufacturers to reduce their costs and increase profits.
Cutting laminated chipboard according to customer dimensions (Moscow and Moscow region)
Cutting laminated chipboard is an important stage in furniture production. This process cannot be called simple; to use it you definitely need high-quality equipment; manual cutting will lead to the appearance of cracks and chips.Are you looking for where to cut laminated chipboard to your own dimensions? Contact our company "RASPILPODOLSK".
Also in our company you can buy laminated chipboard with cutting in Moscow. Ready-made high-quality elements are perfect for making furniture. With smooth parts without chips, the furniture will be of higher quality and with high aesthetic properties.
We have own production We are engaged in wholesale sales, so our important advantage is price. Cutting laminated chipboards is cheap, but at the same time high quality - this is what we offer our clients. If you are looking for a company that will cut laminated chipboard according to the customer’s dimensions (Moscow) or sell high-quality ready-made elements from laminated chipboard, then contact “RASPILPODOLSK”!
We have been producing and manufacturing cabinet furniture for many years, and over the years of cooperation with various clients we have gained excellent experience. Contacting us is a guarantee of high-quality work in the shortest possible time!
Edging laminated chipboard
We carry out edging of parts made of chipboard and laminated chipboard as thin PVC edge- 0.4 mm, and PVC edge 2 mm.
Cost of edging:
- PVC edges 0.4 mm thick - 40 RUR / p.m.
- PVC edges 2 mm thick - 80 RUR / p.m.
We carry out edging of radius and curved parts. Check availability and cost with company managers. You have the opportunity to send a request by mail on the website and our manager will contact you as soon as possible.
The edging is important stage in the process of making furniture. It involves applying a furniture edge to the end of chipboard/laminated chipboard parts. It allows you to protect the part from various mechanical damage, increasing the life of the furniture. In addition, furniture with an edge looks neater and fits better into the interior. A high-quality glued edge also ensures moisture resistance of the part, but this requires that it be applied by professionals using special equipment.
To get detailed advice on these and our other services, just call or write and our consultants will answer any question
We offer full complex services for cutting laminated chipboard according to customer sizes in Moscow. Professional cutting of laminated chipboard is a guarantee of quality in the manufacture of cabinet furniture. The Rich Wood LLC company will become your reliable contractor for the manufacture of any parts required sizes and forms.
- Straight
- Curvilinear
- Difficult
- Bevels
- Radii internal and external
- Cut the groove and quarter
Our suppliers:
- Egger
- Russian laminate
- Kronospan
- Kastamonu
- Rehau
With us you can use the services of a professional furniture designer. And from us you can order cutting of laminated chipboard without any extra charge on the material!
Cost of cutting laminated chipboard:
By collaborating with us, you pay money only for work! If you wish, you can place an order from your materials, paying only the cost of the service.
|
Chipboard sheet format 2440x1830 2500x1830 2750x1830 2800x2070 |
||||
|
Name |
Up to 200 m 2 (rub.) |
200-400 m 2 (rub.) |
Over 400 m 2 (rub.) |
|
|
Laminated chipboard, MDF (8-18 mm) / m 2 |
||||
|
Laminated chipboard, MDF (22-32 mm) / m 2 |
||||
|
Tamburat (40-60 mm) / m 2 |
||||
|
complex part (bevels) /pcs. |
||||
|
complex part (outer radius) /pcs. |
||||
|
complex part (inner radius) /pcs. |
||||
|
complex part (outer + inner radius) /pc. |
||||
|
Laminated chipboard (quarter under DVPO) / linear meters. |
||||
|
Laminated chipboard (cut at 45°) / linear meter |
||||
Our equipment park is professional machines For furniture production CNC cutting center GRIGGIO LINEA GS 32 and format saw "Martin"
Dear clients, in order to avoid errors with dimensions, we kindly request that you send drawings of parts, as well as products in isometric or other programs (Basis Furniture Maker), in clean overall dimensions without taking into account any allowances!
Our company is yours reliable assistant in production quality furniture for home and for sale. Save with us and enjoy cooperation. We are waiting for you!
HOW TO ORDER LDSP
Do you need to cut laminated chipboard? We will do it efficiently and quickly!
Our company provides the following services:
- cutting, dissolving, cutting
- chipboard milling;
- drilling parts;
- production of grooves and bevels.
Equipment for cutting laminated chipboards
The equipment used by the HOMAG GROUP company is high-precision, high-performance and has modern software control.
The advantages of this equipment: high productivity, the manufactured parts are not chipped, their dimensions and angles are made with precise dimensions (minimum cutting error).
Additional functions of the equipment: gluing quick-release labels on each part.
Dimensions of initial sheets and final parts of laminated chipboard
- thickness of the original sheets: 0.5-100 mm.
- cutting error: ±0.5-2 mm(depending on equipment).
- maximum size of manufactured part: 2770x2040 mm.
- Minimum size of manufactured part: 50x50 mm.
Minimum radii for edging:
- laminated chipboard16 mm:
- external not less than 50 mm;
- internal no less 80-100 mm.
- laminated chipboard25 mm:
- external no less 100 mm;
- internal no less 80-150 mm.
Price for cutting laminated chipboard
Minimum cost cutting services - 3000 rubles + cost of material.
| Chipboard thickness, mm | Price, rub/pm* |
| 8-18 | 35 |
| 22-25 | 42 |
| 32-50 | 85 |
*prices are indicative for a volume of more than 1200 rm, prices for cutting depending on the complexity of the order can be changed
Order cost (calculation of chipboard production according to customer dimensions)
Note! We cut laminated chipboards only from the Egger, Kronostar and Kronospan brands.
To receive an offer from us regarding the possibility and cost of an order, follow these steps:
Order execution time
Note! We calculate cuts only in weekdays! The period for calculating the cost of an order is from 1 to 3 working days.
Production time laminated chipboard parts amounts to 3-8 working days from the moment the client makes payment.
Due to the seasonal workload of production, the lead time may be extended. Please check with your manager for current order execution times.
Maybe accelerated execution order. In this case, the surcharge on the cost of the order for urgency is 10-30% ( but not less than 3000 rubles)
Where is custom-made chipboard made?
The production of orders is carried out in our workshops on the territory of warehouses located.
Here, I collected sufficient quantity material and decided to write another analytical note. This time the topic is sawing laminated chipboard without chipping.
There is a fairly fair opinion that it is possible to cut laminated chipboard cleanly only on professional equipment(that is, a format-cutting machine).
The whole highlight of this machine is that it has two saw blades, located strictly on the same axis. The first one cuts the chipboard, the second one cuts it right through.
The cost of this unit is about 700,000 - 1,000,000 rubles (of course, there are more expensive ones))). NOT VERY ACCEPTABLE FOR AN Amateur.
This is a good way to trim incorrectly marked parts, but you can’t cut the entire cabinet this way. Chips, of course, are present, but in an amount quite comparable to the formatter (it also, secretly, leaves a small number of small chips). A lot of hassle with markings. Only straight cuts can be made.
Method 5 - Fraser
Provides the cleanest possible edge to the workpiece, the quality is no different from the formatter, often even better.
With it, we first saw the workpiece with a jigsaw, retreating 2-3 mm from the marking line, and then align the line according to the template (I usually use a second piece of laminated chipboard, sawed on a format saw, of a suitable size). must be copying, that is, with a bearing.
Very clean cut. The possibility of making curved cuts, that is, making many, including several completely identical ones. Disadvantages - a lot of hassle: the need for precise marking, preliminary filing of workpieces, setting a template or tire for the router, that is, it is not very suitable for mass use.
